v1:
1. change return value to avoid smu driver probe fails when FEATURE_PPT is
not enabled.
2. if FEATURE_PPT is not enabled, set power limit value to 0.
v2:
instead dev_err with dev_warn
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1:
1. skip to load smu firmware in sriov mode for aldebaran chip
2. using vbios pptable if in sriov mode.
v2:
clean up smu driver code in sriov code path
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the following feature is wrong, it will cause sysnode of pp_features show error:
1. DPM_XGMI
2. VCN_DPM
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Why: Previously hw fence is alloced separately with job.
It caused historical lifetime issues and corner cases.
The ideal situation is to take fence to manage both job
and fence's lifetime, and simplify the design of gpu-scheduler.
How:
We propose to embed hw_fence into amdgpu_job.
1. We cover the normal job submission by this method.
2. For ib_test, and submit without a parent job keep the
legacy way to create a hw fence separately.
v2:
use AMDGPU_FENCE_FLAG_EMBED_IN_JOB_BIT to show that the fence is
embedded in a job.
v3:
remove redundant variable ring in amdgpu_job
v4:
add tdr sequence support for this feature. Add a job_run_counter to
indicate whether this job is a resubmit job.
v5
add missing handling in amdgpu_fence_enable_signaling
Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Signed-off-by: Jack Zhang <Jack.Zhang7@hotmail.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
UAPI Changes:
Cross-subsystem Changes:
- Add lockdep_assert(once) helpers.
Core Changes:
- Add lockdep assert to drm_is_current_master_locked.
- Fix typos in dma-buf documentation.
- Mark drm irq midlayer as legacy only.
- Fix GPF in udmabuf_create.
- Rename member to correct value in drm_edid.h
Driver Changes:
- Build fix to make nouveau build with NOUVEAU_BACKLIGHT.
- Add MI101AIT-ICP1, LTTD800480070-L6WWH-RT panels.
- Assorted fixes to bridge/it66121, anx7625.
- Add custom crtc_state to simple helpers, and use it to
convert pll handling in mgag200 to atomic.
- Convert drivers to use offset-adjusted framebuffer bo mappings.
- Assorted small fixes and fix for a use-after-free in vmwgfx.
- Convert remaining callers of non-legacy drivers to use linux irqs directly.
- Small cleanup in ingenic.
- Small fixes to virtio and ti-sn65dsi86.
-----BEGIN PGP SIGNATURE-----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=G09r
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2021-08-12' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.15:
UAPI Changes:
Cross-subsystem Changes:
- Add lockdep_assert(once) helpers.
Core Changes:
- Add lockdep assert to drm_is_current_master_locked.
- Fix typos in dma-buf documentation.
- Mark drm irq midlayer as legacy only.
- Fix GPF in udmabuf_create.
- Rename member to correct value in drm_edid.h
Driver Changes:
- Build fix to make nouveau build with NOUVEAU_BACKLIGHT.
- Add MI101AIT-ICP1, LTTD800480070-L6WWH-RT panels.
- Assorted fixes to bridge/it66121, anx7625.
- Add custom crtc_state to simple helpers, and use it to
convert pll handling in mgag200 to atomic.
- Convert drivers to use offset-adjusted framebuffer bo mappings.
- Assorted small fixes and fix for a use-after-free in vmwgfx.
- Convert remaining callers of non-legacy drivers to use linux irqs directly.
- Small cleanup in ingenic.
- Small fixes to virtio and ti-sn65dsi86.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1cf2d7fc-402d-1852-574a-21cbbd2eaebf@linux.intel.com
Show the values of the DMASTART and DMAEND registers when dumping status
to help with failure analysis.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Dumping the full CDMA push buffer takes a long time and isn't very
useful since most of the contents are not relevant. Instead only show
the CDMA push buffer entries associated with current jobs.
While at it, tweak the indentation a bit to make the output more
readable.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The host1x debug code uses a mix of phys_addr_t, dma_addr_t and u32 to
represent addresses. However, these addresses are always DMA addresses
so use the appropriate type.
