This patch makes a number of changes with respect to the error-handling
code:
* Remove cleanup calls for the devm functions in both the error handling
code and the remove function. This cleanup is done automatically.
* The previous change simplifies the cleanup code at the end of the
function such that there is nothing to do on the failure of the call to
devm_ioremap. So it is changed to just return directly.
* There is no need for the ifs in the cleanup code at the end of the
function, because in each case the cleanup needed is statically
known. Drop the ifs, add new err labels, and drop the initializations of
the tested variables to NULL.
* Change the call to request_irq to a call to devm_request_irq, so that it
is cleaned up on exit.
* Cause the return value of devm_request_irq to go into the returned
variable rv rather than the unused variable ret. Drop ret.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Some platforms need to make use of the AHCI_HFLAG_DELAY_ENGINE flag.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Cc: stable@kernel.org
We will need this macro in both ahci.c and ahci_platform.c, so just move it
to the header.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Cc: stable@kernel.org
The following commit was intended to fix problems with specific AHCI
controller(s) that would become bricks if the AHCI specification was not
followed strictly (that is, if ahci_start_engine() was called while the
controller was in the wrong state):
commit 7faa33da9b
ahci: start engine only during soft/hard resets
However, some devices currently have issues with that fix, so we must
implement a flag that delays the ahci_start_engine() call only for specific
controllers.
This commit simply introduces the flag, without enabling it in any driver.
Note that even when AHCI_HFLAG_DELAY_ENGINE is not enabled, this patch does
not constitue a full revert to commit 7faa33da; there is still a change in
behavior to the ahci_port_suspend() failure path.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Cc: stable@kernel.org
Adds support for interrupt coalescing feature to reduce interrupt events.
Provides a mechanism of adjusting coalescing count and timeout tick by sysfs
at runtime, so that tradeoff of latency and CPU load can be made depending
on different applications.
Signed-off-by: Qiang Liu <qiang.liu@freescale.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
This patch adds in Hibernation related callbacks. Also we don't really need to
free DMA channel on suspend.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
According to the HT6560H datasheet, the recovery timing field is 4-bit wide,
with a value of 0 meaning 16 cycles. Correct obvious thinko in the recovery
field mask.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
This patch adds the IDE-mode SATA DeviceIDs for the Intel Lynx Point PCH.
Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
This patch adds the AHCI-mode SATA DeviceIDs for the Intel Lynx Point PCH.
Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Pull x86 platfrm driver fixes from Matthew Garrett:
"Some trivial patches that fix wifi on some Lenovos and avoid a
potential memory corruption issue on some Panasonics, plus two
straightforward new drivers that touch no existing code."
* 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86:
panasonic-laptop: avoid overflow in acpi_pcc_hotkey_add()
acer-wmi: No wifi rfkill on Lenovo machines
Fujitsu tablet extras driver
x86: Add amilo-rfkill driver for some Fujitsu-Siemens Amilo laptops
Pull PCI changes from Jesse Barnes:
"A single fix for a regression that affects some people who try to
disable ASPM for whatever reason."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci:
PCI: ignore pre-1.1 ASPM quirking when ASPM is disabled
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iEYEABECAAYFAk9dltgACgkQGkmNcg7/o7joMQCgnQlwX1MKLNvKtvxvzz7biF48
aigAoLELf2MGKHFs/yMilS/NMZTJR3Pd
=ttKa
-----END PGP SIGNATURE-----
Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-sh
Pull SuperH fixes from Paul Mundt.
* tag 'sh-for-linus' of git://github.com/pmundt/linux-sh:
sh-sci / PM: Avoid deadlocking runtime PM
sh: fix up the ubc clock definition for sh7785.
sh: add parameter for RSPI in clock-sh7757
sh: Fix sh2a vbr table for more than 255 irqs
num_sifr could go negative since acpi_pcc_get_sqty() returns -EINVAL
on error. Then it could bypass the sanity check (num_sifr > 255).
The subsequent call to kzalloc() would allocate a small buffer, leading
to a memory corruption.
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
We have several reports which says acer-wmi is loaded on ideapads
and register rfkill for wifi which can not be unblocked.
