Граф коммитов

523 Коммитов

Автор SHA1 Сообщение Дата
Christoph Hellwig dfb7dac3af [PATCH] unify sys_ptrace prototype
Make sure we always return, as all syscalls should.  Also move the common
prototype to <linux/syscalls.h>

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:20 -08:00
Jeff Garzik d61780c0d3 [PATCH] remove some more check_region stuff
Removed some more references to check_region().

I checked these changes into the 'checkreg' branch of
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6.git

The only valid references remaining are in:
drivers/scsi/advansys.c
drivers/scsi/BusLogic.c
drivers/cdrom/sbpcd.c
sound/oss/pss.c

  Remove last vestiges of ide_check_region()
  drivers/char/specialix: trim trailing whitespace
  drivers/char/specialix: eliminate use of check_region()
  Remove outdated and unused references to check_region()
  [sound oss] remove check_region() usage from cs4232, wavfront
  [netdrvr eepro] trim trailing whitespace
  [netdrvr eepro] remove check_region() usage

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:18 -08:00
Hugh Dickins 872fec16d9 [PATCH] mm: init_mm without ptlock
First step in pushing down the page_table_lock.  init_mm.page_table_lock has
been used throughout the architectures (usually for ioremap): not to serialize
kernel address space allocation (that's usually vmlist_lock), but because
pud_alloc,pmd_alloc,pte_alloc_kernel expect caller holds it.

Reverse that: don't lock or unlock init_mm.page_table_lock in any of the
architectures; instead rely on pud_alloc,pmd_alloc,pte_alloc_kernel to take
and drop it when allocating a new one, to check lest a racing task already
did.  Similarly no page_table_lock in vmalloc's map_vm_area.

Some temporary ugliness in __pud_alloc and __pmd_alloc: since they also handle
user mms, which are converted only by a later patch, for now they have to lock
differently according to whether or not it's init_mm.

If sources get muddled, there's a danger that an arch source taking
init_mm.page_table_lock will be mixed with common source also taking it (or
neither take it).  So break the rules and make another change, which should
break the build for such a mismatch: remove the redundant mm arg from
pte_alloc_kernel (ppc64 scrapped its distinct ioremap_mm in 2.6.13).

Exceptions: arm26 used pte_alloc_kernel on user mm, now pte_alloc_map; ia64
used pte_alloc_map on init_mm, now pte_alloc_kernel; parisc had bad args to
pmd_alloc and pte_alloc_kernel in unused USE_HPPA_IOREMAP code; ppc64
map_io_page forgot to unlock on failure; ppc mmu_mapin_ram and ppc64 im_free
took page_table_lock for no good reason.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:40 -07:00
Russell King d052d1beff Create platform_device.h to contain all the platform device details.
Convert everyone who uses platform_bus_type to include
linux/platform_device.h.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-29 19:07:23 +01:00
Vitaly Bordug 1461b4ea2b [PATCH] ppc32: ppc_sys fixes for 8xx and 82xx
This patch fixes a numbers of issues regarding to that both 8xx and 82xx
began to use ppc_sys model:
	- Platform is now identified by default deviceless SOC, if no
BOARD_CHIP_NAME is specified in the bard-specific header. For the list
of supported names refer to (arch/ppc/syslib/) mpc8xx_sys.c and
mpc82xx_sys.c for 8xx and 82xx respectively.
	- Fixed a bug in identification by name - if the name was not found,
it returned -1 instead of default deviceless ppc_spec.
	- fixed devices amount in the 8xx platform system descriptions

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29 14:49:29 +10:00
Andy Fleming b37665e0ba [PATCH] ppc32: 85xx PHY Platform Update
This patch updates the 85xx platform code to support the new PHY Layer.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <Kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29 14:42:28 +10:00
Nicolas DET dd03d25fac [PATCH] chrp_pegasos_eth: Added Marvell Discovery II SRAM support
Add proper entry to support the Marvell MV64361 (Marvell Discovery II)
SRAM.

This feature may be used by the mv643xx_eth driver.

Signed-off-by: Nicolas DET <det.nicolas@free.fr>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29 14:41:08 +10:00
Olaf Hering 35e95e6399 [PATCH] ppc32: nvram driver for chrp
This implements a nvram acccess method, similar to
arch/ppc64/kernel/pSeries_nvram.c tested on CHRP B50.

Signed-off-by: Olaf Hering <olh@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29 14:35:00 +10:00
Roland Dreier 8b150478ae [PATCH] ppc: make phys_mem_access_prot() work with pfns instead of addresses
Change the phys_mem_access_prot() function to take a pfn instead of an
address.  This allows mmap64() to work on /dev/mem for addresses above 4G
on 32-bit architectures.  We start with a pfn in mmap_mem(), so there's no
need to convert to an address; in fact, it's actively bad, since the
conversion can overflow when the address is above 4G.

Similarly fix the ppc32 page_is_ram() function to avoid a conversion to an
address by directly comparing to max_pfn.  Working with max_pfn instead of
high_memory fixes page_is_ram() to give the right answer for highmem pages.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29 14:25:49 +10:00
Olaf Hering d49b340124 [PATCH] ppc32: update xmon help text
Mention a few more commands in xmon.  System.map processing was replaced
with kallsyms.

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29 14:12:39 +10:00
Marcelo Tosatti 434cc69fbb [PATCH] ppc32: #ifdef out ALTIVEC specific code in __switch_to
#ifdef out an ALTIVEC specific tweak in __switch_to()

Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29 13:55:43 +10:00
Matt Porter d5f7b06b03 [PATCH] ppc32: Cleanup AMCC PPC44x eval board U-Boot support
Cleanup PPC440 eval boards (bamboo, ebony, luan and ocotea) to better
support U-Boot as bootloader.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29 13:55:39 +10:00
Marcelo Tosatti e37b0c9670 [PATCH] ppc32 8xx: use io accessor macros instead of direct memory reference
Convert core 8xx drivers to use in_xxxbe/in_xxx macros instead of direct
memory references.

Other than making IO accesses explicit (which is a plus for readability), a
common set of macros provides a unified place for the volatile flag to
constraint compiler code reordering.

There are several unlucky places at the moment which lack the volatile
flag.

Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29 13:55:27 +10:00
Lee Nicks 9e3699ea7b [PATCH] ppc: prevent GCC 4 from generating AltiVec instructions in kernel
Depending on how GCC is built, GCC 4 may generate altivec instructions without
user explicitly requesting vector operations in the code.  Although this is a
performance booster for user applications, it is a problem for kernel.

This patch explicitly instruct GCC to NOT generate altivec instructions while
building the kernel.

Here are some test cases I ran.

(1) build gcc 4.0.1 with '--with-cpu=7450 --enable-altivec
    --enable-cxx-flags=-mcpu=7450', and use this gcc to build kernel WITHOUT
    this kernel patch.  Kernel fail to boot up on a 7450 board because of
    altivec instructions in kernel.

(2) build gcc 4.0.1 with "--with-cpu=7450 --enable-altivec
    --enable-cxx-flags=-mcpu=7450", and use this gcc to build kernel WITH this
    kernel patch.  Kernel boot up on a 7450 board without any problem.

(3) build gcc 4.0.1 with "--with-cpu=750 --enable-cxx-flags=-mcpu=750",
    and use this gcc to build kernel with or without this kernel patch.
    Kernel boot up on a 7450 board without any problem.

This patch should also work with GCC 3 or even earlier GCC 2.95.3.

Signed-off-by: Lee Nicks <allinux@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29 13:55:19 +10:00
Al Viro 53f9fc93f9 [PATCH] gfp_t: remaining bits of arch/*
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-28 08:16:51 -07:00
Al Viro 1ef64e670e [PATCH] gfp_t: sound
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-28 08:16:50 -07:00
Al Viro e82dd4d647 [PATCH] gfp_t: dma-mapping (ppc)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-28 08:16:48 -07:00
Kumar Gala 4b24b01c6c [PATCH] powerpc: Moved dcr support to arch/powerpc
Signed-off-by: Kumar K. Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 20:51:22 +10:00
David Gibson 25c8a78b1e [PATCH] powerpc: Fix handling of fpscr on 64-bit
The recent merge of fpu.S broken the handling of fpscr for
ARCH=powerpc and CONFIG_PPC64=y.  FP registers could be corrupted,
leading to strange random application crashes.

The confusion arises, because the thread_struct has (and requires) a
64-bit area to save the fpscr, because we use load/store double
instructions to get it in to/out of the FPU.  However, only the low
32-bits are actually used, so we want to treat it as a 32-bit quantity
when manipulating its bits to avoid extra load/stores on 32-bit.  This
patch replaces the current definition with a structure of two 32-bit
quantities (pad and val), to clarify things as much as is possible.
The 'val' field is used when manipulating bits, the structure itself
is used when obtaining the address for loading/unloading the value
from the FPU.

While we're at it, consolidate the 4 (!) almost identical versions of
cvt_fd() and cvt_df() (arch/ppc/kernel/misc.S,
arch/ppc64/kernel/misc.S, arch/powerpc/kernel/misc_32.S,
arch/powerpc/kernel/misc_64.S) into a single version in fpu.S.  The
new version takes a pointer to thread_struct and applies the correct
offset itself, rather than a pointer to the fpscr field itself, again
to avoid confusion as to which is the correct field to use.

Finally, this patch makes ARCH=ppc64 also use the consolidated fpu.S
code, which it previously did not.

Built for G5 (ARCH=ppc64 and ARCH=powerpc), 32-bit powermac (ARCH=ppc
and ARCH=powerpc) and Walnut (ARCH=ppc, CONFIG_MATH_EMULATION=y).
Booted on G5 (ARCH=powerpc) and things which previously fell over no
longer do.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 20:48:50 +10:00
Paul Mackerras c49888203d powerpc: Fixes to get the Longtrail CHRP a bit further
Talk about buggy firmware...  the OF on the Longtrail returns 0
from the claim client service rather than -1 when the claim fails.
It also has no device_type on the /memory node and blows up if
the output buffer for package-to-path is too big.

This also fixes a bug with calling alloc_up with align == 0, where
we did _ALIGN_UP(alloc_bottom, 0) which will end up as 0.

Lastly, we now check the return value (in r3) from calling the
prom, and return -1 from call_prom if we get a negative value back.
That is supposed to indicate that the requested client service
doesn't exist.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 21:52:53 +10:00
Paul Mackerras f9bd170a87 powerpc: Merge i8259.c into arch/powerpc/sysdev
This changes the parameters for i8259_init so that it takes two
parameters: a physical address for generating an interrupt
acknowledge cycle, and an interrupt number offset.  i8259_init
now sets the irq_desc[] for its interrupts; all the callers
were doing this, and that code is gone now.  This also defines
a CONFIG_PPC_I8259 symbol to select i8259.o for inclusion, and
makes the platforms that need it select that symbol.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 16:47:42 +10:00
Paul Mackerras 25635c71e4 ppc: Use the indirect_pci.c from arch/powerpc/sysdev
This defines a CONFIG_INDIRECT_PCI symbol to control whether it
gets used or not, and fixes the Kconfig to select that symbol for
platforms that need it.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 16:36:55 +10:00
Becky Bruce ab590ccb42 [PATCH] ppc: Fix m82xx_pci build
A recent patch updated the name of pci_assign_all_busses to
pci_assign_all_buses.  This instance of its use wasn't corrected
by the original patch to use the new name.

Builds cleanly on ads8272.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 15:55:06 +10:00
Paul Mackerras 85e568ea58 powerpc: Make coff boot wrapper load the kernel at 8M
Previously it claimed 7MB starting at the 9M point and loaded the
kernel there.  That meant that prom_init put the flattened device
tree above 16M.  On the 601 that caused the early device tree scan
to fail, since only 16MB are mapped with BATs on the 601.  Moving
this down to 8MB allows prom_init to put the flattened device tree
between 15M and 16M, so it works on the 601.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-23 17:26:32 +10:00
Paul Mackerras 5c8c56ebdf powerpc: Move agp_special_page export to where it is defined
... instead of exporting it in arch/*/kernel/ppc_ksyms.c.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-22 14:42:51 +10:00
David Gibson 6cb7bfebb1 [PATCH] powerpc: Merge thread_info.h
Merge ppc32 and ppc64 versions of thread_info.h.  They were pretty
similar already, the chief changes are:

	- Instead of inline asm to implement current_thread_info(),
which needs to be different for ppc32 and ppc64, we use C with an
asm("r1") register variable.  gcc turns it into the same asm as we
used to have for both platforms.
	- We replace ppc32's 'local_flags' with the ppc64
'syscall_noerror' field.  The noerror flag was in fact the only thing
in the local_flags field anyway, so the ppc64 approach is simpler, and
means we only need a load-immediate/store instead of load/mask/store
when clearing the flag.
	- In readiness for 64k pages, when THREAD_SIZE will be less
than a page, ppc64 used kmalloc() rather than get_free_pages() to
allocate the kernel stack.  With this patch we do the same for ppc32,
since there's no strong reason not to.
	- For ppc64, we no longer export THREAD_SHIFT and THREAD_SIZE
via asm-offsets, thread_info.h can now be safely included in asm, as
on ppc32.

