Граф коммитов

24 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds 991688bfc6 ARM: SoC driver updates for v4.10
Driver updates for ARM SoCs, including a couple of newly added drivers:
 
 - A new driver for the power management controller on TI Keystone
 - Support for the prerelease "SCPI" firmware protocol that ended up
   being shipped by Amlogic in their GXBB SoC.
 - A soc_device can now be matched using a glob from inside the
   kernel, when another driver wants to know the specific chip
   it is running on and cannot find out from DT, firmware or hardware.
 - Renesas SoCs now support identification through the soc_device
   interface, both in user space and kernel.
 - Renesas r8a7743 and r8a7745 gain support for their system controller
 - A new checking module for the ARM "PSCI" (not to be confused
   with "SCPI" mentioned above) firmware interface.
 - A new driver for the Tegra GMI memory interface
 - Support for the Tegra firmware interfaces with their
   power management controllers
 
 As usual, the updates for the reset controller framework are merged
 here, as they tend to touch multiple SoCs as well, including a new
 driver for the Oxford (now Broadcom) OX820 chip and the Tegra
 bpmp interface.
 
 The existing drivers for Atmel, Qualcomm, NVIDIA, TI Davinci, and
 Rockchips SoCs see some further updates.
 
 Conflicts:
 - ARCH_RENESAS now selects SOC_BUS, but no longer needs GPIOLIB
 - drivers/soc/renesas/Makefile: multiple files got added, keep
   all in logical sorting
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAWFMaGWCrR//JCVInAQLs5RAA3I1I8/R+pd5jfMaAB8Od3S4g8YSqIDjC
 EIOoDPx9GDV70+cGs4ea+L9bfGs3ePGivCtcbftNsLDAueQ2jKMa3ShqxA/MMbJE
 rWQi/ARaDFY0nHL8VPWq7XyYwwrah+/gKBr8UhkaKI0vy6DBqxyCknrS2kgF88rv
 DVs2wnRvDM7GVUax0JDzuySR7BXJIuUfS78jPMESASbTQktsZTFUyH+osiqHtptD
 M5bPC8rxOeZXljt3DOvXSdK9rVnji/A3nznY4r3tlt805eaOA7CzjVSsY27WQel0
 63uj+FgE+eM0sECIxpkNbH/HHq2V4QkUoy3fk0xPkzRbllBBpS+UieGamTnPJup8
 wf5uiH1IqLLLV9F/504S92fp0pgFPpOGYWZnBDlIbh3aGq4tMjIRqRYMTyCT02hN
 +b54v0SuImFiN6p8HMS1ugYQ+1m9TU40b5pZkzkTJbSQOMm6oi3j0A0orXU/TPKd
 FVMrlUyfh+yu+vs1hGWLs1+mBjFnxXzSc8yJeaCdX4MvCY5/aVJZ+cwq4Bk+1YU5
 9Qhkeo5JV/l9FlrjxomnEq3l/WV/pFmj7JRZsb1BM88m+5LYUf2lv11b5B4FvrTd
 yx8SSpe3+ofIijdNbJ8IywF6y0OXF6UnrlouOVdSIp+wPs+pibdU/5gQep16pvqd
 WW6sVWn6quA=
 =6dP8
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "Driver updates for ARM SoCs, including a couple of newly added
  drivers:

   - A new driver for the power management controller on TI Keystone

   - Support for the prerelease "SCPI" firmware protocol that ended up
     being shipped by Amlogic in their GXBB SoC.

   - A soc_device can now be matched using a glob from inside the
     kernel, when another driver wants to know the specific chip it is
     running on and cannot find out from DT, firmware or hardware.

   - Renesas SoCs now support identification through the soc_device
     interface, both in user space and kernel.

   - Renesas r8a7743 and r8a7745 gain support for their system
     controller

   - A new checking module for the ARM "PSCI" (not to be confused with
     "SCPI" mentioned above) firmware interface.

   - A new driver for the Tegra GMI memory interface

   - Support for the Tegra firmware interfaces with their power
     management controllers

  As usual, the updates for the reset controller framework are merged
  here, as they tend to touch multiple SoCs as well, including a new
  driver for the Oxford (now Broadcom) OX820 chip and the Tegra bpmp
  interface.

