Граф коммитов

1157 Коммитов

Автор SHA1 Сообщение Дата
Mauro Carvalho Chehab c41afdca29 sb_edac: Fix mix tab/spaces alignments
We should not have spaces before ^I on alignments.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-26 15:47:00 -03:00
Aristeu Rozanski 7b8278358c edac: add DDR4 and RDDR4
Haswell memory controller can make use of DDR4 and Registered DDR4

Cc: tony.luck@intel.com
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-26 15:46:55 -03:00
Aristeu Rozanski adc61bcd91 sb_edac: remove bogus assumption on mc ordering
When a MC is handled, the correct sbridge_dev is searched based on the node,
checking again later with the assumption the first memory controller found is
the first socket's memory controller is a bogus assumption. Get rid of it.

Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-26 15:46:51 -03:00
Aristeu Rozanski d7c660b7dc sb_edac: make minimal use of channel_mask
channel_mask will be used in the future to determine which group of memory
modules is causing the errors since when mirroring, lockstep and close page
are enabled you can't. While that doesn't happen, use the channel_mask to
determine the channel instead of relying on the MC event/exception.

Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-26 15:46:46 -03:00
Aristeu Rozanski 2ff3a308b5 sb_edac: fix socket detection on Ivy Bridge controllers
This patch fixes the obvious bug while handling the socket/HA bitmask used in
Ivy Bridge memory controllers.

Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-26 15:46:42 -03:00
Aristeu Rozanski 66ca727491 sb_edac: update Kconfig description
Kconfig wasn't updated when Ivy Bridge support was added.

Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-26 15:46:37 -03:00
Aristeu Rozanski dbc954dddd sb_edac: search devices using product id
This patch changes the way devices are searched by using product id instead of
device/function numbers. Tested in a Sandy Bridge and a Ivy Bridge machine to
make sure everything works properly.

Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-26 15:46:33 -03:00
Aristeu Rozanski b976bcf249 sb_edac: make RIR limit retrieval per model
Haswell has a different way to retrieve RIR limits, make this procedure per
model.

Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-26 15:46:29 -03:00
Aristeu Rozanski f14d6892e4 sb_edac: make node id retrieval per model
Haswell has a different way to retrieve the node id, make so this procedure
can be reimplemented.

Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-26 15:46:25 -03:00
Aristeu Rozanski 9e37544615 sb_edac: make memory type detection per memory controller
Haswell has different register, offset to determine memory type and supports
DDR4 in some models. This patch makes it easier to have a different method
depending on the memory controller type.

Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-26 15:23:46 -03:00
Grant Likely ccdb8ed3b3 of: Migrate of_find_node_by_name() users to for_each_node_by_name()
There are a bunch of users open coding the for_each_node_by_name() by
calling of_find_node_by_name() directly instead of using the macro. This
is getting in the way of some cleanups, and the possibility of removing
of_find_node_by_name() entirely. Clean it up so that all the users are
consistent.

Signed-off-by: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Takashi Iwai <tiwai@suse.de>
2014-06-26 17:12:24 +01:00
Fabian Frederick 6866b39056 EDAC, edac_module.c: Remove unnecessary test on unsigned value
unsigned long value is never < 0.

Cc: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Link: http://lkml.kernel.org/r/1402341618-10674-1-git-send-email-fabf@skynet.be
Signed-off-by: Borislav Petkov <bp@suse.de>
2014-06-24 15:13:08 +02:00
Chen, Gong 76ac8275f2 trace, RAS: Add basic RAS trace event
To avoid confuision and conflict of usage for RAS related trace event,
add an unified RAS trace event stub.

Start a RAS subsystem menu which will be fleshed out in time, when more
features get added to it.

Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
Link: http://lkml.kernel.org/r/1402475691-30045-2-git-send-email-gong.chen@linux.intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2014-06-23 10:12:19 -07:00
Linus Torvalds 425553209b PCI changes for the v3.16 merge window:
Enumeration
     - Notify driver before and after device reset (Keith Busch)
     - Use reset notification in NVMe (Keith Busch)
 
   NUMA
     - Warn if we have to guess host bridge node information (Myron Stowe)
     - Work around AMD Fam15h BIOSes that fail to provide _PXM (Suravee Suthikulpanit)
     - Clean up and mark early_root_info_init() as deprecated (Suravee Suthikulpanit)
 
   Driver binding
     - Add "driver_override" for force specific binding (Alex Williamson)
     - Fail "new_id" addition for devices we already know about (Bandan Das)
 
   Resource management
     - Support BAR sizes up to 8GB (Nikhil Rao, Alan Cox)
     - Don't move IORESOURCE_PCI_FIXED resources (Bjorn Helgaas)
     - Mark SBx00 HPET BAR as IORESOURCE_PCI_FIXED (Bjorn Helgaas)
     - Fail safely if we can't handle BARs larger than 4GB (Bjorn Helgaas)
     - Reject BAR above 4GB if dma_addr_t is too small (Bjorn Helgaas)
     - Don't convert BAR address to resource if dma_addr_t is too small (Bjorn Helgaas)
     - Don't set BAR to zero if dma_addr_t is too small (Bjorn Helgaas)
     - Don't print anything while decoding is disabled (Bjorn Helgaas)
     - Don't add disabled subtractive decode bus resources (Bjorn Helgaas)
     - Add resource allocation comments (Bjorn Helgaas)
     - Restrict 64-bit prefetchable bridge windows to 64-bit resources (Yinghai Lu)
     - Assign i82875p_edac PCI resources before adding device (Yinghai Lu)
 
   PCI device hotplug
     - Remove unnecessary "dev->bus" test (Bjorn Helgaas)
     - Use PCI_EXP_SLTCAP_PSN define (Bjorn Helgaas)
     - Fix rphahp endianess issues (Laurent Dufour)
     - Acknowledge spurious "cmd completed" event (Rajat Jain)
     - Allow hotplug service drivers to operate in polling mode (Rajat Jain)
     - Fix cpqphp possible NULL dereference (Rickard Strandqvist)
 
   MSI
     - Replace pci_enable_msi_block() by pci_enable_msi_exact() (Alexander Gordeev)
     - Replace pci_enable_msix() by pci_enable_msix_exact() (Alexander Gordeev)
     - Simplify populate_msi_sysfs() (Jan Beulich)
 
   Virtualization
     - Add Intel Patsburg (X79) root port ACS quirk (Alex Williamson)
     - Mark RTL8110SC INTx masking as broken (Alex Williamson)
 
   Generic host bridge driver
     - Add generic PCI host controller driver (Will Deacon)
 
   Freescale i.MX6
     - Use new clock names (Lucas Stach)
     - Drop old IRQ mapping (Lucas Stach)
     - Remove optional (and unused) IRQs (Lucas Stach)
     - Add support for MSI (Lucas Stach)
     - Fix imx6_add_pcie_port() section mismatch warning (Sachin Kamat)
 
   Renesas R-Car
     - Add gen2 device tree support (Ben Dooks)
     - Use new OF interrupt mapping when possible (Lucas Stach)
     - Add PCIe driver (Phil Edworthy)
     - Add PCIe MSI support (Phil Edworthy)
     - Add PCIe device tree bindings (Phil Edworthy)
 
   Samsung Exynos
     - Remove unnecessary OOM messages (Jingoo Han)
     - Fix add_pcie_port() section mismatch warning (Sachin Kamat)
 
   Synopsys DesignWare
     - Make MSI ISR shared IRQ aware (Lucas Stach)
 
   Miscellaneous
     - Check for broken config space aliasing (Alex Williamson)
     - Update email address (Ben Hutchings)
     - Fix Broadcom CNB20LE unintended sign extension (Bjorn Helgaas)
     - Fix incorrect vgaarb conditional in WARN_ON() (Bjorn Helgaas)
     - Remove unnecessary __ref annotations (Bjorn Helgaas)
     - Add arch/x86/kernel/quirks.c to MAINTAINERS PCI file patterns (Bjorn Helgaas)
     - Fix use of uninitialized MPS value (Bjorn Helgaas)
     - Tidy x86/gart messages (Bjorn Helgaas)
     - Fix return value from pci_user_{read,write}_config_*() (Gavin Shan)
     - Turn pcibios_penalize_isa_irq() into a weak function (Hanjun Guo)
     - Remove unused serial device IDs (Jean Delvare)
     - Use designated initialization in PCI_VDEVICE (Mark Rustad)
     - Fix powerpc NULL dereference in pci_root_buses traversal (Mike Qiu)
     - Configure MPS on ARM (Murali Karicheri)
     - Remove unnecessary includes of <linux/init.h> (Paul Gortmaker)
     - Move Open Firmware devspec attribute to PCI common code (Sebastian Ott)
     - Use pdev->dev.groups for attribute creation on s390 (Sebastian Ott)
     - Remove pcibios_add_platform_entries() (Sebastian Ott)
     - Add new ID for Intel GPU "spurious interrupt" quirk (Thomas Jarosch)
     - Rename pci_is_bridge() to pci_has_subordinate() (Yijing Wang)
     - Add and use new pci_is_bridge() interface (Yijing Wang)
     - Make pci_bus_add_device() void (Yijing Wang)
 
   DMA API
     - Clarify physical/bus address distinction in docs (Bjorn Helgaas)
     - Fix typos in docs (Emilio López)
     - Update dma_pool_create ()and dma_pool_alloc() descriptions (Gioh Kim)
     - Change dma_declare_coherent_memory() CPU address to phys_addr_t (Bjorn Helgaas)
     - Pass GAPSPCI_DMA_BASE CPU & bus address to dma_declare_coherent_memory() (Bjorn Helgaas)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJTjMaQAAoJEFmIoMA60/r8XncQAKX7cD6btXCZnrcYo7inseyp
 3rwOlrsNkWyHqSj/RqqzE1NY6L1h5G2uliI6xg1SKenuHPDcosm5d8FYO0ORKiUs
 xrqBkmZJHXN7fck//tJwsTXiYh5u42RO8QWbvZVr5UqXe40LyaMHMh9Y7VarrU/o
 sM2ADzFKagv1qMQ13nmYxqT+Zl+CqpimyLP+ep6Nfqxi6ils+KJ6b9SKYqrpqE6t
 Mcq2K5ShqU5SaYub1JIXLcQ9XylID+t1M9+cwixcs7a87HbJiktfkGqQvQJoUIuK
 Q5U+abcIGk4vfOnDCctSnoRyrcbTAZ/vqfo0vpX22TokESjwrD8hFOX5HPOFtD+4
 wIDbYurW/8oBhLRaJ0uTPzSH8bXjXTynAwxHZgIrEur5908eECKQ/WiFCxyrovvv
 r4ThAN0FaobllEr0XOFESOzDNSt/ME00WWI7+puAJ/KJkFEtcXt9othLmLmvLz8H
 2GWXrm/aOR0WUO7foGUxI3bXYlDN6NbSKpfuZsLAi2VAyJJ6L6yVSo/fT0X07e3z
 qRy9LOohuiwIKv/I4F2SEq2REfGGsnkrJBoeQi/oBZDcBy1Lsi7P9LWIERhLQEM+
 Hm+30lC/f326nI3hoyThj2k2xxZOQzCIvrt658xP4qd9Zfe1bvCH58FF8K62CoOd
 p8XAf7Sl6v6YUodUrT/t
 =km55
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into next

Pull PCI changes from Bjorn Helgaas:
 "Enumeration
    - Notify driver before and after device reset (Keith Busch)
    - Use reset notification in NVMe (Keith Busch)

  NUMA
    - Warn if we have to guess host bridge node information (Myron Stowe)
    - Work around AMD Fam15h BIOSes that fail to provide _PXM (Suravee
      Suthikulpanit)
    - Clean up and mark early_root_info_init() as deprecated (Suravee
      Suthikulpanit)

  Driver binding
    - Add "driver_override" for force specific binding (Alex Williamson)
    - Fail "new_id" addition for devices we already know about (Bandan
      Das)

  Resource management
    - Support BAR sizes up to 8GB (Nikhil Rao, Alan Cox)
    - Don't move IORESOURCE_PCI_FIXED resources (Bjorn Helgaas)
    - Mark SBx00 HPET BAR as IORESOURCE_PCI_FIXED (Bjorn Helgaas)
    - Fail safely if we can't handle BARs larger than 4GB (Bjorn Helgaas)
    - Reject BAR above 4GB if dma_addr_t is too small (Bjorn Helgaas)
    - Don't convert BAR address to resource if dma_addr_t is too small
      (Bjorn Helgaas)
    - Don't set BAR to zero if dma_addr_t is too small (Bjorn Helgaas)
    - Don't print anything while decoding is disabled (Bjorn Helgaas)
    - Don't add disabled subtractive decode bus resources (Bjorn Helgaas)
    - Add resource allocation comments (Bjorn Helgaas)
    - Restrict 64-bit prefetchable bridge windows to 64-bit resources
      (Yinghai Lu)
    - Assign i82875p_edac PCI resources before adding device (Yinghai Lu)

  PCI device hotplug
    - Remove unnecessary "dev->bus" test (Bjorn Helgaas)
    - Use PCI_EXP_SLTCAP_PSN define (Bjorn Helgaas)
    - Fix rphahp endianess issues (Laurent Dufour)
    - Acknowledge spurious "cmd completed" event (Rajat Jain)
    - Allow hotplug service drivers to operate in polling mode (Rajat Jain)
    - Fix cpqphp possible NULL dereference (Rickard Strandqvist)

  MSI
    - Replace pci_enable_msi_block() by pci_enable_msi_exact()
      (Alexander Gordeev)
    - Replace pci_enable_msix() by pci_enable_msix_exact() (Alexander Gordeev)
    - Simplify populate_msi_sysfs() (Jan Beulich)

  Virtualization
    - Add Intel Patsburg (X79) root port ACS quirk (Alex Williamson)
    - Mark RTL8110SC INTx masking as broken (Alex Williamson)

  Generic host bridge driver
    - Add generic PCI host controller driver (Will Deacon)

  Freescale i.MX6
    - Use new clock names (Lucas Stach)
    - Drop old IRQ mapping (Lucas Stach)
    - Remove optional (and unused) IRQs (Lucas Stach)
    - Add support for MSI (Lucas Stach)
    - Fix imx6_add_pcie_port() section mismatch warning (Sachin Kamat)

  Renesas R-Car
    - Add gen2 device tree support (Ben Dooks)
    - Use new OF interrupt mapping when possible (Lucas Stach)
    - Add PCIe driver (Phil Edworthy)
    - Add PCIe MSI support (Phil Edworthy)
    - Add PCIe device tree bindings (Phil Edworthy)

  Samsung Exynos
    - Remove unnecessary OOM messages (Jingoo Han)
    - Fix add_pcie_port() section mismatch warning (Sachin Kamat)

  Synopsys DesignWare
    - Make MSI ISR shared IRQ aware (Lucas Stach)

  Miscellaneous
    - Check for broken config space aliasing (Alex Williamson)
    - Update email address (Ben Hutchings)
    - Fix Broadcom CNB20LE unintended sign extension (Bjorn Helgaas)
    - Fix incorrect vgaarb conditional in WARN_ON() (Bjorn Helgaas)
    - Remove unnecessary __ref annotations (Bjorn Helgaas)
    - Add arch/x86/kernel/quirks.c to MAINTAINERS PCI file patterns
      (Bjorn Helgaas)
    - Fix use of uninitialized MPS value (Bjorn Helgaas)
    - Tidy x86/gart messages (Bjorn Helgaas)
    - Fix return value from pci_user_{read,write}_config_*() (Gavin Shan)
    - Turn pcibios_penalize_isa_irq() into a weak function (Hanjun Guo)
    - Remove unused serial device IDs (Jean Delvare)
    - Use designated initialization in PCI_VDEVICE (Mark Rustad)
    - Fix powerpc NULL dereference in pci_root_buses traversal (Mike Qiu)
    - Configure MPS on ARM (Murali Karicheri)
    - Remove unnecessary includes of <linux/init.h> (Paul Gortmaker)
    - Move Open Firmware devspec attribute to PCI common code (Sebastian Ott)
    - Use pdev->dev.groups for attribute creation on s390 (Sebastian Ott)
    - Remove pcibios_add_platform_entries() (Sebastian Ott)
    - Add new ID for Intel GPU "spurious interrupt" quirk (Thomas Jarosch)
    - Rename pci_is_bridge() to pci_has_subordinate() (Yijing Wang)
    - Add and use new pci_is_bridge() interface (Yijing Wang)
    - Make pci_bus_add_device() void (Yijing Wang)

  DMA API
    - Clarify physical/bus address distinction in docs (Bjorn Helgaas)
    - Fix typos in docs (Emilio López)
    - Update dma_pool_create ()and dma_pool_alloc() descriptions (Gioh Kim)
    - Change dma_declare_coherent_memory() CPU address to phys_addr_t
      (Bjorn Helgaas)
    - Pass GAPSPCI_DMA_BASE CPU & bus address to dma_declare_coherent_memory()
      (Bjorn Helgaas)"

* tag 'pci-v3.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (92 commits)
  MAINTAINERS: Add generic PCI host controller driver
  PCI: generic: Add generic PCI host controller driver
  PCI: imx6: Add support for MSI
  PCI: designware: Make MSI ISR shared IRQ aware
  PCI: imx6: Remove optional (and unused) IRQs
  PCI: imx6: Drop old IRQ mapping
  PCI: imx6: Use new clock names
  i82875p_edac: Assign PCI resources before adding device
  ARM/PCI: Call pcie_bus_configure_settings() to set MPS
  PCI: imx6: Fix imx6_add_pcie_port() section mismatch warning
  PCI: Make pci_bus_add_device() void
  PCI: exynos: Fix add_pcie_port() section mismatch warning
  PCI: Introduce new device binding path using pci_dev.driver_override
  PCI: rcar: Add gen2 device tree support
  PCI: cpqphp: Fix possible null pointer dereference
  PCI: rcar: Add R-Car PCIe device tree bindings
  PCI: rcar: Add MSI support for PCIe
  PCI: rcar: Add Renesas R-Car PCIe driver
  PCI: Fix return value from pci_user_{read,write}_config_*()
  PCI: exynos: Remove unnecessary OOM messages
  ...
2014-06-02 12:15:19 -07:00
Bjorn Helgaas 617b4157a5 Merge branches 'pci/host-exynos', 'pci/host-imx6', 'pci/resource' and 'pci/misc' into next
* pci/host-exynos:
  PCI: exynos: Fix add_pcie_port() section mismatch warning

* pci/host-imx6:
  PCI: imx6: Add support for MSI
  PCI: designware: Make MSI ISR shared IRQ aware
  PCI: imx6: Remove optional (and unused) IRQs
  PCI: imx6: Drop old IRQ mapping
  PCI: imx6: Use new clock names
  PCI: imx6: Fix imx6_add_pcie_port() section mismatch warning

* pci/resource:
  i82875p_edac: Assign PCI resources before adding device

* pci/misc:
  ARM/PCI: Call pcie_bus_configure_settings() to set MPS
  PCI: Make pci_bus_add_device() void

Conflicts:
	drivers/edac/i82875p_edac.c
2014-05-30 11:41:17 -06:00
Yinghai Lu 06b00514b7 i82875p_edac: Assign PCI resources before adding device
Assign PCI resources before pci_bus_add_device().  The resources must be
assigned before a driver can claim the device.

[bhelgaas: changelog]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-05-30 10:56:46 -06:00
Yijing Wang c893d133ea PCI: Make pci_bus_add_device() void
pci_bus_add_device() always returns 0, so there's no point in returning
anything at all.  Make it a void function and remove the tests of the
return value from the callers.

[bhelgaas: changelog, remove unused "err" from i82875p_setup_overfl_dev()]
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-05-30 09:34:27 -06:00
Loc Ho aa2064d7dd EDAC: Fix MC scrub mode comparsion bug for correctable errors
The MC structure field scrub_mode is of integer type - not bit field.
Use it accordingly.

Signed-off-by: Loc Ho <lho@apm.com>
Link: http://lkml.kernel.org/r/1399590199-12256-2-git-send-email-lho@apm.com
Signed-off-by: Borislav Petkov <bp@suse.de>
2014-05-09 09:35:04 +02:00
Borislav Petkov c5c0903b2c EDAC, MCE, AMD: Remove leftover unused mask
295d8cda26 ("EDAC, MCE, AMD: Drop local coreid reporting") removed the
code snippet which used that mask but forgot to drop the mask itself. Do
that now.