This fixes some issues with how these addresses are displayed, because
they could be truncated in some cases and not show the full address.
Signed-off-by: Thierry Reding <treding@nvidia.com>
It's useful to know the total number of underflow events and currently
the debug stats are getting reset each time CRTC is being disabled. Let's
account the overall number of events that doesn't get a reset.
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Display controller (DC) performs isochronous memory transfers, and thus,
has a requirement for a minimum memory bandwidth that shall be fulfilled,
otherwise framebuffer data can't be fetched fast enough and this results
in a DC's data-FIFO underflow that follows by a visual corruption.
The Memory Controller drivers provide facility for memory bandwidth
management via interconnect API. Let's wire up the interconnect API
support to the DC driver in order to fix the distorted display output
on T30 Ouya, T124 TK1 and other Tegra devices.
Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # PAZ00 T20 and TK1 T124
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
[treding@nvidia.com: unbreak Tegra186+ display support]
Signed-off-by: Thierry Reding <treding@nvidia.com>
If we created our own connector because the driver does not support the
NO_CONNECTOR flag, we don't want the downstream bridge to *also* create
a connector. And if this driver did pass the NO_CONNECTOR flag (and we
supported that mode) this would change nothing.
Fixes: 4e5763f03e ("drm/bridge: ti-sn65dsi86: Wrap panel with panel-bridge")
Reported-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210811235253.924867-2-robdclark@gmail.com
Byte 26 in a edid struct is supposed to be "Blue and white
least-significant 2 bits", not "black and white". Rename the field
accordingly. This field is not used anywhere, so just renaming it here
for correctness.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20210811205818.156100-1-lucas.demarchi@intel.com
Blob resources without the cross device flag don't have a uuid to share
with other virtio devices. When exporting such blobs, set uuid_state to
STATE_ERR so that virtgpu_virtio_get_uuid doesn't hang.
Signed-off-by: David Stevens <stevensd@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20210811040401.1264234-1-stevensd@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Syzbot reported general protection fault in udmabuf_create. The problem
was in wrong error handling.
In commit 16c243e99d ("udmabuf: Add support for mapping hugepages (v4)")
shmem_read_mapping_page() call was replaced with find_get_page_flags(),
but find_get_page_flags() returns NULL on failure instead PTR_ERR().
Wrong error checking was causing GPF in get_page(), since passed page
was equal to NULL. Fix it by changing if (IS_ER(!hpage)) to if (!hpage)
Reported-by: syzbot+e9cd3122a37c5d6c51e8@syzkaller.appspotmail.com
Fixes: 16c243e99d ("udmabuf: Add support for mapping hugepages (v4)")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210811175052.21254-1-paskripkin@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
UAPI Changes:
- Add I915_MMAP_OFFSET_FIXED
On devices with local memory `I915_MMAP_OFFSET_FIXED` is the only valid
type. On devices without local memory, this caching mode is invalid.
As caching mode when specifying `I915_MMAP_OFFSET_FIXED`, WC or WB will
be used, depending on the object placement on creation. WB will be used
when the object can only exist in system memory, WC otherwise.
Userspace: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11888
- Reinstate the mmap ioctl for (already released) integrated Gen12 platforms
Rationale: Otherwise media driver breaks eg. for ADL-P. Long term goal is
still to sunset the IOCTL even for integrated and require using mmap_offset.
- Reject caching/set_domain IOCTLs on discrete
Expected to become immutable property of the BO
- Disallow changing context parameters after first use on Gen12 and earlier
- Require setting context parameters at creation on platforms after Gen12
Rationale (for both): Allow less dynamic changes to the context to simplify
the implementation and avoid user shooting theirselves in the foot.
