commit 26e8383b116d0dbe74e28f86646563ab46d66d83 upstream.
Following the failure observed with a delay of 250us, experiments were
conducted with various delays. It was found that a delay of 350us
effectively mitigated the issue.
To provide a more optimal solution while still allowing a margin for
stability, the delay is being adjusted to 500us.
Signed-off-by: Lakshmi Yadlapati <lakshmiy@us.ibm.com>
Link: https://lore.kernel.org/r/20240507194603.1305750-1-lakshmiy@us.ibm.com
Fixes: 8d655e6523 ("hwmon: (ucd90320) Add minimum delay between bus accesses")
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d02abd57e79469a026213f7f5827a98d909f236a ]
Through hidraw, userspace can cause a status report to be sent
from the device. The parsing in ccp_raw_event() may happen in
parallel to a send_usb_cmd() call (which resets the completion
for tracking the report) if it's running on a different CPU where
bottom half interrupts are not disabled.
Add a spinlock around the complete_all() in ccp_raw_event() and
reinit_completion() in send_usb_cmd() to prevent race issues.
Fixes: 40c3a44542 ("hwmon: add Corsair Commander Pro driver")
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Acked-by: Marius Zachmann <mail@mariuszachmann.de>
Link: https://lore.kernel.org/r/20240504092504.24158-4-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a034a7b0715eb51124a5263890b1ed39978ed3a ]
In ccp_raw_event(), the ccp->wait_input_report completion is
completed once. Since we're waiting for exactly one report in
send_usb_cmd(), use complete_all() instead of complete()
to mark the completion as spent.
Fixes: 40c3a44542 ("hwmon: add Corsair Commander Pro driver")
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Acked-by: Marius Zachmann <mail@mariuszachmann.de>
Link: https://lore.kernel.org/r/20240504092504.24158-3-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0cd85dc666cb08e1bd313d560cb4eff4d04219e ]
Introduce cmd_buffer, a separate buffer for storing only
the command that is sent to the device. Before this separation,
the existing buffer was shared for both the command and the
report received in ccp_raw_event(), which was copied into it.
However, because of hidraw, the raw event parsing may be triggered
in the middle of sending a command, resulting in outputting gibberish
to the device. Using a separate buffer resolves this.
Fixes: 40c3a44542 ("hwmon: add Corsair Commander Pro driver")
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Acked-by: Marius Zachmann <mail@mariuszachmann.de>
Link: https://lore.kernel.org/r/20240504092504.24158-2-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f003fda98a7a8d5f399057d92e6ed56b468657c ]
Add of_match table for "ti,amc6821" compatible string.
This fixes automatic driver loading by userspace when using device-tree,
and if built as a module like major linux distributions do.
While devices probe just fine with i2c_device_id table, userspace can't
match the "ti,amc6821" compatible string from dt with the plain
"amc6821" device id. As a result, the kernel module can not be loaded.
Cc: stable@vger.kernel.org
Signed-off-by: Josua Mayer <josua@solid-run.com>
Link: https://lore.kernel.org/r/20240307-amc6821-of-match-v1-1-5f40464a3110@solid-run.com
[groeck: Cleaned up patch description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34cf8c657cf0365791cdc658ddbca9cc907726ce ]
Currently, coretemp driver supports only 128 cores per package.
This loses some core temperature information on systems that have more
than 128 cores per package.
[ 58.685033] coretemp coretemp.0: Adding Core 128 failed
[ 58.692009] coretemp coretemp.0: Adding Core 129 failed
...
Enlarge the limitation to 512 because there are platforms with more than
256 cores per package.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20240202092144.71180-4-rui.zhang@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fdaf0c8629d4524a168cb9e4ad4231875749b28c ]
Before commit 7108b80a54 ("hwmon/coretemp: Handle large core ID
value"), there is a fixed mapping between
1. cpu_core_id
2. the index in pdata->core_data[] array
3. the sysfs attr name, aka "tempX_"
The later two always equal cpu_core_id + 2.
After the commit, pdata->core_data[] index is got from ida so that it
can handle sparse core ids and support more cores within a package.
However, the commit erroneously maps the sysfs attr name to
pdata->core_data[] index instead of cpu_core_id + 2.
