When an attribute group is created with sysfs_create_group(), the
->sysfs_ops() callback is set to kobj_sysfs_ops, which sets the ->show()
callback to kobj_attr_show(). kobj_attr_show() uses container_of() to
get the ->show() callback from the attribute it was passed, meaning the
->show() callback needs to be the same type as the ->show() callback in
'struct kobj_attribute'.
However, show_dynamic_id() has the type of the ->show() callback in
'struct device_attribute', which causes a CFI violation when opening the
'id' sysfs node under drm/card0/metrics. This happens to work because
the layout of 'struct kobj_attribute' and 'struct device_attribute' are
the same, so the container_of() cast happens to allow the ->show()
callback to still work.
Change the type of show_dynamic_id() to match the ->show() callback in
'struct kobj_attributes' and update the type of sysfs_metric_id to
match, which resolves the CFI violation.
Fixes: f89823c212 ("drm/i915/perf: Implement I915_PERF_ADD/REMOVE_CONFIG interface")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220513075136.1027007-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 18fb42db05)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
UAPI Changes:
- Weak parallel submission support for execlists
Minimal implementation of the parallel submission support for
execlists backend that was previously only implemented for GuC.
Support one sibling non-virtual engine.
Core Changes:
- Two backmerges of drm/drm-next for header file renames/changes and
i915_regs reorganization
Driver Changes:
- Add new DG2 subplatform: DG2-G12 (Matt R)
- Add new DG2 workarounds (Matt R, Ram, Bruce)
- Handle pre-programmed WOPCM registers for DG2+ (Daniele)
- Update guc shim control programming on XeHP SDV+ (Daniele)
- Add RPL-S C0/D0 stepping information (Anusha)
- Improve GuC ADS initialization to work on ARM64 on dGFX (Lucas)
- Fix KMD and GuC race on accessing PMU busyness (Umesh)
- Use PM timestamp instead of RING TIMESTAMP for reference in PMU with GuC (Umesh)
- Report error on invalid reset notification from GuC (John)
- Avoid WARN splat by holding RPM wakelock during PXP unbind (Juston)
- Fixes to parallel submission implementation (Matt B.)
- Improve GuC loading status check/error reports (John)
- Tweak TTM LRU priority hint selection (Matt A.)
- Align the plane_vma to min_page_size of stolen mem (Ram)
- Introduce vma resources and implement async unbinding (Thomas)
- Use struct vma_resource instead of struct vma_snapshot (Thomas)
- Return some TTM accel move errors instead of trying memcpy move (Thomas)
- Fix a race between vma / object destruction and unbinding (Thomas)
- Remove short-term pins from execbuf (Maarten)
- Update to GuC version 69.0.3 (John, Michal Wa.)
- Improvements to GT reset paths in GuC backend (Matt B.)
- Use shrinker_release_pages instead of writeback in shmem object hooks (Matt A., Tvrtko)
- Use trylock instead of blocking lock when freeing GEM objects (Maarten)
- Allocate intel_engine_coredump_alloc with ALLOW_FAIL (Matt B.)
- Fixes to object unmapping and purging (Matt A)
- Check for wedged device in GuC backend (John)
- Avoid lockdep splat by locking dpt_obj around set_cache_level (Maarten)
- Allow dead vm to unbind vma's without lock (Maarten)
- s/engine->i915/i915/ for DG2 engine workarounds (Matt R)
- Use to_gt() helper for GGTT accesses (Michal Wi.)
- Selftest improvements (Matt B., Thomas, Ram)
- Coding style and compiler warning fixes (Matt B., Jasmine, Andi, Colin, Gustavo, Dan)
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Yg4i2aCZvvee5Eai@jlahtine-mobl.ger.corp.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Fixed conflicts while applying, using the fixups/drm-intel-gt-next.patch
from drm-rerere's 1f2b1742abdd ("2022y-02m-23d-16h-07m-57s UTC: drm-tip
rerere cache update")]
Backmerge to bring in 5.17-rc2 to introduce a common baseline
to merge i915_regs changes from drm-intel-next.
