Use generic u64_stats_sync infrastructure to get proper 64bit stats,
even on 32bit arches, at no extra cost for 64bit arches.
Without this fix, 32bit arches can have some wrong counters at the time
the carry is propagated into upper word.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
An updater may interfer with the dumping of any of the object lists.
Fix this by using a per-net generation counter and use the
nl_dump_check_consistent() interface so the NLM_F_DUMP_INTR flag is set
to notify userspace that it has to restart the dump since an updater
has interfered.
This patch also replaces the existing consistency checking code in the
rule dumping path since it is broken. Basically, the value that the
dump callback returns is not propagated to userspace via
netlink_dump_start().
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The dump operation through netlink is not protected by the nfnl_lock.
Thus, a reader process can be dumping any of the existing object
lists while another process can be updating the list content.
This patch resolves this situation by protecting all the object
lists with RCU in the netlink dump path which is the reader side.
The updater path is already protected via nfnl_lock, so use list
manipulation RCU-safe operations.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Skip transaction handling for table updates with no changes in
the flags. This fixes a crash when passing the table flag with all
bits unset.
Reported-by: Ana Rey <anarey@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Based on RFC3810 6.2, we also need to check the hop limit and router alert
option besides source address.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add MIB counters for rcvbuferrors in UDP to help diagnose problems.
Signed-off-by: James M Leddy <james.leddy@redhat.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MSI-X should use PCI_MSIX_FLAGS not PCI_MSI_FLAGS.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull CIFS fixes from Steve French:
"Small set of misc cifs/smb3 fixes"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
[CIFS] fix mount failure with broken pathnames when smb3 mount with mapchars option
cifs: revalidate mapping prior to satisfying read_iter request with cache=loose
fs/cifs: fix regression in cifs_create_mf_symlink()
Pull networking fixes from David Miller:
1) Fix crash in ipvs tot_stats estimator, from Julian Anastasov.
2) Fix OOPS in nf_nat on netns removal, from Florian Westphal.
3) Really really really fix locking issues in slip and slcan tty write
wakeups, from Tyler Hall.
4) Fix checksum offloading in fec driver, from Fugang Duan.
5) Off by one in BPF instruction limit test, from Kees Cook.
6) Need to clear all TSO capability flags when doing software TSO in
tg3 driver, from Prashant Sreedharan.
7) Fix memory leak in vlan_reorder_header() error path, from Li
RongQing.
8) Fix various bugs in xen-netfront and xen-netback multiqueue support,
from David Vrabel and Wei Liu.
9) Fix deadlock in cxgb4 driver, from Li RongQing.
10) Prevent double free of no-cache DST entries, from Eric Dumazet.
11) Bad csum_start handling in skb_segment() leads to crashes when
forwarding, from Tom Herbert.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits)
net: fix setting csum_start in skb_segment()
ipv4: fix dst race in sk_dst_get()
net: filter: Use kcalloc/kmalloc_array to allocate arrays
trivial: net: filter: Change kerneldoc parameter order
trivial: net: filter: Fix typo in comment
net: allwinner: emac: Add missing free_irq
cxgb4: use dev_port to identify ports
xen-netback: bookkeep number of active queues in our own module
tg3: Change nvram command timeout value to 50ms
cxgb4: Not need to hold the adap_rcu_lock lock when read adap_rcu_list
be2net: fix qnq mode detection on VFs
of: mdio: fixup of_phy_register_fixed_link parsing of new bindings
at86rf230: fix irq setup
net: phy: at803x: fix coccinelle warnings
net/mlx4_core: Fix the error flow when probing with invalid VF configuration
tulip: Poll link status more frequently for Comet chips
net: huawei_cdc_ncm: increase command buffer size
drivers: net: cpsw: fix dual EMAC stall when connected to same switch
xen-netfront: recreate queues correctly when reconnecting
xen-netfront: fix oops when disconnected from backend
...
