Граф коммитов

1852 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds 9641219825 Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (103 commits)
  usbcore: remove unused argument in autosuspend
  USB: keep count of unsuspended children
  USB hub: simplify remote-wakeup handling
  USB: struct usb_device: change flag to bitflag
  OHCI: make autostop conditional on CONFIG_PM
  USB: Add autosuspend support to the hub driver
  EHCI: Fix root-hub and port suspend/resume problems
  USB: create a new thread for every USB device found during the probe sequence
  USB: add driver for the USB debug devices
  USB: added dynamic major number for USB endpoints
  USB: pegasus error path not resetting task's state
  USB: endianness fix for asix.c
  USB: build the appledisplay driver
  USB serial: replace kmalloc+memset with kzalloc
  USB: hid-core: canonical defines for Apple USB device IDs
  USB: idmouse cleanup
  USB: make drivers/usb/core/driver.c:usb_device_match() static
  USB: lh7a40x_udc remove double declaration
  USB: pxa2xx_udc recognizes ixp425 rev b0 chip
  usbtouchscreen: add support for DMC TSC-10/25 devices
  ...
2006-12-01 16:41:58 -08:00
Mariusz Kozlowski 8563650da0 usb: zc0301_core free urb cleanup
- usb_free_urb() cleanup

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01 14:23:33 -08:00
Mariusz Kozlowski 926b1e9009 usb: quickcam_messenger free urb cleanup
- usb_free_urb() cleanup

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01 14:23:33 -08:00
Mariusz Kozlowski 14d2707b80 usb: sn9c102_core free urb cleanup
- usb_free_urb() cleanup

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01 14:23:33 -08:00
Mariusz Kozlowski 90b2625a51 usb: pwc-if free urb cleanup
- usb_free_urb() cleanup

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01 14:23:32 -08:00
Mariusz Kozlowski 4c6f7d4a88 usb: pvrusb2-io free urb cleanup
- usb_free_urb() cleanup

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01 14:23:32 -08:00
Mariusz Kozlowski 5e55d2cea8 usb: pvrusb2-hdw free unlink urb cleanup
- usb_free_urb() cleanup
- usb_unlink_urb() cleanup

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01 14:23:32 -08:00
Mariusz Kozlowski 5d02d027ac usb: ttusb_dec free urb cleanup
- usb_free_urb() cleanup

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01 14:23:32 -08:00
Mariusz Kozlowski 4064fe43e8 usb: cinergyT2 free kill urb cleanup
- usb_free_urb() cleanup
- usb_kill_urb() cleanup

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01 14:23:32 -08:00
Mariusz Kozlowski 444f4f91fd USB: pwc-if loop fix
We should free urbs starting at [i-1] not [i].

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01 14:23:31 -08:00
Eric Sesterhenn 5d9a276a3e BUG_ON conversion for drivers/media/video/pwc/pwc-if.c
This patch converts a if () BUG(); construct to BUG_ON();
which occupies less space, uses unlikely and is safer when
BUG() is disabled.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-30 05:26:46 +01:00
Matt LaPlante 0779bf2d2e Fix misc .c/.h comment typos
Fix various .c/.h typos in comments (no code changes).

Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-30 05:24:39 +01:00
Matt LaPlante 3cb2fccc5f Fix misc Kconfig typos
Fix various Kconfig typos.

Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-30 05:22:59 +01:00
Andrew de Quincey 221a09d5c4 V4L/DVB (4874): Fix oops on symbol rate==0
The tda10086 causes an oops (divide by zero) if a zero symbol rate is used;
this prevents this.

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-26 11:02:43 -02:00
Hans Verkuil f7668162a3 V4L/DVB (4885): Improve saa711x check
The old code would accept any device on the same i2c address as the
saa711x chips as an saa711x. However, this fails with saa717x chips,
which use that same address and so are misdetected as a saa7111. Now
check whether the chip is really a saa711x model.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-26 08:52:38 -02:00
Luca Risolia 5718bbd2d9 V4L/DVB (4865): Fix: Slot 0 not NULL on disconnecting SN9C10x PC Camera
The patch fix bug 5748.