Built and booted on G4 Powerbook (ARCH=ppc and ARCH=powerpc) and
Power5 (ARCH=ppc64 and ARCH=powerpc).

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-21 22:47:23 +10:00
Paul Mackerras 17a6392d30 powerpc/ppc/ppc64: Various compile fixes.
This declares powersave_nap in system.h and makes it an int everywhere,
fixes typos for the maple platform, fixes a couple of places where
I missed removing the last two arguments from a message_pass function,
and makes ppc64 consistent with ppc32 in the type of the
pci_bridge.cfg_data field.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20 21:10:09 +10:00
Paul Mackerras 399fe2bdd3 ppc: rename pci_assign_all_busses to pci_assign_all_buses
... for consistency with ppc64 and to make merging easier.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20 20:57:05 +10:00
David Gibson f7f6f4fea6 [PATCH] powerpc: Merge ppc64 pmc.[ch] with ppc32 perfmon.[ch]
This patches the ppc32 and ppc64 versions of the headers and .c files
with helper functions for manipulating the performance counting
hardware.  As a side effect, it removes use of the term "perfmon" from
ppc32, thus avoiding confusion with the unrelated performance counter
interface from HP Labs also called "perfmon".

Built, but not booted, for g5, pSeries, iSeries, and 32-bit Powermac
with both ARCH=powerpc and ARCH=ppc{,64} as appropriate.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20 16:22:24 +10:00
Kumar Gala 3d904eef54 [PATCH] ppc32: replace use of _GLOBAL with .globl for ppc32
The _GLOBAL() macro is for text symbols only. Changed to using
.globl for .data symbols.  This is also needed in ppc32 land
to allow FSL Book-E, 40x, and 44x to work.

Signed-off-by: Kumar K. Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20 09:43:34 +10:00
Paul Mackerras f2783c1500 powerpc: Merge time.c and asm/time.h.
We now use the merged time.c for both 32-bit and 64-bit compilation
with ARCH=powerpc, and for ARCH=ppc64, but not for ARCH=ppc32.
This removes setup_default_decr (folds its function into time_init)
and moves wakeup_decrementer into time.c.  This also makes an
asm-powerpc/rtc.h.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20 09:23:26 +10:00
Paul Mackerras 7ed476d17f ppc: Minor smp changes for consistency with ppc64
This makes platform code use the smp_ops variable directly instead
of ppc_md.smp_ops, removes the two unused `data' and `wait' arguments
from the *_message_pass() functions, and removes the call to the
never-implemented smp_ops->space_timers() function.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-19 21:44:51 +10:00
Paul Mackerras 77f543cb46 powerpc: Fix various compile errors with ARCH=ppc, ppc64 and powerpc
This makes ppc use the syscalls.c from arch/powerpc/kernel, exports
copy_and_flush from head_32.S for use by prom_init.c (ARCH=powerpc),
and consolidates the sys_fadvise64_64 implementations for 32-bit.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-18 14:19:41 +10:00
Stephen Rothwell 81e7009ea4 powerpc: merge ppc signal.c and ppc64 signal32.c
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-18 11:17:58 +10:00
Paul Mackerras 7ac59c6249 ppc: Fix various compile errors resulting from ptrace.c merge
This introduces flush_{fp,altivec,spe}_to_thread and fixes a
branch-too-far error in linking.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-17 20:12:39 +10:00
Paul Mackerras 3e63b9ec51 ppc: Use the merged of_device.c from arch/powerpc/kernel
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-17 20:11:03 +10:00
Paul Mackerras 30286ef6e0 powerpc: Merge syscalls.c and sys_ppc32.c.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-17 20:10:13 +10:00
Stephen Rothwell 7dffb72028 ppc32: use L1_CACHE_SHIFT/L1_CACHE_BYTES
instead of L1_CACHE_LINE_SIZE and LG_L1_CACHE_LINE_SIZE

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-17 11:50:32 +10:00
Stephen Rothwell e8a30302ab powerpc: merge ptrace.c
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-13 15:52:04 +10:00
Stephen Rothwell 4920960f57 powerpc: consolidate cputable.c
Also simplify arch/ppc64/kernel/Makefile

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-13 09:49:45 +10:00
Benjamin Herrenschmidt d8e998c58a [PATCH] ppc32: Tell userland about lack of standard TB
Glibc is about to get some new high precision timer stuff that relies on
the standard timebase of the PPC architecture.

However, some (rare & old) CPUs do not have such timebase and it is a
bit annoying to have your stuff just crash because you are running on
the wrong CPU...

This exposes to userland a CPU feature bit that tells that the current
processor doesn't have a standard timebase.  It's negative logic so that
glibc will still "just work" on older kernels (it will just be unhappy
on those old CPUs but that doesn't really matter as distro tend to
update glibc & kernel at the same time).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-12 08:24:47 -07:00
Paul Mackerras b6ec995a21 Merge from Linus' tree 2005-10-12 14:43:32 +10:00
Paolo Galtieri a0c111c631 [PATCH] ppc highmem fix
I've noticed that the calculations for seg_size and nr_segs in
__dma_sync_page_highmem() (arch/ppc/kernel/dma-mapping.c) are wrong.  The
incorrect calculations can result in either an oops or a panic when running
fsck depending on the size of the partition.

The problem with the seg_size calculation is that it can result in a
negative number if size is offset > size.  The problem with the nr_segs
caculation is returns the wrong number of segments, e.g.  it returns 1 when
size is 200 and offset is 4095, when it should return 2 or more.

Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11 09:46:54 -07:00
Paul Mackerras fd582ec88e ppc: Various minor compile fixes
This fixes up a variety of minor problems in compiling with ARCH=ppc
arising from using the merged versions of various header files.
A lot of the changes are just adding #include <asm/machdep.h> to
files that use ppc_md or smp_ops_t.

This also arranges for us to use semaphore.c, vecemu.c, vector.S and
fpu.S from arch/powerpc/kernel when compiling with ARCH=ppc.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-11 22:08:12 +10:00
Paul Mackerras 35d81a4bfe ppc: Adapt to asm-powerpc/irq.h irq_canonicalize changes
Now instead of having a ppc_md function, we just have a variable
which says whether to do the i8259 irq canonicalization or not,
and set that variable on the platforms that need that.  It looks
to me that radstone_ppc7d was trying to use irq canonicalization
for something else in a broken kind of way - it will need to be
fixed properly.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-11 22:03:09 +10:00
Paul Mackerras e574d238ab powerpc: Fix compilation for 32-bit configs
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:58:10 +10:00
Paul Mackerras daec962e27 powerpc: Use arch/powerpc/mm and arch/powerpc/lib for 64-bit
This also puts a copy of indirect_pci.c in arch/powerpc/sysdev
so that we don't need to build in arch/ppc/syslib.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:25:26 +10:00
Paul Mackerras b60fc8bbd2 powerpc: Make some #includes explicit.
In preparation for merging processor.h, this adds some explicit
but won't be after the merge.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 14:14:55 +10:00
Paul Mackerras 05f62a5c04 powerpc: Fix idle.c compile warning
This fixes a compile warning when using arch/ppc/kernel/idle.c
in a merged (ARCH=powerpc) kernel.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-06 13:29:24 +10:00
Benjamin Herrenschmidt 23cb8c297e [PATCH] ppc: Fix timekeeping with HZ=250 on some Mac models
Older Macs which uses the VIA chip timers to calibrate the timebase used
some code that wouldn't work if HZ wasn't divisible by 100...

This fixes it at least for 250.  Not totally perfect but should be
enough for now (so it at least works with the default value which is now
250).

There is still a potential issue with the core using CLOCK_TICK_RATE to
maintain xtime and CLOCK_TICK_RATE value on ppc32 is pure crap, but that
is a different problem, this patch at least brings us back to our
previous situation.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-05 07:33:42 -07:00
Paul Mackerras 6ce52e6438 ppc32: remove obsolete klock_info definition
klock_info isn't used or referenced anywhere else in the kernel.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-04 14:30:07 +10:00
Paul Mackerras dd8cad6be2 ppc32: export a few more things where they are defined
... and remove the exports from ppc_ksyms.c.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-04 14:28:29 +10:00
Sven Henkel 036bfdcb0d [PATCH] ppc32: Add new iBook 12" to PowerMac models table
This adds the new iBook G4 (manufactured after July 2005) to the
PowerMac models table.  The model name (PowerBook6,7) is taken from a
12" iBook, I don't know if it also matches the 14" version.  The patch
applies to a vanilla 2.6.13.2 kernel.

Signed-off-by: Sven Henkel <shenkel@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-01 17:01:48 -07:00
Stephen Rothwell dc1c1ca3dc powerpc: merge idle_power4.S and trapc.s
Use idle_power4.S from ppc64 as we are not going to support
32 bit power4 in the merged tree.

Merge ppc64 traps.c into powerpc traps.c:
	use ppc64 versions of exception routine names
		(as they don't have StudlyCaps)
	make all the versions if die() have the same
		prototype

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-01 18:43:42 +10:00
Benjamin Herrenschmidt a9487e48a3 [PATCH] pmac: fix cpufreq for old tipb 550Mhz
The old 550Mhz titanium powerbook can switch to a lower frequency
(500Mhz). A user has been repeately reporting overtemp conditions on his
machine at high speed so this simple patch adds support to PowerMac
cpufreq for this machine. The difference in frequency isn't big but seem
enough to fix that user's problems. The patch has been around for some
time now and doesn't seem to cause any problem, so I suppose it could go
in now.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Alain RICHARD <alain.richard@equation.fr>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30 17:20:20 -07:00
Al Viro 794fb8370d [PATCH] useless includes of linux/irq.h (arch/ppc)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30 08:54:02 -07:00
Stephen Rothwell ee400b63f3 powerpc: more cleanup of powerpc/kernel
Update head_64.S from arch/ppc64
Remove arc/ppc/kernel/fpu.S

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-30 18:04:06 +10:00
Stephen Rothwell dcff1b170b powerpc: remove old vector.S files
Update old kernel/Makefiles to cope

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-30 18:04:03 +10:00
Al Viro a7625d6e49 [PATCH] mv64x60 iomem annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-29 08:46:27 -07:00
Al Viro 9fcdfcd905 [PATCH] ppc32 ld.script fix for building on ppc64
In arch/ppc/boot/ld.script we need OUTPUT_ARCH(powerpc:common) for the
same reasons why we need it in vmlinux.lds.S; when we build on ppc64
box, we need to be explicit about the target.

See http://linus.bkbits.net:8080/linux-2.5/cset@1.1784.8.10 for the
corresponding fix in vmlinux.lds.S.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-29 08:46:27 -07:00
Paul Mackerras ab11d1ea28 Merge by hand from Linus' tree.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-29 13:13:36 +10:00
Benjamin Herrenschmidt f4208b9a95 [PATCH] ppc: fix stupid thinko in oprofile fix
I did something stupid in my oprofile fix, here's the obvious fix:

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-28 07:46:41 -07:00
Paul Mackerras 20c8c21063 powerpc: Fixes to get the merged kernel to boot on powermac.
This merges ppc_ksyms.c, puts back the actual do_execve call in
sys_execve, makes init_MMU call find_end_of_memory rather than
ppc_md.find_end_of_memory (every platform has a device tree
with a /memory node now, right?) and fixes some problems with the
mpic initialization on newworld powermacs.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 20:28:14 +10:00
Kumar Gala 400d221274 [PATCH] ppc32: make cur_cpu_spec a single pointer instead of an array
Changed ppc32 so that cur_cpu_spec is just a single pointer for all CPUs.
Additionally, made call_setup_cpu check to see if the cpu_setup pointer
is NULL or not before calling the function.  This lets remove the dummy
cpu_setup calls that just return.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 15:42:54 +10:00
Kumar Gala 10b35d9978 [PATCH] powerpc: merged asm/cputable.h
Merged cputable.h between ppc32 and ppc64.  In doing this removed support
for the BEGIN_FTR_SECTION/END_FTR_SECTION macros in C code since they
dont compile correctly.  C code should use cpu_has_feature().  This is
based on Arnd Bergmann's initial patch.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 15:42:53 +10:00
Paul Mackerras 14cf11af6c powerpc: Merge enough to start building in arch/powerpc.
This creates the directory structure under arch/powerpc and a bunch
of Kconfig files.  It does a first-cut merge of arch/powerpc/mm,
arch/powerpc/lib and arch/powerpc/platforms/powermac.  This is enough
to build a 32-bit powermac kernel with ARCH=powerpc.