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
This is a huge, chaotic mass of registers copied over as-is without any
real cleanup. We'll come back and organize these better, align on
consistent coding style, remove dead code, etc. in separate patches
later that will be easier to review.
v2:
- Add missing include in intel_pxp_irq.c
v3:
- Correct a few indentation errors (Lucas)
- Minor conflict resolution
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127234334.4016964-6-matthew.d.roper@intel.com
The various MI_PREDICATE registers have per-engine instances. Today we
only utilize the RCS0 instance of each, but that will likely change in
the future; switch to parameterized register definitions to make these
easier to work with going forward.
Of special note is MI_PREDICATE_RESULT_2; we only use it in one place in
the driver today in HSW-specific code. It turns out that the bspec
(page 94) lists two different offsets for this register on HSW; one is
in the standard location shared by all other platforms (base + 0x3bc)
and the other is an unusual location (0x2214). We're using the second,
non-standard offset in i915 today; that offset doesn't exist on any
other platforms (and it's not even 100% clear that it's correct for HSW)
so I've renamed the current non-standard definition to
HSW_MI_PREDICATE_RESULT_2; the new cross-platform parameterized macro
(which is still unused at the moment) uses the standard offset.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127234334.4016964-5-matthew.d.roper@intel.com
At the moment we only use R_PWR_CLK_STATE in the context of the RCS
engine, but upcoming support for compute engines will start using
instances relative to the CCS engine base offsets. Let's parameterize
the register and move it to the engine reg header.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127234334.4016964-4-matthew.d.roper@intel.com
Let's use 'struct i915_range' to express sets of b-counter and mux
registers in the perf code. This makes the code more similar to how we
handle things like multicast register ranges, forcewake tables, shadow
tables, etc. and also lets us avoid needing symbolic register name
definitions for the various range end points. With this change, many of
the OA register definitions are no longer used in the code, so we can
drop their #define's for simplicity.
v2: Drop 'inline' from reg_in_range_table(). (Jani)
v3: Split the first range in gen12_oa_mux_regs[] so that 0xd08 isn't
whitelisted. (Umesh)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127234334.4016964-3-matthew.d.roper@intel.com
The OA unit registers are only used by the perf code; move them to their
own header file.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127234334.4016964-2-matthew.d.roper@intel.com
Catch-up with 5.17-rc2 and trying to align with drm-intel-gt-next
for a possible topic branch for merging the split of i915_regs...
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Let's continue breaking up and cleaning up the massive i915_reg.h file
by moving all registers that are defined in relation to an engine base
to their own header.
There are probably a bunch of other "engine registers" that we haven't
moved yet (especially those that belong to the render engine in the
0x2??? range), but this is a relatively straightforward first step.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220111051600.3429104-8-matthew.d.roper@intel.com
GGTT is currently available both through i915->ggtt and gt->ggtt, and we
eventually want to get rid of the i915->ggtt one.
Use to_gt() for all i915->ggtt accesses to help with the future
refactoring.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220104223550.56135-1-andi.shyti@linux.intel.com
Use to_gt() helper consistently throughout the codebase.
Pure mechanical s/i915->gt/to_gt(i915). No functional changes.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214193346.21231-10-andi.shyti@linux.intel.com
With all the users removed, finish removing the CNL platform definitions.
We will leave the PCI IDs around as those are exposed to userspace.
Even if mesa doesn't support CNL anymore, let's avoid build breakages
due to changing the headers.
Also, due to drm/i915/gt still using IS_CANNONLAKE() let's just redefine
it instead of removing.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728215946.1573015-26-lucas.demarchi@intel.com
Xe_HP changes the format of the context ID from past platforms.
