Граф коммитов

480 Коммитов

Автор SHA1 Сообщение Дата
Pierre-Louis Bossart e04e60fce4 soundwire: master: use pm_runtime_set_active() on add
The 'master' device acts as a glue layer used during bus
initialization only, and it needs to be 'transparent' for pm_runtime
management. Its behavior should be that it becomes active when one of
its children becomes active, and suspends when all of its children are
suspended.

In our tests on Intel platforms, we routinely see these sort of
warnings on the initial boot:

[ 21.447345] rt715 sdw:3:25d:715:0: runtime PM trying to activate
child device sdw:3:25d:715:0 but parent (sdw-master-3) is not active

This is root-caused to a missing setup to make the device 'active' on
probe. Since we don't want the device to remain active forever after
the probe, the autosuspend configuration is also enabled at the end of
the probe - the device will actually autosuspend only in the case
where there are no devices physically attached. In practice, the
master device will suspend when all its children are no longer active.

Fixes: bd84256e86 ('soundwire: master: enable pm runtime')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20201124130742.10986-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-12-02 12:49:34 +05:30
Vinod Koul 47edc0104c soundwire: qcom: Fix build failure when slimbus is module
Commit 5bd773242f ("soundwire: qcom: avoid dependency on
CONFIG_SLIMBUS") removed hard dependency on Slimbus for qcom driver but
it results in build failure when: CONFIG_SOUNDWIRE_QCOM=y
CONFIG_SLIMBUS=m

drivers/soundwire/qcom.o: In function `qcom_swrm_probe':
qcom.c:(.text+0xf44): undefined reference to `slimbus_bus'

Fix this by using IS_REACHABLE() in driver which is recommended to be
used with imply.

Fixes: 5bd773242f ("soundwire: qcom: avoid dependency on CONFIG_SLIMBUS")
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20201125055155.GD8403@vkoul-mobl
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-26 09:55:07 +05:30
Pierre-Louis Bossart 47b8520997 soundwire: bus: only clear valid DPN interrupts
Mirror the changes made for DP0 and don't modify reserved fields.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20201124013318.8963-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-25 10:32:26 +05:30
Pierre-Louis Bossart b35991de7a soundwire: bus: only clear valid DP0 interrupts
We should only access the fields that are relevant for DP0, and never
write to reserved or read-only SDCA_CASCADE fields.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20201124013318.8963-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-25 10:32:26 +05:30
Pierre-Louis Bossart 7ffaba042e soundwire: bus: reset slave_notify status at each loop
The code loops multiple times to deal with pending interrupts, but we
never reset the slave_notify status.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20201124013318.8963-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-25 10:32:25 +05:30
Pierre-Louis Bossart 6e06a85556 soundwire: bus: add comments to explain interrupt loop filter
The interrupt handling in SoundWire requires software to re-read the
interrupt status after clearing an interrupt. In case the interrupt is
still outstanding, the code in bus.c will loop a number of times,
however that loop is limited to the interrupts detected in the first
read. This strategy helps meet SoundWire requirements without
remaining forever in an interrupt handler.

Add a couple of comments to document this design.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20201124013318.8963-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-25 10:32:25 +05:30
Pierre-Louis Bossart b7cab9be7c soundwire: SDCA: detect sdca_cascade interrupt
The SoundWire 1.2 specification defines an "SDCA cascade" bit which
handles a logical OR of all SDCA interrupt sources (up to 30 defined).

Due to limitations of the addressing space, this bit is located in the
SDW_DP0_INT register when DP0 is used, or alternatively in the
DP0_SDCA_Support_INTSTAT register when DP0 is not used.

To allow for both cases to be handled, this bit will be checked in the
main device-level interrupt handling code. This will result in the
register being read twice if DP0 is enabled, but it's not clear how to
optimize this case. It's also more logical to deal with this interrupt
at the device than the port level, this bit is really not DP0 specific
and its location in the DP0_INTSTAT bit is only due to the lack of
free space in SCP_INTSTAT_1.

The SDCA_Cascade bit cannot be masked or cleared, so the interrupt
handling only forwards the detection to the Slave driver, which will
deal with reading the relevant SDCA status bits and clearing them. The
bus driver only signals the detection.

The communication with the Slave driver is based on the same interrupt
callback, with only an extension to provide the status of the
sdca_cascade bit.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20201104152358.9518-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-24 14:09:31 +05:30
Srinivas Kandagatla e6db818a3f soundwire: Fix DEBUG_LOCKS_WARN_ON for uninitialized attribute
running kernel with CONFIG_DEBUG_LOCKS_ALLOC enabled will below warning:

BUG: key ffff502e09807098 has not been registered!
DEBUG_LOCKS_WARN_ON(1)
WARNING: CPU: 5 PID: 129 at kernel/locking/lockdep.c:4623
	lockdep_init_map_waits+0xe8/0x250
Modules linked in:
CPU: 5 PID: 129 Comm: kworker/5:1 Tainted: G
       W         5.10.0-rc1-00277-ged49f224ca3f-dirty #1210
Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
Workqueue: events deferred_probe_work_func
pstate: 80c00005 (Nzcv daif +PAN +UAO -TCO BTYPE=--)
pc : lockdep_init_map_waits+0xe8/0x250
lr : lockdep_init_map_waits+0xe8/0x250
 [ Trimmed ]

Call trace:
 lockdep_init_map_waits+0xe8/0x250
 __kernfs_create_file+0x78/0x180
 sysfs_add_file_mode_ns+0x94/0x1c8
 internal_create_group+0x110/0x3e0
 sysfs_create_group+0x18/0x28
 devm_device_add_group+0x4c/0xb0
 add_all_attributes+0x438/0x490
 sdw_slave_sysfs_dpn_init+0x128/0x138
 sdw_slave_sysfs_init+0x80/0xa0
 sdw_drv_probe+0x94/0x170
 really_probe+0x118/0x3e0
 driver_probe_device+0x5c/0xc0

 [ Trimmed ]

CPU: 5 PID: 129 Comm: kworker/5:1 Tainted: G
     W         5.10.0-rc1-00277-ged49f224ca3f-dirty #1210
Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
Workqueue: events deferred_probe_work_func
Call trace:
 dump_backtrace+0x0/0x1c0
 show_stack+0x18/0x68
 dump_stack+0xd8/0x134
 __warn+0xa0/0x158
 report_bug+0xc8/0x178
 bug_handler+0x20/0x78
 brk_handler+0x70/0xc8

[ Trimmed ]

Fix this by initializing dynamically allocated sysfs attribute to keep lockdep happy!

Fixes: bcac590299 ("soundwire: add Slave sysfs support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201104112941.1134-1-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-24 14:08:51 +05:30
Greg Kroah-Hartman 4cb1a880e7 soundwire updates for 5.10-rc1
This round of update includes:
  - Generic bandwidth allocation algorithm from Intel folks
  - PM support for Intel chipsets
  - Updates to Intel drivers which makes sdw usable on latest laptops
  - Support for MMIO SDW controllers found in QC chipsets
  - Update to subsystem to use helpers in bitfield.h to manage register
    bits
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAl91bukACgkQfBQHDyUj
 g0dllRAAsbAdqrQiWYocxm8WsC4OehwYdgv+WgAcq5820xxKI4XMRhB6TGxeFt3B
 r2fCxoxOqq/z7WCt1Ts6Ivw9dy3E9W8hPgesXIVpqHdyByYLryEllDGuOInkEruO
 Brcqx2E0ySysVyIaw0Nx5UGCwDtPUsH0nfiTXSJrLHv3eQ7SLxtn/S0immfaAMDl
 Y6Z2sa8D77UkOpLxsKBYfcGn+AS7Muc7NS1Sp+TNNZULTC6jL8+HifzqbEcH9GhK
 htBAolCjXmn/FbKCknA+3+zFEe+XKNkG6Y7KApbjViAEGu/fKh8PfghvtMjgAvzk
 xqvoOijxetlovf19Dz9r1/2l4c+O9im6dHOCZCPRQE04/Rcg5J2Oym/c8cZvMjZS
 EpWH34lDcpPgW37IuIUlGqX1crTcfhf4GW931vsJidkM8gAD8DFI90o/ynx+lkca
 SKVS1ZsHnHfP1NkXGikiTxDKtFZzcIJnjJrUFdKRjVgSBKVhRPpbUX3Wd5yOqnmW
 nrKcj6aBkjqy2rpiaV/gqQ65uVobtewqbPF4AIOl2VtwCQZrj5lLERLWz++UWVFB
 DFZhnV912kouPdeI28+UnYTyfVZZGfsmvplJ/dgiNsxixydIqPOl0bA5T+xvDwXc
 jWWTQnvPDL5IoOhmo2NNgvRlWtPmCQpIA1dOUA9b1S/SVvCfnSY=
 =ALTw
 -----END PGP SIGNATURE-----

Merge tag 'soundwire-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next

Vinod writes:

soundwire updates for 5.10-rc1

This round of update includes:
 - Generic bandwidth allocation algorithm from Intel folks
 - PM support for Intel chipsets
 - Updates to Intel drivers which makes sdw usable on latest laptops
 - Support for MMIO SDW controllers found in QC chipsets
 - Update to subsystem to use helpers in bitfield.h to manage register
   bits

* tag 'soundwire-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (66 commits)
  soundwire: sysfs: add slave status and device number before probe
  soundwire: bus: add enumerated Slave device to device list
  soundwire: remove an unnecessary NULL check
  soundwire: cadence: add data port test fail interrupt
  soundwire: intel: enable test modes
  soundwire: enable Data Port test modes
  soundwire: intel: use {u32|u16}p_replace_bits
  soundwire: cadence: use u32p_replace_bits
  soundwire: qcom: get max rows and cols info from compatible
  soundwire: qcom: add support to block packing mode
  soundwire: qcom: clear BIT FIELDs before value set.
  soundwire: Add generic bandwidth allocation algorithm
  soundwire: cadence: add parity error injection through debugfs
  soundwire: bus: export broadcast read/write capability for tests
  ASoC: codecs: realtek-soundwire: ignore initial PARITY errors
  soundwire: bus: use quirk to filter out invalid parity errors
  soundwire: slave: add first_interrupt_done status
  soundwire: bus: filter-out unwanted interrupt reports
  ASoC/soundwire: bus: use property to set interrupt masks
  soundwire: qcom: fix SLIBMUS/SLIMBUS typo
  ...
2020-10-01 22:59:55 +02:00
Pierre-Louis Bossart 0173f525b2 soundwire: sysfs: add slave status and device number before probe
The MIPI DisCo device properties that are read by the driver from
platform firmware, or hard-coded in the driver, should only be
provided as sysfs entries when a driver probes successfully.

However the device status and device number is updated even when there
is no driver present, and hence can be updated when a Slave device is
detected on the bus without being described in platform firmware and
without any driver registered/probed.

As suggested by GregKH, the attribute group for Slave status and
device number is is added by default upon device registration.

Credits to Vinod Koul for the status_show() function, shared in a
separate patch and used as is here. The status table was modified to
remove an unnecessary enum and status_show() is handled in a different
group attribute than what was suggested by Vinod.

Tested-by: Srinivas Kandgatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Co-developed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200924194430.121058-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-28 11:17:43 +05:30
Srinivas Kandagatla fcb9d730be soundwire: bus: add enumerated Slave device to device list
Currently Slave devices are only added on startup, either from Device
Tree or ACPI entries. However Slave devices that are physically
present on the bus, but not described in platform firmware, will never
be added to the device list. The user/integrator can only know the
list of devices by looking a dynamic debug logs.

This patch suggests adding a Slave device even if there is no matching
DT or ACPI entry, so that we can see this in sysfs entry.