Signed-off-by: Borislav Petkov <bp@suse.de>
2014-05-08 20:37:07 +02:00
Linus Torvalds 3c83e61e67 Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
 "The main set of series of patches for media subsystem, including:
   - document RC sysfs class
   - added an API to setup scancode to allow waking up systems using the
     Remote Controller
   - add API for SDR devices.  Drivers are still on staging
   - some API improvements for getting EDID data from media
     inputs/outputs
   - new DVB frontend driver for drx-j (ATSC)
   - one driver (it913x/it9137) got removed, in favor of an improvement
     on another driver (af9035)
   - added a skeleton V4L2 PCI driver at documentation
   - added a dual flash driver (lm3646)
   - added a new IR driver (img-ir)
   - added an IR scancode decoder for the Sharp protocol
   - some improvements at the usbtv driver, to allow its core to be
     reused.
   - added a new SDR driver (rtl2832u_sdr)
   - added a new tuner driver (msi001)
   - several improvements at em28xx driver to fix PM support, device
     removal and to split the V4L2 specific bits into a separate
     sub-driver
   - one driver got converted to videobuf2 (s2255drv)
   - the e4000 tuner driver now follows an improved binding model
   - some fixes at V4L2 compat32 code
   - several fixes and enhancements at videobuf2 code
   - some cleanups at V4L2 API documentation
   - usual driver enhancements, new board additions and misc fixups"

[ NOTE! This merge effective drops commit 4329b93b28 ("of: Reduce
  indentation in of_graph_get_next_endpoint").

  The of_graph_get_next_endpoint() function was moved and renamed by
  commit fd9fdb78a9 ("[media] of: move graph helpers from
  drivers/media/v4l2-core to drivers/of").  It was originally called
  v4l2_of_get_next_endpoint() and lived in the file
  drivers/media/v4l2-core/v4l2-of.c.

  In that original location, it was then fixed to support empty port
  nodes by commit b9db140c1e ("[media] v4l: of: Support empty port
  nodes"), and that commit clashes badly with the dropped "Reduce
  intendation" commit.  I had to choose one or the other, and decided
  that the "Support empty port nodes" commit was more important ]

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (426 commits)
  [media] em28xx-dvb: fix PCTV 461e tuner I2C binding
  Revert "[media] em28xx-dvb: fix PCTV 461e tuner I2C binding"
  [media] em28xx: fix PCTV 290e LNA oops
  [media] em28xx-dvb: fix PCTV 461e tuner I2C binding
  [media] m88ds3103: fix bug on .set_tone()
  [media] saa7134: fix WARN_ON during resume
  [media] v4l2-dv-timings: add module name, description, license
  [media] videodev2.h: add parenthesis around macro arguments
  [media] saa6752hs: depends on CRC32
  [media] si4713: fix Kconfig dependencies
  [media] Sensoray 2255 uses videobuf2
  [media] adv7180: free an interrupt on failure paths in init_device()
  [media] e4000: make VIDEO_V4L2 dependency optional
  [media] af9033: Don't export functions for the hardware filter
  [media] af9035: use af9033 PID filters
  [media] af9033: implement PID filter
  [media] rtl2832_sdr: do not use dynamic stack allocation
  [media] e4000: fix 32-bit build error
  [media] em28xx-audio: make sure audio is unmuted on open()
  [media] DocBook media: v4l2_format_sdr was renamed to v4l2_sdr_format
  ...
2014-04-04 09:50:07 -07:00
Linus Torvalds 4a4389abdd Merge branch 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac
Pull sb_edac patches from Mauro Carvalho Chehab:
 "A couple sb_edac driver improvements, cleaning a little bit the amount
  of data sent to dmesg, and fixing one error message"

* 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac:
  sb_edac: mark MCE messages as KERN_DEBUG
  sb_edac: use "event" instead of "exception" when MC wasnt signaled
2014-04-03 17:07:17 -07:00
Linus Torvalds bdfc7cbdee Merge branch 'mips-for-linux-next' of git://git.linux-mips.org/pub/scm/ralf/upstream-sfr
Pull MIPS updates from Ralf Baechle:
 - Support for Imgtec's Aptiv family of MIPS cores.
 - Improved detection of BCM47xx configurations.
 - Fix hiberation for certain configurations.
 - Add support for the Chinese Loongson 3 CPU, a MIPS64 R2 core and
   systems.
 - Detection and support for the MIPS P5600 core.
 - A few more random fixes that didn't make 3.14.
 - Support for the EVA Extended Virtual Addressing
 - Switch Alchemy to the platform PATA driver
 - Complete unification of Alchemy support
 - Allow availability of I/O cache coherency to be runtime detected
 - Improvments to multiprocessing support for Imgtec platforms
 - A few microoptimizations
 - Cleanups of FPU support
 - Paul Gortmaker's fixes for the init stuff
 - Support for seccomp

* 'mips-for-linux-next' of git://git.linux-mips.org/pub/scm/ralf/upstream-sfr: (165 commits)
  MIPS: CPC: Use __raw_ memory access functions
  MIPS: CM: use __raw_ memory access functions
  MIPS: Fix warning when including smp-ops.h with CONFIG_SMP=n
  MIPS: Malta: GIC IPIs may be used without MT
  MIPS: smp-mt: Use common GIC IPI implementation
  MIPS: smp-cmp: Remove incorrect core number probe
  MIPS: Fix gigaton of warning building with microMIPS.
  MIPS: Fix core number detection for MT cores
  MIPS: MT: core_nvpes function to retrieve VPE count
  MIPS: Provide empty mips_mt_set_cpuoptions when CONFIG_MIPS_MT=n
  MIPS: Lasat: Replace del_timer by del_timer_sync
  MIPS: Malta: Setup PM I/O region on boot
  MIPS: Loongson: Add a Loongson-3 default config file
  MIPS: Loongson 3: Add CPU hotplug support
  MIPS: Loongson 3: Add Loongson-3 SMP support
  MIPS: Loongson: Add Loongson-3 Kconfig options
  MIPS: Loongson: Add swiotlb to support All-Memory DMA
  MIPS: Loongson 3: Add serial port support
  MIPS: Loongson 3: Add IRQ init and dispatch support
  MIPS: Loongson 3: Add HT-linked PCI support
  ...
2014-04-02 13:40:50 -07:00
Linus Torvalds 62ff577fa2 A bunch of EDAC updates all over the place:
* Support for new AMD models, along with more graceful fallback for
 unsupported hw.
 
 * Bunch of fixes from SUSE accumulated from bug reports
 
 * Misc other fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTMUueAAoJEBLB8Bhh3lVKbGIP/iXBanEUUXbg027hvNch8tbJ
 Yzsk3VkhmZ6hWXU4XNkvFFbSfCfHuHYQSEAxro6yc2t+6aVhMBrKIcCBNejNYt37
 louswtfhC9A4geX206bzfOFNxOVsWzX2vxhhQFbqybZe6BnmcnCSKn//v+kF0/5E
 6CrwQyKQjl2vGewPU4pBlrbnRNduPRs6bg6lWgzNxbKrhD8Ce/7NQRVd5v698pNm
 NTqfS37J90o1DP3I6yY30trtprPjjfnFANxb2DPaf09Z/X+aI1ONNe4s/URBd+qg
 yYIWAphbKopXPZOS0wDU0ikb7dGWH1lcQdVE69GxnCEvz9hz2ISg3plguwbYLPzK
 CmI4RGU0D8n5Irxu8bUID4SLT6fSAqU+cgJCdu6dqUncB7khcwG8dWJxMYNGjlBm
 TD9aCRRs+/b07KUrBeL1tufgd9gGPKWDeecTw55VMofIFkYvwIAz8TFdj3ql4Uz/
 AsYJkAqvoO4dTz1ai+PJ06EWSijUT+KLkyZbybS5+PiP4uRAWY8pkCKbvTJQb1xN
 0SAwm0tqT7mQKc/oIsvpZ/TLjwYxRhAeVMvrkElkNRPSsrt70rDVQiPgzQh9GTqV
 d5GmYI65Tk2Jrl7dVN+Pk+NDdS/y52SPk1AMDsfoBP6dndftdF6/gtqnijmbLgMY
 /yH+hIAKJXJUUKO4pELe
 =vafk
 -----END PGP SIGNATURE-----

Merge tag 'edac_for_3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp

Pull EDAC updates from Borislav Petkov:
 "A bunch of EDAC updates all over the place:

   - Support for new AMD models, along with more graceful fallback for
     unsupported hw.

   - Bunch of fixes from SUSE accumulated from bug reports

   - Misc other fixes and cleanups"

* tag 'edac_for_3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  amd64_edac: Add support for newer F16h models
  i7core_edac: Drop unused variable
  i82875p_edac: Drop redundant call to pci_get_device()
  amd8111_edac: Fix leaks in probe error paths
  e752x_edac: Drop pvt->bridge_ck
  MCE, AMD: Fix decoding module loading on unsupported hw
  i5100_edac: Remove an unneeded condition in i5100_init_csrows()
  sb_edac: Degrade log level for device registration
  amd64_edac: Fix logic to determine channel for F15 M30h processors
  edac/85xx: Remove deprecated IRQF_DISABLED
  i3200_edac: Add a missing pci_disable_device() on the exit path
  i5400_edac: Disable device when unloading module
  e752x_edac: Simplify call to pci_get_device()
2014-04-01 13:54:00 -07:00
Daniel Walker 1bc021e815 EDAC: Octeon: Add error injection support
This adds an ad-hoc error injection method. Octeon II doesn't have
hardware support for injection, so this simulates it.

Signed-off-by: Daniel Walker <dwalker@fifo99.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: linux-edac@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/5873/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-31 18:17:12 +02:00
Daniel Walker 5331de0570 EDAC: Octeon: Fix lack of opstate_init
If the opstate_init() isn't called the driver won't start properly.

I just added it in what appears to be an appropriate place.

Signed-off-by: Daniel Walker <dwalker@fifo99.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: linux-edac@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/5872/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-31 18:17:12 +02:00
Aristeu Rozanski 49856dc973 sb_edac: mark MCE messages as KERN_DEBUG
Since the driver is decoding the MCE, it's useless to have these
messages printed unless you're debugging a problem in the driver.

Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-13 09:52:09 -03:00
Aristeu Rozanski cf40f80cbe sb_edac: use "event" instead of "exception" when MC wasnt signaled
Corrected Errors are MC events, not exceptions and reporting as the
later might confuse users.

Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-13 09:52:01 -03:00
Mauro Carvalho Chehab c897df0e2d Linux 3.14-rc5
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJTE+9XAAoJEHm+PkMAQRiGrMQIAKI2V49Kj8WlnwGchFvsbGJB
 SLALwNi33T/IBKdZRhrfryBu02Zj7eVvZ2ML35dJEnmF88O+dJBDMTkKV1xalrip
 mtkBrjUnfAI04fq/daLQ1TsAy4qqlra5tSTuDCw8ILOnGPwT0VydIEHNdtmoUIfw
 xlZLxHzny1MslZ78d7uR/cUnV9ylKRRajWzfw1HT8hL51fCt8nRWY0sCvwvl+kMJ
 LsK+6I7mHDUuzA7QBmBI+dhzQgos5+JkkrnpmqHAqwmIh+AI3ksmjUCQ4dM7owrO
 IvEx+ZNDqxAdLcm1WAxATNfxddFXHc62JTvKuuKqTVWuaxVfK1Aqt8MjDMIPeAQ=
 =yV5u
 -----END PGP SIGNATURE-----

Merge tag 'v3.14-rc5' into patchwork

Linux 3.14-rc5

* tag 'v3.14-rc5': (1117 commits)
  Linux 3.14-rc5
  drm/vmwgfx: avoid null pointer dereference at failure paths
  drm/vmwgfx: Make sure backing mobs are cleared when allocated. Update driver date.
  drm/vmwgfx: Remove some unused surface formats
  MAINTAINERS: add maintainer entry for Armada DRM driver
  arm64: Fix !CONFIG_SMP kernel build
  arm64: mm: Add double logical invert to pte accessors
  dm cache: fix truncation bug when mapping I/O to >2TB fast device
  perf tools: Fix strict alias issue for find_first_bit
  powerpc/powernv: Fix indirect XSCOM unmangling
  powerpc/powernv: Fix opal_xscom_{read,write} prototype
  powerpc/powernv: Refactor PHB diag-data dump
  powerpc/powernv: Dump PHB diag-data immediately
  powerpc: Increase stack redzone for 64-bit userspace to 512 bytes
  powerpc/ftrace: bugfix for test_24bit_addr
  powerpc/crashdump : Fix page frame number check in copy_oldmem_page
  powerpc/le: Ensure that the 'stop-self' RTAS token is handled correctly
  kvm, vmx: Really fix lazy FPU on nested guest
  perf tools: fix BFD detection on opensuse
  drm/radeon: enable speaker allocation setup on dce3.2
  ...
2014-03-11 06:55:49 -03:00
Aravind Gopalakrishnan 85a8885bd0 amd64_edac: Add support for newer F16h models
Extend ECC decoding support for F16h M30h. Tested on F16h M30h with ECC
turned on using mce_amd_inj module and the patch works fine.

Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Link: http://lkml.kernel.org/r/1392913726-16961-1-git-send-email-Aravind.Gopalakrishnan@amd.com
Tested-by: Arindam Nath <Arindam.Nath@amd.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
2014-02-27 18:03:16 +01:00
Jean Delvare f118920baf i7core_edac: Drop unused variable
Fix the following warning:

drivers/edac/i7core_edac.c: In function "core_mce_output_error":
drivers/edac/i7core_edac.c:1711:8: warning: variable "type" set but not used [-Wunused-but-set-variable]
  char *type, *optype, *err;
        ^
According to Mauro, type can just be dropped, as tp_event now maps if
the error is corrected, uncorrected non-fatal or uncorrected fatal
one.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Link: http://lkml.kernel.org/r/20140224171358.692d7e5a@endymion.delvare
Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
2014-02-25 10:22:34 +01:00
Jean Delvare 5fdae41900 i82875p_edac: Drop redundant call to pci_get_device()
The first call to pci_get_device() in i82875p_probe1() is useless. The
result is immediately reset at the beginning of
i82875p_setup_overfl_dev(), which then issues the same
pci_get_device() call. Dropping the redundant call avoids a device
reference leak.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Link: http://lkml.kernel.org/r/20140224160316.60e55fb6@endymion.delvare
Cc: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
2014-02-25 10:13:46 +01:00
Jean Delvare 5576fb8696 amd8111_edac: Fix leaks in probe error paths
Both probe error paths are incomplete and leak memory and device
references. Add the missing cleanups.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Link: http://lkml.kernel.org/r/20140224154534.5a3b797a@endymion.delvare
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
2014-02-25 10:09:09 +01:00
Jean Delvare 0e089c1828 e752x_edac: Drop pvt->bridge_ck
pvt->bridge_ck always points to the same device as pvt->dev_d0f1, so
get rid of the former and only use the latter.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Tested-by: Aristeu Rozanski <aris@redhat.com>
Link: http://lkml.kernel.org/r/20140224151544.16ba28a0@endymion.delvare
Cc: Mark Gross <mark.gross@intel.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
2014-02-25 10:01:30 +01:00
Jean Delvare 75135da0d6 i7300_edac: Fix device reference count
pci_get_device() decrements the reference count of "from" (last
argument) so when we break off the loop successfully we have only one
device reference - and we don't know which device we have. If we want
a reference to each device, we must take them explicitly and let
the pci_get_device() walk complete to avoid duplicate references.

This is serious, as over-putting device references will cause
the device to eventually disappear. Without this fix, the kernel
crashes after a few insmod/rmmod cycles.

Tested on an Intel S7000FC4UR system with a 7300 chipset.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Link: http://lkml.kernel.org/r/20140224111656.09bbb7ed@endymion.delvare
Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: stable@vger.kernel.org
Signed-off-by: Borislav Petkov <bp@suse.de>
2014-02-25 09:43:13 +01:00
Jean Delvare c0f5eeed0f i7core_edac: Fix PCI device reference count
The reference count changes done by pci_get_device can be a little
misleading when the usage diverges from the most common scheme. The
reference count of the device passed as the last parameter is always
decreased, even if the function returns no new device. So if we are
going to try alternative device IDs, we must manually increment the
device reference count before each retry. If we don't, we end up
decreasing the reference count, and after a few modprobe/rmmod cycles
the PCI devices will vanish.

In other words and as Alan put it: without this fix the EDAC code
corrupts the PCI device list.

This fixes kernel bug #50491:
https://bugzilla.kernel.org/show_bug.cgi?id=50491

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Link: http://lkml.kernel.org/r/20140224093927.7659dd9d@endymion.delvare
Reviewed-by: Alan Cox <alan@linux.intel.com>
Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: stable@vger.kernel.org
Signed-off-by: Borislav Petkov <bp@suse.de>
2014-02-25 08:54:45 +01:00
Borislav Petkov fd0f5ffff8 MCE, AMD: Fix decoding module loading on unsupported hw
We want to still be able to issue some error information on systems for
which there is no decoding support (think older distro kernels here,
for example). Therefore, we allow module registration but skip the
per-family bank-specific decoders and issue the general information
only, i.e.:

[   46.822828] [Hardware Error]: Error Status: Uncorrected, software containable error.
[   46.822846] [Hardware Error]: CPU:0 (15:30:0) MC0_STATUS[-|UE|-|-|-|-|-]: 0xa000000000010f0f
[   46.822858] [Hardware Error]: cache level: L3/GEN, mem/io: GEN, mem-tx: GEN, part-proc: GEN (timed out)

with the hope that it still contains helpful useful bits.

Suggested-by: Aravind Gopalakrishnan <aravind.gopalakrishnan@amd.com>
Tested-by: Aravind Gopalakrishnan <aravind.gopalakrishnan@amd.com>
Link: http://lkml.kernel.org/r/1392659391-2411-1-git-send-email-Aravind.Gopalakrishnan@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
2014-02-24 10:25:47 +01:00
Dan Carpenter 9d6c7cbe30 i5100_edac: Remove an unneeded condition in i5100_init_csrows()
We checked that "npages" was not zero a couple lines earlier so we can
remove this and pull the code in one indent level.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: http://lkml.kernel.org/r/20140213111738.GB15549@elgon.mountain
Signed-off-by: Borislav Petkov <bp@suse.de>
2014-02-20 11:52:58 +01:00
Jiang Liu ec5a0b3824 sb_edac: Degrade log level for device registration
On a system with four Intel processors, it generates too many messages
"EDAC sbridge: Seeking for: dev 1d.3 PCI ID xxxx". And it doesn't give
many useful information for normal users, so change log level from INFO
to DEBUG.

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Link: http://lkml.kernel.org/r/1392613824-11230-1-git-send-email-jiang.liu@linux.intel.com
Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
2014-02-20 11:42:36 +01:00
Borislav Petkov cb6ef42e51 EDAC: Correct workqueue setup path
We're using edac_mc_workq_setup() both on the init path, when
we load an edac driver and when we change the polling period
(edac_mc_reset_delay_period) through /sys/.../edac_mc_poll_msec.

On that second path we don't need to init the workqueue which has been
initialized already.

Thanks to Tejun for workqueue insights.

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1391457913-881-1-git-send-email-prarit@redhat.com
Cc: <stable@vger.kernel.org>
2014-02-14 10:40:47 +01:00
Borislav Petkov 9da21b1509 EDAC: Poll timeout cannot be zero, p2
Sanitize code even more to accept unsigned longs only and to not allow
polling intervals below 1 second as this is unnecessary and doesn't make
much sense anyway for polling errors.

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1391457913-881-1-git-send-email-prarit@redhat.com
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: <stable@vger.kernel.org>
2014-02-14 10:40:29 +01:00
Prarit Bhargava 79040cad3f drivers/edac/edac_mc_sysfs.c: poll timeout cannot be zero
If you do

  echo 0 > /sys/module/edac_core/parameters/edac_mc_poll_msec

the following stack trace is output because the edac module is not
designed to poll with a timeout of zero.

