This partially reverts the DMA API support that was recently merged
because it was causing performance regressions on older Tegra devices.
Unfortunately, the cache maintenance performed by dma_map_sg() and
dma_unmap_sg() causes performance to drop by a factor of 10.
The right solution for this would be to cache mappings for buffers per
consumer device, but that's a bit involved. Instead, we simply revert to
the old behaviour of sharing IOVA mappings when we know that devices can
do so (i.e. they share the same IOMMU domain).
Cc: <stable@vger.kernel.org> # v5.5
Reported-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Older Tegra devices only allow addressing 32 bits of memory, so whether
or not the host1x is attached to an IOMMU doesn't matter. host1x IOMMU
attachment is only needed on devices that can address memory beyond the
32-bit boundary and where the host1x doesn't support the wide GATHER
opcode that allows it to access buffers at higher addresses.
Cc: <stable@vger.kernel.org> # v5.5
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
It needed to be updated as well so it will show the proper values
if you reset to the defaults.
Bug: https://gitlab.freedesktop.org/drm/amd/issues/1020
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cull out 0 clocks to avoid a warning in DC.
Bug: https://gitlab.freedesktop.org/drm/amd/issues/963
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only send non-0 clocks to DC for validation. This mirrors
what the windows driver does.
Bug: https://gitlab.freedesktop.org/drm/amd/issues/963
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We might get different numbers of clocks from powerplay depending
on what the OEM has populated.
v2: add assert for at least one level
Bug: https://gitlab.freedesktop.org/drm/amd/issues/963
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ask the SMU for the default VDDC curve voltage values. This
properly reports the VDDC values in the OD interface.
v2: only update if the original values are 0
Bug: https://gitlab.freedesktop.org/drm/amd/issues/1020
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.5.x
Previously, the syfs functionality for restoring the default powerplay
table was sourcing it's information from the currently-staged powerplay
table.
This patch adds a step to cache the first overdrive table that we see on
boot, so that it can be used later to "restore" the powerplay table
v2: sqaush my original with Matt's fix
Bug: https://gitlab.freedesktop.org/drm/amd/issues/1020
Signed-off-by: Matt Coffin <mcoffin13@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.5.x
[Why]
When we disable a connector we don't explicitly remove it from the module so the
display is still cached(SW) in the hdcp_module.
SST: no issues because we can only have 1 display per link
MST: We have x displays per link, now if we disable 1 we don't remove it from the
module so the module has x display cached(SW).
If we try to enable HDCP, psp verification will fail because we are reporting x
displays while the HW only has x-1 display enabled
[How]
Check the callback for when we disable stream and call remove display.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Remove a backslash symbol accidentally left in increase bpp function
when computing mst dsc configuration.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Zhan Liu <zhan.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This workaround is needed only for Navi10 12 Gbps SKUs.
V2: added SMU firmware version guard
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The sdma_queue_count increment should be done before
execute_queues_cpsch(), which calls pm_calc_rlib_size() where
sdma_queue_count is used to calculate whether over_subscription is
triggered.
With the previous code, when a SDMA queue is created,
compute_queue_count in pm_calc_rlib_size() is one more than the
actual compute queue number, because the queue_count has been
incremented while sdma_queue_count has not. This patch fixes that.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In current code we're essentially drawing the cursor on every pipe
that contains it. This only works when the planes have the same
scaling for src to dest rect, otherwise we'll get "double cursor" where
one cursor is incorrectly filtered and offset from the real position.
[How]
Without dedicated cursor planes on DCN we require at least one pipe
that matches the scaling of the current timing.
This is an optimization and workaround for the most common case where
the top-most plane is not scaled but the bottom-most plane is scaled.
Whenever a pipe has a parent pipe in the blending tree whose recout
fully contains the current pipe we can disable the pipe.
This only applies when the pipe is actually visible of course.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----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=uiav
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-02-04' of git://anongit.freedesktop.org/drm/drm
Pull drm ttm/mm updates from Dave Airlie:
"Thomas Hellstrom has some more changes to the TTM layer that needed a
patch to the mm subsystem.
This adds a new mm API vmf_insert_mixed_prot to avoid an ugly hack
that has limitations in the TTM layer"
* tag 'drm-next-2020-02-04' of git://anongit.freedesktop.org/drm/drm:
mm, drm/ttm: Fix vm page protection handling
mm: Add a vmf_insert_mixed_prot() function
the normal collection of driver updates to support new SoCs, fix incorrect
data, and convert various drivers to clk_hw based APIs.
In the core, we allow clk_ops::init() to return an error code now so that we
can fail clk registration if the callback does something like fail to allocate
memory. We also add a new "terminate" clk_op so that things done in
clk_ops::init() can be undone, e.g. free memory. We also spit out a warning now
when critical clks fail to enable and we support changing clk rates and
enable/disable state through debugfs when developers compile the kernel
themselves.
On the driver front, we get support for what seems like a lot of Qualcomm and
NXP SoCs given that those vendors dominate the diffstat. There are a couple new
drivers for Xilinx and Amlogic SoCs too. The updates are all small things like
fixing the way glitch free muxes switch parents, avoiding div-by-zero problems,
or fixing data like parent names. See the updates section below for more
details.
Finally, the "basic" clk types have been converted to support specifying
parents with clk_hw pointers. This work includes an overhaul of the fixed-rate
clk type to be more modern by using clk_hw APIs.
Core:
- Let clk_ops::init() return an error code
- Add a clk_ops::terminate() callback to undo clk_ops::init()
- Warn about critical clks that fail to enable or prepare
- Support dangerous debugfs actions on clks with dead code
New Drivers:
- Support for Xilinx Versal platform clks
- Display clk controller on qcom sc7180
- Video clk controller on qcom sc7180
- Graphics clk controller on qcom sc7180
- CPU PLLs for qcom msm8916
- Move qcom msm8974 gfx3d clk to RPM control
- Display port clk support on qcom sdm845 SoCs
- Global clk controller on qcom ipq6018
- Add a driver for BCLK of Freescale SAI cores
- Add cam, vpe and sgx clock support for TI dra7
- Add aess clock support for TI omap5
- Enable clks for CPUfreq on Allwinner A64 SoCs
- Add Amlogic meson8b DDR clock controller
- Add input clocks to Amlogic meson8b controllers
- Add SPIBSC (SPI FLASH) clock on Renesas RZ/A2
- i.MX8MP clk driver support
Updates:
- Convert gpio, fixed-factor, mux, gate, divider basic clks to hw based APIs
- Detect more PRMCU variants in ux500 driver
- Adjust the composite clk type to new way of describing clk parents
- Fixes for clk controllers on qcom msm8998 SoCs
- Fix gmac main clock for TI dra7
- Move TI dra7-atl clock header to correct location
- Fix hidden node name dependency on TI clkctrl clocks
- Fix Amlogic meson8b mali clock update using the glitch free mux
- Fix Amlogic pll driver division by zero at init
- Prepare for split of Renesas R-Car H3 ES1.x and ES2.0+ config symbols
- Switch more i.MX clk drivers to clk_hw based APIs
- Disable non-functional divider between pll4_audio_div and
pll4_post_div on imx6q
- Fix watchdog2 clock name typo in imx7ulp clock driver
- Set CLK_GET_RATE_NOCACHE flag for DRAM related clocks on i.MX8M SoCs
- Suppress bind attrs for i.MX8M clock driver
- Add a big comment in imx8qxp-lpcg driver to tell why
devm_platform_ioremap_resource() shouldn't be used for the driver
- A correction on i.MX8MN usb1_ctrl parent clock setting
-----BEGIN PGP SIGNATURE-----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=UjXu
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"There are a few changes to the core framework this time around, in
addition to the normal collection of driver updates to support new
SoCs, fix incorrect data, and convert various drivers to clk_hw based
APIs.
In the core, we allow clk_ops::init() to return an error code now so
that we can fail clk registration if the callback does something like
fail to allocate memory. We also add a new "terminate" clk_op so that
things done in clk_ops::init() can be undone, e.g. free memory. We
also spit out a warning now when critical clks fail to enable and we
support changing clk rates and enable/disable state through debugfs
when developers compile the kernel themselves.
On the driver front, we get support for what seems like a lot of
Qualcomm and NXP SoCs given that those vendors dominate the diffstat.
There are a couple new drivers for Xilinx and Amlogic SoCs too. The
updates are all small things like fixing the way glitch free muxes
switch parents, avoiding div-by-zero problems, or fixing data like
parent names. See the updates section below for more details.
Finally, the "basic" clk types have been converted to support
specifying parents with clk_hw pointers. This work includes an
overhaul of the fixed-rate clk type to be more modern by using clk_hw
APIs.
Core:
- Let clk_ops::init() return an error code
- Add a clk_ops::terminate() callback to undo clk_ops::init()
- Warn about critical clks that fail to enable or prepare
- Support dangerous debugfs actions on clks with dead code
New Drivers:
- Support for Xilinx Versal platform clks
- Display clk controller on qcom sc7180
- Video clk controller on qcom sc7180
- Graphics clk controller on qcom sc7180
- CPU PLLs for qcom msm8916
- Move qcom msm8974 gfx3d clk to RPM control
- Display port clk support on qcom sdm845 SoCs
- Global clk controller on qcom ipq6018
- Add a driver for BCLK of Freescale SAI cores
- Add cam, vpe and sgx clock support for TI dra7
- Add aess clock support for TI omap5
- Enable clks for CPUfreq on Allwinner A64 SoCs
- Add Amlogic meson8b DDR clock controller
- Add input clocks to Amlogic meson8b controllers
- Add SPIBSC (SPI FLASH) clock on Renesas RZ/A2
- i.MX8MP clk driver support
Updates:
- Convert gpio, fixed-factor, mux, gate, divider basic clks to hw
based APIs
- Detect more PRMCU variants in ux500 driver
- Adjust the composite clk type to new way of describing clk parents
- Fixes for clk controllers on qcom msm8998 SoCs
- Fix gmac main clock for TI dra7
- Move TI dra7-atl clock header to correct location
- Fix hidden node name dependency on TI clkctrl clocks
- Fix Amlogic meson8b mali clock update using the glitch free mux
- Fix Amlogic pll driver division by zero at init
- Prepare for split of Renesas R-Car H3 ES1.x and ES2.0+ config
symbols
- Switch more i.MX clk drivers to clk_hw based APIs
- Disable non-functional divider between pll4_audio_div and
pll4_post_div on imx6q
- Fix watchdog2 clock name typo in imx7ulp clock driver
- Set CLK_GET_RATE_NOCACHE flag for DRAM related clocks on i.MX8M
SoCs
- Suppress bind attrs for i.MX8M clock driver
- Add a big comment in imx8qxp-lpcg driver to tell why
devm_platform_ioremap_resource() shouldn't be used for the driver
- A correction on i.MX8MN usb1_ctrl parent clock setting"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (140 commits)
dt/bindings: clk: fsl,plldig: Drop 'bindings' from schema id
clk: ls1028a: Fix warning on clamp() usage
clk: qoriq: add ls1088a hwaccel clocks support
clk: ls1028a: Add clock driver for Display output interface
dt/bindings: clk: Add YAML schemas for LS1028A Display Clock bindings
clk: fsl-sai: new driver
dt-bindings: clock: document the fsl-sai driver
clk: composite: add _register_composite_pdata() variants
clk: qcom: rpmh: Sort OF match table
dt-bindings: fix warnings in validation of qcom,gcc.yaml
dt-binding: fix compilation error of the example in qcom,gcc.yaml
clk: zynqmp: Add support for clock with CLK_DIVIDER_POWER_OF_TWO flag
clk: zynqmp: Fix divider calculation
clk: zynqmp: Add support for get max divider
clk: zynqmp: Warn user if clock user are more than allowed
clk: zynqmp: Extend driver for versal
dt-bindings: clock: Add bindings for versal clock driver
clk: ti: clkctrl: Fix hidden dependency to node name
clk: ti: add clkctrl data dra7 sgx
clk: ti: omap5: Add missing AESS clock
...