Initial code from Srinivas. Comments, fixes for ACPI probe and edits
of commit message by Pierre.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Co-developed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200924194430.121058-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-28 11:17:40 +05:30
Dan Carpenter 5ec3215e56 soundwire: remove an unnecessary NULL check
The "bus" pointer isn't NULL so the address to a non-zero offset in
middle of "bus" cannot be NULL.  Delete the NULL check.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200923083235.GB1454948@mwanda
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-23 15:34:48 +05:30
Pierre-Louis Bossart 9e4e6019e6 soundwire: cadence: add data port test fail interrupt
The Master ports can report errors in test data modes, enable the
interrupt and just log a message. This capability is useful for Master
sink ports only (Master source ports generate data).

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200920193207.31241-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-23 15:29:30 +05:30
Pierre-Louis Bossart 0f9138e757 soundwire: intel: enable test modes
This patch adds debugfs support to override the Master and Slave data
modes. The settings only take effect prior to a new stream being
prepared/enabled, or on resume.

The test mode can be set to verify data integrity and detect bus
clashes, but can only be used to test capture paths. In this case the
input generated by a Slave source port is replaced by a fixed or
cyclical patterns.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200920193207.31241-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-23 15:29:30 +05:30
Pierre-Louis Bossart dd87a72ae9 soundwire: enable Data Port test modes
Test modes are required for all SoundWire IP, and help debug
integration issues. In theory each port can be configured with a
different mode but to simplify this patch only offers separate
configurations for the Master and Slave ports - this covers 99% of the
intended cases during platform integration.

The test mode value is set via platform-specific ways.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200920193207.31241-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-23 15:29:29 +05:30
Vinod Koul f067c92517 soundwire: intel: use {u32|u16}p_replace_bits
FIELD_PREP() does not replace the bits so it is not apt in case where we
modify a register.

Use u32_replace_bits() or u16_replace_bits() instead.

Fixes: 3b4979cabd ("soundwire: intel: use FIELD_{GET|PREP}")
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200917120146.1780323-3-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-18 17:49:44 +05:30
Vinod Koul 714db045cf soundwire: cadence: use u32p_replace_bits
FIELD_PREP() does not replace the bits so it is not apt in case where we
modify a register.

Use u32p_replace_bits() instead.

Fixes: 3cf25d63b1 ("soundwire: cadence: use FIELD_{GET|PREP}")
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200917120146.1780323-2-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-18 17:49:17 +05:30
Srinivas Kandagatla 8cb3b4e74c soundwire: qcom: get max rows and cols info from compatible
currently the max rows and cols values are hardcoded. In reality
these values depend on the IP version. So get these based on
device tree compatible strings.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200917120138.11313-4-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-18 17:48:51 +05:30
Srinivas Kandagatla 5ffba1fb6d soundwire: qcom: add support to block packing mode
This patch adds support to block pack mode, which is required
on Qcom soundwire controllers v1.5.x on few ports!

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200917120138.11313-3-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-18 17:48:51 +05:30
Srinivas Kandagatla 578ddced23 soundwire: qcom: clear BIT FIELDs before value set.
According to usage (bitfields.h) of REG_FIELDS,
Modify is:
  reg &= ~REG_FIELD_C;
  reg |= FIELD_PREP(REG_FIELD_C, c);

Patch ("soundwire: qcom : use FIELD_{GET|PREP}") seems to have
accidentally removed clearing bit field while modifying the register.

Fix this by using u32p_replace_bits() to clear and set the values.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200917120138.11313-2-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-18 17:48:51 +05:30
Bard Liao 9026118f20 soundwire: Add generic bandwidth allocation algorithm
This algorithm computes bus parameters like clock frequency, frame
shape and port transport parameters based on active stream(s) running
on the bus.

Developers can also implement their own .compute_params() callback for
specific resource management algorithm, and set if before calling
sdw_add_bus_master()

Credits: this patch is based on an earlier internal contribution by
Vinod Koul, Sanyog Kale, Shreyas Nc and Hardik Shah. All hard-coded
values were removed from the initial contribution to use BIOS
information instead.

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20200908131520.5712-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-18 17:48:51 +05:30
Pierre-Louis Bossart 32d2a8935b soundwire: cadence: add parity error injection through debugfs
The Cadence IP can inject errors, let's make use of this capability to
test Slave parity error checks.

See e.g. example log where both the master and slave detect the parity
error injected on a dummy read command.

cd /sys/kernel/debug/soundwire/master-1/intel-sdw/
echo 1 > cdns-parity-error-injection

[   44.756249] intel-master sdw-master-1: Parity error
[   44.756313] intel-master sdw-master-1: Msg NACK received
[   44.756366] intel-master sdw-master-1: Msg NACKed for Slave 15
[   44.756375] intel-master sdw-master-1: trf on Slave 15 failed:-5
[   44.756382] intel-master sdw-master-1: parity error injection, read: -5
[   44.756649] rt1308 sdw:1:25d:1308:0: Parity error detected

The code makes sure the Master device is resumed, hence the clock
restarted, before sending a parity error.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200908134521.6781-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-10 11:21:05 +05:30
Pierre-Louis Bossart a350aff45b soundwire: bus: export broadcast read/write capability for tests
Provide prototype and export symbol to enable tests. The bus lock is
handled externally to avoid conflicts e.g. between kernel-generated
traffic and test traffic.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200908134521.6781-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-10 11:21:05 +05:30
Pierre-Louis Bossart 4724f12c13 soundwire: bus: use quirk to filter out invalid parity errors
If a Slave device reports with a quirk that its initial parity check
may be incorrect, filter it but keep the parity checks active in
steady state.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200908134521.6781-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-10 11:21:04 +05:30
Pierre-Louis Bossart c2819e196b soundwire: slave: add first_interrupt_done status
Some Slaves report incorrect information in their interrupt status
registers after a master/bus reset, track the initial interrupt
handling so that quirks can be introduced to filter out incorrect
information while keeping interrupts enabled in steady state.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200908134521.6781-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-10 11:21:04 +05:30
Pierre-Louis Bossart 310f6dc6dc soundwire: bus: filter-out unwanted interrupt reports
Unlike the traditional usage, in the SoundWire specification the
interrupt masks only gate the propagation of an interrupt condition to
the PING frame status. They do not gate the changes of the INT_STAT
registers, which will happen regardless of the mask settings. See
Figure 116 of the SoundWire 1.2 specification for an in-depth
description of the interrupt model.

When the bus driver reads the SCP_INT1_STAT register, it will retrieve
all the interrupt status, including for the mask fields that were not
explicitly set. For example, even if the PARITY mask is not set, the
PARITY error status will be reported if an implementation-defined
interrupt for jack detection is enabled and occurs.

Filtering undesired interrupt reports and handling has to be
implemented in software. This patch enables this filtering for the
INT1_IMPL_DEF, PARITY and BUS_CLASH interrupt sources.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200908134521.6781-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-10 11:21:04 +05:30
Pierre-Louis Bossart 2acd30b9f6 ASoC/soundwire: bus: use property to set interrupt masks
Add a slave-level property and program the SCP_INT1_MASK as desired by
the codec driver. Since there is no DisCo property this has to be an
implementation-specific firmware property or hard-coded in the driver.

The only functionality change is that implementation-defined
interrupts are no longer set for amplifiers - those interrupts are
typically for jack detection or acoustic event detection/hotwording.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200908134521.6781-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-10 11:21:04 +05:30
Jonathan Marek 09309093d5 soundwire: qcom: fix SLIBMUS/SLIMBUS typo
Fix slimbus case being broken thanks to a typo.

Fixes: 5bd773242f ("soundwire: qcom: avoid dependency on CONFIG_SLIMBUS")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200908140818.28373-1-jonathan@marek.ca
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-09 13:27:17 +05:30
Pierre-Louis Bossart d2068da5c8 soundwire: cadence: fix race condition between suspend and Slave device alerts
In system suspend stress cases, the SOF CI reports timeouts. The root
cause is that an alert is generated while the system suspends. The
interrupt handling generates transactions on the bus that will never
be handled because the interrupts are disabled in parallel.

As a result, the transaction never completes and times out on resume.
This error doesn't seem too problematic since it happens in a work
queue, and the system recovers without issues.

Nevertheless, this race condition should not happen. When doing a
system suspend, or when disabling interrupts, we should make sure the
current transaction can complete, and prevent new work from being
queued.

BugLink: https://github.com/thesofproject/linux/issues/2344
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20200817222340.18042-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-09 13:14:42 +05:30
Jonathan Marek 8564551eec soundwire: qcom: add v1.5.1 compatible
Add a compatible string for HW version v1.5.1 on sm8250 SoCs.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200905173905.16541-5-jonathan@marek.ca
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-07 19:47:13 +05:30
Jonathan Marek 82f5c70c26 soundwire: qcom: add support for mmio soundwire master devices
Adds support for qcom soundwire devices with memory mapped IO registers.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200905173905.16541-4-jonathan@marek.ca
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-07 19:47:13 +05:30
Jonathan Marek 5bd773242f soundwire: qcom: avoid dependency on CONFIG_SLIMBUS
The driver may be used without slimbus, so don't depend on slimbus.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200905173905.16541-3-jonathan@marek.ca
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-07 19:47:13 +05:30
Jonathan Marek d1df23fe68 soundwire: qcom: fix abh/ahb typo
The function name qcom_swrm_abh_reg_read should say ahb, fix that.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200905173905.16541-2-jonathan@marek.ca
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-07 19:47:13 +05:30
Pierre-Louis Bossart 244eb888f9 soundwire: intel: remove stream handling from .prepare and .hw_free
Now that the stream is handled at the dai-link level (in the machine
driver), we can remove the stream handling at the dai level. We still
need these callbacks to perform dai-level resource handling
(i.e. addition/removal of a master).

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200903204739.31206-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-04 14:51:12 +05:30
Pierre-Louis Bossart e1c3a7f027 soundwire: intel: remove .trigger operation
Now that the stream trigger is handled at the dai-link level, there is
no need for a dai-level trigger any longer.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200903204739.31206-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-04 14:51:12 +05:30
Pierre-Louis Bossart 06dcb4e443 soundwire: intel: fix NULL/ERR_PTR confusion
snd_soc_dai_get_sdw_stream() can only return the pointer to stream or
an ERR_PTR value, NULL is not a possible value.

Fixes: 09553140c8 ('soundwire: intel: implement get_sdw_stream() operations')
Reported-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200903204739.31206-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-04 14:51:12 +05:30
Pierre-Louis Bossart 3471d2a192 soundwire: stream: fix NULL/IS_ERR confusion
snd_soc_dai_get_sdw_stream() can only return -ENOTSUPP or the stream,
NULL is not a possible value.