  WARNING: CPU: 12 PID: 0 at lib/list_debug.c:33 __list_add+0xac/0xc0()
  list_add corruption. prev->next should be next (ffff8808291dd1b8), but was           (null). (prev=ffff8808286fe3f8).
  Modules linked in: sg nfsv3 rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache cfg80211 rfkill x86_pkg_temp_thermal coretemp kvm_intel kvm ixgbe e1000e crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd iTCO_wdt ptp sb_edac iTCO_vendor_support pps_core mdio ipmi_devintf edac_core ioatdma microcode shpchp lpc_ich pcspkr i2c_i801 dca mfd_core ipmi_si wmi ipmi_msghandler nfsd auth_rpcgss nfs_acl lockd sunrpc xfs libcrc32c sd_mod sr_mod cdrom crc_t10dif crct10dif_common mgag200 syscopyarea sysfillrect sysimgblt isci i2c_algo_bit drm_kms_helper ttm drm libsas ahci libahci scsi_transport_sas libata i2c_core dm_mirror dm_region_hash dm_log dm_mod
  CPU: 12 PID: 0 Comm: swapper/12 Not tainted 3.13.0+ #1
  Hardware name: Intel Corporation LH Pass ........../SVRBD-ROW_T, BIOS SE5C600.86B.01.08.0003.022620131521 02/26/2013
  Call Trace:
   <IRQ>
    __list_add+0xac/0xc0
    __internal_add_timer+0xab/0x130
    internal_add_timer+0x17/0x40
    mod_timer_pinned+0xca/0x170
    intel_pstate_timer_func+0x28a/0x380
    call_timer_fn+0x36/0x100
    run_timer_softirq+0x1ff/0x2f0
    __do_softirq+0xf5/0x2e0
    irq_exit+0x10d/0x120
    smp_apic_timer_interrupt+0x45/0x60
    apic_timer_interrupt+0x6d/0x80
   <EOI>
    cpuidle_idle_call+0xb9/0x1f0
    arch_cpu_idle+0xe/0x30
    cpu_startup_entry+0x9e/0x240
    start_secondary+0x1e4/0x290

  kernel BUG at kernel/timer.c:1084!
  invalid opcode: 0000 [#1] SMP
  Modules linked in: sg nfsv3 rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache cfg80211 rfkill x86_pkg_temp_thermal coretemp kvm_intel kvm ixgbe e1000e crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd iTCO_wdt ptp sb_edac iTCO_vendor_support pps_core mdio ipmi_devintf edac_core ioatdma microcode shpchp lpc_ich pcspkr i2c_i801 dca mfd_core ipmi_si wmi ipmi_msghandler nfsd auth_rpcgss nfs_acl lockd sunrpc xfs libcrc32c sd_mod sr_mod cdrom crc_t10dif crct10dif_common mgag200 syscopyarea sysfillrect sysimgblt isci i2c_algo_bit drm_kms_helper ttm drm libsas ahci libahci scsi_transport_sas libata i2c_core dm_mirror dm_region_hash dm_log dm_mod
  CPU: 12 PID: 0 Comm: swapper/12 Tainted: G        W    3.13.0+ #1
  Hardware name: Intel Corporation LH Pass ........../SVRBD-ROW_T, BIOS SE5C600.86B.01.08.0003.022620131521 02/26/2013
  Call Trace:
   <IRQ>
    run_timer_softirq+0x245/0x2f0
    __do_softirq+0xf5/0x2e0
    irq_exit+0x10d/0x120
    smp_apic_timer_interrupt+0x45/0x60
    apic_timer_interrupt+0x6d/0x80
   <EOI>
    cpuidle_idle_call+0xb9/0x1f0
    arch_cpu_idle+0xe/0x30
    cpu_startup_entry+0x9e/0x240
    start_secondary+0x1e4/0x290
  RIP   cascade+0x93/0xa0

  WARNING: CPU: 36 PID: 1154 at kernel/workqueue.c:1461 __queue_delayed_work+0xed/0x1a0()
  Modules linked in: sg nfsv3 rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache cfg80211 rfkill x86_pkg_temp_thermal coretemp kvm_intel kvm ixgbe e1000e crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd iTCO_wdt ptp sb_edac iTCO_vendor_support pps_core mdio ipmi_devintf edac_core ioatdma microcode shpchp lpc_ich pcspkr i2c_i801 dca mfd_core ipmi_si wmi ipmi_msghandler nfsd auth_rpcgss nfs_acl lockd sunrpc xfs libcrc32c sd_mod sr_mod cdrom crc_t10dif crct10dif_common mgag200 syscopyarea sysfillrect sysimgblt isci i2c_algo_bit drm_kms_helper ttm drm libsas ahci libahci scsi_transport_sas libata i2c_core dm_mirror dm_region_hash dm_log dm_mod
  CPU: 36 PID: 1154 Comm: kworker/u481:3 Tainted: G        W    3.13.0+ #1
  Hardware name: Intel Corporation LH Pass ........../SVRBD-ROW_T, BIOS SE5C600.86B.01.08.0003.022620131521 02/26/2013
  Workqueue: edac-poller edac_mc_workq_function [edac_core]
  Call Trace:
    dump_stack+0x45/0x56
    warn_slowpath_common+0x7d/0xa0
    warn_slowpath_null+0x1a/0x20
    __queue_delayed_work+0xed/0x1a0
    queue_delayed_work_on+0x27/0x50
    edac_mc_workq_function+0x72/0xa0 [edac_core]
    process_one_work+0x17b/0x460
    worker_thread+0x11b/0x400
    kthread+0xd2/0xf0
    ret_from_fork+0x7c/0xb0

This patch adds a range check in the edac_mc_poll_msec code to check for 0.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-10 16:01:41 -08:00
Aravind Gopalakrishnan 9d0e8d8348 amd64_edac: Fix logic to determine channel for F15 M30h processors
Update current channel selection logic to include F15h, M30h memory
controllers.

Refer F15 M30h BKDG D18F2x110[7:6] (DRAM Controller Select Low)
(Link:http://support.amd.com/TechDocs/49125_15h_Models_30h-3Fh_BKDG.pdf)

Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Link: http://lkml.kernel.org/r/1390338216-3873-1-git-send-email-Aravind.Gopalakrishnan@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
2014-02-07 15:01:19 +01:00
Johannes Thumshirn e245e3b25f edac/85xx: Remove deprecated IRQF_DISABLED
Remove IRQF_DISABLED as it is a NOOP.

Signed-off-by: Johannes Thumshirn <johannes.thumshirn@men.de>
Link: http://lkml.kernel.org/r/1390293747-11185-1-git-send-email-johannes.thumshirn@men.de
Signed-off-by: Borislav Petkov <bp@suse.de>
2014-02-07 14:48:07 +01:00
Hitoshi Mitake b90fe1568f i3200_edac: Add a missing pci_disable_device() on the exit path
Currently, i3200_edac.c forgets to call pci_disable_device() during a
process of disabling device. This patch adds that call.

The problem was detected by Huqiu Liu.

Reported-by: Huqiu Liu <liuhq11@mails.tsinghua.edu.cn>
Signed-off-by: Hitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp>
Link: http://lkml.kernel.org/r/1389587178-10167-1-git-send-email-mitake.hitoshi@gmail.com
Signed-off-by: Borislav Petkov <bp@suse.de>
2014-02-07 11:34:55 +01:00
Aristeu Rozanski c2e650c49a i5400_edac: Disable device when unloading module
This was found by Huqiu Liu using a static analysis.

Reported-by: Huqiu Liu <liuhq11@mails.tsinghua.edu.cn>
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Link: http://lkml.kernel.org/r/20140116162021.GY15716@redhat.com
Signed-off-by: Borislav Petkov <bp@suse.de>
2014-02-07 11:28:49 +01:00
Mauro Carvalho Chehab 37e59f876b [media, edac] Change my email address
There are several left overs with my old email address.
Remove their occurrences and add myself at CREDITS, to
allow people to be able to reach me on my new addresses.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-07 08:03:07 -02:00
Jean Delvare 2edbf56997 e752x_edac: Simplify call to pci_get_device()
The last parameter, pvt->bridge_ck, is always NULL as far as I can
see, so just use that.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Link: http://lkml.kernel.org/r/20140130091101.22f2b550@endymion.delvare
Cc: Mark Gross <mark.gross@intel.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
2014-02-03 19:03:35 +01:00
Linus Torvalds fab5669d55 Merge branch 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 RAS changes from Ingo Molnar:

 - SCI reporting for other error types not only correctable ones

 - GHES cleanups

 - Add the functionality to override error reporting agents as some
   machines are sporting a new extended error logging capability which,
   if done properly in the BIOS, makes a corresponding EDAC module
   redundant

 - PCIe AER tracepoint severity levels fix

 - Error path correction for the mce device init

 - MCE timer fix

 - Add more flexibility to the error injection (EINJ) debugfs interface

* 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, mce: Fix mce_start_timer semantics
  ACPI, APEI, GHES: Cleanup ghes memory error handling
  ACPI, APEI: Cleanup alignment-aware accesses
  ACPI, APEI, GHES: Do not report only correctable errors with SCI
  ACPI, APEI, EINJ: Changes to the ACPI/APEI/EINJ debugfs interface
  ACPI, eMCA: Combine eMCA/EDAC event reporting priority
  EDAC, sb_edac: Modify H/W event reporting policy
  EDAC: Add an edac_report parameter to EDAC
  PCI, AER: Fix severity usage in aer trace event
  x86, mce: Call put_device on device_register failure
2014-01-20 12:10:27 -08:00
Linus Torvalds 09854dde94 * mpc85xx PCIe error interrupt support
* misc small enhancements/fixes all over the place.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQIcBAABAgAGBQJS3PEWAAoJEBLB8Bhh3lVKziAP/3nNouipUvIcRpL3o8U3jX19
 Z38tD0KPjIIX46rgexjoXbI/bKEy6whE1eDc0CG9GPpOaN9p9WWe81hfBIQc9DYK
 epFNdH3Wk83Ml+3+01CBKfLfiIV25c7rc9IOM7g+nMOg65Z++iC1Cea7i7Ul7T5a
 C+CIDdsmco9VrDBNjHHsrdYVZ1Ufx4NxPb5xhemQAiGCXseBtoD1IDS/gOM1F+aP
 UBDSJobjDrFq5JasEkp83U62VBTDndEcxb6yHROVahIPRn4miroc0NMHJ3XEd1/H
 K9u24iXmHgjjG3Euzd3mq8Axsscz8dUksKQT+lL2YIXz+AM8PcrCDrXK6TiVF9/A
 k5Vj91svnWUDrEU0OF1HysOvn0Z/9Y0+Fwyt6//HMyl/7ehCZBINwxsZ4sc4whtd
 nVHV2Ddcc/LjZzQEAvHuyWdf2pfxi3M1VRhNvuGyWtdHBPf5P8tqVUteoztELPM+
 bKr7wkpvKzKajX6xldNNrVP9xNps8hrYdETjhP5FpUYpF4HKntAe+VJvIue+nOja
 K2AxB25qGHyK5rgh69DkSuatZmImflG4brKWbOE+4La0E8OajrM790YdqP2hRnDQ
 3zpuIRr/htIAy7C2vGbmWITRhxXnGx5FhDI7AQRr1VjvgJprWM5zgIacDuH+5C9K
 ftouZ1hFTDI1WEEMDxRF
 =EJ+3
 -----END PGP SIGNATURE-----

Merge tag 'edac_for_3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp

Pull EDAC updates from Borislav Petkov:
 - mpc85xx PCIe error interrupt support
 - misc small enhancements/fixes all over the place.

* tag 'edac_for_3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC: Don't try to cancel workqueue when it's never setup
  e752x_edac: Fix pci_dev usage count
  sb_edac: Mark get_mci_for_node_id as static
  EDAC: Mark edac_create_debug_nodes as static
  amd64_edac: Remove "amd64" prefix from static functions
  amd64_edac: Simplify code around decode_bus_error
  amd64_edac: Mark amd64_decode_bus_error as static
  EDAC: Remove DEFINE_PCI_DEVICE_TABLE macro
  amd64_edac: Fix condition to verify max channels allowed for F15 M30h
  edac/85xx: Add PCIe error interrupt edac support
2014-01-20 09:26:15 -08:00
Stephen Boyd 881f0fcef9 EDAC: Don't try to cancel workqueue when it's never setup
We only setup a workqueue for edac devices that use the polling
method. We still try to cancel the workqueue if an edac_device
uses the irq method though. This causes a warning from debug
objects when we remove an edac device:

WARNING: CPU: 0 PID: 56 at lib/debugobjects.c:260 debug_print_object+0x98/0xc0()
ODEBUG: assert_init not available (active state 0) object type: timer_list hint: stub_timer+0x0/0x28
Modules linked in: krait_edac(-)
CPU: 0 PID: 56 Comm: rmmod Not tainted 3.12.0-rc2-00035-g15292a0 #69
(unwind_backtrace+0x0/0x144)
(show_stack+0x20/0x24)
(dump_stack+0x74/0xb4)
(warn_slowpath_common+0x78/0x9c)
(warn_slowpath_fmt+0x40/0x48)
(debug_print_object+0x98/0xc0)
(debug_object_assert_init+0xdc/0xec)
(del_timer+0x24/0x7c)
(try_to_grab_pending+0xc0/0x1b0)
(cancel_delayed_work+0x2c/0xa0)
(edac_device_workq_teardown+0x1c/0x38)
(edac_device_del_device+0xb8/0xe4)
(krait_edac_remove+0x50/0x70 [krait_edac])
(platform_drv_remove+0x24/0x28)
(__device_release_driver+0x68/0xc0)
(driver_detach+0xc4/0xc8)
(bus_remove_driver+0xac/0x114)
(driver_unregister+0x38/0x58)
(platform_driver_unregister+0x1c/0x20)
(krait_edac_driver_exit+0x14/0x1c [krait_edac])
(SyS_delete_module+0x178/0x2b4)

Fix it by skipping the workqueue teardown for such devices.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Link: http://lkml.kernel.org/r/1388434457-4194-2-git-send-email-sboyd@codeaurora.org
Signed-off-by: Borislav Petkov <bp@suse.de>
2014-01-10 15:57:36 +01:00
Aristeu Rozanski 90ed4988b8 e752x_edac: Fix pci_dev usage count
In case the device 0, function 1 is not found using pci_get_device(),
pci_scan_single_device() will be used but, differently than
pci_get_device(), it allocates a pci_dev but doesn't does bump the usage
count on the pci_dev and after few module removals and loads the pci_dev
will be freed.

Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Reviewed-by: mark gross <mark.gross@intel.com>
Link: http://lkml.kernel.org/r/20131205153755.GL4545@redhat.com
Signed-off-by: Borislav Petkov <bp@suse.de>
2013-12-21 13:26:57 +01:00
Ingo Molnar 014952270e * Add the functionality to override error reporting agents as some
machines are sporting a new extended error logging capability which, if
 done properly in the BIOS, makes a corresponding EDAC module redundant,
 from Gong Chen.
 
 * PCIe AER tracepoint severity levels fix, from Rui Wang.
 
 * Error path correction for the mce device init, from Levente Kurusa.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQIcBAABAgAGBQJSrCysAAoJEBLB8Bhh3lVK1ikP/0hKY1Kk4tjbSta9A9Z8LdQG
 9F5JzEny47DpTrLaKij7MqAlbYFO8sSm7Zw0CEztTF7Ou/H37GAuxhMlB8ECMGOm
 Dzu53X1rySTna9mB+1gyXXd+pJypp/oe18/o16rw1QKjI9o2Kfgwfj7lKvytR549
 kDM1dhxEImQIS5cpJPkOPbcpVlSqYN7BnK9/Qx3h0W70httT/8qrr9xVtVL7wjOT
 auTA0R5/TkV06FtxyfHUNULEWTSP+2yNP/iJbusR6f4Jk1j0XmyCFr0BYOkPA1UO
 9+wC9+2R+r7rJw8MBfMzNmPrRzDJHdaiHPwYqse05yewRHfRHe5cgZWJYbL8Qv0u
 2WOX+fY12EfDYlihcOYtlupRzhGfGKRsaRpSuG1zX87ctDxAfNZencv4hnaJvfqG
 Xk6ggIX6tHKEivO2gmaPsmhoKveh0zcozUs+wgh/tvV5QB6ioFCjzHfSEsix5+BH
 ryyg1ri7IZnh92g3UuSUpE0OCbAquMfI7XIJo+kFs0u79dZTL/kD3wVu6oYazwdy
 yTrvIq7Bq5cMWnnni5w7dIU09ef2uvDgyHyAS6+RiqaQxhYFsW8/yx2zJrIloWRs
 7txz6t3CVmWFiejIg2gw6KyjaG6pXRBkDkI1XU6T+bKLb31ojx2+i9UKIIUeRZTB
 iisWAOI6ZSdt4eAkgeaI
 =r//I
 -----END PGP SIGNATURE-----

Merge tag 'ras_for_3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp into x86/ras

Pull RAS updates from Borislav Petkov:

  * Add the functionality to override error reporting agents as some
  machines are sporting a new extended error logging capability which, if
  done properly in the BIOS, makes a corresponding EDAC module redundant,
  from Gong Chen.

  * PCIe AER tracepoint severity levels fix, from Rui Wang.

  * Error path correction for the mce device init, from Levente Kurusa.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-12-16 14:33:17 +01:00
Rashika Kheria 8112c0cdf7 sb_edac: Mark get_mci_for_node_id as static
This patch marks the function get_mci_for_node_id() as static because it
is not used outside of sb_edac.c.

Thus, it also eliminates the following warning:
drivers/edac/sb_edac.c:918:22: warning: no previous prototype for ‘get_mci_for_node_id’ [-Wmissing-prototypes]

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Link: http://lkml.kernel.org/r/0441f508186fc4eeabc8e9c3e4dde013d99405d4.1387029387.git.rashika.kheria@gmail.com
Signed-off-by: Borislav Petkov <bp@suse.de>
2013-12-15 18:02:13 +01:00
Rashika Kheria 95285933d0 EDAC: Mark edac_create_debug_nodes as static
This patch marks the function edac_create_debug_nodes() as static
because it is not used outside of edac_mc_sysfs.c.

Thus, it also eliminates the following warning:
drivers/edac/edac_mc_sysfs.c:917:5: warning: no previous prototype for ‘edac_create_debug_nodes’ [-Wmissing-prototypes]

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Link: http://lkml.kernel.org/r/a1c863b08c0d6f67d03280cf908c771bf26a3239.1387029387.git.rashika.kheria@gmail.com
Signed-off-by: Borislav Petkov <bp@suse.de>
2013-12-15 17:59:59 +01:00
Borislav Petkov d1ea71cdc9 amd64_edac: Remove "amd64" prefix from static functions
No need for the namespace tagging there. Cleanup setup_pci_device while
at it.

Signed-off-by: Borislav Petkov <bp@suse.de>
2013-12-15 17:54:27 +01:00
Borislav Petkov df781d0386 amd64_edac: Simplify code around decode_bus_error
Drop wrapper function and prefixes.

Signed-off-by: Borislav Petkov <bp@suse.de>
2013-12-15 17:29:44 +01:00
Rashika Kheria 79db57cef9 amd64_edac: Mark amd64_decode_bus_error as static
This patch marks the function amd64_decode_bus_error() as static because
it is not used outside of amd64_edac.c.

It also eliminates the following warning:
drivers/edac/amd64_edac.c:2038:6: warning: no previous prototype for ‘amd64_decode_bus_error’ [-Wmissing-prototypes]

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Link: http://lkml.kernel.org/r/7cddbd4c69ed493f183383e98853181aaf75b26b.1387029387.git.rashika.kheria@gmail.com
Signed-off-by: Borislav Petkov <bp@suse.de>
2013-12-15 17:16:59 +01:00
Chen, Gong fd52103966 EDAC, sb_edac: Modify H/W event reporting policy
Newer Intel platforms support more than one method to report H/W event.
On this kind of platform, H/W event report can adopt new method and
traditional EDAC method should be disabled. Moreover, if EDAC event
report method is set to *force*, it means event must be reported via
EDAC interface. IOW, it overrides the default event report policy.

Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/1386310630-12529-3-git-send-email-gong.chen@linux.intel.com
[ Boris: massage commit and error messages ]
Signed-off-by: Borislav Petkov <bp@suse.de>
2013-12-11 18:19:25 +01:00
Chen, Gong c700f013ad EDAC: Add an edac_report parameter to EDAC
This new parameter is used to control how to report HW error reporting,
especially for newer Intel platform, like Ivybridge-EX, which contains
an enhanced error decoding functionality in the firmware, i.e. eMCA.

Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/1386310630-12529-2-git-send-email-gong.chen@linux.intel.com
[ Boris: massage commit message. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
2013-12-11 18:06:47 +01:00
Jingoo Han ba935f4097 EDAC: Remove DEFINE_PCI_DEVICE_TABLE macro
Currently, there is no other bus that has something like this macro for
their device ids. Thus, DEFINE_PCI_DEVICE_TABLE macro should be removed.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Link: http://lkml.kernel.org/r/001c01ceefb3$5724d860$056e8920$%han@samsung.com
[ Boris: swap commit message with better one. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
2013-12-06 10:23:41 +01:00
Aravind Gopalakrishnan 7f3f5240ce amd64_edac: Fix condition to verify max channels allowed for F15 M30h
The value returned from 'f15_m30h_determine_channel' will
always be 0x3 max. The condition

	(channel > 4 || channel < 0)

works as hardware never returns a value of 4, but
it leads to static checker analysis errors like
http://marc.info/?l=linux-edac&m=138607615131951&w=2.