In old days, the "host-progs" syntax was used for specifying host
programs. It was renamed to the current "hostprogs-y" in 2004.
It is typically useful in scripts/Makefile because it allows Kbuild to
selectively compile host programs based on the kernel configuration.
This commit renames like follows:
always -> always-y
hostprogs-y -> hostprogs
So, scripts/Makefile will look like this:
always-$(CONFIG_BUILD_BIN2C) += ...
always-$(CONFIG_KALLSYMS) += ...
...
hostprogs := $(always-y) $(always-m)
I think this makes more sense because a host program is always a host
program, irrespective of the kernel configuration. We want to specify
which ones to compile by CONFIG options, so always-y will be handier.
The "always", "hostprogs-y", "hostprogs-m" will be kept for backward
compatibility for a while.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The OR routing logic in NVKM does not expect to receive supervisor
interrupts until the DD has provided consistent information on the
ORs it's using and the EVO/NVD assembly state to match.
The combination of changing window ownership + core channel update
during display init triggered a situation where we'd disconnect an
OR from the pad it was meant to still be driving on some systems.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
For various complicated reasons, we need to avoid sending a core update
method during display init. Something, which we've been required to do
on GV100 and up because we've been assigning windows to heads there and
the HW is rather picky about when that's allowed.
This moves window assignment into the modesetting path at a point where
it's much safer to send our first update methods to NVDisplay.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Userspace might tag a BO purgeable while it's still referenced by GPU
jobs. We need to make sure the shrinker does not purge such BOs until
all jobs referencing it are finished.
Fixes: 013b651013 ("drm/panfrost: Add madvise and shrinker support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191129135908.2439529-9-boris.brezillon@collabora.com
Commit fd67e9c6ed ("drm/tegra: Do not implement runtime PM") replaced
the generic runtime PM usage by a host1x bus-specific implementation in
order to work around some assumptions baked into runtime PM that are in
conflict with the requirements in the Tegra DRM driver.
Unfortunately the new runtime PM callbacks are not setup yet at the time
when the SOR driver first needs to resume the device to register the SOR
pad clock, and accesses to register will cause the system to hang.
Note that this only happens on Tegra124 and Tegra210 because those are
the only SoCs where the SOR pad clock is registered from the SOR driver.
Later generations use a SOR pad clock provided by the BPMP.
Fix this by moving the registration of the SOR pad clock after the
host1x client has been registered. That's somewhat suboptimal because
this could potentially, though it's very unlikely, cause the Tegra DRM
to be probed if the SOR happens to be the last subdevice to register,
only to be immediately removed again if the SOR pad output clock fails
to register. That's just a minor annoyance, though, and doesn't justify
implementing a workaround.
Fixes: fd67e9c6ed ("drm/tegra: Do not implement runtime PM")
Signed-off-by: Thierry Reding <treding@nvidia.com>
If the driver fails to probe, make sure to disable runtime PM again.
While at it, make the cleanup code in ->remove() symmetric.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Pull updates from Andrew Morton:
"Most of -mm and quite a number of other subsystems: hotfixes, scripts,
ocfs2, misc, lib, binfmt, init, reiserfs, exec, dma-mapping, kcov.
MM is fairly quiet this time. Holidays, I assume"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
kcov: ignore fault-inject and stacktrace
include/linux/io-mapping.h-mapping: use PHYS_PFN() macro in io_mapping_map_atomic_wc()
execve: warn if process starts with executable stack
reiserfs: prevent NULL pointer dereference in reiserfs_insert_item()
init/main.c: fix misleading "This architecture does not have kernel memory protection" message
init/main.c: fix quoted value handling in unknown_bootoption
init/main.c: remove unnecessary repair_env_string in do_initcall_level
init/main.c: log arguments and environment passed to init
fs/binfmt_elf.c: coredump: allow process with empty address space to coredump
fs/binfmt_elf.c: coredump: delete duplicated overflow check
fs/binfmt_elf.c: coredump: allocate core ELF header on stack
fs/binfmt_elf.c: make BAD_ADDR() unlikely
fs/binfmt_elf.c: better codegen around current->mm
fs/binfmt_elf.c: don't copy ELF header around
fs/binfmt_elf.c: fix ->start_code calculation
fs/binfmt_elf.c: smaller code generation around auxv vector fill
lib/find_bit.c: uninline helper _find_next_bit()
lib/find_bit.c: join _find_next_bit{_le}
uapi: rename ext2_swab() to swab() and share globally in swab.h
lib/scatterlist.c: adjust indentation in __sg_alloc_table
...
In order to provide a clearer, more symmetric API for pinning and
unpinning DMA pages. This way, pin_user_pages*() calls match up with
unpin_user_pages*() calls, and the API is a lot closer to being
self-explanatory.
Link: http://lkml.kernel.org/r/20200107224558.2362728-23-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert drm/via to use the new pin_user_pages_fast() call, which sets
FOLL_PIN. Setting FOLL_PIN is now required for code that requires
tracking of pinned pages, and therefore for any code that calls
put_user_page().
In partial anticipation of this work, the drm/via driver was already
calling put_user_page() instead of put_page(). Therefore, in order to
convert from the get_user_pages()/put_page() model, to the
pin_user_pages()/put_user_page() model, the only change required is to
change get_user_pages() to pin_user_pages().
Link: http://lkml.kernel.org/r/20200107224558.2362728-16-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Doesn't seem to be used, but add it just in case.
Reviewed-by: Matt Coffin <mcoffin13@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clang warns:
../drivers/gpu/drm/amd/amdgpu/gfx_v9_4.c:967:35: warning: implicit
conversion from enumeration type 'enum amdgpu_ras_block' to different
enumeration type 'enum ta_ras_block' [-Wenum-conversion]
block_info.block_id = info->head.block;
~ ~~~~~~~~~~~^~~~~
1 warning generated.
Use the function added in commit 828cfa2909 ("drm/amdgpu: Fix amdgpu
ras to ta enums conversion") that handles this conversion explicitly.
Fixes: 4c461d89db ("drm/amdgpu: add RAS support for the gfx block of Arcturus")
Link: https://github.com/ClangBuiltLinux/linux/issues/849
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is an oversight from
commit 42585395eb
Author: Peter Rosin <peda@axentia.se>
Date: Thu Jul 13 18:25:36 2017 +0200
drm: radeon: remove dead code and pointless local lut storage
v2: Also remove leftover local variable.
Cc: Peter Rosin <peda@axentia.se>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Need to do atomic check first, then validate global state.
If not, when connecting both MST and HDMI displays and
set a bad mode via xrandr, system will hang.
[How]
Move drm_dp_mst_atomic_check() to the front of
dc_validate_global_state().
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Per at least one tester this is enough magic to recover the regression
introduced for some people (but not all) in
commit b8e2b0199c
Author: Peter Rosin <peda@axentia.se>
Date: Tue Jul 4 12:36:57 2017 +0200
drm/fb-helper: factor out pseudo-palette
which for radeon had the side-effect of refactoring out a seemingly
redudant writing of the color palette.
10ms in a fairly slow modeset path feels like an acceptable form of
duct-tape, so maybe worth a shot and see what sticks.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Michel Dänzer <michel.daenzer@amd.com>
References: https://bugzilla.kernel.org/show_bug.cgi?id=198123
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a spelling mistake on the struct field name link_integiry_check,
fix this by renaming it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently we pre-allocate entities and fences for all the HW IPs on
context creation and some of which are might never be used.
This patch tries to resolve entity/fences wastage by creating entity
only when needed.
v2: allocate memory for entity and fences together
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In previous gfx9 parts, S_BARRIER shader instructions are implicitly
S_WAITCNT 0 instructions as well. This setting turns off that
mechanism in Arcturus and beyond. With this, shaders must follow the
ISA guide insofar as putting in explicit S_WAITCNT operations even
after an S_BARRIER.
v2: Fix patch title to list component
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
According to DP specification, DP_SINK_EVENT_NOTIFY is also a
broadcast message but as this function only handles
DP_CONNECTION_STATUS_NOTIFY I will only make the static
analyzer that caught this issue happy by not calling
drm_dp_get_mst_branch_device_by_guid() with a NULL guid, causing
drm_dp_mst_process_up_req() to return in the "if (!mstb)" right
bellow.
Fixes: 9408cc94eb ("drm/dp_mst: Handle UP requests asynchronously")
Cc: Lyude Paul <lyude@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Cc: <stable@vger.kernel.org> # v5.5+
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
[added cc to stable]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200129232448.84704-1-jose.souza@intel.com
uapi:
- dma-buf heaps added (and fixed)
- command line add support for panel oreientation
- command line allow overriding penguin count
drm:
- mipi dsi definition updates
- lockdep annotations for dma_resv
- remove dma-buf kmap/kunmap support
- constify fb_ops in all fbdev drivers
- MST fix for daisy chained hotplug-
- CTA-861-G modes with VIC >= 193 added
- fix drm_panel_of_backlight export
- LVDS decoder support
- more device based logging support
- scanline alighment for dumb buffers
- MST DSC helpers
scheduler:
- documentation fixes
- job distribution improvements
panel:
- Logic PD type 28 panel support
- Jimax8729d MIPI-DSI
- igenic JZ4770
- generic DSI devicetree bindings
- sony acx424AKP panel
- Leadtek LTK500HD1829
- xinpeng XPP055C272
- AUO B116XAK01
- GiantPlus GPM940B0
- BOE NV140FHM-N49
- Satoz SAT050AT40H12R2
- Sharp LS020B1DD01D panels.