Fixes: 4550569bd7 ('soundwire: stream: add helper to startup/shutdown streams')
Reported-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200903204739.31206-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-04 14:51:12 +05:30
Vinod Koul c30f929841 soundwire: intel_init: use FIELD_{GET|PREP}
use FIELD_{GET|PREP} in intel_init driver to get/set field values
instead of open coding masks and shift operations.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200903114504.1202143-9-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-04 14:46:42 +05:30
Vinod Koul 3b4979cabd soundwire: intel: use FIELD_{GET|PREP}
use FIELD_{GET|PREP} in intel driver to get/set field values instead of
open coding masks and shift operations.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200903114504.1202143-8-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-04 14:46:42 +05:30
Vinod Koul 3cf25d63b1 soundwire: cadence: use FIELD_{GET|PREP}
use FIELD_{GET|PREP} in cadence driver to get/set field values instead
of open coding masks and shift operations.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200903114504.1202143-7-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-04 14:46:42 +05:30
Vinod Koul 9972b90ae8 soundwire: qcom : use FIELD_{GET|PREP}
use FIELD_{GET|PREP} in qcom driver to get/set field values instead of
open coding masks and shift operations.
Also, remove now unused register shift defines

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200903114504.1202143-6-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-04 14:46:42 +05:30
Vinod Koul 41ff91741c soundwire: stream: use FIELD_{GET|PREP}
use FIELD_{GET|PREP} in stream code to get/set field values instead of
open coding masks and shift operations.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200903114504.1202143-5-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-04 14:46:42 +05:30
Vinod Koul bd6a024f21 soundwire: slave: use SDW_DISCO_LINK_ID()
use SDW_DISCO_LINK_ID() in slave code to extract field values instead of
open coding masks and shift operations to extract link_id

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200903114504.1202143-4-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-04 14:46:42 +05:30
Vinod Koul d5826a4bdb soundwire: bus: use FIELD_GET()
use FIELD_GET() in bus code to extract field values instead of open
coding masks and shift operations.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200903114504.1202143-3-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-04 14:46:41 +05:30
Pierre-Louis Bossart 5ee74eb280 soundwire: intel: don't manage link power individually
Each link has separate power controls, but experimental results show
we need to use an all-or-none approach to the link power management.

This change has marginal power impacts, the DSP needs to be powered
anyways before SoundWire links can be powered, and even when powered a
link can be in clock-stopped mode.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200901150556.19432-11-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-03 16:14:39 +05:30
Pierre-Louis Bossart de763fa888 soundwire: intel: pass link_mask information to each master
While the hardware exposes independent bits to power-up each master,
the recommended sequence is to power all links or none. Idle links can
still use the clock stop mode while the master is powered.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200901150556.19432-10-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-03 16:14:39 +05:30
Pierre-Louis Bossart f748f34ef9 soundwire: intel: add error log for clock-stop invalid configs
Detect cases where the clock is assumed to be stopped but the IP is
not in the relevant state. There is no real way to recover here, but
adding an error log can help detect bad programming sequences or race
conditions.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200901150556.19432-9-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-03 16:14:39 +05:30
Pierre-Louis Bossart 063ff4e568 soundwire: stream: enable hw_sync as needed by hardware
Use platform-specific information to decide when to use hw_sync, not
only a number of links > 1.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200901150556.19432-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-03 16:14:39 +05:30
Pierre-Louis Bossart 94eed66107 soundwire: intel: add multi-link hw_synchronization information
set the flags as required by hardware implementation

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200901150556.19432-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-03 16:14:39 +05:30
Pierre-Louis Bossart d78071b4e1 soundwire: intel: add missing support for all clock stop modes
Deal with the BUS_RESET case, which is the default. The only change is
to add support for the exit sequence using the syncArm/syncGo mode for
the exit reset sequence.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200901150556.19432-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-03 16:14:39 +05:30
Pierre-Louis Bossart 857a7c429e soundwire: intel: add multi-link support
The multi-link support is enabled with a hardware gsync signal
connecting all links. All commands and operations which typically are
handled on an SSP boundary will be deferred further and enabled across
all links with the 'syncGo' sequence.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200901150556.19432-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-03 16:14:39 +05:30
Pierre-Louis Bossart 0ef2986e19 soundwire: intel: ignore software command retries
with multiple links synchronized in hardware, retrying commands in
software is not recommended.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200901150556.19432-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-03 16:14:38 +05:30
Pierre-Louis Bossart e4be9facb9 soundwire: intel: disable shim wake on suspend
If we enabled the clock stop mode and suspend, we need to disable the
shim wake. We do so only if the parent is pm_runtime active due to
power rail dependencies.

GitHub issue: https://github.com/thesofproject/linux/issues/1678
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200901150556.19432-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-03 16:14:38 +05:30
Pierre-Louis Bossart 6073755886 soundwire: fix port_ready[] dynamic allocation in mipi_disco
The existing code allocates memory for the total number of ports.
This only works if the ports are contiguous, but will break if e.g. a
Devices uses port0, 1, and 14. The port_ready[] array would contain 3
elements, which would lead to an out-of-bounds access. Conversely in
other cases, the wrong port index would be used leading to timeouts on
prepare.

This can be fixed by allocating for the worst-case of 15
ports (DP0..DP14). In addition since the number is now fixed, we can
use an array instead of a dynamic allocation.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200831134318.11443-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-03 16:02:29 +05:30
Tom Rix 3fbbf2148a soundwire: fix double free of dangling pointer
clang static analysis flags this problem

stream.c:844:9: warning: Use of memory after
  it is freed
        kfree(bus->defer_msg.msg->buf);
              ^~~~~~~~~~~~~~~~~~~~~~~

This happens in an error handler cleaning up memory
allocated for elements in a list.

	list_for_each_entry(m_rt, &stream->master_list, stream_node) {
		bus = m_rt->bus;

		kfree(bus->defer_msg.msg->buf);
		kfree(bus->defer_msg.msg);
	}

And is triggered when the call to sdw_bank_switch() fails.
There are a two problems.

First, when sdw_bank_switch() fails, though it frees memory it
does not clear bus's reference 'defer_msg.msg' to that memory.

The second problem is the freeing msg->buf. In some cases
msg will be NULL so this will dereference a null pointer.
Need to check before freeing.

Fixes: 99b8a5d608 ("soundwire: Add bank switch routine")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200902202650.14189-1-trix@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-03 14:10:19 +05:30
Bard Liao f046b23340 soundwire: intel: fix intel_suspend/resume defined but not used warning
When CONFIG_PM_SLEEP is not defined, GCC throws compilation warnings:

drivers/soundwire/intel.c:1799:12: warning: ‘intel_resume’ defined but not
used [-Wunused-function]
 static int intel_resume(struct device *dev)
            ^~~~~~~~~~~~
drivers/soundwire/intel.c:1683:12: warning: ‘intel_suspend’ defined but not
used [-Wunused-function]
 static int intel_suspend(struct device *dev)
            ^~~~~~~~~~~~~

Fix by using __maybe_unused macro.

Suggested-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200824133234.28115-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-26 14:16:22 +05:30
Pierre-Louis Bossart f8d0168e03 soundwire: bus: fix typo in comment on INTSTAT registers
s/Instat/Intstat/

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200817220933.17492-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-19 14:39:05 +05:30
Rander Wang 08abad9f45 soundwire: intel: refine runtime pm for SDW_INTEL_CLK_STOP_BUS_RESET
When all the links are suspended, the HDaudio controller may suspend
and the power rails to the SoundWire IP may be disabled, requiring a
complete re-initialization/enumeration on resume. However, if one or
more Masters remained active, the HDaudio controller will remain active
and the power rails will remain enabled. As a result, during the link
resume step we can check if the context was preserved by verifying if
the clock was stopped, and avoid doing a complete bus reset and
re-enumeration.

Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200817152923.3259-13-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-18 12:01:05 +05:30
Pierre-Louis Bossart 61fb830bf9 soundwire: intel: support clock_stop mode without quirks
In this mode, on restart the bus restarts immediately, the Slaves
remain synchronized and all context is kept intact.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200817152923.3259-12-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-18 12:01:05 +05:30
Pierre-Louis Bossart ab996b2971 soundwire: intel_init: handle power rail dependencies for clock stop mode
When none of the clock stop quirks is specified, the Master IP will
assume the context is preserved and will not reset the Bus and restart
enumeration. Due to power rail dependencies, the HDaudio controller
needs to remain powered and prevented from executing its pm_runtime
suspend routine.

This choice of course has a power impact, and this mode should only be
selected when latency requirements are critical or the parent device
can enter D0ix modes.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200817152923.3259-11-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-18 12:01:05 +05:30
Pierre-Louis Bossart caf688192b soundwire: intel: add CLK_STOP_NOT_ALLOWED support
In case the clock needs to keep running, we need to prevent the Master
from entering pm_runtime suspend.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200817152923.3259-10-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-18 12:01:05 +05:30
Rander Wang 6626a616aa soundwire: intel: add CLK_STOP_BUS_RESET support
Move existing pm_runtime suspend under the CLK_STOP_TEARDOWN case.

In this mode the Master IP will lose all context but in-band wakes are
supported.

On pm_runtime resume a complete re-enumeration will be performed after
a bus reset.

Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200817152923.3259-9-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-18 12:01:05 +05:30
Pierre-Louis Bossart a320f41eac soundwire: intel: add CLK_STOP_TEARDOWN for pm_runtime suspend
Now that we have options, add support for TEARDOWN mode (same
functionality as existing code)

All other modes will be added in follow-up patches.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200817152923.3259-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-18 12:01:05 +05:30
Pierre-Louis Bossart a2d9c161db soundwire: intel: pm_runtime idle scheduling
Add quirk and pm_runtime idle scheduling to let the Master suspend if
no Slaves become attached. This can happen when a link is not marked
as disabled and has devices exposed in the DSDT, if the power is
controlled by sideband means or the link includes a pluggable
connector.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200817152923.3259-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-18 12:01:05 +05:30
Bard Liao a5a0239c27 soundwire: intel: reinitialize IP+DSP in .prepare(), but only when resuming
The .prepare() callback is invoked for normal streaming, underflows or
during the system resume transition. In the latter case, the context
for the ALH PDIs is lost, and the DSP is not initialized properly
either, but the bus parameters don't need to be recomputed.

Conversely, when doing a regular .prepare() during an underflow, the
ALH/SHIM registers shall not be changed as the hardware cannot be
reprogrammed after the DMA started (hardware spec requirement).

This patch adds storage of PDI and hw_params in the DAI dma context,
and the difference between the types of .prepare() usages is handled
via a simple boolean, updated when suspending, and tested for in the
.prepare() case.

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200817152923.3259-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-18 12:01:05 +05:30
Pierre-Louis Bossart 99b6a30f9f soundwire: intel: call helper to reset Slave states on resume
This helps make sure they are all UNATTACHED and reset the state
machines.

At the moment we perform a bus reset both for system resume and
pm_runtime resume, this will be modified when clock-stop mode is
supported

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200817152923.3259-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-18 12:01:04 +05:30
Pierre-Louis Bossart cb1e6d59e8 soundwire: intel: fix race condition on system resume
Previous patches took care of the case where the master device is
pm_runtime 'suspended' when a system suspend occurs.

In the case where the master device was not suspended, e.g. if suspend
occurred while streaming audio, Intel validation noticed a race
condition: the pm_runtime suspend may conflict with the enumeration
started by the system resume.

This can be simply fixed by updating the status before exiting system
resume.

GitHub issue: https://github.com/thesofproject/linux/issues/1482
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200817152923.3259-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-18 12:01:04 +05:30
Pierre-Louis Bossart b61b8b3788 soundwire: intel: reset pm_runtime status during system resume
The system resume does the entire bus re-initialization and brings it
to full-power. If the device was pm_runtime suspended, there is no
need to run the pm_runtime resume sequence after the system runtime.

Follow the documentation from runtime_pm.rst, and conditionally
disable, set_active and re-enable the device on system resume.

Note that pm_runtime_suspended() is used instead of
pm_runtime_status_suspended() so that we can deal with the case where
pm_runtime is disabled.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200817152923.3259-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-18 12:01:04 +05:30
Pierre-Louis Bossart ebf878eddb soundwire: intel: add pm_runtime support
Add basic hooks in DAI .startup and .shutdown callbacks.

The SoundWire IP should be powered between those two calls. The power
dependencies between SoundWire and DSP are handled with the
parent/child relationship, before the SoundWire master device becomes
active the parent device will become active and power-up the shared
rails.

For now the strategy is to rely on complete enumeration when the
device becomes active, so the code is a copy/paste of the sequence for
system suspend/resume. In future patches, the strategy will optionally
be to rely on clock stop if the enumeration time is prohibitive or
when the devices connected to a link can signal a wake.