As a result, the code is not aligned with the comments, and brings user
visible changes in hwmon sysfs on systems with sparse core id.
For example, before commit 7108b80a54 ("hwmon/coretemp: Handle large
core ID value"),
/sys/class/hwmon/hwmon2/temp2_label:Core 0
/sys/class/hwmon/hwmon2/temp3_label:Core 1
/sys/class/hwmon/hwmon2/temp4_label:Core 2
/sys/class/hwmon/hwmon2/temp5_label:Core 3
/sys/class/hwmon/hwmon2/temp6_label:Core 4
/sys/class/hwmon/hwmon3/temp10_label:Core 8
/sys/class/hwmon/hwmon3/temp11_label:Core 9
after commit,
/sys/class/hwmon/hwmon2/temp2_label:Core 0
/sys/class/hwmon/hwmon2/temp3_label:Core 1
/sys/class/hwmon/hwmon2/temp4_label:Core 2
/sys/class/hwmon/hwmon2/temp5_label:Core 3
/sys/class/hwmon/hwmon2/temp6_label:Core 4
/sys/class/hwmon/hwmon2/temp7_label:Core 8
/sys/class/hwmon/hwmon2/temp8_label:Core 9
Restore the previous behavior and rework the code, comments and variable
names to avoid future confusions.
Fixes: 7108b80a54 ("hwmon/coretemp: Handle large core ID value")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20240202092144.71180-3-rui.zhang@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e440abc894585a34c2904a32cd54af1742311b3 ]
Fix a bug that pdata->cpu_map[] is set before out-of-bounds check.
The problem might be triggered on systems with more than 128 cores per
package.
Fixes: 7108b80a54 ("hwmon/coretemp: Handle large core ID value")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240202092144.71180-2-rui.zhang@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Stable-dep-of: fdaf0c8629d4 ("hwmon: (coretemp) Fix bogus core_id to attr name mapping")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1168491e7f53581ba7b6014a39a49cfbbb722feb ]
the ASPEED_PTCR_RESULT Register can only hold the result for a
single fan input. Adding a mutex to protect the register until the
reading is done.
Signed-off-by: Loic Prylli <lprylli@netflix.com>
Signed-off-by: Alexander Hansen <alexander.hansen@9elements.com>
Fixes: 2d7a548a3e ("drivers: hwmon: Support for ASPEED PWM/Fan tach")
Link: https://lore.kernel.org/r/121d888762a1232ef403cf35230ccf7b3887083a.1699007401.git.alexander.hansen@9elements.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 307004e8b254ad28e150b63f299ab9caa4bc7c3e ]
It seems that when the driver is built-in, the HID bus is
initialized after the driver is loaded, which whould cause
module_hid_driver() to fail.
Fix this by registering the driver after the HID bus using
late_initcall() in accordance with other hwmon HID drivers.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231207210723.222552-1-W_Armin@gmx.de
[groeck: Dropped "compile tested" comment; the patch has been tested
but the tester did not provide a Tested-by: tag]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35fe2ad259a3bfca15ab78c8ffb5278cb6149c89 ]
There is no point in calling hid_hw_stop() if hid_hw_start() has failed.
There is no point in calling hid_hw_close() if hid_hw_open() has failed.
Update the error handling path accordingly.
Fixes: 82e3430dfa ("hwmon: add driver for NZXT Kraken X42/X52/X62/X72")
Reported-by: Aleksa Savic <savicaleksa83@gmail.com>
Closes: https://lore.kernel.org/all/121470f0-6c1f-418a-844c-7ec2e8a54b8e@gmail.com/
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jonas Malaco <jonas@protocubo.io>
Link: https://lore.kernel.org/r/a768e69851a07a1f4e29f270f4e2559063f07343.1701617030.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1fefca6c57fb928d2131ff365270cbf863d89c88 ]
The ACPI specification says:
"If an error occurs while obtaining the meter reading or if the value
is not available then an Integer with all bits set is returned"
Since the "integer" is 32 bits in case of the ACPI power meter,
userspace will get a power reading of 2^32 * 1000 miliwatts (~4.29 MW)
in case of such an error. This was discovered due to a lm_sensors
bugreport (https://github.com/lm-sensors/lm-sensors/issues/460).
