Граф коммитов

115 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds d6a322774c dmaengine updates for 4.5-rc1
This round we have few new features, new driver and updates to few drivers.
 
 The new features to dmaengine core are:
 - Synchronized transfer termination API to terminate the dmaengine
     transfers in synchronized and async fashion as required by users.
     We have its user now in ALSA dmaengine lib, img, at_xdma, axi_dmac
     drivers.
 - Universal API for channel request and start consolidation of request
     flows. It's user is ompa-dma driver.
 - Introduce reuse of descriptors and use in pxa_dma driver
 
 Add/Remove:
 - STM32 DMA driver
 - Removal of unused R-Car HPB-DMAC driver
 
 Updates:
 - ti-dma-crossbar updates for supporting eDMA
 - tegra-apb pm updates
 - idma64
 - mv_xor updates
 - ste_dma updates
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWlO5UAAoJEHwUBw8lI4NH1OAP+QG35WZx3e2kfk7O4xKTugEg
 i0vGdSxMu1ILKUsi+ZjwzGaMcheDDfBTRMzlBZNqYoFfnV1ull2re/GM+DwjCg6C
 xuYDThhwghj+42CNRb5FGNHlLsNczNTsD3KfPAg9BjMOxEUW8bUQMtEp7cEhvf9F
 +BoxTXInrEGeKeZRl557pBSSYfhs/y/b9etMY7JNKSk97C3isNHFRMV3cBESGmch
 GaQR+3IEtbQfsuOypJpPMA2qmH/wQUeiQOgSR0EW9+599azVbUYohDTkBP1qA2aY
 W0/UBybsCo+tFitB8WZTBAkMCmrHXqdub7sfo467oZvuJoqIIflWkr5fgLSI2tdA
 +6EPIXNCjFfk5r3PrmcWBoeJ29S3/t9hRdfSvcWPX5+tdqqcD/qaLsYqMnb15bkj
 sPAbhZcIb7OJRz2ibaTjcamyBXfqV89suRF64Fokm1/sN78IALtv/0RsHwEULmVJ
 yZfRB8U9T7Or45FGODrfeQCIyKkJD0lCfTJryVHUdix+UgidZByuMW726B4E6V6R
 tPB/tQCoHlZeUuWclR1BOpaZhtHmpMFZsBlZCHVU4GIwUkzWhlnt7FgOXPUY8gWf
 zof9rMfPbZzykrlEi+iYLCPG8JCm0gzbcEeMRsr2rIBPmXW8ZRpW4+829wBgdDXs
 vtJLlB8ZTlF2gaDWhDEt
 =D5Fb
 -----END PGP SIGNATURE-----

Merge tag 'dmaengine-4.5-rc1' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine updates from Vinod Koul:
 "This round we have few new features, new driver and updates to few
  drivers.

  The new features to dmaengine core are:
   - Synchronized transfer termination API to terminate the dmaengine
     transfers in synchronized and async fashion as required by users.
     We have its user now in ALSA dmaengine lib, img, at_xdma, axi_dmac
     drivers.
   - Universal API for channel request and start consolidation of
     request flows.  It's user is ompa-dma driver.
   - Introduce reuse of descriptors and use in pxa_dma driver

  Add/Remove:
   - New STM32 DMA driver
   - Removal of unused R-Car HPB-DMAC driver

  Updates:
   - ti-dma-crossbar updates for supporting eDMA
   - tegra-apb pm updates
   - idma64
   - mv_xor updates
   - ste_dma updates"

* tag 'dmaengine-4.5-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (54 commits)
  dmaengine: mv_xor: add suspend/resume support
  dmaengine: mv_xor: de-duplicate mv_chan_set_mode*()
  dmaengine: mv_xor: remove mv_xor_chan->current_type field
  dmaengine: omap-dma: Add support for DMA filter mapping to slave devices
  dmaengine: edma: Add support for DMA filter mapping to slave devices
  dmaengine: core: Introduce new, universal API to request a channel
  dmaengine: core: Move and merge the code paths using private_candidate
  dmaengine: core: Skip mask matching when it is not provided to private_candidate
  dmaengine: mdc: Correct terminate_all handling
  dmaengine: edma: Add probe callback to edma_tptc_driver
  dmaengine: dw: fix potential memory leak in dw_dma_parse_dt()
  dmaengine: stm32-dma: Fix unchecked deference of chan->desc
  dmaengine: sh: Remove unused R-Car HPB-DMAC driver
  dmaengine: usb-dmac: Document SoC specific compatibility strings
  ste_dma40: Delete an unnecessary variable initialisation in d40_probe()
  ste_dma40: Delete another unnecessary check in d40_probe()
  ste_dma40: Delete an unnecessary check before the function call "kmem_cache_destroy"
  dmaengine: tegra-apb: Free interrupts before killing tasklets
  dmaengine: tegra-apb: Update driver to use GFP_NOWAIT
  dmaengine: tegra-apb: Only save channel state for those in use
  ...
2016-01-13 10:59:52 -08:00
Vinod Koul a6eaf23b05 Merge branch 'topic/rcar' into for-linus 2016-01-06 15:18:36 +05:30
Geert Uytterhoeven 4d42e95fc7 dmaengine: sh: Remove unused R-Car HPB-DMAC driver
As of commit 4baadb9e05 ("ARM: shmobile: r8a7778: remove obsolete
setup code"), the Renesas R-Car HPB-DMAC driver is no longer used.
In theory it could still be used on R-Car Gen1 SoCs, but that requires
adding DT support to the driver, which is not planned.