A module parameter is added to make integration of new Slave devices
easier, to e.g. keep the device active or prevent clock-stop.

Note that we need to we have to disable runtime pm before device
unregister, otherwise we will see "Failed to power up link: -11" error
on module remove test.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200817152923.3259-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-18 12:01:04 +05:30
Pierre-Louis Bossart 9b3b4b3f2f soundwire: intel: Add basic power management support
Implement suspend/resume capabilities (not runtime_pm for now)
The resume part is essentially a full-blown re-enumeration.

When S0ix is supported, we will select clock stop mode when the ACPI
target state is S0, and tear down the link for S3.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200721203723.18305-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-17 17:31:18 +05:30
Bard Liao bd84256e86 soundwire: master: enable pm runtime
The hierarchy of soundwire devices is platform device -> M device -> S
device. A S device is physically attached on the platform device. So the
platform device should be resumed when a S device is resumed. As the
bridge of platform device and S device, we have to implement runtime pm
on M driver. We have set runtime pm ops in M driver already, but still
need to enable runtime pm.

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>

Link: https://lore.kernel.org/r/20200726215945.3119-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-17 12:04:48 +05:30
Greg Kroah-Hartman 575ec5e5e9 soundwire updates for 5.9-rc1
This contains few core changes and bunch of Intel driver updates:
 
  - Adds definitions for 1.2 spec
  - Sanyog left as a MAINTAINER and Bard took his place while Sanyog
    is a reviewer now.
  - Intel: Lots of updates to stream/dai handling, wake support and link
    synchronization.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAl8ZNqYACgkQfBQHDyUj
 g0dFOA//aqGKs+mqCCCPmWNU8H6RgF7Ml2v9z5oRsamV/lR+sSq+0YzMpa1mpWmh
 XQswZ0j4x6CRCKDqmLKYM7pOhxGFJ6RLbtYNL+EvWyJx2/O/vcaTlYAnguAtQzim
 Sz1V3Rm07Xua9iOFOK3YpHaFrhG1oZZZmYeefgdx21BYOJm20ohp3CFlGDxvPhJO
 pgwkGGZOxbNt8C9JVbBB6S8Vu9zOU2o2re0CL7ZRA4+Rf+jkYhtZKkYP7e5BfcCU
 6MKwFyB0GvnNkEUCe1/6l3pJ98E1gbBFvLAKRHPSu3U9ib0/jtn7Z7XEl7lOwNcC
 aeNBSvewK74B6Ow8VcHerFnd1q/6AfYEJ2ev7w2WAciVK4YlBI05CxdkJUkkmce0
 1lLp6GyrnP73+QAvtj5ybdHGnVViEwFHDhfmc+bx5UnTiE6YZdqhz+gsxCFYD7ob
 ah0D5ZZl8cVB4qXjsqQhCLUcVZDfj05LUecd7ZdIWTbOGuQmeHdMkdXbGVECE2RY
 wdwQNt1uXeeWf0Olitp7e1O0iAWP2xY4xJW8Ec44w7qmY+Hdpi76ZST2KR8995dS
 lbqodCKOzNrE7jKf8xa3xRj/i1zysdAIMbWHDylef5Iu4puWlBshdjhS3Uc5IX9C
 drdmBuHjuYYFBQeK7cYgAdNZscTxtKtQXRkYXnL+WfHMQUZRjL8=
 =De+P
 -----END PGP SIGNATURE-----

Merge tag 'soundwire-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next

Vinod writes:

soundwire updates for 5.9-rc1

This contains few core changes and bunch of Intel driver updates:

 - Adds definitions for 1.2 spec
 - Sanyog left as a MAINTAINER and Bard took his place while Sanyog
   is a reviewer now.
 - Intel: Lots of updates to stream/dai handling, wake support and link
   synchronization.

* tag 'soundwire-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (31 commits)
  Soundwire: intel_init: save Slave(s) _ADR info in sdw_intel_ctx
  soundwire: intel: add wake interrupt support
  soundwire: intel/cadence: merge Soundwire interrupt handlers/threads
  soundwire: intel_init: use EXPORT_SYMBOL_NS
  soundwire: intel_init: add implementation of sdw_intel_enable_irq()
  soundwire: intel: introduce helper for link synchronization
  soundwire: intel: introduce a helper to arm link synchronization
  soundwire: intel: revisit SHIM programming sequences.
  soundwire: intel: reuse code for wait loops to set/clear bits
  soundwire: fix the kernel-doc comment
  soundwire: sdw.h: fix indentation
  soundwire: sdw.h: fix PRBS/Static_1 swapped definitions
  soundwire: intel: don't free dma_data in DAI shutdown
  soundwire: cadence: allocate/free dma_data in set_sdw_stream
  soundwire: intel: remove stream allocation/free
  soundwire: stream: add helper to startup/shutdown streams
  soundwire: intel: implement get_sdw_stream() operations
  MAINTAINERS: change SoundWire maintainer
  soundwire: bus: initialize bus clock base and scale registers
  soundwire: extend SDW_SLAVE_ENTRY
  ...
2020-07-23 09:12:15 +02:00
Bard Liao a81844034e Soundwire: intel_init: save Slave(s) _ADR info in sdw_intel_ctx
Save ACPI information in context so that we can match machine driver
with sdw _ADR matching tables.

Suggested-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200716150947.22119-10-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-21 16:05:41 +05:30
Rander Wang ab2c913297 soundwire: intel: add wake interrupt support
When system is suspended in clock stop mode on intel platforms, both
master and slave are in clock stop mode and soundwire bus is taken
over by a glue hardware. The bus message for jack event is processed
by this glue hardware, which will trigger an interrupt to resume audio
pci device. Then audio pci driver will resume soundwire master and slave,
transfer bus ownership to master, finally slave will report jack event
to master and codec driver is triggered to check jack status.

if a slave has been attached to a bus, the slave->dev_num_sticky
should be non-zero, so we can check this value to skip the
ghost devices defined in ACPI table but not populated in hardware.

Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200716150947.22119-9-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-21 16:05:41 +05:30
Bard Liao 4a98a6b2fa soundwire: intel/cadence: merge Soundwire interrupt handlers/threads
The existing code uses one pair of interrupt handler/thread per link
but at the hardware level the interrupt is shared. This works fine for
legacy PCI interrupts, but leads to timeouts in MSI (Message-Signaled
Interrupt) mode, likely due to edges being lost.

This patch unifies interrupt handling for all links. The dedicated
handler is removed since we use a common one for all shared interrupt
sources, and the thread function takes care of dealing with interrupt
sources. This partition follows the model used for the SOF IPC on
HDaudio platforms, where similar timeout issues were noticed and doing
all the interrupt handling/clearing in the thread improved
reliability/stability.

Validation results with 4 links active in parallel show a night-and-day
improvement with no timeouts noticed even during stress tests. Latency
and quality of service are not affected by the change - mostly because
events on a SoundWire link are throttled by the bus frame rate
(typically 8..48kHz).

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200716150947.22119-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-21 16:05:41 +05:30
Pierre-Louis Bossart 8459cea755 soundwire: intel_init: use EXPORT_SYMBOL_NS
Make sure all symbols in this soundwire-intel-init module are exported
with a namespace.

The MODULE_IMPORT_NS will be used in Intel/SOF HDaudio modules to be
posted in a separate series.

Namespaces are only introduced for the Intel parts of the SoundWire
code at this time, in future patches we should also add namespaces for
Cadence parts and the SoundWire core.

Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200716150947.22119-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-21 16:05:40 +05:30
Pierre-Louis Bossart 12b161468d soundwire: intel_init: add implementation of sdw_intel_enable_irq()
This function is required to enable all interrupts across all links.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200716150947.22119-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-21 16:05:40 +05:30
Pierre-Louis Bossart 437e3289b5 soundwire: intel: introduce helper for link synchronization
After arming the synchronization, the SYNCGO field controls the
hardware-based synchronization between links.

Move the programming and wait for clear of SYNCGO to dedicated helper.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200716150947.22119-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-21 16:05:40 +05:30
Pierre-Louis Bossart 02629e4548 soundwire: intel: introduce a helper to arm link synchronization
Move code from pre_bank_switch to dedicated helper, will be used in
follow-up patches as recommended by programming flows.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200716150947.22119-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-21 16:05:40 +05:30
Pierre-Louis Bossart 4a17c441c7 soundwire: intel: revisit SHIM programming sequences.
Somehow the existing code is not aligned with the steps described in
the documentation, refactor code and make sure the register
programming sequences are correct. Also add missing power-up,
power-down and wake capabilities (the last two are used in follow-up
patches but introduced here for consistency).

Some of the SHIM registers exposed fields that are link specific, and
in addition some of the power-related registers (SPA/CPA) take time to
be updated. Uncontrolled access leads to timeouts or errors. Add a
mutex, shared by all links, so that all accesses to such registers are
serialized, and follow a pattern of read-modify-write.

This includes making sure SHIM_SYNC is programmed only once, before
the first master is powered on. We use a 'shim_mask' field, shared
between all links and protected by a mutex, to deal with power-up and
power-down sequences.

Note that the SYNCPRD value is tied only to the XTAL value and not the
current bus frequency or the frame rate.

BugLink: https://github.com/thesofproject/linux/issues/1555
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200716150947.22119-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-21 16:05:40 +05:30
Pierre-Louis Bossart 7d2845d58d soundwire: intel: reuse code for wait loops to set/clear bits
Refactor code and use same routines on set/clear

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200716150947.22119-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-21 16:05:40 +05:30
Vinod Koul 3b71c69024 soundwire: fix the kernel-doc comment
sdw_startup_stream() and sdw_shutdown_stream() argument has been updated
but not the comments, so update these as well to fix warning with W=1

drivers/soundwire/stream.c:1859: warning: Function parameter or member 'sdw_substream' not described in 'sdw_startup_stream'
drivers/soundwire/stream.c:1859: warning: Excess function parameter 'stream' description in 'sdw_startup_stream'
drivers/soundwire/stream.c:1903: warning: Function parameter or member 'sdw_substream' not described in 'sdw_shutdown_stream'
drivers/soundwire/stream.c:1903: warning: Excess function parameter 'stream' description in 'sdw_shutdown_stream'

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200715095702.1519554-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-16 09:37:43 +05:30
Pierre-Louis Bossart 9cb834b17c soundwire: intel: don't free dma_data in DAI shutdown
Now that the DMA data is allocated/freed in set_sdw_stream(), remove
free operations.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200630184356.24939-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-15 10:10:05 +05:30
Pierre-Louis Bossart b5e9e687d6 soundwire: cadence: allocate/free dma_data in set_sdw_stream
The current memory allocation is somewhat strange: the dma_data is
allocated in set_sdw_stream, but released in the intel DAI
shutdown. This no longer works with the multi-cpu implementation,
since the dma_data is released in the dai shutdown which takes place
before the dailink shutdown.

Move to a more symmetric allocation where the dma_data is allocated
with non-NULL SoundWire stream, and conversely released when a NULL
stream is provided - for consistency with the stream startup and
shutdown operations.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200630184356.24939-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-15 10:10:05 +05:30
Pierre-Louis Bossart ff16d1e584 soundwire: intel: remove stream allocation/free
To support streaming across multiple links, the stream allocation/free
needs to be at the dailink level, not the dai.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200630184356.24939-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-15 10:10:05 +05:30
Pierre-Louis Bossart 4550569bd7 soundwire: stream: add helper to startup/shutdown streams
To handle streams at the dailink level, expose two helpers that will
be called from machine drivers.

Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200630184356.24939-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-15 10:10:05 +05:30
Pierre-Louis Bossart 09553140c8 soundwire: intel: implement get_sdw_stream() operations
This is needed to retrieve the information when the stream is
allocated at the dai_link level.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200630184356.24939-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-15 10:09:35 +05:30
Pierre-Louis Bossart 29d158f906 soundwire: bus: initialize bus clock base and scale registers
The SoundWire 1.2 specification adds new registers to allow for
seamless clock changes while audio transfers are on-going. Program
them following the specification.

Note that dynamic clock changes are not supported for now, this only
adds the register initialization.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200608205436.2402-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-30 21:26:17 +05:30
Pierre-Louis Bossart b5924268d6 soundwire: extend SDW_SLAVE_ENTRY
The SoundWire 1.2 specification adds new capabilities that were not
present in previous version, such as the class ID.

To enable support for class drivers, and well as drivers that address
a specific version, all fields of the sdw_device_id structure need to
be exposed. For SoundWire 1.0 and 1.1 devices, a wildcard is used so
class and version information are ignored.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200608205436.2402-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-30 21:26:17 +05:30
Pierre-Louis Bossart ee9173db50 soundwire: bus_type: convert open-coded while() to for() loop
No functionality change, just more structured code.

Suggested-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200608205436.2402-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-30 21:26:17 +05:30
Rikard Falkeborn 51fe3881a2 soundwire: qcom: Constify static structs
qcom_swrm_port_ops and qcom_swrm_ops are not modified and can be made
const to allow the compiler to put them in read-only memory.

Before:
   text    data     bss     dec     hex filename
  18266    3056     256   21578    544a drivers/soundwire/qcom.o

After:
   text    data     bss     dec     hex filename
  18426    2896     256   21578    544a drivers/soundwire/qcom.o

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20200609230029.69802-1-rikard.falkeborn@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-22 17:28:10 +05:30
Pierre-Louis Bossart 6d2c66695b soundwire: intel: transition to 3 steps initialization
Rather than a plain-vanilla init/exit, this patch provides 3 steps in
the initialization needed for driver selection, machine driver
selection and deal with power rail dependencies.

- ACPI scan: this step is done at a very early stage to detect the
presence of a SoundWire Controller and enabled links at the BIOS
level. This step may be called from the legacy HDaudio driver, which
will abort its probe to let the Sound Open Firmware (SOF) handle the
hardware.

- probe: this step allocates all the required memory and will add a
sdw_bus, which in turn will result in identifying all possible Slaves
listed below the Controller ACPI companion device. All the information
is reported to the parent PCI driver which will select the relevant
machine driver.

- startup: this last step starts the bus reset, which results in Slave
devices reporting as ATTACHED and being enumerated. This step is only
done during the card creation stage, after the DSP is powered to
account for internal power rail dependencies.

These 3 steps are already supported in the Sound Open firmware
drivers and upstream.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200531182102.27840-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-22 17:21:36 +05:30
Pierre-Louis Bossart 4ab34412fc soundwire: intel_init: pass link information as platform data
It's not clear how this code ever worked, the link information is used
in intel.c but never passed as platform_data.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200531182102.27840-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-22 17:21:36 +05:30
Pierre-Louis Bossart dd906cc615 soundwire: intel_init: use devm_ allocation
Make error handling simpler with devm_ allocation.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200531182102.27840-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-22 17:21:36 +05:30
Pierre-Louis Bossart 9cd1c5a721 soundwire: intel_init: remove useless test
No need to test link_mask twice

Suggested-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200531182102.27840-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-22 17:21:36 +05:30
Pierre-Louis Bossart 83e129afbe soundwire: intel: clarify drvdata and remove more indirections
The use of drvdata mixes two structures. There was no harm the first
structure is embedded as the first element of the second, but that's
not good. Make sure all drvdata is based on the 'sdw_cdns' structure.

While we are at it, remove indirections for 'dev' and 'cdns' to make
the code more readable.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200531182102.27840-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-22 17:21:36 +05:30
Pierre-Louis Bossart b6109dd6dc soundwire: intel: cleanups for indirections/logs
The code can be simplified a bit to have a more consistent use of
'dev' and 'bus', as well as move definitions around. This will help
make the major changes in follow-up patches easier to review.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200531182102.27840-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-22 17:21:36 +05:30
Pierre-Louis Bossart bf6d6e68d2 soundwire: intel: fix memory leak with devm_kasprintf
The dais are allocated with devm_kcalloc() but their name isn't
resourced managed and never freed. Fix by also using devm_ for the dai
names as well.

Fixes: c46302ec55 ('soundwire: intel: Add audio DAI ops')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200617163536.17401-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-22 17:15:20 +05:30
Bard Liao 929cfee314 soundwire: bus: clock_stop: don't deal with UNATTACHED Slave devices
We don't need to do anything for the slave if it is unattached during
clock stop prepare and exit sequences.

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200531151806.25951-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-22 17:07:32 +05:30
Vinod Koul 908442aa67 soundwire: Replace 'objs' by 'y'
`-objs` is designed for building host programs, change to `-y`,
more straightforward for device drivers.

See Documentation/kbuild/makefiles.rst

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200616162140.2563535-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-22 17:06:08 +05:30
Rander Wang fcbcf1f7b5 soundwire: intel: use a single module
It's not clear why we have two modules for the Intel controller/master
support when there is a single Kconfig. This adds complexity for no
good reason, the two parts need to work together anyways.

Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200519191903.6557-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-20 19:24:55 +05:30
Vinod Koul 84091304a4 soundwire: fix spelling mistake
Fix typo for paranoia spelled as paranioa

Fixes: bcac590299 ("soundwire: add Slave sysfs support")
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-20 17:29:37 +05:30
Vinod Koul 7541765df1 soundwire: fix trailing line in sysfs_slave.c
Commit bcac590299 ("soundwire: add Slave sysfs support") added
trailing line in file sysfs_slave.c, so remove it

Fixes: bcac590299 ("soundwire: add Slave sysfs support")
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-20 17:27:45 +05:30
Pierre-Louis Bossart bcac590299 soundwire: add Slave sysfs support
Expose MIPI DisCo Slave properties in sysfs.

For Slave properties and Data Port 0, the attributes are managed with
simple devm_ support.

A Slave Device may have more than one Data Port (DPN), and each Data
Port can be sink or source. The attributes are created dynamically
using pre-canned macros, but still use devm_ with a name attribute
group to avoid creating kobjects - as requested by GregKH. In the
_show function, we use container_of() to retrieve port number and
direction required to extract the information.

Audio modes are not supported for now. Depending on the discussions
the SoundWire Device Class, we may add it later as is or follow the
new specification.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200518203551.2053-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-20 17:22:41 +05:30
Pierre-Louis Bossart c5778ca49a soundwire: master: add sysfs support
Add the master properties as attributes. The description is directly
derived from the MIPI DisCo specification.

Credits: this patch is based on an earlier internal contribution by
Vinod Koul, Sanyog Kale, Shreyas Nc and Hardik Shah.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200518203551.2053-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-20 17:22:36 +05:30
Pierre-Louis Bossart 6bf393c577 soundwire: disco: s/ch/channels/
Use more meaningful member names in preparation for sysfs support.
No functionality change.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200518203551.2053-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-20 17:22:30 +05:30
Bard Liao 26d970225d soundwire: master: add runtime pm support
We need to enable runtime_pm on master device with generic helpers,
so that a Slave-initiated wake is propagated to the bus parent.

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20200518174322.31561-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-19 12:44:35 +05:30
Pierre-Louis Bossart 7ceaa40b93 soundwire: bus_type: add sdw_master_device support
In the existing SoundWire code, Master Devices are not explicitly
represented - only SoundWire Slave Devices are exposed (the use of
capital letters follows the SoundWire specification conventions).

With the existing code, the bus is handled without using a proper device,
and bus->dev typically points to a platform device. The right thing to
do as discussed in multiple reviews is use a device for each bus.

The sdw_master_device addition is done with minimal internal plumbing
and not exposed externally. The existing API based on
sdw_bus_master_add() and sdw_bus_master_delete() will deal with the
sdw_master_device life cycle, which minimizes changes to existing
drivers.

Note that the Intel code will be modified in follow-up patches (no
impact on any platform since the connection with ASoC is not supported
upstream so far).

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20200518174322.31561-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-19 12:44:35 +05:30
Bard Liao dbb50c7a99 soundwire: bus: add unique bus id
Adding an unique id for each bus.

Suggested-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20200518174322.31561-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-19 12:44:34 +05:30
Pierre-Louis Bossart 90acca1d54 soundwire: bus_type: introduce sdw_slave_type and sdw_master_type
this is a preparatory patch before the introduction of the
sdw_master_type. The SoundWire slave support is slightly modified with
the use of a sdw_slave_type, and the uevent handling move to
slave.c (since it's not necessary for the master).

No functionality change other than moving code around.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20200518174322.31561-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-19 12:44:34 +05:30
Pierre-Louis Bossart 5cab3ff248 soundwire: bus: rename sdw_bus_master_add/delete, add arguments
In preparation for future extensions, rename functions to use
sdw_bus_master prefix and add a parent and fwnode argument to
sdw_bus_master_add to help with device registration in follow-up
patches.

No functionality change, just renames and additional arguments.

The Intel code is currently unused, the two additional arguments are
only needed for compilation.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20200518174322.31561-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-19 12:44:34 +05:30
Guennadi Liakhovetski 6f7219fecf soundwire: intel: (cosmetic) remove multiple superfluous "else" statements
No need for an "else" after a "return" statement. Remove multiple such
occurrences in Intel-specific code.

Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200508003046.23162-3-guennadi.liakhovetski@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-11 11:42:39 +05:30
Guennadi Liakhovetski f779ad0910 soundwire: (cosmetic) remove multiple superfluous "else" statements
No need for an "else" after a "return" statement. Remove multiple such
occurrences in bus.c.

Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200508003046.23162-2-guennadi.liakhovetski@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-11 11:42:39 +05:30
Samuel Zou 4f1738f4c2 soundwire: qcom: Use IRQF_ONESHOT
Fixes coccicheck error:

drivers/soundwire/qcom.c:815:7-32: ERROR: Threaded IRQ with
no primary handler requested without IRQF_ONESHOT

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Samuel Zou <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1588735553-34219-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-11 11:39:54 +05:30
Pierre-Louis Bossart f48f4fd9fe soundwire: bus: reduce verbosity on enumeration
No need to repeat the same info log on all enumerations (essentially
each power-up), keep it as debug information.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200419185117.4233-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-05 08:51:44 +05:30
Pierre-Louis Bossart 88ac86f252 soundwire: debugfs: clarify SDPX license with GPL-2.0-only
Follow recommendation to use GPL-2.0-only

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200419185117.4233-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-05 08:51:44 +05:30
Pierre-Louis Bossart 8893ab5e8e soundwire: slave: don't init debugfs on device registration error
The error handling flow seems incorrect, there is no reason to try and
add debugfs support if the device registration did not
succeed. Return on error.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200419185117.4233-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-05 08:51:44 +05:30
Pierre-Louis Bossart 91b5cfc020 soundwire: qcom: fix error handling in probe
Make sure all error cases are properly handled and all resources freed.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200429185057.12810-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-05 08:51:44 +05:30
Kuninori Morimoto 611905d6e3 soundwire: intel: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer
Now ALSA SoC needs to use asoc_rtd_to_codec(),
otherwise, it will be compile error.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y2qqvdxu.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-04-20 12:38:04 +05:30
Linus Torvalds 0ad5b053d4 Char/Misc driver patches for 5.7-rc1
Here is the big set of char/misc/other driver patches for 5.7-rc1.
 
 Lots of things in here, and it's later than expected due to some reverts
 to resolve some reported issues.  All is now clean with no reported
 problems in linux-next.
 