- Drop I915_CONTEXT_PARAM_RINGSIZE
Userspace PR for compute-driver has not been merged
- Drop I915_CONTEXT_PARAM_NO_ZEROMAP
Userspace PR for libdrm / Beignet was never landed
- Drop CONTEXT_CLONE API
Userspace PR for Mesa was never landed
- Drop getparam support for I915_CONTEXT_PARAM_ENGINES
Only existed for symmetry wrt. setparam, never used.
- Disallow bonding of virtual engines
Drop the prep work, no hardware has been released needing it.
- (Implicit) Disable gpu relocations
Media userspace was the last userspace to still use them. They
have converted so performance can be regained with an update.
Core Changes:
- Merge topic branch 'topic/i915-ttm-2021-06-11' (from Maarten)
- Merge topic branch 'topic/revid_steppings' (from Matt R)
- Merge topic branch 'topic/xehp-dg2-definitions-2021-07-21' (from Matt R)
- Backmerges drm-next (Rodrigo)
Driver Changes:
- Initial workarounds for ADL-P (Clint)
- Preliminary code for XeHP/DG2 (Stuart, Umesh, Matt R, Prathap, Ram,
Venkata, Akeem, Tvrtko, John, Lucas)
- Fix ADL-S DMA mask size to 39 bits (Tejas)
- Remove code for CNL (Lucas)
- Add ADL-P GuC/HuC firmwares (John)
- Update HuC to 7.9.3 for TGL/ADL-S/RKL (John)
- Fix -EDEADLK handling regression (Ville)
- Implement Wa_1508744258 for DG1 and Gen12 iGFX (Jose)
- Extend Wa_1406941453 to ADL-S (Jose)
- Drop unnecessary workarounds per stepping for SKL/BXT/ICL (Matt R)
- Use fuse info to enable SFC on Gen12 (Venkata)
- Unconditionally flush the pages on acquire on EHL/JSL (Matt A)
- Probe existence of backing struct pages upon userptr creation (Chris, Matt A)
- Add an intermediate GEM proto-context to delay real context creation (Jason)
- Implement SINGLE_TIMELINE with a syncobj (Jason)
- Set the watchdog timeout directly in intel_context_set_gem (Jason)
- Disallow userspace from creating contexts with too many engines (Jason)
- Revert "drm/i915/gem: Asynchronous cmdparser" (Jason)
- Revert "drm/i915: Propagate errors on awaiting already signaled fences" (Jason)
- Revert "drm/i915: Skip over MI_NOOP when parsing" (Jason)
- Revert "drm/i915: Shrink the GEM kmem_caches upon idling" (Daniel)
- Always let TTM handle object migration (Jason)
- Correct the locking and pin pattern for dma-buf (Thomas H, Michael R, Jason)
- Migrate to system at dma-buf attach time (Thomas, Michael R)
- MAJOR refactoring of the GuC backend code to allow for enabling on Gen11+
(Matt B, John, Michal Wa., Fernando, Daniele, Vinay)
- Update GuC firmware interface to v62.0.0 (John, Michal Wa., Matt B)
- Add GuCRC feature to hand over the control of HW RC6 to the GuC on
Gen12+ when GuC submission is enabled (Vinay, Sujaritha, Daniele,
John, Tvrtko)
- Use the correct IRQ during resume and eliminate DRM IRQ midlayer (Thomas Z)
- Add pipelined page migration and clearing (Chris, Thomas H)
- Use TTM for system memory on discrete (Thomas H)
- Implement object migration for display vs. dma-buf (Thomas H)
- Perform execbuffer object locking as a separate step (Thomas H)
- Add support for explicit L3BANK steering (Matt, Daniele)
- Remove duplicated call to ops->pread (Daniel)
- Fix pagefault disabling in the first execbuf slowpath (Daniel)
- Simplify userptr locking (Thomas H)
- Improvements to the GuC CTB code (Matt B, John)
- Make GT workaround upper bounds exclusive (Matt R)
- Check for nomodeset in i915_init() first (Daniel)
- Delete now unused gpu reloc code (Daniel)
- Document RFC plans for GuC submission, DRM scheduler and new parallel