Dave Jones reported that a crash is occurring in
csum_partial
tcp_gso_segment
inet_gso_segment
? update_dl_migration
skb_mac_gso_segment
__skb_gso_segment
dev_hard_start_xmit
sch_direct_xmit
__dev_queue_xmit
? dev_hard_start_xmit
dev_queue_xmit
ip_finish_output
? ip_output
ip_output
ip_forward_finish
ip_forward
ip_rcv_finish
ip_rcv
__netif_receive_skb_core
? __netif_receive_skb_core
? trace_hardirqs_on
__netif_receive_skb
netif_receive_skb_internal
napi_gro_complete
? napi_gro_complete
dev_gro_receive
? dev_gro_receive
napi_gro_receive
It looks like a likely culprit is that SKB_GSO_CB()->csum_start is
not set correctly when doing non-scatter gather. We are using
offset as opposed to doffset.
Reported-by: Dave Jones <davej@redhat.com>
Tested-by: Dave Jones <davej@redhat.com>
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: 7e2b10c1e5 ("net: Support for multiple checksums with gso")
Acked-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Highlights include:
- Stable fix for a data corruption case due to incorrect cache validation
- Fix a couple of false positive cache invalidations
- Fix NFSv4 security negotiation issues
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJTq1GIAAoJEGcL54qWCgDyCfUP/3S7Py5Gocdqvb7FBPpCWtsb
PJlv1RjC4ngT+BJpBeDSOFEcZerfeQAwguL5kEgIjdyKmsAjVjIF7ThagNQK/0yr
qpeKh2EtbAipjjXVmul7saG3Ucuv/PggEhqGl9iJK0QyPdmnr30cHGHHt3kCIPGE
e4AkaCN4ZuXBdDOO4YpKzIl6wQPb0Gjwps1boW4INCvnBvK6Yno26Q6ilDf92gJE
hisEn0l8l09C6t2jZKP7daCyGForTYYlMxIbmjmQhsMEwnh1kmfpr/xuAQP2bflr
14OFrNbrZg3p4ucp8g7EzgS1Z5m/Ism0xNKfO4LgNwUobSgbvvvScAC3/LP2HIIk
RXuRhgb8u6pbWQRqq4XznB+csh6DGR/ui2PhonK4lJDaJxcU3bnFlhTgoC0GSyCa
Wbbdv+nhXhw5Xi9jsma6PW/CnHJH6sk/8KviRPOpC+RsCg+X41vTHzC4XvWbentw
aZGkNuWAnBKMyswu08E4+ScFQxToSB6ju4RjOsTTMleC0ewWXD3Y6FL+B5p4crPO
L05KCLkP+SeRxpakOM3e/x/bkVOa+DBna7foXUZ9snWybYoOmuxOkJgJT7bxrYaA
/3N0e/WUUgPR/bhdydMJSRo6DchKj+5GRSpx8FB9eMqqp8mNE+I61/Kq0dFEbtPQ
1IQCFT4w1PEegDpwjb0L
=o+QR
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-3.16-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client fixes from Trond Myklebust:
"Highlights include:
- Stable fix for a data corruption case due to incorrect cache
validation
- Fix a couple of false positive cache invalidations
- Fix NFSv4 security negotiation issues"
* tag 'nfs-for-3.16-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv4: test SECINFO RPC_AUTH_GSS pseudoflavors for support
NFS Return -EPERM if no supported or matching SECINFO flavor
NFS check the return of nfs4_negotiate_security in nfs4_submount
NFS: Don't mark the data cache as invalid if it has been flushed
NFS: Clear NFS_INO_REVAL_PAGECACHE when we update the file size
nfs: Fix cache_validity check in nfs_write_pageuptodate()
When IP route cache had been removed in linux-3.6, we broke assumption
that dst entries were all freed after rcu grace period. DST_NOCACHE
dst were supposed to be freed from dst_release(). But it appears
we want to keep such dst around, either in UDP sockets or tunnels.