Fix this by returning -ENODATA instead.
Tested-by: <urbinek@gmail.com>
Fixes: de584afa5e ("hwmon driver for ACPI 4.0 power meters")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231124182747.13956-1-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bbfff736d30e5283ad09e748caff979d75ddef7f ]
When build with W=1 and "-Werror=format-truncation", below error is
observed in coretemp driver,
drivers/hwmon/coretemp.c: In function 'create_core_data':
>> drivers/hwmon/coretemp.c:393:34: error: '%s' directive output may be truncated writing likely 5 or more bytes into a region of size between 3 and 13 [-Werror=format-truncation=]
393 | "temp%d_%s", attr_no, suffixes[i]);
| ^~
drivers/hwmon/coretemp.c:393:26: note: assuming directive output of 5 bytes
393 | "temp%d_%s", attr_no, suffixes[i]);
| ^~~~~~~~~~~
drivers/hwmon/coretemp.c:392:17: note: 'snprintf' output 7 or more bytes (assuming 22) into a destination of size 19
392 | snprintf(tdata->attr_name[i], CORETEMP_NAME_LENGTH,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
393 | "temp%d_%s", attr_no, suffixes[i]);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Given that
1. '%d' could take 10 charactors,
2. '%s' could take 10 charactors ("crit_alarm"),
3. "temp", "_" and the NULL terminator take 6 charactors,
fix the problem by increasing CORETEMP_NAME_LENGTH to 28.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Fixes: 7108b80a54 ("hwmon/coretemp: Handle large core ID value")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310200443.iD3tUbbK-lkp@intel.com/
Link: https://lore.kernel.org/r/20231025122316.836400-1-rui.zhang@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a5b3370a1d9750eca325292e291c8c7cb8cf2e0 ]
axi_fan_control_irq_handler(), dependent on the private
axi_fan_control_data structure, might be called before the hwmon
device is registered. That will cause an "Unable to handle kernel
NULL pointer dereference" error.
Fixes: 8412b410fa ("hwmon: Support ADI Fan Control IP")
Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231025132100.649499-1-nuno.sa@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f38963b9cd upstream.
Skip status check for both pfe1100 and pfe3000 because the communication
error is also observed on pfe1100 devices.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Fixes: 626bb2f3fb hwmon: (pmbus) add driver for BEL PFE1100 and PFE3000
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230804221403.28931-1-rentao.bupt@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e146503ac6 upstream.
Industrial processor i3255 supports temperatures -40 deg celcius
to 105 deg Celcius. The current implementation of k10temp_read_temp
rounds off any negative temperatures to '0'. To fix this,
the following changes have been made.
A flag 'disp_negative' is added to struct k10temp_data to support
AMD i3255 processors. Flag 'disp_negative' is set if 3255 processor
is found during k10temp_probe. Flag 'disp_negative' is used to
determine whether to round off negative temperatures to '0' in
k10temp_read_temp.
Signed-off-by: Baskaran Kannan <Baski.Kannan@amd.com>
Link: https://lore.kernel.org/r/20230727162159.1056136-1-Baski.Kannan@amd.com
Fixes: aef17ca127 ("hwmon: (k10temp) Only apply temperature offset if result is positive")
Cc: stable@vger.kernel.org
[groeck: Fixed multi-line comment]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b153a0bb41 ]
The PMON_CONFIG register on ADM1272 is a 16 bit register. Writing a 8 bit
value into it clears the upper 8 bits of the register, resulting in
unexpected side effects. Fix by writing the 16 bit register value.
Also, it has been reported that temperature readings are sometimes widely
inaccurate, to the point where readings may result in device shutdown due
to errant overtemperature faults. Improve by enabling temperature sampling.
While at it, move the common code for ADM1272 and ADM1278 into a separate
function, and clarify in the error message that an attempt was made to
enable both VOUT and temperature monitoring.
Last but not least, return the error code reported by the underlying I2C
controller and not -ENODEV if updating the PMON_CONFIG register fails.
After all, this does not indicate that the chip is not present, but an
error in the communication with the chip.
