The default value of idle interval is 2 mins, but for most time when
screen shutdown, there are still operations during the 2 mins interval,
and gc's sleep time is about 30 secs to 60 secs, so there is almost no
chance for GC thread to do garbage collecting.
Set default value of idle interval value from 2 mins to 5 secs for
fixing.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch reverts 19a5f5e2ef (f2fs: drop any block plugging),
and adds blk_plug in write paths additionally.
The main reason is that blk_start_plug can be used to wake up from low-power
mode before submitting further bios.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Datas in file can be operated by GC and DIO simultaneously, so we will
face race case as below:
For write case:
Thread A Thread B
- generic_file_direct_write
- invalidate_inode_pages2_range
- f2fs_direct_IO
- do_blockdev_direct_IO
- do_direct_IO
- get_more_blocks
- f2fs_gc
- do_garbage_collect
- gc_data_segment
- move_data_page
- do_write_data_page
migrate data block to new block address
- dio_bio_submit
update user data to old block address
For read case:
Thread A Thread B
- generic_file_direct_write
- invalidate_inode_pages2_range
- f2fs_direct_IO
- do_blockdev_direct_IO
- do_direct_IO
- get_more_blocks
- f2fs_balance_fs
- f2fs_gc
- do_garbage_collect
- gc_data_segment
- move_data_page
- do_write_data_page
migrate data block to new block address
- write_checkpoint
- do_checkpoint
- clear_prefree_segments
- f2fs_issue_discard
discard old block adress
- dio_bio_submit
update user buffer from obsolete block address
In order to fix this, for one file, we should let DIO and GC getting exclusion
against with each other.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In 1TB storage, we need to admit 22841 prefree segments, which can consume
too much segments.
This patch sets 8GB in max. prefree segments in that case.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This is to fix wrong error pointer handling flow reported by Dan.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
With below test steps, f2fs will issue redundant discard when doing fstrim,
the reason is that we issue discards for both prefree segments and
consecutive freed region user wants to trim, part regions they covered are
overlapped, here, we change to do not to issue any discards for prefree
segments in trimmed range.
1. mount -t f2fs -o discard /dev/zram0 /mnt/f2fs
2. fstrim -o 0 -l 3221225472 -m 2097152 -v /mnt/f2fs/
3. dd if=/dev/zero of=/mnt/f2fs/a bs=2M count=1
4. dd if=/dev/zero of=/mnt/f2fs/b bs=1M count=1
5. sync
6. rm /mnt/f2fs/a /mnt/f2fs/b
7. fstrim -o 0 -l 3221225472 -m 2097152 -v /mnt/f2fs/
Before:
<...>-5428 [001] ...1 9511.052125: f2fs_issue_discard: dev = (251,0), blkstart = 0x2200, blklen = 0x200
<...>-5428 [001] ...1 9511.052787: f2fs_issue_discard: dev = (251,0), blkstart = 0x2200, blklen = 0x300
After:
<...>-6764 [000] ...1 9720.382504: f2fs_issue_discard: dev = (251,0), blkstart = 0x2200, blklen = 0x300
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch skip discard block range smaller than trim_minlen,
and can not be merged by neighbour
Signed-off-by: Yunlei He <heyunlei@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As manual described, f_bfree indicates total free blocks in fs, in f2fs, it
includes two parts: visible free blocks and over-provision blocks. This
patch corrrects the calculation.
fsblkcnt_t f_bfree; /* free blocks in fs */
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds f2fs_set_page_dirty_nobuffer() copied from __set_page_dirty_buffer.
When appending 4KB blocks in f2fs on pmem with multiple cores, this improves the
overall performance.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When base_addr is NULL, there is no need to call kzfree,
it should return -ENOMEM directly. Additionally, it is
better to initialize variable 'error' with 0.
Signed-off-by: Tiezhu Yang <kernelpatch@126.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If we fail to move data page during foreground GC, we should give another
chance to writeback that page which was set dirty previously by writer.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In procedure of synchonized read, after sending out the read request, reader
will try to lock the page for waiting device to finish the read jobs and
unlock the page, but meanwhile, truncater will race with reader, so after
reader get lock of the page, it should check page's mapping to detect
whether someone has truncated the page in advance, then reader has the
chance to do the retry if truncation was done, otherwise read can be failed
due to previous condition check.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For encrypted inode, if user overwrites data of the inode, f2fs will read
encrypted data into page cache, and then do the decryption.
However reader can race with overwriter, and it will see encrypted data
which has not been decrypted by overwriter yet. Fix it by moving decrypting
work to background and keep page non-uptodated until data is decrypted.