In sk_dst_get() we need to make sure dst refcount is not 0
before incrementing it, or else we might end up freeing a dst
twice.
DST_NOCACHE set on a dst does not mean this dst can not be attached
to a socket or a tunnel.
Then, before actual freeing, we need to observe a rcu grace period
to make sure all other cpus can catch the fact the dst is no longer
usable.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dormando <dormando@rydia.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use kcalloc/kmalloc_array to make it clear we're allocating arrays. No
integer overflow can actually happen here, since len/flen is guaranteed
to be less than BPF_MAXINSNS (4096). However, this changed makes sure
we're not going to get one if BPF_MAXINSNS were ever increased.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change the order of the parameters to sk_unattached_filter_create() in
the kerneldoc to reflect the order they appear in the actual function.
This fix is only cosmetic, in the generated doc they still appear in the
correct order without the fix.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the mdio probe function fails in emac_open, the interrupt we just requested
isn't freed. If emac_open is called again, for example because we try to set up
the interface again, the kernel will oops because the interrupt wasn't properly
released.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: <stable@vger.kernel.org> # 3.11+
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 3f85944fe2 ("net: Add sysfs file
for port number") introduce dev_port to network devices. cxgb4 adapters
have multiple ports on the same PCI function, and used dev_id to
identify those ports. That use was removed by commit
8c367fcbe6 ("cxgb4: Do not set
net_device::dev_id to VI index"), since dev_id should be used only when
devices share the same MAC address.
Using dev_port for cxgb4 allows different ports on the same PCI function
to be identified.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The original code uses netdev->real_num_tx_queues to bookkeep number of
queues and invokes netif_set_real_num_tx_queues to set the number of
queues. However, netif_set_real_num_tx_queues doesn't allow
real_num_tx_queues to be smaller than 1, which means setting the number
to 0 will not work and real_num_tx_queues is untouched.
This is bogus when xenvif_free is invoked before any number of queues is
allocated. That function needs to iterate through all queues to free
resources. Using the wrong number of queues results in NULL pointer
dereference.
So we bookkeep the number of queues in xen-netback to solve this
problem. This fixes a regression introduced by multiqueue patchset in
3.16-rc1.
There's another bug in original code that the real number of RX queues
is never set. In current Xen multiqueue design, the number of TX queues
and RX queues are in fact the same. We need to set the numbers of TX and
RX queues to the same value.
Also remove xenvif_select_queue and leave queue selection to core
driver, as suggested by David Miller.
Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
CC: Ian Campbell <ian.campbell@citrix.com>
CC: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 506724c463 "tg3: Override clock,
link aware and link idle mode during NVRAM dump" changed the timeout
value for nvram command execution from 100ms to 1ms. But the 1ms
timeout value was only sufficient for nvram read operations but not
write operations for most of the devices supported by tg3 driver.
This patch sets the MAX to 50ms. Also it uses usleep_range instead
of udelay.
Signed-off-by: Prashant Sreedharan <prashant@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Suggested-by: David Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 648cd48c9e
The hwmon name attributes must not include '-' so the name must be
rename from gpio-fan to gpio_fan
Signed-off-by: Julien D'Ascenzio <jdascenzio@yahoo.fr>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
A new set of bug fixes for 3.16, containing patches for seven platforms:
at91:
- drivers/misc fix for Kconfig PWM symbol
- correction of several values in DT after conversion to CCF
- fix at91sam9261/at91sam9261ek mistake in slow crystal vs. slow RC osc
imx:
- Use GPIO for card CD/WP on imx51-babbage and eukrea-mbimxsd51,
because controller base CD/WP is not working in esdhc driver due to
runtime PM support
- A couple of random ventana gw5xxx board fixes
- Add IMX_IPUV3_CORE back to defconfig, which gets lost when moving
IPUv3 driver out of staging tree
- Fix enet/fec clock selection on imx6sl
- Fix display node on imx53-m53evk board
- A couple of Cubox-i updates from Russell, which were omitted from
the merge window due to dependency
integrator:
- fix an OF-related regression against 3.15
mvebu:
- mvebu (v7)
- Fix broken SoC ID detection
- Select ARM_CPU_SUSPEND for v7
- Remove armada38x compatible string (no users yet)
- Enable Dove SoC in mvebu_v7_defconfig
- kirkwood
- Fix phy-connection-type on GuruPlug board
qcom:
- enable gsbi driver in defconfig
- fix section mismatch warning in serial driver
samsung:
- use WFI macro in platform_do_lowpower because exynos cpuhotplug
includes a hardcoded WFI instruction and it causes compile error
in Thumb-2 mode.