Fixes: 4ff0ce227a ("hwmon: (pmbus/adm1275) Add support for ADM1272")
Fixes: 9da9c2dc57 ("hwmon: (adm1275) enable adm1272 temperature reporting")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230602213447.3557346-1-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a3cd66d7cb ]
Current driver assume PWR_AVG and VI_AVG as 1 by default, and user needs
to set sample averaging via sysfs manually.
This patch parses the properties "adi,power-sample-average" and
"adi,volt-curr-sample-average" from device tree, and setting sample
averaging during probe. Input value must be one of value in the
list [1, 2, 4, 8, 16, 32, 64, 128].
Signed-off-by: Potin Lai <potin.lai@quantatw.com>
Link: https://lore.kernel.org/r/20220302123817.27025-2-potin.lai@quantatw.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Stable-dep-of: b153a0bb41 ("hwmon: (pmbus/adm1275) Fix problems with temperature monitoring on ADM1272")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6d80df47e ]
The GSC fan pwm temperature register is in centidegrees celcius but the
Linux hwmon convention is to use milidegrees celcius. Fix the scaling.
Fixes: 3bce5377ef ("hwmon: Add Gateworks System Controller support")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Link: https://lore.kernel.org/r/20230606153004.1448086-1-tharvey@gateworks.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 93822f5161 ]
The bit flags in pmbus_driver_info functionality for YM-2151E chip were
joined with a comma operator instead of a bitwise OR. This means that
the last constant PMBUS_HAVE_IIN was not OR-ed with the other
PM_BUS_HAVE_* constants for this page but it initialized the next element
of the func array (which was not accessed from anywhere because of the
number of pages).
However, there is no need for setting PMBUS_HAVE_IIN in the 5Vsb page
because this command does not seem to be paged. Obviously, the device
only has one IIN sensor, so it doesn't make sense to query it again from
the second page.
Fixes: 1734b4135a ("hwmon: Add driver for fsp-3y PSUs and PDUs")
Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Tomáš Pecka <tomas.pecka@cesnet.cz>
Link: https://lore.kernel.org/r/20230420171939.212040-1-tomas.pecka@cesnet.cz
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 968b66ffeb ]
Fix voltage scaling for chips that have 10.9mV ADCs, where scaling was
not performed.
Fixes: ead8080351 ("hwmon: (it87) Add support for IT8732F")
Signed-off-by: Frank Crawford <frank@crawford.emu.id.au>
Link: https://lore.kernel.org/r/20230318080543.1226700-2-frank@crawford.emu.id.au
[groeck: Update subject and description to focus on bug fix]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2315332efc ]
It is not sufficient to check of_node in current device.
In some cases, this would cause the sensor registration to fail.
This patch looks for device's ancestors to find a valid of_node if any.
Fixes: d560168b5d ("hwmon: (core) New hwmon registration API")
Signed-off-by: Phinex Hung <phinex@realtek.com>
Link: https://lore.kernel.org/r/20230321060224.3819-1-phinex@realtek.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab00709310 ]
The ltc2992 drivers uses a mutex and I2C bus access in its GPIO chip `set`
and `get` implementation. This means these functions can sleep and the GPIO
chip should set the `can_sleep` property to true.
This will ensure that a warning is printed when trying to set or get the
GPIO value from a context that potentially can't sleep.
Fixes: 9ca26df1ba ("hwmon: (ltc2992) Add support for GPIOs.")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20230314093146.2443845-2-lars@metafoo.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5bb73b3f5 ]
The adm1266 driver uses I2C bus access in its GPIO chip `set` and `get`
implementation. This means these functions can sleep and the GPIO chip
should set the `can_sleep` property to true.
This will ensure that a warning is printed when trying to set or get the
GPIO value from a context that potentially can't sleep.
Fixes: d98dfad35c ("hwmon: (pmbus/adm1266) Add support for GPIOs")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20230314093146.2443845-1-lars@metafoo.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00d85e8179 ]
The driver will match mostly by DT table (even thought there is regular
ID table) so there is little benefit in of_match_ptr (this also allows
ACPI matching via PRP0001, even though it might not be relevant here).
This also fixes !CONFIG_OF error:
drivers/hwmon/tmp513.c:610:34: error: ‘tmp51x_of_match’ defined but not used [-Werror=unused-const-variable=]
Fixes: 59dfa75e5d ("hwmon: Add driver for Texas Instruments TMP512/513 sensor chips.")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230312193723.478032-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d655e6523 ]
When probing the ucd90320 access to some of the registers randomly fails.