Remove the driver, it can be resurrected from git history when needed.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-12-10 09:43:33 +05:30
Yoshihiro Shimoda d9f5efade2 dmaengine: usb-dmac: fix endless loop in usb_dmac_chan_terminate_all()
This patch fixes an issue that list_for_each_entry() in
usb_dmac_chan_terminate_all() is possible to cause endless loop because
this will move own desc to the desc_freed. So, this driver should use
list_for_each_entry_safe() instead of list_for_each_entry().

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-12-05 13:37:51 +05:30
Geert Uytterhoeven bf55555baa dmaengine: sh: usb-dmac: Fix pm_runtime_{enable,disable}() imbalance
If the call to pm_runtime_get_sync() failed, Runtime PM was left
enabled.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-11-16 08:39:52 +05:30
Geert Uytterhoeven 36fa4a530b dmaengine: sh: usb-dmac: Fix crash on runtime suspend
If CONFIG_PREEMPT=y:

    Unable to handle kernel NULL pointer dereference at virtual address 00000014
    pgd = c0003000
    [00000014] *pgd=80000040004003, *pmd=00000000
    Internal error: Oops: 206 [#1] PREEMPT SMP ARM
    Modules linked in:
    CPU: 0 PID: 17 Comm: kworker/0:1 Tainted: G        W       4.3.0-rc3-koelsch-022
    71-g705498fc5e6a5da8-dirty #1789
    Hardware name: Generic R8A7791 (Flattened Device Tree)
    Workqueue: pm pm_runtime_work
    task: ef578e40 ti: ef57a000 task.ti: ef57a000
    PC is at usb_dmac_chan_halt+0xc/0xc0
    LR is at usb_dmac_runtime_suspend+0x28/0x38
    pc : [<c023c880>]    lr : [<c023c95c>]    psr: 80000113
    sp : ef57bdf8  ip : 00000008  fp : 00000003
    r10: 00000008  r9 : c06ab928  r8 : ef49e810
    r7 : 00000000  r6 : 000000ac  r5 : ef770010  r4 : 00000000
    r3 : 00000000  r2 : 8ffc2b84  r1 : 00000000  r0 : ef770010
    Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
    Control: 30c5307d  Table: 40003000  DAC: fffffffd
    Process kworker/0:1 (pid: 17, stack limit = 0xef57a210)
    Stack: (0xef57bdf8 to 0xef57c000)

    [...

    [<c023c880>] (usb_dmac_chan_halt) from [<c023c95c>] (usb_dmac_runtime_suspend+0x28/0x38)
    [<c023c95c>] (usb_dmac_runtime_suspend) from [<c027b25c>] (pm_genpd_runtime_suspend+0x74/0x23c)

This happens because usb_dmac_probe() calls pm_runtime_put() before
usb_dmac_chan_probe(), leading to the device being suspended before the
DMA channels are initialized, causing a NULL pointer dereference.

Move the call to pm_runtime_put() to the end of usb_dmac_probe() to fix
this.

Add a check to usb_dmac_runtime_suspend() to prevent the crash from
happening in the error path.

Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-11-16 08:39:42 +05:30
Vinod Koul 8a4ce226b9 dmaengine: sort the sh Makefile
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-26 07:50:17 +05:30
Vinod Koul eeb72a8de8 dmaengine: sort the sh Kconfig
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-26 07:49:57 +05:30
Linus Torvalds 1bc5e157ed dmaengine updates for 4.2-rc1
This time we have support for few new devices, few new features and odd
 fixes spread thru the subsystem.
 