submit uAPI (Matt B)
- Reintroduce buddy allocator this time with TTM (Matt A)
- Support forcing page size with LMEM (Matt A)
- Add i915_sched_engine to abstract a submission queue between backends (Matt B)
- Use accelerated move in TTM (Ram)
- Fix memory leaks from TTM backend (Thomas H)
- Introduce WW transaction helper (Thomas H)
- Improve debug Kconfig texts a bit (Daniel)
- Unify user object creation code (Jason)
- Use a table for i915_init/exit (Jason)
- Move slabs to module init/exit (Daniel)
- Remove now unused i915_globals (Daniel)
- Extract i915_module.c (Daniel)
- Consistently use adl-p/adl-s in WA comments (Jose)
- Finish INTEL_GEN and friends conversion (Lucas)
- Correct variable/function namings (Lucas)
- Code checker fixes (Wan, Matt A)
- Tracepoint improvements (Matt B)
- Kerneldoc improvements (Tvrtko, Jason, Matt A, Maarten)
- Selftest improvements (Chris, Matt A, Tejas, Thomas H, John, Matt B,
Rahul, Vinay)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YQ0JmYiXhGskNcrI@jlahtine-mobl.ger.corp.intel.com
The variable dc->clk_mgr is checked in:
if (dc->clk_mgr && dc->clk_mgr->funcs->get_clock)
This indicates dc->clk_mgr can be NULL.
However, it is dereferenced in:
if (!dc->clk_mgr->funcs->get_clock)
To fix this null-pointer dereference, check dc->clk_mgr and the function
pointer dc->clk_mgr->funcs->get_clock earlier, and return if one of them
is NULL.
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Tuo Li <islituo@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The variable val is declared without initialization, and its address is
passed to amdgpu_i2c_get_byte(). In this function, the value of val is
accessed in:
DRM_DEBUG("i2c 0x%02x 0x%02x read failed\n",
addr, *val);
Also, when amdgpu_i2c_get_byte() returns, val may remain uninitialized,
but it is accessed in:
val &= ~amdgpu_connector->router.ddc_mux_control_pin;
To fix this possible uninitialized-variable access, initialize val to 0 in
amdgpu_i2c_router_select_ddc_port().
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Tuo Li <islituo@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds support to program trap handler settings
when loading driver with software scheduler (sched_policy=2).
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Suggested-by: Jay Cornwall <Jay.Cornwall@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For xnack on, if range ACCESS or ACCESS_IN_PLACE (AIP) by single GPU, or
range is ACCESS_IN_PLACE by mGPUs and all mGPUs connection on XGMI same
hive, the best prefetch location is prefetch_loc GPU. Otherwise, the best
prefetch location is always CPU because GPU does not have coherent
mapping VRAM of other GPUs even with large-BAR PCIe connection.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Attempt od settings restore and disable restore flag on restore fan mode
failure.
v2: Update fan mode to auto and fan speed to zero (Lijo)
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ryan Taylor <Ryan.Taylor@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adds missing edge case to smu_restore_dpm_user_profile.
v2: Don't restore fan mode auto (Lijo)
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ryan Taylor <Ryan.Taylor@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Without this fix boot throws NULL ptr exception at msm_dsi_manager_setup_encoder
on devices like Nexus 7 2013 (MDP4 v4.4).