 Included in here is:
 	- interconnect updates
 	- mei driver updates
 	- uio updates
 	- nvmem driver updates
 	- soundwire updates
 	- binderfs updates
 	- coresight updates
 	- habanalabs updates
 	- mhi new bus type and core
 	- extcon driver updates
 	- some Kconfig cleanups
 	- other small misc driver cleanups and updates
 
 As mentioned, all have been in linux-next for a while, and with the last
 two reverts, all is calm and good.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXodfvA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynzCQCfROhar3E8EhYEqSOP6xq6uhX9uegAnRgGY2rs
 rN4JJpOcTddvZcVlD+vo
 =ocWk
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big set of char/misc/other driver patches for 5.7-rc1.

  Lots of things in here, and it's later than expected due to some
  reverts to resolve some reported issues. All is now clean with no
  reported problems in linux-next.

  Included in here is:
   - interconnect updates
   - mei driver updates
   - uio updates
   - nvmem driver updates
   - soundwire updates
   - binderfs updates
   - coresight updates
   - habanalabs updates
   - mhi new bus type and core
   - extcon driver updates
   - some Kconfig cleanups
   - other small misc driver cleanups and updates

  As mentioned, all have been in linux-next for a while, and with the
  last two reverts, all is calm and good"

* tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits)
  Revert "driver core: platform: Initialize dma_parms for platform devices"
  Revert "amba: Initialize dma_parms for amba devices"
  amba: Initialize dma_parms for amba devices
  driver core: platform: Initialize dma_parms for platform devices
  bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device()
  bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture
  bus: mhi: core: Add support for reading MHI info from device
  misc: rtsx: set correct pcr_ops for rts522A
  speakup: misc: Use dynamic minor numbers for speakup devices
  mei: me: add cedar fork device ids
  coresight: do not use the BIT() macro in the UAPI header
  Documentation: provide IBM contacts for embargoed hardware
  nvmem: core: remove nvmem_sysfs_get_groups()
  nvmem: core: use is_bin_visible for permissions
  nvmem: core: use device_register and device_unregister
  nvmem: core: add root_only member to nvmem device struct
  extcon: axp288: Add wakeup support
  extcon: Mark extcon_get_edev_name() function as exported symbol
  extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER
  dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format
  ...
2020-04-03 13:22:40 -07:00
Mark Brown 4fcf4b1a05
Merge branch 'topic/ro_wordlength' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into asoc-5.7 2020-03-20 15:33:01 +00:00
Srinivas Kandagatla 39ec6f9921 soundwire: qcom: add support for get_sdw_stream()
Adding support to new get_sdw_stream() that can help machine
driver to deal with soundwire stream.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200317092645.5705-1-srinivas.kandagatla@linaro.org
[fix checkpatch error for "void * qcom_swrm_get_sdw_stream"]
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-20 19:35:40 +05:30
Vinod Koul 1ce7139436 Merge branch 'topic/ro_wordlength' into next 2020-03-20 19:25:14 +05:30
Srinivas Kandagatla a9107de4b0 soundwire: stream: Add read_only_wordlength flag to port properties
According to SoundWire Specification Version 1.2.
"A Data Port number X (in the range 0-14) which supports only one
value of WordLength may implement the WordLength field in the
DPX_BlockCtrl1 Register as Read-Only, returning the fixed value of
WordLength in response to reads."

As WSA881x interfaces in PDM mode making the only field "WordLength"
in DPX_BlockCtrl1" fixed and read-only. Behaviour of writing to this
register on WSA881x soundwire slave with Qualcomm Soundwire Controller
is throwing up an error. Not sure how other controllers deal with
writing to readonly registers, but this patch provides a way to avoid
writes to DPN_BlockCtrl1 register by providing a read_only_wordlength
flag in struct sdw_dpn_prop

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200311113545.23773-2-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-20 19:24:59 +05:30
randerwang b468a785bd soundwire: cadence: clear FIFO to avoid pop noise issue on playback start
Driver should clear FIFO in PDI, or the previously stored sample data
in FIFO will generate pop noise when stream is started. The soft reset
bit will clear all the FIFO to zero and is self-cleared after that.

Signed-off-by: randerwang <rander.wang@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200317163329.25501-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19 12:43:05 +05:30
Pierre-Louis Bossart 2c800e3ba7 soundwire: cadence: multi-link support
Enable multi-link (aka multi-master configuration). In this
configuration, updates and commands with the 'ssp_sync' tag will be
deferred and controlled by the gsync hardware signal.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200317163329.25501-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19 12:43:05 +05:30
Pierre-Louis Bossart b17350e403 soundwire: cadence: commit changes in the exit_reset() sequence
Follow recommended flows, the BUS_RESET must be programmed before the
UPDATE_CONFIG.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200317163329.25501-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19 12:43:04 +05:30
Pierre-Louis Bossart ad473db4ec soundwire: cadence: remove automatic command retries
This is a good idea on paper, but it's not recommended at all when
operating in multi-master mode. It's also not recommended when doing
bank switches, since the retransmission would happen at the next SSP,
and the command protocol is stuck in the mean time.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200317163329.25501-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19 12:43:04 +05:30
Pierre-Louis Bossart 91080111f5 soundwire: cadence: remove PREQ_DELAY assignment
The hardware default is 0x1F, and the existing code does an OR with 0xF.
This is a no-op, remove.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200317163329.25501-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19 12:43:04 +05:30
Pierre-Louis Bossart 5c8f0f68ac soundwire: cadence: enable NORMAL operation in cdns_init()
Follow recommended programming sequences, this needs to be enabled
before the reset sequence.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200317163329.25501-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19 12:43:04 +05:30
Pierre-Louis Bossart b62e76cf39 soundwire: cadence: reorder MCP_CONFIG settings
Follow hardware programming flows and add placeholder comment for
multi-master mode.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200317163329.25501-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19 12:43:04 +05:30
Pierre-Louis Bossart 1dd6a17f35 soundwire: cadence: make SSP interval programmable
In multi-master mode, the IP will only accept SSP intervals with
integer relationships between the frame rate and the gsync frequency.

E.g for a 48kHz frame rate and 4 kHz gsync signal, the SSP interval
can only be 1, 2, 3, 4, 6, 12.

To simplify we only allow one SSP per gsync interval.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200317163329.25501-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19 12:43:04 +05:30
Pierre-Louis Bossart 0cdcdedc15 soundwire: cadence: move clock/SSP related inits to dedicated function
This helps isolate code and align with recommended programming flows

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200317163329.25501-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19 12:43:04 +05:30
Pierre-Louis Bossart 12632459f1 soundwire: cadence: merge routines to clear/set bits
Use a single loop to wait for hardware to set/clear fields.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200317163329.25501-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19 12:43:04 +05:30
Pierre-Louis Bossart af4cc91782 soundwire: cadence: mask Slave interrupt before stopping clock
Intel QA reported a very rare case, possibly hardware-dependent, where
a Slave can become UNATTACHED during a clock stop sequence, which
leads to timeouts and failed suspend sequences.

This patch suppresses the handling of all Slave events while this
transition happens. The two cases that matter are:

a) alerts: if the Slave wants to signal an alert condition, it can do
so using the in-band wake, so there's almost no impact with this
patch.

b) sync loss or imp-def reset: in those cases, bringing back the Slave
to functional state requires a complete re-enumeration. It's better to
just ignore this case and restart cleanly, rather than attempt a
'clean' suspend.

Validation results show the timeouts no longer visible with this patch.

GitHub issue: https://github.com/thesofproject/linux/issues/1678
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200317163329.25501-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19 12:43:04 +05:30
Rander Wang 0d667d01c4 soundwire: cadence: fix a io timeout issue in S3 test
After system resumes from S3, io timeout occurs when setting one
unused master on Comet Lake platform. In this case, the master is
reset to default state, and FIFOLEVEL is reset to default value,
but msg_count used for tracing FIFOLEVEL is still with old value,
so FIFOLEVEL will not be set if a new msg FIFO usage is equal to
the old msg_count.

This patch updates msg_count to default value of FIFOLEVEL when
resetting master.

Tested on Comet Lake platform.

Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200317163329.25501-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19 12:43:04 +05:30
Rander Wang 1032504f22 soundwire: cadence: add clock_stop/restart routines
Add support for clock stop and restart, with two configuration
parameters:

1) when entering the ClockStop mode, Slave-initiated wakes can be
prevented.

2) When exiting the ClockStop mode, the caller can request a Bus Reset
(either if all Slaves were configured in ClockStopMode1 or the Master
IP lost context and enumeration is required)

The code handles the case where no Slaves are present by configuring
the IP to treat COMMAND_IGNORED as success.

The exit_reset part can be dealt with in the caller, along with the
required syncArm/syncGo sequence in multi-link mode.

Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200317163329.25501-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19 12:43:03 +05:30
Pierre-Louis Bossart 9bc87cce94 soundwire: cadence: handle error cases with CONFIG_UPDATE
config_update() may time out or cannot be use in ClockStopMode

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200317163329.25501-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19 12:43:03 +05:30
Rander Wang 5a885c52cf soundwire: cadence: add interface to check clock status
If master is in clock stop state, driver can't modify registers
in master except the registers for clock stop setting.

Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200317163329.25501-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19 12:43:03 +05:30
Rander Wang 7b174f24f4 soundwire: cadence: simplifiy cdns_init()
There is no need for the clock_stop_exit argument with the latest
implementation

Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200317163329.25501-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19 12:43:03 +05:30
Pierre-Louis Bossart ce1acf019f soundwire: cadence: s/update_config/config_update
Somehow we inverted the two, align with register definition to avoid
further confusion.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200317163329.25501-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19 12:43:03 +05:30
Srinivas Kandagatla 0b43fef979 soundwire: stream: use sdw_write instead of update
There is no point in using update for registers with write mask
as 0xFF, this adds unnecessary traffic on the bus.
Just use sdw_write directly.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200312100105.5293-1-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-13 18:06:05 +05:30
Kuninori Morimoto c998ee30e4
ASoC: qcom: use for_each_rtd_codecs/cpus_dai() macro
This patch switch to use plural form macro.

	- for_each_rtd_codec_dai()
	+ for_each_rtd_codec_dais()

	- for_each_rtd_codec_dai_rollback()
	+ for_each_rtd_codec_dais_rollback()

	- for_each_rtd_cpu_dai()
	+ for_each_rtd_cpu_dais()

	- for_each_rtd_cpu_dai_rollback()
	+ for_each_rtd_cpu_dais_rollback()

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87wo7ugogy.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-10 13:35:23 +00:00
Bard Liao 5de79ba865 soundwire: bus: provide correct return value on error
It seems to be a typo. It makes more sense to return the return value
of sdw_update() instead of the value we want to update.

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200227220949.4013-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-03 10:28:46 +05:30
Vinod Koul ed29a0a672 Merge branch 'topic/asoc' into next 2020-02-26 14:18:34 +05:30
Pierre-Louis Bossart 2c6cff682d soundwire: add helper macros for devID fields
Move bit extractors to macros, so that the definitions can be used by
other drivers parsing the MIPI definitions extracted from firmware
tables (ACPI or DT).

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200225170041.23644-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-26 14:18:25 +05:30
Pierre-Louis Bossart eb751d9f1f soundwire: cadence: remove useless prototypes
These prototypes are no longer used, remove.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200225170041.23644-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-26 14:09:14 +05:30
Pierre-Louis Bossart dde73538c9 soundwire: bus: don't treat CMD_IGNORED as error on ClockStop
If a SoundWire link is enabled, but there are no Slave devices exposed
in firmware tables for this link, or no Slaves in ATTACHED or ALERT
mode, the CMD_IGNORED/-ENODATA error code on a broadcast write is
perfectly legit.