ttm:
- use blocking WW lock
i915:
- hw/uapi state separation
- Lock annotation improvements
- selftest improvements
- ICL/TGL DSI VDSC support
- VBT parsing improvments
- Display refactoring
- DSI updates + fixes
- HDCP 2.2 for CFL
- CML PCI ID fixes
- GLK+ fbc fix
- PSR fixes
- GEN/GT refactor improvments
- DP MST fixes
- switch context id alloc to xarray
- workaround updates
- LMEM debugfs support
- tiled monitor fixes
- ICL+ clock gating programming removed
- DP MST disable sequence fixed
- LMEM discontiguous object maps
- prefaulting for discontiguous objects
- use LMEM for dumb buffers if possible
- add LMEM mmap support
amdgpu:
- enable sync object timelines for vulkan
- MST atomic routines
- enable MST DSC support
- add DMCUB display microengine support
- DC OEM i2c support
- Renoir DC fixes
- Initial HDCP 2.x support
- BACO support for Arcturus
- Use BACO for runtime PM power save
- gfxoff on navi10
- gfx10 golden updates and fixes
- DCN support on POWER
- GFXOFF for raven1 refresh
- MM engine idle handlers cleanup
- 10bpc EDP panel fixes
- renoir watermark fixes
- SR-IOV fixes
- Arcturus VCN fixes
- GDDR6 training fixes
- freesync fixes
- Pollock support
amdkfd:
- unify more codepath with amdgpu
- use KIQ to setup HIQ rather than MMIO
radeon:
- fix vma fault handler race
- PPC DMA fix
- register check fixes for r100/r200
nouveau:
- mmap_sem vs dma_resv fix
- rewrite the ACR secure boot code for Turing
- TU10x graphics engine support (TU11x pending)
- Page kind mapping for turing
- 10-bit LUT support
- GP10B Tegra fixes
- HD audio regression fix
hisilicon/hibmc:
- use generic fbdev code and helpers
rockchip:
- dsi/px30 support
virtio:
- fb damage support
- static some functions
vc4:
- use dma_resv lock wrappers
msm:
- use dma_resv lock wrappers
- sc7180 display + DSI support
- a618 support
- UBWC support improvements
vmwgfx:
- updates + new logging uapi
exynos:
- enable/disable callback cleanups
etnaviv:
- use dma_resv lock wrappers
atmel-hlcdc:
- clock fixes
mediatek:
- cmdq support
- non-smooth cursor fixes
- ctm property support
sun4i:
- suspend support
- A64 mipi dsi support
rcar-du:
- Color management module support
- LVDS encoder dual-link support
- R8A77980 support
analogic:
- add support for an6345
ast:
- atomic modeset support
- primary plane garbage fix
arcgpu:
- fixes for fourcc handling
tegra:
- minor fixes and improvments
mcde:
- vblank support
meson:
- OSD1 plane AFBC commit
gma500:
- add pageflip support
- reomve global drm_dev
komeda:
- tweak debugfs output
- d32 support
- runtime PM suppotr
udl:
- use generic shmem helpers
- cleanup and fixes
-----BEGIN PGP SIGNATURE-----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=oFrI
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Davbe Airlie:
"This is the main pull request for graphics for 5.6. Usual selection of
changes all over.
I've got one outstanding vmwgfx pull that touches mm so kept it
separate until after all of this lands. I'll try and get it to you
soon after this, but it might be early next week (nothing wrong with
code, just my schedule is messy)
This also hits a lot of fbdev drivers with some cleanups.
Other notables:
- vulkan timeline semaphore support added to syncobjs
- nouveau turing secureboot/graphics support
- Displayport MST display stream compression support
Detailed summary:
uapi:
- dma-buf heaps added (and fixed)
- command line add support for panel oreientation
- command line allow overriding penguin count
drm:
- mipi dsi definition updates
- lockdep annotations for dma_resv
- remove dma-buf kmap/kunmap support
- constify fb_ops in all fbdev drivers
- MST fix for daisy chained hotplug-
- CTA-861-G modes with VIC >= 193 added
- fix drm_panel_of_backlight export
- LVDS decoder support
- more device based logging support
- scanline alighment for dumb buffers
- MST DSC helpers
scheduler:
- documentation fixes
- job distribution improvements
panel:
- Logic PD type 28 panel support
- Jimax8729d MIPI-DSI
- igenic JZ4770
- generic DSI devicetree bindings
- sony acx424AKP panel
- Leadtek LTK500HD1829
- xinpeng XPP055C272
- AUO B116XAK01
- GiantPlus GPM940B0
- BOE NV140FHM-N49
- Satoz SAT050AT40H12R2
- Sharp LS020B1DD01D panels.
ttm:
- use blocking WW lock
i915:
- hw/uapi state separation
- Lock annotation improvements
- selftest improvements
- ICL/TGL DSI VDSC support
- VBT parsing improvments
- Display refactoring
- DSI updates + fixes
- HDCP 2.2 for CFL
- CML PCI ID fixes
- GLK+ fbc fix
- PSR fixes
- GEN/GT refactor improvments
- DP MST fixes
- switch context id alloc to xarray
- workaround updates
- LMEM debugfs support
- tiled monitor fixes
- ICL+ clock gating programming removed
- DP MST disable sequence fixed
- LMEM discontiguous object maps
- prefaulting for discontiguous objects
- use LMEM for dumb buffers if possible
- add LMEM mmap support
amdgpu:
- enable sync object timelines for vulkan
- MST atomic routines
- enable MST DSC support
- add DMCUB display microengine support
- DC OEM i2c support
- Renoir DC fixes
- Initial HDCP 2.x support
- BACO support for Arcturus
- Use BACO for runtime PM power save
- gfxoff on navi10
- gfx10 golden updates and fixes
- DCN support on POWER
- GFXOFF for raven1 refresh
- MM engine idle handlers cleanup
- 10bpc EDP panel fixes
- renoir watermark fixes
- SR-IOV fixes
- Arcturus VCN fixes
- GDDR6 training fixes
- freesync fixes
- Pollock support
amdkfd:
- unify more codepath with amdgpu
- use KIQ to setup HIQ rather than MMIO
radeon:
- fix vma fault handler race
- PPC DMA fix
- register check fixes for r100/r200
nouveau:
- mmap_sem vs dma_resv fix
- rewrite the ACR secure boot code for Turing
- TU10x graphics engine support (TU11x pending)
- Page kind mapping for turing
- 10-bit LUT support
- GP10B Tegra fixes
- HD audio regression fix
hisilicon/hibmc:
- use generic fbdev code and helpers
rockchip:
- dsi/px30 support
virtio:
- fb damage support
- static some functions
vc4:
- use dma_resv lock wrappers
msm:
- use dma_resv lock wrappers
- sc7180 display + DSI support
- a618 support
- UBWC support improvements
vmwgfx:
- updates + new logging uapi
exynos:
- enable/disable callback cleanups
etnaviv:
- use dma_resv lock wrappers
atmel-hlcdc:
- clock fixes
mediatek:
- cmdq support
- non-smooth cursor fixes
- ctm property support
sun4i:
- suspend support
- A64 mipi dsi support
rcar-du:
- Color management module support
- LVDS encoder dual-link support
- R8A77980 support
analogic:
- add support for an6345
ast:
- atomic modeset support
- primary plane garbage fix
arcgpu:
- fixes for fourcc handling
tegra:
- minor fixes and improvments
mcde:
- vblank support
meson:
- OSD1 plane AFBC commit
gma500:
- add pageflip support
- reomve global drm_dev
komeda:
- tweak debugfs output
- d32 support
- runtime PM suppotr
udl:
- use generic shmem helpers
- cleanup and fixes"
* tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm: (1998 commits)
drm/nouveau/fb/gp102-: allow module to load even when scrubber binary is missing
drm/nouveau/acr: return error when registering LSF if ACR not supported
drm/nouveau/disp/gv100-: not all channel types support reporting error codes
drm/nouveau/disp/nv50-: prevent oops when no channel method map provided
drm/nouveau: support synchronous pushbuf submission
drm/nouveau: signal pending fences when channel has been killed
drm/nouveau: reject attempts to submit to dead channels
drm/nouveau: zero vma pointer even if we only unreference it rather than free
drm/nouveau: Add HD-audio component notifier support
drm/nouveau: fix build error without CONFIG_IOMMU_API
drm/nouveau/kms/nv04: remove set but not used variable 'width'
drm/nouveau/kms/nv50: remove set but not unused variable 'nv_connector'
drm/nouveau/mmu: fix comptag memory leak
drm/nouveau/gr/gp10b: Use gp100_grctx and gp100_gr_zbc
drm/nouveau/pmu/gm20b,gp10b: Fix Falcon bootstrapping
drm/exynos: Rename Exynos to lowercase
drm/exynos: change callback names
drm/mst: Don't do atomic checks over disabled managers
drm/amdgpu: add the lost mutex_init back
drm/amd/display: skip opp blank or unblank if test pattern enabled
...
A couple of OOPS fixes, fixes for TU1xx if firmware isn't available,
better behaviour in the face of GPU faults, and a patch to make HD
audio work again after runpm changes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv4xcLF6Ahh7UYEesn-wBEksd2da+ghusBAdODMrH7Sz2A@mail.gmail.com
These are updates to device drivers and file systems that for some reason
or another were not included in the kernel in the previous y2038 series.
I've gone through all users of time_t again to make sure the kernel is
in a long-term maintainable state, replacing all remaining references
to time_t with safe alternatives.
Some related parts of the series were picked up into the nfsd, xfs,
alsa and v4l2 trees. A final set of patches in linux-mm removes the now
unused time_t/timeval/timespec types and helper functions after all five
branches are merged for linux-5.6, ensuring that no new users get merged.
As a result, linux-5.6, or my backport of the patches to 5.4 [1], should
be the first release that can serve as a base for a 32-bit system designed
to run beyond year 2038, with a few remaining caveats:
- All user space must be compiled with a 64-bit time_t, which will be
supported in the coming musl-1.2 and glibc-2.32 releases, along with
installed kernel headers from linux-5.6 or higher.
- Applications that use the system call interfaces directly need to be
ported to use the time64 syscalls added in linux-5.1 in place of the
existing system calls. This impacts most users of futex() and seccomp()
as well as programming languages that have their own runtime environment
not based on libc.
- Applications that use a private copy of kernel uapi header files or
their contents may need to update to the linux-5.6 version, in
particular for sound/asound.h, xfs/xfs_fs.h, linux/input.h,
linux/elfcore.h, linux/sockios.h, linux/timex.h and linux/can/bcm.h.
- A few remaining interfaces cannot be changed to pass a 64-bit time_t
in a compatible way, so they must be configured to use CLOCK_MONOTONIC
times or (with a y2106 problem) unsigned 32-bit timestamps. Most
importantly this impacts all users of 'struct input_event'.
- All y2038 problems that are present on 64-bit machines also apply to
32-bit machines. In particular this affects file systems with on-disk
timestamps using signed 32-bit seconds: ext4 with ext3-style small
inodes, ext2, xfs (to be fixed soon) and ufs.
