Граф коммитов

75 Коммитов

Автор SHA1 Сообщение Дата
Aravind Gopalakrishnan 1a8bc7707e EDAC, amd64_edac: Update copyright and remove changelog
Git provides us all the changelogs anyway. So trim the comments section
here. Update the copyrights info while at it.

Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1443440593-2316-3-git-send-email-Aravind.Gopalakrishnan@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
2015-09-29 13:41:04 +02:00
Aravind Gopalakrishnan da92110dfd EDAC, amd64_edac: Extend scrub rate support to F15hM60h
The scrub rate control register has moved to function 2 in PCI config
space and is at a different offset on family 0x15, models 0x60 and
later. The minimum recommended scrub rate has also changed. (Refer to
D18F2x1c9_dct[1:0][DramScrub] in Fam15hM60h BKDG).

Adjust set_scrub_rate() and get_scrub_rate() functions to accommodate
this.

Tested on F15hM60h, Fam15h, models 00h-0fh and Fam10h systems.

Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1443440593-2316-2-git-send-email-Aravind.Gopalakrishnan@amd.com
[ Cleanup conditionals. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
2015-09-29 13:25:33 +02:00
Takashi Iwai e339f1ec97 EDAC: amd64: Use static attribute groups
Instead of calling device_create_file() and device_remove_file()
manually, pass the static attribute groups with the new
edac_mc_add_mc_with_groups(). The conditional creation of inject sysfs
files is done by a proper is_visible callback.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: http://lkml.kernel.org/r/1423046938-18111-4-git-send-email-tiwai@suse.de
Signed-off-by: Borislav Petkov <bp@suse.de>
2015-02-23 13:08:09 +01:00
Aravind Gopalakrishnan a597d2a5d9 amd64_edac: Add F15h M60h support
This patch adds support for ECC error decoding for F15h M60h processor.
Aside from the usual changes, the patch adds support for some new features
in the processor:
 - DDR4(unbuffered, registered); LRDIMM DDR3 support
   - relevant debug messages have been modified/added to report these
     memory types
 - new dbam_to_cs mappers
   - if (F15h M60h && LRDIMM); we need a 'multiplier' value to find
     cs_size. This multiplier value is obtained from the per-dimm
     DCSM register. So, change the interface to accept a 'cs_mask_nr'
     value to facilitate this calculation
 - switch-casing determine_memory_type()
   - done to cleanse the function of too many if-else statements
     and improve readability
   - This is now called early in read_mc_regs() to cache dram_type

Misc cleanup:
 - amd64_pci_table[] is condensed by using PCI_VDEVICE macro.

Testing details:
Tested the patch by injecting 'ECC' type errors using mce_amd_inj
and error decoding works fine.

Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Link: http://lkml.kernel.org/r/1414617483-4941-1-git-send-email-Aravind.Gopalakrishnan@amd.com
[ Boris: determine_memory_type() cleanups ]
Signed-off-by: Borislav Petkov <bp@suse.de>
2014-10-30 13:42:48 +01:00
Aravind Gopalakrishnan 7981a28f1a amd64_edac: Modify usage of amd64_read_dct_pci_cfg()
Rationale behind this change:
 - F2x1xx addresses were stopped from being mapped explicitly to DCT1
   from F15h (OR) onwards. They use _dct[0:1] mechanism to access the
   registers. So we should move away from using address ranges to select
   DCT for these families.
 - On newer processors, the address ranges used to indicate DCT1 (0x140,
   0x1a0) have different meanings than what is assumed currently.

Changes introduced:
 - amd64_read_dct_pci_cfg() now takes in dct value and uses it for
   'selecting the dct'
 - Update usage of the function. Keep in mind that different families
   have specific handling requirements
 - Remove [k8|f10]_read_dct_pci_cfg() as they don't do much different
   from amd64_read_pci_cfg()
   - Move the k8 specific check to amd64_read_pci_cfg
 - Remove f15_read_dct_pci_cfg() and move logic to amd64_read_dct_pci_cfg()
 - Remove now needless .read_dct_pci_cfg

Testing:
 - Tested on Fam 10h; Fam15h Models: 00h, 30h; Fam16h using 'EDAC_DEBUG'
   and mce_amd_inj
 - driver obtains info from F2x registers and caches it in pvt
   structures correctly
 - ECC decoding works fine

Signed-off-by: Aravind Gopalakrishnan <aravind.gopalakrishnan@amd.com>
Link: http://lkml.kernel.org/r/1410799058-3149-1-git-send-email-aravind.gopalakrishnan@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
2014-09-23 13:16:05 +02:00
Aravind Gopalakrishnan 85a8885bd0 amd64_edac: Add support for newer F16h models
Extend ECC decoding support for F16h M30h. Tested on F16h M30h with ECC
turned on using mce_amd_inj module and the patch works fine.

Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Link: http://lkml.kernel.org/r/1392913726-16961-1-git-send-email-Aravind.Gopalakrishnan@amd.com
Tested-by: Arindam Nath <Arindam.Nath@amd.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
2014-02-27 18:03:16 +01:00
Chen, Gong 10ef6b0dff bitops: Introduce a more generic BITMASK macro
GENMASK is used to create a contiguous bitmask([hi:lo]). It is
implemented twice in current kernel. One is in EDAC driver, the other
is in SiS/XGI FB driver. Move it to a more generic place for other
usage.

Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-10-21 15:12:01 -07:00
Borislav Petkov a4b4bedce8 amd64_edac: Get rid of boot_cpu_data accesses
Now that we cache (family, model, stepping) locally, use them instead of
boot_cpu_data.

No functionality change.

Signed-off-by: Borislav Petkov <bp@suse.de>
2013-08-12 16:01:56 +02:00
Aravind Gopalakrishnan 18b94f66f9 amd64_edac: Add ECC decoding support for newer F15h models
On newer models, support has been included for upto 4 DCT's, however,
only DCT0 and DCT3 are currently configured (cf BKDG Section 2.10).
Also, the routing DRAM Requests algorithm is different for F15h M30h.
Thus it is cleaner to use a brand new function rather than adding quirks
to the more generic f1x_match_to_this_node(). Refer to "2.10.5 DRAM
Routing Requests" in the BKDG for further info.

Tested on Fam15h M30h with ECC turned on using mce_amd_inj facility and
verified to be functionally correct.

While at it, verify if erratum workarounds for E505 and E637 still hold.
From email conversations within AMD, the current status of the errata
is:

      * Erratum 505: fixed in model 0x1, stepping 0x1 and later.
      * Erratum 637: not fixed.

Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
[ Cleanups, corrections ]
Signed-off-by: Borislav Petkov <bp@suse.de>
2013-08-12 16:00:10 +02:00
Aravind Gopalakrishnan 94c1acf2c8 amd64_edac: Add Family 16h support
Add code to handle DRAM ECC errors decoding for Fam16h.

Tested on Fam16h with ECC turned on using the mce_amd_inj facility and
works fine.

Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
[ Boris: cleanups and clarifications ]
Signed-off-by: Borislav Petkov <bp@suse.de>
2013-04-19 12:46:50 +02:00
Daniel J Blueman c7e5301a1b amd64_edac: Fix type usage in NB IDs and memory ranges
Use appropriate types for northbridge IDs and memory ranges. Mark
immutable data const and keep within compilation unit on related
structures.

Signed-off-by: Daniel J Blueman <daniel@numascale-asia.com>
Link: http://lkml.kernel.org/r/1354265060-22956-2-git-send-email-daniel@numascale-asia.com
[Boris: Drop arg change to node_to_amd_nb]
Signed-off-by: Borislav Petkov <bp@alien8.de>
2013-01-10 16:18:00 +01:00
Daniel J Blueman 772c3ff385 x86, AMD, NB: Add multi-domain support
Fix get_node_id to match northbridge IDs from the array of detected
ones, allowing multi-server support such as with Numascale's
NumaConnect, renaming to 'amd_get_node_id' for consistency.

Signed-off-by: Daniel J Blueman <daniel@numascale-asia.com>
Link: http://lkml.kernel.org/r/1353997932-8475-1-git-send-email-daniel@numascale-asia.com
[Boris: shorten lines to fit 80 cols]
Signed-off-by: Borislav Petkov <bp@alien8.de>
2013-01-10 16:17:58 +01:00
Borislav Petkov 0a5dfc3140 amd64_edac: Use DBAM_DIMM macro
Instead of open-coding it, use the DBAM_DIMM macro in
amd64_csrow_nr_pages() which we have already.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28 11:46:19 +01:00
Borislav Petkov 33ca0643c9 amd64_edac: Reorganize error reporting path
Rewrite CE/UE paths so that they use the same code and drop additional
code duplication in handle_ue. Add a struct err_info which collects
required info for the error reporting. This, in turn, helps slimming all
edac_mc_handle_error() calls down to one.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28 11:45:34 +01:00
Borislav Petkov 66fed2d464 amd64_edac: Improve error injection
When injecting DRAM ECC errors over the F3xB[8,C] interface, the machine
does this by injecting the error in the next non-cached access. This
takes relatively long time on a normal system so that in order for us to
expedite it, we disable the caches around the injection.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28 11:45:01 +01:00
Borislav Petkov 6e71a870b8 amd64_edac: Cleanup error injection code
Invert kstrtoul return value testing and win one indentation level.
Also, shorten up macro names so that the lines can fit into 80 cols. No
functional change.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28 11:44:35 +01:00
Borislav Petkov 43aff26ce1 EDAC: Change Boris' email address
My @amd.com address will be invalid soon so move to private
email address.