Fix that.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Link: http://lkml.kernel.org/r/20131203130857.GA32170@elgon.mountain
[ Boris: massage commit message a bit. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
2013-12-06 10:04:17 +01:00
Aristeu Rozanski bd4b968362 sb_edac: Shut up compiler warning when EDAC_DEBUG is enabled
Fix this:

In file included from drivers/edac/sb_edac.c:27:0:
drivers/edac/sb_edac.c: In function ‘sbridge_mce_output_error’:
drivers/edac/edac_core.h:50:8: warning: ‘limit’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  printk(level "EDAC " prefix ": " fmt, ##arg)
        ^
drivers/edac/sb_edac.c:948:25: note: ‘limit’ was declared here
  u64   ch_addr, offset, limit, prv = 0;

Limit can be initialized to 0. The only way limit wouldn't be
initialized is if there are no DIMMs present (which would be a bug of
course) and it'd fail on the next test.

Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Link: http://lkml.kernel.org/r/20131121122021.GD26009@pd.tnic
Signed-off-by: Borislav Petkov <bp@suse.de>
2013-11-30 12:26:36 +01:00
Chunhe Lan c92132f598 edac/85xx: Add PCIe error interrupt edac support
Add pcie error interrupt edac support for mpc85xx, p3041, p4080, and
p5020. The mpc85xx uses the legacy interrupt report mechanism - the
error interrupts are reported directly to mpic. While the p3041/
p4080/p5020 attaches the most of error interrupts to interrupt zero. And
report error interrupts to mpic via interrupt 0.

This patch can handle both of them.

Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com>
Link: http://lkml.kernel.org/r/1384712714-8826-3-git-send-email-morbidrsa@gmail.com
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Dave Jiang <dave.jiang@gmail.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@men.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
2013-11-25 11:29:15 +01:00
Linus Torvalds cdd278db0e Merge branch 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac
Pull EDAC driver updates from Mauro Carvalho Chehab:
 - sb_edac: add support for Ivy Bridge support
 - cell_edac: add a missing of_node_put() call

* 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac:
  cell_edac: fix missing of_node_put
  sb_edac: add support for Ivy Bridge
  sb_edac: avoid decoding the same error multiple times
  sb_edac: rename mci_bind_devs()
  sb_edac: enable multiple PCI id tables to be used
  sb_edac: rework sad_pkg
  sb_edac: allow different interleave lists
  sb_edac: allow different dram_rule arrays
  sb_edac: isolate TOHM retrieval
  sb_edac: rename pci_br
  sb_edac: isolate TOLM retrieval
  sb_edac: make RANK_CFG_A value part of sbridge_info
2013-11-18 14:51:52 -08:00
Linus Torvalds 794e96e8ec EDAC updates for 3.13
Highlights:
 
 * Support for Calxeda ECX-2000 memory controller, from Robert Richter
 
 * Misc Calxeda Highbank drivers and EDAC core cleanups, from Rob Herring
   and Robert Richter
 
 * New maintainer for Freescale's MPC85xx EDAC driver: Johannes Thumshirn
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJSiRmeAAoJEBLB8Bhh3lVKYswQAKPCYSsIQg3L3K3320uvWV3x
 NEAxAAdYyN2ds7ksLv//54FBLgH9UeiC56glTMmnK9QvfGCcgHGo1WJCa84LwqIf
 M7H6mKSgTEBZXr7HpWgtarMYjpNve4Nh8SwHv7tlWRJNd3ufcBbOfCY6rEreULJd
 sBTRMuEPc1Ki7NxZr2m/xsPyzWXS1N1nSd2aewiszyY3Rwp1vIAPv/Chr7UwF/Fm
 GGeQonc801hVRIQONwxsXzS2qwj/wgx8OPab05psfMuv6CWLxQQJAzGWbe+gv3V4
 mYx64+U4nOkQ/knRAf9s0fLwJX6DWSTtQer7m5YSUey0dYDfgV+DemLFvS5We7XB
 os9PBGL+0bGUrJ0cnLE6O+6S1qniWaKZrhSZndcYiVoQeDZmaMuartFlIaeRvY21
 WJML2oqqUop2ZyaIKInJEyeD74FIf7BsG3V+RJwsCZx5+38Pm0EnBZqGJ9bnJl7x
 OxXlHjwjZRhlVFIdcN5WeaKoKmXpdcnzLcL1XE2wMgs9ZFaleeyTDXuQm+XxkKGd
 ExD/1TbAoBqFF7FwIAQwqPf1f2HPDBKlSg38X6l6NV5uLK/u5rdffKTMQPWi/6p2
 RDO+Ddbypzm72850hcYc9mY+B8Qe3T3F/iKlbELiK1S5+IQzm/hmfTDcyKStwKZn
 cCTvsIo9QHflhshXR1a8
 =pU/h
 -----END PGP SIGNATURE-----

Merge tag 'edac_for_3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp

Pull EDAC updates from Borislav Petkov:
 "Following up on last week's discussion, here's my part of the EDAC
  pile, highlights in the signed tag.

  The last two patches have a date from just now because I've just
  applied them to the tree after Johannes sent them to me earlier.  I
  decided to forward them now because they're trivial.

  There's a third one for MPC85xx which adds PCIe error interrupt
  support but since it is not so trivial and hasn't seen any linux-next
  time, I'm deferring it to 3.14

  EDAC update highlights:
   - Support for Calxeda ECX-2000 memory controller, from Robert Richter
   - Misc Calxeda Highbank drivers and EDAC core cleanups, from Rob
     Herring and Robert Richter
   - New maintainer for Freescale's MPC85xx EDAC driver: Johannes
     Thumshirn"

* tag 'edac_for_3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  edac/85xx: Remove mpc85xx_pci_err_remove
  EDAC: Add edac-mpc85xx driver to MAINTAINERS
  edac, highbank: Moving error injection to sysfs for edac
  edac, highbank: Add MAINTAINERS entry
  edac: Unify reporting of device info for device, mc and pci
  edac, highbank: Improve and unify naming
  edac, highbank: Add Calxeda ECX-2000 support
  ARM: dts: calxeda: move memory-controller node out of ecx-common.dtsi
  edac, highbank: Fix interrupt setup of mem and l2 controller
2013-11-18 14:50:17 -08:00
Johannes Thumshirn 0f1741c74a edac/85xx: Remove mpc85xx_pci_err_remove
Remove mpc85xx_pci_err_remove(...) which is obsolete, this removes the
compiler warning which can be seen when building the driver either
statically or as a module.

Signed-off-by: Johannes Thumshirn <morbidrsa@gmail.com>
Link: https://lkml.kernel.org/r/20131112161901.GA15637@jtlinux
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@men.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
2013-11-17 20:05:50 +01:00
Libo Chen 3e45588825 cell_edac: fix missing of_node_put
Decrease device_node refcount np after task completion.

Signed-off-by: Libo Chen <libo.chen@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-14 17:13:43 -02:00
Aristeu Rozanski 4d715a805b sb_edac: add support for Ivy Bridge
Since Ivy Bridge memory controller is very similar to Sandy Bridge, it's
wiser to modify sb_edac to support both instead of creating another
driver.

[m.chehab@samsung.com: Fix CodingStyle]
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-14 17:13:22 -02:00
Aristeu Rozanski be3036d220 sb_edac: avoid decoding the same error multiple times
Whenever the extended error reporting is active, multiple MCEs will be
generated for the same event, which will lead to multiple repeated
errors to be reported. So check ADDRV and only decode the error if the
MCE address is valid.

Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-14 16:50:03 -02:00
Aristeu Rozanski ea779b5a09 sb_edac: rename mci_bind_devs()
This is in preparation for Ivy Bridge support

Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-14 16:49:47 -02:00
Aristeu Rozanski 5153a0f94c sb_edac: enable multiple PCI id tables to be used
This is needed to allow separated PCI id tables for Sandy Bridge and Ivy
Bridge.

Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-14 16:49:27 -02:00
Aristeu Rozanski cc311991a7 sb_edac: rework sad_pkg
This is in preparation for Ivy Bridge support

Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-14 16:49:04 -02:00
Aristeu Rozanski ef1ce51e7b sb_edac: allow different interleave lists
This is in preparation for Ivy Bridge support

Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-14 16:48:42 -02:00
Aristeu Rozanski 464f1d829a sb_edac: allow different dram_rule arrays
This is in preparation for Ivy Bridge support

Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-14 16:48:16 -02:00
Aristeu Rozanski 8fd6a43ac9 sb_edac: isolate TOHM retrieval
This is preparation of Ivy Bridge support.

Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-14 16:43:17 -02:00
Aristeu Rozanski 5f8a1b8a7b sb_edac: rename pci_br
Ivy Bridge has more than one, so rename pci_br to pci_br0

Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-14 16:43:06 -02:00
Aristeu Rozanski fb79a50926 sb_edac: isolate TOLM retrieval
This is in preparation for the Ivy Bridge support.

Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-14 16:25:27 -02:00
Aristeu Rozanski ef1e8d03b1 sb_edac: make RANK_CFG_A value part of sbridge_info
This is in preparation of Ivy Bridge support.

Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-14 16:20:37 -02:00
Linus Torvalds 10d0c9705e DeviceTree updates for 3.13. This is a bit larger pull request than
usual for this cycle with lots of clean-up.
 
 - Cross arch clean-up and consolidation of early DT scanning code.
 - Clean-up and removal of arch prom.h headers. Makes arch specific
   prom.h optional on all but Sparc.
 - Addition of interrupts-extended property for devices connected to
   multiple interrupt controllers.
 - Refactoring of DT interrupt parsing code in preparation for deferred
   probe of interrupts.
 - ARM cpu and cpu topology bindings documentation.
 - Various DT vendor binding documentation updates.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJSgPQ4AAoJEMhvYp4jgsXif28H/1WkrXq5+lCFQZF8nbYdE2h0
 R8PsfiJJmAl6/wFgQTsRel+ScMk2hiP08uTyqf2RLnB1v87gCF7MKVaLOdONfUDi
 huXbcQGWCmZv0tbBIklxJe3+X3FIJch4gnyUvPudD1m8a0R0LxWXH/NhdTSFyB20
 PNjhN/IzoN40X1PSAhfB5ndWnoxXBoehV/IVHVDU42vkPVbVTyGAw5qJzHW8CLyN
 2oGTOalOO4ffQ7dIkBEQfj0mrgGcODToPdDvUQyyGZjYK2FY2sGrjyquir6SDcNa
 Q4gwatHTu0ygXpyphjtQf5tc3ZCejJ/F0s3olOAS1ahKGfe01fehtwPRROQnCK8=
 =GCbY
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:
 "DeviceTree updates for 3.13.  This is a bit larger pull request than
  usual for this cycle with lots of clean-up.

   - Cross arch clean-up and consolidation of early DT scanning code.
   - Clean-up and removal of arch prom.h headers.  Makes arch specific
     prom.h optional on all but Sparc.
   - Addition of interrupts-extended property for devices connected to
     multiple interrupt controllers.
   - Refactoring of DT interrupt parsing code in preparation for
     deferred probe of interrupts.
   - ARM cpu and cpu topology bindings documentation.
   - Various DT vendor binding documentation updates"

* tag 'devicetree-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (82 commits)
  powerpc: add missing explicit OF includes for ppc
  dt/irq: add empty of_irq_count for !OF_IRQ
  dt: disable self-tests for !OF_IRQ
  of: irq: Fix interrupt-map entry matching
  MIPS: Netlogic: replace early_init_devtree() call
  of: Add Panasonic Corporation vendor prefix
  of: Add Chunghwa Picture Tubes Ltd. vendor prefix
  of: Add AU Optronics Corporation vendor prefix
  of/irq: Fix potential buffer overflow
  of/irq: Fix bug in interrupt parsing refactor.
  of: set dma_mask to point to coherent_dma_mask
  of: add vendor prefix for PHYTEC Messtechnik GmbH
  DT: sort vendor-prefixes.txt
  of: Add vendor prefix for Cadence
  of: Add empty for_each_available_child_of_node() macro definition
  arm/versatile: Fix versatile irq specifications.
  of/irq: create interrupts-extended property
  microblaze/pci: Drop PowerPC-ism from irq parsing
  of/irq: Create of_irq_parse_and_map_pci() to consolidate arch code.
  of/irq: Use irq_of_parse_and_map()
  ...
2013-11-12 16:52:17 +09:00
Robert Richter 78cfbf0bbf edac, highbank: Moving error injection to sysfs for edac
Always have the error injection i/f available, even if there is no
debugfs or EDAC_DEBUG enabled. We need this for testing production
kernels and environments.

Thus, the entry moves from:

 /sys/kernel/debug/edac/mc0/inject_ctrl

to:

 /sys/devices/system/edac/mc/mc0/inject_ctrl

No other changes of the interface.

Signed-off-by: Robert Richter <robert.richter@linaro.org>
Signed-off-by: Robert Richter <rric@kernel.org>
2013-11-04 17:01:11 -06:00
Robert Richter 7270a6085a edac: Unify reporting of device info for device, mc and pci
Log messages slightly differ between edac subsystems. Unifying it.

Signed-off-by: Robert Richter <robert.richter@linaro.org>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Robert Richter <rric@kernel.org>
2013-11-04 17:01:09 -06:00
Robert Richter 41ec0e8da0 edac, highbank: Improve and unify naming
Assinging correct names of the 'hb_mc_edac' and 'hb_l2_edac' edac
modules for module, controller and device. Reported values for
Highbank in dmesg are now:

 EDAC MC0: Giving out device to module hb_mc_edac controller
 calxeda,hb-ddr-ctrl: DEV fff00000.memory-controller (INTERRUPT)

 EDAC DEVICE0: Giving out device to module hb_l2_edac controller
 calxeda,hb-sregs-l2-ecc: DEV fff3c200.sregs (INTERRUPT)

Signed-off-by: Robert Richter <robert.richter@linaro.org>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Robert Richter <rric@kernel.org>
2013-11-04 17:01:07 -06:00
Robert Richter 0ec8579e16 edac, highbank: Add Calxeda ECX-2000 support
Implement edac support for Calxeda ECX-2000.

The ECX-2000 memory controller is similar to Highbank but has
different register bases for error and interrupt registers. There is
an own device tree name "calxeda,ecx-2000-ddr-ctrl" for identification
and initialization of the ECX-2000 and its base addresses.

Signed-off-by: Robert Richter <robert.richter@linaro.org>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Robert Richter <rric@kernel.org>
2013-11-04 17:01:06 -06:00
Robert Richter a72b8859fd edac, highbank: Fix interrupt setup of mem and l2 controller
Register and enable interrupts after the edac registration. Otherwise
incomming ecc error interrupts lead to crashes during device setup.

Fixing this in drivers for mc and l2.

Signed-off-by: Robert Richter <robert.richter@linaro.org>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Cc: stable <stable@vger.kernel.org>     # 3.6+
Signed-off-by: Robert Richter <rric@kernel.org>
2013-11-04 15:43:18 -06:00
Chen, Gong 56507694de EDAC, GHES: Update ghes error record info
In latest UEFI spec(by now it's 2.4) there are some new
fields for memory error reporting. Add these new fields for
ghes_edac interface.

Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-10-23 10:11:00 -07:00
Chen, Gong 147de14772 ACPI, APEI, CPER: Add UEFI 2.4 support for memory error
In latest UEFI spec(by now it is 2.4) memory error definition
for CPER (UEFI 2.4 Appendix N Common Platform Error Record)
adds some new fields. These fields help people to locate
memory error to an actual DIMM location.

Original-author: Tony Luck <tony.luck@intel.com>
Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-10-23 10:10:20 -07:00
Chen, Gong 10ef6b0dff bitops: Introduce a more generic BITMASK macro
GENMASK is used to create a contiguous bitmask([hi:lo]). It is
implemented twice in current kernel. One is in EDAC driver, the other
is in SiS/XGI FB driver. Move it to a more generic place for other
usage.

Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-10-21 15:12:01 -07:00
Rob Herring 5af5073004 drivers: clean-up prom.h implicit includes
Powerpc is a mess of implicit includes by prom.h. Add the necessary
explicit includes to drivers in preparation of prom.h cleanup.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
2013-10-09 20:04:04 -05:00
Linus Torvalds 4de9ad9bc0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
Pull Tile arch updates from Chris Metcalf:
 "These changes bring in a bunch of new functionality that has been
  maintained internally at Tilera over the last year, plus other stray
  bits of work that I've taken into the tile tree from other folks.

  The changes include some PCI root complex work, interrupt-driven
  console support, support for performing fast-path unaligned data
  fixups by kernel-based JIT code generation, CONFIG_PREEMPT support,
  vDSO support for gettimeofday(), a serial driver for the tilegx
  on-chip UART, KGDB support, more optimized string routines, support
  for ftrace and kprobes, improved ASLR, and many bug fixes.

  We also remove support for the old TILE64 chip, which is no longer
  buildable"

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: (85 commits)
  tile: refresh tile defconfig files
  tile: rework <asm/cmpxchg.h>
  tile PCI RC: make default consistent DMA mask 32-bit
  tile: add null check for kzalloc in tile/kernel/setup.c
  tile: make __write_once a synonym for __read_mostly
  tile: remove support for TILE64
  tile: use asm-generic/bitops/builtin-*.h
  tile: eliminate no-op "noatomichash" boot argument
  tile: use standard tile_bundle_bits type in traps.c
  tile: simplify code referencing hypervisor API addresses
  tile: change <asm/system.h> to <asm/switch_to.h> in comments
  tile: mark pcibios_init() as __init
  tile: check for correct compiler earlier in asm-offsets.c
  tile: use standard 'generic-y' model for <asm/hw_irq.h>
  tile: use asm-generic version of <asm/local64.h>
  tile PCI RC: add comment about "PCI hole" problem
  tile: remove DEBUG_EXTRA_FLAGS kernel config option
  tile: add virt_to_kpte() API and clean up and document behavior
  tile: support FRAME_POINTER
  tile: support reporting Tilera hypervisor statistics
  ...
2013-09-06 11:14:33 -07:00
Aravind Gopalakrishnan 4fc06b3171 amd64_edac: Fix incorrect wraparounds
dct_base and dct_limit obtain 32 bit register values when they read
their respective pci config space registers. A left shift beyond 32 bits
will cause them to wrap around. Similar case for chan_addr as can be
seen from the bug report (link below). In the patch, we rectify this by
casting chan_addr to u64 and by comparing dct_base and dct_limit against
properly shifted sys_addr in order to compare the correct bits.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Link: http://lkml.kernel.org/r/20130819132302.GA12171@elgon.mountain
Signed-off-by: Borislav Petkov <bp@suse.de>
2013-08-27 15:00:22 +02:00
Borislav Petkov 3f0aba4fc0 amd64_edac: Correct erratum 505 range
Basically we want to cover all 0x0-0xf models, i.e. Orochi and later.

Cc: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Link: http://lkml.kernel.org/r/20130819192321.GF4165@pd.tnic
Signed-off-by: Borislav Petkov <bp@suse.de>
2013-08-27 14:25:08 +02:00
Ingo Molnar c874b6ba55 An amd64_edac fix for single channel configurations + trivial cleanups
courtesy of Jingoo Han.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJSC6mSAAoJEBLB8Bhh3lVKhKYQALt3lklah1BpZIqyTiLqtizN
 YVF/lSubpcHB2BfnZUzaSInE+17uo21DJ44tQ56O0lWDsxLqadJzTDiJ2BG5Ol3u
 JOIWti/Yl8YoCQQcir6QksBAUkR26iCpelO8kO6J/JWGEekVgl3Oik4NOmYrdN55
 rUoHIyVdK5Z5y4j79Pmth7//+c6OFli1cAeUmBlIvxS9T4T2ZCz30jBim76VTS8H
 AjgaX/aBlE3SxAYoMWLZh1VglukxAVCG2qZ9lm7iNLCpkGwP59jT/DE9Gok2IXBg
 id9SMTkrpitijCyM3oKYox14Tl+QP/brElnWCVyVeRIpkVH8s2WUkU+qHeZztBg9
 8i/aU9x4bOCkDjhvBjIM4jbYJAvvaVKlIXPvANO8xl/A0D7nCsmCs7DpritRHZEr
 3y4N8SQsaamVD083+UaVciAo1XCpl5cNq9gH/Y7+U8h2bIThZn8HTbZ1uWgXaCY1
 OwfElbJDKInsSmDVBEklMI8CF42YsjGQc2JC+A/3M3CapTfepKPg6SvptNQueZb+
 SUw0mgGBumpdDQSHo5tPf5JL1y57ERkdOBVryrqYtr6qdjw3ox9o/+B8eTy3gkg1
 b71LEhzG2UbdSVaHiYhRE/IR3W3yKzNX8Oh3BTHfp04jqnNijx4hHu9oX7j3W59M
 P/bd6GHHI5ZY66aLqCue
 =r2kL
 -----END PGP SIGNATURE-----

Merge tag 'edac_for_3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp into x86/ras

Pull RAS/EDAC updates from Boris Petkov:

 "An amd64_edac fix for single channel configurations + trivial cleanups
  courtesy of Jingoo Han."