Since ideapad-laptop also register rfkill for wifi and it works
reliably, it will be fine acer-wmi is not going to register rfkill
for wifi once VPC2004 is found.
Also put IBM0068/LEN0068 in the list. Though thinkpad_acpi has no
wifi rfkill capability, there are reports which says acer-wmi also
block wireless on Thinkpad E520/E420.
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This patch adds support for some of the devices within a wide variety
of Fujitsu Tablet Computers, both convertibles and slates. Primarily
it allows for the automatic detection of the tablet/notebook mode for
convertible tablet pc's, and orientation for docked slates. It also
adds support for the application panel buttons usually found next to
the tablet screen, and docking station detection for slates.
Signed-off-by: Robert Gerlach <khnz@gmx.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
An rfkill driver based on the fsaa1655g and fsam7440 drivers for
Fujitsu-Siemens Amilo A1655 and M7440 models found at:
http://sourceforge.net/projects/fsaa1655g/http://sourceforge.net/projects/fsam7440/
This adds DMI matching, replaces the procfs files with rfkill devices,
and uses the proper functions to write to the i8042 safely.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Current code has put_ioctx() called asynchronously from aio_fput_routine();
that's done *after* we have killed the request that used to pin ioctx,
so there's nothing to stop io_destroy() waiting in wait_for_all_aios()
from progressing. As the result, we can end up with async call of
put_ioctx() being the last one and possibly happening during exit_mmap()
or elf_core_dump(), neither of which expects stray munmap() being done
to them...
We do need to prevent _freeing_ ioctx until aio_fput_routine() is done
with that, but that's all we care about - neither io_destroy() nor
exit_aio() will progress past wait_for_all_aios() until aio_fput_routine()
does really_put_req(), so the ioctx teardown won't be done until then
and we don't care about the contents of ioctx past that point.
Since actual freeing of these suckers is RCU-delayed, we don't need to
bump ioctx refcount when request goes into list for async removal.
All we need is rcu_read_lock held just over the ->ctx_lock-protected
area in aio_fput_routine().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Benjamin LaHaise <bcrl@kvack.org>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Have ioctx_alloc() return an extra reference, so that caller would drop it
on success and not bother with re-grabbing it on failure exit. The current
code is obviously broken - io_destroy() from another thread that managed
to guess the address io_setup() would've returned would free ioctx right
under us; gets especially interesting if aio_context_t * we pass to
io_setup() points to PROT_READ mapping, so put_user() fails and we end
up doing io_destroy() on kioctx another thread has just got freed...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Benjamin LaHaise <bcrl@kvack.org>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull btrfs updates from Chris Mason:
"I have two additional and btrfs fixes in my for-linus branch. One is
a casting error that leads to memory corruption on i386 during scrub,
and the other fixes a corner case in the backref walking code (also
triggered by scrub)."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix casting error in scrub reada code
btrfs: fix locking issues in find_parent_nodes()
Respectfully revert commit e6ca7b89dc "memcg: fix mapcount check
in move charge code for anonymous page" for the 3.3 release, so that
it behaves exactly like releases 2.6.35 through 3.2 in this respect.
Horiguchi-san's commit is correct in itself, 1 makes much more sense
than 2 in that check; but it does not go far enough - swapcount
should be considered too - if we really want such a check at all.
We appear to have reached agreement now, and expect that 3.4 will
remove the mapcount check, but had better not make 3.3 different.
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit f0fbf0abc0 ("x86: integrate delay functions") converted
delay_tsc() into a random delay generator for 64 bit. The reason is
that it merged the mostly identical versions of delay_32.c and
delay_64.c. Though the subtle difference of the result was:
static void delay_tsc(unsigned long loops)
{
- unsigned bclock, now;
+ unsigned long bclock, now;
Now the function uses rdtscl() which returns the lower 32bit of the
TSC. On 32bit that's not problematic as unsigned long is 32bit. On 64
bit this fails when the lower 32bit are close to wrap around when
bclock is read, because the following check
if ((now - bclock) >= loops)
break;
evaluated to true on 64bit for e.g. bclock = 0xffffffff and now = 0
because the unsigned long (now - bclock) of these values results in
0xffffffff00000001 which is definitely larger than the loops
value. That explains Tvortkos observation:
"Because I am seeing udelay(500) (_occasionally_) being short, and
that by delaying for some duration between 0us (yep) and 491us."