 New devices added
 - support for CSRatlas7 dma controller
 - Allwinner H3(sun8i) controller
 - TI DMA crossbar driver on DRA7x
 - new pxa driver
 
 New features added:
 - memset support is bought back now that we have a user in xdmac controller
 - interleaved transfers support different source and destination strides
 - supporting DMA routers and configuration thru DT
 - support for reusing descriptors
 - xdmac memset and interleaved transfer support
 - hdmac support for interleaved transfers
 - omap-dma support for memcpy
 
 Others
 - Constify platform_device_id
 - mv_xor fixes and improvements
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVjsgRAAoJEHwUBw8lI4NHcu8QAMw6EMPSD+tXWr0eDKhZm3zr
 9rURBLXaVKjcboY78uvcZvtzC9PB5AVexoTt7K2zKkeF24t8hIz7nVBAnTqLtd00
 tEoJpDEIxtmRyKkCPpF7LvbVVFh+qD2+66Gf67LMb0UXzOFKsrdAdrfNtST8ezUl
 rQU95ZmZfW1CfCDg0zaM9ipxZWB54txR51Wf1C14Y5SzKWVHSaD7jgAqhA81WPLF
 iIOqGY9VyOh3Ry58ON/x/Q8lOGfMEocXs9+FLa1tMFrO3vKSQB1lPN1NfwbnvZKy
 Oqh+1sqdGwPUoQBEGZfBHcYvVgyX4FC4d8V6BIBPVD3PGt3oQJ6+pVom9ufnDtaQ
 3cxbpNt+n0FywIKEZrIxe96kHrkb7FWL17p3ZuA7n4qmEHt5pabFjqEBS/isqpzB
 CiVJDzh3x3LOlL4zzvp303a/Yn/fnuDJpa1Zfw45uYZgMkyNlatd1Llrxm2Z24j8
 g56Jve+JXx17j1b5yjSVcuWR9QOwBrqJncbFVx7rGLjo755ex24pXEMccvMy2BCD
 x/le8obIGsY3jAU/4k+eJSrI5RLsAins5tCicrL3d12elPCcSlPCR8FyLbNDyFIV
 K67hOmVrkJrqsLVoRtFxEwaLJF1M1DGstjPr42G2W82pF4IbHEF1oHRqAhsXY6xB
 +PStPU1krDOu/nTJOPOm
 =VM4w
 -----END PGP SIGNATURE-----

Merge tag 'dmaengine-4.2-rc1' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine updates from Vinod Koul:
 "This time we have support for few new devices, few new features and
  odd fixes spread thru the subsystem.

  New devices added:
   - support for CSRatlas7 dma controller
   - Allwinner H3(sun8i) controller
   - TI DMA crossbar driver on DRA7x
   - new pxa driver

  New features added:
   - memset support is bought back now that we have a user in xdmac controller
   - interleaved transfers support different source and destination strides
   - supporting DMA routers and configuration thru DT
   - support for reusing descriptors
   - xdmac memset and interleaved transfer support
   - hdmac support for interleaved transfers
   - omap-dma support for memcpy

  Others:
   - Constify platform_device_id
   - mv_xor fixes and improvements"

* tag 'dmaengine-4.2-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (46 commits)
  dmaengine: xgene: fix file permission
  dmaengine: fsl-edma: clear pending interrupts on initialization
  dmaengine: xdmac: Add memset support
  Documentation: dmaengine: document DMA_CTRL_ACK
  dmaengine: virt-dma: don't always free descriptor upon completion
  dmaengine: Revert "drivers/dma: remove unused support for MEMSET operations"
  dmaengine: hdmac: Implement interleaved transfers
  dmaengine: Move icg helpers to global header
  dmaengine: mv_xor: improve descriptors list handling and reduce locking
  dmaengine: mv_xor: Enlarge descriptor pool size
  dmaengine: mv_xor: add support for a38x command in descriptor mode
  dmaengine: mv_xor: Rename function for consistent naming
  dmaengine: mv_xor: bug fix for racing condition in descriptors cleanup
  dmaengine: pl330: fix wording in mcbufsz message
  dmaengine: sirf: add CSRatlas7 SoC support
  dmaengine: xgene-dma: Fix "incorrect type in assignement" warnings
  dmaengine: fix kernel-doc documentation
  dmaengine: pxa_dma: add support for legacy transition
  dmaengine: pxa_dma: add debug information
  dmaengine: pxa: add pxa dmaengine driver
  ...
2015-06-29 09:44:45 -07:00
Mark Brown a178831a63 Merge remote-tracking branches 'asoc/topic/max98095', 'asoc/topic/omap', 'asoc/topic/pxa', 'asoc/topic/qcom' and 'asoc/topic/rcar' into asoc-next 2015-06-05 18:54:57 +01:00
Joe Perches 08acf38e36 dmaengine: rcar-dmac: Use DECLARE_BITMAP
Use the generic mechanism to declare a bitmap instead of unsigned long.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-25 22:42:10 +05:30
Geert Uytterhoeven 8f64b27670 dmaengine: shdma: r8a73a4: Make dma_ts_shift[] static
dma_ts_shift[] isn't used outside this source file. All other users use
the definition from arch/arm/mach-shmobile/dma-register.h.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-25 22:33:07 +05:30
Kuninori Morimoto d23c9a0a5c dmaengine: rcar-dmac: fixup spinlock in rcar-dmac
Current rcar-dmac driver is using spin_lock_irq() / spin_unlock_irq()
in some functions. But, some other driver might call DMAEngine API
during interrupt disabled. In such case, rcar-dmac side spin_unlock_irq()
forcefully allows all interrupts. Therefore, other driver receives
unexpected interruption, and its exclusive access control will be broken.
This patch replaces spin_lock_irq() to spin_lock_irqsave(),
and spin_unlock_irq() to spin_unlock_irqrestore().