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-9-matthew.d.roper@intel.com
If the driver was not fully loaded, we may still have globals lying
around. If we don't tear those down in i915_exit(), we'll leak a bunch
of memory slabs. This can happen two ways: use_kms = false and if we've
run mock selftests. In either case, we have an early exit from
i915_init which happens after i915_globals_init() and we need to clean
up those globals.
The mock selftests case is especially sticky. The load isn't entirely
a no-op. We actually do quite a bit inside those selftests including
allocating a bunch of mock objects and running tests on them. Once all
those tests are complete, we exit early from i915_init(). Perviously,
i915_init() would return a non-zero error code on failure and a zero
error code on success. In the success case, we would get to i915_exit()
and check i915_pci_driver.driver.owner to detect if i915_init exited early
and do nothing. In the failure case, we would fail i915_init() but
there would be no opportunity to clean up globals.
The most annoying part is that you don't actually notice the failure as
part of the self-tests since leaking a bit of memory, while bad, doesn't
result in anything observable from userspace. Instead, the next time we
load the driver (usually for next IGT test), i915_globals_init() gets
invoked again, we go to allocate a bunch of new memory slabs, those
implicitly create debugfs entries, and debugfs warns that we're trying
to create directories and files that already exist. Since this all
happens as part of the next driver load, it shows up in the dmesg-warn
of whatever IGT test ran after the mock selftests.
While the obvious thing to do here might be to call i915_globals_exit()
after selftests, that's not actually safe. The dma-buf selftests call
i915_gem_prime_export which creates a file. We call dma_buf_put() on
the resulting dmabuf which calls fput() on the file. However, fput()
isn't immediate and gets flushed right before syscall returns. This
means that all the fput()s from the selftests don't happen until right
before the module load syscall used to fire off the selftests returns
which is after i915_init(). If we call i915_globals_exit() in
i915_init() after selftests, we end up freeing slabs out from under
objects which won't get released until fput() is flushed at the end of
the module load syscall.
The solution here is to let i915_init() return success early and detect
the early success in i915_exit() and only tear down globals and nothing
else. This way the module loads successfully, regardless of the success
or failure of the tests. Because we've not enumerated any PCI devices,
no device nodes are created and it's entirely useless from userspace.
The only thing the module does at that point is hold on to a bit of
memory until we unload it and i915_exit() is called. Importantly, this
means that everything from our selftests has the ability to properly
flush out between i915_init() and i915_exit() because there is at least
one syscall boundary in between.
In order to handle all the delicate init/exit cases, we convert the
whole thing to a table of init/exit pairs and track the init status in
the new init_progress global. This allows us to ensure that i915_exit()
always tears down exactly the things that i915_init() successfully
initialized. We also allow early-exit of i915_init() without failure by
an init function returning > 0. This is useful for nomodeset, and
selftests. For the mock selftests, we convert them to always return 1
so we get the desired behavior of the driver always succeeding to load
the driver and then properly tearing down the partially loaded driver.
v2 (Tvrtko Ursulin):
- Guard init_funcs[i].exit with GEM_BUG_ON(i >= ARRAY_SIZE(init_funcs))
v2 (Daniel Vetter):
- Update the docstring for i915.mock_selftests
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721152358.2893314-4-jason@jlekstrand.net
We're about to start doing lazy context creation which means contexts
get created in i915_gem_context_lookup and we may start having more
errors than -ENOENT.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-23-jason@jlekstrand.net
This was done by the following semantic patch:
@@ expression i915; @@
- INTEL_GEN(i915)
+ GRAPHICS_VER(i915)
@@ expression i915; expression E; @@
- INTEL_GEN(i915) >= E
+ GRAPHICS_VER(i915) >= E
@@ expression dev_priv; expression E; @@
- !IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) != E
@@ expression dev_priv; expression E; @@
- IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) == E
@@
expression dev_priv;
expression from, until;
@@
- IS_GEN_RANGE(dev_priv, from, until)
+ IS_GRAPHICS_VER(dev_priv, from, until)
@def@
expression E;
identifier id =~ "^gen$";
@@
- id = GRAPHICS_VER(E)
+ ver = GRAPHICS_VER(E)
@@
identifier def.id;
@@
- id
+ ver
It also takes care of renaming the variable we assign to GRAPHICS_VER()
so to use "ver" rather than "gen".