Signed-off-by: Luca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-26 08:52:37 -02:00
Ira Snyder a5bbc7d94c V4L/DVB (4849): Add missing spin_unlock to saa6588 decoder driver
Sparse noticed a lock imbalance in read_from_buf(). Further inspection shows
that the lock should not be held when the function exits.
This adds a spin_unlock_irqrestore(), so that every exit path of the
read_from_buf() function is consistent. The unlock was missing on an error
path.

Signed-off-by: Ira W. Snyder <devel@irasnyder.com>
Signed-off-by: Hans J. Koch <koch@hjk-az.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-26 08:52:37 -02:00
Andrew de Quincey 30d9464c76 V4L/DVB (4832): Fix uninitialised variable in dvb_frontend_swzigzag
Spotted by coverity/Adrian Bunk.

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-26 08:52:37 -02:00
Oliver Endriss bc495b66d0 V4L/DVB (4840): Budget: diseqc_method module parameter for cards with subsystem-id 13c2:1003
New module parameter diseqc_method for cards with subsystem-id 13c2:1003.
- 0: unreliable method, can be used by all board revisions (default)
- 1: reliable method, works for newer board layouts only
The parameter has no effect for cards with other subsystem-ids.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-26 08:52:37 -02:00
Andrew de Quincey c4e46b9567 V4L/DVB (4831): Fix tuning on older budget DVBS cards.
Fixes to DISEQC on these cards inadvertently broke normal tone/voltage
signalling. This restores the necessary function.

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-26 08:52:37 -02:00
Linus Torvalds 4dd7406e9c [dvb saa7134] Fix missing 'break' for avermedia card case
Commit 450efcfd2e broke Avermedia 777
support.

Added obvious missing "break" statement.

Cc: Jos Surez <j.suarez.agapito@gmail.com>
Cc: Michael Krufky <mkrufky@linuxtv.org>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-13 09:50:11 -08:00
Alexey Dobriyan 6f36fbb242 V4L/DVB (4818): Flexcop-usb: fix debug printk
.. fix debug printk. Why, oh why, one would want to do
	(u16 & 0xff) << 8
and print it with %02x format?
Acked-by: Patrick Boettcher <pb@linuxtv.org>

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-13 08:17:30 -02:00
Jean Delvare fef4fa1475 V4L/DVB (4817): Fix uses of "&&" where "&" was intended
Fix uses of "&&" where "&" was intended in bttv-cards.c and tveeprom.c

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-13 08:17:28 -02:00
pasky@ucw.cz 0871a8849b V4L/DVB (4816): Change tuner type for Avermedia A16AR
This changes it from TDA8290 which is allegedly very unlikely to TD1316 which
is allegedly very likely. I didn't get it to work with either, but expected
that this got applied when Mauro sent it to me, so here it goes again; feel
free to drop it to the floor. :-)

Signed-off-by: Petr Baudis <pasky@ucw.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-13 08:17:26 -02:00
pasky@ucw.cz 29e0f1a136 V4L/DVB (4815): Remote support for Avermedia A16AR
The remote as well as the GPIO interface is the same as what comes with 777.
For an example of mplayer lirc configuration, see
	http://pasky.or.cz/~pasky/dev/v4l/lircrc

Signed-off-by: Petr Baudis <pasky@ucw.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-13 08:17:25 -02:00
pasky@ucw.cz 450efcfd2e V4L/DVB (4814): Remote support for Avermedia 777
I didn't test it personally since I don't have this card, but A16AR uses the
same interface and that one certainly does work perfectly (see the next patch).
This patch was originally sent in
	http://marc.theaimsgroup.com/?l=linux-video&m=114743413825375&w=2
	https://www.redhat.com/mailman/private/video4linux-list/2006-May/msg00103.html
but never got applied. This version has some trivial modifications and drops
the weird gpio hack (it's not clear what practical purpose does it serve).

Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net>
Signed-off-by: Petr Baudis <pasky@ucw.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-13 08:17:23 -02:00
Mauro Carvalho Chehab ce48d5ecf3 V4L/DVB (4804): Fix missing i2c dependency for saa7110
drivers/media/video/saa7110.c:112: undefined reference to `i2c_master_send'
drivers/built-in.o: In function `saa7110_read':
drivers/media/video/saa7110.c:130: undefined reference to `i2c_smbus_read_byte'
drivers/media/video/saa7110.c:130: undefined reference to `i2c_smbus_read_byte'

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-13 08:17:21 -02:00
Hermann Pitton ff97d93d6a V4L/DVB (4802): Cx88: fix remote control on WinFast 2000XP Expert
fix remote control on WinFast 2000XP Expert by setting timing back to 1 ms,
like it was in the original patch by Robert Reid.

Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-13 08:17:20 -02:00
Alexey Dobriyan d027c4dc7d V4L/DVB (4795): Tda826x: use correct max frequency
sparse "defined twice" warning

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-13 08:17:19 -02:00
Trent Piepho c5dec9fb24 V4L/DVB (4751): Fix DBV_FE_CUSTOMISE for card drivers compiled into kernel
When a front-end is disabled, card drivers that use it are compiled with
a stub version of the front-end's attach function.  This way they have no
references to the front-end's code and don't need it to be loaded.
If a card driver is compiled into the kernel, and a front-end is a
module, then that front-end is effectively disabled wrt the card driver. 
In this case, the card driver should get the stub version.  This was not
happening.
The stub vs real attach function selection is changed so that when the
front-end is a module the real attach function is only used if the card
driver is a module as well.  This means a module front-end will be
supported by card drivers that are modules and not supported by card
drivers compiled into the kernel.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-03 00:49:40 -03:00
Oliver Endriss 9bb6e2593a V4L/DVB (4784): [saa7146_i2c] short_delay mode fixed for fast machines
TT DVB-C 2300 runs at 137 kHz I2C speed. short_delay mode did not work
reliably on fast machines with that speed. Increased max loop count from
20 to 50. Moved dummy access out of the loop.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-02 23:58:11 -03:00
Hartmut Hackmann 588f98312c V4L/DVB (4770): Fix mode switch of Compro Videomate T300
The board did not return to analog mode since the board specific
"demod sleep" function was not called. 

Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-02 23:58:10 -03:00
Raymond Mantchala 9e741b74af V4L/DVB (4787): Budget-ci: Inversion setting fixed for Technotrend 1500 T
Technotrend 1500 T card have "inverted inversion". This patch fixes that.
Many thanks to Martin Zwickel from Technotrend for his confirmation and
correction proposal.

Signed-off-by: Raymond Mantchala <raymond.mantchala@streamvision.fr>
Signed-off-by: Perceval Anichini <perceval.anichini@streamvision.fr>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-02 23:58:09 -03:00
Randy Dunlap c2625bff99 V4L/DVB (4786): Pvrusb2: use NULL instead of 0
Fix sparse NULL usage warnings:
drivers/media/video/pvrusb2/pvrusb2-v4l2.c:714:14: warning: Using plain integer as NULL pointer
drivers/media/video/pvrusb2/pvrusb2-v4l2.c:715:16: warning: Using plain integer as NULL pointer
drivers/media/video/pvrusb2/pvrusb2-v4l2.c:1079:10: warning: Using plain integer as NULL pointer
drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c:224:58: warning: Using plain integer as NULL pointer

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-02 23:58:08 -03:00
David Hrdeman ecba77f246 V4L/DVB (4785): Budget-ci: Change DEBIADDR_IR to a safer default
The IR chip has no address decoding, so the IR data is always present in 
the high byte when doing a read from the saa7146 chip. This means that 
the DEBI address used is irrelevant to the IR decoding logic.
DEBI addresses 0x1XXX are mapped to the registers on the CI module 
itself, but only the lowest two bits are actually used (see EN50221, 
section A.2.2.1), meaning that 0x1234 is equivalent to 0x1000 which maps 
to register 0 (the data register). A read from the data register is 
supposed to be preceded by a read from the size register, so some CI 
modules will be confused (the AlphaCrypt CAM will hang completely).
The attached patch changes the address used when reading the IR data to 
use 0x4000 instead. This is the CI version address, which is a safer 
default, works with the AlphaCrypt CAM and matches the behaviour of the 
Windows driver (AFAIK).