Reported-by: Cao Minh Hiep <cm-hiep@jinso.co.jp>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-22 14:14:21 +01:00
Geert Uytterhoeven 8ad31bf45d dmaengine: usb-dmac: Protect PM-only functions to kill warning
If CONFIG_PM=n:

    drivers/dma/sh/usb-dmac.c:677: warning: ‘usb_dmac_runtime_suspend’ defined but not used
    drivers/dma/sh/usb-dmac.c:688: warning: ‘usb_dmac_runtime_resume’ defined but not used

Protect the unused functions by #ifdef CONFIG_PM to fix this.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-04-27 08:36:02 +05:30
Linus Torvalds d6a4c0e5d3 Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dmaengine updates from Vinod Koul:

 - new drivers for:
        - Ingenic JZ4780 controller
        - APM X-Gene controller
        - Freescale RaidEngine device
        - Renesas USB Controller

  - remove device_alloc_chan_resources dummy handlers

  - sh driver cleanups for peri peri and related emmc and asoc patches
    as well

  - fixes and enhancements spread over the drivers

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (59 commits)
  dmaengine: dw: don't prompt for DW_DMAC_CORE
  dmaengine: shdmac: avoid unused variable warnings
  dmaengine: fix platform_no_drv_owner.cocci warnings
  dmaengine: pch_dma: fix memory leak on failure path in pch_dma_probe()
  dmaengine: at_xdmac: unlock spin lock before return
  dmaengine: xgene: devm_ioremap() returns NULL on error
  dmaengine: xgene: buffer overflow in xgene_dma_init_channels()
  dmaengine: usb-dmac: Fix dereferencing freed memory 'desc'
  dmaengine: sa11x0: report slave capabilities to upper layers
  dmaengine: vdma: Fix compilation warnings
  dmaengine: fsl_raid: statify fsl_re_chan_probe
  dmaengine: Driver support for FSL RaidEngine device.
  dmaengine: xgene_dma_init_ring_mngr() can be static
  Documentation: dma: Add documentation for the APM X-Gene SoC DMA device DTS binding
  arm64: dts: Add APM X-Gene SoC DMA device and DMA clock DTS nodes
  dmaengine: Add support for APM X-Gene SoC DMA engine driver
  dmaengine: usb-dmac: Add Renesas USB DMA Controller (USB-DMAC) driver
  dmaengine: renesas,usb-dmac: Add device tree bindings documentation
  dmaengine: edma: fixed wrongly initialized data parameter to the edma callback
  dmaengine: ste_dma40: fix implicit conversion
  ...
2015-04-24 09:49:37 -07:00
Vinod Koul b53c758280 Merge branch 'topic/sh' into for-linus 2015-04-21 00:21:14 +05:30
Arnd Bergmann 7d3beab16d dmaengine: shdmac: avoid unused variable warnings
This driver uses '#ifdef CONFIG_ARCH_SHMOBILE' and '#ifdef CONFIG_ARM'
interchangeably in its sh_dmae_probe function, which causes a build
warning when building for ARM without also enabling shmobile:

dma/sh/shdmac.c: In function sh_dmae_probe:
dma/sh/shdmac.c:696:6: warning: unused variable errirq [-Wunused-variable]
dma/sh/shdmac.c:695:16: warning: unused variable irqflags [-Wunused-variable]
dma/sh/shdmac.c: At top level:
dma/sh/shdmac.c:447:20: warning: sh_dmae_err defined but not used [-Wunused-function]

This changes all the #ifdef to test for CONFIG_ARCH_SHMOBILE to
avoid that warning. An earlier patch from Laurent had fixed the warning
for non-ARM case, but it still remained present in ARM randconfig builds.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 52d6a5ee10 ("DMA: shdma: Fix warnings due to declared but unused symbols")
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-04-17 23:45:06 +05:30
Yoshihiro Shimoda d7d8e892aa dmaengine: usb-dmac: Fix dereferencing freed memory 'desc'
This patch fixes an issue that the usb_dmac_desc_free() is
dereferencing freed memory 'desc' because it uses list_for_each_entry().
This function should use list_for_each_entry_safe().