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210606045050.103862-2-lucas.demarchi@intel.com
UAPI Changes:
- Add reworked uAPI for DG1 behind CONFIG_BROKEN (Matt A, Abdiel)
Driver Changes:
- Fix for Gitlab issues #3293 and #3450:
Avoid kernel crash on older L-shape memory machines
- Add Wa_14010733141 (VDBox SFC reset) for Gen11+ (Aditya)
- Fix crash in auto_retire active retire callback due to
misalignment (Stephane)
- Fix overlay active retire callback alignment (Tvrtko)
- Eliminate need to align active retire callbacks (Matt A, Ville,
Daniel)
- Program FF_MODE2 tuning value for all Gen12 platforms (Caz)
- Add Wa_14011060649 for TGL,RKL,DG1 and ADLS (Swathi)
- Create stolen memory region from local memory on DG1 (CQ)
- Place PD in LMEM on dGFX (Matt A)
- Use WC when default state object is allocated in LMEM (Venkata)
- Determine the coherent map type based on object location (Venkata)
- Use lmem physical addresses for fb_mmap() on discrete (Mohammed)
- Bypass aperture on fbdev when LMEM is available (Anusha)
- Return error value when displayable BO not in LMEM for dGFX (Mohammed)
- Do release kernel context if breadcrumb measure fails (Janusz)
- Hide modparams for compiled-out features (Tvrtko)
- Apply Wa_22010271021 for all Gen11 platforms (Caz)
- Fix unlikely ref count race in arming the watchdog timer (Tvrtko)
- Check actual RC6 enable status in PMU (Tvrtko)
- Fix a double free in gen8_preallocate_top_level_pdp (Lv)
- Use trylock in shrinker for GGTT on BSW VT-d and BXT (Maarten)
- Remove erroneous i915_is_ggtt check for
I915_GEM_OBJECT_UNBIND_VM_TRYLOCK (Maarten)
- Convert uAPI headers to real kerneldoc (Matt A)
- Clean up kerneldoc warnings headers (Matt A, Maarten)
- Fail driver if LMEM training failed (Matt R)
- Avoid div-by-zero on Gen2 (Ville)
- Read C0DRB3/C1DRB3 as 16 bits again and add _BW suffix (Ville)
- Remove reference to struct drm_device.pdev (Thomas)
- Increase separation between GuC and execlists code (Chris, Matt B)
- Use might_alloc() (Bernard)
- Split DGFX_FEATURES from GEN12_FEATURES (Lucas)
- Deduplicate Wa_22010271021 programming on (Jose)
- Drop duplicate WaDisable4x2SubspanOptimization:hsw (Tvrtko)
- Selftest improvements (Chris, Hsin-Yi, Tvrtko)
- Shuffle around init_memory_region for stolen (Matt)
- Typo fixes (wengjianfeng)
[airlied: fix conflict with fixes in i915_active.c]
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YLCbBR22BsQ/dpJB@jlahtine-mobl.ger.corp.intel.com
Since we setup the submission method for the engines once, it is easy to
assign an enum and use that instead of probing into the backends.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210521183215.65451-3-matthew.brost@intel.com
Enable relevant OA formats for ADL_P.
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210512042144.2089071-8-matthew.d.roper@intel.com
SAMPLE_OA parameter enables sampling of OA buffer and results in a call
to init the OA buffer which initializes the OA unit head/tail pointers.
The OA_EXPONENT parameter controls the periodicity of the OA reports in
the OA buffer and results in starting a hrtimer.