- fix GIC reg sizes for exynos4 SoCs
- remove reset timer counter value during boot and resume for mct
to fix a big jump in printk timestamps
- fix pm code to check cortex-A9 for another exynos SoCs
- don't rely on firmware's secondary_cpu_start for mcpm
sti:
- Ethernet clocks were wrongly defined for STiH415/416 platforms
- STiH416 B2020 revision E DTS file name contained uppercase, change to
lowercase.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=fJMs
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"A new set of bug fixes for 3.16, containing patches for seven
platforms:
at91:
- drivers/misc fix for Kconfig PWM symbol
- correction of several values in DT after conversion to CCF
- fix at91sam9261/at91sam9261ek mistake in slow crystal vs. slow RC osc
imx:
- Use GPIO for card CD/WP on imx51-babbage and eukrea-mbimxsd51,
because controller base CD/WP is not working in esdhc driver due to
runtime PM support
- A couple of random ventana gw5xxx board fixes
- Add IMX_IPUV3_CORE back to defconfig, which gets lost when moving
IPUv3 driver out of staging tree
- Fix enet/fec clock selection on imx6sl
- Fix display node on imx53-m53evk board
- A couple of Cubox-i updates from Russell, which were omitted from
the merge window due to dependency
integrator:
- fix an OF-related regression against 3.15
mvebu:
- mvebu (v7)
- Fix broken SoC ID detection
- Select ARM_CPU_SUSPEND for v7
- Remove armada38x compatible string (no users yet)
- Enable Dove SoC in mvebu_v7_defconfig
- kirkwood
- Fix phy-connection-type on GuruPlug board
qcom:
- enable gsbi driver in defconfig
- fix section mismatch warning in serial driver
samsung:
- use WFI macro in platform_do_lowpower because exynos cpuhotplug
includes a hardcoded WFI instruction and it causes compile error
in Thumb-2 mode.
- fix GIC reg sizes for exynos4 SoCs
- remove reset timer counter value during boot and resume for mct
to fix a big jump in printk timestamps
- fix pm code to check cortex-A9 for another exynos SoCs
- don't rely on firmware's secondary_cpu_start for mcpm
sti:
- Ethernet clocks were wrongly defined for STiH415/416 platforms
- STiH416 B2020 revision E DTS file name contained uppercase, change to
lowercase"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (33 commits)
ARM: at91/dt: sam9261: remove slow RC osc
ARM: at91/dt: define sam9261ek slow crystal frequency
ARM: at91/dt: sam9261: correctly define mainck
ARM: at91/dt: sam9n12: correct PLLA ICPLL and OUT values
ARM: at91/dt: sam9x5: correct PLLA ICPLL and OUT values
misc: atmel_pwm: fix Kconfig symbols
ARM: integrator: fix OF-related regression
ARM: mvebu: Fix the improper use of the compatible string armada38x using a wildcard
ARM: dts: kirkwood: fix phy-connection-type for Guruplug
ARM: EXYNOS: Don't rely on firmware's secondary_cpu_start for mcpm
ARM: dts: imx51-eukrea-mbimxsd51-baseboard: unbreak esdhc.