Signed-off-by: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/1351532410-4887-2-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-30 10:05:51 +01:00
Mauro Carvalho Chehab c56087595f amd64_edac: convert sysfs logic to use struct device
Now that the EDAC core supports struct device, there's no sense
on having any logic at the EDAC core to simulate it. So, instead
of adding such logic there, change the logic at amd64_edac to
use it.

Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11 13:23:40 -03:00
Borislav Petkov c1ae68309b amd64_edac: Erratum #637 workaround
F15h CPUs may report a non-DRAM address when reporting an error address
belonging to a CC6 state save area. Add a workaround to detect this
condition and compute the actual DRAM address of the error as documented
in the Revision Guide for AMD Family 15h Models 00h-0Fh Processors.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-04-26 16:18:56 +02:00
Borislav Petkov f08e457cec amd64_edac: Factor in CC6 save area
F15h and later use a portion of DRAM as a CC6 storage area. BIOS
programs D18F1x[17C:140,7C:40] DRAM Base/Limit accordingly by
subtracting the storage area from the DRAM limit setting. However, in
order for edac to consider that part of DRAM too, we need to include it
into the per-node range.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-04-26 16:18:44 +02:00
Borislav Petkov 151fa71c58 amd64_edac: Fix DRAM base macros
Return unsigned u8 values only.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-03-17 14:46:30 +01:00
Borislav Petkov b487c33e55 amd64_edac: Fix node id signedness
A node id can never be negative since we use it as an index into
the DRAM ranges array. This also makes one of the BUG_ON conditions
redundant.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-03-17 14:46:28 +01:00
Borislav Petkov d88977a9c4 amd64_edac: Drop redundant declarations
Those were moved to the mce_amd.h header.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-03-17 14:46:27 +01:00
Borislav Petkov df71a05324 amd64_edac: Enable driver on F15h
Add the PCI device ids required for driver registration. Remove
pvt->ctl_name and use the family descriptor directly, instead. Then,
bump driver version and fixup its format. Finally, enable DRAM ECC
decoding on F15h.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-03-17 14:46:26 +01:00
Borislav Petkov a3b7db09a6 amd64_edac: Adjust ECC symbol size to F15h
F15h has the same ECC symbol size options as F10h revD and later so
adjust checks to that. Simplify code a bit.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-03-17 14:46:26 +01:00
Borislav Petkov 87b3e0e6e4 amd64_edac: Simplify scrubrate setting
Drop per-instance variable and compute min scrubrate dynamically.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-03-17 14:46:25 +01:00
Borislav Petkov 41d8bfaba7 amd64_edac: Improve DRAM address mapping
Drop static tables which map the bits in F2x80 to a chip select size in
favor of functions doing the mapping with some bit fiddling. Also, add
F15 support.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-03-17 14:46:24 +01:00
Borislav Petkov 5a5d237169 amd64_edac: Sanitize ->read_dram_ctl_register
This function is relevant for F10h and higher, and it has only one
callsite so drop its function pointer from the low_ops struct.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-03-17 14:46:23 +01:00
Borislav Petkov 614ec9d853 amd64_edac: Revamp online spare handling
Replace per-DCT macros with smarter ones, drop hack and look for the
spare rank on all chip selects on a channel.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-03-17 14:46:21 +01:00
Borislav Petkov 95b0ef55cd amd64_edac: Add support for interleaved region swapping
On revC3 and revE Fam10h machines and later, non-interleaved graphics
framebuffer memory under the 16G mark can be swapped with a region
located at the bottom of memory so that the GPU can use the interleaved
region and thus two channels. Add support for that.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-03-17 14:46:20 +01:00
Borislav Petkov 700466249f amd64_edac: Unify get_error_address
The address bits from MC4_STATUS differ only between K8 and the rest so
no need for a per-family method.

No functional change.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-03-17 14:46:19 +01:00
Borislav Petkov f192c7b16c amd64_edac: Simplify decoding path
Use the struct mce directly instead of copying from it into a custom
struct err_regs.

No functionality change.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-03-17 14:46:19 +01:00
Borislav Petkov 5980bb9cd8 amd64_edac: Cleanup old defines cruft
Remove unused defines, drop family names from define names.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-03-17 14:46:18 +01:00
Borislav Petkov a97fa68ec4 amd64_edac: Cleanup NBCFG handling
The fact whether we are chipkill capable or not does not have any
bearing when computing the channel index on a ganged DCT configuration
so remove that. Also, simplify debug statements. Finally, remove old
error injection leftovers, while at it.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-03-17 14:46:16 +01:00
Borislav Petkov c9f4f26eae amd64_edac: Cleanup NBCTL code
Remove family names from macro names, drop single bit defines and
comment their meaning instead.