Signed-off-by: David Hrdeman <david@hardeman.nu>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-02 23:58:06 -03:00
Trent Piepho 6c8c21b911 V4L/DVB (4752): DVB: Add DVB_FE_CUSTOMISE support for MT2060
Let the MT2060 be customized like most of the other DVB PLLs/front-ends. 
Also, add a missing dependency on I2C.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-02 23:58:04 -03:00
Patrick Boettcher 5570dd02ca V4L/DVB (4750): AGC command1/2 is board specific
Added config-struct-parameter to take board-specific AGC command 1 and 2 into account.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-14 00:44:29 -03:00
Patrick Boettcher 6a74216c45 V4L/DVB (4748): Fixed oops for Nova-T USB2
When using the remote control with the Nova-T USB there was an Oops because of
the recent DVB-USB-Adapter change.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-14 00:44:28 -03:00
Hans Verkuil 1d3e6bdaa8 V4L/DVB (4744): The Samsung TCPN2121P30A does not have a tda9887
Contrary to all expections the Samsung TCPN2121P30A tuner does
NOT have a tda9887. Remove the tda9887 flag from the tuner
definition.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-14 00:44:22 -03:00
Jonathan Corbet 83427ac5d6 V4L/DVB (4743): Fix oops in VIDIOC_G_PARM
The call to v4l2_std_construct() in the VIDIOC_G_PARM handler treats
vfd->current_norm as if it were an index - but it's not.  The result is
an oops if the driver has no vidioc_g_parm() method defined.  Here's the
fix.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-14 00:44:20 -03:00
Jeff Garzik c12e3be086 V4L/DVB (4742): Drivers/media/video: handle sysfs errors
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-14 00:44:17 -03:00
Jeff Garzik 2444a2fca4 V4L/DVB (4741): {ov511,stv680}: handle sysfs errors
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-14 00:44:13 -03:00
Enrico Scholz 474ce78130 V4L/DVB (4740): Fixed an if-block to avoid floating with debug-messages
The dbgarg() macro in videodev.c contains some printk() statements
where only the first one is influenced by an if-statement. This causes
floating with debug-messages which is fixed by this patch by adding a
'{ ... }' pair.

Signed-off-by: Enrico Scholz <enrico.scholz@informatik.tu-chemnitz.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-14 00:44:12 -03:00
Pdraig Brady fc2fa31f4e V4L/DVB (4739): SECAM support for saa7113 into saa7115
Without the attached trivial patch, the saa7113 is set up for PAL when SECAM 
is selected and hence will see only show black and white for SECAM signals.
Tested the patch against the saa7115 module in linux-2.6.17 with a 
Pinnacle 50e USB tuner (em28xx).

Signed-off-by: Pdraig Brady <P@draigBrady.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-14 00:44:10 -03:00
Amit Choudhary 626ae83bb2 V4L/DVB (4738): Bt8xx/dvb-bt8xx.c: check kmalloc() return value.
Check the return value of kmalloc() in function frontend_init(), 
in file drivers/media/dvb/bt8xx/dvb-bt8xx.c.

Signed-off-by: Amit Choudhary <amit2030@gmail.com>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-14 00:44:08 -03:00
Michael Krufky c071fab453 V4L/DVB (4734): Tda826x: fix frontend selection for dvb_attach
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-14 00:44:06 -03:00
Michael Krufky fc13d929cc V4L/DVB (4733): Tda10086: fix frontend selection for dvb_attach
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-14 00:44:02 -03:00
Uwe Bugla 934765b8e2 V4L/DVB (4732): Fix spelling error in Kconfig help text for DVB_CORE_ATTACH
Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-14 00:44:00 -03:00
Michael Krufky 180958febf V4L/DVB (4731a): Kconfig: restore pvrusb2 menu items
Looks like the pvrusb2 menu items were accidentally removed in
git commit 1450e6bedc

This patch restores the menu items so that the pvrusb2 driver can be built.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-14 00:43:58 -03:00
Hans Verkuil e0abc8cd54 V4L/DVB (4729): Fix VIDIOC_G_FMT for NTSC in cx25840.
VIDIOC_G_FMT returned the sliced VBI types in the wrong lines for NTSC
(three lines too low).

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-14 00:43:55 -03:00