Sometimes it NACKs a transfer, sometimes it returns just random data and
the PEC check fails.
Experimentation shows that this seems to be triggered by a register access
directly back to back with a previous register write. Experimentation also
shows that inserting a small delay after register writes makes the issue go
away.
Use a similar solution to what the max15301 driver does to solve the same
problem. Create a custom set of bus read and write functions that make sure
that the delay is added.
Fixes: a470f11c5b ("hwmon: (pmbus/ucd9000) Add support for UCD90320 Power Sequencer")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20230312160312.2227405-1-lars@metafoo.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c93f5e2ab5 ]
ret is set to 0 which do not indicate an error.
Return -EINVAL instead.
Fixes: a9e9dd9c6d ("hwmon: (ina3221) Read channel input source info from DT")
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20230310075035.246083-1-marcus.folkesson@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb090e64cf ]
In xgene_hwmon_probe, &ctx->workq is bound with xgene_hwmon_evt_work.
Then it will be started.
If we remove the driver which will call xgene_hwmon_remove to clean up,
there may be unfinished work.
The possible sequence is as follows:
Fix it by finishing the work before cleanup in xgene_hwmon_remove.
CPU0 CPU1
|xgene_hwmon_evt_work
xgene_hwmon_remove |
kfifo_free(&ctx->async_msg_fifo);|
|
|kfifo_out_spinlocked
|//use &ctx->async_msg_fifo
Fixes: 2ca492e22c ("hwmon: (xgene) Fix crash when alarm occurs before driver probe")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Link: https://lore.kernel.org/r/20230310084007.1403388-1-zyytlz.wz@163.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 48e8186870 ]
The wrong bits are masked in the hysteresis register; indices 0 and 2
should zero bits [7:4] and preserve bits [3:0], and index 1 should zero
bits [3:0] and preserve bits [7:4].
Fixes: 1c301fc539 ("hwmon: Add a driver for the ADT7475 hardware monitoring chip")
Signed-off-by: Tony O'Brien <tony.obrien@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20230222005228.158661-3-tony.obrien@alliedtelesis.co.nz
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f8d1e3b6f ]
Throughout the ADT7475 driver, attributes relating to the temperature
sensors are displayed in the order Remote 1, Local, Remote 2. Make
temp_st_show() conform to this expectation so that values set by
temp_st_store() can be displayed using the correct attribute.
Fixes: 8f05bcc33e ("hwmon: (adt7475) temperature smoothing")
Signed-off-by: Tony O'Brien <tony.obrien@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20230222005228.158661-2-tony.obrien@alliedtelesis.co.nz
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d03bbff45 ]
Coretemp's platform driver is unconventional. All the real work is done
globally by the initcall and CPU hotplug notifiers, while the "driver"
effectively just wraps an allocation and the registration of the hwmon
interface in a long-winded round-trip through the driver core. The whole
logic of dynamically creating and destroying platform devices to bring
the interfaces up and down is error prone, since it assumes
platform_device_add() will synchronously bind the driver and set drvdata
before it returns, thus results in a NULL dereference if drivers_autoprobe
is turned off for the platform bus. Furthermore, the unusual approach of
doing that from within a CPU hotplug notifier, already commented in the
code that it deadlocks suspend, also causes lockdep issues for other
drivers or subsystems which may want to legitimately register a CPU
hotplug notifier from a platform bus notifier.
All of these issues can be solved by ripping this unusual behaviour out
completely, simply tying the platform devices to the lifetime of the
module itself, and directly managing the hwmon interfaces from the
hotplug notifiers. There is a slight user-visible change in that
/sys/bus/platform/drivers/coretemp will no longer appear, and
/sys/devices/platform/coretemp.n will remain present if package n is
hotplugged off, but hwmon users should really only be looking for the
presence of the hwmon interfaces, whose behaviour remains unchanged.