ARM: dts: imx51-babbage: Fix esdhc setup
ARM: dts: mx5: Move the display out of soc {} node
ARM: dts: mx5: Fix IPU port node placement
ARM: mvebu: select ARM_CPU_SUSPEND for Marvell EBU v7 platforms
ARM: mvebu: Fix broken SoC ID detection
ARM: imx_v6_v7_defconfig: Enable CONFIG_IMX_IPUV3_CORE
ARM: multi_v7_defconfig: Add QCOM GSBI driver
ARM: stih41x: Rename stih416-b2020-revE.dts to stih416-b2020e.dts
tty: serial: msm: Fix section mismatch warning
...
- drivers/misc fix for Kconfig PWM symbol
- correction of several values in DT after conversion to CCF
- fix at91sam9261/at91sam9261ek mistake in slow crystal vs. slow RC osc
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJTqvVyAAoJEAf03oE53VmQz+sH/2Di3RkT90URl9bGIiIgYh/S
NYg8gpasHEdxMtiDGp6c7ie9EWpIK1ga1F0Iha0fwYEJE/WOmlqEQYhXuoJyxKpJ
lJ2lfprj7Z19RjA717g+Q2LbAshTI1K3HhP2d56o97KkdmcIB76Re5DoGL14Ez6A
TP0sCTCGWO+brjPPmzDY0la2HezjMKmOnxtdu4sbysHe6RT9b6JcEa1cFsT0nh4j
DKdeyDO/kAp6sbkprkv7WCGpa+6fvsPEsnioO3IlYJx4ayT4Uq64YqS5skuzQK74
7TdTSZoq0OM87t/zY2NR5MGSPoi48fP4Z2O+m/L9PVzROCK44eXBKe4lzOArxKQ=
=D+rW
-----END PGP SIGNATURE-----
Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixes
Merge "First AT91 fixes batch for 3.16" from Nicolas Ferre:
- drivers/misc fix for Kconfig PWM symbol
- correction of several values in DT after conversion to CCF
- fix at91sam9261/at91sam9261ek mistake in slow crystal vs. slow RC osc
* tag 'at91-fixes' of git://github.com/at91linux/linux-at91:
ARM: at91/dt: sam9261: remove slow RC osc
ARM: at91/dt: define sam9261ek slow crystal frequency
ARM: at91/dt: sam9261: correctly define mainck
ARM: at91/dt: sam9n12: correct PLLA ICPLL and OUT values
ARM: at91/dt: sam9x5: correct PLLA ICPLL and OUT values
misc: atmel_pwm: fix Kconfig symbols
Pull Ceph fix from Sage Weil:
"This fixes a corner case for cloned RBD images"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
rbd: handle parent_overlap on writes correctly
The at91sam9261 doesn't actually have a slow RC oscillator, remove it from the
dtsi.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
ICPLL can only take 0 or 1, it got mixed with OUT which can be in the [0-3]
range.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
ICPLL can only take 0 or 1, it got mixed with OUT which can be in the [0-3]
range.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
In commit 4cab259f, the emc1403 driver was converted to use regmap but the
necessary Kconfig option was not added.
Signed-off-by: Josef Gajdusek <atx@atx.name>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Murata Manufacturing Co., Ltd is the vendor for
NTC (Negative Temperature coefficient) based Thermistors.
But, the driver extensively uses "NTC" as the vendor name.
This patch corrects the vendor name also updates the
compatibility strings according to the vendor-prefix.txt
Note: Drivers continue to support the previous compatible strings
but further addition of these compatible strings in device tree
is deprecated.
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add Murata Manufacturing Co., Ltd. to the list of device tree
vendor prefixes.
Murata manufactures NTC (Negative Temperature Coefficient) based
Thermistors for small scale applications like Mobiles and PDAs.
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Current code is buggy, it shows the current fan speed as minimum fan speed.