Changes since v1 [2]:
- Add Acks I received
- Rebase to v5.5-rc1, dropping patches that got merged already
- Add NFS, XFS and the final three patches from another series
- Rewrite etnaviv patches
- Add one late revert to avoid an etnaviv regression
[1] https://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground.git/log/?h=y2038-endgame
[2] https://lore.kernel.org/lkml/20191108213257.3097633-1-arnd@arndb.de/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=wx0A
-----END PGP SIGNATURE-----
Merge tag 'y2038-drivers-for-v5.6-signed' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground
Pull y2038 updates from Arnd Bergmann:
"Core, driver and file system changes
These are updates to device drivers and file systems that for some
reason or another were not included in the kernel in the previous
y2038 series.
I've gone through all users of time_t again to make sure the kernel is
in a long-term maintainable state, replacing all remaining references
to time_t with safe alternatives.
Some related parts of the series were picked up into the nfsd, xfs,
alsa and v4l2 trees. A final set of patches in linux-mm removes the
now unused time_t/timeval/timespec types and helper functions after
all five branches are merged for linux-5.6, ensuring that no new users
get merged.
As a result, linux-5.6, or my backport of the patches to 5.4 [1],
should be the first release that can serve as a base for a 32-bit
system designed to run beyond year 2038, with a few remaining caveats:
- All user space must be compiled with a 64-bit time_t, which will be
supported in the coming musl-1.2 and glibc-2.32 releases, along
with installed kernel headers from linux-5.6 or higher.
- Applications that use the system call interfaces directly need to
be ported to use the time64 syscalls added in linux-5.1 in place of
the existing system calls. This impacts most users of futex() and
seccomp() as well as programming languages that have their own
runtime environment not based on libc.
- Applications that use a private copy of kernel uapi header files or
their contents may need to update to the linux-5.6 version, in
particular for sound/asound.h, xfs/xfs_fs.h, linux/input.h,
linux/elfcore.h, linux/sockios.h, linux/timex.h and
linux/can/bcm.h.
- A few remaining interfaces cannot be changed to pass a 64-bit
time_t in a compatible way, so they must be configured to use
CLOCK_MONOTONIC times or (with a y2106 problem) unsigned 32-bit
timestamps. Most importantly this impacts all users of 'struct
input_event'.
- All y2038 problems that are present on 64-bit machines also apply
to 32-bit machines. In particular this affects file systems with
on-disk timestamps using signed 32-bit seconds: ext4 with
ext3-style small inodes, ext2, xfs (to be fixed soon) and ufs"
[1] https://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground.git/log/?h=y2038-endgame
* tag 'y2038-drivers-for-v5.6-signed' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (21 commits)
Revert "drm/etnaviv: reject timeouts with tv_nsec >= NSEC_PER_SEC"
y2038: sh: remove timeval/timespec usage from headers
y2038: sparc: remove use of struct timex
y2038: rename itimerval to __kernel_old_itimerval
y2038: remove obsolete jiffies conversion functions
nfs: fscache: use timespec64 in inode auxdata
nfs: fix timstamp debug prints
nfs: use time64_t internally
sunrpc: convert to time64_t for expiry
drm/etnaviv: avoid deprecated timespec
drm/etnaviv: reject timeouts with tv_nsec >= NSEC_PER_SEC
drm/msm: avoid using 'timespec'
hfs/hfsplus: use 64-bit inode timestamps
hostfs: pass 64-bit timestamps to/from user space
packet: clarify timestamp overflow
tsacct: add 64-bit btime field
acct: stop using get_seconds()
um: ubd: use 64-bit time_t where possible
xtensa: ISS: avoid struct timeval
dlm: use SO_SNDTIMEO_NEW instead of SO_SNDTIMEO_OLD
...
Without relaxing this requirement, TU10x boards will fail to load without
an updated linux-firmware, and TU11x will completely fail to load because
FW isn't available yet.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This fixes an oops on TU11x GPUs where SEC2 attempts to register its falcon,
and triggers a NULL-pointer deref because ACR isn't yet supported.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The implementations for most channel types contains a map of methods to
priv registers in order to provide debugging info when a disp exception
has been raised.
This info is missing from the implementation of PIO channels as they're
rather simplistic already, however, if an exception is raised by one of
them, we'd end up triggering a NULL-pointer deref. Not ideal...
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206299
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This patch adds the support for the notification of HD-audio hotplug
via the already existing drm_audio_component framework. This allows
us more reliable hotplug notification and ELD transfer without
accessing HD-audio bus; it's more efficient, and more importantly, it
works without waking up the runtime PM.
The implementation is rather simplistic: nouveau driver provides the
get_eld ops for HD-audio, and it notifies the audio hotplug via
pin_eld_notify callback upon each nv50_audio_enable() and _disable()
call. As the HD-audio pin assignment seems corresponding to the CRTC,
the crtc->index number is passed directly as the zero-based port
number.
The bind and unbind callbacks handle the device-link so that it
assures the PM call order.
Link: https://lore.kernel.org/r/20190722143815.7339-3-tiwai@suse.de
Reviewed-by: Lyude Paul <lyude@redhat.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
There are several spelling mistakes in PP_ASSERT_WITH_CODE messages.
Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A for-loop is iterating from 0 up to 1000 however the loop variable count
is a u8 and hence not large enough. Fix this by making count an int.
Also remove the redundant initialization of count since this is never used
and add { } on the loop statement make the loop block clearer.
v2: drop useless else (Walter Harms)
Addresses-Coverity: ("Operands don't affect result")
Fixes: ed581a0ace ("drm/amd/display: wait for update when setting dpg test pattern")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allocation isn't required and can fail when resuming from suspend.
Bug: https://gitlab.freedesktop.org/drm/amd/issues/1009
Signed-off-by: Dor Askayo <dor.askayo@gmail.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Coreboot seems to have a problem correctly setting up access to the stolen VRAM
on KV/KB. Use the direct access only when necessary.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reported-and-tested-by: Fredrik Bruhn <fredrik.bruhn@unibap.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 80adaebd2d.
[WHY]
This change was working around a regression that occured in this:
commit 0301ccbaf6 ("drm/amd/display: DP Compliance 400.1.1 failure")
With the fix to run verify_link_cap when the SINK_COUNT of
dongles becomes non-zero this change is no longer needed.
Cc: Louis Li <Ching-shih.Li@amd.com>
Cc: Wenjing Liu <Wenjing.Liu@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Two years ago the patch referenced by the Fixes tag stopped running
dp_verify_link_cap_with_retries during DP detection when the reason
for the detection was a short-pulse interrupt. This effectively meant
that we were no longer doing the verify_link_cap training on active
dongles when their SINK_COUNT changed from 0 to 1.
A year ago this was partly remedied with:
commit 80adaebd2d ("drm/amd/display: Don't skip link training for empty dongle")
This made sure that we trained the dongle on initial hotplug (without
connected downstream devices).
This is all fine and dandy if it weren't for the fact that there are
some dongles on the market that don't like link training when SINK_COUNT
is 0 These dongles will in fact indicate a SINK_COUNT of 0 immediately
after hotplug, even when a downstream device is connected, and then
trigger a shortpulse interrupt indicating a SINK_COUNT change to 1.
In order to play nicely we will need our policy to not link train an
active DP dongle when SINK_COUNT is 0 but ensure we train it when the
SINK_COUNT changes to 1.
[HOW]
Call dp_verify_link_cap_with_retries on detection even when the detection
is triggered from a short pulse interrupt.
With this change we can also revert this commit which we'll do in a separate
follow-up change:
commit 80adaebd2d ("drm/amd/display: Don't skip link training for empty dongle")
Fixes: 0301ccbaf6 ("drm/amd/display: DP Compliance 400.1.1 failure")
Suggested-by: Louis Li <Ching-shih.Li@amd.com>
Tested-by: Louis Li <Ching-shih.Li@amd.com>
Cc: Wenjing Liu <Wenjing.Liu@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Switch to a blacklist so we can disable specific boards
that are problematic.
v2: make the blacklist non-raven specific.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a spelling mistake in a DRM_ERROR message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes coccicheck warning:
drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:723:2-50: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:733:3-52: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:747:3-51: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
expand sched_list definition for better understanding.
Also fix a typo atleast -> at least
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
bo_va_list is list_head, so initialize it.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use inst_idx relacing inst in SOC15_DPG_MODE macro to avoid confusion.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix typo error, should be inst_idx instead of inst.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix vcn2.5 instance issue, vcn0 and vcn1 have same register offset
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix a bug for the 2nd vcn instance at start and stop.
v2: squash in unused label removal.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Share vcn_v2_0_dec_ring_test_ring to vcn2.5 to support
vcn software ring.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The flush_type was incorrectly hard-coded to 0 when calling falling back
to MMIO-based invalidation in flush_gpu_tlb_pasid.
Fixes: ea930000a6 ("drm/amdgpu: export function to flush TLB via pasid")
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use a more meaningful variable name for the invalidation request
that is distinct from the tmp variable that gets overwritten when
acquiring the invalidation semaphore.
Fixes: 4ed8a03740 ("drm/amdgpu: invalidate mmhub semaphore workaround in gmc9/gmc10")
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- remove ioremap_nocache given that is is equivalent to
ioremap everywhere
-----BEGIN PGP SIGNATURE-----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=TUCJ
-----END PGP SIGNATURE-----
Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap
Pull ioremap updates from Christoph Hellwig:
"Remove the ioremap_nocache API (plus wrappers) that are always
identical to ioremap"
* tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap:
remove ioremap_nocache and devm_ioremap_nocache
MIPS: define ioremap_nocache to ioremap
This reverts commit 9db9c0cf58.
Setting mode_config.allow_fb_modifiers manually is completely
unnecessary. It is set automatically by drm_universal_plane_init() based
on the fact if modifier list is provided or not. Even more, it breaks
DE2 and DE3 as they don't support any modifiers beside linear. Modifiers
aware applications can be confused by provided empty modifier list - at
least linear modifier should be included, but it's not for DE2 and DE3.
Fixes: 9db9c0cf58 ("drm/sun4i: drv: Allow framebuffer modifiers in mode config")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200126065937.9564-1-jernej.skrabec@siol.net
Should work properly with the latest sbios on 5.5 and newer
kernels.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-panfrost: Fix mapping of globally visible BO's (Boris)
Cc: Wayne Lin <Wayne.Lin@amd.com>
CC: Boris Brezillon <boris.brezillon@collabora.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEHF6rntfJ3enn8gh8cywAJXLcr3kFAl4ov40ACgkQcywAJXLc
r3lceQgA0Oag+iEH5BPC2fkxtmv2VY0WA3fbyC3HHnLURdAODDFemCddqec9j4JQ
56A39V8jYZXcbX2d66Go9QHdCGjVH0a303+0H0OkV0ciY8XTjuRXkQHTnZ2SO3o8
7dQaLelHpbICLc5P4IQzgg5e94gFR3vRcs7lVMi5TlKRv5BN3B2kKFB4muSW28tM
aXzRl4fUaR2n3MO9ItiqgBh+4H3aqlbyRXwQ6flXXI7Cpme23HLjwuDmug3Vznau
oJUBVsyOmb2HBY+jtoCrsmiM1l7APZFZMguDd9Tmk4H+ZizEC5Zrdx4bkqlTlPWR
KwLP9xYp1HWpAuw8h4jwafy/px3cUA==
=mUse
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2020-01-22-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
-mst: Fix SST branch device handling (Wayne)
-panfrost: Fix mapping of globally visible BO's (Boris)
Cc: Wayne Lin <Wayne.Lin@amd.com>
CC: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20200122213725.GA22099@art_vandelay
Just a couple of fixes to GP10x ACR support after the work, and a
(fairly severe if you're running piglit a lot) memory leak fix.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv51mZaRuT5R=VhbKSTPzd15L4FbDiPQ+wsF+C23c_fOAQ@mail.gmail.com
- it changes enable and disable callback functions names of
struct exynos_drm_crtc_ops to atomic_enable and atomic_disable
for consistency.