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-08-15 10:07:20 +02:00
Jingoo Han 75a9551f2b cpc925_edac: Use proper array termination
The struct should be terminated by using empty braces in order to
fix the following sparse warning.

drivers/edac/cpc925_edac.c:792:10: warning: Using plain integer as NULL pointer

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
[ drop obvious comment ]
Signed-off-by: Borislav Petkov <bp@suse.de>
2013-08-14 12:46:46 +02:00
Borislav Petkov a4b4bedce8 amd64_edac: Get rid of boot_cpu_data accesses
Now that we cache (family, model, stepping) locally, use them instead of
boot_cpu_data.

No functionality change.

Signed-off-by: Borislav Petkov <bp@suse.de>
2013-08-12 16:01:56 +02:00
Aravind Gopalakrishnan 18b94f66f9 amd64_edac: Add ECC decoding support for newer F15h models
On newer models, support has been included for upto 4 DCT's, however,
only DCT0 and DCT3 are currently configured (cf BKDG Section 2.10).
Also, the routing DRAM Requests algorithm is different for F15h M30h.
Thus it is cleaner to use a brand new function rather than adding quirks
to the more generic f1x_match_to_this_node(). Refer to "2.10.5 DRAM
Routing Requests" in the BKDG for further info.

Tested on Fam15h M30h with ECC turned on using mce_amd_inj facility and
verified to be functionally correct.

While at it, verify if erratum workarounds for E505 and E637 still hold.
From email conversations within AMD, the current status of the errata
is:

      * Erratum 505: fixed in model 0x1, stepping 0x1 and later.
      * Erratum 637: not fixed.

Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
[ Cleanups, corrections ]
Signed-off-by: Borislav Petkov <bp@suse.de>
2013-08-12 16:00:10 +02:00
Jingoo Han e0d391ab04 x38_edac: Make a local function static
Make a local function static in order to fix the following sparse
warning:

drivers/edac/x38_edac.c:252:14: warning: symbol 'x38_map_mchbar' was not declared. Should it be static?

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
[ Boris: Correct commit message ]
Signed-off-by: Borislav Petkov <bp@suse.de>
2013-08-09 15:29:10 +02:00
Jingoo Han 166e9334e9 i3200_edac: Make a local function static
This local symbol is used only in this file.
Fix the following sparse warnings:

drivers/edac/i3200_edac.c:264:14: warning: symbol 'i3200_map_mchbar' was not declared. Should it be static?

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
2013-08-09 15:23:02 +02:00
Borislav Petkov f0a56c4801 amd64_edac: Fix single-channel setups
It can happen that configurations are running in a single-channel mode
even with a dual-channel memory controller, by, say, putting the DIMMs
only on the one channel and leaving the other empty. This causes a
problem in init_csrows which implicitly assumes that when the second
channel is enabled, i.e. channel 1, the struct dimm hierarchy will be
present. Which is not.

So always allocate two channels unconditionally.

This provides for the nice side effect that the data structures are
initialized so some day, when memory hotplug is supported, it should
just work out of the box when all of a sudden a second channel appears.

Reported-and-tested-by: Roger Leigh <rleigh@debian.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
2013-07-29 17:22:41 +02:00
Jingoo Han c542b53da9 EDAC: Replace strict_strtol() with kstrtol()
The usage of strict_strtol() is not preferred, because strict_strtol()
is obsolete. Thus, kstrtol() should be used.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
2013-07-24 09:30:03 +02:00
Borislav Petkov 88d84ac973 EDAC: Fix lockdep splat
Fix the following:

BUG: key ffff88043bdd0330 not in .data!
------------[ cut here ]------------
WARNING: at kernel/lockdep.c:2987 lockdep_init_map+0x565/0x5a0()
DEBUG_LOCKS_WARN_ON(1)
Modules linked in: glue_helper sb_edac(+) edac_core snd acpi_cpufreq lrw gf128mul ablk_helper iTCO_wdt evdev i2c_i801 dcdbas button cryptd pcspkr iTCO_vendor_support usb_common lpc_ich mfd_core soundcore mperf processor microcode
CPU: 2 PID: 599 Comm: modprobe Not tainted 3.10.0 #1
Hardware name: Dell Inc. Precision T3600/0PTTT9, BIOS A08 01/24/2013
 0000000000000009 ffff880439a1d920 ffffffff8160a9a9 ffff880439a1d958
 ffffffff8103d9e0 ffff88043af4a510 ffffffff81a16e11 0000000000000000
 ffff88043bdd0330 0000000000000000 ffff880439a1d9b8 ffffffff8103dacc
Call Trace:
  dump_stack
  warn_slowpath_common
  warn_slowpath_fmt
  lockdep_init_map
  ? trace_hardirqs_on_caller
  ? trace_hardirqs_on
  debug_mutex_init
  __mutex_init
  bus_register
  edac_create_sysfs_mci_device
  edac_mc_add_mc
  sbridge_probe
  pci_device_probe
  driver_probe_device
  __driver_attach
  ? driver_probe_device
  bus_for_each_dev
  driver_attach
  bus_add_driver
  driver_register
  __pci_register_driver
  ? 0xffffffffa0010fff
  sbridge_init
  ? 0xffffffffa0010fff
  do_one_initcall
  load_module
  ? unset_module_init_ro_nx
  SyS_init_module
  tracesys
---[ end trace d24a70b0d3ddf733 ]---
EDAC MC0: Giving out device to 'sbridge_edac.c' 'Sandy Bridge Socket#0': DEV 0000:3f:0e.0
EDAC sbridge: Driver loaded.

What happens is that bus_register needs a statically allocated lock_key
because the last is handed in to lockdep. However, struct mem_ctl_info
embeds struct bus_type (the whole struct, not a pointer to it) and the
whole thing gets dynamically allocated.

Fix this by using a statically allocated struct bus_type for the MC bus.

Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: stable@kernel.org # v3.10
Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-07-23 16:01:28 -07:00
Sachin Kamat 8e42e211e4 edac: Remove redundant platform_set_drvdata()
Commit 0998d06310 (device-core: Ensure drvdata = NULL when no
driver is bound) removes the need to set driver data field to
NULL.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-07-17 12:49:55 -04:00
Linus Torvalds d144746478 Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
 "MIPS updates:

   - All the things that didn't make 3.10.
   - Removes the Windriver PPMC platform.  Nobody will miss it.
   - Remove a workaround from kernel/irq/irqdomain.c which was there
     exclusivly for MIPS.  Patch by Grant Likely.
   - More small improvments for the SEAD 3 platform
   - Improvments on the BMIPS / SMP support for the BCM63xx series.
   - Various cleanups of dead leftovers.
   - Platform support for the Cavium Octeon-based EdgeRouter Lite.

  Two large KVM patchsets didn't make it for this pull request because
  their respective authors are vacationing"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (124 commits)
  MIPS: Kconfig: Add missing MODULES dependency to VPE_LOADER
  MIPS: BCM63xx: CLK: Add dummy clk_{set,round}_rate() functions
  MIPS: SEAD3: Disable L2 cache on SEAD-3.
  MIPS: BCM63xx: Enable second core SMP on BCM6328 if available
  MIPS: BCM63xx: Add SMP support to prom.c
  MIPS: define write{b,w,l,q}_relaxed
  MIPS: Expose missing pci_io{map,unmap} declarations
  MIPS: Malta: Update GCMP detection.
  Revert "MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET"
  MIPS: APSP: Remove <asm/kspd.h>
  SSB: Kconfig: Amend SSB_EMBEDDED dependencies
  MIPS: microMIPS: Fix improper definition of ISA exception bit.
  MIPS: Don't try to decode microMIPS branch instructions where they cannot exist.
  MIPS: Declare emulate_load_store_microMIPS as a static function.
  MIPS: Fix typos and cleanup comment
  MIPS: Cleanup indentation and whitespace
  MIPS: BMIPS: support booting from physical CPU other than 0
  MIPS: Only set cpu_has_mmips if SYS_SUPPORTS_MICROMIPS
  MIPS: GIC: Fix gic_set_affinity infinite loop
  MIPS: Don't save/restore OCTEON wide multiplier state on syscalls.
  ...
2013-07-13 14:52:21 -07:00
Linus Torvalds f3acb96f38 Add MCE signatures for family 0x15, models 30-3f.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJR0UeRAAoJEBLB8Bhh3lVKp/oP/1Bn5wFlVNVQymyqjUv8PCui
 W7gro9vf67KSZrEvbvWYuBl3/Z7JI9e7MQMzWOtj1mx/li6G/mSHPWYsoK/g4MRD
 nuxr5EWmXoXvoJvaIPDf/ne9qeMZ88sTv1zQavCWEO+fCY95rUY5DzhJuw8kgjMX
 g++C1AZJFzRGHBF0/VswcBKU1cBaEIJ2h0UI6zJQDPWtTUL5VJcfZ+7CduHf07IA
 rMKqRLKLzBuuQ/aiE52bPQAHirbYbJ9d2jfNqpDRsdBFrOoOeqJbco7ac/itk9Lo
 4Qlh52HuF0rpi9Ub+QIchaQm4SZCFnBuw5liDgT9kp8cOO9KWS6JBNmYa2cEw54F
 LALbdp0XeHCYWoQskzVlTaZlAGADmr4f0C0o1e+XXJYfp8TFIR3ZoconyBKHulsh
 JbQDp1NNC1JzoyZyZW73Gzi4a1yLmf5tB7Y3+O6NMTDy+6RFck3oCwctcr3dRaP2
 pArQA0OCApDixcGfB0h1uX+H8zhVrUen+JcF3KfuXhTepS5koIRbMBglBiJYtSjN
 4RRaV1DWR3ii+gvSfWEaApzX2XxnLYA/6ZJSvicwoRHi6AcZPn5mcLDCXIyYU0p/
 jDGLPY1RU+EmIQlgXUr6CbtlpoCaQOZuyUgSAqQL0pPfCvaeUvX1M7Ly0GqXy5b5
 dKMw7cf7T37S2S9YUBJ/
 =KQCd
 -----END PGP SIGNATURE-----

Merge tag 'edac_for_3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp

Pull AMD EDAC update from Borislav Petkov:
 "Add MCE signatures for family 0x15, models 30-3f"

* tag 'edac_for_3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC, MCE, AMD: Add an MCE signature for new Fam15h models
  EDAC: Replace strict_strtoul() with kstrtoul()
2013-07-03 13:11:18 -07:00
David Daney 9ddebc46e7 MIPS: OCTEON: Rename Kconfig CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOC
CAVIUM_OCTEON_SOC most place we used to use CPU_CAVIUM_OCTEON.  This
allows us to CPU_CAVIUM_OCTEON in places where we have no OCTEON SOC.

Remove CAVIUM_OCTEON_SIMULATOR as it doesn't really do anything, we can
get the same configuration with CAVIUM_OCTEON_SOC.

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-ide@vger.kernel.org
Cc: linux-edac@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: spi-devel-general@lists.sourceforge.net
Cc: devel@driverdev.osuosl.org
Cc: linux-usb@vger.kernel.org
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Patchwork: https://patchwork.linux-mips.org/patch/5295/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-10 18:01:25 +02:00
Aravind Gopalakrishnan aad19e5176 EDAC, MCE, AMD: Add an MCE signature for new Fam15h models
Add a new error signature for Family 15h, models 30h-3fh. Patch has been
tested on Fam15h using mce_amd_inj facility and has been verified to
work correctly.

Signed-off-by: Aravind Gopalakrishnan <aravind.gopalakrishnan@amd.com>
 [ cleanup commit message and error string ]
Signed-off-by: Borislav Petkov <bp@suse.de>
2013-06-08 10:17:03 +02:00
Jingoo Han c7f62fc87b EDAC: Replace strict_strtoul() with kstrtoul()
The usage of strict_strtoul() is not preferred, because strict_strtoul()
is obsolete. Thus, kstrtoul() should be used.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
2013-06-08 10:16:33 +02:00
Stephen Rothwell 40b313608a Finally eradicate CONFIG_HOTPLUG
Ever since commit 45f035ab9b ("CONFIG_HOTPLUG should be always on"),
it has been basically impossible to build a kernel with CONFIG_HOTPLUG
turned off.  Remove all the remaining references to it.

Cc: Russell King <linux@arm.linux.org.uk>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03 14:20:18 -07:00
Borislav Petkov bbb013b920 amd64_edac: Fix bogus sysfs file permissions
Fix yet another issue caught by 8f46baaa7e ("base: core: WARN() about
bogus permissions on device attributes").

Signed-off-by: Borislav Petkov <bp@suse.de>
2013-05-21 09:13:11 +02:00
Linus Torvalds 7462543abb Two small EDAC fixes.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRi31iAAoJEBLB8Bhh3lVKiaQQAIZ4R6/9QSt7KbP5VLN1ksv2
 qV2VOGPuxkhGoO/vfUJ0RKFj0NgnQFYizKl+vjZL/ahQy9yqelWInoc/TO7tHGol
 rxlyCoxmS5kuXwbs8CYhC5OQBvuFSTfk/8Ecu4lZa/PfPKs4IXaq+jzjqfk6/QvC
 jjfJ/4TIbyHLR48tbjoiJtjMQlsZOZ+R9o6Ic0Qw49GlqbIdZ15KzZVnuLRxJWby
 4S2hQnBWkMfc/RYXfliUs6TsXd55qyd88La6PHeY/BJRxQoaBvsPWLEd6Pk6RNWd
 RfpoEHCdUfnFBQMvO5C50/Dp6iKXJ4xqh9qrPg0LVlTtGbPL8gdDfK5QEElhEiuw
 vM9dzfNXFvE4Pavx32WSm7ql2LD9Qf8ZdLPxMlvjNGW14+oQexHmDI6sdU5iVYxb
 toct5jF7MwEy6GQQcwmp84V8y5FU+MyEtT+w9OKLpay/9Bqcq0I/Mv6LJWH10IDC
 bpfkaUm10C1aF2/vP6BB48NGUUElZIxXg9VapzX+AuRs6kN7LLOmM38G371HPEbV
 wcsRCU1znxo1Yjehen6oI9I2AQ4NuMcHplK2FiD0I1AzlRQ/BM6TeHejy84SJMgf
 QEQkjwh8DAClzcKJFlt9uoIglCLLjY/WDVSLgvvhv+/kQIXrLV7zCAhGR2CE27ci
 XQsmruJYlPt0A0xkOh//
 =uyan
 -----END PGP SIGNATURE-----

Merge tag 'edac_fixes_for_3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp

Pull two small EDAC fixes from Borislav Petkov.

* tag 'edac_fixes_for_3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC: Don't give write permission to read-only files
  EDAC, mc_sysfs.c: Fix string array pointer types
2013-05-09 10:11:08 -07:00
Srivatsa S. Bhat c8c64d165c EDAC: Don't give write permission to read-only files
I get the following warning on boot:

------------[ cut here ]------------
WARNING: at drivers/base/core.c:575 device_create_file+0x9a/0xa0()
Hardware name:  -[8737R2A]-
Write permission without 'store'
...
</snip>

Drilling down, this is related to dynamic channel ce_count attribute
files sporting a S_IWUSR mode without a ->store() function. Looking
around, it appears that they aren't supposed to have a ->store()
function. So remove the bogus write permission to get rid of the
warning.

Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: <stable@vger.kernel.org> # 3.[89]
[ shorten commit message ]
Signed-off-by: Borislav Petkov <bp@suse.de>
2013-05-09 12:40:45 +02:00
Linus Torvalds e2823299cd Merge branch 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac
Pull edac fixes from Mauro Carvalho Chehab:
 "Two edac fixes:

   - i7300_edac currently reports a wrong number of DIMMs when the
     memory controller is in single channel mode

   - on some Sandy Bridge machines, the EDAC driver bails out as one of
     the PCI IDs used by the driver is hidden by BIOS.  As the driver
     uses it only to detect the type of memory, make it optional at the
     driver"

* 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac:
  edac: sb_edac.c should not require prescence of IMC_DDRIO device
  i7300_edac: Fix memory detection in single mode
2013-04-30 10:00:49 -07:00
Luck, Tony de4772c621 edac: sb_edac.c should not require prescence of IMC_DDRIO device
The Sandy Bridge EDAC driver uses a register in the IMC_DDRIO CSR
space to determine the type of DIMMs (registered or unregistered).
But this device does not exist on some single socket Sandy Bridge
servers.  While the type of DIMMs is nice to know, it is not essential
for this driver's other functions. So it seems harsh to have it
refuse to load at all when it cannot find this device.

Make the check for this device be optional. If it isn't present
just report the memory type as "MEM_UNKNOWN".

Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-29 10:32:40 -03:00
Mauro Carvalho Chehab 33ad41263d i7300_edac: Fix memory detection in single mode
When the machine is on single mode, only branch 0 channel 0
is valid. However, the code is not honouring it:

[ 1952.639341] EDAC DEBUG: i7300_get_mc_regs: Memory controller operating on single mode
...
[ 1952.639351] EDAC DEBUG: i7300_init_csrows: 		AMB-present CH0 = 0x1:
[ 1952.639353] EDAC DEBUG: i7300_init_csrows: 		AMB-present CH1 = 0x0:
[ 1952.639355] EDAC DEBUG: i7300_init_csrows: 		AMB-present CH2 = 0x0:
[ 1952.639358] EDAC DEBUG: i7300_init_csrows: 		AMB-present CH3 = 0x0:
...
[ 1952.639360] EDAC DEBUG: decode_mtr: 	MTR0 CH0: DIMMs are Present (mtr)
[ 1952.639362] EDAC DEBUG: decode_mtr: 		WIDTH: x8
[ 1952.639363] EDAC DEBUG: decode_mtr: 		ELECTRICAL THROTTLING is enabled
[ 1952.639364] EDAC DEBUG: decode_mtr: 		NUMBANK: 4 bank(s)
[ 1952.639366] EDAC DEBUG: decode_mtr: 		NUMRANK: single
[ 1952.639367] EDAC DEBUG: decode_mtr: 		NUMROW: 16,384 - 14 rows
[ 1952.639368] EDAC DEBUG: decode_mtr: 		NUMCOL: 1,024 - 10 columns
[ 1952.639370] EDAC DEBUG: decode_mtr: 		SIZE: 512 MB
[ 1952.639371] EDAC DEBUG: decode_mtr: 		ECC code is 8-byte-over-32-byte SECDED+ code
[ 1952.639373] EDAC DEBUG: decode_mtr: 		Scrub algorithm for x8 is on enhanced mode
[ 1952.639374] EDAC DEBUG: decode_mtr: 	MTR0 CH1: DIMMs are Present (mtr)
[ 1952.639376] EDAC DEBUG: decode_mtr: 		WIDTH: x8
[ 1952.639377] EDAC DEBUG: decode_mtr: 		ELECTRICAL THROTTLING is enabled
[ 1952.639379] EDAC DEBUG: decode_mtr: 		NUMBANK: 4 bank(s)
[ 1952.639380] EDAC DEBUG: decode_mtr: 		NUMRANK: single
[ 1952.639381] EDAC DEBUG: decode_mtr: 		NUMROW: 16,384 - 14 rows
[ 1952.639383] EDAC DEBUG: decode_mtr: 		NUMCOL: 1,024 - 10 columns
[ 1952.639384] EDAC DEBUG: decode_mtr: 		SIZE: 512 MB
[ 1952.639385] EDAC DEBUG: decode_mtr: 		ECC code is 8-byte-over-32-byte SECDED+ code
[ 1952.639387] EDAC DEBUG: decode_mtr: 		Scrub algorithm for x8 is on enhanced mode
...
[ 1952.639449] EDAC DEBUG: print_dimm_size:               channel 0 | channel 1 | channel 2 | channel 3 |
[ 1952.639451] EDAC DEBUG: print_dimm_size: -------------------------------------------------------------
[ 1952.639453] EDAC DEBUG: print_dimm_size: csrow/SLOT 0   512 MB   |  512 MB   |    0 MB   |    0 MB   |
[ 1952.639456] EDAC DEBUG: print_dimm_size: csrow/SLOT 1     0 MB   |    0 MB   |    0 MB   |    0 MB   |
[ 1952.639458] EDAC DEBUG: print_dimm_size: csrow/SLOT 2     0 MB   |    0 MB   |    0 MB   |    0 MB   |
[ 1952.639460] EDAC DEBUG: print_dimm_size: csrow/SLOT 3     0 MB   |    0 MB   |    0 MB   |    0 MB   |
[ 1952.639462] EDAC DEBUG: print_dimm_size: csrow/SLOT 4     0 MB   |    0 MB   |    0 MB   |    0 MB   |
[ 1952.639464] EDAC DEBUG: print_dimm_size: csrow/SLOT 5     0 MB   |    0 MB   |    0 MB   |    0 MB   |
[ 1952.639466] EDAC DEBUG: print_dimm_size: csrow/SLOT 6     0 MB   |    0 MB   |    0 MB   |    0 MB   |
[ 1952.639468] EDAC DEBUG: print_dimm_size: csrow/SLOT 7     0 MB   |    0 MB   |    0 MB   |    0 MB   |
[ 1952.639470] EDAC DEBUG: print_dimm_size: -------------------------------------------------------------

Instead of detecting a single memory at channel 0, it is showing
twice the memory.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-29 10:32:39 -03:00
Aravind Gopalakrishnan 94c1acf2c8 amd64_edac: Add Family 16h support
Add code to handle DRAM ECC errors decoding for Fam16h.

