Граф коммитов

217429 Коммитов

Автор SHA1 Сообщение Дата
David Rientjes d19d5476f4 oom: fix locking for oom_adj and oom_score_adj
The locking order in oom_adjust_write() and oom_score_adj_write() for
task->alloc_lock and task->sighand->siglock is reversed, and lockdep
notices that irqs could encounter an ABBA scenario.

This fixes the locking order so that we always take task_lock(task) prior
to lock_task_sighand(task).

Signed-off-by: David Rientjes <rientjes@google.com>
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:05 -07:00
David Rientjes 723548bff1 oom: rewrite error handling for oom_adj and oom_score_adj tunables
It's better to use proper error handling in oom_adjust_write() and
oom_score_adj_write() instead of duplicating the locking order on various
exit paths.

Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:05 -07:00
David Rientjes 1e99bad0d9 oom: kill all threads sharing oom killed task's mm
It's necessary to kill all threads that share an oom killed task's mm if
the goal is to lead to future memory freeing.

This patch reintroduces the code removed in 8c5cd6f3 (oom: oom_kill
doesn't kill vfork parent (or child)) since it is obsoleted.

It's now guaranteed that any task passed to oom_kill_task() does not share
an mm with any thread that is unkillable.  Thus, we're safe to issue a
SIGKILL to any thread sharing the same mm.

This is especially necessary to solve an mm->mmap_sem livelock issue
whereas an oom killed thread must acquire the lock in the exit path while
another thread is holding it in the page allocator while trying to
allocate memory itself (and will preempt the oom killer since a task was
already killed).  Since tasks with pending fatal signals are now granted
access to memory reserves, the thread holding the lock may quickly
allocate and release the lock so that the oom killed task may exit.

This mainly is for threads that are cloned with CLONE_VM but not
CLONE_THREAD, so they are in a different thread group.  Non-NPTL threads
exist in the wild and this change is necessary to prevent the livelock in
such cases.  We care more about preventing the livelock than incurring the
additional tasklist in the oom killer when a task has been killed.
Systems that are sufficiently large to not want the tasklist scan in the
oom killer in the first place already have the option of enabling
/proc/sys/vm/oom_kill_allocating_task, which was designed specifically for
that purpose.

This code had existed in the oom killer for over eight years dating back
to the 2.4 kernel.

[akpm@linux-foundation.org: add nice comment]
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:05 -07:00
David Rientjes e18641e19a oom: avoid killing a task if a thread sharing its mm cannot be killed
The oom killer's goal is to kill a memory-hogging task so that it may
exit, free its memory, and allow the current context to allocate the
memory that triggered it in the first place.  Thus, killing a task is
pointless if other threads sharing its mm cannot be killed because of its
/proc/pid/oom_adj or /proc/pid/oom_score_adj value.

This patch checks whether any other thread sharing p->mm has an
oom_score_adj of OOM_SCORE_ADJ_MIN.  If so, the thread cannot be killed
and oom_badness(p) returns 0, meaning it's unkillable.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:05 -07:00
Ying Han 3d5992d2ac oom: add per-mm oom disable count
It's pointless to kill a task if another thread sharing its mm cannot be
killed to allow future memory freeing.  A subsequent patch will prevent
kills in such cases, but first it's necessary to have a way to flag a task
that shares memory with an OOM_DISABLE task that doesn't incur an
additional tasklist scan, which would make select_bad_process() an O(n^2)
function.

This patch adds an atomic counter to struct mm_struct that follows how
many threads attached to it have an oom_score_adj of OOM_SCORE_ADJ_MIN.
They cannot be killed by the kernel, so their memory cannot be freed in
oom conditions.

This only requires task_lock() on the task that we're operating on, it
does not require mm->mmap_sem since task_lock() pins the mm and the
operation is atomic.

[rientjes@google.com: changelog and sys_unshare() code]
[rientjes@google.com: protect oom_disable_count with task_lock in fork]
[rientjes@google.com: use old_mm for oom_disable_count in exec]
Signed-off-by: Ying Han <yinghan@google.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:05 -07:00
Matt Mackall 0f4d208f19 Documentation/filesystems/proc.txt: improve smaps field documentation
Signed-off-by: Matt Mackall <mpm@selenic.com>
Cc: Nikanth Karthikesan <knikanth@suse.de>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:05 -07:00
WANG Cong a4f7326da2 vmcore: it is not experimental any more
We use vmcore in our production kernel for a long time, it is pretty
stable now.  So I don't think we need to mark it as experimental any more.

Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:05 -07:00
Richard Weinberger dbec921370 um: fix IRQ flag handling naming
Commit df9ee292 ("Fix IRQ flag handling naming") changed the IRQ flag
handling naming scheme and broke UML:

In file included from arch/um/include/asm/fixmap.h:5,
                 from arch/um/include/shared/um_uaccess.h:10,
                 from arch/um/include/asm/uaccess.h:41,
                 from arch/um/include/asm/thread_info.h:13,
                 from include/linux/thread_info.h:56,
                 from include/linux/preempt.h:9,
                 from include/linux/spinlock.h:50,
                 from include/linux/seqlock.h:29,
                 from include/linux/time.h:8,
                 from include/linux/stat.h:60,
                 from include/linux/module.h:10,
                 from init/main.c:13:
arch/um/include/asm/system.h:11:1: warning: "local_save_flags" redefined

This patch brings the new scheme to UML and makes it work again.

Signed-off-by: Richard Weinberger <richard@nod.at>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:05 -07:00
Masanori ITOH 8474b591fa percpu: fix list_head init bug in __percpu_counter_init()
WARNING: at lib/list_debug.c:26 __list_add+0x3f/0x81()
Hardware name: Express5800/B120a [N8400-085]
list_add corruption. next->prev should be prev (ffffffff81a7ea00), but was dead000000200200. (next=ffff88080b872d58).
Modules linked in: aoe ipt_MASQUERADE iptable_nat nf_nat autofs4 sunrpc bridge 8021q garp stp llc ipv6 cpufreq_ondemand acpi_cpufreq freq_table dm_round_robin dm_multipath kvm_intel kvm uinput lpfc scsi_transport_fc igb ioatdma scsi_tgt i2c_i801 i2c_core dca iTCO_wdt iTCO_vendor_support pcspkr shpchp megaraid_sas [last unloaded: aoe]
Pid: 54, comm: events/3 Tainted: G        W  2.6.34-vanilla1 #1
Call Trace:
[<ffffffff8104bd77>] warn_slowpath_common+0x7c/0x94
[<ffffffff8104bde6>] warn_slowpath_fmt+0x41/0x43
[<ffffffff8120fd2e>] __list_add+0x3f/0x81
[<ffffffff81212a12>] __percpu_counter_init+0x59/0x6b
[<ffffffff810d8499>] bdi_init+0x118/0x17e
[<ffffffff811f2c50>] blk_alloc_queue_node+0x79/0x143
[<ffffffff811f2d2b>] blk_alloc_queue+0x11/0x13
[<ffffffffa02a931d>] aoeblk_gdalloc+0x8e/0x1c9 [aoe]
[<ffffffffa02aa655>] aoecmd_sleepwork+0x25/0xa8 [aoe]
[<ffffffff8106186c>] worker_thread+0x1a9/0x237
[<ffffffffa02aa630>] ? aoecmd_sleepwork+0x0/0xa8 [aoe]
[<ffffffff81065827>] ? autoremove_wake_function+0x0/0x39
[<ffffffff810616c3>] ? worker_thread+0x0/0x237
[<ffffffff810653ad>] kthread+0x7f/0x87
[<ffffffff8100aa24>] kernel_thread_helper+0x4/0x10
[<ffffffff8106532e>] ? kthread+0x0/0x87
[<ffffffff8100aa20>] ? kernel_thread_helper+0x0/0x10

It's because there is no initialization code for a list_head contained in
the struct backing_dev_info under CONFIG_HOTPLUG_CPU, and the bug comes up
when block device drivers calling blk_alloc_queue() are used.  In case of
me, I got them by using aoe.

Signed-off-by: Masanori Itoh <itoumsn@nttdata.co.jp>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:04 -07:00
Andrew Morton 52c5171214 kfifo: disable __kfifo_must_check_helper()
This helper is wrong: it coerces signed values into unsigned ones, so code
such as

	if (kfifo_alloc(...) < 0) {
		error
	}

will fail to detect the error.

So let's disable __kfifo_must_check_helper() for 2.6.36.

Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Stefani Seibold <stefani@seibold.net>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:04 -07:00
Richard Weinberger 1b627d5771 hostfs: fix UML crash: remove f_spare from hostfs
365b1818 ("add f_flags to struct statfs(64)") resized f_spare within
struct statfs which caused a UML crash.  There is no need to copy f_spare.