  The existing drivers for Atmel, Qualcomm, NVIDIA, TI Davinci, and
  Rockchips SoCs see some further updates"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (76 commits)
  misc: sram: remove useless #ifdef
  drivers: psci: Allow PSCI node to be disabled
  drivers: psci: PSCI checker module
  soc: renesas: Identify SoC and register with the SoC bus
  firmware: qcom: scm: Return PTR_ERR when devm_clk_get fails
  firmware: qcom: scm: Remove core, iface and bus clocks dependency
  dt-bindings: firmware: scm: Add MSM8996 DT bindings
  memory: da8xx-ddrctl: drop the call to of_flat_dt_get_machine_name()
  bus: da8xx-mstpri: drop the call to of_flat_dt_get_machine_name()
  ARM: shmobile: Document DT bindings for Product Register
  soc: renesas: rcar-sysc: add R8A7745 support
  reset: Add Tegra BPMP reset driver
  dt-bindings: firmware: Allow child nodes inside the Tegra BPMP
  dt-bindings: Add power domains to Tegra BPMP firmware
  firmware: tegra: Add BPMP support
  firmware: tegra: Add IVC library
  dt-bindings: firmware: Add bindings for Tegra BPMP
  mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()
  mailbox: Add Tegra HSP driver
  firmware: arm_scpi: add support for pre-v1.0 SCPI compatible
  ...
2016-12-15 16:03:25 -08:00
Arnd Bergmann bc28ba81db Renesas ARM Based SoC Match Updates for v4.10
* Identify SoC and register with the SoC bus
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYNeyaAAoJENfPZGlqN0++1WsQAJ6Yq6mB9+TlmKQSDmspMd1X
 cuswMJowQZSFWjiXT/3v6lUNBG7wJmXbJOWIu/V9HIAx3HXS860DRtEC0+CosZ1g
 yP/+i8g5qHtYNtOG06RaP62gJql+nMizfvtTVNlFBz5/r6Pt6Cw2VKZm/J5eIenv
 zjWwkCOH2JAcAfVu1JfqXNoNwkrPp/tbTXmodQsqm7WYNiwfk2gXNqKhROirWR0s
 n2oHVhEts1Q82i116p1mx3m7CYvned5jqph06KyHWutbxNbGGi9ikIOmS0B6ayyw
 TSU1lAsF2xIff1JDJpGkZoIZAt0NKAfSYzumz1s98Yj+8cXMVZ/IL/C4orkqV8fk
 20K3ZYyBD3fDl38OtqGDOCTX7uOLumPCmoCLdKwmEYX2ig4PbK5pNbwQNMTFH4iE
 iqGXaicbs94izsDg0hUMALfAI4oG7TwTEDGnmLfXbOx58FJPtw+VcxArt0QiaLaf
 TdrNfVyl+wMu1cvOxqI3ftmzhlzpdoLoFNrZxPORAurEGN45SzDZylnLvfxByQy4
 WixQPdS/pHofdKmvIVXIdVzxnO0xRmxAp1tZ8nYw4rkseSGvLnK9Z4d43kzvoTsr
 IW+rJBBgLIcyor6HWrSgjWK9T15FEDBbrk5U1d06IViBdYwi1c6U8y80LCaAB+8j
 y3IwB4GFFkiTUU6j3H75
 =DnnT
 -----END PGP SIGNATURE-----

Merge tag 'renesas-soc-match-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers

Merge "Renesas ARM Based SoC Match Updates for v4.10" from Simon Horman:

* Identify SoC and register with the SoC bus

* tag 'renesas-soc-match-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  soc: renesas: Identify SoC and register with the SoC bus
  ARM: shmobile: Document DT bindings for Product Register

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-11-30 16:49:22 +01:00
Arnd Bergmann d319fc6dc1 Renesas ARM Based SoC r8a7745 SYSC Driver Updates for v4.10
* Add support for the r8a7745 SoC to rcar-sysc
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYNfAfAAoJENfPZGlqN0++t14P/RukycPu2VgJ+F3G+OJoD2WS
 ltEYrhhZxIL9cjyLmiA7Mj7Ig9dMtzmiBC0W3HY5zvZN2OiOrzmNykfFdu9UN8rX
 iMZ6lDrq7o+Qsm1Q4Ab2miatqOqM7JPSacJPixLZFpvs6T79CCRMYaEeIB8AYD3O
 ij/tRDtxdvfY97iy5la9XvtA/63EmP6DZ2SxfqPXd6W0GaBg+QKBOLlcCR0yDrKh
 NosHdbiAbMapBSPbsnbhKLebpnPw159iu7VA73JbsrsFZ9IDRkwoA+wcgEEWnF8C
 b9S31TAglhL04AysUowlHjhEOU2hWPcF8rm3lisDghoUC6Rb/3gCPII+KnU6d5Z4
 QNCbY6IlWqya9wR3kavHmJHOowGt/LqrmLCnJSoTTbKgo6xPxN3kis6oRo2sY9w1
 KUJWgt9vfQ/H6ik2epkMg7sQbkBcsONUDUgVhFyaAqTKEgeIz5OggfNsYkQYYT37
 qlQkLgKweKYJmmr/ilCeVdmkdhPegII8aiYWdwb8N2cUY4I0nyUwnE+v9cdPRhxr
 LpONUZV+GtCz8O/Y2XtjxwhYoYUtHbUzSax+aw4qtBBmdyKcaQ1VIyn27gfofmht
 Q3itzk/eGp0GgnsadknYK9eOvWWjPf07/jvYgSVfL6rWGR+4/vcEht/kU+O9dnpP
 HMZ6/PrbmYoxWkY49sH7
 =pOb+
 -----END PGP SIGNATURE-----