Filter this case to report errors and let the caller deal with the
CMD_IGNORED case.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200115000844.14695-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-25 15:57:02 +05:30
Rander Wang 0231453bc0 soundwire: bus: add clock stop helpers
SoundWire supports two clock stop modes. Add support to handle the
clock stop modes and add pm_runtime calls in the bus.

Credits: this patch is based on an earlier internal contribution by
Vinod Koul, Sanyog Kale, Shreyas Nc and Hardik Shah.

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200115000844.14695-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-25 15:57:02 +05:30
Rander Wang aa79293517 soundwire: bus: fix io error when processing alert event
There are two types of io errors when processing alert event.

a) the Master detects an ALERT status for e.g. a jack event and
invokes the implementation-defined function in the Slave driver to
check the jack status. At this time the codec is just suspended, so io
registers can't be accessed.

b) when waking up from clock stop mode1 state, where the bus needs a
complete re-enumeration, Slave registers can't be accessed until the
enumeration is complete.

This patch resumes the Slave device and waits for initialization
complete when processing slave alert event, so that registers on the
Slave can be accessed without timeouts or io errors.

Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200115000844.14695-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-25 15:57:02 +05:30
Pierre-Louis Bossart dff70572e9 soundwire: bus: disable pm_runtime in sdw_slave_delete
Before removing the slave device, disable pm_runtime to prevent any
race condition with the resume being executed after the bus and slave
devices are removed.

Since this pm_runtime_disable() is handled in common routines,
implementations of Slave drivers do not need to call it in their
.remove() routine.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200115000844.14695-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-25 15:57:02 +05:30
Pierre-Louis Bossart 3ab2ca405a soundwire: bus: add helper to clear Slave status to UNATTACHED
When resuming with a bus reset, we need to re-enumerate and restart
from UNATTACHED. The helper added in this patch helps implement a more
robust state machine avoiding race conditions on resume.

The unattach request is stored and will be used by Slave drivers, if
needed: Intel validation exposed a corner case where the Slave device
may transition to D3 when streaming stops, but streaming restarts
before the Master transitions to D3. In that case, the Slave status
was not cleared as UNATTACHED by the Master resuming, and the
wait_for_completion will time out.

When the slave resumes, it can check if a Master-initiated
re-enumeration and initialization took place and skip the
wait_for_completion() if there is no reason to wait.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200115000844.14695-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-25 15:57:02 +05:30
Pierre-Louis Bossart d300de4f2d soundwire: bus: write Slave Device Number without runtime_pm
While handling the Device0, we can safely use sdw_write_no_pm.

This move will also helps us track that all other usages of
sdw_write() happen when the Slave is already enumerated.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200115000844.14695-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-25 15:57:02 +05:30
Pierre-Louis Bossart 60ee9be255 soundwire: bus: add PM/no-PM versions of read/write functions
Add support for pm_runtime with the appropriate error checks for
sdw_write/read functions, e.g. when pm_runtime is not supported.

Also expose internal functions without pm_runtime support, which are
required to perform any sort of suspend/resume operation, as well as
any enumeration tasks.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200115000844.14695-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-25 15:57:02 +05:30
Pierre-Louis Bossart a90def0681 soundwire: bus: fix race condition with initialization_complete signaling
Waiting for the enumeration to be complete may not be enough for a
Slave driver, there is a possible race condition between resume
operations and initializations handled in an interrupt thread, which
can results in settings not being fully restored after system or
pm_runtime resume.

This patch builds on the changes added for enumeration_complete,
init_completion() is called when the Slave device becomes UNATTACHED,
as done with enumeration_complete.

The difference with the enumeration_complete case is that complete()
is signaled after the Slave device is fully initialized after the
.update_status() callback is called.

A Slave device driver can decide to wait on either of the two
complete() cases, depending on its initialization code and
requirements.

Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200115000844.14695-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-25 15:57:02 +05:30
Pierre-Louis Bossart fb9469e54f soundwire: bus: fix race condition with enumeration_complete signaling
This patch adds the signaling needed for Slave drivers to wait until
the enumeration completes so that race conditions when issuing
read/write commands are avoided. The calls for wait_for_completion()
will be added in codec drivers in follow-up patches.

The order between init_completion() and complete() is deterministic,
the Slave is marked as UNATTACHED either during a Master-initiated
HardReset, or when the hardware detects the Slave no longer reports as
ATTACHED.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200115000844.14695-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-25 15:57:02 +05:30
Pierre-Louis Bossart 2140b66b5d soundwire: bus: fix race condition with probe_complete signaling
The driver probe takes care of basic initialization and is invoked
when a Slave becomes attached, after a match between the Slave DevID
registers and ACPI/DT entries.

The update_status callback is invoked when a Slave state changes,
e.g. when it is assigned a non-zero Device Number and it reports with
an ATTACHED/ALERT state.

The state change detection is usually hardware-based and based on the
SoundWire frame rate (e.g. double-digit microseconds) while the probe
is a pure software operation, which may involve a kernel module
load. In corner cases, it's possible that the state changes before the
probe completes.

This patch suggests the use of wait_for_completion to avoid races on
startup, so that the update_status callback does not rely on invalid
pointers/data structures.

Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200115000844.14695-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-25 15:57:01 +05:30
Kuninori Morimoto ce83baca85
ASoC: soundwaire: qcom: use for_each_rtd_codec_dai() macro
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87o8tvjcbc.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-02-19 17:12:14 +00:00
Pierre-Louis Bossart eff346f24b soundwire: intel: free all resources on hw_free()
Make sure all calls to the SoundWire stream API are done and involve
callback. Also kfree the stream name.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Acked-by: Sanyog Kale <sanyog.r.kale@intel.com>
Link: https://lore.kernel.org/r/20200215014740.27580-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-18 14:09:52 +05:30
Rander Wang 5e7484d019 soundwire: intel: add sdw_stream_setup helper for .startup callback
The sdw stream is allocated and stored in dai to share the sdw runtime
information.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Acked-by: Sanyog Kale <sanyog.r.kale@intel.com>
Link: https://lore.kernel.org/r/20200215014740.27580-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-18 14:09:52 +05:30
Rander Wang 973a842940 soundwire: intel: add trigger support in sdw dai driver
The existing code does not expose a trigger callback, which is very
much required for streaming.

The SoundWire stream is enabled and disabled in trigger function.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Acked-by: Sanyog Kale <sanyog.r.kale@intel.com>
Link: https://lore.kernel.org/r/20200215014740.27580-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-18 14:09:52 +05:30
Rander Wang 27b198f409 soundwire: intel: add prepare support in sdw dai driver
The existing code does not expose a prepare operation, which is very
much needed to deal with underflow and resume operations.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Acked-by: Sanyog Kale <sanyog.r.kale@intel.com>
Link: https://lore.kernel.org/r/20200215014740.27580-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-18 14:09:51 +05:30
Pierre-Louis Bossart 2523486b98 soundwire: intel: rename res field as link_res
There are too many fields called 'res' so add prefix to make it easier
to track what the structures are.

Pure rename, no functionality change

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Sanyog Kale <sanyog.r.kale@intel.com>
Link: https://lore.kernel.org/r/20200215014740.27580-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-18 14:09:51 +05:30
Rander Wang bfaa354954 soundwire: stream: don't program ports when a stream that has not been prepared
In the Intel QA multi-pipelines test case, there are two pipelines for
playback and capture on the same bus. The test fails with an error
when setting port params:

[  599.224812] rt711 sdw:0:25d:711:0: invalid dpn_prop direction 1 port_num 0
[  599.224815] sdw_program_slave_port_params failed -22
[  599.224819] intel-sdw sdw-master-0: Program transport params failed: -22
[  599.224822] intel-sdw sdw-master-0: Program params failed: -22
[  599.224828] sdw_enable_stream: SDW0 Pin2-Playback: done

This problem is root-caused to the programming of the capture stream
ports while it is not yet prepared, the calling sequence is:

(1) hw_params for playback. The playback stream provide the port
    information to Bus.
(2) stream_prepare for playback, Transport and port parameters
    are computed for playback.
(3) hw_params for capture. The capture stream provide the port
    information to Bus, but it has not been prepared so is not
    accounted for in the bandwidth allocation.
(4) stream_enable for playback. Program transport and port parameters
    for all masters and slaves. Since the transport and port parameters
    are not computed for capture stream, sdw_program_slave_port_params
    will generate a error when setting port params for capture.

in step (4), we should only program the ports for the stream that have
been prepared. A stream that is only in CONFIGURED state should be
ignored, its ports will be programmed when it becomes PREPARED.

Tested on Comet Lake.

GitHub issue: https://github.com/thesofproject/linux/issues/1637
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20200114235227.14502-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-13 15:57:37 +05:30
Rander Wang 60835022e1 soundwire: stream: fix support for multiple Slaves on the same link
The existing code will unconditionally return after dealing with the
first Slave on a link. This return should only happen when there is
an error case.

Tested on Comet Lake platform.

Signed-off-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20200114235227.14502-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-13 15:57:37 +05:30
Pierre-Louis Bossart c7a8f049b8 soundwire: stream: do not update parameters during DISABLED-PREPARED transition
After a system suspend, the ALSA/ASoC core will invoke the .prepare()
callback and a TRIGGER_START when INFO_RESUME is not supported.

Likewise, when an underflow occurs, the .prepare callback will be invoked.

In both cases, the stream can be in DISABLED mode, and will transition
into the PREPARED mode. We however don't want the bus bandwidth to be
recomputed.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200114235227.14502-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-13 15:57:37 +05:30
Bard Liao c32464c939 soundwire: stream: only prepare stream when it is configured.
We don't need to prepare the stream again if the stream is already
prepared.

sdw_prepare_stream() could be called multiple times without calling
sdw_deprepare_stream(). We call sdw_prepare_stream() in the prepare
dai ops and sdw_deprepare_stream() in the hw_free dai ops. If an xrun
happens, sdw_prepare_stream() will be called but
sdw_deprepare_stream() will not, which results in an imbalance and an
invalid total bandwidth.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200114235227.14502-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-13 15:57:37 +05:30
Pierre-Louis Bossart 5952880771 soundwire: stream: update state machine and add state checks
The state machine and notes don't accurately explain or allow
transitions from STREAM_DEPREPARED and STREAM_DISABLED.

Add more explanations and allow for more transitions as a result of a
trigger_stop(), trigger_suspend() and prepare(), depending on the
ALSA/ASoC layer behavior defined by the INFO_RESUME and INFO_PAUSE
flags.

Also add basic checks to help debug inconsistent states and illegal
state machine transitions.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200114235227.14502-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-13 15:57:37 +05:30
Pierre-Louis Bossart 550f905204 soundwire: cadence: fix kernel-doc parameter descriptions
Fix previous update, bad git merge likely. oops.

Fixes: 39737a3130 ("soundwire: cadence: update kernel-doc parameter descriptions")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200114233124.13888-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-16 17:34:38 +05:30
Bard Liao a19efb5265 soundwire: intel: fix factor of two in MCLK handling
Somehow Intel folks were confused, the property is 2x what the mclk
frequency actually is (checked the actual bus frequency with a scope)

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200113231129.19049-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-14 12:05:52 +05:30
Pierre-Louis Bossart fd6a3ac8e8 soundwire: bus: fix device number leak on errors
If the programming of the dev_number fails due to an IO error, a new
device_number will be assigned, resulting in a leak.