Thread A Thread B
- f2fs_file_write_iter
- __generic_file_write_iter
- generic_perform_write
- f2fs_write_begin
- f2fs_submit_page_bio
- generic_file_read_iter
- do_generic_file_read
- lock_page_killable
- unlock_page
- copy_page_to_iter
hit the encrypted data in updated page
- lock_page
- fscrypt_decrypt_page
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The f2fs_map_blocks is very related to the performance, so let's avoid any
latency to read ahead node pages.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The readahead nat pages are more likely to be reclaimed quickly, so it'd better
to gather more free nids in advance.
And, let's keep some free nids as much as possible.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If dotdot directory is corrupted, its slot may be ocupied by another
file. In this case, dentry[1] is not the parent directory. Rename and
cross-rename will update the inode in dentry[1] incorrectly. This
patch finds dotdot dentry by name.
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
[Jaegeuk Kim: remove wron bug_on]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
mkdir sync_dirty_inode
- init_inode_metadata
- lock_page(node)
- make_empty_dir
- filemap_fdatawrite()
- do_writepages
- lock_page(data)
- write_page(data)
- lock_page(node)
- f2fs_init_acl
- error
- truncate_inode_pages
- lock_page(data)
So, we don't need to truncate data pages in this error case, which will
be done by f2fs_evict_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This mount option is to enable original log-structured filesystem forcefully.
So, there should be no random writes for main area.
Especially, this supports host-managed SMR device.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In f2fs, we don't need to keep block plugging for NODE and DATA writes, since
we already merged bios as much as possible.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There is a data race between allocate_data_block() and f2fs_sbumit_page_mbio(),
which incur unnecessary reversed bio submission.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
FI_DIRTY_INODE flag is not covered by inode page lock, so it can be unset
at any time like below.
Thread #1 Thread #2
- lock_page(ipage)
- update i_fields
- update i_size/i_blocks/and so on
- set FI_DIRTY_INODE
- reset FI_DIRTY_INODE
- set_page_dirty(ipage)
In this case, we can lose the latest i_field information.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, f2fs_write_data_pages() calls __f2fs_writepage() which calls
f2fs_write_data_page().
If f2fs_write_data_page() returns AOP_WRITEPAGE_ACTIVATE, __f2fs_writepage()
calls mapping_set_error(). But, this should not happen at every time, since
sometimes f2fs_write_data_page() tries to skip writing pages without error.
For example, volatile_write() gives EIO all the time, as Shuoran Liu pointed
out.
Reported-by: Shuoran Liu <liushuoran@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Now we can report an error to f2fs_lookup given by f2fs_find_entry.
Suggested-by: He YunLei <heyunlei@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Commit aaf9607516 ("f2fs: check node page
contents all the time") pointed out that "sometimes it was reported that
its contents was missing", so it checks the page's mapping and contents.
When "nid != nid_of_node(page)", ERR_PTR(-EIO) will be returned to the
caller. However, commit e1c51b9f1d ("f2fs:
clean up node page updating flow") moves "nid != nid_of_node(page)" test
to "f2fs_bug_on(sbi, nid != nid_of_node(page))", this will return a
wrong page to the caller when F2FS_CHECK_FS is off when "sometimes it
was reported that its contents was missing" happens.
This patch restores to check node page contents all the time, and
returns the errno to make the caller known something is wrong and avoid
to use the page. This patch also moves f2fs_bug_on to its proper location.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If there is no cold page, we don't need to do a loop to flush dirty
data pages.
On /dev/pmem0,
1. dd if=/dev/zero of=/mnt/test/testfile bs=1M count=2048 conv=fsync
Before : 1.1 GB/s
After : 1.2 GB/s
2. dd if=/dev/zero of=/mnt/test/testfile bs=1M count=2048
Before : 2.2 GB/s
After : 2.3 GB/s
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For data pages, let's try to flush as much as possible in background.
On /dev/pmem0,
1. dd if=/dev/zero of=/mnt/test/testfile bs=1M count=2048 conv=fsync
Before : 800 MB/s
After : 1.1 GB/s
2. dd if=/dev/zero of=/mnt/test/testfile bs=1M count=2048
Before : 1.3 GB/s
After : 2.2 GB/s
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If we get ENOMEM or EIO in f2fs_find_entry, we should stop right away.
Otherwise, for example, we can get duplicate directory entry by ->chash and
->clevel.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch removes writepages lock.
We can improve multi-threading performance.
tiobench, 32 threads, 4KB write per fsync on SSD
Before: 25.88 MB/s
After: 28.03 MB/s
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Chao Yu
Jaegeuk Kim
Yunlei He
Tiezhu Yang
Sheng Yong
Yunlong Song