Merge tag 'renesas-r8a7745-sysc-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers

Pull "Renesas ARM Based SoC r8a7745 SYSC Driver Updates for v4.10" from Simon Horman:

* Add support for the r8a7745 SoC to rcar-sysc

* tag 'renesas-r8a7745-sysc-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  soc: renesas: rcar-sysc: add R8A7745 support
  ARM: shmobile: r8a7745: add power domain index macros

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-11-30 16:39:48 +01:00
Geert Uytterhoeven 8d6799a9ba soc: renesas: Identify SoC and register with the SoC bus
Identify the SoC type and revision, and register this information with
the SoC bus, so it is available under /sys/devices/soc0/, and can be
checked where needed using soc_device_match().

Identification is done using the Product Register or Common Chip Code
Register, as declared in DT (PRR only for now), or using a hardcoded
fallback if missing.

Example:

    Detected Renesas R-Car Gen2 r8a7791 ES1.0
    ...
    # cat /sys/devices/soc0/{machine,family,soc_id,revision}
    Koelsch
    R-Car Gen2
    r8a7791
    ES1.0

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-23 20:22:21 +01:00
Sergei Shtylyov 141723e0cb soc: renesas: rcar-sysc: add R8A7745 support
Add support for RZ/G1E (R8A7745) SoC power areas to the R-Car SYSC driver.

Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-23 14:28:41 +01:00
Geert Uytterhoeven 527c02f66d soc: renesas: Add R-Car RST driver
Add a driver for the Renesas R-Car Gen1 RESET/WDT and R-Car Gen2/Gen3
and RZ/G RST module.

For now this driver just provides an API to obtain the state of the mode
pins, as latched at reset time.  As this is typically called from the
probe function of a clock driver, which can run much earlier than any
initcall, calling rcar_rst_read_mode_pins() just forces an early
initialization of the driver.

Despite the current simple and almost identical handling for all
supported SoCs, the driver matches against SoC-specific compatible
values, as the features provided by the hardware module differ a lot
across the various SoC families and members.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
2016-11-02 20:43:07 +01:00
Sergei Shtylyov 603311ba97 soc: renesas: rcar-sysc: add R8A7743 support
Add support for RZ/G1M (R8A7743) SoC power areas to the R-Car SYSC driver.

Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-10-17 08:21:20 +02:00
Geert Uytterhoeven ced42730d1 soc: renesas: rcar-sysc: Improve SYSC interrupt config in legacy wrapper
Align SYSC interrupt configuration in the legacy wrapper with the DT
version:
  - Mask SYSC interrupt sources before enabling them (doesn't matter
    much as they're disabled at the GIC level anyway),
  - Make sure not to clear reserved SYSCIMR bits that were set before.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-29 14:37:24 +02:00
Geert Uytterhoeven 053239987f soc: renesas: rcar-sysc: Move SYSC interrupt config to rcar-sysc driver
On R-Car H1 and Gen2, the SYSC interrupt registers are always configured
using hardcoded values in platform code. For R-Car Gen2, values are
provided for H2 and M2-W only, other SoCs are not yet supported, and
never will be.

Move this configuration from SoC-specific platform code to the
rcar_sysc_init() wrapper, so it can be skipped if the SYSC is configured
from DT. This would be the case not only for H1, H2, and M2-W using a
modern DTS, but also for other R-Car Gen2 SoCs not supported by the
platform code, relying purely on DT.

There is no longer a need to return the mapped register block, hence
make the function return void.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-29 14:37:08 +02:00
Geert Uytterhoeven b1e52287a2 soc: renesas: rcar-sysc: Make rcar_sysc_init() init the PM domains
Let rcar_sysc_init() trigger initialization of the SYSC PM domains from
DT if called before the early_initcall.
On failure, it falls back to mapping the passed register block, as
before.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-29 14:36:51 +02:00
Geert Uytterhoeven 1023578ec3 soc: renesas: rcar-sysc: Fix uninitialized error code in rcar_sysc_pd_init()
On success, rcar_sysc_pd_init() returns an uninitialized error code.
Use the return value of of_genpd_add_provider_onecell() to fix this.