Fix up show_fan_reg macro to correctly report fan and fan_min speed.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Kevin Lo <kevlo@kevlo.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Pull powerpc fixes and cleanups from Ben Herrenschmidt:
"Here are a handful or two of powerpc fixes and simple/trivial
cleanups. A bunch of them fix ftrace with the new ABI v2 in Little
Endian, the rest is a scattering of fairly simple things"
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc: Don't skip ePAPR spin-table CPUs
powerpc/module: Fix TOC symbol CRC
powerpc/powernv: Remove OPAL v1 takeover
powerpc/kmemleak: Do not scan the DART table
selftests/powerpc: Use the test harness for the TM DSCR test
powerpc/cell: cbe_thermal.c: Cleaning up a variable is of the wrong type
powerpc/kprobes: Fix jprobes on ABI v2 (LE)
powerpc/ftrace: Use pr_fmt() to namespace error messages
powerpc/ftrace: Fix nop of modules on 64bit LE (ABIv2)
powerpc/ftrace: Fix inverted check of create_branch()
powerpc/ftrace: Fix typo in mask of opcode
powerpc: Add ppc_global_function_entry()
powerpc/macintosh/smu.c: Fix closing brace followed by if
powerpc: Remove __arch_swab*
powerpc: Remove ancient DEBUG_SIG code
powerpc/kerenl: Enable EEH for IO accessors
Two cleanup patches removing code duplication that got introduced by changes in
rc1. Not fixing crashes, but I'd rather not carry the duplicate code until the
next merge window.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTp8fJAAoJECgfDbjSjVRpMt8H/j7UiV5x1lTzhFxSBgIioqWR
6eIzZTDHFOKWTT2Gh51s21+EkLZluDb7HZcWwTh8CMvawjbiJbhhLFiHDhDAWrWd
pBMNtkhVNiOzAvvmyk2MJPNG/UqhRORS/+ULkGhD38BgI4Q44DW2Za9aKrfMEL9+
GxN3s+IZbM2fMzWn3BCxfKs1XpbOZzO60PmmnuJ7ubhRSRZT0Ukr1vbAsKKD5tFY
LBwoBIx9cuprKJ1WAgbnVatgspNbTkXqH2ygQuZKO5hEt5lOzr8uFm6B+ylsQ7bu
WZWQbrMVuPnhmkRnbeZ13ItvF3yxnY5RYNScAp0aT0KUnMzZKpjY2KR409rmNcQ=
=JnGJ
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull vhost cleanups from Michael S Tsirkin:
"Two cleanup patches removing code duplication that got introduced by
changes in rc1. Not fixing crashes, but I'd rather not carry the
duplicate code until the next merge window"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost-scsi: don't open-code kvfree
vhost-net: don't open-code kvfree
race condition that happens between enabling/disabling syscall tracepoints
and new process creations (the check to go into the ptrace path for a process
can be set when it shouldn't, or not set when it should). Not a major bug
but one that should be fixed and even applied to stable.
The other two patches are cleanup/fixes that are not that critical, but
for an -rc1 release would be nice to have. They both deal with syscall
tracepoints.
It also includes a patch to introduce a new macro for the TRACE_EVENT()
format called __field_struct(). Originally, __field() was used to record
any variable into a trace event, but with the addition of setting the
"is signed" attribute, the check causes anything but a primitive variable
to fail to compile. That is, structs and unions can't be used as they
once were. When the "is signed" check was introduce there were only
primitive variables being recorded. But that will change soon and it
was reported that __field() causes build failures.