For now we are getting some unmerged files from arch/ppc/kernel and
arch/ppc/syslib, or arch/ppc64/kernel.  This makes some minor changes
to files in those directories and files outside arch/powerpc.

The boot directory is still not merged.  That's going to be interesting.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 16:04:21 +10:00
Paul Mackerras e5baa396af Merge from Linus' tree. 2005-09-25 22:51:50 +10:00
Benjamin Herrenschmidt 0365ba7fb1 [PATCH] ppc64: SMU driver update & i2c support
The SMU is the "system controller" chip used by Apple recent G5 machines
including the iMac G5.  It drives things like fans, i2c busses, real time
clock, etc...

The current kernel contains a very crude driver that doesn't do much more
than reading the real time clock synchronously.  This is a completely
rewritten driver that provides interrupt based command queuing, a userland
interface, and an i2c/smbus driver for accessing the devices hanging off
the SMU i2c busses like temperature sensors.  This driver is a basic block
for upcoming work on thermal control for those machines, among others.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 22:17:35 -07:00
Benjamin Herrenschmidt 244bc050d5 [PATCH] ppc32: fix build with oprofile
Current -git tree doesn't build when enabling oprofile on a non-bookE CPU
(like on a PowerMac for example).  While there is no performance counter
support for these CPUs implemented yet, it's still nice to be able to use
the timer based sampling, and that got broken.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 22:17:34 -07:00
Kumar Gala 3fd07d3bf0 [PATCH] ppc32: Fix configuration of PCI IO space on MPC85xx platform
For platforms that don't have PCI IO at 0 the outbound window
registers were not being properly configured.

Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
Signed-off-by: Kumar K. Gala <kumar.gala@freescale.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 09:41:35 -07:00
Jon Loeliger b8f114db84 [PATCH] powerpc: Merge asm-ppc*/dma.h
This merges the asm-ppc*/dma.h files.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-22 21:03:33 +10:00
Becky Bruce 25433b123c [PATCH] powerpc: Merge bug.h
ppc32/ppc64: Merge bug.h into include/asm-powerpc

This patch merges bug.h into include/asm-powerpc.  Changed the data
structure for bug_entry such that line is always an int on both 32 and
64-bit platforms; removed casts to int from the 64-bit trap code to
reflect this.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Becky Bruce <Becky.Bruce@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-21 19:21:09 +10:00
linuxppc@jdl.com 3e57615bb5 [PATCH] powerpc: Revised merge asm-ppc*/hardirq.h
This is a revised patch to merge asm-ppc*/hardirq.h.
It removes some unnecessary #includes, but then requires
the addition of #include <asm/irq.h> in PPC32's hw_irq.h
much like ppc64 already does.  Furthermore, several
unnecessary #includes were removed from some ppc32 boards
in order to break resulting bad #include cycles.

Builds pSeries_defconfig and all ppc32 platforms except
the already b0rken bseip.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-21 19:21:09 +10:00
Stephen Rothwell 82cd02c16b [PATCH] powerpc: reduce oprofile/common.c differences
Rename and slightly modify {request,free}_perfmon_irq in the ppc code.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-21 19:21:08 +10:00
Stephen Rothwell 86a5cddbd9 [PATCH] powerpc: merge the rest of arch/ppc*/oprofile
- merge common.c
- move model specific files
- remove stub Makefiles
- clean up arch/ppc*/Makefile

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-21 19:21:08 +10:00
Stephen Rothwell 654810ec89 [PATCH] powerpc: merge oprofile headers
Merge include/asm-ppc64/oprofile_ipml.h and arch/ppc/oprofile/op_impl.h
into include/asm-powerpc/oprofile_ipml.h

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-21 19:21:08 +10:00
Stephen Rothwell a3e48c10cc [PATCH] powerpc: rename op_ppc{32,64}_model to op_powerpc_model
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-21 19:21:08 +10:00
Stephen Rothwell d9e5b83b12 [PATCH] Merge arch/ppc*/oprofile/Makefile into arch/powerpc/oprofile
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-21 19:21:08 +10:00
Stephen Rothwell bcdd1ea350 [PATCH] powerpc: Move arch/ppc*/oprofile/Kconfig to arch/powerpc
These files are identical.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-21 19:21:08 +10:00
Stephen Rothwell 564ee7a566 [PATCH] powerpc: Move arch/ppc*/kernel/vecemu.c to arch/powerpc
This file is the same in both architectures so create arch/powerpc/kernel
and move it there.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-21 19:21:07 +10:00
Kumar Gala da0825fd20 [PATCH] ppc32: Allow user to individual select CHRP/PMAC/PREP config
Made the CHRP/PMAC/PREP config options selectable by the user.
This allows us to build kernels specifically for one of the
platforms thus reducing code size.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-21 19:21:07 +10:00
Paul Mackerras a21ead3239 Revert "[PATCH] ppc32: Allow user to individual select CHRP/PMAC/PREP config"
This reverts df0d3cecc4 commit.
2005-09-21 18:47:00 +10:00
Kumar Gala df0d3cecc4 [PATCH] ppc32: Allow user to individual select CHRP/PMAC/PREP config
Made the CHRP/PMAC/PREP config options selectable by the user.
This allows us to build kernels specifically for one of the
platforms thus reducing code size.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-19 09:38:50 +10:00
Jon Loeliger 6c45ab992e [PATCH] powerpc: Remove section free() and linker script bits
Here is a new patch that removes all notion of the pmac, prep,
chrp and openfirmware initialization sections, and then unifies
the sections.h files without those __pmac, etc, sections identifiers
cluttering things up.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-19 09:38:49 +10:00
Jon Loeliger f495a8bfd6 [PATCH] powerpc: Remove sections use from ppc
Here is a new patch that removes all notion of the pmac, prep,
chrp and openfirmware initialization sections, and then unifies
the sections.h files without those __pmac, etc, sections identifiers
cluttering things up.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-19 09:38:49 +10:00
Kumar Gala 7da8f8600a [PATCH] ppc32: Removed non-inlined versions of local_irq* functions
We always use the inlined versions of local_irq_enable, local_irq_disable,
local_save_flags_ptr, and local_irq_restore on ppc32 so the non-inlined
versions where just taking up space.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-19 09:38:49 +10:00
Kumar Gala 5f7c690728 [PATCH] powerpc: Merged ppc_asm.h
Merged ppc_asm.h between ppc32 & ppc64.  The majority of the file is
common between the two architectures excluding how a single GPR is
saved/restored and which GPRs are non-volatile.

Additionally, moved the ASM_CONST macro used on ppc64 into ppc_asm.h.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-19 09:38:49 +10:00
Vitaly Bordug 514ccd4e6c [PATCH] ppc32: Add ppc_sys descriptions for PowerQUICC I devices
Added ppc_sys device and system definitions for PowerQUICC I devices.  This
will allow drivers for PQI to be proper platform device drivers.  Currently
sys section contains only MPC885 and MPC866.  Identification should be done
with identify_ppc_sys_by_name call, with board-specific "name" string
passed, since PQI do not have any register that could identify the SOC.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-17 11:50:01 -07:00
Richard Purdie e36d394deb [PATCH] Fix up some pm_message_t types
Fix up some pm_message_t types

Signed-Off-By: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-17 11:50:00 -07:00
David S. Miller 4db2ce0199 [LIB]: Consolidate _atomic_dec_and_lock()
Several implementations were essentialy a common piece of C code using
the cmpxchg() macro.  Put the implementation in one spot that everyone
can share, and convert sparc64 over to using this.

Alpha is the lone arch-specific implementation, which codes up a
special fast path for the common case in order to avoid GP reloading
which a pure C version would require.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-14 21:47:01 -07:00
Kumar Gala 873d3469db [PATCH] ppc32: remove use of asm/segment.h
Removed ppc32 architecture specific users of asm/segment.h and
asm-ppc/segment.h itself

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 08:22:28 -07:00
Tom Rini 6a00cbfcf8 [PATCH] ppc32: discard *.exit.text and *.exit.data sections
Discard *.exit.text sections on runtime.  We cannot do this on link time
because of the way BUG macros are implemented.  If "__exit function" calls
one of those macros, __bug_table section will reference this function.
This is similar to ".altinstructions" situation on i386.

*.exit.data seems to be OK in this respect and is discarded on link
time.

Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Tom Rini <trini@kernel.crashing.org>
Acked-by: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 08:22:28 -07:00
Sam Ravnborg 5bb7826900 kbuild: rename prepare to archprepare to fix dependency chain
When introducing the generic asm-offsets.h support the dependency
chain for the prepare targets was changed. All build scripts expecting
include/asm/asm-offsets.h to be made when using the prepare target would broke.
With the limited number of prepare targets left in arch Makefiles
the trivial solution was to introduce a new arch specific target: archprepare

The dependency chain looks like this now:

prepare
  |
  +--> prepare0
         |
         +--> archprepare
                |
		+--> scripts_basic
                +--> prepare1
                       |
                       +---> prepare2
                               |
                               +--> prepare3

So prepare 3 is processed before prepare2 etc.
This guaantees that the asm symlink, version.h, scripts_basic
are all updated before archprepare is processed.

prepare0 which build the asm-offsets.h file will need the
actions performed by archprepare.

The head target is now named prepare, because users scripts will most
likely use that target, but prepare-all has been kept for compatibility.
Updated Documentation/kbuild/makefiles.txt.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-09-11 22:30:22 +02:00
Stephen Rothwell b35b707217 [PATCH] powerpc: Move include3 to arch/$(ARCH)/include
This is less troublesome and makes more sense.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 10:15:12 -07:00
Paul Mackerras 31139971b3 [PATCH] ppc32: support hotplug cpu on powermacs
This allows cpus to be off-lined on 32-bit SMP powermacs.  When a cpu
is off-lined, it is put into sleep mode with interrupts disabled.  It
can be on-lined again by asserting its soft-reset pin, which is
connected to a GPIO pin.

With this I can off-line the second cpu in my dual G4 powermac, which
means that I can then suspend the machine (the suspend/resume code
refuses to suspend if more than one cpu is online, and making it cope
with multiple cpus is surprisingly messy).

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 10:15:11 -07:00
Paul Mackerras bb0bb3b659 [PATCH] ppc32: Kill init on unhandled synchronous signals
This is a patch that I have had in my tree for ages.  If init causes
an exception that raises a signal, such as a SIGSEGV, SIGILL or
SIGFPE, and it hasn't registered a handler for it, we don't deliver
the signal, since init doesn't get any signals that it doesn't have a
handler for.  But that means that we just return to userland and
generate the same exception again immediately.  With this patch we
print a message and kill init in this situation.

This is very useful when you have a bug in the kernel that means that
init doesn't get as far as executing its first instruction. :)
Without this patch the system hangs when it gets to starting the
userland init; with it you at least get a message giving you a clue
about what has gone wrong.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 10:15:11 -07:00
Adrian Bunk 338cec3253 [PATCH] merge some from Rusty's trivial patches
This patch contains the most trivial from Rusty's trivial patches:
- spelling fixes
- remove duplicate includes

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 10:06:30 -07:00
Thomas Gleixner 2830e21eb3 [PATCH] PPC: C99 initializers for hw_interrupt_type structures
Convert the initializers of hw_interrupt_type structures to C99 initializers.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 10:06:27 -07:00
Ingo Molnar fb1c8f93d8 [PATCH] spinlock consolidation
This patch (written by me and also containing many suggestions of Arjan van
de Ven) does a major cleanup of the spinlock code.  It does the following
things:

 - consolidates and enhances the spinlock/rwlock debugging code

 - simplifies the asm/spinlock.h files

 - encapsulates the raw spinlock type and moves generic spinlock
   features (such as ->break_lock) into the generic code.