Signed-off-by: Richard Weinberger <richard@nod.at>
Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Tested-by: Toralf Förster <toralf.foerster@gmx.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:04 -07:00
Eric Dumazet de5e2ddf9b ipmi: proper spinlock initialization
Unloading ipmi module can trigger following error.  (if
CONFIG_DEBUG_SPINLOCK=y)

[ 9633.779590] BUG: spinlock bad magic on CPU#1, rmmod/7170
[ 9633.779606]  lock: f41f5414, .magic: 00000000, .owner:
<none>/-1, .owner_cpu: 0
[ 9633.779626] Pid: 7170, comm: rmmod Not tainted
2.6.36-rc7-11474-gb71eb1e-dirty #328
[ 9633.779644] Call Trace:
[ 9633.779657]  [<c13921cc>] ? printk+0x18/0x1c
[ 9633.779672]  [<c11a1f33>] spin_bug+0xa3/0xf0
[ 9633.779685]  [<c11a1ffd>] do_raw_spin_lock+0x7d/0x160
[ 9633.779702]  [<c1131537>] ? release_sysfs_dirent+0x47/0xb0
[ 9633.779718]  [<c1131b78>] ? sysfs_addrm_finish+0xa8/0xd0
[ 9633.779734]  [<c1394bac>] _raw_spin_lock_irqsave+0xc/0x20
[ 9633.779752]  [<f99d93da>] cleanup_one_si+0x6a/0x200 [ipmi_si]
[ 9633.779768]  [<c11305b2>] ? sysfs_hash_and_remove+0x72/0x80
[ 9633.779786]  [<f99dcf26>] ipmi_pnp_remove+0xd/0xf [ipmi_si]
[ 9633.779802]  [<c11f622b>] pnp_device_remove+0x1b/0x40

Fix this by initializing spinlocks in a smi_info_alloc() helper function,
right after memory allocation and clearing.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: David Miller <davem@davemloft.net>
Cc: Yinghai Lu <yinghai@kernel.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:04 -07:00
Michael Hennerich 1f9fa5216e drivers/misc/ad525x_dpot.c: fix typo in spi write16 and write24 transfer counts
This is a bug fix.  Some SPI connected devices using 16/24 bit accesses,
previously failed, now work.

This typo slipped in after testing, during some restructuring.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Chris Verges <chrisv@cyberswitching.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:04 -07:00
Richard Weinberger 6915e04f88 um: remove PAGE_SIZE alignment in linker script causing kernel segfault.
The linker script cleanup that I did in commit 5d150a97f9 ("um: Clean up
linker script using standard macros.") (2.6.32) accidentally introduced an
ALIGN(PAGE_SIZE) when converting to use INIT_TEXT_SECTION; Richard
Weinberger reported that this causes the kernel to segfault with
CONFIG_STATIC_LINK=y.

I'm not certain why this extra alignment is a problem, but it seems likely
it is because previously

__init_begin = _stext = _text = _sinittext

and with the extra ALIGN(PAGE_SIZE), _sinittext becomes different from the
rest.  So there is likely a bug here where something is assuming that
_sinittext is the same as one of those other symbols.  But reverting the
accidental change fixes the regression, so it seems worth committing that
now.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Reported-by: Richard Weinberger <richard@nod.at>
Cc: Jeff Dike <jdike@addtoit.com>
Tested by: Antoine Martin <antoine@nagafix.co.uk>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:04 -07:00
Robin Holt 09358972bf sgi-xp: incoming XPC channel messages can come in after the channel's partition structures have been torn down
Under some workloads, some channel messages have been observed being
delayed on the sending side past the point where the receiving side has
been able to tear down its partition structures.

This condition is already detected in xpc_handle_activate_IRQ_uv(), but
that information is not given to xpc_handle_activate_mq_msg_uv().  As a
result, xpc_handle_activate_mq_msg_uv() assumes the structures still exist
and references them, causing a NULL-pointer deref.

Signed-off-by: Robin Holt <holt@sgi.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:03 -07:00
Richard Weinberger 482db6df17 um: fix global timer issue when using CONFIG_NO_HZ
This fixes a issue which was introduced by fe2cc53e ("uml: track and make
up lost ticks").

timeval_to_ns() returns long long and not int.  Due to that UML's timer
did not work properlt and caused timer freezes.