Modify "EXYNOS" prefix to "Exynos"
- "Exynos" name is a regular trademarked name promoted by its
manufacturer, Samsung Electronics Co., Ltd.. This patch
corrects the name.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=tE0S
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Change Exynos DRM specific callback function names
- it changes enable and disable callback functions names of
struct exynos_drm_crtc_ops to atomic_enable and atomic_disable
for consistency.
Modify "EXYNOS" prefix to "Exynos"
- "Exynos" name is a regular trademarked name promoted by its
manufacturer, Samsung Electronics Co., Ltd.. This patch
corrects the name.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1579567970-4467-1-git-send-email-inki.dae@samsung.com
If CONFIG_IOMMU_API is n, build fails:
vers/gpu/drm/nouveau/nvkm/subdev/ltc/gp10b.c:37:9: error: implicit declaration of function dev_iommu_fwspec_get; did you mean iommu_fwspec_free? [-Werror=implicit-function-declaration]
spec = dev_iommu_fwspec_get(device->dev);
^~~~~~~~~~~~~~~~~~~~
iommu_fwspec_free
drivers/gpu/drm/nouveau/nvkm/subdev/ltc/gp10b.c:37:7: warning: assignment makes pointer from integer without a cast [-Wint-conversion]
spec = dev_iommu_fwspec_get(device->dev);
^
drivers/gpu/drm/nouveau/nvkm/subdev/ltc/gp10b.c:39:17: error: struct iommu_fwspec has no member named ids
u32 sid = spec->ids[0] & 0xffff;
Seletc IOMMU_API under config DRM_NOUVEAU to fix this.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
drivers/gpu/drm/nouveau/dispnv04/arb.c: In function nv04_calc_arb:
drivers/gpu/drm/nouveau/dispnv04/arb.c:56:21: warning:
variable width set but not used [-Wunused-but-set-variable]
'width' is never used, so remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
drivers/gpu/drm/nouveau/dispnv50/disp.c: In function nv50_pior_enable:
drivers/gpu/drm/nouveau/dispnv50/disp.c:1672:28: warning:
variable nv_connector set but not used [-Wunused-but-set-variable]
commit ac2d9275f3 ("drm/nouveau/kms/nv50-: Store the
bpc we're using in nv50_head_atom") left behind this.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
gp10b doesn't have all the registers that gp102_gr_zbc wants to access,
which causes IBUS MMIO faults to occur. Avoid this by using the gp100
variants of grctx and gr_zbc.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The low-level Falcon bootstrapping callbacks are expected to return 0 on
success or a negative error code on failure. However, the implementation
on Tegra returns the ID or mask of the Falcons that were bootstrapped on
success, thus breaking the calling code, which treats this as failure.
Fix this by making sure we only return 0 or a negative error code, just
like the code for discrete GPUs does.
Fixes: 86ce2a7153 ("drm/nouveau/flcn/cmdq: move command generation to subdevs")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
[why]
FMT has limitation to support YCbCr420 with h_active greater than 4096.
[how]
Use odm combine to overcome the limitation.
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Driver didn't init hw i2c speed cause hdcp hw cannot
send command, because the default value of speed register
is 0x2.
[How]
Restore the default speed when release i2c engine
Signed-off-by: Lewis Huang <Lewis.Huang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
MPO isn't enabled on some 4k videos due to video source width is 4096
and the current limit is 3840.
[How]
Changed the limit to 4096.
Signed-off-by: Isabel Zhang <isabel.zhang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
MSA will be deprecated in the future.
Need to support VSC during DP test automation.
[how]
Do not disable VSC during DP test automation.
TODO - need to add VSC update on DM side on test request.
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
CW2 may already be programmed when coming back from S4. In this case
we want to unconditionally replace whatever DMCUB version is currently
enabled with the latest.
[How]
Check the hw_init flag to know whether or not we've previously executed
the initliazed routine.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
These logically make sense more to be set after the DMCUB has been
reset rather than when we setup the inbox.
[How]
Move them into the reset callback.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DMCUB command table doesn't support ATOM_ENABLE/ATOM_DISABLE anymore
so we never end up calling the DCN init path in DMCUB.
[How]
Map ATOM_ENABLE to ATOM_INIT only for DMCUB command table offloading.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We'll need this to perform a clean shutdown before unloading the driver.
[How]
It will call reset internally and set hw_init to false. It won't do
anything if the hardware isn't initialized.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
determine_update_type_for_commit() uses pointers to single instance
of local variable to fill scaling/color info for all planes updates.
This is a bug, that leads to incorrect update type for commit in case
of multiple planes per crtc.
Each plane should refer to separate scaling/color data.
[How]
Use arrays for plane properties.
Bundle all properties into a single structure to simplify memory allocation.
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Hardcoded fixed values are not proper.
[How]
Use enum values instead of fixed numbers.
Signed-off-by: Brandon Syu <Brandon.Syu@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In HG mode, vbios didn't call DispController_Init to program NV1x
XTAL_REF_DIV value when ASIC_INIT, but driver read XTAL_REF_DIV
to calculate i2c reference frequency. it cause i2c frequency change
from 100kHz to 200kHz.
[How]
remove get_speed function and calculate reference frequency at
set_speed functiton.
Signed-off-by: Lewis Huang <Lewis.Huang@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
It has duplicate code for building regamma curve
[How]
Remove the duplicate code and use the same function for building regamma
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The types for dummyinteger1 and dummyinteger2 are unsigned
as part of the DML spec. They should not be long.
[How]
Make them unsigned int instead of long.
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For DMCUB enabled hardware DC has a dependency on DMCUB already being
running.
Command table offloading will fail on first modeset if DMCUB isn't
initialized first.
[How]
Perform DMCUB hardware initialization before DC.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Driver use pipe_ctx to reallocate payload may cause allocate
payload twice on same sink with split pipe.
[How]
Drvier must to check pipe_ctx is split pipe or not to avoid
reallocate payload twice on same sink.
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If the command table isn't available then we can fallback to DMCUB
offloading if it's enabled and available.
[How]
Instead of assigning NULL for supported command table functions we can
fallback to the DMCUB when it's available.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Under some hardware initialization sequences the fb base/fb offset
provided can be zero or hardwareinit can happen too late.
We want to ensure that we always have the correct fb_base/fb_offset
when performing DMCUB hardware initialization so we can do DMCUB
command table offloading during first dc hardware init.
[How]
Read from the DCN registers. VBIOS already filled these in for us.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[how]
Empty dsc enc caps when debug option is set to disable DSC.
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The DP 1.4a Spec requires that training pattern only under certain
specific conditions. Currently driver will re-send
training pattern every time voltage swing value changes,
but that should not be the case.
[How]
Do not re-send training pattern every time VS values
are different. Only send it on the first iteration.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Abdoulaye Berthe <Abdoulaye.Berthe@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
On video test pattern request we need to update MSA and VSC so
it will match the requested test pattern dynamic range field.
[how]
Update dynamic range field in MSA and disable VSC as updating VSC
info packet is complicated and not required for test pattern purpose.
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allocate fences for each entity and remove ctx->fences reference as
fences should be bound to amdgpu_ctx_entity instead amdgpu_ctx.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 9e44147862.
The patch will be replaced with a better solution, revert it.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
In GDDR6 BIST training, a certain mount of bottom VRAM will be encroached by
UMC, that causes problems(like GTT corrupted and page fault observed).
[how]
Saving the content of this bottom VRAM to system memory before training, and
restoring it after training to avoid VRAM corruption.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Better clean that up before some automation starts to complain about it
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement functions to do the RAS error injection and
query EDC counter.
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add reg headers to gc includes
v2: remove unused registers and fields in this patch set
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Add IP prefix for the IP related codes.
2. Refactor the code to clear EDC counter.
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To avoid calling RAS related functions when RAS feature isn't
supported in hardware. Change to check supported features, instead
of checking asic type.
v2: reuse amdgpu_ras_is_supported function, instead of introducing
a new flag for hardware ras feature.
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Compared with Vg20, the size of mmhub range is changed from 2 to 8.
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add mask & shift definition of MAM_D(0~3)MEM for all mmhub
ranges.
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reading CP_MEM_SLP_CNTL register with RREG32_SOC15 macro will lead to
hang when GPU is in "gfxoff" state.
I do a uniform substitution here.
Signed-off-by: chen gong <curry.gong@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reading some registers by mmio will result in hang when GPU is in
"gfxoff" state.This problem can be solved by GPU in "ring command
packages" way.
Signed-off-by: chen gong <curry.gong@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move amdgpu_virt_kiq_rreg/amdgpu_virt_kiq_wreg function to amdgpu_gfx.c,
and rename them to amdgpu_kiq_rreg/amdgpu_kiq_wreg.Make it generic and
flexible.
Signed-off-by: chen gong <curry.gong@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
PM4 packet size for flush message was oversized.
[How]
Packet size adjusted to allocate flush + fence packets.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With the introduction of per-FD address space, the same BO can be mapped
in different address space if the BO is globally visible (GEM_FLINK)
and opened in different context or if the dmabuf is self-imported. The
current implementation does not take case into account, and attaches the
mapping directly to the panfrost_gem_object.
Let's create a panfrost_gem_mapping struct and allow multiple mappings
per BO.
The mappings are refcounted which helps solve another problem where
mappings were torn down (GEM handle closed by userspace) while GPU
jobs accessing those BOs were still in-flight. Jobs now keep a
reference on the mappings they use.
v2 (robh):
- Minor review comment clean-ups from Steven
- Use list_is_singular helper
- Just WARN if we add a mapping when madvise state is not WILLNEED.
With that, drop the use of object_name_lock.
v3 (robh):
- Revert returning list iterator in panfrost_gem_mapping_get()
Fixes: a5efb4c9a5 ("drm/panfrost: Restructure the GEM object creation")
Fixes: 7282f7645d ("drm/panfrost: Implement per FD address spaces")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116021554.15090-1-robh@kernel.org
In our ABI we have defined I915_ENGINE_CLASS_INVALID_NONE and
I915_ENGINE_CLASS_INVALID_VIRTUAL as negative values which creates
implicit coupling with type widths used in, also ABI, struct
i915_engine_class_instance.