Link: https://lore.kernel.org/lkml/20220922101036.87457-1-janusz.krzysztofik@linux.intel.com/
Link: https://gitlab.freedesktop.org/drm/intel/issues/6641
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Link: https://lore.kernel.org/r/20230103114620.15319-1-janusz.krzysztofik@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1ffd3c462 ]
Currently for broken fan driver returns value calculated based on error
code (0xFF) in related fan speed register.
Thus, for such fan user gets fan{n}_fault to 1 and fan{n}_input with
misleading value.
Add check for fan fault prior return speed value and return zero if
fault is detected.
Fixes: 65afb4c8e7 ("hwmon: (mlxreg-fan) Add support for Mellanox FAN driver")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20230212145730.24247-1-vadimp@nvidia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 178b01eccf ]
ltc2945_val_to_reg errors were not being handled
which would have resulted in register being set to
0 (clamped) instead of being left alone.
Fixes: 6700ce035f ("hwmon: Driver for Linear Technologies LTC2945")
Signed-off-by: Jonathan Cormier <jcormier@criticallink.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca8fd8c16a ]
A user complained that the ftsteutates driver was displaying
bogus values since its introduction. This happens because the
sensor measurements need to be scaled in order to produce
meaningful results:
- the fan speed needs to be multiplied by 60 since its in RPS
- the temperature is in degrees celsius and needs an offset of 64
- the voltage is in 1/256 of 3.3V
The offical datasheet says the voltage needs to be divided by 256,
but this is likely an off-by-one-error, since even the BIOS
devides by 255 (otherwise 3.3V could not be measured).
The voltage channels additionally need a board-specific multiplier,
however this can be done by the driver since its board-specific.
The reason the missing scaling of measurements is the way Fujitsu
used this driver when it was still out-of-tree. Back then, all
scaling was done in userspace by libsensors, even the generic one.
Tested on a Fujitsu DS3401-B1.
Fixes: 08426eda58 ("hwmon: Add driver for FTS BMC chip "Teutates"")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20221224041855.83981-2-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b744db17ab ]
Add the missing unlock before return from function jc42_write()
in the error handling case.
Fixes: 37dedaee8bc6 ("hwmon: (jc42) Convert register access and caching to regmap/regcache")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20221027062931.598247-1-yangyingliang@huawei.com
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 084ed144c4 ]
The JC42 compatible thermal sensor on Kingston KSM32ES8/16ME DIMMs
(using Micron E-Die) is an ST Microelectronics STTS2004 (manufacturer
0x104a, device 0x2201). It does not keep the previously programmed
minimum, maximum and critical temperatures after system suspend and
resume (which is a shutdown / startup cycle for the JC42 temperature
sensor). This results in an alarm on system resume because the hardware
default for these values is 0°C (so any environment temperature greater
than 0°C will trigger the alarm).
Example before system suspend:
jc42-i2c-0-1a
Adapter: SMBus PIIX4 adapter port 0 at 0b00
temp1: +34.8°C (low = +0.0°C)
(high = +85.0°C, hyst = +85.0°C)
(crit = +95.0°C, hyst = +95.0°C)
Example after system resume (without this change):
jc42-i2c-0-1a
Adapter: SMBus PIIX4 adapter port 0 at 0b00
temp1: +34.8°C (low = +0.0°C) ALARM (HIGH, CRIT)
(high = +0.0°C, hyst = +0.0°C)
(crit = +0.0°C, hyst = +0.0°C)
Apply the cached values from the JC42_REG_TEMP_UPPER,
JC42_REG_TEMP_LOWER, JC42_REG_TEMP_CRITICAL and JC42_REG_SMBUS (where
the SMBUS register is not related to this issue but a side-effect of
using regcache_sync() during system resume with the previously
cached/programmed values. This fixes the alarm due to the hardware
defaults of 0°C because the previously applied limits (set by userspace)
are re-applied on system resume.
Fixes: 175c490c9e ("hwmon: (jc42) Add support for STTS2004 and AT30TSE004")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20221023213157.11078-3-martin.blumenstingl@googlemail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f2fa4726f ]
Switch the jc42 driver to use an I2C regmap to access the registers.