Tested on Fam16h with ECC turned on using the mce_amd_inj facility and
works fine.

Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
[ Boris: cleanups and clarifications ]
Signed-off-by: Borislav Petkov <bp@suse.de>
2013-04-19 12:46:50 +02:00
Borislav Petkov 8b7719e08a EDAC, mc_sysfs.c: Fix string array pointer types
Those should be const ptr to a const string, fix them.

Signed-off-by: Borislav Petkov <bp@suse.de>
2013-03-25 15:44:25 +01:00
Mauro Carvalho Chehab 9713faecff EDAC: Merge mci.mem_is_per_rank with mci.csbased
Both mci.mem_is_per_rank and mci.csbased denote the same thing: the
memory controller is csrows based. Merge both fields into one.

There's no need for the driver to actually fill it, as the core detects
it by checking if one of the layers has the csrows type as part of the
memory hierarchy:

	if (layers[i].type == EDAC_MC_LAYER_CHIP_SELECT)
			per_rank = true;

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
2013-03-16 06:32:30 +01:00
Mauro Carvalho Chehab 1eef128254 amd64_edac: Correct DIMM sizes
We were filling the csrow size with a wrong value. 16a528ee39 ("EDAC:
Fix csrow size reported in sysfs") tried to address the issue. It fixed
the report with the old API but not with the new one. Correct it for the
new API too.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
[ make it a per-csrow accounting regardless of ->channel_count ]
Signed-off-by: Borislav Petkov <bp@suse.de>
2013-03-16 06:32:02 +01:00
Stephen Hemminger fbe2d3616c EDAC: Make sysfs functions static
Fixes lots of sparse warnings here.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
2013-03-05 11:33:57 +01:00
Linus Torvalds ad6c2c2eb3 Merge branch 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac
Pull EDAC fixes and ghes-edac from Mauro Carvalho Chehab:
 "For:

   - Some fixes at edac drivers (i7core_edac, sb_edac, i3200_edac);
   - error injection support for i5100, when EDAC debug is enabled;
   - fix edac when it is loaded builtin (early init for the subsystem);
   - a "Firmware First" EDAC driver, allowing ghes to report errors via
     EDAC (ghes-edac).

  With regards to ghes-edac, this fixes a longstanding BZ at Red Hat
  that happens with Nehalem and Sandy Bridge CPUs: when both GHES and
  i7core_edac or sb_edac are running, the error reports are
  unpredictable, as both BIOS and OS race to access the registers.  With
  ghes-edac, the EDAC core will refuse to register any other concurrent
  memory error driver.

  This patchset moves the ghes struct definitions to a separate header
  file (include/acpi/ghes.h) and adds 3 hooks at apei/ghes.c to
  register/unregister and to report errors via ghes-edac.  Those changes
  were acked by ghes driver maintainer (Huang)."

* 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: (30 commits)
  i5100_edac: convert to use simple_open()
  ghes_edac: fix to use list_for_each_entry_safe() when delete list items
  ghes_edac: Fix RAS tracing
  ghes_edac: Make it compliant with UEFI spec 2.3.1
  ghes_edac: Improve driver's printk messages
  ghes_edac: Don't credit the same memory dimm twice
  ghes_edac: do a better job of filling EDAC DIMM info
  ghes_edac: add support for reporting errors via EDAC
  ghes_edac: Register at EDAC core the BIOS report
  ghes: add the needed hooks for EDAC error report
  ghes: move structures/enum to a header file
  edac: add support for error type "Info"
  edac: add support for raw error reports
  edac: reduce stack pressure by using a pre-allocated buffer
  edac: lock module owner to avoid error report conflicts
  edac: remove proc_name from mci structure
  edac: add a new memory layer type
  edac: initialize the core earlier
  edac: better report error conditions in debug mode
  i5100_edac: Remove two checkpatch warnings
  ...
2013-02-28 20:42:33 -08:00
Wei Yongjun b0769891ba i5100_edac: convert to use simple_open()
This removes an open coded simple_open() function and
replaces file operations references to the function
with simple_open() instead.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-26 10:06:18 -03:00
Wei Yongjun 5dae92a718 ghes_edac: fix to use list_for_each_entry_safe() when delete list items
Since we will remove items off the list using list_del() we need
to use a safe version of the list_for_each_entry() macro aptly named
list_for_each_entry_safe().

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-26 10:05:35 -03:00
Mauro Carvalho Chehab 8ae8f50ad8 ghes_edac: Fix RAS tracing
With the current version of CPER, there's no way to associate an
error with the memory error. So, the error location in EDAC
layers is unused.

As CPER has its own idea about memory architectural layers, just
output whatever is there inside the driver's detail at the RAS
tracepoint.

The EDAC location keeps untouched, in the case that, in some future,
we could actually map the error into the dimm labels.

Now, the error message:

[   72.396625] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0
[   72.396627] {1}[Hardware Error]: APEI generic hardware error status
[   72.396628] {1}[Hardware Error]: severity: 2, corrected
[   72.396630] {1}[Hardware Error]: section: 0, severity: 2, corrected
[   72.396632] {1}[Hardware Error]: flags: 0x01
[   72.396634] {1}[Hardware Error]: primary
[   72.396635] {1}[Hardware Error]: section_type: memory error
[   72.396637] {1}[Hardware Error]: error_status: 0x0000000000000400
[   72.396638] {1}[Hardware Error]: node: 3
[   72.396639] {1}[Hardware Error]: card: 0
[   72.396640] {1}[Hardware Error]: module: 0
[   72.396641] {1}[Hardware Error]: device: 0
[   72.396643] {1}[Hardware Error]: error_type: 18, unknown
[   72.396666] EDAC MC0: 1 CE reserved error (18) on unknown label (node:3 card:0 module:0 page:0x0 offset:0x0 grain:0 syndrome:0x0 - status(0x0000000000000400): Storage error in DRAM memory)

Is properly represented on the trace event:

     kworker/0:2-584   [000] ....    72.396657: mc_event: 1 Corrected error: reserved error (18) on unknown label (mc:0 location👎-1:-1 address:0x00000000 grain:1 syndrome:0x00000000 APEI location: node:3 card:0 module:0 status(0x0000000000000400): Storage error in DRAM memory)

Tested on a 4 sockets E5-4650 Sandy Bridge machine.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-25 19:42:17 -03:00
Mauro Carvalho Chehab 689c9cd812 ghes_edac: Make it compliant with UEFI spec 2.3.1
The UEFI spec defines the memory error types ans the bits that
validate each field on the memory error record, at
Appendix N om items N.2.5 (Memory Error Section) and
N.2.11 (Error Status). Make the error description compliant with
it, only showing the valid fields.

The EDAC error log is now properly reporting the error:

[  281.556854] mce: [Hardware Error]: Machine check events logged
[  281.557042] {2}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0
[  281.557044] {2}[Hardware Error]: APEI generic hardware error status
[  281.557046] {2}[Hardware Error]: severity: 2, corrected
[  281.557048] {2}[Hardware Error]: section: 0, severity: 2, corrected
[  281.557050] {2}[Hardware Error]: flags: 0x01
[  281.557052] {2}[Hardware Error]: primary
[  281.557053] {2}[Hardware Error]: section_type: memory error
[  281.557055] {2}[Hardware Error]: error_status: 0x0000000000000400
[  281.557056] {2}[Hardware Error]: node: 3
[  281.557057] {2}[Hardware Error]: card: 0
[  281.557058] {2}[Hardware Error]: module: 1
[  281.557059] {2}[Hardware Error]: device: 0
[  281.557061] {2}[Hardware Error]: error_type: 18, unknown
[  281.557067] EDAC DEBUG: ghes_edac_report_mem_error: error validation_bits: 0x000040b9
[  281.557084] EDAC MC0: 1 CE reserved error (18) on unknown label (node:3 card:0 module:1 page:0x0 offset:0x0 grain:0 syndrome:0x0 - status(0x0000000000000400): Storage error in DRAM memory)

Tested on a 4 CPUs E5-4650 Sandy Bridge machine.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-25 19:42:16 -03:00
Mauro Carvalho Chehab d2a6856614 ghes_edac: Improve driver's printk messages
Provide a better infrastructure for printk's inside the driver:
	- use edac_dbg() for debug messages;
	- standardize the usage of pr_info();
	- provide warning about the risk of relying on this
	  driver.

While here, changes the size of a fake memory to 1 page. This is
as good or as bad as 1000 pages, but it is easier for userspace to
detect, as I don't expect that any machine implementing GHES would
provide just 1 page available ;)

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Conflicts:
	drivers/edac/ghes_edac.c
2013-02-25 19:42:15 -03:00
Mauro Carvalho Chehab 5ee726db52 ghes_edac: Don't credit the same memory dimm twice
On my tests on a 4xE5-4650 CPU's system, the GHES
EDAC driver is called twice. As the SMBIOS DMI enumeration
call will seek for the entire DIMM sockets in the system, on
this machine, equipped with 128 GB of RAM, the memory is
displayed twice:

          +-----------------------+
          |    mc0    |    mc1    |
----------+-----------------------+
memory45: |  8192 MB  |  8192 MB  |
memory44: |     0 MB  |     0 MB  |
----------+-----------------------+
memory43: |     0 MB  |     0 MB  |
memory42: |  8192 MB  |  8192 MB  |
----------+-----------------------+
memory41: |     0 MB  |     0 MB  |
memory40: |     0 MB  |     0 MB  |
----------+-----------------------+
memory39: |  8192 MB  |  8192 MB  |
memory38: |     0 MB  |     0 MB  |
----------+-----------------------+
memory37: |     0 MB  |     0 MB  |
memory36: |  8192 MB  |  8192 MB  |
----------+-----------------------+
memory35: |     0 MB  |     0 MB  |
memory34: |     0 MB  |     0 MB  |
----------+-----------------------+
memory33: |  8192 MB  |  8192 MB  |
memory32: |     0 MB  |     0 MB  |
----------+-----------------------+
memory31: |     0 MB  |     0 MB  |
memory30: |  8192 MB  |  8192 MB  |
----------+-----------------------+
memory29: |     0 MB  |     0 MB  |
memory28: |     0 MB  |     0 MB  |
----------+-----------------------+
memory27: |  8192 MB  |  8192 MB  |
memory26: |     0 MB  |     0 MB  |
----------+-----------------------+
memory25: |     0 MB  |     0 MB  |
memory24: |  8192 MB  |  8192 MB  |
----------+-----------------------+
memory23: |     0 MB  |     0 MB  |
memory22: |     0 MB  |     0 MB  |
----------+-----------------------+
memory21: |  8192 MB  |  8192 MB  |
memory20: |     0 MB  |     0 MB  |
----------+-----------------------+
memory19: |     0 MB  |     0 MB  |
memory18: |  8192 MB  |  8192 MB  |
----------+-----------------------+
memory17: |     0 MB  |     0 MB  |
memory16: |     0 MB  |     0 MB  |
----------+-----------------------+
memory15: |  8192 MB  |  8192 MB  |
memory14: |     0 MB  |     0 MB  |
----------+-----------------------+
memory13: |     0 MB  |     0 MB  |
memory12: |  8192 MB  |  8192 MB  |
----------+-----------------------+
memory11: |     0 MB  |     0 MB  |
memory10: |     0 MB  |     0 MB  |
----------+-----------------------+
memory9:  |  8192 MB  |  8192 MB  |
memory8:  |     0 MB  |     0 MB  |
----------+-----------------------+
memory7:  |     0 MB  |     0 MB  |
memory6:  |  8192 MB  |  8192 MB  |
----------+-----------------------+
memory5:  |     0 MB  |     0 MB  |
memory4:  |     0 MB  |     0 MB  |
----------+-----------------------+
memory3:  |  8192 MB  |  8192 MB  |
memory2:  |     0 MB  |     0 MB  |
----------+-----------------------+
memory1:  |     0 MB  |     0 MB  |
memory0:  |  8192 MB  |  8192 MB  |
----------+-----------------------+

Total sum of 256 GB.

As there's no reliable way to credit DIMMS to the right memory
controller, just put everything on memory controller 0 (with should
always exist).

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-25 19:42:14 -03:00
Mauro Carvalho Chehab 32fa1f53c2 ghes_edac: do a better job of filling EDAC DIMM info
Instead of just faking a random value for the DIMM data, get
the information that it is available via DMI table.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-25 19:42:13 -03:00
Mauro Carvalho Chehab f04c62a703 ghes_edac: add support for reporting errors via EDAC
Now that the EDAC core is capable of just forward the errors via
the userspace API, add a report mechanism for the GHES errors.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-25 19:42:13 -03:00
Mauro Carvalho Chehab 77c5f5d2f2 ghes_edac: Register at EDAC core the BIOS report
Register GHES at EDAC MC core, in order to avoid other
drivers to also handle errors and mangle with error data.

The edac core will warrant that just one driver will be used,
so the first one to register (BIOS first) will be the one that
will be reporting the hardware errors.

For now, the EDAC driver does nothing but to register at the
EDAC core, preventing the hardware-driven mechanism to
interfere with GHES.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-25 19:42:12 -03:00
Linus Torvalds 06991c28f3 Driver core patches for 3.9-rc1
Here is the big driver core merge for 3.9-rc1
 
 There are two major series here, both of which touch lots of drivers all
 over the kernel, and will cause you some merge conflicts:
   - add a new function called devm_ioremap_resource() to properly be
     able to check return values.
   - remove CONFIG_EXPERIMENTAL
 
 If you need me to provide a merged tree to handle these resolutions,
 please let me know.
 
 Other than those patches, there's not much here, some minor fixes and
 updates.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlEmV0cACgkQMUfUDdst+yncCQCfbmnQZju7kzWXk6PjdFuKspT9
 weAAoMCzcAtEzzc4LXuUxxG/sXBVBCjW
 =yWAQ
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core patches from Greg Kroah-Hartman:
 "Here is the big driver core merge for 3.9-rc1

  There are two major series here, both of which touch lots of drivers
  all over the kernel, and will cause you some merge conflicts:

   - add a new function called devm_ioremap_resource() to properly be
     able to check return values.

   - remove CONFIG_EXPERIMENTAL

  Other than those patches, there's not much here, some minor fixes and
  updates"

Fix up trivial conflicts

* tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits)
  base: memory: fix soft/hard_offline_page permissions
  drivercore: Fix ordering between deferred_probe and exiting initcalls
  backlight: fix class_find_device() arguments
  TTY: mark tty_get_device call with the proper const values
  driver-core: constify data for class_find_device()
  firmware: Ignore abort check when no user-helper is used
  firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER
  firmware: Make user-mode helper optional
  firmware: Refactoring for splitting user-mode helper code
  Driver core: treat unregistered bus_types as having no devices
  watchdog: Convert to devm_ioremap_resource()
  thermal: Convert to devm_ioremap_resource()
  spi: Convert to devm_ioremap_resource()
  power: Convert to devm_ioremap_resource()
  mtd: Convert to devm_ioremap_resource()
  mmc: Convert to devm_ioremap_resource()
  mfd: Convert to devm_ioremap_resource()
  media: Convert to devm_ioremap_resource()
  iommu: Convert to devm_ioremap_resource()
  drm: Convert to devm_ioremap_resource()
  ...
2013-02-21 12:05:51 -08:00
Mauro Carvalho Chehab e7e248304c edac: add support for raw error reports
That allows APEI GHES driver to report errors directly, using
the EDAC error report API.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21 14:16:03 -03:00
Mauro Carvalho Chehab c7ef764554 edac: reduce stack pressure by using a pre-allocated buffer
The number of variables at the stack is too big.
Reduces the stack usage by using a pre-allocated error
buffer.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21 13:48:45 -03:00
Mauro Carvalho Chehab 80cc7d87d5 edac: lock module owner to avoid error report conflicts
APEI GHES and i7core_edac/sb_edac currently can be loaded at
the same time, but those are Highlander modules:
	"There can be only one".

There are two reasons for that:

1) Each driver assumes that it is the only one registering at
   the EDAC core, as it is driver's responsibility to number
   the memory controllers, and all of them start from 0;

2) If BIOS is handling the memory errors, the OS can't also be
   doing it, as one will mangle with the other.

So, we need to add an module owner's lock at the EDAC core,
in order to avoid having two different modules handling memory
errors at the same time. The best way for doing this lock seems
to use the driver's name, as this is unique, and won't require
changes on every driver.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21 11:06:38 -03:00
Mauro Carvalho Chehab c66b5a79a9 edac: add a new memory layer type
There are some cases where the memory controller layout is
completely hidden. This is the case of firmware-driven error
code, like the one provided by GHES. Add a new layer to be
used on such memory error report mechanisms.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21 11:06:37 -03:00
Mauro Carvalho Chehab 4ab19b06ac edac: initialize the core earlier
In order for it to work with it builtin, the EDAC core should
be initialized earlier, otherwise the ghes_edac driver initializes
before edac_mc_sysfs_init() being called:

...
[    4.998373] EDAC MC0: Giving out device to 'ghes_edac.c' 'ghes_edac': DEV ghes
...
[    4.998373] EDAC MC1: Giving out device to 'ghes_edac.c' 'ghes_edac': DEV ghes
[    6.519495] EDAC MC: Ver: 3.0.0
[    6.523749] EDAC DEBUG: edac_mc_sysfs_init: device mc created

The net result is that no EDAC sysfs nodes will appear.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21 11:06:36 -03:00
Mauro Carvalho Chehab 3d958823e2 edac: better report error conditions in debug mode
It is hard to find what's wrong without a proper error
report. Improve it, in debug mode.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21 11:06:35 -03:00
Mauro Carvalho Chehab 59b9796d1e i5100_edac: Remove two checkpatch warnings
The last changeset introduced a few checkpatch warnings:

WARNING: debugfs_remove_recursive(NULL) is safe this check is probably not required
261: FILE: drivers/edac/i5100_edac.c:1207:
+       if (priv->debugfs)
+               debugfs_remove_recursive(priv->debugfs);

WARNING: debugfs_remove(NULL) is safe this check is probably not required
290: FILE: drivers/edac/i5100_edac.c:1250:
+       if (i5100_debugfs)
+               debugfs_remove(i5100_debugfs);

Get rid of them.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21 11:06:34 -03:00
Niklas Söderlund 9cbc6d38f2 i5100_edac: connect fault injection to debugfs node
Create a debugfs direcotry i5100_edac/mcX for each memory controller and
add nodes to control how fault injection is preformed.

After configuring an injection using inject_channel, inject_deviceptr1,
inject_deviceptr2, inject_eccmask1, inject_eccmask2 and inject_hlinesel
trigger the injection by writing anything to inject_enable.

Example of a CE injection:

echo 0 > /sys/kernel/debug/i5100_edac/mc0/inject_channel
echo 1 > /sys/kernel/debug/i5100_edac/mc0/inject_hlinesel
echo 61440 > /sys/kernel/debug/i5100_edac/mc0/inject_eccmask1
echo 1 > /sys/kernel/debug/i5100_edac/mc0/inject_enable

Example of UE injection:

echo 0 > /sys/kernel/debug/i5100_edac/mc0/inject_channel
echo 2 > /sys/kernel/debug/i5100_edac/mc0/inject_hlinesel
echo 65535 > /sys/kernel/debug/i5100_edac/mc0/inject_eccmask1
echo 65535 > /sys/kernel/debug/i5100_edac/mc0/inject_eccmask2
echo 17 > /sys/kernel/debug/i5100_edac/mc0/inject_deviceptr1
echo 0 > /sys/kernel/debug/i5100_edac/mc0/inject_deviceptr2
echo 1 > /sys/kernel/debug/i5100_edac/mc0/inject_enable

Sometimes it is needed to enable the injection more then once (echo to
the inject_enable node) for the injection to happen, I am not sure why.

Signed-off-by: Niklas Söderlund <niklas.soderlund@ericsson.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21 11:06:34 -03:00
Niklas Söderlund 53ceafd6a2 i5100_edac: add fault injection code
Add fault injection based on information datasheet for i5100, see 1. In
addition to the i5100 datasheet some missing information on injection
functions where found through experimentation and the i7300 datasheet,
see 2.