One place where we export engine->uabi_class
I915_ENGINE_CLASS_INVALID_VIRTUAL is from our our tracepoints. Because the
type of the former is u8 in contrast to u16 defined in the ABI, 254 will
be returned instead of 65534 which userspace would legitimately expect.
Another place is I915_CONTEXT_PARAM_ENGINES.
Therefore we need to align the type used to store engine ABI class and
instance.
v2:
* Update the commit message mentioning get_engines and cc stable.
(Chris)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 6d06779e86 ("drm/i915: Load balancing across a virtual engine")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org> # v5.3+
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116134508.25211-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 0b3bd0cdc3)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
If we create a rather large userptr object(e.g 1ULL << 32) we might
shift past the type-width of num_pages: (int)num_pages << PAGE_SHIFT,
resulting in a totally bogus sg_table, which fortunately will eventually
manifest as:
gen8_ppgtt_insert_huge:463 GEM_BUG_ON(iter->sg->length < page_size)
kernel BUG at drivers/gpu/drm/i915/gt/gen8_ppgtt.c:463!
v2: more unsigned long
prefer I915_GTT_PAGE_SIZE
Fixes: 5cc9ed4b9a ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200117132413.1170563-2-matthew.auld@intel.com
(cherry picked from commit 8e78871bc1)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Fix up inconsistent usage of upper and lowercase letters in "Exynos"
name.
"EXYNOS" is not an abbreviation but a regular trademarked name.
Therefore it should be written with lowercase letters starting with
capital letter.
The lowercase "Exynos" name is promoted by its manufacturer Samsung
Electronics Co., Ltd., in advertisement materials and on website.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch changes Exynos specific 'disable' and 'enable'
callback names to 'atomic_disable/enable' for the consistency.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
+ sc7180 display + DSI support
+ a618 (sc7180) support
+ more UBWC (bandwidth compression) support
+ various cleanups to handle devices that use vs don't
use zap fw, etc
+ usual random cleanups and fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CAF6AEGvv03ifuP0tp7-dmqZtr1iS=s8Vc=az8BNGtEoSMD-dkw@mail.gmail.com
core mst:
- serialize down messages and clear timeslots are on unplug
amdgpu:
- Update golden settings for renoir
- eDP fix
i915:
- uAPI fix: Remove dash and colon from PMU names to comply with tools/perf
- Fix for include file that was indirectly included
- Two fixes to make sure VMA are marked active for error capture
virtio:
- maintain obj reservation lock when submitting cmds
rockchip:
- increase link rate var size to accommodate rates
-----BEGIN PGP SIGNATURE-----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=Vwa3
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2020-01-19' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Back from LCA2020, fixes wasn't too busy last week, seems to have
quieten down appropriately, some amdgpu, i915, then a core mst fix and
one fix for virtio-gpu and one for rockchip:
core mst:
- serialize down messages and clear timeslots are on unplug
amdgpu:
- Update golden settings for renoir
- eDP fix
i915:
- uAPI fix: Remove dash and colon from PMU names to comply with
tools/perf
- Fix for include file that was indirectly included
- Two fixes to make sure VMA are marked active for error capture
virtio:
- maintain obj reservation lock when submitting cmds
rockchip:
- increase link rate var size to accommodate rates"
* tag 'drm-fixes-2020-01-19' of git://anongit.freedesktop.org/drm/drm:
drm/amd/display: Reorder detect_edp_sink_caps before link settings read.
drm/amdgpu: update goldensetting for renoir
drm/dp_mst: Have DP_Tx send one msg at a time
drm/dp_mst: clear time slots for ports invalid
drm/i915/pmu: Do not use colons or dashes in PMU names
drm/rockchip: fix integer type used for storing dp data rate
drm/i915/gt: Mark ring->vma as active while pinned
drm/i915/gt: Mark context->state vma as active while pinned
drm/i915/gt: Skip trying to unbind in restore_ggtt_mappings
drm/i915: Add missing include file <linux/math64.h>
drm/virtio: add missing virtio_gpu_array_lock_resv call
amd-drm-next-5.6-2020-01-17:
amdgpu:
- Fix 32 bit harder
- Powerplay cleanups
- VCN fixes for Arcturus
- RAS fixes
- eDP/DP fixes
- SR-IOV fixes
- Re-enable S/G display for PCO/RV2
- Free stolen memory after init on gmc10
- DF hashing optimizations for Arcturus
- Properly handle runtime pm in sysfs and debugfs
- Unify more GC programming between amdgpu and amdkfd
- Golden settings updates for gfx10
- GDDR6 training fixes
- Freesync fixes
- DSC fixes
- TMDS fixes
- Renoir USB-C fixes
- DC dml updates from hw team
- Pollock support
- Mutex init regresson fix
amdkfd:
- Unify more GC programming between amdgpu and amdkfd
- Use KIQ to setup HIQ rather than using MMIO
scheduler:
- Documentation fixes
- Improve job distribution with load sharing
drm:
- DP MST fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200117213625.4722-1-alexander.deucher@amd.com
rockchip: increase link rate var size to accommodate rates (Tobias)
mst: serialize down messages and clear timeslots are on unplug (Wayne)
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Tobias Schramm <t.schramm@manjaro.org>
Cc: Wayne Lin <Wayne.Lin@amd.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEHF6rntfJ3enn8gh8cywAJXLcr3kFAl4gjvAACgkQcywAJXLc
r3knlgf8C0szUNBmHkmwuAivHLJz6XHKCtGSfPrZ3M67KDwU563BRXlzHEA3/q7p
L3+RUW9CrohyMWA51fbmNJOR54mpy0zAu2ejLFll0Ntcw5CBbiYQ2ToBMmhW56h9
lM2EDkD0stx/JYmumpU6Vc8o0CG3asiJsU7IfQZ4n2kXqboyHho+E74qri52aPtD
ZZfXLmI9Yju8j0x0AjkZWxC6gfNWXH/HEnsC9X86JF+QXcnw5cVeHvi43doPjvs/
sZQCeaRAhseJXpAPaiBhVemF8+jkwX2CZ0sggxZZP9BB26PEwonqWHj9ixQlYLyD
bVC4Wson59D/0W1QK4R/AADpIO80IQ==
=iVHE
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2020-01-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
virtio: maintain obj reservation lock when submitting cmds (Gerd)
rockchip: increase link rate var size to accommodate rates (Tobias)
mst: serialize down messages and clear timeslots are on unplug (Wayne)
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Tobias Schramm <t.schramm@manjaro.org>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116162856.GA11524@art_vandelay
[Why]
While handling LINK_ADDRESS reply, current code expects a peer device
can handle sideband message once the peer device type is reported as
DP_PEER_DEVICE_MST_BRANCHING. However, when the connected device is
a SST branch case, it can't handle the sideband message(MST_CAP=0 in
DPCD 00021h).
Current code will try to send LINK_ADDRESS to SST branch device and end
up with message timeout and monitor can't display normally. As the
result of that, we should take SST branch device into account.
[How]
According to DP 1.4 spec, we can use Peer_Device_Type as
DP_PEER_DEVICE_MST_BRANCHING and Message_Capability_Status as 0 to
indicate peer device as a SST-only branch device.
Fix following:
- Add the function drm_dp_mst_is_dp_mst_end_device() to decide whether a
peer device connected to a DFP is mst end device. Which also indicates
if the peer device is capable of handling message or not.
- Take SST-only branch device case into account in
drm_dp_port_set_pdt() and add a new parameter 'new_mcs'. Take sst branch
device case as the same case as DP_PEER_DEVICE_DP_LEGACY_CONV and
DP_PEER_DEVICE_SST_SINK. All original handling logics remain.
- Take SST-only branch device case into account in
drm_dp_mst_port_add_connector().
- Fix some parts in drm_dp_mst_handle_link_address_port() to have SST
branch device case into consideration.
- Fix the arguments of drm_dp_port_set_pdt() in
drm_dp_mst_handle_conn_stat().
- Have SST branch device also report
connector_status_connected when the ddps is true
in drm_dp_mst_detect_port()
- Fix the arguments of drm_dp_port_set_pdt() in
drm_dp_delayed_destroy_port()
Changes since v1:(https://patchwork.kernel.org/patch/11323079/)
* Squash previous patch into one patch and merge the commit message here.
* Combine the if statements mentioned in comments
Fixes: c485e2c97d ("drm/dp_mst: Refactor pdt setup/teardown, add more locking")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200117060350.26358-2-Wayne.Lin@amd.com
Initialize notifier_lock.
Bug: https://gitlab.freedesktop.org/drm/amd/issues/1016
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
DPG is used to generate both blank and test automation test pattern.
When test automation is running the requested test pattern can be
overriden by the blank or unblank call because it is using the same
hardware.
[how]
When test pattern is requested, skip blank or unblank.
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Try to allocate MST payload but receive HPD short pulse with link loss
casue driver allocate payload twice. It cause monitor can't light up
successfully.
[How]
When driver receive HPD short pulse with link loss, we need to
deallocate payload then allocate payload.
Then we will not allocate payload twice with same sink.
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Need to fix DML portability issues to enable SW unit testing around DML
[how]
Move calcs into dc include folder since multiple components reference it
Remove relative paths to external dependencies
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The rapid msleep operation causes the white line garbage when
DAL check flip pending status in SetVidPnSourceVisibility.
To execute this msleep will induce context switch, and longer
delay could cause worse garbage situation.
[how]
To replace msleep with mdelay.
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only need to do surface flip for video plane via dmcub.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently if seamless boot is enabled, we will skip double buffer enable
for OTG_BLANK. However, we need the double buffer enable in order to
block global sync signals when OTG becomes blanked (for PSR). Blocking
global sync signals prevent pipe from requesting data.
[How]
Move tg_init before seamless boot check.
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dpcd cap mismatch in 2200 vs base
[How]
Add monitor patch which using based caps to overwrite 2200
Signed-off-by: Lewis Huang <Lewis.Huang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Currently we wait for test pattern after each pipe is programmed. For
ODM combined scenario it will cause test pattern is shown on only half
screen for 1 frame. This is not desirable.
[how]
No wait between odm pipe programming, only wait after all pipes are
programmed.
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
With different refresh rate panels, the PSR entry/exit time is
different since it is dependent on 2 frame entry time today
[How]
Make static screen num frame entry time to be calculated
such that entry time is within 30 ms instead of fixed num
frames.
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DMCU need to wait a vblank to handle psr enter command. When psr exit
coming before vblank, the psr exit command will be skip because current
psr state is disable.
[How]
remove psr state condition when psr exit case
Signed-off-by: Lewis Huang <Lewis.Huang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
IRAM definition needed for versions of DMCU containing ABM 2.4
[How]
Pass ABM 2.3 IRAM definition, which is compatible with ABM 2.4, to DMCU
when ABM 2.4 FW is detected
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Reviewed-by: Jordan Lazare <Jordan.Lazare@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DML Initialization was previously done on dcn21_resource initialization.
This meant that DML soc struct was populated with hardcoded values.
[How]
Move DML initialization to after updating bounding box, to use clock table
values from SMU.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
PHY will sometimes be in bad state on hotplugging display from USB-C
dongle.
