During system suspend, advertisement monitoring is disabled by setting
the HCI_VS_MSFT_LE_Set_Advertisement_Filter_Enable to False. This
disables the monitoring during suspend, however, if the controller is
monitoring a device, it sends HCI_VS_MSFT_LE_Monitor_Device_Event to
indicate that the monitoring has been stopped for that particular
device. This event may occur after suspend depending on the
low_threshold_timeout and peer device advertisement frequency, which
causes early wake up.
Right way to disable the monitoring for suspend is by removing all the
monitors before suspend and re-monitor after resume to ensure no events
are received during suspend. This patch fixes this suspend/resume issue.
Following tests are performed:
- Add monitors before suspend and make sure DeviceFound gets triggered
- Suspend the system and verify that all monitors are removed by kernel
but not Released by bluetoothd
- Wake up and verify that all monitors are added again and DeviceFound
gets triggered
Signed-off-by: Manish Mandlik <mmandlik@google.com>
Reviewed-by: Archie Pusaka <apusaka@google.com>
Reviewed-by: Miao-chen Chou <mcchou@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Since the hci_uart_register_device() call is the last thing we do in
h5_serdev_probe() we can simply directly return its return-value.
Cc: Archie Pusaka <apusaka@google.com>
Suggested-by: Archie Pusaka <apusaka@google.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The recently added H5_WAKEUP_DISABLE h5->flags flag gets checked in
h5_btrtl_open(), but it gets set in h5_serdev_probe() *after*
calling hci_uart_register_device() and thus after h5_btrtl_open()
is called, set this flag earlier.
Also on devices where suspend/resume involves fully re-probing the HCI,
runtime-pm suspend should not be used, make the runtime-pm setup
conditional on the H5_WAKEUP_DISABLE flag too.
This fixes the HCI being removed and then re-added every 10 seconds
because it was being reprobed as soon as it was runtime-suspended.
Fixes: 66f077dde7 ("Bluetooth: hci_h5: add WAKEUP_DISABLE flag")
Fixes: d9dd833cf6 ("Bluetooth: hci_h5: Add runtime suspend")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Archie Pusaka <apusaka@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This moves hci_debugfs_create_basic to hci_debugfs.c which is where all
the others debugfs entries are handled.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
bdev->evt_skb will get freed in the normal path and one error path
of mtk_hci_wmt_sync, while the other error paths do not free it,
which may cause a memleak. This bug is suggested by a static analysis
tool, please advise.
Fixes: e0b67035a9 ("Bluetooth: mediatek: update the common setup between MT7622 and other devices")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Any unprivileged user can attach N_HCI ldisc and send packets coming from a
virtual controller by using PTYs.
Require initial namespace CAP_NET_ADMIN to do that.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
if platform provide gpio connect to BT_EN reset pin of qca btsoc chip,
we can do hardware reset instead of usb port reset.
Signed-off-by: Tim Jiang <tjiang@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The skb in modified by hci_send_sco which pushes SCO headers thus
changing skb->len causing sco_sock_sendmsg to fail.
Fixes: 0771cbb3b9 ("Bluetooth: SCO: Replace use of memcpy_from_msg with bt_skb_sendmsg")
Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Passing NULL to PTR_ERR will result in 0 (success), also since the likes of
bt_skb_sendmsg does never return NULL it is safe to replace the instances of
IS_ERR_OR_NULL with IS_ERR when checking its return.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This adds support for BT_{SND,RCV}BUF so userspace can set MTU based on
the channel usage.
Fixes: https://github.com/bluez/bluez/issues/201
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This moves functions manipulating EIR/Adv Data to its own file so it
can be reused by other files.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This makes use of bt_skb_sendmmsg instead using memcpy_from_msg which
is not considered safe to be used when lock_sock is held.