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-04-17 23:28:48 +05:30
Yoshihiro Shimoda 0c1c8ff32f dmaengine: usb-dmac: Add Renesas USB DMA Controller (USB-DMAC) driver
This DMAC is Renesas USB high-speed module DMA controller that
supports slave transfer.

This USB-DMAC has similar register sets with R-Car Gen2 DMAC, but
the USB-DMAC has specific registers to control the USB transactions.
If this code is added into the rcar-dmac driver, it will become
unreadable. So, this driver is independent from the rcar-dmac.

And, this USB-DMAC uses virt-dma infrastructure.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-04-02 12:57:32 +05:30
Kuninori Morimoto 3cd44dcd35 dmaengine: remove Renesas Audio DMAC peri peri
Renesas R-Car sound (= rsnd) needs 2 DMAC which are called as
Audio DMAC (= 1st DMAC) and Audio DMAC peri peri (2nd DMAC).
And rsnd had assumed that 1st / 2nd DMACs are implemented as DMAEngine.
But, in result of DMA ML discussion, 2nd DMAC was concluded that it is
not a general purpose DMAC (2nd DMAC is for Device to Device inside
sound system). Additionally, current DMAEngine can't support Device to
Device, and we don't have correct DT bindings for it at this point.
So the easiest solution for it is that move it from DMAEngine to rsnd
driver.
Audio DMAC peri peri on DMAEngine is no longer needed. remove it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2015-03-18 13:57:54 +05:30
Geert Uytterhoeven b6d1778bc5 dmaengine: shdma: Move DMA stop to (runtime) suspend callbacks
During system reboot, the sh-dma-engine device may be runtime-suspended,
causing a crash:

    Unhandled fault: imprecise external abort (0x1406) at 0x0002c02c
    Internal error: : 1406 [#1] SMP ARM
    ...
    PC is at sh_dmae_ctl_stop+0x28/0x64
    LR is at sh_dmae_ctl_stop+0x24/0x64

If the sh-dma-engine is runtime-suspended, its module clock is turned
off, and its registers cannot be accessed.

To fix this, move the call to sh_dmae_ctl_stop(), which touches the
DMAOR register, to the sh_dmae_suspend() and sh_dmae_runtime_suspend()
callbacks.  This makes PM operations more symmetric, as both
sh_dmae_resume() and sh_dmae_runtime_resume() already call sh_dmae_rst()
to re-initialize the DMAOR register.

Remove sh_dmae_shutdown(), as it became empty.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-02 22:10:44 +05:30
Arnd Bergmann 411fdaf846 dmaengine: shdma: use normal interface for passing slave id
in dma_slave_config, which is incompatible with the way that the
dmaengine API normally works.

I've had a closer look at the existing code now and found that all
slave drivers that pass a slave_id in dma_slave_config for SH do that
right after passing the same ID into shdma_chan_filter, so we can just
rely on that. However, the various shdma drivers currently do not
remember the slave ID that was passed into the filter function when
used in non-DT mode and only check the value to find a matching channel,
unlike all other drivers.

There might still be drivers that are not part of the kernel that rely
on setting the slave_id to some other value, so to be on the safe side,
this adds another 'real_slave_id' field to shdma_chan that remembers
the ID and uses it when a driver passes a zero slave_id in dma_slave_config,
like most drivers do.

Eventually, the real_slave_id and slave_id fields should just get merged
into one field, but that requires other changes.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-23 16:12:24 +05:30
Laurent Pinchart be6893e195 dmaengine: rcar-dmac: Disable channel 0 when using IOMMU
A still unconfirmed hardware bug prevents the IPMMU microTLB 0 to be
flushed correctly, resulting in memory corruption. DMAC 0 channel 0 is
connected to microTLB 0 on currently supported platforms, so we can't
use it with the IPMMU. As the IOMMU API operates at the device level we
can't disable it selectively, so ignore channel 0 for now if the device
is part of an IOMMU group.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-16 09:33:35 +05:30
Laurent Pinchart 3f46306127 dmaengine: rcar-dmac: Work around descriptor mode IOMMU errata
When descriptor memory is accessed through an IOMMU the DMADAR register
isn't initialized automatically from the first descriptor at beginning
of transfer by the DMAC like it should. Initialize it manually with the
destination address of the first chunk.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-16 09:33:34 +05:30
Laurent Pinchart 6a634808e3 dmaengine: rcar-dmac: Allocate hardware descriptors with DMAC device
When wired to an IOMMU to access data, the DMAC accesses the hardware
descriptors through the IOMMU as well. We're using the DMA mapping API
to allocate the descriptors, but with a NULL device at the moment, which
prevents IOMMU mappings from being created. Fix this by passing the DMAC
device instead.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-16 09:33:33 +05:30
Laurent Pinchart f7638c904b dmaengine: rcar-dmac: Fix oops due to unintialized list in error ISR
The error interrupt handler stops and reinitializes all channels. This
causes a crash for channels that have never been used, as their
descriptor lists are uninitialized. Fix it by initializing the
descriptor lists at probe time.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-16 09:33:33 +05:30
Laurent Pinchart f39150720e dmaengine: rcar-dmac: Fix spinlock issues in interrupt
The rcar_dmac_desc_put() function is called in interrupt context and
must thus use spin_lock_irqsave() instead of spin_lock_irq().