[1] Intel 5100 Memory Controller Hub Chipset
    Doc.Nr: 318378
    http://www.intel.com/content/dam/doc/datasheet/5100-
    memory-controller-hub-chipset-datasheet.pdf

[2] Intel 7300 Chipset MemoryController Hub (MCH)
    Doc.Nr: 318082
	http://www.intel.com/assets/pdf/datasheet/318082.pdf

Signed-off-by: Niklas Söderlund <niklas.soderlund@ericsson.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21 11:06:33 -03:00
Niklas Söderlund 52608ba205 i5100_edac: probe for device 19 function 0
Probe and store the device handle for the device 19 function 0 during
driver initialization. The device is used during fault injection.

Signed-off-by: Niklas Söderlund <niklas.soderlund@ericsson.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21 11:06:32 -03:00
Mauro Carvalho Chehab e7100478fa edac: only create sdram_scrub_rate where supported
Currently, sdram_scrub_rate sysfs node is created even if the device
doesn't support get/set the scub rate. Change the logic to only
create this device node when the operation is supported.

Reported-by: Felipe Balbi <balbi@ti.com>
Acked-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21 11:06:31 -03:00
Mauro Carvalho Chehab 61734e1835 i3200_edac: Fix the logic that detects filled memories
After running a series of tests on an HP DL320, filled with different
memory sizes, it was noticed that, when filled with just one DIMM
on such hardware, the driver wrongly detects twice the memory, and
thinks that both channels 0 and 1 are filled.

It seems to be partially caused by the BIOS and partially by the driver.

The i3200_edac current logic would be working fine if the BIOS were
disabling the unused second channel when just one DIMM is connected,
in order to do power-saving, as recommended on this chipset's datasheet.

However, the BIOS on this particular machine doesn't do it:

[   16.741421] EDAC DEBUG: how_many_channels: In dual channel mode
[   16.741424] EDAC DEBUG: how_many_channels: 2 DIMMS per channel enabled

So, the driver were assuming that 2 channels are enabled (well, they are,
but the second is unused).

Combined with that, I found two issues at the logic that creates the
EDAC data, that were failing when the two channels are not equally
filled (AFAICT, that happens only when just 1 DIMM is plugged).

The first one is that a 0 at DRB means that nothing is filled. The
driver's logic, however, do some calculation with that.

The second one is that the logic that fills the DIMM data currently
assumes that both channels are equally filled.

I tested the system already with the current configuration and my
patch and it is now working fine. So, for a 2R single DIMM 2Gb memory
at dimm slot 01 (channel 0), it is now displaying:

[   16.741406] EDAC DEBUG: i3200_get_drbs: drb[0][0] = 16, drb[1][0] = 0
[   16.741410] EDAC DEBUG: i3200_get_drbs: drb[0][1] = 32, drb[1][1] = 0
[   16.741413] EDAC DEBUG: i3200_get_drbs: drb[0][2] = 32, drb[1][2] = 0
[   16.741416] EDAC DEBUG: i3200_get_drbs: drb[0][3] = 32, drb[1][3] = 0
...
[   16.741896] EDAC DEBUG: i3200_probe1: csrow 0, channel 0, size = 1024 Mb
[   16.741899] EDAC DEBUG: i3200_probe1: csrow 1, channel 0, size = 1024 Mb

and the corresponding sysfs nodes are now properly filled.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21 11:06:31 -03:00
Mauro Carvalho Chehab 5f466cb025 i3200_edac: Add more debug to the driver
Currently, it is not possible to know, when debug is enabled,
if the driver is using 2 DIMMS per channel mode or not. It is
not possible to know the values of the drbs registers, used
to identify the memory rank sizes.

Add debug for both, as it helps to track issues on the driver.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21 11:06:22 -03:00
Linus Torvalds 55529fa576 EDAC updates for 3.9
Only one: AMD F16h MCE decoding enablement from Jacob Shin.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRI2t7AAoJEBLB8Bhh3lVKmLAP/RbYNVVvLZZxXqB6heCkX7D3
 Avhi4GtuHqjY+79nqBoJEH9HjgzBzL6ffsJGPF3gtXrWybi6nzZkqog5QGRQFfGS
 gIoldbfP9MMF/RrMHbUF5x9Ha9EcdudDgYE3eqCq6KUfOMlUrBRECaU5YRrB+FKR
 qsuQNmF6J3uMPYwO9oGhTpA/vPwwapFaKgm+KND8q5h5JcpJrRpooKNQc1DheW+x
 nfYFpmSBW8eamVwV5DTjqKVhKeG3gB/3i6uSTpLvh4i0ZmV2vQ+drwC3aU0Eh0Q4
 wnslEpQENjODsvbZH6b0j2WTDgBGKEpALRkMUDTnnqvYrR96cV02MWUfp6cbKYCv
 +d/iPt3hEBCyDTDzfP66N+1b+Wqls4Dx8lhhqLdPhsIpY2Qu8OQ8/mjyIIs12qK5
 g9w3lsfy3shWmdsK/Ehd0IhNt1bzNV+63CINA2isC2QAp0Eqecj3jKrXor+MTPu1
 uRY3wM+8CrdeFNNhhhsMQYIb4+DFGLgMwY5mV6z8ceFJAjxvyUxjObnSMopjBKog
 9+JcyEHCADbpHsRup/zRIoGtSs+44sQ6l8l7pq6d4K4UfkG7Biq9lcxThID7rImn
 Rl6MOJVmJuM5n9JVIU4/bmhjfuTcI+gdshexDEH2HnqaXxd7ceIbnrFWFaBZEO5t
 t3WasBuIb30g1XCQmNT6
 =LbcU
 -----END PGP SIGNATURE-----

Merge tag 'edac_3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp

Pull EDAC updates from Borislav Petkov:
 "Mostly AMD's side of EDAC.  It is basically a new family enablement
  stuff: AMD F16h MCE decoding enablement from Jacob Shin.  The rest is
  trivial cleanups."

* tag 'edac_3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  mpc85xx_edac: Fix typo
  EDAC, MCE, AMD: Remove unneeded exports
  EDAC, MCE, AMD: Add MCE decoding support for Family 16h
  EDAC, MCE, AMD: Make MC2 decoding per-family
  amd64_edac: Remove dead code
2013-02-20 11:28:50 -08:00
Mauro Carvalho Chehab 1339730e73 Linux 3.8-rc7
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQEcBAABAgAGBQJRFWw4AAoJEHm+PkMAQRiGnTAH/jBHA2umNc3lc7VkUpusve4q
 GGIlNzYh6iuvIGwKQVj9YPsl37qtQnkDUmY8f8WxZjfxiIDw3TkRKDgNLJaM3Jy5
 E426/FGlRx/Iia5+4tuBeoVYMoIPnndgW5lEAMRK1SvhTByhIYAXsaM0UwPBetb+
 Z5NMdH1f1HVF7RCCmHAkzEk9z78UpdeCzI0t0XuasP2hp2ARAcE1okdO7fNaLiyo
 EmenGhRvy9bAsbRwV0rCdl0rQiZXEYM353DWS7n6q4fyVm8MXFwloUxnWCJTzOIL
 ZLJaz18adFj7Ip/X6ksnMQiQU2Q3B7aThs5ycv0QGxxL2rDFveYRRQ5ICrXOy3M=
 =jjBc
 -----END PGP SIGNATURE-----

Merge tag 'v3.8-rc7' into next

Linux 3.8-rc7

* tag 'v3.8-rc7': (12052 commits)
  Linux 3.8-rc7
  net: sctp: sctp_endpoint_free: zero out secret key data
  net: sctp: sctp_setsockopt_auth_key: use kzfree instead of kfree
  atm/iphase: rename fregt_t -> ffreg_t
  ARM: 7641/1: memory: fix broken mmap by ensuring TASK_UNMAPPED_BASE is aligned
  ARM: DMA mapping: fix bad atomic test
  ARM: realview: ensure that we have sufficient IRQs available
  ARM: GIC: fix GIC cpumask initialization
  net: usb: fix regression from FLAG_NOARP code
  l2tp: dont play with skb->truesize
  net: sctp: sctp_auth_key_put: use kzfree instead of kfree
  netback: correct netbk_tx_err to handle wrap around.
  xen/netback: free already allocated memory on failure in xen_netbk_get_requests
  xen/netback: don't leak pages on failure in xen_netbk_tx_check_gop.
  xen/netback: shutdown the ring if it contains garbage.
  drm/ttm: fix fence locking in ttm_buffer_object_transfer, 2nd try
  virtio_console: Don't access uninitialized data.
  net: qmi_wwan: add more Huawei devices, including E320
  net: cdc_ncm: add another Huawei vendor specific device
  ipv6/ip6_gre: fix error case handling in ip6gre_tunnel_xmit()
  ...
2013-02-20 15:45:52 -03:00
Linus Torvalds f98982ce80 Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform changes from Ingo Molnar:

 - Support for the Technologic Systems TS-5500 platform, by Vivien
   Didelot

 - Improved NUMA support on AMD systems:

   Add support for federated systems where multiple memory controllers
   can exist and see each other over multiple PCI domains.  This
   basically means that AMD node ids can be more than 8 now and the code
   handling this is taught to incorporate PCI domain into those IDs.

 - Support for the Goldfish virtual Android emulator, by Jun Nakajima,
   Intel, Google, et al.

 - Misc fixlets.

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Add TS-5500 platform support
  x86/srat: Simplify memory affinity init error handling
  x86/apb/timer: Remove unnecessary "if"
  goldfish: platform device for x86
  amd64_edac: Fix type usage in NB IDs and memory ranges
  amd64_edac: Fix PCI function lookup
  x86, AMD, NB: Use u16 for northbridge IDs in amd_get_nb_id
  x86, AMD, NB: Add multi-domain support
2013-02-19 20:11:07 -08:00
Baruch Siach e7d2c215e5 mpc85xx_edac: Fix typo
Correct typos.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Cc: Dave Jiang <djiang@mvista.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
2013-02-10 13:28:41 +01:00
Joe Perches d3d09e1820 EDAC: Fix kcalloc argument order
First number, then size.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
2013-01-30 11:38:25 +01:00
Dan Carpenter 8024c4c0b1 EDAC: Test correct variable in ->store function
We're testing for ->show but calling ->store().

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Borislav Petkov <bp@suse.de>
2013-01-30 11:38:11 +01:00
Borislav Petkov 0f08669e86 EDAC, MCE, AMD: Remove unneeded exports
Initially, those strings describing different parts of an MCE message
were shared with amd64_edac and were therefore exported to modules.
However, all except pp_msgs are used only in one place right now so hide
them and make them static.

No functionality change.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Borislav Petkov <bp@alien8.de>
2013-01-22 22:40:03 +01:00
Jacob Shin 980eec8b20 EDAC, MCE, AMD: Add MCE decoding support for Family 16h
Add MCE decoding logic for AMD Family 16h processors.

Boris:

- drop unneeded uu_msgs export
- exit early in cat_mc1_mce and save us an indentation level

Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Signed-off-by: Borislav Petkov <bp@alien8.de>
2013-01-22 22:39:58 +01:00
Jacob Shin 4a73d3de63 EDAC, MCE, AMD: Make MC2 decoding per-family
Currently only AMD Family 15h processors have special handling for MC2
errors. Since upcoming Family 16h will also need unique handling, let's
make MC2 handling part of amd_decoder_ops.

Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Signed-off-by: Borislav Petkov <bp@alien8.de>
2013-01-22 22:39:54 +01:00
Borislav Petkov acc7fcb400 amd64_edac: Remove dead code
5e2af0c09e ("edac: Don't initialize csrow's first_page & friends when
not needed") removed useless initialization of variables but left in the
functions which did that. They're unused now so drop them.

Signed-off-by: Borislav Petkov <bp@alien8.de>
2013-01-22 22:39:41 +01:00
Kees Cook 053417a53e drivers/edac: remove depends on CONFIG_EXPERIMENTAL
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.

Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17 12:11:26 -08:00
Daniel J Blueman c7e5301a1b amd64_edac: Fix type usage in NB IDs and memory ranges
Use appropriate types for northbridge IDs and memory ranges. Mark
immutable data const and keep within compilation unit on related
structures.

Signed-off-by: Daniel J Blueman <daniel@numascale-asia.com>
Link: http://lkml.kernel.org/r/1354265060-22956-2-git-send-email-daniel@numascale-asia.com
[Boris: Drop arg change to node_to_amd_nb]
Signed-off-by: Borislav Petkov <bp@alien8.de>
2013-01-10 16:18:00 +01:00
Daniel J Blueman e2c0bffea2 amd64_edac: Fix PCI function lookup
Fix locating sibling memory controller PCI functions by using the
correct PCI domain and use a northbridge descriptor only if found. We
need to at least warn if it wasn't found so that it gets fixed and we
don't go off with wrong results.

Signed-off-by: Daniel J Blueman <daniel@numascale-asia.com>
Link: http://lkml.kernel.org/r/1354265060-22956-1-git-send-email-daniel@numascale-asia.com
[Boris: remove wrong comment, sanitize code and warn if NB desc lookup fails]
Signed-off-by: Borislav Petkov <bp@alien8.de>
2013-01-10 16:17:59 +01:00
Daniel J Blueman 8b84c8df38 x86, AMD, NB: Use u16 for northbridge IDs in amd_get_nb_id
Change amd_get_nb_id to return u16 to support >255 memory controllers,
and related consistency fixes.

Signed-off-by: Daniel J Blueman <daniel@numascale-asia.com>
Link: http://lkml.kernel.org/r/1353997932-8475-2-git-send-email-daniel@numascale-asia.com
Signed-off-by: Borislav Petkov <bp@alien8.de>
2013-01-10 16:17:58 +01:00
Daniel J Blueman 772c3ff385 x86, AMD, NB: Add multi-domain support
Fix get_node_id to match northbridge IDs from the array of detected
ones, allowing multi-server support such as with Numascale's
NumaConnect, renaming to 'amd_get_node_id' for consistency.

Signed-off-by: Daniel J Blueman <daniel@numascale-asia.com>
Link: http://lkml.kernel.org/r/1353997932-8475-1-git-send-email-daniel@numascale-asia.com
[Boris: shorten lines to fit 80 cols]
Signed-off-by: Borislav Petkov <bp@alien8.de>
2013-01-10 16:17:58 +01:00
Linus Torvalds 57a0c1e2d6 Two error path fixes causing a crash and a Kconfig fix for an issue
which spilled all EDAC suboptions into the 'Device Drivers' menu.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQ7D0jAAoJEBLB8Bhh3lVKtcgP/3uzBjETQ7KzKG9R+zHxkBom
 7pl6UYqgquqpoqP3tGsn0+oaVyEvY3D11NMp/vhGxUjqJjDnIE3T/TvBMIwaRaq1
 /bPrZ+hE5d2mHWP/TULEVVYMziHhR9UO1SpB+E7vX7FqKcLwzeiS7CMlm4qjq0qC
 duXCG/6gyEKIecT3KPuXFzpojV6pSpSIYvLu03hdS3e8w7Wb6jvomWV282TpaSim
 aFyL909M/f4kexWD0827VnBxogwBWPl1hIGfFVprYGrabgUTtfb/OFhnZut8U1FV
 giDtDgIC7nATp1LzTK+fPE5kx9yZvrE1SV8ZTNF6r0dYH14fnR3YgbQqbVgbLUYF
 icQqCHpyZKD+s/ajymq8lg+ltVtROqCLWdT6YFZlaBlObP0sYltpSj1JRcoC5O6c
 Lx252LQQmxMQZKGnNlBooI6QN73GXlsngTgHD9z3DpFgvRilhA8EmbK2ZFFesdkk
 R4s25yH8fno6ClhxlwyA3+0vwU9B19Ul00cx4/5ZXPdK56Fq7slM/ORTE5SQFrHH
 6QG/pYDz09WXhKvOtX4ZRh2bBudMsY7mgsrxFelGYtsqHikLtYVUzkkyFkccjZMj
 UWcHUHsdSx+gr4DK/jclW1tDgwzh2G17d3FJobujGSgJJIqM2qOo/izON/g4+ojA
 RlKqYTCkAh3fX6DZX1vX
 =Qh4Y
 -----END PGP SIGNATURE-----

Merge tag 'edac_fixes_for_3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp

Pull EDAC fixes from Borislav Petkov:
 "Two error path fixes causing a crash and a Kconfig fix for an issue
  which spilled all EDAC suboptions into the 'Device Drivers' menu."

* tag 'edac_fixes_for_3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC: Cleanup device deregistering path
  EDAC: Fix EDAC Kconfig menu
  EDAC: Fix kernel panic on module unloading
2013-01-09 08:43:56 -08:00
Lans Zhang 44d22e2404 EDAC: Cleanup device deregistering path
Use device_unregister to replace put_device + device_del for
cleanup, and fix the potential use after free.

Signed-off-by: Lans Zhang <jia.zhang@windriver.com>
Signed-off-by: Borislav Petkov <bp@alien8.de>
2013-01-07 17:43:00 +01:00
Borislav Petkov 5445166384 EDAC: Fix EDAC Kconfig menu
After f65aad41772f("MIPS: Cavium: Add EDAC support."), when entering
the "Device Drivers" toplevel menu in menuconfig, the suboptions behind
EDAC appeared merged with the rest of the device drivers types. This was
because the menuconfig option EDAC is querying an EDAC_SUPPORT Kconfig
bool which was defined after the menu definition.

When pushing EDAC_SUPPORT up, before the menu definition, the variable
is defined earlier and the above menuconfig artifact doesn't happen.

Drop a useless menuconfig comment while at it.

Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Borislav Petkov <bp@alien8.de>
2013-01-07 17:42:59 +01:00
Konstantin Khlebnikov 311bd84247 EDAC: Fix kernel panic on module unloading
This patch fixes use-after-free and double-free bugs in
edac_mc_sysfs_exit(). mci_pdev has single reference and put_device()
calls mc_attr_release() which calls kfree(). The following
device_del() works with already released memory. An another kfree() in
edac_mc_sysfs_exit() releses the same memory again. Great.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: stable@vger.kernel.org # 3.[67]
Cc: Denis Kirjanov <kirjanov@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Link: http://lkml.kernel.org/r/20121214110310.11019.21098.stgit@zurg
Signed-off-by: Borislav Petkov <bp@alien8.de>
2013-01-07 17:42:58 +01:00
Greg Kroah-Hartman 9b3c6e85c2 Drivers: edac: remove __dev* attributes.
CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, and __devexit
from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Daney <david.daney@cavium.com>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-03 15:57:03 -08:00
Lans Zhang 1c069100c1 i7core_edac: fix kernel crash on unloading i7core_edac.
It is easy to trigger this crash on 3.7.0:

root@intel_westmere_ep-3:~# modprobe -r i7core_edac
EDAC PCI: Removed device 0 for i7core_edac EDAC PCI controller: DEV 0000:fe:03.0
EDAC MC: Removed device 1 for i7core_edac.c i7 core #1: DEV 0000:fe:03.0
EDAC PCI: Removed device 1 for i7core_edac EDAC PCI controller: DEV 0000:ff:03.0
EDAC MC: Removed device 0 for i7core_edac.c i7 core #0: DEV 0000:ff:03.0
BUG: unable to handle kernel NULL pointer dereference at 0000000000000110
IP: [<ffffffff82069ee9>] __blocking_notifier_call_chain+0x29/0x80
PGD 1eaae7067 PUD 1e96e4067 PMD 0
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: minix acpi_cpufreq freq_table mperf ioatdma processor edac_core(-) iTCO_wdt coretemp evdev hwmon lpc_ich dca mfd_core crc32c_intel ioapic [last unloaded: i7core_edac]
CPU 3
Pid: 1268, comm: modprobe Not tainted 3.7.0-WR5.0.1.0_standard+ #30 Intel Corporation S5520HC/S5520HC
RIP: 0010:[<ffffffff82069ee9>]  [<ffffffff82069ee9>] __blocking_notifier_call_chain+0x29/0x80
RSP: 0018:ffff8801eb12de28  EFLAGS: 00010246
RAX: 0000000000000000 RBX: 00000000000000f0 RCX: 00000000ffffffff
RDX: ffff88012b452800 RSI: 0000000000000002 RDI: 00000000000000f0
RBP: ffff8801eb12de68 R08: 0000000000000000 R09: ffffea0004ad1118
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff8801eb12dee8 R14: ffff88012b452800 R15: 000000000060e518
FS:  00007f9ea95a9700(0000) GS:ffff8801efc20000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000110 CR3: 00000001262f1000 CR4: 00000000000007e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process modprobe (pid: 1268, threadinfo ffff8801eb12c000, task ffff8801e8421690)
Stack:
  ffff88012c802a00 ffff88012b445ec0 ffff88012c802300 ffff88012b452800
  0000000000000000 ffff8801eb12dee8 000000000060e080 000000000060e518
  ffff8801eb12de78 ffffffff82069f56 ffff8801eb12dea8 ffffffff824ead7c
Call Trace:
  [<ffffffff82069f56>] blocking_notifier_call_chain+0x16/0x20
  [<ffffffff824ead7c>] device_del+0x3c/0x1d0
  [<ffffffffa00095a8>] edac_mc_sysfs_exit+0x1c/0x2f [edac_core]
  [<ffffffffa000961c>] edac_exit+0x4f/0x56 [edac_core]
  [<ffffffff820a3d2a>] sys_delete_module+0x17a/0x240
  [<ffffffff8212da7c>] ? vm_munmap+0x5c/0x80
  [<ffffffff82877682>] system_call_fastpath+0x16/0x1b
Code: 90 90 55 48 89 e5 48 83 ec 40 48 89 5d d8 4c 89 65 e0 4c 89 6d e8 4c 89 75 f0 4c 89 7d f8 66 66 66 66 90 31 c0 49 89 d6 48 89 fb <48> 8b 57 20 49 89 f5 41 89 cf 4c 8d 67 20 48 85 d2 74 2c 4c 89
RIP  [<ffffffff82069ee9>] __blocking_notifier_call_chain+0x29/0x80
  RSP <ffff8801eb12de28>
CR2: 0000000000000110
---[ end trace b69acf12ccad1c0d ]---

Usually, edac_subsys is grabbed one time by pci at initialization.
But edac_subsys may be released several times if multiple pci MCs exist.
The fix just makes the operations balanced.