To solve the __field() issue, __field_struct() is introduced to allow
trace_events to be able to record complex types too.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTpxx+AAoJEKQekfcNnQGu8dQH/RWwKuq/SDqdqFrYM3y0MGtU
GpWTzaTYfhoO7FE2zNx3JQtfu5Zg+KPzavecEQqYJGdUvd5lopo+GR4TYQ2GIDdA
O4gBgXkxJjYCQ4x9INXf/U8Afd4tfCYSWik2zzWUZaJSLd6pMV/4XbqqZItZ7aqt
bxWa7CgmSMHmfsO5a3xWzX0ybPCmYw/+G15CZDGguoazO1FU6oFAnKnr86PGhquH
eIHzGAO7ka6k+hQwM1gzUi5vIN+OGBZ4HuJCFu/jqaJHMxW0lomL93Gruifk3l4v
r2ierd0FjMSrV1BzCWRR+diWq8W0xwOUutFd1eG3fKlKHZJn4oZfiUHsZw65PFQ=
=Idsk
-----END PGP SIGNATURE-----
Merge tag 'trace-fixes-v3.16-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing cleanups and fixes from Steven Rostedt:
"This includes three patches from Oleg Nesterov. The first is a fix to
a race condition that happens between enabling/disabling syscall
tracepoints and new process creations (the check to go into the ptrace
path for a process can be set when it shouldn't, or not set when it
should). Not a major bug but one that should be fixed and even
applied to stable.
The other two patches are cleanup/fixes that are not that critical,
but for an -rc1 release would be nice to have. They both deal with
syscall tracepoints.
It also includes a patch to introduce a new macro for the
TRACE_EVENT() format called __field_struct(). Originally, __field()
was used to record any variable into a trace event, but with the
addition of setting the "is signed" attribute, the check causes
anything but a primitive variable to fail to compile. That is,
structs and unions can't be used as they once were. When the "is
signed" check was introduce there were only primitive variables being
recorded. But that will change soon and it was reported that
__field() causes build failures.
To solve the __field() issue, __field_struct() is introduced to allow
trace_events to be able to record complex types too"
* tag 'trace-fixes-v3.16-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Add __field_struct macro for TRACE_EVENT()
tracing: syscall_regfunc() should not skip kernel threads
tracing: Change syscall_*regfunc() to check PF_KTHREAD and use for_each_process_thread()
tracing: Fix syscall_*regfunc() vs copy_process() race
AT91 symbols AT91SAM9263, AT91SAM9RL, and AT91SAM9G45 do not exist and this
patch changes them to their correct ARCH_* version.
These symbols are chosen instead of the SOC_* ones because this driver is not
converted to DT.
Anyway, the ATMEL_PWM symbol and the associated driver will be removed soon,
during the move to the PWM sub-system.
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Commit 59a53afe70 "powerpc: Don't setup
CPUs with bad status" broke ePAPR SMP booting. ePAPR says that CPUs
that aren't presently running shall have status of disabled, with
enable-method being used to determine whether the CPU can be enabled.
Fix by checking for spin-table, which is currently the only supported
enable-method.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Emil Medve <Emilian.Medve@Freescale.com>
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
The commit 71ec7c55ed introduced the magic symbol ".TOC." for ELFv2 ABI.
This symbol is built manually and has no CRC value computed. A zero value
is put in the CRC section to avoid modpost complaining about a missing CRC.
Unfortunately, this breaks the kernel module loading when the kernel is
relocated (kdump case for instance) because of the relocation applied to
the kcrctab values.
This patch compute a CRC value for the TOC symbol which will match the one
compute by the kernel when it is relocated - aka '0 - relocate_start' done in
maybe_relocated called by check_version (module.c).
Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Cc: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
In commit 27f4488872 "Add OPAL takeover from PowerVM" we added support
for "takeover" on OPAL v1 machines.
This was a mode of operation where we would boot under pHyp, and query
for the presence of OPAL. If detected we would then do a special
sequence to take over the machine, and the kernel would end up running
in hypervisor mode.
OPAL v1 was never a supported product, and was never shipped outside
IBM. As far as we know no one is still using it.
Newer versions of OPAL do not use the takeover mechanism. Although the
query for OPAL should be harmless on machines with newer OPAL, we have
seen a machine where it causes a crash in Open Firmware.