Signed-off-by: Richard Weinberger <richard@nod.at>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:03 -07:00
Mel Gorman b7f50cfa36 mm, page-allocator: do not check the state of a non-existant buddy during free
There is a bug in commit 6dda9d55 ("page allocator: reduce fragmentation
in buddy allocator by adding buddies that are merging to the tail of the
free lists") that means a buddy at order MAX_ORDER is checked for merging.
 A page of this order never exists so at times, an effectively random
piece of memory is being checked.

Alan Curry has reported that this is causing memory corruption in
userspace data on a PPC32 platform (http://lkml.org/lkml/2010/10/9/32).
It is not clear why this is happening.  It could be a cache coherency
problem where pages mapped in both user and kernel space are getting
different cache lines due to the bad read from kernel space
(http://lkml.org/lkml/2010/10/13/179).  It could also be that there are
some special registers being io-remapped at the end of the memmap array
and that a read has special meaning on them.  Compiler bugs have been
ruled out because the assembly before and after the patch looks relatively
harmless.

This patch fixes the problem by ensuring we are not reading a possibly
invalid location of memory.  It's not clear why the read causes corruption
but one way or the other it is a buggy read.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Corrado Zoccolo <czoccolo@gmail.com>
Reported-by: Alan Curry <pacman@kosh.dhis.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:03 -07:00
Andrew Morton a75d377686 types.h: move misplaced comment
This comment landed in the wrong place.

Cc: Andi Kleen <andi@firstfloor.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Paris <eparis@redhat.com>
Cc: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:03 -07:00
KAMEZAWA Hiroyuki f8f72ad539 mm: fix return value of scan_lru_pages in memory unplug
scan_lru_pages returns pfn. So, it's type should be "unsigned long"
not "int".

Note: I guess this has been work until now because memory hotplug tester's
      machine has not very big memory....
      physical address < 32bit << PAGE_SHIFT.