Fixes: 03436e3ec6 ("drm/msm/dsi: Move setup_encoder to modeset_init")
Cc: <stable@vger.kernel.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20210811170631.39296-1-david@ixit.cz
Signed-off-by: Rob Clark <robdclark@chromium.org>
By making the CRTC's .vblank_enable() function return an error when it
is known that the hardware won't deliver a VBLANK, we can drop the
ingenic_drm_atomic_helper_commit_tail() function and use the standard
drm_atomic_helper_commit_tail() function instead.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210808134526.119198-4-paul@crapouillou.net
The priv->ipu_plane would get a different value further down the code,
without the first assigned value being read first; so the first
assignation can be dropped.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210808134526.119198-2-paul@crapouillou.net
Tag for other trees/branches to pull from in order to have a stable
place to build off of if they want to add new busses for 5.15.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYPkvsg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl8pwCff+mL/zOaU8M1KwIHrEvNH6LgF58AoKgBAeCb
58Lenmw44ofP5itzU5x3
=J5mO
-----END PGP SIGNATURE-----
Merge tag 'bus_remove_return_void-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into drm-next
Bus: Make remove callback return void tag
Tag for other trees/branches to pull from in order to have a stable
place to build off of if they want to add new busses for 5.15.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: fixed up merge conflict in drm]
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/YPkwQwf0dUKnGA7L@kroah.com
Unlike previous generations, 7nm PHYs are required to collaborate with
the host for continuos clock mode. Add changes neccessary to enable
continuous clock mode in the 7nm DSI PHYs.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210805170817.3337665-1-dmitry.baryshkov@linaro.org
[Fix merge conflict, and $description typo]
Signed-off-by: Rob Clark <robdclark@chromium.org>
Changes in V2:
-- correct Fixes text
-- drop commit text
Fixes: 601f0479c5 ("drm/msm/dp: add logs across DP driver for ease of debugging")
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1628609362-2109-1-git-send-email-khsieh@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Initialize both pre-emphasis and voltage swing level to 0 before
start link training and do not end link training until video is
ready to reduce the period between end of link training and video
start to meet Link Layer CTS requirement. Some dongle main link
symbol may become unlocked again if host did not end link training
soon enough after completion of link training 2. Host have to re
train main link if loss of symbol locked detected before end link
training so that the coming video stream can be transmitted to sink
properly. This fixes Link Layer CTS cases 4.3.2.1, 4.3.2.2, 4.3.2.3
and 4.3.2.4.
Changes in v3:
-- merge retrain link if loss of symbol locked happen into this patch
-- replace dp_ctrl_loss_symbol_lock() with dp_ctrl_channel_eq_ok()
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1628196295-7382-7-git-send-email-khsieh@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Response with correct edid checksum saved at connector after corrupted edid
checksum read. This fixes Link Layer CTS cases 4.2.2.3, 4.2.2.6.
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1628196295-7382-6-git-send-email-khsieh@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Remove special handling of replug interrupt and instead treat replug event
as a sequential unplug followed by a plugin event. This is needed to meet
the requirements of DP Link Layer CTS test case 4.2.1.3.
Changes in V2:
-- add fixes statement
Changes in V3:
-- delete EV_HPD_REPLUG_INT
Fixes: f21c8a276c ("drm/msm/dp: handle irq_hpd with sink_count = 0 correctly")
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1628196295-7382-5-git-send-email-khsieh@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Aux hardware calibration sequence requires resetting the aux controller
in order for the new setting to take effect. However resetting the AUX
controller will also clear HPD interrupt status which may accidentally
cause pending unplug interrupt to get lost. Therefore reset aux
controller only when link is in connection state when dp_aux_cmd_fifo_tx()
fail. This fixes Link Layer CTS cases 4.2.1.1 and 4.2.1.2.
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1628196295-7382-4-git-send-email-khsieh@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reduce link rate and re start link training if link training 1
failed due to loss of clock recovery done to fix Link Layer
CTS case 4.3.1.7. Also only update voltage and pre-emphasis
swing level after link training started to fix Link Layer CTS
case 4.3.1.6.
Changes in V2:
-- replaced cr_status with link_status[DP_LINK_STATUS_SIZE]
-- replaced dp_ctrl_any_lane_cr_done() with dp_ctrl_colco_recovery_any_ok()
-- replaced dp_ctrl_any_ane_cr_lose() with !drm_dp_clock_recovery_ok()
Changes in V3:
-- return failed if lane_count <= 1
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1628196295-7382-3-git-send-email-khsieh@codeaurora.org
[remove unused cr_status variable]
Signed-off-by: Rob Clark <robdclark@chromium.org>
DP cable should always connect to DPU during the entire PHY compliance
testing run. Since DP PHY compliance test is executed at irq_hpd event
context, dp_ctrl_off_link_stream() should be used instead of dp_ctrl_off().
dp_ctrl_off() is used for unplug event which is triggered when DP cable is
dis connected.