Before gen12, all use cases required the use of the OA buffer and i915
enforced this setting when vetting out the parameters passed. In these
platforms the hrtimer was enabled if OA_EXPONENT was passed. This worked
fine since it was implied that SAMPLE_OA is always passed.
With gen12, this changed. Users can use perf without enabling the OA
buffer as in OAR use cases. While an OAR use case should ideally not
start the hrtimer, we see that passing an OA_EXPONENT parameter will
start the hrtimer even though SAMPLE_OA is not specified. This results
in an uninitialized OA buffer, so the head/tail pointers used to track
the buffer are zero.
This itself does not fail, but if we ran a use-case that SAMPLED the OA
buffer previously, then the OA_TAIL register is still pointing to an old
value. When the timer callback runs, it ends up calculating a
wrong/large number of available reports. Since we do a spinlock_irq_save
and start processing a large number of reports, NMI watchdog fires and
causes a crash.
Start the timer only if SAMPLE_OA is specified.
v2:
- Drop SAMPLE OA check when appending samples (Ashutosh)
- Prevent read if OA buffer is not being sampled
Fixes: 00a7f0d715 ("drm/i915/tgl: Add perf support on TGL")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210305210947.58751-1-umesh.nerlige.ramappa@intel.com
After fixing the OA_TAIL_PTR corruption, there are no more reports with
reason field of zero. Drop the check for report reason.
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210210190106.8586-1-umesh.nerlige.ramappa@intel.com
Gen12 supports additional OA formats as compared to what was added
earlier. Include the additional OA formats.
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208174029.45621-3-umesh.nerlige.ramappa@intel.com
Variations in OA formats in the different gens has led to creation of
several sparse arrays to store the formats.
Move oa formats into a single array and format_mask to check for
platform specific oa formats.
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208174029.45621-2-umesh.nerlige.ramappa@intel.com
Validity of an OA format is checked by using a sparse array of formats
per gen. Instead maintain a mask of supported formats for a platform in
the perf object.
v2: Use set_bit and test_bit style for the format_mask (Chris)
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208174029.45621-1-umesh.nerlige.ramappa@intel.com
UAPI Changes:
- Deprecate I915_PMU_LAST and optimize state tracking (Tvrtko)
Avoid relying on last item ABI marker in i915_drm.h, add a
comment to mark as deprecated.
Cross-subsystem Changes:
Core Changes:
Driver Changes:
- Restore clear residuals security mitigations for Ivybridge and
Baytrail (Chris)
- Close#1858: Allow sysadmin to choose applied GPU security mitigations
through i915.mitigations=... similar to CPU (Chris)
- Fix for #2024: GPU hangs on HSW GT1 (Chris)
- Fix for #2707: Driver hang when editing UVs in Blender (Chris, Ville)
- Fix for #2797: False positive GuC loading error message (Chris)
- Fix for #2859: Missing GuC firmware for older Cometlakes (Chris)
- Lessen probability of GPU hang due to DMAR faults [reason 7,
next page table ptr is invalid] on Tigerlake (Chris)
- Fix REVID macros for TGL to fetch correct stepping (Aditya)
- Limit frequency drop to RPe on parking (Chris, Edward)
- Limit W/A 1406941453 to TGL, RKL and DG1 (Swathi)
- Make W/A 22010271021 permanent on DG1 (Lucas)
- Implement W/A 16011163337 to prevent a HS/DS hang on DG1 (Swathi)
- Only disable preemption on gen8 render engines (Chris)
- Disable arbitration around Braswell's PDP updates (Chris)
- Disable arbitration on no-preempt requests (Chris)
- Check for arbitration after writing start seqno before busywaiting (Chris)
- Retain default context state across shrinking (Venkata, CQ)
- Fix mismatch between misplaced vma check and vma insert for 32-bit
addressing userspaces (Chris, CQ)
- Propagate error for vmap() failure instead kernel NULL deref (Chris)
- Propagate error from cancelled submit due to context closure
immediately (Chris)