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-16 09:33:32 +05:30
Laurent Pinchart a55e07c8a5 dmaengine: rcar-dmac: Fix uninitialized variable usage
The desc variable is used uninitialized in the rcar_dmac_desc_get() and
rcar_dmac_xfer_chunk_get() functions if descriptors need to be
allocated. Fix it.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-12 12:52:19 +05:30
Sergei Shtylyov bf44a4175e dmaengine: shdmac: extend PM methods
In order to make it possible to restore from hibernation not only in Linux but
also in e.g. U-Boot, we have to use sh_dmae_{suspend|resume}() for the {freeze|
thaw|restore}() PM methods. It's handy to achieve this with SIMPLE_DEV_PM_OPS()
macro; since  that macro doesn't do anything when CONFIG_PM_SLEEP  is undefined,
we don't need to #define sh_dmae_{suspend|resume} NULL anymore but we'll have to
enclose sh_dmae_{suspend|resume}() into the new #ifdef...

Based on original patch by Mikhail Ulyanov <mikhail.ulyanov@cogentembedded.com>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-12 12:52:18 +05:30
Sergei Shtylyov 82bf90c628 dmaengine: shdmac: use SET_RUNTIME_PM_OPS()
Use SET_RUNTIME_PM_OPS() to initialize the runtime PM method pointers in the
'struct dev_pm_ops';  since that macro doesn't  do anything  if CONFIG_PM is
not defined, we have  to move #ifdef up to also cover the runtime PM methods
in order to avoid compilation warnings.

Based on orignal patch by Mikhail Ulyanov <mikhail.ulyanov@cogentembedded.com>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-12 12:52:17 +05:30
Vinod Koul 46c2eb6459 Merge branch 'topic/rcar' into for-linus 2015-02-02 16:55:43 -08:00
Kuninori Morimoto 5cf5aec5b3 dmaengine: shdmac: fixup WARNING of slave caps retrieval
ecc19d1786
(dmaengine: Add a warning for drivers not using the generic slave
caps retrieval) added WARN() for DMA_SLAVE.
Kernel will shows WARNING without this patch.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-01-25 22:37:20 -08:00
Kuninori Morimoto 2b5fbb824f dmaengine: rcar-hpbdma: tidyup residue_granularity
The driver doesn't support residue reporting at all.
residue_granularity should be set to DMA_RESIDUE_GRANULARITY_DESCRIPTOR.
Special thanks to Laurent

Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-01-25 22:37:05 -08:00
Kuninori Morimoto 7a96337d05 dmaengine: rcar-hpbdma: fixup WARNING of slave caps retrieval
ecc19d1786
(dmaengine: Add a warning for drivers not using the generic slave
caps retrieval) added WARN() for DMA_SLAVE.
Kernel will shows WARNING without this patch.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-01-13 23:53:01 +05:30
Jürg Billeter ee4b876bbe dmaengine: rcar-dmac: Handle hardware descriptor allocation failure
If the atomic DMA coherent pool is too small, disable use of hardware
descriptor lists instead of crashing the system:

ERROR: 256 KiB atomic DMA coherent pool is too small!
Please increase it with coherent_pool= kernel parameter!

Unable to handle kernel NULL pointer dereference at virtual address 00000004
Internal error: Oops: a07 [#1] PREEMPT SMP ARM

PC is at rcar_dmac_chan_reinit+0x3c/0x160
LR is at _raw_spin_lock_irqsave+0x18/0x5c

[<802132c0>] (rcar_dmac_chan_reinit) from [<80214818>] (rcar_dmac_isr_error+0x84/0xa0)
[<80214818>] (rcar_dmac_isr_error) from [<80060484>] (handle_irq_event_percpu+0x50/0x150)
[<80060484>] (handle_irq_event_percpu) from [<800605c0>] (handle_irq_event+0x3c/0x5c)
[<800605c0>] (handle_irq_event) from [<8006350c>] (handle_fasteoi_irq+0xb8/0x198)
[<8006350c>] (handle_fasteoi_irq) from [<8005fdb0>] (generic_handle_irq+0x20/0x30)
[<8005fdb0>] (generic_handle_irq) from [<8000fcd0>] (handle_IRQ+0x50/0xc4)
[<8000fcd0>] (handle_IRQ) from [<800092cc>] (gic_handle_irq+0x28/0x5c)
[<800092cc>] (gic_handle_irq) from [<80012700>] (__irq_svc+0x40/0x70)

