Граф коммитов

35 Коммитов

Автор SHA1 Сообщение Дата
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Anton Blanchard 8555a0029b [POWERPC] Optimise some TOC usage
Micro-optimisation - add no-minimal-toc to some more arch/powerpc Makefiles.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-15 19:31:25 +10:00
Jon Mason 0a9cb46a73 [PATCH] remove powerpc bitops in favor of existing generic bitops
There already exists a big endian safe bitops implementation in
lib/find_next_bit.c.  The code in it is 90%+ common with the powerpc
specific version, so the powerpc version is redundant.  This patch
makes the necessary changes to use the generic bitops in powerpc, and
removes the powerpc specific version.

Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-24 16:08:58 +10:00
Stephen Rothwell af308377e2 [PATCH] powerpc: fix various sparse warnings
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-27 14:48:08 +11:00
Linus Torvalds 3cbb90a9cb powerpc: fix strncasecmp prototype
It takes a size_t, not an int, as its third argument.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25 09:41:40 -08:00
Michael Ellerman 584fc6d111 [PATCH] powerpc: Add strne2a() to convert a string from EBCDIC to ASCII
Add strne2a() which converts a string from EBCDIC to ASCII.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-22 15:04:25 +11:00
Jon Mason 2ef9481e66 [PATCH] powerpc: trivial: modify comments to refer to new location of files
This patch removes all self references and fixes references to files
in the now defunct arch/ppc64 tree.  I think this accomplises
everything wanted, though there might be a few references I missed.

Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-10 16:53:51 +11:00
David Gibson 3356bb9f7b [PATCH] powerpc: Remove lppaca structure from the PACA
At present the lppaca - the structure shared with the iSeries
hypervisor and phyp - is contained within the PACA, our own low-level
per-cpu structure.  This doesn't have to be so, the patch below
removes it, making a separate array of lppaca structures.

This saves approximately 500*NR_CPUS bytes of image size and kernel
memory, because we don't need aligning gap between the Linux and
hypervisor portions of every PACA.  On the other hand it means an
extra level of dereference in many accesses to the lppaca.

The patch also gets rid of several places where we assign the paca
address to a local variable for no particular reason.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-13 21:17:39 +11:00
Paul Mackerras 00557b59c6 powerpc: Fix find_next_bit on 32-bit
We had a "64" that didn't get changed to BITS_PER_LONG, resulting
in find_next_bit not working correctly.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 12:01:41 +11:00
Paul Mackerras c613523455 Merge ../linux-2.6 2005-11-07 14:42:09 +11:00
Paul Mackerras 2249ca9d60 powerpc: Various UP build fixes
Mostly this involves adding #include <asm/smp.h>, since that defines
things like boot_cpuid[_phys] and [gs]et_hard_smp_processor_id, which
are SMP-related but still needed on UP.  This incorporates fixes
posted by Olof Johansson and Heikki Lindholm.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-07 13:18:13 +11:00
Benjamin Herrenschmidt 3c726f8dee [PATCH] ppc64: support 64k pages
Adds a new CONFIG_PPC_64K_PAGES which, when enabled, changes the kernel
base page size to 64K.  The resulting kernel still boots on any
hardware.  On current machines with 4K pages support only, the kernel
will maintain 16 "subpages" for each 64K page transparently.

Note that while real 64K capable HW has been tested, the current patch
will not enable it yet as such hardware is not released yet, and I'm
still verifying with the firmware architects the proper to get the
information from the newer hypervisors.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-06 16:56:47 -08:00
Stephen Rothwell aaf8a7a294 Merge iSeries include file move 2005-11-02 16:06:03 +11:00
David Gibson a0e60b2033 [PATCH] powerpc: Merge bitops.h
Here's a revised version.  This re-introduces the set_bits() function
from ppc64, which I removed because I thought it was unused (it exists
on no other arch).  In fact it is used in the powermac interrupt code
(but not on pSeries).

- We use LARXL/STCXL macros to generate the right (32 or 64 bit)
  instructions, similar to LDL/STL from ppc_asm.h, used in fpu.S

- ppc32 previously used a full "sync" barrier at the end of
  test_and_*_bit(), whereas ppc64 used an "isync".  The merged version
  uses "isync", since I believe that's sufficient.

- The ppc64 versions of then minix_*() bitmap functions have changed
  semantics.  Previously on ppc64, these functions were big-endian
  (that is bit 0 was the LSB in the first 64-bit, big-endian word).
  On ppc32 (and x86, for that matter, they were little-endian.  As far
  as I can tell, the big-endian usage was simply wrong - I guess
  no-one ever tried to use minixfs on ppc64.

- On ppc32 find_next_bit() and find_next_zero_bit() are no longer
  inline (they were already out-of-line on ppc64).

- For ppc64, sched_find_first_bit() has moved from mmu_context.h to
  the merged bitops.  What it was doing in mmu_context.h in the first
  place, I have no idea.

- The fls() function is now implemented using the cntlzw instruction
  on ppc64, instead of generic_fls(), as it already was on ppc32.

- For ARCH=ppc, this patch requires adding arch/powerpc/lib to the
  arch/ppc/Makefile.  This in turn requires some changes to
  arch/powerpc/lib/Makefile which didn't correctly handle ARCH=ppc.