[How]
Add additional calls to disable and then enable PHY before link training
starts during verify_link_cap.
Signed-off-by: George Shen <george.shen@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The DMUB PSR command IDs do not have the correct values.
[How]
Fix the command IDs and cleanup the formatting.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rework surface programming for RN to separate preparing parameters and
register programming.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Recent double buffering changes for dcn2 use IX_REG_READ.
However, this macro returns the full register value, with the need to
manually shift and mask it to retrieve field data.
[How]
Create new IX_REG_GET macro that handles shift and mask.
Use this for double buffering reads instead of IX_REG_READ.
Signed-off-by: Noah Abradjian <noah.abradjian@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Moving PSR from DMCU to DMCUB.
[How]
Cleanup psr spec files and add PSR hw programming files.
No functionality is included in this change.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Programming surface flip addresses via dmcub uC for optimizing the data
flush.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When rapidly adjusting color temperature, screen tearing was observed.
This was due to overwritten values in gamut remap registers.
This issue was solved for OCSC and ICSC by alternating between "A" and
"B" registers to double buffer the writes.
[How]
Create new set_gamut_remap and program_gamut_remap for dcn20.
Alternate which registers are written to by switching modes each time.
Also fixes ICSC mode reg read to use proper data offset.
Signed-off-by: Noah Abradjian <noah.abradjian@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Moving PSR from DMCU to DMCUB.
[How]
Add driverside PSR changes required to send inbox messages to fw.
These changes are non-functional until the psr structure allocation
is uncommented.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When rapidly adjusting video brightness, screen tearing was observed.
This was due to overwritten values in ICSC registers. In dcn10, this issue had been
fixed by implementing double buffering via alternating ICSC modes.
However, the second register set used in dcn1 doesn't exist in dcn2.
[How]
Create new program_input_csc for dcn20.
Use ICSC_B registers instead of COMA registers as second set.
Signed-off-by: Noah Abradjian <noah.abradjian@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add more fields to support upcoming dml versions
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Don't want to start HW discovery unless we have lost power,
as doing rediscovery otherwise is both unnecessary and time consuming.
Before this change it takes 40 seconds to go in to suspend, after it
takes 27 seconds
[How]
Accelerated mode gets cleared if we lose power. Only do detection if
this register is cleared
Signed-off-by: Joseph Gravenor <joseph.gravenor@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Test pattern should be applied to hardware when exiting set test pattern
function.
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
48mhz turn off feature does not work on HDMI and DVI, but the feauture
was only blocked on HDMI, this change will apply the same wa on DVI
[HOW]
Apply workaround for all TMDS signal types (HDMI, DVI single/dual link)
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If dummy pstate latency is 0 we should report the actual
pstate support, and not that pstate is always supported.
[How]
Don't always program pstate support true
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make sure that lttpr_caps has the mode set to repeater.
Signed-off-by: abdoulaye berthe <abdoulaye.berthe@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When rapidly adjusting colour properties (e.g. brightness), screen tearing was observed.
This was due to overwritten values in OCSC registers. In dcn10, this issue had been fixed by
implementing double buffering by alternating OCSC modes.
[How]
Alternate which OCSC registers are used by switching modes each time.
This double buffers the CSC writes.
Signed-off-by: Noah Abradjian <noah.abradjian@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We need to ensure that the DMUIF in MMHUBBUB is also in reset so we
aren't generating requests while the DMCUB is in reset.
[How]
Set DMUIF_SOFT_RESET=1 on reset and DMUIF_SOFT_RESET=0 on reset
release.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The inst firmware isn't necessarily fully flushed to framebuffer
memory and the DMCUB can hang due to invalid inst being parsed.
[How]
Like the fix to flush ringbuffer commands before updating the inbox
write pointer we need to read back inst memory before writing the
CW0 registers.
Add a helper to read 64-byte chunks to avoid a large temporary buffer.
Read the remaining leftover bytes if the inst_fb isn't fully aligned.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There's a data race that can occur between when we update the
inbox write pointer vs when the memory for the command actually gets
flushed from the map to the framebuffer.
DMCUB can read stale or partially invalid data when this race occurs.
[How]
Before updating the write pointer we can read back all pending commands
to ensure that we stall for the writes to be flushed to framebuffer.
We don't need to worry about choosing HDP vs VM flush with this
mechanism.
Drop the dmub_srv_cmd_submit() while we're updating this to work
correctly since nothing was actually using this API and the caller
should be explicit about the API flow here - by doing this on execute
we can give some extra time for the flush to finish while
preparing other commands.
We should try to avoid writing single commands
because of this overhead.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
While doing seamless boot I made some changes
to dcn2 hubbub functions, missed a link
[how]
link hubbub1 func to hubbub2 usage. It has already
been successfully linked in dcn1 and 3.
Signed-off-by: Martin Leung <martin.leung@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
If the specific monitor supports DSC, the secondary link should be
disabled, and the other way around, too: if either that monitor or
our ASIC doesn't support DSC, the secodary link should be enabled.
[how]
Add a monitor patch and disable secondary link if that monitor
is detected and if ASIC supports DSC, or otherwise enable secondary
link.
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Needed to reprogram vblank_start in dml properly in order to get the
correct dlg params to program VTG.
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Previous implementation we may have residual chroma address offset
if transition from wa enable -> wa disable.
[How]
Clear address offset cache when viewport updates. Also update the
vp size check condition to account for rotation angle
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Upon exiting a fixed active VRR state, the state isn't cleared. This
leads to the variable VRR range to be calculated incorrectly.
[how]
Set fixed active state to false when updating vrr params
Signed-off-by: Amanda Liu <amanda.liu@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add registers for handling Post Gamma Color Blending (OCSC), which is
useful for conversion from RGB->YUV for HDMI.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This also replaces old artifacts with a correct one in drm_sched_entity_init()
declaration
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
support check if dirver should try gpu recovery for
arcturus
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To allow the flexibilty for user to disable gpu recovery
in RAS recovery path by module parameter amdgpu_gpu_recovery
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The mec ucode will set the CP_HQD_ACTIVE bit while the queue is mapped by
MAP_QUEUES packet. So we only need set cp active field for kiq queue.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SW scheduler is previously called non HW scheduler, or non HWS. This
message is useful when triaging issues from dmesg.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch uses score based logic to select a new rq for better
loadbalance between multiple rq/scheds instead of num_jobs.
Below are test results after running amdgpu_test from mesa drm
Before this patch:
sched_name num of many times it got scheduled
========= ==================================
sdma0 314
sdma1 32
comp_1.0.0 56
comp_1.0.1 0
comp_1.1.0 0
comp_1.1.1 0
comp_1.2.0 0
comp_1.2.1 0
comp_1.3.0 0
comp_1.3.1 0
After this patch:
sched_name num of many times it got scheduled
========= ==================================
sdma0 216
sdma1 185
comp_1.0.0 39
comp_1.0.1 9
comp_1.1.0 12
comp_1.1.1 0
comp_1.2.0 12
comp_1.2.1 0
comp_1.3.0 12
comp_1.3.1 0
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement indirect DPG SRAM mode for vcn2.5
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add dpg pause mode support for vcn2.5
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add DPG mode start and stop functions for vcn2.5
v2: Correct firmware ucode index in vcn_v2_5_mc_resume_dpg_mode
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move macro from vcn2.0 to amdgpu_vcn to share with vcn2.5
v2: squash in macro fix
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add multiple instance direct SRAM read and write support for vcn2.5
v2: squash in indexing fix
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add multiple-instance dpg pause mode support for VCN2.5
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There's no need to dump ACTIVITY_MONITOR_COEFF under VF.
Therefore, Skip the update of SMU_TABLE_ACTIVITY_MONITOR_COEFF
under SRIOV VF.
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
In dual GPUs scenario, stolen_size is assigned to zero on the secondary GPU,
since there is no pre-OS console using that memory. Then the bottom region of
VRAM was allocated as GTT, unfortunately a small region of bottom VRAM was
encroached by UMC firmware during GDDR6 BIST training, this cause page fault.
[how]
Forcing stolen_size to 3MB, then the bottom region of VRAM was
allocated as stolen memory, GTT corruption avoid.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In SRIOV, rlc_g firmware is loaded by host, guest driver won't load it which will
cause the rlc_fw pointer is null
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Entirely unused.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Disabled HW IP's entity initialized with NULL rq. We should not
process any submit request from userspace for a disabled HW IP.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To align with gfx v9, we use the map_queues packet to load hiq MQD.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is an issue that CP will check the HIQ queue to be configured and mapped
with KIQ ring, otherwise, it will be unable to read back the secure buffer while
the gfxoff is enabled even with trusted IP blocks.
v1 -> v2:
- Fix to remove surplus set_resources packets.
- Fill the whole configuration in MQD.
- Change the author as Aaron because he addressed the key point of this issue.
- Add kiq ring lock.
v2 -> v3:
- Free the lock while in error return case.
- Remove the programming only needed by the queue is unmapped.
v3 -> v4:
- Remove doorbell programming because it's used for restarting queue.
- Remove CP scheduler programming because map_queue packet will handle this.
v4 -> v5:
- Remove cp_hqd_active because mec ucode will enable it while use map_queues.
- Revise goto out_unlock.
- Correct the right doorbell offset for HIQ that kfd driver assigned in the
packet.
v5 -> v6:
- Merge Arcturus fix into this patch because it will get oops in Arcturus
platform.
Reported-by: Lisa Saturday <Lisa.Saturday@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-and-Tested-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
kfd2kgd interface will be deprecated. This removal only covers TLB
invalidation for now. They have been replaced in amdgpu_amdkfd API.
[How]
TLB invalidate functions removed from the different amdkfd_gfx_v*
versions.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
TLB flush method has been deprecated using kfd2kgd interface.
This implementation is now on the amdgpu_amdkfd API.
[How]
TLB flush functions now implemented in amdgpu_amdkfd.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This can be used directly from amdgpu and amdkfd to invalidate
TLB through pasid.
It supports gmc v7, v8, v9 and v10.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There are HW-indpendent functions that enables and disables kcq. These functions use
the kiq_pm4_funcs implementation.
[How]
Local kcq enable and disable functions removed and replace it by the generic kcq
enable under amdgpu_gfx
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
tlbs invalidate pointer function added to kiq_pm4_funcs struct.
This way, tlb flush can be done through kiq member.
TLBs invalidatation implemented for gfx9 and gfx10.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Functions implemented from kiq_pm4_funcs struct members
for gfx_v9 version.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Avoid reclaim filesystem while eviction lock is held called from
MMU notifier.
[How]
Setting PF_MEMALLOC_NOFS flags while eviction mutex is locked.
Using memalloc_nofs_save / memalloc_nofs_restore API.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
TTM graphics buffer objects may, transparently to user-space, move
between IO and system memory. When that happens, all PTEs pointing to the
old location are zapped before the move and then faulted in again if
needed. When that happens, the page protection caching mode- and
encryption bits may change and be different from those of
struct vm_area_struct::vm_page_prot.