Kernel panic - not syncing: Fatal exception in interrupt

Signed-off-by: Jürg Billeter <j@bitron.ch>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2014-12-23 11:13:03 +02:00
Laurent Pinchart 1ed1315f9b dmaengine: rcar-dmac: Cache hardware descriptors memory
Unlike DMA transfers descriptors that are preallocated and cached,
memory used to store hardware descriptors is allocated and freed with
the DMA coherent allocation API for every transfer. Besides degrading
performances, this creates a CMA stress test that seems to cause issues.
Running dmatest with the noverify option produces

[   50.066539] alloc_contig_range test_pages_isolated(6b845, 6b846) failed
[   50.235180] alloc_contig_range test_pages_isolated(6b848, 6b84e) failed
[   52.964584] alloc_contig_range test_pages_isolated(6b847, 6b848) failed
[   54.127113] alloc_contig_range test_pages_isolated(6b843, 6b844) failed
[   56.270253] alloc_contig_range test_pages_isolated(6b84c, 6b850) failed

The root cause needs to be fixed, but in the meantime, as a workaround
and a performance improvement, cache hardware descriptors.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2014-12-23 11:13:03 +02:00
Laurent Pinchart ccadee9b1e dmaengine: rcar-dmac: Implement support for hardware descriptor lists
The DMAC supports hardware-based auto-configuration from descriptor
lists. This reduces the number of interrupts required for processing a
DMA transfer. Support that mode in the driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2014-12-23 11:13:02 +02:00
Laurent Pinchart 87244fe5ab dmaengine: rcar-dmac: Add Renesas R-Car Gen2 DMA Controller (DMAC) driver
The DMAC is a general purpose multi-channel DMA controller that supports
both slave and memcpy transfers.

The driver currently supports the DMAC found in the r8a7790 and r8a7791
SoCs. Support for compatible DMA controllers (such as the audio DMAC)
will be added later.

Feature-wise, automatic hardware handling of descriptors chains isn't
supported yet. LPAE support is implemented.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2014-12-23 11:13:01 +02:00
Maxime Ripard be60f94074 dmaengine: sh: Split device_control
Split the device_control callback of the Super-H DMA driver to make use of the
newly introduced callbacks, that will eventually be used to retrieve slave
capabilities.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-22 12:32:16 +05:30
Linus Torvalds e6b5be2be4 Driver core patches for 3.19-rc1
Here's the set of driver core patches for 3.19-rc1.
 
 They are dominated by the removal of the .owner field in platform
 drivers.  They touch a lot of files, but they are "simple" changes, just
 removing a line in a structure.
 
 Other than that, a few minor driver core and debugfs changes.  There are
 some ath9k patches coming in through this tree that have been acked by
 the wireless maintainers as they relied on the debugfs changes.
 
 Everything has been in linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlSOD20ACgkQMUfUDdst+ylLPACg2QrW1oHhdTMT9WI8jihlHVRM
 53kAoLeteByQ3iVwWurwwseRPiWa8+MI
 =OVRS
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core update from Greg KH:
 "Here's the set of driver core patches for 3.19-rc1.

  They are dominated by the removal of the .owner field in platform
  drivers.  They touch a lot of files, but they are "simple" changes,
  just removing a line in a structure.

  Other than that, a few minor driver core and debugfs changes.  There
  are some ath9k patches coming in through this tree that have been
  acked by the wireless maintainers as they relied on the debugfs
  changes.

  Everything has been in linux-next for a while"

* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
  Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
  fs: debugfs: add forward declaration for struct device type
  firmware class: Deletion of an unnecessary check before the function call "vunmap"
  firmware loader: fix hung task warning dump
  devcoredump: provide a one-way disable function
  device: Add dev_<level>_once variants
  ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
  ath: use seq_file api for ath9k debugfs files
  debugfs: add helper function to create device related seq_file
  drivers/base: cacheinfo: remove noisy error boot message
  Revert "core: platform: add warning if driver has no owner"
  drivers: base: support cpu cache information interface to userspace via sysfs
  drivers: base: add cpu_device_create to support per-cpu devices
  topology: replace custom attribute macros with standard DEVICE_ATTR*
  cpumask: factor out show_cpumap into separate helper function
  driver core: Fix unbalanced device reference in drivers_probe
  driver core: fix race with userland in device_add()
  sysfs/kernfs: make read requests on pre-alloc files use the buffer.
  sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
  fs: sysfs: return EGBIG on write if offset is larger than file size
  ...
2014-12-14 16:10:09 -08:00
Yoshihiro Shimoda 26fd830a99 dmaengine: shdma: fix a race condition in __ld_cleanup()
This patch fixes a race condition about a list of shdma-base driver.
If we don't apply this patch, a dma slave driver (especially a usb
peripheral driver) may not be able to start the transfer.