- Fix RCU race on HWSP tracking per request (Chris)
- Clear CMD parser shadow and GPU reloc batches (Matt A)
- Populate logical context during first pin (Maarten)
- Optimistically prune dma-resv from the shrinker (Chris)
- Fix for virtual engine ownership race (Chris)
- Remove timeslice suppression to restore fairness for virtual engines (Chris)
- Rearrange IVB/HSW workarounds properly between GT and engine (Chris)
- Taint the reset mutex with the shrinker (Chris)
- Replace direct submit with direct call to tasklet (Chris)
- Multiple corrections to virtual engine dequeue and breadcrumbs code (Chris)
- Avoid wakeref from potentially hard IRQ context in PMU (Tvrtko)
- Use raw clock for RC6 time estimation in PMU (Tvrtko)
- Differentiate OOM failures from invalid map types (Chris)
- Fix Gen9 to have 64 MOCS entries similar to Gen11 (Chris)
- Ignore repeated attempts to suspend request flow across reset (Chris)
- Remove livelock from "do_idle_maps" VT-d W/A (Chris)
- Cancel the preemption timeout early in case engine reset fails (Chris)
- Code flow optimization in the scheduling code (Chris)
- Clear the execlists timers upon reset (Chris)
- Drain the breadcrumbs just once (Chris, Matt A)
- Track the overall GT awake/busy time (Chris)
- Tweak submission tasklet flushing to avoid starvation (Chris)
- Track timelines created using the HWSP to restore on resume (Chris)
- Use cmpxchg64 for 32b compatilibity for active tracking (Chris)
- Prefer recycling an idle GGTT fence to avoid GPU wait (Chris)
- Restructure GT code organization for clearer split between GuC
and execlists (Chris, Daniele, John, Matt A)
- Remove GuC code that will remain unused by new interfaces (Matt B)
- Restructure the CS timestamp clocks code to local to GT (Chris)
- Fix error return paths in perf code (Zhang)
- Replace idr_init() by idr_init_base() in perf (Deepak)
- Fix shmem_pin_map error path (Colin)
- Drop redundant free_work worker for GEM contexts (Chris, Mika)
- Increase readability and understandability of intel_workarounds.c (Lucas)
- Defer enabling the breadcrumb interrupt to after submission (Chris)
- Deal with buddy alloc block sizes beyond 4G (Venkata, Chris)
- Encode fence specific waitqueue behaviour into the wait.flags (Chris)
- Don't cancel the breadcrumb interrupt shadow too early (Chris)
- Cancel submitted requests upon context reset (Chris)
- Use correct locks in GuC code (Tvrtko)
- Prevent use of engine->wa_ctx after error (Chris, Matt R)
- Fix build warning on 32-bit (Arnd)
- Avoid memory leak if platform would have more than 16 W/A (Tvrtko)
- Avoid unnecessary #if CONFIG_PM in PMU code (Chris, Tvrtko)
- Improve debugging output (Chris, Tvrtko, Matt R)
- Make file local variables static (Jani)
- Avoid uint*_t types in i915 (Jani)
- Selftest improvements (Chris, Matt A, Dan)
- Documentation fixes (Chris, Jose)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# drivers/gpu/drm/i915/gt/intel_breadcrumbs.c
# drivers/gpu/drm/i915/gt/intel_breadcrumbs_types.h
# drivers/gpu/drm/i915/gt/intel_lrc.c
# drivers/gpu/drm/i915/gvt/mmio_context.h
# drivers/gpu/drm/i915/i915_drv.h
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114152232.GA21588@jlahtine-mobl.ger.corp.intel.com
Pull the GT clock information [used to derive CS timestamps and PM
interval] under the GT so that is it local to the users. In doing so, we
consolidate the two references for the same information, of which the
runtime-info took note of a potential clock source override and scaling
factors.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201223122359.22562-2-chris@chris-wilson.co.uk
Split the definition, construction and updating of the Logical Ring
Context from the execlist submission interface. The LRC is used by the
HW, irrespective of our different submission backends.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201219020343.22681-1-chris@chris-wilson.co.uk
We want to separate the utility functions for controlling the logical
ring context from the execlists submission mechanism (which is an
overgrown scheduler).