Signed-off-by: Lans Zhang <jia.zhang@windriver.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-21 08:01:23 -02:00
Niklas Söderlund c31d34fe92 i7core_edac: fix erroneous size of static array
Remove size from lookup arrays and mark them as const.

Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Niklas Söderlund <niso@kth.se>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-21 08:01:20 -02:00
Mauro Carvalho Chehab da14d93d95 sb_edac: add a missing /n on a debug message
[   17.024963] EDAC DEBUG: get_memory_layout: TOHM: 132.160 GB (0x0000002043ffffff)<7>[   17.024971] EDAC DEBUG: get_memory_layout: SAD#0 DRAM up to 33.792 GB (0x0000000840000000) Interleave: 8:6 reg=0x000083c3

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-21 08:01:18 -02:00
Shaun Ruffell 80f5ab097b edac: edac_mc no longer deals with kobjects directly
There are no more embedded kobjects in struct mem_ctl_info. Remove a header and
a comment that does not reflect the code anymore.

Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-21 08:00:02 -02:00
Linus Torvalds cebfa85eb8 Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
 "The MIPS bits for 3.8.  This also includes a bunch fixes that were
  sitting in the linux-mips.org git tree for a long time.  This pull
  request contains updates to several OCTEON drivers and the board
  support code for BCM47XX, BCM63XX, XLP, XLR, XLS, lantiq, Loongson1B,
  updates to the SSB bus support, MIPS kexec code and adds support for
  kdump.

  When pulling this, there are two expected merge conflicts in
  include/linux/bcma/bcma_driver_chipcommon.h which are trivial to
  resolve, just remove the conflict markers and keep both alternatives."

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (90 commits)
  MIPS: PMC-Sierra Yosemite: Remove support.
  VIDEO: Newport Fix console crashes
  MIPS: wrppmc: Fix build of PCI code.
  MIPS: IP22/IP28: Fix build of EISA code.
  MIPS: RB532: Fix build of prom code.
  MIPS: PowerTV: Fix build.
  MIPS: IP27: Correct fucked grammar in ops-bridge.c
  MIPS: Highmem: Fix build error if CONFIG_DEBUG_HIGHMEM is disabled
  MIPS: Fix potencial corruption
  MIPS: Fix for warning from FPU emulation code
  MIPS: Handle COP3 Unusable exception as COP1X for FP emulation
  MIPS: Fix poweroff failure when HOTPLUG_CPU configured.
  MIPS: MT: Fix build with CONFIG_UIDGID_STRICT_TYPE_CHECKS=y
  MIPS: Remove unused smvp.h
  MIPS/EDAC: Improve OCTEON EDAC support.
  MIPS: OCTEON: Add definitions for OCTEON memory contoller registers.
  MIPS: OCTEON: Add OCTEON family definitions to octeon-model.h
  ata: pata_octeon_cf: Use correct byte order for DMA in when built little-endian.
  MIPS/OCTEON/ata: Convert pata_octeon_cf.c to use device tree.
  MIPS: Remove usage of CEVT_R4K_LIB config option.
  ...
2012-12-14 14:27:45 -08:00
David Daney e1ced09797 MIPS/EDAC: Improve OCTEON EDAC support.
Some initialization errors are reported with the existing OCTEON EDAC
support patch.  Also some parts have more than one memory controller.

Fix the errors and add multiple controllers if present.

Signed-off-by: David Daney <david.daney@cavium.com>
2012-12-13 18:15:26 +01:00
Ralf Baechle f65aad4177 MIPS: Cavium: Add EDAC support.
Drivers for EDAC on Cavium.  Supported subsystems are:

 o CPU primary caches.  These are parity protected only, so only error
   reporting.
 o Second level cache - ECC protected, provides SECDED.
 o Memory: ECC / SECDEC if used with suitable DRAM modules.  The driver will
   will only initialize if ECC is enabled on a system so is safe to run on
   non-ECC memory.
 o PCI: Parity error reporting

Since it is very hard to test this sort of code the implementation is very
conservative and uses polling where possible for now.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>
2012-12-12 16:48:49 +01:00
Linus Torvalds 9ada9fd5df Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull EDAC fixes from Borislav Petkov:

 - EDAC core error path fix, from Denis Kirjanov.

 - Generalization of AMD MCE bank names and some minor error reporting
   improvements.

 - EDAC core cleanups and simplifications, from Wei Yongjun.

 - amd64_edac fixes for sysfs-reported values, from Josh Hunt.

 - some heavy amd64_edac error reporting path shaving, leading to
   removing a bunch of code.

 - amd64_edac error injection method improvements.

 - EDAC core cleanups and fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (24 commits)
  EDAC, pci_sysfs: Use for_each_pci_dev to simplify the code
  EDAC: Handle error path in edac_mc_sysfs_init() properly
  MCE, AMD: Dump error status
  MCE, AMD: Report decoded error type first
  MCE, AMD: Dump CPU f/m/s triple with the error
  MCE, AMD: Remove functional unit references
  EDAC: Convert to use simple_open()
  EDAC, Calxeda highbank: Convert to use simple_open()
  EDAC: Fix mc size reported in sysfs
  EDAC: Fix csrow size reported in sysfs
  EDAC: Pass mci parent
  EDAC: Add memory controller flags
  amd64_edac: Fix csrows size and pages computation
  amd64_edac: Use DBAM_DIMM macro
  amd64_edac: Fix K8 chip select reporting
  amd64_edac: Reorganize error reporting path
  amd64_edac: Do not check whether error address is valid
  amd64_edac: Improve error injection
  amd64_edac: Cleanup error injection code
  amd64_edac: Small fixlets and cleanups
  ...
2012-12-11 11:28:43 -08:00
Wei Yongjun 3bfe5aae8e EDAC, pci_sysfs: Use for_each_pci_dev to simplify the code
Use for_each_pci_dev to simplify the code.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
[Boris: cleanup comments and drop loop brackets]
Signed-off-by: Borislav Petkov <bp@alien8.de>
2012-12-04 08:27:39 +01:00
Linus Torvalds b52c6402b5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac
Pull EDAC fixes from Mauro Carvalho Chehab:
 "One EDAC core fix, and a few driver fixes (i7300, i9275x, i7core)."

* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac:
  i7core_edac: fix panic when accessing sysfs files
  i7300_edac: Fix error flag testing
  edac: Fix the dimm filling for csrows-based layouts
  i82975x_edac: Fix dimm label initialization
2012-12-03 11:16:37 -08:00
Denis Kirjanov 2d56b109e3 EDAC: Handle error path in edac_mc_sysfs_init() properly
Make sure proper deregistration happens on all error paths in
edac_mc_sysfs_init.

Signed-off-by: Denis Kirjanov <kirjanov@gmail.com>
[ Boris: cleanup and concretize commit message ]
Signed-off-by: Borislav Petkov <bp@alien8.de>
2012-11-28 11:56:52 +01:00
Borislav Petkov d5c6770d4c MCE, AMD: Dump error status
Dump error status after decoding the error which describes the error
disposition.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28 11:56:30 +01:00
Borislav Petkov d824c7718b MCE, AMD: Report decoded error type first
Instead of starting with the error details, report the decoded, readable
error type first.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28 11:56:17 +01:00
Borislav Petkov f89f8388cd MCE, AMD: Dump CPU f/m/s triple with the error
It is very useful to have the family/model/stepping with the reported
error so dump it. This saves us asking the bug reporter about it.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28 11:55:57 +01:00
Borislav Petkov f05c41a9c6 MCE, AMD: Remove functional unit references
Having the functional unit names in each bank decode is only misleading
as this code supports multiple families and there's no guarantee the
mapping between FUs and MCE banks will stay the same.

And also, knowing the functional unit name doesn't help much since you
end up looking at the respective BKDG anyway.

So drop all FU references and use the MC bank numbers instead.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28 11:55:44 +01:00
Wei Yongjun db7312a295 EDAC: Convert to use simple_open()
This removes an open coded simple_open() function and replaces file
operations references to the function with simple_open() instead.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28 11:55:22 +01:00
Wei Yongjun f35d852e80 EDAC, Calxeda highbank: Convert to use simple_open()
This removes an open coded simple_open() function and replaces file
operations references to the function with simple_open() instead.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)

Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28 11:55:07 +01:00
Josh Hunt 3c0622760a EDAC: Fix mc size reported in sysfs
This is the complement to previous commit "EDAC: Fix csrow size
reported in sysfs". This fixes the memory controller size reporting on
csrow-based memory controllers. The csrow size is already combined for
both channels. Without this patch memory size is reported doubled.

Signed-off-by: Josh Hunt <johunt@akamai.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28 11:54:50 +01:00
Borislav Petkov 16a528ee39 EDAC: Fix csrow size reported in sysfs
On csrow-based memory controllers, we combine the csrow size from both
channels and there's no need to do that again in csrow_size_show which
leads to double the size of a csrow.

Fix it.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28 11:54:40 +01:00
Borislav Petkov 921a689965 EDAC: Pass mci parent
Initialize the mem_ctl_info descriptor of a csrow properly.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28 11:54:23 +01:00
Borislav Petkov 1165276917 EDAC: Add memory controller flags
The first flag is ->csbased and will be used in common EDAC code later.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28 11:48:04 +01:00
Borislav Petkov 10de6497a5 amd64_edac: Fix csrows size and pages computation
Make sure code pays attention to K8 having only one DCT, reformat and
cleanup code, correct debug messages, remove unused code.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28 11:47:36 +01:00
Borislav Petkov 0a5dfc3140 amd64_edac: Use DBAM_DIMM macro
Instead of open-coding it, use the DBAM_DIMM macro in
amd64_csrow_nr_pages() which we have already.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28 11:46:19 +01:00
Borislav Petkov bb89f5a054 amd64_edac: Fix K8 chip select reporting
This basically reverts 603adaf6b3 ("amd64_edac: fix K8 chip select
reporting") because it was a clumsy workaround for DIMM sizes reporting
on K8 which got superceded by a much more correct one with 41d8bfaba7
("amd64_edac: Improve DRAM address mapping") without removing the prior
one. Remove it now finally.

Reported-by: Josh Hunt <johunt@akamai.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28 11:45:46 +01:00
Borislav Petkov 33ca0643c9 amd64_edac: Reorganize error reporting path
Rewrite CE/UE paths so that they use the same code and drop additional
code duplication in handle_ue. Add a struct err_info which collects
required info for the error reporting. This, in turn, helps slimming all
edac_mc_handle_error() calls down to one.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28 11:45:34 +01:00
Borislav Petkov c8d1adf092 amd64_edac: Do not check whether error address is valid
All families report a valid error address when encountering a DRAM ECC
error so no need to check it.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28 11:45:11 +01:00
Borislav Petkov 66fed2d464 amd64_edac: Improve error injection
When injecting DRAM ECC errors over the F3xB[8,C] interface, the machine
does this by injecting the error in the next non-cached access. This
takes relatively long time on a normal system so that in order for us to
expedite it, we disable the caches around the injection.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28 11:45:01 +01:00
Borislav Petkov 6e71a870b8 amd64_edac: Cleanup error injection code
Invert kstrtoul return value testing and win one indentation level.
Also, shorten up macro names so that the lines can fit into 80 cols. No
functional change.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28 11:44:35 +01:00
Borislav Petkov 1f31677e0d amd64_edac: Small fixlets and cleanups
amd64_get_dram_hole_info: remove local variable 'base'.
sys_addr_to_dram_addr: do not clear local variable 'ret'. Also, sanitize
constants formatting.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28 11:44:12 +01:00
Borislav Petkov f430d5707a EDAC: Handle empty msg strings when reporting errors
A reported error could look like this

[  226.178315] EDAC MC0: 1 CE  on mc#0csrow#0channel#0 (csrow:0 channel:0 page:0x427c0d offset:0xde0 grain:0 syndrome:0x1c6)

with two spaces back-to-back due to the msg argument of
edac_mc_handle_error being passed on empty by the specific drivers.
Handle that.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28 11:24:12 +01:00
Borislav Petkov 4da1b7bfe7 EDAC: Remove useless assignment of error type
The tracepoint decodes the error type later anyway so remove a useless
assignment to the temporary p which gets overwritten later anyway.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28 11:23:50 +01:00
Borislav Petkov 37929874d4 EDAC: Boundary-check edac_debug_level
Only levels [0:4] are allowed so enforce that. Also, while at it,
massage Kconfig text and add valid debug levels range to the module
parameter description.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28 11:23:32 +01:00
Borislav Petkov 876bb331e2 EDAC: Respect operational state in edac_pci.c
Currently, we unconditionally enable PCI polling and we don't look at
the edac_op_state module parameter. Make this dependent on the parameter
setting supplied on the command line.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28 11:22:47 +01:00
Prarit Bhargava 42709efb3a i7core_edac: fix panic when accessing sysfs files
The i7core_edac addrmatch_dev and chancounts_dev have sysfs files
associated with them.  The sysfs files, however, are coded so that the
parent device is is the mci device.  This is incorrect and the mci struct
should be obtained through the addrmatch_dev and chancounts_dev device's
private data field which is populated in i7core_create_sysfs_devices().

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-28 06:56:00 -02:00
Borislav Petkov 43aff26ce1 EDAC: Change Boris' email address
My @amd.com address will be invalid soon so move to private
email address.

Signed-off-by: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/1351532410-4887-2-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-30 10:05:51 +01:00
Jean Delvare 7e06b7a333 i7300_edac: Fix error flag testing
* Right-shift the values in GET_FBD_FAT_IDX and GET_FBD_NF_IDX, so
  that the callers get the result they expect.
* Fix definition of FERR_FAT_FBD_ERR_MASK.
* Call GET_FBD_NF_IDX, not GET_FBD_FAT_IDX, when operating on
  register FERR_NF_FBD. We were lucky they have the same definition.

This fixes kernel bug #44131:
https://bugzilla.kernel.org/show_bug.cgi?id=44131

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-25 07:43:00 -02:00
Mauro Carvalho Chehab 24bef66e74 edac: Fix the dimm filling for csrows-based layouts
The driver is currently filling data in a wrong way, on drivers
for csrows-based memory controller, when the first layer is a
csrow.

This is not easily to notice, as, in general, memories are
filed in dual, interleaved, symetric mode, as very few memory
controllers support asymetric modes.

While digging into a bug for i82795_edac driver, the asymetric
mode there is now working, allowing us to fill the machine with
4x1GB ranks at channel 0, and 2x512GB at channel 1:

Channel 0 ranks:
EDAC DEBUG: i82975x_init_csrows: DIMM A0: from page 0x00000000 to 0x0003ffff (size: 0x00040000 pages)
EDAC DEBUG: i82975x_init_csrows: DIMM A1: from page 0x00040000 to 0x0007ffff (size: 0x00040000 pages)
EDAC DEBUG: i82975x_init_csrows: DIMM A2: from page 0x00080000 to 0x000bffff (size: 0x00040000 pages)
EDAC DEBUG: i82975x_init_csrows: DIMM A3: from page 0x000c0000 to 0x000fffff (size: 0x00040000 pages)

Channel 1 ranks:
EDAC DEBUG: i82975x_init_csrows: DIMM B0: from page 0x00100000 to 0x0011ffff (size: 0x00020000 pages)
EDAC DEBUG: i82975x_init_csrows: DIMM B1: from page 0x00120000 to 0x0013ffff (size: 0x00020000 pages)

Instead of properly showing the memories as such, before this patch, it
shows the memory layout as:

          +-----------------------------------+
          |                mc0                |
          |  csrow0   |  csrow1   |  csrow2   |
----------+-----------------------------------+
channel1: |  1024 MB  |  1024 MB  |   512 MB  |
channel0: |  1024 MB  |  1024 MB  |   512 MB  |
----------+-----------------------------------+

as if both channels were symetric, grouping the DIMMs on a wrong
layout.

After this patch, the memory is correctly represented.
So, for csrows at layers[0], it shows:

          +-----------------------------------------------+
          |                      mc0                      |
          |  csrow0   |  csrow1   |  csrow2   |  csrow3   |
----------+-----------------------------------------------+
channel1: |   512 MB  |   512 MB  |     0 MB  |     0 MB  |
channel0: |  1024 MB  |  1024 MB  |  1024 MB  |  1024 MB  |
----------+-----------------------------------------------+

For csrows at layers[1], it shows:

        +-----------------------+
        |          mc0          |
        | channel0  | channel1  |
--------+-----------------------+
csrow3: |  1024 MB  |     0 MB  |
csrow2: |  1024 MB  |     0 MB  |
--------+-----------------------+
csrow1: |  1024 MB  |   512 MB  |
csrow0: |  1024 MB  |   512 MB  |
--------+-----------------------+

So, no matter of what comes first, the information between
channel and csrow will be properly represented.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-25 07:17:18 -02:00
Mauro Carvalho Chehab 4796968402 i82975x_edac: Fix dimm label initialization
The driver has only 4 hardcoded labels, but allows much more memory.
Fix it by removing the hardcoded logic, using snprintf() instead.

[   19.833972] general protection fault: 0000 [#1] SMP
[   19.837733] Modules linked in: i82975x_edac(+) edac_core firewire_ohci firewire_core crc_itu_t nouveau mxm_wmi wmi video i2c_algo_bit drm_kms_helper ttm drm i2c_core
[   19.837733] CPU 0
[   19.837733] Pid: 390, comm: udevd Not tainted 3.6.1-1.fc17.x86_64.debug #1 Dell Inc.                 Precision WorkStation 390    /0MY510
[   19.837733] RIP: 0010:[<ffffffff813463a8>]  [<ffffffff813463a8>] strncpy+0x18/0x30
[   19.837733] RSP: 0018:ffff880078535b68  EFLAGS: 00010202
[   19.837733] RAX: ffff880069fa9708 RBX: ffff880078588000 RCX: ffff880069fa9708
[   19.837733] RDX: 000000000000001f RSI: 5f706f5f63616465 RDI: ffff880069fa9708
[   19.837733] RBP: ffff880078535b68 R08: ffff880069fa9727 R09: 000000000000fffe
[   19.837733] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000003
[   19.837733] R13: 0000000000000000 R14: ffff880069fa9290 R15: ffff880079624a80
[   19.837733] FS:  00007f3de01ee840(0000) GS:ffff88007c400000(0000) knlGS:0000000000000000
[   19.837733] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   19.837733] CR2: 00007f3de00b9000 CR3: 0000000078dbc000 CR4: 00000000000007f0
[   19.837733] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   19.837733] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[   19.837733] Process udevd (pid: 390, threadinfo ffff880078534000, task ffff880079642450)
[   19.837733] Stack:
[   19.837733]  ffff880078535c18 ffffffffa017c6b8 00040000816d627f ffff880079624a88
[   19.837733]  ffffc90004cd6000 ffff880079624520 ffff88007ac21148 0000000000000000
[   19.837733]  0000000000000000 0004000000000000 feda000078535bc8 ffffffff810d696d
[   19.837733] Call Trace:
[   19.837733]  [<ffffffffa017c6b8>] i82975x_init_one+0x2e6/0x3e6 [i82975x_edac]
...

Fix bug reported at:
	https://bugzilla.redhat.com/show_bug.cgi?id=848149
And, very likely:
	https://bbs.archlinux.org/viewtopic.php?id=148033
	https://bugzilla.kernel.org/show_bug.cgi?id=47171

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-25 07:17:01 -02:00