Built and running on G5.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01 21:49:02 +11:00
Kelly Daly 1da4403788 merge filename and modify references to iseries/hv_call.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-01 16:59:20 +11:00
Stephen Rothwell 5015b49448 powerpc: fix __strnlen_user in merge tree
Change USER/KERNEL_DS so that the merged version of
__strnlen_user can be used which allows us to complete the
removal of arch/ppc64/lib/.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-01 14:34:17 +11:00
Paul Mackerras 734d652480 powerpc: apply recent changes to merged code
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-31 13:57:01 +11:00
Paul Mackerras f78541dcec powerpc: Merge xmon
The merged version follows the ppc64 version pretty closely mostly,
and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version.
The main difference for ppc64 is that the 'p' command to call
show_state (which was always pretty dodgy) has been replaced by
the ppc32 'p' command, which calls a given procedure (so in fact
the old 'p' command behaviour can be achieved with 'p $show_state').

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 22:53:37 +10:00
Paul Mackerras c032524f0d powerpc: Make single-stepping emulation (mostly) usable on 32-bit
The sc instruction emulation can't be done the same way on 32-bit
as 64-bit yet, but this should work OK.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 22:48:08 +10:00
Stephen Rothwell 299f6ce491 ppc64: use mem_64.S from powerpc/lib
and remove the same bits from ppc64/lib/string.S.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-28 12:54:35 +10:00
Stephen Rothwell a4a264f144 ppc64: use usercopy_64.c from powerpc/lib
since it is identical to usercopy.c from ppc64/lib.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-28 12:54:26 +10:00
Stephen Rothwell a2b0ca84a1 ppc64: user strcase.c from powerpc/lib
since it is identical to strcase.c from ppc64/lib.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-28 12:54:18 +10:00
Stephen Rothwell a0d8bf9cf1 ppc64: use sstep.c from powerpc/lib
since it is identical to sstep.c from ppc64/lib.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-28 12:54:08 +10:00
Stephen Rothwell 12a39407f0 ppc64: use memcpy_64.S from powerpc/lib
since it is identical to mempcy.S from ppc64/lib.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-28 12:53:58 +10:00
Stephen Rothwell ecc81e0f71 ppc64: use lockc.c from powerpc/lib
since it is effectively the same as locks.c from ppc64/lib.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-28 12:53:48 +10:00
Stephen Rothwell 43f35ec35c ppc64: use copyuser_64.S from powerpc/lib
since it is identical to copyuser.S from ppc64/lib.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-28 12:53:37 +10:00
Stephen Rothwell 34faa82841 ppc64: use copypage_64.S from powerpc/lib
since it is identical to copypage.S from ppc64/lib.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-28 12:53:27 +10:00
Stephen Rothwell 454fb016b3 ppc64: use e2a.c from powerpc/lib
since it is identical to e2a.c from ppc64/lib

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-28 12:53:13 +10:00
Stephen Rothwell 1a3c061efd ppc64: use checksum_64.S from powerpc
as it is identical to checksum.S from ppc64.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-28 12:52:58 +10:00
Paul Mackerras 344480b997 powerpc: Fix a corner case in __div64_32
The code was incorrectly doing a division by 0 in the case where
the denominator was 0x100000000 and the divisor was 0xffffffff.
Thanks to Fred Liu of Motorola for pointing this out.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20 09:37:02 +10:00
Stephen Rothwell 7dffb72028 ppc32: use L1_CACHE_SHIFT/L1_CACHE_BYTES
instead of L1_CACHE_LINE_SIZE and LG_L1_CACHE_LINE_SIZE

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-17 11:50:32 +10:00
Paul Mackerras 40ef8cbc6d powerpc: Get 64-bit configs to compile with ARCH=powerpc
This is a bunch of mostly small fixes that are needed to get
ARCH=powerpc to compile for 64-bit.  This adds setup_64.c from
arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:50:37 +10:00
Paul Mackerras b3b8dc6c07 powerpc: Use reg.h instead of processor.h when we just want reg names
Now that the register names and bit definitions are all in reg.h,
use that instead of processor.h in assembly code in a few places.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:20:10 +10:00
Paul Mackerras 70d64ceaa1 powerpc: Rename files to have consistent _32/_64 suffixes
This doesn't change any code, just renames things so we consistently
have foo_32.c and foo_64.c where we have separate 32- and 64-bit
versions.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 21:52:43 +10:00
Paul Mackerras 14cf11af6c powerpc: Merge enough to start building in arch/powerpc.
This creates the directory structure under arch/powerpc and a bunch
of Kconfig files.  It does a first-cut merge of arch/powerpc/mm,
arch/powerpc/lib and arch/powerpc/platforms/powermac.  This is enough
to build a 32-bit powermac kernel with ARCH=powerpc.

For now we are getting some unmerged files from arch/ppc/kernel and
arch/ppc/syslib, or arch/ppc64/kernel.  This makes some minor changes
to files in those directories and files outside arch/powerpc.

The boot directory is still not merged.  That's going to be interesting.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 16:04:21 +10:00