No functional change.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-03-17 14:46:15 +01:00
Borislav Petkov 78da121e15 amd64_edac: Cleanup DCT Select Low/High code
Shorten macro names, remove family name from macros, fix macro
arguments, shorten debug strings.

No functionality change.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-03-17 14:46:15 +01:00
Borislav Petkov cb32850744 amd64_edac: Cleanup Dram Configuration registers handling
* Restrict DCT ganged mode check since only Fam10h supports it
* Adjust DRAM type detection for BD since it only supports DDR3
* Remove second and thus unneeded DCLR read in k8_early_channel_count() - we do
  that in read_mc_regs()
* Cleanup comments and remove family names from register macros
* Remove unused defines

There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-03-17 14:46:14 +01:00
Borislav Petkov c8e518d567 amd64_edac: Sanitize f10_get_base_addr_offset
This function maps the system address to the normalized DCT address.
Document what the code does for more clarity and wrap insane bitmasks in
a more understandable macro which generates them. Also, reduce number of
arguments passed to the function. Finally, rename this function to what
it actually does.

No functional change.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-03-17 14:46:13 +01:00
Borislav Petkov 11c75eadaf amd64_edac: Cleanup chipselect handling
Add a struct representing the DRAM chip select base/limit register
pairs. Concentrate all CS handling in a single function. Also, add CS
looping macros for cleaner, more readable code. While at it, adjust code
to F15h. Finally, do smaller macro names cleanups (remove family names
from register macros) and debug messages clarification.

No functional change.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-03-17 14:46:12 +01:00
Borislav Petkov bc21fa5787 amd64_edac: Cleanup DHAR handling
Adjust to F15h, simplify code, fixup macros.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-03-17 14:46:12 +01:00
Borislav Petkov 7f19bf755c amd64_edac: Remove DRAM base/limit subfields caching
Add a struct representing the DRAM base/limit range pairs and remove all
cached subfields. Replace them with accessor functions, which actually
saves us some space:

   text    data     bss     dec     hex filename
  14712    1577     336   16625    40f1 drivers/edac/amd64_edac_mod.o.after
  14831    1609     336   16776    4188 drivers/edac/amd64_edac_mod.o.before

Also, it simplifies the code a lot allowing to merge the K8 and F10h
routines.

No functional change.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-03-17 14:46:11 +01:00
Borislav Petkov b2b0c60543 amd64_edac: Add support for F15h DCT PCI config accesses
F15h "multiplexes" between the configuration space of the two DRAM
controllers by toggling D18F1x10C[DctCfgSel] while F10h has a different
set of registers for DCT0, and DCT1 in extended PCI config space.

Add DCT configuration space accessors per family thus wrapping all the
different access prerequisites. Clean up code while at it, shorten
names.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-03-17 14:46:11 +01:00
Borislav Petkov 390944439f EDAC: Fixup scrubrate manipulation
Make the ->{get|set}_sdram_scrub_rate return the actual scrub rate
bandwidth it succeeded setting and remove superfluous arg pointer used
for that. A negative value returned still means that an error occurred
while setting the scrubrate. Document this for future reference.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07 11:38:31 +01:00
Borislav Petkov ae7bb7c679 amd64_edac: Carve out ECC-related hw settings
This is in preparation for the init path reorganization where we want
only to

1) test whether a particular node supports ECC
2) can it be enabled

and only then do the necessary allocation/initialization. For that,
we need to decouple the ECC settings of the node from the instance's
descriptor.

The should be no functional change introduced by this patch.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07 11:34:00 +01:00
Borislav Petkov f1db274e1b amd64_edac: Remove PCI ECS enabling functions
PCI ECS is being enabled by default since 2.6.26 on AMD so this code is
just superfluous now, remove it.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07 11:33:59 +01:00
Borislav Petkov cc4d8860fc amd64_edac: Allocate driver instances dynamically
Remove static allocation in favor of dynamically allocating space for as
many driver instances as northbridges present on the system.

There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07 11:33:57 +01:00
Borislav Petkov 24f9a7fe3f amd64_edac: Rework printk macros
Add a macro per printk level, shorten up error messages. Add relevant
information to KERN_INFO level. No functional change.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07 11:33:56 +01:00
Borislav Petkov 8d5b5d9c7b amd64_edac: Rename CPU PCI devices
Rename variables representing PCI devices to their BKDG names for faster
search and shorter, clearer code.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07 11:33:54 +01:00
Borislav Petkov b8cfa02f83 amd64_edac: Concentrate per-family init even more
Move the remaining per-family init code into the proper place and
simplify the rest of the initialization. Reorganize error handling in
amd64_init_one_instance().

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07 11:33:53 +01:00
Borislav Petkov 0092b20d4c amd64_edac: Simplify CPU family detection
Concentrate CPU family detection in the per-family init function.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07 11:33:51 +01:00