If a dma slave driver has a callback, __ld_cleanup() will call
the callback before this driver removes the list. After the callback,
since the return value of __ld_cleanup() is not zero,
shdma_chan_ld_cleanup() calls __ld_cleanup() again. And, __ld_clean()
will removes the list.

At this time, if a dma slave driver calls dmaengine_submit() before
this driver removes the list, this driver will set schan->pm_state
to SHDMA_PM_PENDING in shdma_tx_submit(). And then, even if a dma
slave driver calls dma_async_issue_pending(), this driver don't
start the transfer because the schan->pm_state is SHDMA_PM_PENDING
in shdma_issue_pending().

So, this patch adds a new condition in __ld_clean() to check if the
schan->pm_state is SHDMA_PM_PENDING or not.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-11-17 13:50:42 +05:30
Kiran Padwal cd166280b7 dmaengine: Remove .owner field for driver
There is no need to init .owner field.

Based on the patch from Peter Griffin <peter.griffin@linaro.org>
"mmc: remove .owner field for drivers using module_platform_driver"

This patch removes the superflous .owner field for drivers which
use the module_platform_driver API, as this is overriden in
platform_driver_register anyway."

Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com>
[for nvidia]
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-11-06 11:54:18 +05:30
Maxime Ripard 1e916474a9 dmaengine: sh: Remove chancnt affectations
chanctnt is already filled by dma_async_device_register, which uses the channel
list to know how much channels there is.

Since it's already filled, we can safely remove it from the drivers' probe
function.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-11-06 11:33:07 +05:30
Wolfram Sang 696f26e740 dma: sh: drop owner assignment from platform_drivers
A platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20 16:20:29 +02:00
Ryo Kataoka b19f40b8bf dma: rcar-audmapp: Fix for no corresponding slave ID
In case of no corresponding slave ID, the audmapp_set_slave() returns
-ENXIO same as sh_dmae_set_slave() of shdmac.c.
DMAEngine might return wrong channel without this patch

Signed-off-by: Ryo Kataoka <ryo.kataoka.wt@renesas.com>
Signed-off-by: Jun Watanabe <jun.watanabe.ue@renesas.com>,
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-08-28 12:42:10 +05:30
Laurent Pinchart 31c1e5a135 dmaengine: Remove the context argument to the prep_dma_cyclic operation
The argument is always set to NULL and never used. Remove it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-08-04 13:41:50 +05:30
Laurent Pinchart 4415b03abb dmaengine: shdma: Allocate cyclic sg list dynamically
The sg list used to prepare cyclic DMA descriptors is currently
allocated statically on the stack as an array of 32 elements. This makes
the shdma_prep_dma_cyclic() function consume a lot of stack space, as
reported by the compiler:

drivers/dma/sh/shdma-base.c: In function ‘shdma_prep_dma_cyclic’:
drivers/dma/sh/shdma-base.c:715:1: warning: the frame size of 1056 bytes
is larger than 1024 bytes [-Wframe-larger-than=]

Given the limited Linux kernel stack size, this could lead to stack
overflows. Fix the problem by allocating the sg list dynamically.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-31 17:15:45 +05:30
Laurent Pinchart c091ff51b4 dmaengine: shdma: Make channel filter ignore unrelated devices
The shdma_chan_filter() function relies on the DMA channel being
embedded in an shdma_chan structure. If this assumption isn't true, for
instance when the system contains DMA channels supported by an unrelated
driver, the function will crash.

Avoid this by returning false directly when the channel belongs to an
unrelated device.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-31 17:15:45 +05:30
Laurent Pinchart 9f2c2bb312 dmaengine: sh: Rework Kconfig and Makefile
Separate helpers and drivers in the Kconfig and Makefile to improve
readability and move the CONFIG_OF dependency from the Makefile to
Kconfig.

[pebolle@tiscali.nl: reported need to rename SHDMA_R8A73A4 instances]
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[horms+renesas@verge.net.au: squashed rename of SHDMA_R8A73A4 instances]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-31 17:15:45 +05:30
Vinod Koul db0e701819 Merge commit 'renesas-rcar-audmapp-for-v3.17' into for-linus 2014-07-28 17:26:36 +05:30