Reported-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:03 -07:00
Linus Torvalds 45352bbf48 Merge git://git.infradead.org/battery-2.6
* git://git.infradead.org/battery-2.6:
  power_supply: Makefile cleanup
  bq27x00_battery: Add missing kfree(di->bus) in bq27x00_battery_remove()
  power_supply: Introduce maximum current property
  power_supply: Add types for USB chargers
  ds2782_battery: Fix units
  power_supply: Add driver for TWL4030/TPS65950 BCI charger
  bq20z75: Add support for more power supply properties
  wm831x_power: Add missing kfree(wm831x_power) in wm831x_power_remove()
  jz4740-battery: Add missing kfree(jz_battery) in jz_battery_remove()
  ds2760_battery: Add missing kfree(di) in ds2760_battery_remove()
  olpc_battery: Fix endian neutral breakage for s16 values
  ds2760_battery: Fix W1 and W1_SLAVE_DS2760 dependency
  pcf50633-charger: Add missing sysfs_remove_group()
  power_supply: Add driver for TI BQ20Z75 gas gauge IC
  wm831x_power: Remove duplicate chg mask
  omap: rx51: Add support for USB chargers
  power_supply: Add isp1704 charger detection driver
2010-10-26 10:14:23 -07:00
Linus Torvalds da62aa69c1 Merge branch 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/i7core
* 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/i7core: (34 commits)
  i7core_edac: return -ENODEV when devices were already probed
  i7core_edac: properly terminate pci_dev_table
  i7core_edac: Avoid PCI refcount to reach zero on successive load/reload
  i7core_edac: Fix refcount error at PCI devices
  i7core_edac: it is safe to i7core_unregister_mci() when mci=NULL
  i7core_edac: Fix an oops at i7core probe
  i7core_edac: Remove unused member channels in i7core_pvt
  i7core_edac: Remove unused arg csrow from get_dimm_config
  i7core_edac: Reduce args of i7core_register_mci
  i7core_edac: Introduce i7core_unregister_mci
  i7core_edac: Use saved pointers
  i7core_edac: Check probe counter in i7core_remove
  i7core_edac: Call pci_dev_put() when alloc_i7core_dev()  failed
  i7core_edac: Fix error path of i7core_register_mci
  i7core_edac: Fix order of lines in i7core_register_mci
  i7core_edac: Always do get/put for all devices
  i7core_edac: Introduce i7core_pci_ctl_create/release
  i7core_edac: Introduce free_i7core_dev
  i7core_edac: Introduce alloc_i7core_dev
  i7core_edac: Reduce args of i7core_get_onedevice
  ...
2010-10-26 10:13:48 -07:00
Linus Torvalds f1ebdd60cc Merge branch 'hwpoison' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6
* 'hwpoison' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6: (22 commits)
  Add _addr_lsb field to ia64 siginfo
  Fix migration.c compilation on s390
  HWPOISON: Remove retry loop for try_to_unmap
  HWPOISON: Turn addr_valid from bitfield into char
  HWPOISON: Disable DEBUG by default
  HWPOISON: Convert pr_debugs to pr_info
  HWPOISON: Improve comments in memory-failure.c
  x86: HWPOISON: Report correct address granuality for huge hwpoison faults
  Encode huge page size for VM_FAULT_HWPOISON errors
  Fix build error with !CONFIG_MIGRATION
  hugepage: move is_hugepage_on_freelist inside ifdef to avoid warning
  Clean up __page_set_anon_rmap
  HWPOISON, hugetlb: fix unpoison for hugepage
  HWPOISON, hugetlb: soft offlining for hugepage
  HWPOSION, hugetlb: recover from free hugepage error when !MF_COUNT_INCREASED
  hugetlb: move refcounting in hugepage allocation inside hugetlb_lock
  HWPOISON, hugetlb: add free check to dequeue_hwpoison_huge_page()
  hugetlb: hugepage migration core
  hugetlb: redefine hugepage copy functions
  hugetlb: add allocate function for hugepage migration
  ...
2010-10-26 10:13:10 -07:00
Linus Torvalds f99d055398 Merge branch 'for_linus' of git://github.com/at91linux/linux-2.6-at91
* 'for_linus' of git://github.com/at91linux/linux-2.6-at91:
  AT91: rtc: enable built-in RTC in Kconfig for at91sam9g45 family
  at91/atmel-mci: inclusion of sd/mmc driver in at91sam9g45 chip and board
  AT91: pm: make sure that r0 is 0 when dealing with cache operations
  AT91: pm: use plain cpu_do_idle() for "wait for interrupt"
  AT91: reset: extend alternate reset procedure to several chips
  AT91: reset routine cleanup, remove not needed icache flush
  AT91: trivial: align comment of at91sam9g20_reset with one more tab
  AT91: Fix AT91SAM9G20 reset as per the errata in the data sheet
  AT91: add board support for Pcontrol_G20
2010-10-26 10:03:40 -07:00
Linus Torvalds 2c518959f0 Merge branch 'for-linus' of git://gitorious.org/linux-omap-dss2/linux
* 'for-linus' of git://gitorious.org/linux-omap-dss2/linux:
  OMAP: DSS2: don't power off a panel twice
  OMAP: DSS2: OMAPFB: Allow usage of def_vrfb only for omap2,3
  OMAP: DSS2: OMAPFB: make VRFB depends on OMAP2,3
  OMAP: DSS2: OMAPFB: Allow FB_OMAP2 to build without VRFB
  arm/omap: simplify conditional
  OMAP: DSS2: DSI: Remove extra iounmap in error path
  OMAP: DSS2: Use dss_features framework on DSS2 code
  OMAP: DSS2: Introduce dss_features files
  video/omap: remove mux.h include
  ARM: omap/fb: move get_fbmem_region() to .init.text
  ARM: omap/fb: move omapfb_reserve_sram to .init.text
  ARM: omap/fb: move omap_init_fb to .init.text
  OMAP: DSS2: OMAPFB: swap front and back porches for both hsync and vsync
  OMAP: DSS2: make filter coefficient tables human readable
  OMAP: DSS2: Add SPI dependency to Kconfig of ACX565AKM panel
2010-10-26 10:02:39 -07:00
Linus Torvalds 4f6876031e Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ]: x86, cpufreq: Mark longrun_get_policy with __cpuinit.
  [CPUFREQ] add sampling_down_factor tunable to improve ondemand performance
  [CPUFREQ] arch/x86/kernel/cpu/cpufreq: Fix unsigned return type
  [CPUFREQ] drivers/cpufreq: Adjust confusing if indentation
2010-10-26 10:00:04 -07:00
Linus Torvalds 4390110fef Merge branch 'for-2.6.37' of git://linux-nfs.org/~bfields/linux
* 'for-2.6.37' of git://linux-nfs.org/~bfields/linux: (99 commits)
  svcrpc: svc_tcp_sendto XPT_DEAD check is redundant
  svcrpc: no need for XPT_DEAD check in svc_xprt_enqueue
  svcrpc: assume svc_delete_xprt() called only once
  svcrpc: never clear XPT_BUSY on dead xprt
  nfsd4: fix connection allocation in sequence()
  nfsd4: only require krb5 principal for NFSv4.0 callbacks
  nfsd4: move minorversion to client
  nfsd4: delay session removal till free_client
  nfsd4: separate callback change and callback probe
  nfsd4: callback program number is per-session
  nfsd4: track backchannel connections
  nfsd4: confirm only on succesful create_session
  nfsd4: make backchannel sequence number per-session
  nfsd4: use client pointer to backchannel session
  nfsd4: move callback setup into session init code
  nfsd4: don't cache seq_misordered replies
  SUNRPC: Properly initialize sock_xprt.srcaddr in all cases
  SUNRPC: Use conventional switch statement when reclassifying sockets
  sunrpc/xprtrdma: clean up workqueue usage
  sunrpc: Turn list_for_each-s into the ..._entry-s
  ...