 - cleans up the spinlock code hierarchy to get rid of the spaghetti.

Most notably there's now only a single variant of the debugging code,
located in lib/spinlock_debug.c.  (previously we had one SMP debugging
variant per architecture, plus a separate generic one for UP builds)

Also, i've enhanced the rwlock debugging facility, it will now track
write-owners.  There is new spinlock-owner/CPU-tracking on SMP builds too.
All locks have lockup detection now, which will work for both soft and hard
spin/rwlock lockups.

The arch-level include files now only contain the minimally necessary
subset of the spinlock code - all the rest that can be generalized now
lives in the generic headers:

 include/asm-i386/spinlock_types.h       |   16
 include/asm-x86_64/spinlock_types.h     |   16

I have also split up the various spinlock variants into separate files,
making it easier to see which does what. The new layout is:

   SMP                         |  UP
   ----------------------------|-----------------------------------
   asm/spinlock_types_smp.h    |  linux/spinlock_types_up.h
   linux/spinlock_types.h      |  linux/spinlock_types.h
   asm/spinlock_smp.h          |  linux/spinlock_up.h
   linux/spinlock_api_smp.h    |  linux/spinlock_api_up.h
   linux/spinlock.h            |  linux/spinlock.h

/*
 * here's the role of the various spinlock/rwlock related include files:
 *
 * on SMP builds:
 *
 *  asm/spinlock_types.h: contains the raw_spinlock_t/raw_rwlock_t and the
 *                        initializers
 *
 *  linux/spinlock_types.h:
 *                        defines the generic type and initializers
 *
 *  asm/spinlock.h:       contains the __raw_spin_*()/etc. lowlevel
 *                        implementations, mostly inline assembly code
 *
 *   (also included on UP-debug builds:)
 *
 *  linux/spinlock_api_smp.h:
 *                        contains the prototypes for the _spin_*() APIs.
 *
 *  linux/spinlock.h:     builds the final spin_*() APIs.
 *
 * on UP builds:
 *
 *  linux/spinlock_type_up.h:
 *                        contains the generic, simplified UP spinlock type.
 *                        (which is an empty structure on non-debug builds)
 *
 *  linux/spinlock_types.h:
 *                        defines the generic type and initializers
 *
 *  linux/spinlock_up.h:
 *                        contains the __raw_spin_*()/etc. version of UP
 *                        builds. (which are NOPs on non-debug, non-preempt
 *                        builds)
 *
 *   (included on UP-non-debug builds:)
 *
 *  linux/spinlock_api_up.h:
 *                        builds the _spin_*() APIs.
 *
 *  linux/spinlock.h:     builds the final spin_*() APIs.
 */

All SMP and UP architectures are converted by this patch.

arm, i386, ia64, ppc, ppc64, s390/s390x, x64 was build-tested via
crosscompilers.  m32r, mips, sh, sparc, have not been tested yet, but should
be mostly fine.

From: Grant Grundler <grundler@parisc-linux.org>

  Booted and lightly tested on a500-44 (64-bit, SMP kernel, dual CPU).
  Builds 32-bit SMP kernel (not booted or tested).  I did not try to build
  non-SMP kernels.  That should be trivial to fix up later if necessary.

  I converted bit ops atomic_hash lock to raw_spinlock_t.  Doing so avoids
  some ugly nesting of linux/*.h and asm/*.h files.  Those particular locks
  are well tested and contained entirely inside arch specific code.  I do NOT
  expect any new issues to arise with them.

 If someone does ever need to use debug/metrics with them, then they will
  need to unravel this hairball between spinlocks, atomic ops, and bit ops
  that exist only because parisc has exactly one atomic instruction: LDCW
  (load and clear word).

From: "Luck, Tony" <tony.luck@intel.com>

   ia64 fix

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjanv@infradead.org>
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Cc: Matthew Wilcox <willy@debian.org>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Mikael Pettersson <mikpe@csd.uu.se>
Signed-off-by: Benoit Boissinot <benoit.boissinot@ens-lyon.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 10:06:21 -07:00
Linus Torvalds 486a153f0e Merge master.kernel.org:/pub/scm/linux/kernel/git/sam/kbuild 2005-09-09 15:46:49 -07:00
Ingo Molnar a9f6a0dd54 [PATCH] more SPIN_LOCK_UNLOCKED -> DEFINE_SPINLOCK conversions
This converts the final 20 DEFINE_SPINLOCK holdouts.  (another 580 places
are already using DEFINE_SPINLOCK).  Build tested on x86.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 14:03:48 -07:00
Ingo Molnar 8d06afab73 [PATCH] timer initialization cleanup: DEFINE_TIMER
Clean up timer initialization by introducing DEFINE_TIMER a'la
DEFINE_SPINLOCK.  Build and boot-tested on x86.  A similar patch has been
been in the -RT tree for some time.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 14:03:48 -07:00
Tom Rini 95409aaca7 [PATCH] ppc32: Kill PVR_440* defines
The following patch changes the usages of PVR_440* into strcmp's with the
cpu_name field, and removes the defines altogether.  The Ebony portion was
briefly tested long ago.  One benefit of moving from PVR-tests to string
tests in general is that not all CPUs can be on and be able to do this type
of comparison.

See http://patchwork.ozlabs.org/linuxppc/patch?id=1250 for the original
thread.

Signed-off-by: Tom Rini <trini@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:29 -07:00
Tom Rini 66b375bf7d [PATCH] ppc32: In the boot code, don't rely on BASE_BAUD directly
Modifies serial_init to get base baud rate from the rs_table entry instead
of BAUD_BASE.  This patch eliminates duplication between the
SERIAL_PORT_DFNS macro and BAUD_BASE.  Without the patch, if a port set the
baud rate in SERIAL_PORT_DFNS, but did not update BASE_BAUD, the BASE_BAUD
value would still be used.

Signed-off-by: Grant Likely <grant.likely@gdcanada.com>
Signed-off-by: Tom Rini <trini@kernel.crashing.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:29 -07:00
Frank van Maarseveen 99cc219213 [PATCH] ppc32: Correct an instruction in the boot code
In the flush and invalidate bootcode on PPC4xx we were accidentally using
the wrong instruction.  Use cmplw, which reads from a register like we
want.

Signed-off-by: Tom Rini <trini@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:29 -07:00
Marcelo Tosatti 83f7da8acd [PATCH] ppc32: make perfmon.o CONFIG_E500 specific
Subject says it all, there is no need to link perfmon.o on
sub-architectures other than CONFIG_E500.

Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:29 -07:00
Kumar Gala 7f6fd5db2d [PATCH] ppc32: Fix Kconfig mismerge
Looks like the help comment for MPC834x got merged incorrectly.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:26 -07:00
Sam Ravnborg 0013a85454 kbuild: m68k,parisc,ppc,ppc64,s390,xtensa use generic asm-offsets.h support
Delete obsoleted parts form arch makefiles and rename to asm-offsets.h

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-09-09 20:57:26 +02:00
jdl@freescale.com 64807081e3 [PATCH] powerpc: Make check_bugs() static inline
Make check_bugs() static inline and remove it from syscalls.c.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-09 22:11:35 +10:00
Linus Torvalds 7bbedd5213 Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6 2005-09-08 15:55:23 -07:00
Linus Torvalds 0db7443b2b Merge master.kernel.org:/home/rmk/linux-2.6-serial 2005-09-08 15:30:14 -07:00
Andrew Morton 8fdc23ee1a [PATCH] PCI: fix up pretty-names removal patch
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08 14:57:24 -07:00
Russell King 6df29debb7 [SERIAL] Use an enum for serial8250 platform device IDs
Rather than hard-coding the platform device IDs, enumerate them.
We don't particularly care about the actual ID we get, just as
long as they're unique.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-08 16:04:41 +01:00
Kumar Gala 5aa3b610a7 [PATCH] ppc32: Fix head_4xx.S compile error
head_4xx.S wasn't compiling due to a missing #endif

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-08 07:35:33 -07:00
viro@ZenIV.linux.org.uk a08b6b7968 [PATCH] Kconfig fix (BLK_DEV_FD dependencies)
Sanitized and fixed floppy dependencies: split the messy dependencies for
BLK_DEV_FD by introducing a new symbol (ARCH_MAY_HAVE_PC_FDC), making
BLK_DEV_FD depend on that one and taking declarations of ARCH_MAY_HAVE_PC_FDC
to arch/*/Kconfig.  While we are at it, fixed several obvious cases when
BLK_DEV_FD should have been excluded (architectures lacking asm/floppy.h
are *not* going to have floppy.c compile, let alone work).

If you can come up with better name for that ("this architecture might
have working PC-compatible floppy disk controller"), you are more than
welcome - just s/ARCH_MAY_HAVE_PC_FDC/your_prefered_name/g in the patch
below...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 17:17:12 -07:00
john stultz b149ee2233 [PATCH] NTP: ntp-helper functions
This patch cleans up a commonly repeated set of changes to the NTP state
variables by adding two helper inline functions:

ntp_clear(): Clears the ntp state variables

ntp_synced(): Returns 1 if the system is synced with a time server.

This was compile tested for alpha, arm, i386, x86-64, ppc64, s390, sparc,
sparc64.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:34 -07:00
Eugene Surovegin 842363ff5f [PATCH] ppc32: fix ocp_device_suspend to use pm_message_t instead of u32
Recent "u32 -> pm_message_t" change triggered hidden bug in
ocp_device_suspend.  Fix it to correctly use pm_message_t instead of u32.

Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:15 -07:00
Pavel Machek ca078bae81 [PATCH] swsusp: switch pm_message_t to struct
This adds type-checking to pm_message_t, so that people can't confuse it
with int or u32.  It also allows us to fix "disk yoyo" during suspend (disk
spinning down/up/down).

[We've tried that before; since that cpufreq problems were fixed and I've
tried make allyes config and fixed resulting damage.]

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Alexander Nyberg <alexn@telia.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:16 -07:00
Pavel Machek 829ca9a30a [PATCH] swsusp: fix remaining u32 vs. pm_message_t confusion
Fix remaining bits of u32 vs.  pm_message confusion.  Should not break
anything.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:15 -07:00
Mark A. Greer f54bef9e9c [PATCH] ppc32: cpci690 updates
Update the cpci690 platform code:
- pass mem size in from bootwrapper via bi_rec
- some minor fixups

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:01 -07:00
Mark A. Greer f4c6cc8d1e [PATCH] ppc32: katana updates
Update the katana platform support code:
- if booted as zImage, pass mem size in via bi_req from bootwrapper
- if booted as uImage, get mem size from bd_info passed in from u-boot
- add support for 82544 present on katana 752i's
- set cacheline size on pci devices
- some minor fixups

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:00 -07:00
Mark A. Greer d01c08c9ae [PATCH] ppc32: mv64x60 updates & enhancements
Updates and enhancement to the ppc32 mv64x60 code:
- move code to get mem size from mem ctlr to bootwrapper
- address some errata in the mv64360 pic code
- some minor cleanups
- export one of the bridge's regs via sysfs so user daemon can watch for
  extraction events

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:00 -07:00
Kumar Gala bbde630b55 [PATCH] ppc32: Added cputable entry for 7448
Added cputable entry for 7448 as well adding it to checks for saving and
restoring of cpu state.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:00 -07:00
Eugene Surovegin e8834801bf [PATCH] ppc32: export cacheable_memcpy()
Add declaration and cacheable_memcpy().  I'll be needing this function in
new 4xx EMAC driver I'm going to submit to netdev soon.

IMHO, the better place for the declaration would be asm-powerpc/string.h,
unfortunately, ppc64 doesn't have this function, so asm-ppc/system.h is the
next best place.

Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:00 -07:00
Eugene Surovegin 3a0a401b40 [PATCH] ppc32: add dcr_base field to ocp_func_mal_data
Add dcr_base field to ocp_func_mal_data.  This is preparation step for the
new EMAC driver.

Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:00 -07:00
Eugene Surovegin 28fa031e76 [PATCH] ppc32: move 4xx PHY_MODE_XXX defines to ibm_ocp.h
Move 4xx PHY_MODE_XXX defines to asm-ppc/ibm_ocp.h.  This is a preparation
step for the new EMAC driver.

Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:59 -07:00
Arthur Othieno 7c31625aa8 [PATCH] ppc32: Add cputable entry for 750CXe DD2.4 ("Gekko")
Add a table entry for 750CXe DD2.4 ("Gekko") as found in the GameCube from
Nintendo:

  http://www-306.ibm.com/chips/techlib/techlib.nsf/techdocs/291C8D0EF3EAEC1687256B72005C745C#C1

Signed-off-by: Arthur Othieno <a.othieno@bluewin.ch>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:59 -07:00
Arthur Othieno ac1ff0477c [PATCH] ppc32: Re-order cputable for 750CXe DD2.4 entry
"745/755" (pvr_value:0x00083000) is a catch-all entry.
Since arch/ppc/kernel/misc.S:identify_cpu() returns on first match,
move this lower in the table so 750CXe DD2.4 (pvr_value:0x00083214)
may be correctly enumerated.

Signed-off-by: Arthur Othieno <a.othieno@bluewin.ch>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:59 -07:00
Kumar Gala 66d2cc95d1 [PATCH] ppc32: Added PCI support MPC83xx
Adds support for the two PCI busses on MPC83xx and the MPC834x SYS/PIBS
reference board.

The code initializes PCI inbound/outbound windows, allocates and registers
PCI memory/io space.  Be aware that setup of the PCI buses on the PIBs
board is expected to be done by the firmware.

Signed-off-by: Tony Li <tony.li@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:59 -07:00
Lee Nicks cc9c540b6c [PATCH] ppc32: defconfig for Marvell EV64360BP board
Here is the default configuration for Marvell EV64360BP board.  It has been
tested on the board.

Signed-off-by: Lee Nicks <allinux@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:59 -07:00
Lee Nicks 3acb23440f [PATCH] ppc32: add support for Marvell EV64360BP board
This patch adds support for Marvell EV64360BP board.  So far, it supports
mpsc serial console, gigabit ethernet, jffs2 root filesystem, etc.  Other
device support, like watchdog, RTC, will be added later.

Signed-off-by: Lee Nicks <allinux@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:59 -07:00
Kumar Gala 88adfe70c6 [PATCH] ppc32: ppc_sys system on chip identification additions
Add the ability to identify an SOC by a name and id.  There are cases in
which the integer identifier is not sufficient to specify a specific SOC.
In these cases we can use a string to further qualify the match.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:58 -07:00
Eugene Surovegin fa71f0e0f5 [PATCH] ppc32: disable IBM405_ERR77 and IBM405_ERR51 workarounds for 405EP
Disable IBM405_ERR77 and IBM405_ERR51 errata workarounds for 405EP.  This
chip has these problems fixed.

Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:58 -07:00
Eugene Surovegin cc50664420 [PATCH] ppc32: fix Bamboo and Luan build warnings
Fix STD_UART_OP definitions in Bamboo and Luan board ports which were
causing "initialization makes pointer from integer without a cast"
warnings.

Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:58 -07:00
Eugene Surovegin cce9d7e36f [PATCH] ppc32: fix EMAC Tx channel assignments for NPe405H
Fix PowerPC NPe405H EMAC Tx channel assignments.  EMAC unit in this chip
uses common for 4xx "two Tx / one Rx" configuration.

Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:58 -07:00
Roland Dreier 5a6a4d4320 [PATCH] ppc32: Don't sleep in flush_dcache_icache_page()
flush_dcache_icache_page() will be called on an instruction page fault.  We
can't sleep in the fault handler, so use kmap_atomic() instead of just
kmap() for the Book-E case.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Acked-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:57 -07:00
Matt Porter 656de7e469 [PATCH] ppc32: add cputable entry for 440SP Rev. A
Adds the appropriate cputable entry for PPC440SP so cache line sizes are
configured correctly.

Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:57 -07:00
Kumar Gala ac6295c289 [PATCH] ppc32: removed find_name.c
No one uses find_name.c and no one seems to care about either.  So I'm
removing it.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:57 -07:00
Eugene Surovegin 9149fb3b8e [PATCH] ppc32: add 440GX rev.F cputable entry
Add PowerPC 440GX rev.F cputable entry.

Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:57 -07:00
Kumar Gala 39cdc4bfb5 [PATCH] ppc32: Cleaned up global namespace of Book-E watchdog variables
Renamed global variables used to convey if the watchdog is enabled and
periodicity of the timer and moved the declarations into a header for these
variables

Signed-off-by: Matt McClintock <msm@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:57 -07:00
Kumar Gala 0d8ba1a979 [PATCH] cpm_uart: Fix 2nd serial port on MPC8560 ADS
The 2nd serial port on the MPC8560 ADS was not being configured correctly
and thus could not be used as a console.  Updated the defconfig for the
board to configure the proper SCC channel for the 2nd serial port.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:56 -07:00
Matt Porter 2698ebcb43 [PATCH] ppc32: add phy excluded features to ocp_func_emac_data
This patch adds a field to struct ocp_func_emac_data that allows
platform-specific unsupported PHY features to be passed in to the ibm_emac
ethernet driver.

This patch also adds some logic for the Bamboo eval board to populate this
field based on the dip switches on the board.  This is a workaround for the
improperly biased RJ-45 sockets on the Rev.  0 Bamboo.

Signed-off-by: Wade Farnsworth <wfarnsworth@mvista.com>
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:56 -07:00
Kumar Gala 8e8fff0975 [PATCH] ppc32: Add ppc_sys descriptions for PowerQUICC II devices
Added ppc_sys device and system definitions for PowerQUICC II devices.
This will allow drivers for PQ2 to be proper platform device drivers.
Which can be shared on PQ3 processors with the same peripherals.

Signed-off-by: Matt McClintock <msm@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:56 -07:00
Kumar Gala a2f40ccd29 [PATCH] ppc32: Added support for the Book-E style Watchdog Timer
PowerPC 40x and Book-E processors support a watchdog timer at the processor
core level.  The timer has implementation dependent timeout frequencies
that can be configured by software.

One the first Watchdog timeout we get a critical exception.  It is left to
board specific code to determine what should happen at this point.  If
nothing is done and another timeout period expires the processor may
attempt to reset the machine.

Command line parameters:
  wdt=0 : disable watchdog (default)
  wdt=1 : enable watchdog

  wdt_period=N : N sets the value of the Watchdog Timer Period.

  The Watchdog Timer Period meaning is implementation specific. Check
  User Manual for the processor for more details.

This patch is based off of work done by Takeharu Kato.

Signed-off-by: Matt McClintock <msm@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:56 -07:00
Matt Porter 886b9fa499 [PATCH] ppc32: Add usb support to IBM stb04xxx platforms
Support ochi-ppc-soc.c on IBM stb04xxx platforms

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:55 -07:00
Kumar Gala 617bf9a47f [PATCH] ppc32: Remove board support for PCORE
Support for the PCORE board is no longer maintained and thus being removed

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:55 -07:00
Kumar Gala f4ad35a34b [PATCH] ppc32: Remove board support for SPD823TS
Support for the SPD823TS board is no longer maintained and thus being removed

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:55 -07:00
Kumar Gala 8b1a97776d [PATCH] ppc32: Remove board support for SM850
Support for the SM850 board is no longer maintained and thus being removed

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:55 -07:00
Kumar Gala ea08dcfa54 [PATCH] ppc32: Remove board support for REDWOOD
Support for the REDWOOD board is no longer maintained and thus being removed

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:54 -07:00
Kumar Gala d2d34169cc [PATCH] ppc32: Remove board support for RAINIER
Support for the RAINIER board is no longer maintained and thus being removed

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:54 -07:00
Kumar Gala 37330c9146 [PATCH] ppc32: Remove board support for OAK
Support for the OAK board is no longer maintained and thus being removed

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:54 -07:00
Kumar Gala 6db789b6a3 [PATCH] ppc32: Remove board support for MENF1
Support for the MENF1 board is no longer maintained and thus being removed

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:54 -07:00
Kumar Gala 89d7f53030 [PATCH] ppc32: Remove board support for MCPN765
Support for the MCPN765 board is no longer maintained and thus being removed

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:54 -07:00
Kumar Gala ba9d1e2a3d [PATCH] ppc32: Remove board support for K2
Support for the K2 board is no longer maintained and thus being removed

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:53 -07:00
Kumar Gala 94cb20e951 [PATCH] ppc32: Remove defconfig for CEDAR
Support for the CEDAR board no longer exists, removing the defconfig for it

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:53 -07:00
Kumar Gala b8bc6cedb2 [PATCH] ppc32: Remove board support for BEECH
Support for the BEECH board is no longer maintained and thus being removed

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:53 -07:00
Kumar Gala f4f1269cb3 [PATCH] ppc32: Remove board support for ASH
Support for the ASH board is no longer maintained and thus being removed

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:53 -07:00
Kumar Gala a3800d8ffa [PATCH] ppc32: Remove board support for ADIR
Support for the ADIR board is no longer maintained and thus being removed

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:52 -07:00
Adrian Bunk 4b4dc82247 [PATCH] arch/ppc/kernel/ppc_ksyms.c: remove unused #define EXPORT_SYMTAB_STROPS
This #define is only used on sparc.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:52 -07:00
Kumar Gala 80ac2912f8 [PATCH] ppc: L2 cache prefetch fixes on 745x
We run into problems if we blindly enable L2 prefetching without
checking that the L2 cache is actually enabled.  Additionaly, if we
disable the L2 cache we need to ensure that we disable L2 prefetching.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-01 10:52:29 -07:00
Marcelo Tosatti 62c592edea [PATCH] ppc32 8xx: fix warnings in m8xx_setup.c
The following patch fixes two warnings in arch/ppc/syslib/m8xx_setup.c

Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-30 11:15:19 -07:00
Stephen Rothwell 45e2a6e4e5 [PATCH] Create include/asm-powerpc
The ppc and ppc64 trees are hopefully going to merge over time, so this
patch begins the process by creating a place for the merging of the
header files.

Create include/asm-powerpc (and move linkage.h into it from
asm-{ppc,ppc64} since we don't like empty directories).  Modify the
ppc and ppc64 Makefiles to cope.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30 13:32:04 +10:00
Linus Torvalds 40193713df Merge HEAD from master.kernel.org:/pub/scm/linux/kernel/git/paulus/ppc64-2.6 2005-08-29 17:11:29 -07:00
Steven Rostedt 69be8f1896 [PATCH] convert signal handling of NODEFER to act like other Unix boxes.
It has been reported that the way Linux handles NODEFER for signals is
not consistent with the way other Unix boxes handle it.  I've written a
program to test the behavior of how this flag affects signals and had
several reports from people who ran this on various Unix boxes,
confirming that Linux seems to be unique on the way this is handled.

The way NODEFER affects signals on other Unix boxes is as follows:

1) If NODEFER is set, other signals in sa_mask are still blocked.

2) If NODEFER is set and the signal is in sa_mask, then the signal is
still blocked. (Note: this is the behavior of all tested but Linux _and_
NetBSD 2.0 *).

The way NODEFER affects signals on Linux:

1) If NODEFER is set, other signals are _not_ blocked regardless of
sa_mask (Even NetBSD doesn't do this).

2) If NODEFER is set and the signal is in sa_mask, then the signal being
handled is not blocked.

The patch converts signal handling in all current Linux architectures to
the way most Unix boxes work.

Unix boxes that were tested:  DU4, AIX 5.2, Irix 6.5, NetBSD 2.0, SFU
3.5 on WinXP, AIX 5.3, Mac OSX, and of course Linux 2.6.13-rcX.

* NetBSD was the only other Unix to behave like Linux on point #2. The
main concern was brought up by point #1 which even NetBSD isn't like
Linux.  So with this patch, we leave NetBSD as the lonely one that
behaves differently here with #2.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-29 10:03:11 -07:00
David Gibson 2e2446ea07 [PATCH] Remove NACA fixed address constraint
Comments in head.S suggest that the iSeries naca has a fixed address,
because tools expect to find it there.  The only tool which appears to
access the naca is addRamDisk, but both the in-kernel version and the
version used in RHEL and SuSE in fact locate the NACA the same way as
the hypervisor does, by following the pointer in the hvReleaseData
structure.

Since the requirement for a fixed address seems to be obsolete, this
patch removes the naca from head.S and replaces it with a normal C
initializer.

For good measure, it removes an old version of addRamDisk.c which was
sitting, unused, in the ppc32 tree.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:33 +10:00
Marcelo Tosatti 566ecb9b25 [PATCH] ppc32 8xx: fix m8xx_ide_init() #ifdef
Be more precise on deciding whether to call m8xx_ide_init() at
m8xx_setup.c:platform_init().

Compilation fails if CONFIG_BLK_DEV_IDE is defined but
CONFIG_BLK_DEV_MPC8xx_IDE isnt.

Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-26 16:31:46 -07:00
Al Viro 6299afc40c [PATCH] Kconfig fix (CONFIG_PM on 44x)
CONFIG_PM is broken on 44x; removed duplicate entry for CONFIG_PM, made
the inclusion of generic one conditional on BROKEN || !44x.

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-23 18:43:43 -07:00
Al Viro f08243a491 [PATCH] Kconfig fix (ppc 4xx and early serial)
a bunch of ppc 4xx variants unconditionally calls early_serial_setup() and
therefore needs SERIAL_8250

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-23 18:43:43 -07:00
Al Viro c4457fb901 [PATCH] Kconfig fix (IRQ_ALL_CPUS vs. MV64360)
MV64360 does not support IRQ_ALL_CPUS - see arch/ppc/kernel/mv64360_pic.c.

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-23 18:43:42 -07:00
Al Viro ee449f514d [PATCH] Kconfig fix (ppc32 SMP dependencies)
ppc SMP is supported only for 6xx/POWER3/POWER4 - i.e. ones that have
PPC_STD_MMU.  Dependency fixed.

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-23 18:43:42 -07:00
Matt Porter 28cd1d1780 [PATCH] ppc32: fix ppc4xx stb03xxx dma build
Fixes build on 4xx stb03xxx when general purpose dma engine support is
enabled.

Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-18 12:53:58 -07:00
Kumar Gala 5e708484d7 [PATCH] ppc32: Fix MPC834x USB memory map offsets
The memory mappings for MPC8349 USB MPH and DR modules were reversed.

Signed-off-by: Li Yang <LeoLi@freescale.com>
Signed-off-by: Jiang Bo <Tanya.jiang@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-08 15:29:13 -07:00
Marcelo Tosatti 079da354db [PATCH] ppc32: 8xx commproc avoid direct pte manipulation, use dma coherent API instead
Touching the pte directly causes the 8Mbyte TLB entry to be invalidated.

This has been fixed in v2.4 for ages.

Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-07 10:00:39 -07:00
Aristeu Sergio Rozanski Filho 204085c52a [PATCH] ppc32: 8xx kill unused variable in commproc
8xx: commproc.c: kill unused variable

Signed-off-by: Aristeu Sergio Rozanski Filho <aris@cathedrallabs.org>
Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-07 10:00:39 -07:00
Aristeu Sergio Rozanski Filho ff085c1cc2 [PATCH] ppc32: 8xx restrict ENET_BIG_BUFFERS option
8xx: restrict ENET_BIG_BUFFERS option to drivers which actually use it

Signed-off-by: Aristeu Sergio Rozanski Filho <aris@cathedrallabs.org>
Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-07 10:00:39 -07:00
Aristeu Sergio Rozanski Filho b7f08aabb1 [PATCH] ppc32: 8xx fix CPM ethernet description
8xx: fix CPM Ethernet description

Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: Aristeu Sergio Rozanski Filho <aris@cathedrallabs.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-07 10:00:39 -07:00
Aristeu Sergio Rozanski Filho fbccb3d7f5 [PATCH] ppc32: 8xx: fec: fix interrupt handler prototypes
8xx: fec: fix interrupt handler prototypes

Signed-off-by: Aristeu Sergio Rozanski Filho <aris@conectiva.com.br>
Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-07 10:00:39 -07:00
Aristeu Sergio Rozanski Filho fc007ddd60 [PATCH] ppc32: 8xx: using dma_alloc_coherent() instead consistent_alloc()
8xx: using dma_alloc_coherent() instead consistent_alloc()

Signed-off-by: Aristeu Sergio Rozanski Filho <aris@conectiva.com.br>
Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-07 10:00:39 -07:00
Aristeu Sergio Rozanski Filho 8b0ed2fbdb [PATCH] ppc32: 8xx: convert fec driver to use work_struct
8xx: convert fec driver to use work_struct

Signed-off-by: Aristeu Sergio Rozanski Filho <aris@conectiva.com.br>
Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-07 10:00:38 -07:00
Linus Torvalds d8588ee5b8 ppc: Export __handle_mm_fault for MOL
When we did the handle_mm_fault cleanup and get_user_page() race fixes,
handle_mm_fault turned into an inline function that called the real
__handle_mm_fault() code.  The export needed for MOL on ppc wasn't
updated to match the new world order, though.

Turn it into a GPL export while at it, since this is all about internal
interfaces and MOL is GPL'd anwyay.
2005-08-06 09:44:37 -07:00
Dominik Brodowski 43c3473552 [PATCH] pci and yenta: pcibios_bus_to_resource
In yenta_socket, we default to using the resource setting of the CardBus
bridge.  However, this is a PCI-bus-centric view of resources and thus needs
to be converted to generic resources first.  Therefore, add a call to
pcibios_bus_to_resource() call in between.  This function is a mere wrapper on
x86 and friends, however on some others it already exists, is added in this
patch (alpha, arm, ppc, ppc64) or still needs to be provided (parisc -- where
is its pcibios_resource_to_bus() ?).

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-04 21:32:46 -07:00
Matt Porter 61d44c777a [PATCH] ppc32: add bamboo defconfig
Add Bamboo platform defconfig

Signed-off-by: Wade Farnsworth <wfarnsworth@mvista.com>
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-01 19:14:01 -07:00
Matt Porter 497799d368 [PATCH] ppc32: add bamboo platform
Add Bamboo platform support.  This is an AMCC 440EP-based reference platform.

Signed-off-by: Wade Farnsworth <wfarnsworth@mvista.com>
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-01 19:14:01 -07:00
Matt Porter c9cf73aee1 [PATCH] ppc32: add 440ep support
Add PPC440EP core support.  PPC440EP is a PPC440-based SoC with a classic PPC
FPU and another set of peripherals.

Signed-off-by: Wade Farnsworth <wfarnsworth@mvista.com>
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-01 19:14:01 -07:00
Kumar Gala e8be1c8e06 [PATCH] ppc32: Mark boards that don't build as BROKEN
Marked APUS and GEMINI as BROKEN since they do not build at the platform
level.  We have requested that the maintainers of these boards/platforms
fix them by the time 2.6.15 is released or we plan on concerning them
unmaintained and thus removing them.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-01 19:14:01 -07:00
Eugene Surovegin 5ce17b18e1 [PATCH] ppc32: fix 44x early serial debug for configurations with more than 512M of RAM
Fix 44x early serial debugging for big RAM configurations (more than 512M).
 We cannot use default OpenBIOS virtual mapping, because it interferes with
pinned TLB entry.

While we are at it, move early UART mapping to TLB slot 0, so it can
survive longer during boot process (slot 1 is used by the first ioremap
call, effectively killing UART mapping if it occupies this slot).  Also,
change UART TLB entry size to 4K (256M is too much for a bunch of registers
:).  Squash some warnings on the way.

Tested on Ebony and Ocotea with 1G of RAM.

Thanks to Scott Coulter <scott.coulter@cyclone.com> for diagnosing this
problem.

Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-30 10:14:46 -07:00
Robert Love 141d751e26 [PATCH] ppc32: inotify syscalls
Add inotify system call stubs to PPC32.

Signed-off-by: Robert Love <rml@novell.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-30 10:14:46 -07:00
Marcelo Tosatti 71b2c86f5f [PATCH] ppc32: 8xx remove BROKEN Kconfig entry
8xx is not BROKEN anymore.

Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:35:39 -07:00
Anton Wllert bf85fa6c87 [PATCH] ppc32: 8xx avoid icbi misbehaviour in __flush_dcache_icache_phys
On 8xx, in the case where a pagefault happens for a process who's not
the owner of the vma in question (ptrace for instance), the flush
operation is performed via the physical address.

Unfortunately, that results in a strange, unexplainable "icbi"
instruction fault, most likely due to a CPU bug (see oops below).

Avoid that by flushing the page via its kernel virtual address.

Oops: kernel access of bad area, sig: 11 [#2]
NIP: C000543C LR: C000B060 SP: C0F35DF0 REGS: c0f35d40 TRAP: 0300 Not tainted
MSR: 00009022 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 10
DAR: 00000010, DSISR: C2000000
TASK = c0ea8430[761] 'gdbserver' THREAD: c0f34000
Last syscall: 26
GPR00: 00009022 C0F35DF0 C0EA8430 00F59000 00000100 FFFFFFFF 00F58000
00000001
GPR08: C021DAEF C0270000 00009032 C0270000 22044024 10025428 01000800
00000001
GPR16: 007FFF3F 00000001 00000000 7FBC6AC0 00F61022 00000001 C0839300
C01E0000
GPR24: 00CD0889 C082F568 3000AC18 C02A7A00 C0EA15C8 00F588A9 C02ACB00
C02ACB00
NIP [c000543c] __flush_dcache_icache_phys+0x38/0x54
LR [c000b060] flush_dcache_icache_page+0x20/0x30
Call trace:
[c000b154] update_mmu_cache+0x7c/0xa4
[c005ae98] do_wp_page+0x460/0x5ec
[c005c8a0] handle_mm_fault+0x7cc/0x91c
[c005ccec] get_user_pages+0x2fc/0x65c
[c0027104] access_process_vm+0x9c/0x1d4
[c00076e0] sys_ptrace+0x240/0x4a4
[c0002bd0] ret_from_syscall+0x0/0x44

Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:34:34 -07:00
Olaf Hering 6fdfb38281 [PATCH] make a few functions static in pmac_setup.c
Making a few functions static saves a few bytes, but only on ppc32.

     text	   data	    bss	    dec	    hex	filename
  3752421	1605208	 345608	5703237	 570645	../O-ppc64_iSeries_defconfig/vmlinux
  3709411	2042552	 339992	6091955	 5cf4b3	../O-ppc64_maple_defconfig/vmlinux
  5397329	3054824	 679856	9132009	 8b57e9	../O-ppc64_pSeries_defconfig/vmlinux
 -3882695	 417552	 197760	4498007	 44a257	../O-ppc_common_defconfig/vmlinux
 -3414510	 574500	 241440	4230450	 408d32	../O-ppc_pmac_defconfig/vmlinux
 +3882627	 417168	 197760	4497555	 44a093	../O-ppc_common_defconfig/vmlinux
 +3414442	 575428	 241440	4231310	 40908e	../O-ppc_pmac_defconfig/vmlinux

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:25:57 -07:00
Kumar Gala c64d7b4cea [PATCH] ppc32: Fix building of TQM8260 board
Added missing include of cpm2.h in correct order to allow TQM8260 to build

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:25:56 -07:00
Eugene Surovegin 757569295d [PATCH] ppc32: fix 440SP MAL channels count
Fix the MAL channels count in PPC 440SP OCP definition.  PPC 440SP has only
1 EMAC attached to MAL.

Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:25:56 -07:00
Kumar Gala 15ce2982c6 [PATCH] ppc32: Fix building of radstone_ppc7d
Updated radstone_ppc7d_defconfig to include the ds1337 driver which is used
by the platform code.  This fixes the link error when building.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:25:56 -07:00
Kumar Gala 571e63fc83 [PATCH] ppc32: Fix building of prpmc750
Updated prpmc750 platform code to include serial_reg.h to fix building.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:25:56 -07:00
Kumar Gala 127384524b [PATCH] ppc32: Fix typo in setup of 2nd PCI bus on 85xx
Typo bug that was using PCI1 defines instead of PCI2 when setting up the
second PCI bus controller on 85xx based systems.  This hasn't been a real
issue since currently the PCI2 sizes are the same as the PCI1 sizes for
currently supported boards.

Thanks to Andrew Klossner @ Xerox for point this out.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:25:56 -07:00
Downing, Thomas c41b72d5bd [PATCH] ppc32: fix compilation error with CONFIG_PQ2FADS
The 2.6.12.3 kernel compilation fails for ARCH=ppc when CONFIG_PQ2FADS=y.
This patch has been tested on Freescale PQ2FADS-ZU and -VR boards.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:25:55 -07:00
Marcelo Tosatti 3a1ce8aa2d [PATCH] ppc32: 8xx: update DataTLBMiss exception comment
On PPC 8xx, the DataTLBMiss handler does not jump directly to the page
fault handler, as was the case in v2.4.

It instead loads an invalid TLB which causes a subsequent DataTLBError
exception.

The comment on top of it haven't been update to reflect the change, though.

Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:25:55 -07:00
Kumar Gala 13e886c3b4 [PATCH] ppc32: Make the UARTs on MPC824x individual platform devices
The UARTs on the MPC824x are unique devices and really shouldn't be thought
of as a DUART.  In addition, if both UARTs are in use we need to configure
the part to enable the 2nd UART since the pins for the UARTs are
multiplexed.  Adds support to run the 824x Sandpoint with both UARTs if
desired.

Signed-off-by: Matt McClintock <msm@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:25:55 -07:00
Kumar Gala d054b5acfe [PATCH] ppc32: Add proper prototype for cpm2_reset()
Added a proper prototype for cpm2_reset() which gets rid of a build
warning.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:25:55 -07:00
Olaf Hering 694e50db5d [PATCH] ppc32: update defconfigs
update pmac_defconfig

enable all relevant options in common_defconfig,
so it can serve as a compiletest for PPC_MULTIPLATFORM configuration

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:25:55 -07:00
Olaf Hering 7b625c001a [PATCH] ppc/ppc64: use Kconfig.hz
use new Kconfig.hz on ppc/ppc64, use also Kconfig.preempt for ppc

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:25:55 -07:00
Eric W. Biederman 59586e5a26 [PATCH] Don't export machine_restart, machine_halt, or machine_power_off.
machine_restart, machine_halt and machine_power_off are machine
specific hooks deep into the reboot logic, that modules
have no business messing with.  Usually code should be calling
kernel_restart, kernel_halt, kernel_power_off, or
emergency_restart. So don't export machine_restart,
machine_halt, and machine_power_off so we can catch buggy users.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-26 14:35:42 -07:00
Olaf Hering f13487c66c [PATCH] ppc32: make -j12 all fails in uImage target
make -j zImage may call if_changed twice at the same time, the result is a
corrupted vmlinux.gz

Write to a temporary file for the time being until someone with make skills
fix the serialization properly.

Signed-off-by: Olaf Hering <olh@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Tom Rini <trini@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-13 11:25:25 -07:00
Albert Herranz bc75a24582 [PATCH] kexec-ppc: fix for ksysfs crash_notes
The following patch prevents the crash dump helper code found within kexec
from breaking ppc which still lacks crash dump functionality.

ksysfs crash_notes attribute handling was left under CONFIG_KEXEC for
simplicity although it is not strictly kexec related.

We provide here a dummy definition for crash_notes on ppc.

Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-12 16:01:03 -07:00
Sam Ravnborg d5950b4355 [NET]: add a top-level Networking menu to *config
Create a new top-level menu named "Networking" thus moving
net related options and protocol selection way from the drivers
menu and up on the top-level where they belong.

To implement this all architectures has to source "net/Kconfig" before
drivers/*/Kconfig in their Kconfig file. This change has been
implemented for all architectures.

Device drivers for ordinary NIC's are still to be found
in the Device Drivers section, but Bluetooth, IrDA and ax25
are located with their corresponding menu entries under the new
networking menu item.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-11 21:03:49 -07:00
Bernard Blackham e00d9967e3 [PATCH] pm: fix u32 vs. pm_message_t confusion in cpufreq
Fix u32 vs pm_message_t confusion in cpufreq.

Signed-off-by: Bernard Blackham <bernard@blackham.com.au>
Signed-off-by: Pavel Machek <pavel@suse.cz>
Cc: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:43 -07:00
Jeff Mahoney 5e6557722e [PATCH] openfirmware: generate device table for userspace
This converts the usage of struct of_match to struct of_device_id,
similar to pci_device_id.  This allows a device table to be generated,
which can be parsed by depmod(8) to generate a map file for module
loading.

In order for hotplug to work with macio devices, patches to
module-init-tools and hotplug must be applied.  Those patches are
available at:

 ftp://ftp.suse.com/pub/people/jeffm/linux/macio-hotplug/

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-06 12:55:20 -07:00
Eugene Surovegin 4b1294f928 [PATCH] ppc32: explicitly disable 440GP IRQ compatibility mode in 440GX setup
Add explicit disabling of 440GP IRQ compatibility mode when configuring
440GX interrupt controller.  This helps when board firmware for some reason
uses this compatibility mode and leaves it enabled.  It breaks 440GX
interrupt code because it assumes native 440GX IRQ mode.  People seems to
be continuously bitten by this.

Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-05 19:18:59 -07:00
john stultz f326d22b8c [PATCH] ppc32: stop misusing NTP's time_offset value
As part of my timeofday rework, I've been looking at the NTP code and I
noticed that the PPC architecture is apparently misusing the NTP's
time_offset (it is a terrible name!) value as some form of timezone offset.

This could cause problems when time_offset changed by the NTP code.  This
patch changes the PPC code so it uses a more clear local variable:
timezone_offset.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Acked-by: Tom Rini <trini@kernel.crashing.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-05 19:18:59 -07:00
Andrei Konovalov e6b6239f8e [PATCH] ppc32: add Freescale MPC885ADS board support
This patch adds the Freescale MPC86xADS board support.  The supported
devices are SMC UART and 10Mbit ethernet on SCC1.

The manual for the board says that it "is compatible with the MPC8xxFADS
for software point of view".  That's why this patch extends FADS instead of
introducing a new platform.

FEC is not supported as the "combined FCC/FEC ethernet driver" driver by
Pantelis Antoniou should replace the current FEC driver.

Signed-off-by: Gennadiy Kurtsman <gkurtsman@ru.mvista.com>
Signed-off-by: Andrei Konovalov <akonovalov@ru.mvista.com>
Acked-by: Tom Rini <trini@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-05 19:18:59 -07:00
Kumar Gala bcbda35ca7 [PATCH] ppc32: Fix pointer check for MPC8540 ADS device
Editor snafu in which the call to ppc_sys_get_pdata got inside the if check
instead of before it.  Oops.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-30 08:45:09 -07:00
Olaf Hering ee93b43a05 [PATCH] ppc32: use correct register names in arch/ppc/kernel/relocate_kernel.S
CONFIG_KEXEC=y doesnt work:

arch/ppc/kernel/relocate_kernel.S:37: Error: unsupported relocation against SRR1
arch/ppc/kernel/relocate_kernel.S:39: Error: unsupported relocation against SRR0

Signed-off-by: Olaf Hering <olh@suse.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-30 08:45:09 -07:00
Greg KH 8644d2a42b Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2005-06-27 22:07:56 -07:00
Michael Ellerman 2311b1f2bb [PATCH] PCI: fix-pci-mmap-on-ppc-and-ppc64.patch
This is an updated version of Ben's fix-pci-mmap-on-ppc-and-ppc64.patch
which is in 2.6.12-rc4-mm1.

It fixes the patch to work on PPC iSeries, removes some debug printks
at Ben's request, and incorporates your
fix-pci-mmap-on-ppc-and-ppc64-fix.patch also.

Originally from Benjamin Herrenschmidt <benh@kernel.crashing.org>

This patch was discussed at length on linux-pci and so far, the last
iteration of it didn't raise any comment.  It's effect is a nop on
architecture that don't define the new pci_resource_to_user() callback
anyway.  It allows architecture like ppc who put weird things inside of
PCI resource structures to convert to some different value for user
visible ones.  It also fixes mmap'ing of IO space on those archs.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 21:52:45 -07:00
Benjamin Herrenschmidt 8c8709334c [PATCH] ppc32: Remove CONFIG_PMAC_PBOOK
This patch removes CONFIG_PMAC_PBOOK (PowerBook support).  This is now
split into CONFIG_PMAC_MEDIABAY for the actual hotswap bay that some
powerbooks have, CONFIG_PM for power management related code, and just left
out of any CONFIG_* option for some generally useful stuff that can be used
on non-laptops as well.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 15:11:43 -07:00
Benjamin Herrenschmidt e4ee69c8c1 [PATCH] ppc32: Bump PMU interrupt priority
The Power Management Unit on PowerMacs is very sensitive to timeouts during
async message exchanges.  It uses rather crude protocol based on a shift
register with an interrupt and is almost continuously exchanging messages with
the host CPU on laptops.

This patch adds a routine to the open_pic driver to be able to select a PMU
driver so that it bumps it's interrupt priority to above the normal level.

This will allow PMU interrupts to occur while another interrupt is pending,
and thus reduce the risk of machine beeing abruptly shutdown by the PMU due to
a timeout in PMU communication caused by excessive interrupt latency.  The
problem is very rare, and usually just doesn't happen, but it is still useful
to make things even more robust.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 15:11:42 -07:00
Marcelo Tosatti bb16574681 [PATCH] 8xx: avoid "dcbst" misbehaviour with unpopulated TLB
The proposed _tlbie call at update_mmu_cache() is safe because:

Addresses for which update_mmu_cache() gets invocated are never inside the
static kernel virtual mapping, meaning that there is no risk for the
_tlbie() here to be thrashing the pinned entry, as Dan suspected.

The intermediate TLB state in which this bug can be triggered is not
visible by userspace or any other contexts, except the page fault handling
path.  So there is no need to worry about userspace dcbxxx users.

The other solution to this is to avoid dcbst misbehaviour in the first
place, which involves changing in-kernel "dcbst" callers to use 8xx
specific SPR's.

Summary:

On 8xx, cache control instructions (particularly "dcbst" from
flush_dcache_icache) fault as write operation if there is an unpopulated
TLB entry for the address in question.  To workaround that, we invalidate
the TLB here, thus avoiding dcbst misbehaviour.

Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 15:11:42 -07:00
Kumar Gala 9c4142a133 [PATCH] ppc32: Fix compiling of sandpoint platform
Lost a curly brace in translation.  Everything is better now.

Signed-off-by: Matt McClintock <msm@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 15:11:41 -07:00
Jens Axboe 22e2c507c3 [PATCH] Update cfq io scheduler to time sliced design
This updates the CFQ io scheduler to the new time sliced design (cfq
v3).  It provides full process fairness, while giving excellent
aggregate system throughput even for many competing processes.  It
supports io priorities, either inherited from the cpu nice value or set
directly with the ioprio_get/set syscalls.  The latter closely mimic
set/getpriority.

This import is based on my latest from -mm.

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 14:33:29 -07:00
Kumar Gala 7d681b23d6 [PATCH] ppc32: Fix MPC83xx IPIC external interrupt pending register offset
The pending registers for IRQ1-IRQ7 were pointing to the interrupt pending
register instead of the external one.

Signed-off-by: Tony Li <Tony.Li@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-26 08:43:19 -07:00
Linus Torvalds 2031d0f586 Merge Christoph's freeze cleanup patch 2005-06-25 17:16:53 -07:00
Christoph Lameter 3e1d1d28d9 [PATCH] Cleanup patch for process freezing
1. Establish a simple API for process freezing defined in linux/include/sched.h:

   frozen(process)		Check for frozen process
   freezing(process)		Check if a process is being frozen
   freeze(process)		Tell a process to freeze (go to refrigerator)
   thaw_process(process)	Restart process
   frozen_process(process)	Process is frozen now

2. Remove all references to PF_FREEZE and PF_FROZEN from all
   kernel sources except sched.h

3. Fix numerous locations where try_to_freeze is manually done by a driver

4. Remove the argument that is no longer necessary from two function calls.

5. Some whitespace cleanup

6. Clear potential race in refrigerator (provides an open window of PF_FREEZE
   cleared before setting PF_FROZEN, recalc_sigpending does not check
   PF_FROZEN).

This patch does not address the problem of freeze_processes() violating the rule
that a task may only modify its own flags by setting PF_FREEZE. This is not clean
in an SMP environment. freeze(process) is therefore not SMP safe!

Signed-off-by: Christoph Lameter <christoph@lameter.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 17:10:13 -07:00
Olaf Hering f14c6fd0fc [PATCH] update comment about gzip scratch size
fix a comment about the array size.

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:25:07 -07:00
Maneesh Soni 72414d3f1d [PATCH] kexec code cleanup
o Following patch provides purely cosmetic changes and corrects CodingStyle
  guide lines related certain issues like below in kexec related files

  o braces for one line "if" statements, "for" loops,
  o more than 80 column wide lines,
  o No space after "while", "for" and "switch" key words

o Changes:
  o take-2: Removed the extra tab before "case" key words.
  o take-3: Put operator at the end of line and space before "*/"

Signed-off-by: Maneesh Soni <maneesh@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:55 -07:00
Alexander Nyberg 6e274d1443 [PATCH] kdump: Use real pt_regs from exception
Makes kexec_crashdump() take a pt_regs * as an argument.  This allows to
get exact register state at the point of the crash.  If we come from direct
panic assertion NULL will be passed and the current registers saved before
crashdump.