The code in early_init_devtree() to copy boot_command_line into cmd_line
was added in commit 817c21ad9a "Get kernel command line accross OPAL
takeover", and AFAIK is only used by takeover, so should also be
removed.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Fix nfs4_negotiate_security to create an rpc_clnt used to test each SECINFO
returned pseudoflavor. Check credential creation (and gss_context creation)
which is important for RPC_AUTH_GSS pseudoflavors which can fail for multiple
reasons including mis-configuration.
Don't call nfs4_negotiate in nfs4_submount as it was just called by
nfs4_proc_lookup_mountpoint (nfs4_proc_lookup_common)
Signed-off-by: Andy Adamson <andros@netapp.com>
[Trond: fix corrupt return value from nfs_find_best_sec()]
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Do not return RPC_AUTH_UNIX if SEINFO reply tests fail. This
prevents an infinite loop of NFS4ERR_WRONGSEC for non RPC_AUTH_UNIX mounts.
Without this patch, a mount with no sec= option to a server
that does not include RPC_AUTH_UNIX in the
SECINFO return can be presented with an attemtp to use RPC_AUTH_UNIX
which will result in an NFS4ERR_WRONG_SEC which will prompt the SECINFO
call which will again try RPC_AUTH_UNIX....
Signed-off-by: Andy Adamson <andros@netapp.com>
Tested-By: Steve Dickson <steved@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Now that we have functions such as nfs_write_pageuptodate() that use
the cache_validity flags to check if the data cache is valid or not,
it is a little more important to keep the flags in sync with the
state of the data cache.
In particular, we'd like to ensure that if the data cache is empty, we
don't start marking it as needing revalidation.
Reported-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
In nfs_update_inode(), if the change attribute is seen to change on
the server, then we set NFS_INO_REVAL_PAGECACHE in order to make
sure that we check the file size.
However, if we also update the file size in the same function, we
don't need to check it again. So make sure that we clear the
NFS_INO_REVAL_PAGECACHE that was set earlier.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
NFS_INO_INVALID_DATA cannot be ignored, even if we have a delegation.
We're still having some problems with data corruption when multiple
clients are appending to a file and those clients are being granted
write delegations on open.
To reproduce:
Client A:
vi /mnt/`hostname -s`
while :; do echo "XXXXXXXXXXXXXXX" >>/mnt/file; sleep $(( $RANDOM % 5 )); done
Client B:
vi /mnt/`hostname -s`
while :; do echo "YYYYYYYYYYYYYYY" >>/mnt/file; sleep $(( $RANDOM % 5 )); done
What's happening is that in nfs_update_inode() we're recognizing that
the file size has changed and we're setting NFS_INO_INVALID_DATA
accordingly, but then we ignore the cache_validity flags in
nfs_write_pageuptodate() because we have a delegation. As a result,
in nfs_updatepage() we're extending the write to cover the full page
even though we've not read in the data to begin with.
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Cc: <stable@vger.kernel.org> # v3.11+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Pull aio fixes from Ben LaHaise:
"These fix a kernel memory disclosure issue (arbitrary kmap() &
copy_to_user()) revealed in CVE-2014-0206 by changes that were
introduced in v3.10"
* git://git.kvack.org/~bcrl/aio-fixes:
aio: fix kernel memory disclosure in io_getevents() introduced in v3.10
aio: fix aio request leak when events are reaped by userspace
Pull ARM fixes from Russell King:
"A number of low impact fixes, the most noticable one is the thumb2
frame pointer fix. We also fix a regression caused during this merge
window with ARM925 CPUs running with caches disabled, and fix a number
of warnings"
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: arm925: ensure assembly sets up writethrough mapping
ARM: perf: fix compiler warning with gcc 4.6.4 (and tidy code)
ARM: l2c: fix dependencies on PL310 errata symbols
ARM: 8069/1: Make thread_save_fp macro aware of THUMB2 mode
ARM: 8068/1: scoop: Remove unused variable