Also make rfcomm_dlc_send handle skb with fragments and queue them all
atomically.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This makes use of bt_skb_sendmsg instead of allocating a different
buffer to be used with memcpy_from_msg which cause one extra copy.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This works similarly to bt_skb_sendmsg but can split the msg into
multiple skb fragments which is useful for stream sockets.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
bt_skb_sendmsg helps takes care of allocation the skb and copying the
the contents of msg over to the skb while checking for possible errors
so it should be safe to call it without holding lock_sock.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Syzbot hit general protection fault in h5_recv(). The problem was in
missing NULL check.
hu->serdev can be NULL and we cannot blindly pass &serdev->dev
somewhere, since it can cause GPF.
Fixes: d9dd833cf6 ("Bluetooth: hci_h5: Add runtime suspend")
Reported-and-tested-by: syzbot+7d41312fe3f123a6f605@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Currently *ven_data is being assigned the return from a kmalloc call but
the out-of-memory check is checking ven_data and not *ven_data. Fix this
by adding the missing dereference * operator,
Addresses-Coverity: ("Dereference null return")
Fixes: 70dd978952 ("Bluetooth: btintel: Define a callback to fetch codec config data")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This splits the msft_do_{open/close} to msft_do_{open/close} and
msft_{register/unregister}. With this change it is possible to retain
the MSFT extension info irrespective of controller power on/off state.
This helps bluetoothd to report correct 'supported features' of the
controller to the D-Bus clients event if the controller is off. It also
re-reads the MSFT info upon every msft_do_open().
The following test steps were performed.
1. Boot the test device and verify the MSFT support debug log in syslog.
2. Power off the controller and read the 'supported features', power on
and read again.
3. Restart the bluetoothd and verify the 'supported features' value.
Signed-off-by: Miao-chen Chou <mcchou@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Alain Michaud <alainm@chromium.org>
Signed-off-by: Manish Mandlik <mmandlik@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Define the callbacks required to support offload codecs
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Currently usb tranport is not allowed to suspend when SCO over
HCI tranport is active.
This patch shall enable the usb tranport to suspend when SCO
link use non-HCI transport.
Signed-off-by: Chethan T N <chethan.tumkur.narayan@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Allow user level process to enable / disable codec offload
feature through mgmt interface. By default offload codec feature
is disabled.
Signed-off-by: Kiran K <kiran.k@intel.com>
Reviewed-by: Chethan T N <chethan.tumkur.narayan@intel.com>
Reviewed-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In Enhanced_Setup_Synchronous_Command, add support for msbc
coding format
Signed-off-by: Kiran K <kiran.k@intel.com>
Reviewed-by: Chethan T N <chethan.tumkur.narayan@intel.com>
Reviewed-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Define callback function to get codec config data. In HFP offload
usecase, controllers need to be set codec details before opening SCO.
This callback function is used to fetch vendor specific codec config
data.
Signed-off-by: Kiran K <kiran.k@intel.com>
Reviewed-by: Chethan T N <chethan.tumkur.narayan@intel.com>
Reviewed-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
For HFP offload use case, codec needs to be configured
before opening SCO connection. This patch sends
HCI_CONFIGURE_DATA_PATH command to configure doec before
opening SCO connection.
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch allows user space to set the codec that needs to
be used for HFP offload use case. The codec details are cached and
the controller is configured before opening the SCO connection.
Signed-off-by: Kiran K <kiran.k@intel.com>
Reviewed-by: Chethan T N <chethan.tumkur.narayan@intel.com>
Reviewed-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
For Intel controllers supporting HFP offload usecase,
define a callback function to fetch data_path_id
Signed-off-by: Kiran K <kiran.k@intel.com>
Reviewed-by: Chethan T N <chethan.tumkur.narayan@intel.com>
Reviewed-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add BT_CODEC option for getsockopt systemcall to get the details
of offload codecs supported over SCO socket
Signed-off-by: Kiran K <kiran.k@intel.com>
Reviewed-by: Chethan T N <chethan.tumkur.narayan@intel.com>
Reviewed-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Read offload use cases supported by controller.
Signed-off-by: Kiran K <kiran.k@intel.com>
Reviewed-by: Chethan T N <chethan.tumkur.narayan@intel.com>
Reviewed-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Move reading of supported local codecs into a separate init function,
query codecs capabilities and cache the data
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Chethan T N <chethan.tumkur.narayan@intel.com>
Signed-off-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Before freeing struct sco_conn, all delayed timeout work should be
cancelled. Otherwise, sco_sock_timeout could potentially use the
sco_conn after it has been freed.