Fix up trivial conflicts (two different deprecation notices added in
separate branches) in Documentation/feature-removal-schedule.txt
2010-10-26 09:55:25 -07:00
Linus Torvalds a4dd8dce14 Merge branch 'nfs-for-2.6.37' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6
* 'nfs-for-2.6.37' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  net/sunrpc: Use static const char arrays
  nfs4: fix channel attribute sanity-checks
  NFSv4.1: Use more sensible names for 'initialize_mountpoint'
  NFSv4.1: pnfs: filelayout: add driver's LAYOUTGET and GETDEVICEINFO infrastructure
  NFSv4.1: pnfs: add LAYOUTGET and GETDEVICEINFO infrastructure
  NFS: client needs to maintain list of inodes with active layouts
  NFS: create and destroy inode's layout cache
  NFSv4.1: pnfs: filelayout: introduce minimal file layout driver
  NFSv4.1: pnfs: full mount/umount infrastructure
  NFS: set layout driver
  NFS: ask for layouttypes during v4 fsinfo call
  NFS: change stateid to be a union
  NFSv4.1: pnfsd, pnfs: protocol level pnfs constants
  SUNRPC: define xdr_decode_opaque_fixed
  NFSD: remove duplicate NFS4_STATEID_SIZE
2010-10-26 09:52:09 -07:00
Nicolas Ferre 24cecc1be6 AT91: rtc: enable built-in RTC in Kconfig for at91sam9g45 family
Enable built-in RTC IP in Kconfig and modify comments and help messages.
RTT as RTC is still available but should not be selected in common case.

Reported-by: Yegor Yefremov <yegor_sub1@visionsystems.de>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-10-26 11:32:49 +02:00
Nicolas Ferre 75305d768d at91/atmel-mci: inclusion of sd/mmc driver in at91sam9g45 chip and board
This adds the support of atmel-mci sd/mmc driver in at91sam9g45 devices and
board files. This also configures the DMA controller slave interface for
at_hdmac dmaengine driver.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-10-26 11:32:49 +02:00
Nicolas Ferre a2a571b74a AT91: pm: make sure that r0 is 0 when dealing with cache operations
When using CP15 cache operations (c7), we make sure that Rd (r0)
is actually 0 as ARM 926 TRM is saying.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-10-26 11:32:48 +02:00
Nicolas Ferre 8aeeda822f AT91: pm: use plain cpu_do_idle() for "wait for interrupt"
For power management at91_pm_enter() routine, use the cpu_do_idle() for a
rock solid "wait for interrupt" implementation.
For AT91SAM9 ARM 926 based chips, we can exceed the cache line length as
we can access RAM even while in self-refresh mode.
We keep plain access to CP15 for at91rm9200 as this feature is not
available: instructions have to be in a single cache line.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-10-26 11:32:48 +02:00
Nicolas Ferre bb413db591 AT91: reset: extend alternate reset procedure to several chips
Several at91sam9 chips need the alternate reset procedure to be sure to halt
SDRAM smoothly before resetting the chip.
This is an extension of previous patch "Fix AT91SAM9G20 reset" to all chips
affected.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-10-26 11:32:48 +02:00
Nicolas Ferre 1345562b44 AT91: reset routine cleanup, remove not needed icache flush
Generalize assembler reset routine to allow use on several at91sam9 chips.
This patch replace double definitions of SDRAM controller registers and RSTC
registers with use of classical header files.