Make those variables explicitely u32 again, so this works for both 32
and 64 bit.
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org # >= 2.6.27
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nothing exciting here: just a few regression fixes for HD-audio and ASoC,
also the support of missing 32bit compat ioctl for HDSPM.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.18 (GNU/Linux)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=aCRY
-----END PGP SIGNATURE-----
Merge tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Nothing exciting here: just a few regression fixes for HD-audio and
ASoC, also the support of missing 32bit compat ioctl for HDSPM."
* tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hdspm - Provide ioctl_compat
ALSA: hda/realtek - Apply the coef-setup only to ALC269VB
ALSA: hda - add quirk to detect CD input on Gigabyte EP45-DS3
ASoC: neo1973: fix neo1973 wm8753 initialization
The msm git tree moved to
git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Two fixes are queued up. The first is an additional fix for the OMAP
initialization order issue and the second patch fixes a possible section
mismatch which can lead to a kernel crash in the AMD IOMMU driver when
suspend/resume is used and the compiler has not inlined the
iommu_set_device_table function.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=PZDd
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v3.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull two IOMMU fixes from Joerg Roedel:
"The first is an additional fix for the OMAP initialization order issue
and the second patch fixes a possible section mismatch which can lead
to a kernel crash in the AMD IOMMU driver when suspend/resume is used
and the compiler has not inlined the iommu_set_device_table function."
* tag 'iommu-fixes-v3.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
x86/amd: iommu_set_device_table() must not be __init
ARM: OMAP: fix iommu, not mailbox
Pull radeon drm stuff from Dave Airlie:
"Just some radeon fixes, one is for an oops where we run out of ioremap
space on some big hardware systems in 32-bit mode, stuff doesn't work
properly but at least the machine will boot.
One regression fix, and two bugs, one hw, one blit code."
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon/kms: fix hdmi duallink checks
drm/radeon/kms: set SX_MISC in the r6xx blit code (v2)
drm/radeon: deal with errors from framebuffer init path.
drm/radeon: fix a semaphore deadlock on pre cayman asics
Pull networking from David Miller:
1) IPV4 routing metrics can become stale when routes are changed by the
administrator, fix from Steffen Klassert.
2) atl1c does "val |= XXX;" where XXX is a bit number not a bit mask,
fix by using set_bit. From Dan Carpenter.
3) Memory accounting bug in carl9170 driver results in wedged TX queue.
Fix from Nicolas Cavallari.
4) iwlwifi accidently uses "sizeof(ptr)" instead of "sizeof(*ptr)", fix
from Johannes Berg.
5) Openvswitch doesn't honor dp_ifindex when doing vport lookups, fix
from Ben Pfaff.
6) ehea conversion to 64-bit stats lost multicast and rx_errors
accounting, fix from Eric Dumazet.
7) Bridge state transition logging in br_stp_disable_port() is busted,
it's emitted at the wrong time and the message is in the wrong tense,
fix from Paulius Zaleckas.
8) mlx4 device erroneously invokes the queue resize firmware operation
twice, fix from Jack Morgenstein.
9) Fix deadlock in usbnet, need to drop lock when invoking usb_unlink_urb()
otherwise we recurse into taking it again. Fix from Sebastian Siewior.
10) hyperv network driver uses the wrong driver name string, fix from
Haiyang Zhang.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
net/hyperv: Use the built-in macro KBUILD_MODNAME for this driver
net/usbnet: avoid recursive locking in usbnet_stop()
route: Remove redirect_genid
inetpeer: Invalidate the inetpeer tree along with the routing cache
mlx4_core: fix bug in modify_cq wrapper for resize flow.
atl1c: set ATL1C_WORK_EVENT_RESET bit correctly
bridge: fix state reporting when port is disabled
bridge: br_log_state() s/entering/entered/
ehea: restore multicast and rx_errors fields
openvswitch: Fix checksum update for actions on UDP packets.
openvswitch: Honor dp_ifindex, when specified, for vport lookup by name.
iwlwifi: fix wowlan suspend
mwifiex: reset encryption mode flag before association
carl9170: fix frame delivery if sta is in powersave mode
carl9170: Fix memory accounting when sta is in power-save mode.