Additionally, sco_conn.timeout_work should be initialized when the
connection is allocated, not when the channel is added. This is
because an sco_conn can create channels with multiple sockets over its
lifetime, which happens if sockets are released but the connection
isn't deleted.
Fixes: ba316be1b6 ("Bluetooth: schedule SCO timeouts with delayed_work")
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In sco_conn_del, conn->sk is read while holding on to the
sco_conn.lock to avoid races with a socket that could be released
concurrently.
However, in between unlocking sco_conn.lock and calling sock_hold,
it's possible for the socket to be freed, which would cause a
use-after-free write when sock_hold is finally called.
To fix this, the reference count of the socket should be increased
while the sco_conn.lock is still held.
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The MediaTek chip support vendor specific HCI command(0xfc1a) to
change the public address. Add hdev->set_bdaddr handler for MediaTek
Chip. After doing a power cycle or MediaTek Bluetooth reset, BD_ADDR
will bring back the original one.
Signed-off-by: mark-yw.chen <mark-yw.chen@mediatek.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Boot address was not getting updated when controller is present
in boot mode which is required to move the controller from boot mode
to operation mode after firmware download. This patch reads boot address
even if controller is present in boot mode.
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cache Boot address present in firmware file which
is later used in Intel_Soft_Reset command to bring
controller from boot mode to operational mode.
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When connecting to a device using an RPA if the address has been
resolved by the controller (types 0x02 and 0x03) the identity address
shall be used as the actual RPA in the advertisement won't be visible
to the host.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Address types ADDR_LE_DEV_PUBLIC_RESOLVED and
ADDR_LE_DEV_RANDOM_RESOLVED shall be converted to ADDR_LE_PUBLIC and
ADDR_LE_RANDOM repectively since they are not safe to be used beyond
the scope of the events themselves.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When disconnecting the advertising shall be re-enabled only when the
connection role is slave/peripheral as the central role use advertising
to connect it could end up enabling the instance 0x00 if there are other
advertising instances.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The sco_send_frame() also takes lock_sock() during memcpy_from_msg()
call that may be endlessly blocked by a task with userfaultd
technique, and this will result in a hung task watchdog trigger.
Just like the similar fix for hci_sock_sendmsg() in commit
92c685dc5de0 ("Bluetooth: reorganize functions..."), this patch moves
the memcpy_from_msg() out of lock_sock() for addressing the hang.
This should be the last piece for fixing CVE-2021-3640 after a few
already queued fixes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch sets up set_quality_report callback for Intel to
set and reset the debug features.
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Joseph Hwang <josephsih@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch allows a user space process to enable/disable the quality
report events dynamically through the set experimental feature mgmt
interface.
Since the quality report feature needs to invoke the callback function
provided by the driver, i.e., hdev->set_quality_report, a valid
controller index is required.
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Joseph Hwang <josephsih@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch refactors the set_exp_feature with a feature table
consisting of UUIDs and the corresponding callback functions.
In this way, a new experimental feature setting function can be
simply added with its UUID and callback function.
Signed-off-by: Joseph Hwang <josephsih@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch supports the link statistics telemetry events for
intel controllers
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Chethan T N <chethan.tumkur.narayan@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Joseph Hwang <josephsih@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
To avoid the overhead on both the controller and the host, the
Intel link statistics telemetry events are disabled by default.
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Chethan T N <chethan.tumkur.narayan@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Joseph Hwang <josephsih@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Legacy (v2.0) controllers do not support Extended OOB Data used by SSP.
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Manish Mandlik
Hans de Goede
Luiz Augusto von Dentz
Dinghao Liu
Thadeu Lima de Souza Cascardo
tjiang@codeaurora.org
Pavel Skripkin
Colin Ian King
Miao-chen Chou
Kiran K
Chethan T N
Desmond Cheong Zhi Xi
mark-yw.chen
Max Chou
Wang ShaoBo
Takashi Iwai
Joseph Hwang
Brian Gix