For this rework, we remove the not needed icache flush as it is already
done in the calling function: arm_machine_restart().

Rename at91sam9g20_reset.S to generalize to several chips.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-10-26 11:32:48 +02:00
Nicolas Ferre ef4d63e6f5 AT91: trivial: align comment of at91sam9g20_reset with one more tab
Preparing next patch with longer names

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-10-26 11:32:47 +02:00
Peter Horton 184c82e853 AT91: Fix AT91SAM9G20 reset as per the errata in the data sheet
If the SDRAM is not cleanly shutdown before reset it can be left driving
the bus, which then stops the bootloader booting from NAND.

Signed-off-by: Peter Horton <phorton@bitbox.co.uk>
[nicolas.ferre@atmel.com: change file header line order]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-10-26 11:32:47 +02:00
Peter Gsellmann abf0c1bc94 AT91: add board support for Pcontrol_G20
Board is a carrier board for Stamp9G20, with additional peripherals
for a building automation system

Signed-off-by: Peter Gsellmann <pgsellmann@portner-elektronik.at>
[nicolas.ferre@atmel.com: remove machine_desc.io_pg_offst and .phys_io]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-10-26 11:32:47 +02:00
Joe Perches 411b5e0561 net/sunrpc: Use static const char arrays
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-25 22:19:52 -04:00
J. Bruce Fields 43c2e885be nfs4: fix channel attribute sanity-checks
The sanity checks here are incorrect; in the worst case they allow
values that crash the client.

They're also over-reliant on the preprocessor.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-25 22:19:41 -04:00
Linus Torvalds b18cae4224 Merge branch 'for-next' of git://android.git.kernel.org/kernel/tegra
* 'for-next' of git://android.git.kernel.org/kernel/tegra:
  spi: tegra: fix error setting on timeout
  spi: add spi_tegra driver
  tegra: harmony: enable PCI Express
  tegra: add PCI Express support
  tegra: add PCI Express clocks
  [ARM] tegra: Add APB DMA support
  [ARM] tegra: Add cpufreq support
  [ARM] tegra: common: Update common clock init table
  [ARM] tegra: clock: Add dvfs support, bug fixes, and cleanups
  [ARM] tegra: Add support for reading fuses
  [ARM] tegra: gpio: Add suspend and wake support
  [ARM] tegra: pinmux: add safe values, move tegra2, add suspend
  [ARM] tegra: add suspend and mirror irqs to legacy controller
  [ARM] tegra: Add legacy irq support
  [ARM] tegra: update iomap
2010-10-25 18:42:06 -07:00
Linus Torvalds 4833c16dea Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin:
  Blackfin: fix inverted anomaly 05000481 logic
  Blackfin: drop unused irq_panic()/DEBUG_ICACHE_CHECK
  Blackfin: ppi/spi/twi headers: add missing __BFP undef
  Blackfin: update defconfigs
  Blackfin: bfin_twi.h: start a common TWI header
  netdev: bfin_mac: push settings to platform resources
2010-10-25 18:41:32 -07:00
Erik Gilling f41649e040 spi: tegra: fix error setting on timeout
avoids derefencing an uninitialized pointer