The runtime PM of sh-sci devices is enabled when sci_probe() returns,
so the pm_runtime_put_sync() executed by driver_probe_device()
attempts to suspend the device. Then, in some situations, a
diagnostic message is printed to the console by one of the runtime
suspend routines handling the sh-sci device, which causes synchronous
runtime resume to be started from the device's own runtime suspend
callback. This causes rpm_resume() to be run eventually, which sees
the RPM_SUSPENDING status set by rpm_suspend() and waits for it to
change. However, the device's runtime PM status cannot change at
that point, because the routine that has set it waits for the
rpm_suspend() to return. A deadlock occurs as a result.
To avoid that make sci_init_single() increment the device's
runtime PM usage counter, so that it cannot be suspended by
driver_probe_device(). That counter has to be decremented
eventually, so make sci_startup() do that before starting to
actually use the device and make sci_shutdown() increment it
again before returning to balance the incrementation carried out by
sci_startup().
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
One samsung build fix due to a mis-applied patch, and a small set of OMAP fixes.
This should be the last from arm-soc for 3.3, hopefully.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=PLTM
-----END PGP SIGNATURE-----
Merge tag 'fixes-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull last minute fixes from Olof Johansson:
"One samsung build fix due to a mis-applied patch, and a small set of
OMAP fixes. This should be the last from arm-soc for 3.3, hopefully."
* tag 'fixes-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: S3C2440: Fixed build error for s3c244x
ARM: OMAP2+: Fix module build errors with CONFIG_OMAP4_ERRATA_I688
ARM: OMAP: id: Add missing break statement in omap3xxx_check_revision
ARM: OMAP2+: Remove apply_uV constraints for fixed regulator
ARM: OMAP: irqs: Fix NR_IRQS value to handle PRCM interrupts
Fixes up a duplicate #include, adds an empty implementation of
of_find_compatible_node() and make git ignore .dtb files. And fix
up bus name on OF described PHYs. Nothing exciting here.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=/fxH
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux-2.6
Pull minor devicetree bug fixes and documentation updates from Grant Likely:
"Fixes up a duplicate #include, adds an empty implementation of
of_find_compatible_node() and make git ignore .dtb files. And fix up
bus name on OF described PHYs. Nothing exciting here."
* tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux-2.6:
doc: dt: Fix broken reference in gpio-leds documentation
of/mdio: fix fixed link bus name
of/fdt.c: asm/setup.h included twice
of: add picochip vendor prefix
dt: add empty of_find_compatible_node function
ARM: devicetree: Add .dtb files to arch/arm/boot/.gitignore
Russell King (1):
Fix section mismatch in spi-pl022.c
Minor fix for pl022_dma_probe() function which was put in the wrong section.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=nTfV
-----END PGP SIGNATURE-----
Merge tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6
Pull SPI section mismatch bug fix for v3.3-rc3 from Grant Likely:
"Minor fix for pl022_dma_probe() function which was put in the wrong
section."
* tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6:
Fix section mismatch in spi-pl022.c
1bd612a hwmon: (jc42) Add support for AT30TS00, TS3000GB2, TSE2002GB2, and MCP9804
7ad6307 hwmon: (zl6100) Maintain delay parameter in driver instance data
7cb3c44 hwmon: (pmbus_core) Fix maximum number of POUT alarm attributes
4de8612 hwmon: (jc42) Add support for ST Microelectronics STTS2002 and STTS3000
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=mjD6
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull four hwmon patches from Guenter Roeck
* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (jc42) Add support for AT30TS00, TS3000GB2, TSE2002GB2, and MCP9804
hwmon: (zl6100) Maintain delay parameter in driver instance data
hwmon: (pmbus_core) Fix maximum number of POUT alarm attributes
hwmon: (jc42) Add support for ST Microelectronics STTS2002 and STTS3000
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Cc: Olaf Hering <olaf@aepfle.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixed following:
arch/arm/mach-s3c2440/s3c244x.c: In function 's3c244x_restart':
arch/arm/mach-s3c2440/s3c244x.c:209: error: expected declaration or statement at end of input
make[1]: *** [arch/arm/mach-s3c24xx/s3c244x.o] Error 1
make: *** [arch/arm/mach-s3c24xx] Error 2
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
snd_hdspm uses its own ioctls to acquire config- and status information.