Make sure we only assign a device_number once per Slave device.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200113225637.17313-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-14 12:05:52 +05:30
Pierre-Louis Bossart 78f6fdd616 soundwire: cadence: remove useless variable incrementation
Fix cppcheck warning:

drivers/soundwire/cadence_master.c:992:9: style: Variable 'offset' is
assigned a value that is never used. [unreadVariable]
 offset += stream->num_out;
        ^

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200113211025.27973-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-14 12:02:29 +05:30
Pierre-Louis Bossart 39737a3130 soundwire: cadence: update kernel-doc parameter descriptions
make W=1 reports inconsistencies with parameter descriptions, fix

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200113211025.27973-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-14 12:02:29 +05:30
Srinivas Kandagatla 02efb49aa8 soundwire: qcom: add support for SoundWire controller
Qualcomm SoundWire Master controller is present in most Qualcomm SoCs
either integrated as part of WCD audio codecs via slimbus or
as part of SOC I/O.

This patchset adds support to a very basic controller which has been
tested with WCD934x SoundWire controller connected to WSA881x smart
speaker amplifiers.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200113132153.27239-3-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-14 11:57:47 +05:30
Pierre-Louis Bossart 6106190158 soundwire: bus: check first if Slaves become UNATTACHED
Before checking for the presence of Device0, we first need to clean-up
the internal state of Slaves that are no longer attached.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200110215731.30747-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-14 11:53:12 +05:30
Pierre-Louis Bossart 7181b1d41d soundwire: cadence_master: handle multiple status reports per Slave
When a Slave reports multiple status in the sticky bits, find the
latest configuration from the mirror of the PING frame status and
update the status directly.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200110215731.30747-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-14 11:53:12 +05:30
Rander Wang ae478d6e19 soundwire: cadence_master: remove config update for interrupt setting
Config only needs to be updated when setting MCP_Config, MCP_Control
and MCP_CmdCtrl to make these register setting effective. When updating
config in master, master will communicate with slave to update status.
Communication will be failed when masters and slaves are in clock stop
state, and this unnecessary config update makes interrupt setting failed.

Tested on Comet Lake with soundwire enabled

Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200110215731.30747-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-14 11:53:12 +05:30
Pierre-Louis Bossart 53ee957269 soundwire: cadence_master: log more useful information during timeouts
Add the type of command, device number, register offset and length to
reverse engineer what caused the issue.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200110215731.30747-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-14 11:53:12 +05:30
Rander Wang 5ebb094541 soundwire: cadence_master: clear interrupt status before enabling interrupt
make sure all interrupts status are cleared before enabling interrupt
so that there is no unexpected interrupt triggered.

Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200110215731.30747-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-14 11:53:12 +05:30
Pierre-Louis Bossart a2cff9ee4b soundwire: cadence_master: filter out bad interrupts
If somehow we read the interrupt status while the IP is not powered
the result is probably undefined or 0xffffffff. We do know that some
of the bits are reserved and read as zero, so use as a filter to
discard invalid configurations.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200110215731.30747-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-14 11:53:12 +05:30
Pierre-Louis Bossart b637124800 soundwire: stream: remove redundant pr_err traces
Only keep pr_err to flag critical configuration errors that will
typically only happen during system integration.

For errors on prepare/deprepare/enable/disable, the caller can do a
much better job with more information on the DAI and device that
caused the issue.

Suggested-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200108175438.13121-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-10 12:34:17 +05:30
Rander Wang 4b206d34b9 soundwire: intel: update stream callbacks for hwparams/free stream operations
The SoundWire DAIs for Intel platform are created in
drivers/soundwire/intel.c, while the communication with the Intel DSP
is all controlled in soc/sof/intel

When the DAI status changes, a callback is used to bridge the gap
between the two subsystems.

The naming of the existing 'config_stream' callback does not map well
with any of ALSA/ASoC concepts. This patch renames it as
'params_stream' to be more self-explanatory.

A new 'free_stream' callback is added in case any resources allocated
in the 'params_stream' stage need to be released. In the SOF
implementation, this is used in the hw_free case to release the DMA
channels over IPC.

These two callbacks now rely on structures which expose the link_id
and alh_stream_id (required by the firmware IPC), instead of a list of
parameters. The 'void *' definitions are changed to use explicit
types, as suggested on alsa-devel during earlier reviews.

Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191212014507.28050-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-12 09:17:06 +05:30
Pierre-Louis Bossart f98f690fb0 soundwire: intel: update interfaces between ASoC and SoundWire
The current interfaces between ASoC and SoundWire are limited by the
platform_device infrastructure to an init() and exit() (mapped to the
platform driver.probe and .remove)

To help with the platform detection, machine driver selection and
management of power dependencies between DSP and SoundWire IP, the
ASoC side requires:

a) an ACPI scan helper, to report if any devices are exposed in the
DSDT tables, and if any links are disabled by the BIOS.

b) a probe helper that allocates the resources without actually
starting the bus.

c) a startup helper which does start the bus when all power
dependencies are settled.

d) an exit helper to free all resources

e) an interrupt_enable/disable helper, typically invoked after the
startup helper but also used in suspend routines.

This patch moves all required interfaces to sdw_intel.h, mainly to
allow SoundWire and ASoC parts to be merged separately once the header
files are shared between trees.

To avoid compilation issues, the conflicts in intel_init.c are blindly
removed. This would in theory prevent the code from working, but since
there are no users of the Intel Soundwire driver this has no
impact. Functionality will be restored when the removal of platform
devices is complete.

Support for SoundWire + SOF builds will only be provided once all the
required pieces are upstream.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191212014507.28050-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-12 09:17:06 +05:30
Greg Kroah-Hartman 01b59c763f Merge 5.4-rc7 into char-misc-next
We need the char/misc driver fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-11 06:24:30 +01:00
Pierre-Louis Bossart 2e8c4ad1f0 soundwire: ignore uniqueID when irrelevant
The uniqueID is useful when there are two or more devices of the same
type (identical manufacturer ID, part ID) on the same link.

When there is a single device of a given type on a link, its uniqueID
is irrelevant. It's not uncommon on actual platforms to see variations
of the uniqueID, or differences between devID registers and ACPI _ADR
fields.

This patch suggests a filter on startup to identify 'single' devices
and tag them accordingly. The uniqueID is then not used for the probe,
and the device name omits the uniqueID as well.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191022234808.17432-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-09 16:46:56 +05:30
Pierre-Louis Bossart de5b174b3b soundwire: slave: add helper to extract slave ID
Simplify the loop with a helper. The only functionality change is that
we continue the loop even with an ACPI error.

Follow-up patches will build on this change.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191022234808.17432-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-09 16:46:56 +05:30
Pierre-Louis Bossart c134f914e9 soundwire: intel: fix PDI/stream mapping for Bulk
The previous formula is incorrect for PDI0/1, the mapping is not
linear but has a discontinuity between PDI1 and PDI2.

This change has no effect on PCM PDIs (same mapping).

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191022232948.17156-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-09 16:44:44 +05:30
Pierre-Louis Bossart 3ccb8551f5 soundwire: cadence_master: make clock stop exit configurable on init
The use of clock stop is not a requirement, the IP can e.g. be
completely power gated and not detect any wakes while in s2idle/deep
sleep.

For now clock-stop is not supported anyways so the control parameter
is always false. This will be revisited when we add clock stop.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191022235448.17586-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-24 17:22:01 +05:30
Pierre-Louis Bossart 9e3d47fb2b soundwire: intel/cadence: add flag for interrupt enable
Prepare for future PM support and fix error handling by disabling
interrupts as needed.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191022235448.17586-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-24 17:22:01 +05:30
Pierre-Louis Bossart dfbe642d1e soundwire: intel: add helper for initialization
Move code to helper for reuse in power management routines

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191022235448.17586-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-24 17:22:01 +05:30
Pierre-Louis Bossart 675d4c9aba soundwire: cadence_master: add hw_reset capability in debugfs
Provide debugfs capability to kick link and devices into hard-reset
(as defined by MIPI). This capability is really useful when some
devices are no longer responsive and/or to check the software handling
of resynchronization.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191022235448.17586-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-24 17:22:01 +05:30
Pierre-Louis Bossart 49ea07d33d soundwire: intel/cadence: fix startup sequence
Multiple changes squashed in single patch to avoid tick-tock effect
and avoid breaking compilation/bisect

1. Per the hardware documentation, all changes to MCP_CONFIG,
MCP_CONTROL, MCP_CMDCTRL and MCP_PHYCTRL need to be validated with a
self-clearing write to MCP_CONFIG_UPDATE. Add a helper and do the
update when the CONFIG is changed.

2. Move interrupt enable after interrupt handler registration

3. Add a new helper to start the hardware bus reset with maximum duration
to make sure the Slave(s) correctly detect the reset pattern and to
ensure electrical conflicts can be resolved.

4. flush command FIFOs

Better error handling will be provided after interrupt disable is
provided in follow-up patches.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191022235448.17586-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-24 17:22:01 +05:30
Pierre-Louis Bossart 7b47ad3322 soundwire: slave: fix scanf format
fix cppcheck warning:

[drivers/soundwire/slave.c:145]: (warning) %x in format string (no. 1)
requires 'unsigned int *' but the argument type is 'signed int *'.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191022233147.17268-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-24 16:55:45 +05:30
Vinod Koul 3fc40449a0 soundwire: intel: use correct header for io calls
Commit df72b71921 ("soundwire: intel: add missing headers for
cross-compilation") tried to fix cross compilation but erroneously used
wrong header in one of the file. Fix it by using correct io.h header.

Reported-by: kbuild test robot <lkp@intel.com>
Fixes: df72b71921 ("soundwire: intel: add missing headers for cross-compilation")
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-22 10:03:08 +05:30
Bard Liao cf9249626f soundwire: intel: fix intel_register_dai PDI offsets and numbers
There are two issues, likely copy/paste:

1. Use cdns->pcm.num_in instead of stream_num_in for consistency with
the rest of the code. This was not detected earlier since platforms did
not have input-only PDIs.

2. use the correct offset for bi-dir PDM, based on IN and OUT
PDIs. Again this was not detected since PDM was not supported earlier.

Reported-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190916192348.467-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-21 09:51:02 +05:30
Bard Liao 1b53385e79 soundwire: cadence_master: improve PDI allocation
PDI number should match dai->id, there is no need to track if a PDI is
allocated or not.

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190916192348.467-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-21 09:50:53 +05:30
Pierre-Louis Bossart 807c15bc77 soundwire: intel: don't filter out PDI0/1
PDI0/1 are reserved for Bulk and filtered out in the existing code.
That leads to endless confusions on whether the index is the raw or
corrected one. In addition we will need support for Bulk at some point
so it's just simpler to expose those PDIs and not use it for now than
try to be smart unless we have to remove the smarts.

This patch requires a topology change to use PDIs starting at offset 2
explicitly.

Note that there is a known discrepancy between hardware documentation
and what ALH stream works in practice, future fixes are likely.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190916192348.467-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-21 09:50:53 +05:30
Pierre-Louis Bossart 57a34790cd soundwire: cadence/intel: simplify PDI/port mapping
The existing Linux code uses a 1:1 mapping between ports and PDIs, but
still has an independent allocation of ports and PDIs.

Let's simplify the code and remove the port layer by only using PDIs.

This patch does not change any functionality, just removes unnecessary
code.

This will also allow for further simplifications where the PDIs are
not dynamically allocated but instead described in a topology file.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190916192348.467-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-21 09:50:53 +05:30
Bard Liao 80464533e1 soundwire: intel: remove playback/capture stream_name
We will create dai widget in SOF.

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190916192348.467-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-21 09:50:53 +05:30
Pierre-Louis Bossart 535bbe6a1f soundwire: remove DAI_ID_RANGE definitions
There is no reason to reserve a range of DAI IDs for SoundWire. This
is not scalable and it's better to let the ASoC core allocate the
dai->id when registering a component.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190916192348.467-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-21 09:50:53 +05:30