This is similar to Daniele's work to split up the files, but being
selfish I wanted to base it after my own changes to intel_lrc.c petered
out.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201209233618.4287-2-chris@chris-wilson.co.uk
drm/i915 features for v5.11:
Highlights:
- Enable big joiner to join two pipes to one port to overcome pipe restrictions
(Manasi, Ville, Maarten)
Display:
- More DG1 enabling (Lucas, Aditya)
- Fixes to cases without display (Lucas, José, Jani)
- Initial PSR state improvements (José)
- JSL eDP vswing updates (Tejas)
- Handle EDID declared max 16 bpc (Ville)
- Display refactoring (Ville)
Other:
- GVT features
- Backmerge
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87czzzkk1s.fsf@intel.com
idr_init() uses base 0 which is an invalid identifier. The new function
idr_init_base allows IDR to set the ID lookup from base 1. This avoids
all lookups that otherwise starts from 0 since 0 is always unused.
References: commit 6ce711f275 ("idr: Make 1-based IDRs more efficient")
Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201104150339.GA68663@localhost
After having written the entire OA buffer with reports, the HW will
write again at the beginning of the OA buffer. It'll indicate it by
setting the WRAP bits in the OASTATUS register.
When a wrap happens and that at the end of the read vfunc we write the
OASTATUS register back to clear the REPORT_LOST bit, we sometimes see
that the OATAILPTR register is reset to a previous position on Gen8/9
(apparently not the case on Gen11+). This leads the next call to the
read vfunc to process reports we've already read. Because we've marked
those as read by clearing the reason & timestamp dwords, they're
discarded and a "Skipping spurious, invalid OA report" message is
emitted.
The workaround to avoid this OATAILPTR value reset seems to be to set
the wrap bits when writing back OASTATUS.
This change has no impact on userspace, it only avoids a bunch of
DRM_NOTE("Skipping spurious, invalid OA report\n") messages.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 19f81df285 ("drm/i915/perf: Add OA unit support for Gen 8+")
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117130124.829979-1-lionel.g.landwerlin@intel.com
We have the ordering of timeline->mutex vs resv_lock wrong,
convert the i915_pin_vma and intel_context_pin as well to
future-proof this.
We may need to do future changes to do this more transaction-like,
and only get down to a single i915_gem_ww_ctx, but for now this
should work.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-18-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
MI_STORE_REGISTER_MEM and MI_LOAD_REGISTER_MEM need to know which
translation to use when saving restoring the engine general purpose
registers to and from the GT scratch. Since GT scratch is mapped to
ggtt, we need to set an additional bit in the command to use GTT.
Fixes: daed3e4439 ("drm/i915/perf: implement active wait for noa configurations")
Suggested-by: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200709224504.11345-1-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Some objects we map once during their construction, and then never
access their mappings again, even if they are kept around for the
duration of the driver. Keeping those pages mapped, often vmapped, is
therefore wasteful and we should release the maps as soon as we no
longer need them.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708173748.32734-3-chris@chris-wilson.co.uk
SSEUs are a GT capability, so track them under gt_info.
Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708003952.21831-8-daniele.ceraolospurio@intel.com
Nathan Chancellor
Tvrtko Ursulin
Rodrigo Vivi
Jani Nikula
Ramalingam C
Joonas Lahtinen
Matt Roper
Luis Chamberlain
Colin Ian King
Michał Winiarski
Dave Airlie
Lucas De Marchi
Stuart Summers
Jason Ekstrand
Chris Wilson
Umesh Nerlige Ramappa
Maarten Lankhorst
Lionel Landwerlin
Deepak R Varma
Mauro Carvalho Chehab
Venkata Sandeep Dhanalakota