Expose the corresponding ioctl handler via ioctl_compat, so that 32bit
applications can use it on 64bit kernels.
Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This function is called from enable_iommus(), which in turn is used
from amd_iommu_resume().
Cc: stable@vger.kernel.org
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Mesa may set it to 1, causing all primitives to be killed.
v2: also update the r7xx code
Signed-off-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
|kernel BUG at kernel/rtmutex.c:724!
|[<c029599c>] (rt_spin_lock_slowlock+0x108/0x2bc) from [<c01c2330>] (defer_bh+0x1c/0xb4)
|[<c01c2330>] (defer_bh+0x1c/0xb4) from [<c01c3afc>] (rx_complete+0x14c/0x194)
|[<c01c3afc>] (rx_complete+0x14c/0x194) from [<c01cac88>] (usb_hcd_giveback_urb+0xa0/0xf0)
|[<c01cac88>] (usb_hcd_giveback_urb+0xa0/0xf0) from [<c01e1ff4>] (musb_giveback+0x34/0x40)
|[<c01e1ff4>] (musb_giveback+0x34/0x40) from [<c01e2b1c>] (musb_advance_schedule+0xb4/0x1c0)
|[<c01e2b1c>] (musb_advance_schedule+0xb4/0x1c0) from [<c01e2ca8>] (musb_cleanup_urb.isra.9+0x80/0x8c)
|[<c01e2ca8>] (musb_cleanup_urb.isra.9+0x80/0x8c) from [<c01e2ed0>] (musb_urb_dequeue+0xec/0x108)
|[<c01e2ed0>] (musb_urb_dequeue+0xec/0x108) from [<c01cbb90>] (unlink1+0xbc/0xcc)
|[<c01cbb90>] (unlink1+0xbc/0xcc) from [<c01cc2ec>] (usb_hcd_unlink_urb+0x54/0xa8)
|[<c01cc2ec>] (usb_hcd_unlink_urb+0x54/0xa8) from [<c01c2a84>] (unlink_urbs.isra.17+0x2c/0x58)
|[<c01c2a84>] (unlink_urbs.isra.17+0x2c/0x58) from [<c01c2b44>] (usbnet_terminate_urbs+0x94/0x10c)
|[<c01c2b44>] (usbnet_terminate_urbs+0x94/0x10c) from [<c01c2d68>] (usbnet_stop+0x100/0x15c)
|[<c01c2d68>] (usbnet_stop+0x100/0x15c) from [<c020f718>] (__dev_close_many+0x94/0xc8)
defer_bh() takes the lock which is hold during unlink_urbs(). The safe
walk suggest that the skb will be removed from the list and this is done
by defer_bh() so it seems to be okay to drop the lock here.
Cc: stable@kernel.org
Reported-by: AnÃbal Almeida Pinto <anibal.pinto@efacec.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
As we invalidate the inetpeer tree along with the routing cache now,
we don't need a genid to reset the redirect handling when the routing
cache is flushed.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We initialize the routing metrics with the values cached on the
inetpeer in rt_init_metrics(). So if we have the metrics cached on the
inetpeer, we ignore the user configured fib_metrics.
To fix this issue, we replace the old tree with a fresh initialized
inet_peer_base. The old tree is removed later with a delayed work queue.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The actual FW command is called in procedure "handle_resize".
Code incorrectly invoked the FW command again (in good flow), in
the modify_cq wrapper function.
Fix by skipping second FW invocation unconditionally for resize.
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
ATL1C_WORK_EVENT_RESET is zero so the original code here is a nop. The
intent was to set the zero bit.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now we have:
eth0: link *down*
br0: port 1(eth0) entered *forwarding* state
br_log_state(p) should be called *after* p->state is set
to BR_STATE_DISABLED.
Reported-by: Zilvinas Valinskas <zilvinas@wilibox.com>
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When br_log_state() is reporting state it should say "entered"
istead of "entering" since state at this point is already
changed.
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>