We were using an ugly hack to set the page protection correctly.
Fix that and instead export and use vmf_insert_mixed_prot() or use
vmf_insert_pfn_prot().
Also get the default page protection from
struct vm_area_struct::vm_page_prot rather than using vm_get_page_prot().
This way we catch modifications done by the vm system for drivers that
want write-notification.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
read_current_link_settings_on_detect() on eDP 1.4+ may use the
edp_supported_link_rates table which is set up by
detect_edp_sink_caps(), so that function needs to be called first.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Martin Leung <martin.leung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Update mmSDMA0_UTCL1_WATERMK golden setting for renoir.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Noticed this while testing MST with the 4 ports MST hub from
StarTech.com. Sometimes can't light up monitors normally and get the
error message as 'sideband msg build failed'.
Look into aux transactions, found out that source sometimes will send
out another down request before receiving the down reply of the
previous down request. On the other hand, in drm_dp_get_one_sb_msg(),
current code doesn't handle the interleaved replies case. Hence, source
can't build up message completely and can't light up monitors.
[How]
For good compatibility, enforce source to send out one down request at a
time. Add a flag, is_waiting_for_dwn_reply, to determine if the source
can send out a down request immediately or not.
- Check the flag before calling process_single_down_tx_qlock to send out
a msg
- Set the flag when successfully send out a down request
- Clear the flag when successfully build up a down reply
- Clear the flag when find erros during sending out a down request
- Clear the flag when find errors during building up a down reply
- Clear the flag when timeout occurs during waiting for a down reply
- Use drm_dp_mst_kick_tx() to try to send another down request in queue
at the end of drm_dp_mst_wait_tx_reply() (attempt to send out messages
in queue when errors occur)
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200113093649.11755-1-Wayne.Lin@amd.com
For shared, and read-only private mappings of graphics memory, use
VM_PFNMAP instead of VM_MIXEDMAP. This means less accounting overhead
when inserting and removing page-table entries. TTM doesn't do this
by default, since there was a performance problem with book-keeping of
write-combined mappings. Since vmwgfx solely uses cached mappings, that's
not a problem and now that the TTM vm has largely been turned into
helpers, we can use VM_PFNMAP on a per-driver basis
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Bump driver minor version to signal availability of the host messaging
ioctl.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Up to now, guest userspace does logging directly to host using essentially
the same rather complex port assembly stuff as the kernel.
We'd rather use the same mechanism than duplicate it (it may also change in
the future), hence add a new ioctl for relaying guest/host messaging
(logging is just one application of it).
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
In vmw_cmdbuf_res_add if drm_ht_insert_item fails the allocated memory
for cres should be released.
Fixes: 18e4a4669c ("drm/vmwgfx: Fix compat shader namespace")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
With earlier commit 9c84aeba67 ("drm/vmwgfx: Kill unneeded legacy
security features") we removed the no longer applicable validation, as
we now have isolation of primary clients from different master realms.
As of last commit, we're explicitly checking for authentication in the
only render ioctls which care about one.
With those in place, the DRM_AUTH token serves no real purpose. Let's
drop it.
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
With later commit we'll rework DRM authentication handling. Namely
DRM_AUTH will not be a requirement for DRM_RENDER_ALLOW ioctls.
Since vmwgfx does isolation for primary clients in different master
realms, the DRM_AUTH can be dropped.
The only place where authentication matters, is surface_reference ioctls
whenever a legacy (non-prime) handle is used. For those ioctls we call
vmw_surface_handle_reference(), where we explicitly check if the client
is both a) master and b) unauthenticated - bailing out as result.
Otherwise the usual isolation path kicks in and we're all good.
v2: Reword commit message, since the isolation work has landed.
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Move the render_client hunk for require_exist alongside the rest.
Keeping all the reasons why an existing object is needed, in a single
place makes it easier to follow.
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Commit 508108ea27 ("drm/vmwgfx: Don't refcount command-buffer managed
resource lookups during command buffer validation") slips in use of
deprecated PTR_RET. Use PTR_ERR_OR_ZERO instead.
As the PTR_ERR_OR_ZERO is a bit longer than PTR_RET, we introduce
local variable ret for proper indentation and line-length limits.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
The load/unload callbacks in struct drm_driver are deprecated. Remove
them and call functions explicitly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
With memory encryption active, the hypervisor typically can't read the
guest memory using the HB port, since it is encrypted using a key known
only to the guest. In that case fall back to processing 4 bytes at a time
using the ordinary backdoor port.
The other option would be to use unencrypted bounce buffers for the
hypervisor to read out from or write into, but given the limited message
sizes it appears more efficient to just fall back to the ordinary backdoor
port.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Final drm/i915 features for v5.6:
- DP MST fixes (José)
- Fix intel_bw_state memory leak (Pankaj Bharadiya)
- Switch context id allocation to xarray (Tvrtko)
- ICL/EHL/TGL workarounds (Matt Roper, Tvrtko)
- Debugfs for LMEM details (Lukasz Fiedorowicz)
- Prefer platform acronyms over codenames in symbols (Lucas)
- Tiled and port sync mode fixes for fbdev and DP (Manasi)
- DSI panel and backlight enable GPIO fixes (Hans de Goede)
- Relax audio min CDCLK requirements on non-GLK (Kai Vehmanen)
- Plane alignment and dimension check fixes (Imre)
- Fix state checks for PSR (José)
- Remove ICL+ clock gating programming (José)
- Static checker fixes around bool usage (Ma Feng)
- Bring back tests for self-contained headers in i915 (Masahiro Yamada)
- Fix DP MST disable sequence (Ville)
- Start converting i915 to the new drm device based logging macros (Wambui Karuga)
- Add DSI VBT I2C sequence execution (Vivek Kasireddy)
- Start using function pointers and ops structs in uc code (Michal)
- Fix PMU names to not use colons or dashes (Tvrtko)
- TGL media decompression support (DK, Imre)
- Split i915_gem_gtt.[ch] to more manageable chunks (Matthew Auld)
- Create dumb buffers in LMEM where available (Ram)
- Extend mmap support for LMEM (Abdiel)
- Selftest updates (Chris)
- Hack bump up CDCLK on TGL to avoid underruns (Stan)
- Use intel_encoder and intel_connector more instead of drm counterparts (Ville)
- Build error fixes (Zhang Xiaoxu)
- Fixes related to GPU and engine initialization/resume (Chris)
- Support for prefaulting discontiguous objects (Abdiel)
- Support discontiguous LMEM object maps (Chris)
- Various GEM and GT improvements and fixes (Chris)
- Merge pinctrl dependencies branch for the DSI GPIO updates (Jani)
- Backmerge drm-next for new logging macros (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87sgkil0v9.fsf@intel.com
- Rewrite of the ACR (formerly "secure boot") code, both to support
Turing, support multiple FW revisions, and to make life easier when
having to debug HW/FW bring-up in the future
- Support for TU10x graphics engine, TU11x not available yet as FW isn't ready
- Proper page 'kind' mappings for Turing
- 10-bit LUT support
- GP10B (Tegra) fixes
- Misc other fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv5GKasg9-hEUwp9+aHVJg+nbQ0LukXyudgj6=YKu96jWQ@mail.gmail.com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=BXQH
-----END PGP SIGNATURE-----
Merge tag 'mediatek-drm-next-5.6' of https://github.com/ckhu-mediatek/linux.git-tags into drm-next
Mediatek DRM Next for Linux 5.6
This fix non-smooth cursor problem, add cmdq support, add ctm property
support and some refinement.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1578972526.14594.8.camel@mtksdaap41
This contains a small set of mostly fixes and some minor improvements.
-----BEGIN PGP SIGNATURE-----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=OBEv
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-5.6-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v5.6-rc1
This contains a small set of mostly fixes and some minor improvements.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200111004835.2412858-1-thierry.reding@gmail.com
ACR is responsible for managing the firmware for LS (Low Secure) falcons,
this was previously handled in the driver by SECBOOT.
This rewrite started from some test code that attempted to replicate the
procedure RM uses in order to debug early Turing ACR firmwares that were
provided by NVIDIA for development.
Compared with SECBOOT, the code is structured into more individual steps,
with the aim of making the process easier to follow/debug, whilst making
it possible to support newer firmware versions that may have a different
binary format or API interface.
The HS (High Secure) binary(s) are now booted earlier in device init, to
match the behaviour of RM, whereas SECBOOT would delay this until we try
to boot the first LS falcon.
There's also additional debugging features available, with the intention
of making it easier to solve issues during FW/HW bring-up in the future.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We perform memory allocations long before we hit the code in SECBOOT that
would unlock the VPR, which could potentially result in memory allocation
within the locked region.
Run the scrubber binary right after VRAM init to ensure we don't.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
When the PMU/SEC2 LS FWs have booted, they'll send a message to the host
with various information, including the configuration of message/command
queues that are available.
Move the handling for this to the relevant subdevs.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This moves the code to generate commands for the ACR unit of the PMU/SEC2 LS
firmwares to those subdevs.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Takes the command queue pointer directly instead of requiring a function to
lookup based on an queue type, as well as an explicit timeout value.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Thierry Reding
Lyude Paul
Alex Deucher
Matt Coffin
Bhawanpreet Lakha
Mikita Lipski
Evan Quan
Yong Zhao
Nicholas Kazlauskas
Linus Torvalds
Masahiro Yamada
Ben Skeggs
Boris Brezillon
John Hubbard
Dave Airlie
Nathan Chancellor
Daniel Vetter
Zhan Liu
Colin Ian King
Stephen Rothwell
Nirmoy Das
Joseph Greathouse
José Roberto de Souza
Takashi Iwai
Arnd Bergmann
Dor Askayo
Christian König
Harry Wentland
zhengbin
xinhui pan
James Zhu
Felix Kuehling
Jernej Skrabec
Chen Zhou
YueHaibing
Wenjing Liu
Lewis Huang
Isabel Zhang
Roman Li
Brandon Syu
Aric Cyr
Anthony Koo
Jerry (Fangzhi) Zuo
Haiyi Zhou
Paul Hsieh
Sung Lee
Tianci.Yin
Dennis Li
chen gong
John Clements
Alex Sierra
Sean Paul
Tvrtko Ursulin
Matthew Auld
Krzysztof Kozlowski
Inki Dae
Wayne Lin
Jun Lei
Martin Tsai
Yongqiang Sun
Alvin Lee
Josip Pavic
Chris Park
Charlene Liu
George Shen
Wyatt Wood
Noah Abradjian
Dmytro Laktyushkin
Joseph Gravenor
Michael Strauss
abdoulaye berthe
Martin Leung
Nikola Cornij
Eric Yang
Amanda Liu
Rodrigo Siqueira
Hawking Zhang
Huang Rui
Jack Zhang
shaoyunl
Aaron Liu
Thomas Hellstrom
Mario Kleiner
Roland Scheidegger
Navid Emamdoost
Emil Velikov
Lukas Bulwahn
Thomas Zimmermann