This hooks into two places:
die(): check the conditions under which we will panic when calling
do_exit and go there directly with the pt_regs that caused the fatal
fault.

die_nmi(): If we receive an NMI lockup while in the kernel use the
pt_regs and go directly to crash_kexec(). We're probably nested up badly
at this point so this might be the only chance to escape with proper
information.

Signed-off-by: Alexander Nyberg <alexn@telia.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:54 -07:00
Eric W. Biederman 70765aa4bd [PATCH] kexec: kexec ppc support
I have tweaked this patch slightly to handle an empty list
of pages to relocate passed to relocate_new_kernel.  And
I have added ppc_md.machine_crash_shutdown.  To keep up with
the changes in the generic kexec infrastructure.

From: Albert Herranz <albert_herranz@yahoo.es>

The following patch adds support for kexec on the ppc32 platform.

Non-OpenFirmware based platforms are likely to work directly without
additional changes on the kernel side.  The kexec-tools userland package
may need to be slightly updated, though.

For OpenFirmware based machines, additional work is still needed on the
kernel side before kexec support is ready.  Benjamin Herrenschmidt is
kindly working on that part.

In order for a ppc platform to use the kexec kernel services it must
implement some ppc_md hooks.  Otherwise, kexec will be explicitly disabled,
as suggested by benh.

There are 3+1 new ppc_md hooks that a platform supporting kexec may
implement.  Two of them are mandatory for kexec to work.  See
include/asm-ppc/machdep.h for details.

- machine_kexec_prepare(image)

  This function is called to make any arrangements to the image before it
  is loaded.

  This hook _MUST_ be provided by a platform in order to activate kexec
  support for that platform.  Otherwise, the platform is considered to not
  support kexec and the kexec_load system call will fail (that makes all
  existing platforms by default non-kexec'able).

- machine_kexec_cleanup(image)

  This function is called to make any cleanups on image after the loaded
  image data it is freed.  This hook is optional.  A platform may or may
  not provide this hook.

- machine_kexec(image)

  This function is called to perform the _actual_ kexec.  This hook
  _MUST_ be provided by a platform in order to activate kexec support for
  that platform.

  If a platform provides machine_kexec_prepare but forgets to provide
  machine_kexec, a kexec will fall back to a reboot.

  A ready-to-use machine_kexec_simple() generic function is provided to,
  hopefully, simplify kexec adoption for embedded platforms.  A platform
  may call this function from its specific machine_kexec hook, like this:

void myplatform_kexec(struct kimage *image)
{
        machine_kexec_simple(image);
}

- machine_shutdown()

  This function is called to perform any machine specific shutdowns, not
  already done by drivers.  This hook is optional.  A platform may or may
  not provide this hook.

An example (trimmed) platform specific module for a platform supporting
kexec through the existing machine_kexec_simple follows:

/* ... */

#ifdef CONFIG_KEXEC
int myplatform_kexec_prepare(struct kimage *image)
{
        /* here, we can place additional preparations
*/
        return 0; /* yes, we support kexec */
}

void myplatform_kexec(struct kimage *image)
{
        machine_kexec_simple(image);
}
#endif /* CONFIG_KEXEC */

/* ... */

void __init
platform_init(unsigned long r3, unsigned long r4,
unsigned long r5,
              unsigned long r6, unsigned long r7)
{

/* ... */

#ifdef CONFIG_KEXEC
        ppc_md.machine_kexec_prepare =
myplatform_kexec_prepare;
        ppc_md.machine_kexec         =
myplatform_kexec;
#endif /* CONFIG_KEXEC */

/* ... */

}

The kexec ppc kernel support has been heavily tested on the GameCube Linux
port, and, as reported in the fastboot mailing list, it has been tested too
on a Moto 82xx ppc by Rick Richardson.

Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
Signed-off-by: Eric Biederman <ebiederm@xmission.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:51 -07:00
Kumar Gala 2ec19faf61 [PATCH] ppc32: remove some unnecessary includes of bootmem.h
Continue the Good Fight:  Limit bootmem.h include creep.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:27 -07:00
Kumar Gala 3d9077afea [PATCH] ppc32: Remove FSL OCP support
Support for the OCP device model on Freescale (FSL) PPC's is no longer used.
All FSL PPC's that were using OCP have be converted to using the platform
device model.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:27 -07:00
Kumar Gala 33d9e9b56d [PATCH] ppc32: Add support for Freescale e200 (Book-E) core
The e200 core is a Book-E core (similar to e500) that has a unified L1 cache
and is not cache coherent on the bus.  The e200 core also adds a separate
exception level for debug exceptions.  Part of this patch helps to cleanup a
few cases that are true for all Freescale Book-E parts, not just e500.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:26 -07:00
Kumar Gala 62aa751d16 [PATCH] ppc32: Check return of ppc_sys_get_pdata before accessing pointer
Ensure that the returned pointer from ppc_sys_get_pdata is not NULL before we
start using it.  This handles any cases where we have variants of processors
on the same board with different functionality.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:26 -07:00
Christoph Hellwig 9a59f452ab [PATCH] remove <linux/xattr_acl.h>
This file duplicates <linux/posix_acl_xattr.h>, using slightly different
names.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:33 -07:00
Dave Hansen 3f22ab276b [PATCH] make each arch use mm/Kconfig
For all architectures, this just means that you'll see a "Memory Model"
choice in your architecture menu.  For those that implement DISCONTIGMEM,
you may eventually want to make your ARCH_DISCONTIGMEM_ENABLE a "def_bool
y" and make your users select DISCONTIGMEM right out of the new choice
menu.  The only disadvantage might be if you have some specific things that
you need in your help option to explain something about DISCONTIGMEM.

Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:02 -07:00
Kumar Gala f1b04770b0 [PATCH] ppc32: Fix building MPC8555 CDS
Adding support for MPC8548 w/o PCI support, broke building MPC8555 CDS
by trying to remove a loop variable that was used when PCI is enabled.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org)
2005-06-22 13:23:38 -07:00
Randy Vinson bdca3f0aed [PATCH] I2C: Add support for Maxim/Dallas DS1374 Real-Time Clock Chip (2/2)
This change provides support for the DS1374 Real-Time Clock chip present
on the MPC8349ADS board. It depends on a previous patch which adds I2C
support for the DS1374.

Signed-off-by: Randy Vinson <rvinson@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-21 21:52:06 -07:00
Benjamin Herrenschmidt 6879dc137e [PATCH] ppc32: Kill embedded system.map, use kallsyms
This patch kills the whole embedded System.map mecanism and the
bootloader-passed System.map that was used to provide symbol resolution in
xmon.  Instead, xmon now uses kallsyms like ppc64 does.

No hurry getting that in Linus tree, let it be tested in -mm for a while
first and make sure it doesn't break various embedded configs.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:26 -07:00
Jakub Bogusz a70d439345 [PATCH] ppc32: don't recursively crash in die() on CHRP/PReP machines
This patch avoids recursive crash (leading to kernel stack overflow) in
die() on CHRP/PReP machines when CONFIG_PMAC_BACKLIGHT=y.  set_backlight_*
functions are placed in pmac section, which is discarded when _machine !=
_MACH_Pmac.

Signed-off-by: Jakub Bogusz <qboosh@pld-linux.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:25 -07:00
Kumar Gala ba8c6d534a [PATCH] ppc32: remove some unnecessary includes of prom.h
Fight the Good Fight: Limit prom.h header creep.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:25 -07:00
Kumar Gala 1492ec8069 [PATCH] ppc32: Factor out common exception code into macro's for 4xx/Book-E
4xx and Book-E PPC's have several exception levels.  The code to handle
each level is fairly regular.  Turning the code into macro's will ease the
handling of future exception levels (debug) in forth coming chips.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:25 -07:00
Kumar Gala 5be061eee9 [PATCH] ppc32: Clean up NUM_TLBCAMS usage for Freescale Book-E PPC's
Made the number of TLB CAM entries private and converted the board
consumers to use num_tlbcam_entries which is setup at boot time from
configuration registers.  This way the only consumers of the #define
NUM_TLBCAMS are the arrays used to manage the TLB.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:24 -07:00
Kumar Gala 65145e060b [PATCH] ppc32: Added support for all MPC8548 internal interrupts
The MPC8548 has 48 internal interrupts and 12 external interrupts.  The
previous generation PowerQUICC III devices only had 32 internal and 12
external interrupts on the primary interrupt controller.

Expanded the number of internal interrupts to 48 for all PowerQUICC III
processors and moved the interrupt numbers for the external after the 48
internal interrupt lines, rather than putting the 12 new internal
interrupts at the end and ifdef'ng the whole mess.  As parted of this
created a macro which represents the internal interrupt senses since they
are the same on all PQ3 processors.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:24 -07:00
Matt Porter eee4146ab9 [PATCH] ppc32: remove orphaned ppc4xx_kgdb.c
Removes ppc4xx_kgdb.c which is no longer being used.  Pointed out by Andrei
Konovalov.

Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:24 -07:00
Kumar Gala 682afbbd14 [PATCH] ppc32: Add support for MPC8245 8250 serial ports on Sandpoint
Added platform device initialization for the two 8250 style UARTs that
exist on the MPC8245.  Additionally, updated the Sandpoint code to enable
one of these UARTs if an MPC8245 is connected to it.

Signed-off-by: Matt McClintock <msm@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:24 -07:00
Matt Porter 1e5aa8c865 [PATCH] ppc32: fix CONFIG_TASK_SIZE handling on 40x
This patch is virtually identical to my previous 44x one.  It removes
0x8000'0000 TASK_SIZE hardcoded assumption from head_4xx.S.

Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:24 -07:00
Kumar Gala b264c35279 [PATCH] ppc32: Converted MPC10X bridge to use platform devices instead of OCP
Converted the MPC10x bridge support (used by MPC10x and 8240/1/5) to used
the standard platform device model.

Signed-off-by: Matt McClintock <msm@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:23 -07:00
Kumar Gala c93fcff695 [PATCH] ppc32: Removed dependency on CONFIG_CPM2 for building mpc85xx_device.c
Previously we needed CONFIG_CPM2 enabled to get the proper IRQ ifdef's for
CPM interrupts.  Recent changes have caused that to be no longer necessary.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:23 -07:00
Kumar Gala c91999bba3 [PATCH] ppc32: Added preliminary support for the MPC8548 CDS board
Adds support for using the MPC8548 processor on the CDS reference board.
Currently all the major busses (PCI, PCI-X, PCI-Express, sRIO) and eTSEC3
and eTSEC4 are not supported.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:23 -07:00
Kumar Gala 5b37b700f7 [PATCH] ppc32: Added support for new MPC8548 family of PowerQUICC III processors
Added descriptions of the new MPC8548 family processors, e500 core and
peripherals.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:23 -07:00
Badari Pulavarty cbe37d0937 [PATCH] mm: remove PG_highmem
Remove PG_highmem, to save a page flag.  Use is_highmem() instead.  It'll
generate a little more code, but we don't use PageHigheMem() in many places.

Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:17 -07:00
Ingo Molnar 39c715b717 [PATCH] smp_processor_id() cleanup
This patch implements a number of smp_processor_id() cleanup ideas that
Arjan van de Ven and I came up with.

The previous __smp_processor_id/_smp_processor_id/smp_processor_id API
spaghetti was hard to follow both on the implementational and on the
usage side.

Some of the complexity arose from picking wrong names, some of the
complexity comes from the fact that not all architectures defined
__smp_processor_id.

In the new code, there are two externally visible symbols:

 - smp_processor_id(): debug variant.

 - raw_smp_processor_id(): nondebug variant. Replaces all existing
   uses of _smp_processor_id() and __smp_processor_id(). Defined
   by every SMP architecture in include/asm-*/smp.h.

There is one new internal symbol, dependent on DEBUG_PREEMPT:

 - debug_smp_processor_id(): internal debug variant, mapped to
                             smp_processor_id().

Also, i moved debug_smp_processor_id() from lib/kernel_lock.c into a new
lib/smp_processor_id.c file.  All related comments got updated and/or
clarified.

I have build/boot tested the following 8 .config combinations on x86:

 {SMP,UP} x {PREEMPT,!PREEMPT} x {DEBUG_PREEMPT,!DEBUG_PREEMPT}

I have also build/boot tested x64 on UP/PREEMPT/DEBUG_PREEMPT.  (Other
architectures are untested, but should work just fine.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:13 -07:00
Yani Ioannou ff381d2223 [PATCH] Driver Core: arch: update device attribute callbacks
Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:32 -07:00