This went unnoticed, as early_initcall() doesn't care about the return
value.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-29 14:36:37 +02:00
Sergei Shtylyov 7e49c84598 soc: renesas: rcar-sysc: add R8A7792 support
Add support for R-Car V2H (R8A7792) SoC power areas to the SYSC driver.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-16 10:53:57 +09:00
Geert Uytterhoeven e0c98b9171 soc: renesas: rcar-sysc: Add support for R-Car M3-W power areas
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-06 10:14:21 +09:00
Geert Uytterhoeven 23f1e2ecde soc: renesas: rcar-sysc: Add support for R-Car H3 power areas
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-26 09:56:38 +10:00
Geert Uytterhoeven 9af1dbcc30 soc: renesas: rcar-sysc: Add support for R-Car E2 power areas
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-26 09:56:37 +10:00
Geert Uytterhoeven a247eb93ef soc: renesas: rcar-sysc: Add support for R-Car M2-N power areas
R-Car M2-N is identical to R-Car M2-W w.r.t. power domains, so reuse the
definitions from the latter.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-26 09:56:37 +10:00
Geert Uytterhoeven c5fbb3c088 soc: renesas: rcar-sysc: Add support for R-Car M2-W power areas
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-26 09:56:36 +10:00
Geert Uytterhoeven ad7c9dbc25 soc: renesas: rcar-sysc: Add support for R-Car H2 power areas
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-26 09:56:35 +10:00
Geert Uytterhoeven 9b83ea17b0 soc: renesas: rcar-sysc: Add support for R-Car H1 power areas
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-26 09:56:35 +10:00
Geert Uytterhoeven 1c8c77f52d soc: renesas: rcar-sysc: Enable Clock Domain for I/O devices
On R-Car H3, some power areas (e.g. A3VP) contain I/O devices, which are
also part of the CPG/MSSR Clock Domain.
On all R-Car SoCs, devices in the "always-on" PM Domain are part of the
Clock Domain served by the CPG/MSSR or CPG/MSTP driver.

Hook up the CPG/MSTP or CPG/MSSR Clock Domain attach/detach callbacks to
enable power management using module clocks. Which callback to hook up
depends on the presence of device nodes compatible with
"renesas,cpg-mstp-clocks". This clears the path for a future migration
from the CPG/MSTP to the CPG/MSSR driver on R-Car H1 and
Gen2.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-26 09:56:27 +10:00
Geert Uytterhoeven 2f024cef5b soc: renesas: rcar-sysc: Make rcar_sysc_power_is_off() static
As of commit b12ff41658 ("ARM: shmobile: r8a7779: Remove legacy PM
Domain remainings"), rcar_sysc_power_is_off() is no longer used from
SoC-specific code.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-22 17:30:53 +10:00
Geert Uytterhoeven dcc09fd143 soc: renesas: rcar-sysc: Add DT support for SYSC PM domains
Populate the SYSC PM domains from DT, based on the presence of a device
node for the System Controller. The actual power area hiearchy, and
features of specific areas are obtained from tables in the C code.

The SYSCIER and SYSCIMR register values are derived from the power areas
present, which will help to get rid of the hardcoded values in R-Car H1
and R-Car Gen2 platform code later.

Initialization is done from an early_initcall(), to make sure the PM
Domains are initialized before secondary CPU bringup.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-22 17:30:37 +10:00
Geert Uytterhoeven 68667cebfc soc: renesas: rcar-sysc: Improve rcar_sysc_power() debug info
Print requested power domain state.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-22 17:23:31 +10:00
Geert Uytterhoeven be32bcbbd1 soc: renesas: Move pm-rcar to drivers/soc/renesas/rcar-sysc
Move the pm-rcar driver from arch/arm/mach-shmobile/ to
drivers/soc/renesas/, and its header file to include/linux/soc/renesas/,
so it can be shared between arm32 (R-Car H1 and Gen2) and arm64 (R-Car
Gen3). Rename it to rcar-sysc as it's really a driver for the R-Car
System Controller (SYSC).

Kill the intermediate PM_RCAR config symbol, as it's not user
configurable anymore, and to prepare for SoC-specific make rules.

Add the missing #include <linux/types.h> to rcar-sysc.h, which was
exposed by different include order.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-22 17:23:13 +10:00