Also move over to regmap's built-in caching instead of adding a
custom caching implementation. This works for JC42_REG_TEMP_UPPER,
JC42_REG_TEMP_LOWER and JC42_REG_TEMP_CRITICAL as these values never
change except when explicitly written. The cache For JC42_REG_TEMP is
dropped (regmap can't cache it because it's volatile, meaning it can
change at any time) as well for simplicity and consistency with other
drivers.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20221023213157.11078-2-martin.blumenstingl@googlemail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Stable-dep-of: 084ed144c4 ("hwmon: (jc42) Restore the min/max/critical temperatures on resume")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7dec14537c ]
As comment of pci_get_domain_bus_and_slot() says, it returns
a pci device with refcount increment, when finish using it,
the caller must decrement the reference count by calling
pci_dev_put(). So call it after using to avoid refcount leak.
Fixes: 14513ee696 ("hwmon: (coretemp) Use PCI host bridge ID to identify CPU if necessary")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221118093303.214163-1-yangyingliang@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2a87785aa ]
Smatch report warning as follows:
drivers/hwmon/ibmpex.c:509 ibmpex_register_bmc() warn:
'&data->list' not removed from list
If ibmpex_find_sensors() fails in ibmpex_register_bmc(), data will
be freed, but data->list will not be removed from driver_data.bmc_data,
then list traversal may cause UAF.
Fix by removeing it from driver_data.bmc_data before free().
Fixes: 57c7c3a0fd ("hwmon: IBM power meter driver")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20221117034423.2935739-1-cuigaosheng1@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b7f98f237 ]
pci_disable_device() need be called while module exiting, switch to use
pcim_enable(), pci_disable_device() will be called in pcim_release().
Fixes: ada072816b ("hwmon: (i5500_temp) New driver for the Intel 5500/5520/X58 chipsets")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221112125606.3751430-1-yangyingliang@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8d27d2ce8 ]
The shunt sum critical limit register value should be left shifted
by one bit as its LSB-0 is a reserved bit.
Fixes: 2057bdfb71 ("hwmon: (ina3221) Add summation feature support")
Signed-off-by: Ninad Malwade <nmalwade@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20221108044508.23463-1-nmalwade@nvidia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07e06193ea ]
The LTC2947 datasheet (Rev. B) calls out in the section "Register
Description: Non-Accumulated Result Registers" (pg. 30) that "To
calculate temperature, multiply the TEMP register value by 0.204°C
and add 5.5°C". Fix to add 5.5C and not 0.55C.
Fixes: 9f90fd652b ("hwmon: Add support for ltc2947")
Signed-off-by: Derek Nguyen <derek.nguyen@collins.com>
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Link: https://lore.kernel.org/r/20221110192108.20624-1-brandon.maier@collins.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7108b80a54 upstream.
The coretemp driver supports up to a hard-coded limit of 128 cores.
Today, the driver can not support a core with an ID above that limit.
Yet, the encoding of core ID's is arbitrary (BIOS APIC-ID) and so they
may be sparse and they may be large.
Update the driver to map arbitrary core ID numbers into appropriate
array indexes so that 128 cores can be supported, no matter the encoding
of core ID's.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Len Brown <len.brown@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20221014090147.1836-3-rui.zhang@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f9c0cf8f26 ]
On 32-bit platforms, long is 32 bits, so (long)UINT_MAX is less than
(long)SHT4X_MIN_POLL_INTERVAL, which means the clamping operation is
bogus. Fix this by clamping at INT_MAX, so that the upperbound is the
same on all platforms.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20220924101151.4168414-1-Jason@zx2c4.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lakshmi Yadlapati
Aleksa Savic
Josua Mayer
Zhang Rui
Loic Prylli
Armin Wolf
Christophe JAILLET
Dragos Bogdan
Biju Das
Tao Ren
Gilles Buloz
Baskaran Kannan
Guenter Roeck
Potin Lai
Tim Harvey
Tomáš Pecka
Chris Packham
Babu Moger
Frank Crawford
Phinex Hung
Lars-Peter Clausen
Krzysztof Kozlowski
Marcus Folkesson
Zheng Wang
Tony O'Brien
Robin Murphy
Vadim Pasternak
Jonathan Cormier
Yang Yingliang
Martin Blumenstingl
Phil Auld
Gaosheng Cui
Ninad Malwade
Derek Nguyen
Jason A. Donenfeld
Oleksandr Shamray