Changes in V2:
-- add fixes statement
Fixes: f21c8a276c ("drm/msm/dp: handle irq_hpd with sink_count = 0 correctly")
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1628196295-7382-2-git-send-email-khsieh@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
'of_find_device_by_node()' takes a reference that must be released when
not needed anymore.
This is expected to be done in 'dsi_destroy()'.
However, there are 2 issues in 'dsi_get_phy()'.
First, if 'of_find_device_by_node()' succeeds but 'platform_get_drvdata()'
returns NULL, 'msm_dsi->phy_dev' will still be NULL, and the reference
won't be released in 'dsi_destroy()'.
Secondly, as 'of_find_device_by_node()' already takes a reference, there is
no need for an additional 'get_device()'.
Move the assignment to 'msm_dsi->phy_dev' a few lines above and remove the
unneeded 'get_device()' to solve both issues.
Fixes: ec31abf668 ("drm/msm/dsi: Separate PHY to another platform device")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/f15bc57648a00e7c99f943903468a04639d50596.1628241097.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Rob Clark <robdclark@chromium.org>
This check is really about which SQE firmware, rather than which GPU.
Rework to match minimum version based on firmware name, so it doesn't
need to be updated when adding additional GPUs using the same fw.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20210807163019.379003-2-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Hide the DRM midlayer behind CONFIG_DRM_LEGACY, make functions use
the prefix drm_legacy_, and move declarations to drm_legacy.h.
In struct drm_device, move the fields irq and irq_enabled behind
CONFIG_DRM_LEGACY.
All callers have been updated.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-15-tzimmermann@suse.de
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.
DRM IRQ callbacks are now being called directly or inlined.
Calls to platform_get_irq() can fail with a negative errno code.
Abort initialization in this case. The DRM IRQ midlayer does not
handle this case correctly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-13-tzimmermann@suse.de
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.
DRM IRQ callbacks are now being called directly or inlined.
Calls to platform_get_irq() can fail with a negative errno code.
Abort initialization in this case. The DRM IRQ midlayer does not
handle this case correctly.
For most drivers, only the DRM IRQ helpers use irq_enabled from
struct drm_device. Tilcdc also uses irq_enabled to make its error
rollback work correctly. As the field will become legacy, duplicated
the state in the driver's local private structure.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-12-tzimmermann@suse.de
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.
DRM IRQ callbacks are now being called directly or inlined.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-11-tzimmermann@suse.de
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.
DRM IRQ callbacks are now being called directly or inlined.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-10-tzimmermann@suse.de
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.
DRM IRQ callbacks are now being called directly or inlined.
Calls to platform_get_irq() can fail with a negative errno code.
Abort initialization in this case. The DRM IRQ midlayer does not
handle this case correctly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-9-tzimmermann@suse.de
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.
DRM IRQ callbacks are now being called directly or inlined.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Acked-by: Rob Clark <robdclark@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-8-tzimmermann@suse.de
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.
DRM IRQ callbacks are now being called directly or inlined.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-7-tzimmermann@suse.de
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it. DRM IRQ callbacks are now being called
directly or inlined.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-6-tzimmermann@suse.de
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it. DRM IRQ callbacks are now being called
directly or inlined.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-5-tzimmermann@suse.de
Kevin Wang
Jack Zhang
Dave Airlie
Thierry Reding
Dmitry Osipenko
Rob Clark
Lucas De Marchi
David Stevens
Pavel Skripkin
Tuo Li
Mukul Joshi
Philip Yang
Ryan Taylor
David Heidelberg
Paul Cercueil
Dmitry Baryshkov
Kuogee Hsieh
Christophe JAILLET
Thomas Zimmermann