Change-Id: Icf528441ae481e9f6f5ddc0be32c7c217fa49701
Signed-off-by: Erik Gilling <konkers@android.com>
2010-10-25 16:57:46 -07:00
Linus Torvalds e0e170bd7d Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblaze
* 'next' of git://git.monstr.eu/linux-2.6-microblaze: (42 commits)
  microblaze: Fix build with make 3.82
  fbdev/xilinxfb: Microblaze driver support
  microblaze: Support C optimized lib functions for little-endian
  microblaze: Separate library optimized functions
  microblaze: Support timer on AXI lite
  microblaze: Add support for little-endian Microblaze
  microblaze: KGDB little endian support
  microblaze: Add PVR for endians plus detection
  net: emaclite: Add support for little-endian platforms
  microblaze: trivial: Add comment for AXI pvr
  microblaze: pci-common cleanup
  microblaze: Support early console on uart16550
  microblaze: Do not compile early console support for uartlite if is disabled
  microblaze: Setup early console dynamically
  microblaze: Rename all uartlite early printk functions
  microblaze: remove early printk uarlite console dependency from header
  microblaze: Remove additional compatible properties
  microblaze: Remove hardcoded asm instraction for PVR loading
  microblaze: Use static const char * const where possible
  microblaze: Define VMALLOC_START/END
  ...
2010-10-25 16:53:11 -07:00
Linus Torvalds b20f9e5bdd Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: (24 commits)
  hwmon: lis3: Release resources in case of failure
  hwmon: lis3: Short explanations of platform data fields
  hwmon: lis3: Enhance lis3 selftest with IRQ line test
  hwmon: lis3: use block read to access data registers
  hwmon: lis3: Adjust fuzziness for 8 bit device
  hwmon: lis3: New parameters to platform data
  hwmon: lis3: restore axis enabled bits
  hwmon: lis3: Power on corrections
  hwmon: lis3: Update coordinates at polled device open
  hwmon: lis3: Cleanup interrupt handling
  hwmon: lis3: regulator control
  hwmon: lis3: pm_runtime support
  Kirkwood: add fan support for Network Space Max v2
  hwmon: add generic GPIO fan driver
  hwmon: (coretemp) fix reading of microcode revision (v2)
  hwmon: ({core, pkg, via-cpu}temp) remove unnecessary CONFIG_HOTPLUG_CPU ifdefs
  hwmon: (pkgtemp) align driver initialization style with coretemp
  hwmon: LTC4261 Hardware monitoring driver
  hwmon: (lis3) add axes module parameter for custom axis-mapping
  hwmon: (hp_accel) Add HP Mini 510x family support
  ...
2010-10-25 16:25:31 -07:00
David Howells 5260562754 MN10300: Fix the PERCPU() alignment to allow for workqueues
In the MN10300 arch, we occasionally see an assertion being tripped in
alloc_cwqs() at the following line:

        /* just in case, make sure it's actually aligned */
  --->  BUG_ON(!IS_ALIGNED(wq->cpu_wq.v, align));
        return wq->cpu_wq.v ? 0 : -ENOMEM;

The values are:

        wa->cpu_wq.v => 0x902776e0
        align => 0x100

and align is calculated by the following:

        const size_t align = max_t(size_t, 1 << WORK_STRUCT_FLAG_BITS,
                                   __alignof__(unsigned long long));

This is because the pointer in question (wq->cpu_wq.v) loses some of its
lower bits to control flags, and so the object it points to must be
sufficiently aligned to avoid the need to use those bits for pointing to
things.

Currently, 4 control bits and 4 colour bits are used in normal
circumstances, plus a debugging bit if debugging is set.  This requires
the cpu_workqueue_struct struct to be at least 256 bytes aligned (or 512
bytes aligned with debugging).

PERCPU() alignment on MN13000, however, is only 32 bytes as set in
vmlinux.lds.S.  So we set this to PAGE_SIZE (4096) to match most other
arches and stick a comment in alloc_cwqs() for anyone else who triggers
the assertion.

Reported-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Mark Salter <msalter@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-25 16:24:06 -07:00
J. Bruce Fields 42d7ba3d6d svcrpc: svc_tcp_sendto XPT_DEAD check is redundant
The only caller (svc_send) has already checked XPT_DEAD.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-25 17:59:34 -04:00
J. Bruce Fields 01dba075d5 svcrpc: no need for XPT_DEAD check in svc_xprt_enqueue
If any xprt marked DEAD is also left BUSY for the rest of its life, then
the XPT_DEAD check here is superfluous--we'll get the same result from
the XPT_BUSY check just after.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-25 17:59:33 -04:00
J. Bruce Fields ac9303eb74 svcrpc: assume svc_delete_xprt() called only once
As long as DEAD exports are left BUSY, and svc_delete_xprt is called
only with BUSY held, then svc_delete_xprt() will never be called on an
xprt that is already DEAD.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-25 17:59:32 -04:00
J. Bruce Fields 7e4fdd0744 svcrpc: never clear XPT_BUSY on dead xprt
Once an xprt has been deleted, there's no reason to allow it to be
enqueued--at worst, that might cause the xprt to be re-added to some
global list, resulting in later corruption.

Also, note this leaves us with no need for the reference-count
manipulation here.

Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-25 17:58:40 -04:00
Samu Onkalo b11e7b3f3b hwmon: lis3: Release resources in case of failure
If lis3lv02d_init_device fails, HW resources were not released
properly. In case of failure call release_resources if available.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25 14:44:59 -07:00
Mike Frysinger ad3e01a331 Blackfin: fix inverted anomaly 05000481 logic
No one uses these MMRs so we didn't notice when the anomaly handling
logic was inverted.

Reported-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-25 17:24:00 -04:00