Граф коммитов

223568 Коммитов

Автор SHA1 Сообщение Дата
Avi Kivity e5c3014282 KVM: Initialize fpu state in preemptible context
init_fpu() (which is indirectly called by the fpu switching code) assumes
it is in process context.  Rather than makeing init_fpu() use an atomic
allocation, which can cause a task to be killed, make sure the fpu is
already initialized when we enter the run loop.

KVM-Stable-Tag.
Reported-and-tested-by: Kirill A. Shutemov <kas@openvz.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Reviewed-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 12:02:26 +02:00
Gleb Natapov 444e863d13 KVM: VMX: when entering real mode align segment base to 16 bytes
VMX checks that base is equal segment shifted 4 bits left. Otherwise
guest entry fails.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:31:20 +02:00
Xiao Guangrong f8e453b00c KVM: MMU: handle 'map_writable' in set_spte() function
Move the operation of 'writable' to set_spte() to clean up code

[avi: remove unneeded booleanification]

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:31:19 +02:00
Xiao Guangrong b034cf0105 KVM: MMU: audit: allow audit more guests at the same time
It only allows to audit one guest in the system since:
- 'audit_point' is a glob variable
- mmu_audit_disable() is called in kvm_mmu_destroy(), so audit is disabled
  after a guest exited

this patch fix those issues then allow to audit more guests at the same time

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:31:17 +02:00
Avi Kivity aff48baa34 KVM: Fetch guest cr3 from hardware on demand
Instead of syncing the guest cr3 every exit, which is expensince on vmx
with ept enabled, sync it only on demand.

[sheng: fix incorrect cr3 seen by Windows XP]

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:31:16 +02:00
Avi Kivity 9f8fe5043f KVM: Replace reads of vcpu->arch.cr3 by an accessor
This allows us to keep cr3 in the VMCS, later on.

Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:31:15 +02:00
Marcelo Tosatti e49146dce8 KVM: MMU: only write protect mappings at pagetable level
If a pagetable contains a writeable large spte, all of its sptes will be
write protected, including non-leaf ones, leading to endless pagefaults.

Do not write protect pages above PT_PAGE_TABLE_LEVEL, as the spte fault
paths assume non-leaf sptes are writable.

Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:31:13 +02:00
Avi Kivity 16d8f72f70 KVM: VMX: Correct asm constraint in vmcs_load()/vmcs_clear()
'error' is byte sized, so use a byte register constraint.

Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:31:12 +02:00
Avi Kivity c445f8ef43 KVM: MMU: Initialize base_role for tdp mmus
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:31:11 +02:00
Avi Kivity 110312c84b KVM: VMX: Optimize atomic EFER load
When NX is enabled on the host but not on the guest, we use the entry/exit
msr load facility, which is slow.  Optimize it to use entry/exit efer load,
which is ~1200 cycles faster.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:31:09 +02:00
Avi Kivity 07c116d2f5 KVM: VMX: Add definitions for more vm entry/exit control bits
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:31:08 +02:00
Andre Przywara dc25e89e07 KVM: SVM: copy instruction bytes from VMCB
In case of a nested page fault or an intercepted #PF newer SVM
implementations provide a copy of the faulting instruction bytes
in the VMCB.
Use these bytes to feed the instruction emulator and avoid the costly
guest instruction fetch in this case.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:31:07 +02:00
Andre Przywara df4f310856 KVM: SVM: implement enhanced INVLPG intercept
When the DecodeAssist feature is available, the linear address
is provided in the VMCB on INVLPG intercepts. Use it directly to
avoid any decoding and emulation.
This is only useful for shadow paging, though.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:31:05 +02:00
Andre Przywara cae3797a46 KVM: SVM: enhance mov DR intercept handler
Newer SVM implementations provide the GPR number in the VMCB, so
that the emulation path is no longer necesarry to handle debug
register access intercepts. Implement the handling in svm.c and
use it when the info is provided.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:31:04 +02:00
Andre Przywara 7ff76d58a9 KVM: SVM: enhance MOV CR intercept handler
Newer SVM implementations provide the GPR number in the VMCB, so
that the emulation path is no longer necesarry to handle CR
register access intercepts. Implement the handling in svm.c and
use it when the info is provided.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:31:03 +02:00
Andre Przywara ddce97aac5 KVM: SVM: add new SVM feature bit names
the recent APM Vol.2 and the recent AMD CPUID specification describe
new CPUID features bits for SVM. Name them here for later usage.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:31:02 +02:00
Andre Przywara 51d8b66199 KVM: cleanup emulate_instruction
emulate_instruction had many callers, but only one used all
parameters. One parameter was unused, another one is now
hidden by a wrapper function (required for a future addition
anyway), so most callers use now a shorter parameter list.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:31:00 +02:00
Andre Przywara db8fcefaa7 KVM: move complete_insn_gp() into x86.c
move the complete_insn_gp() helper function out of the VMX part
into the generic x86 part to make it usable by SVM.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:30:59 +02:00
Andre Przywara eea1cff9ab KVM: x86: fix CR8 handling
The handling of CR8 writes in KVM is currently somewhat cumbersome.
This patch makes it look like the other CR register handlers
and fixes a possible issue in VMX, where the RIP would be incremented
despite an injected #GP.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:30:58 +02:00
Avi Kivity a63512a4d7 KVM guest: Fix kvm clock initialization when it's configured out
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:30:56 +02:00
Takuya Yoshikawa 175504cdbf KVM: Take missing slots_lock for kvm_io_bus_unregister_dev()
In KVM_CREATE_IRQCHIP, kvm_io_bus_unregister_dev() is called without taking
slots_lock in the error handling path.

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:30:55 +02:00
Lai Jiangshan a355c85c5f KVM: return true when user space query KVM_CAP_USER_NMI extension
userspace may check this extension in runtime.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:30:54 +02:00
Avi Kivity 61cfab2e83 KVM: Correct kvm_pio tracepoint count field
Currently, we record '1' for count regardless of the real count.  Fix.

Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:30:52 +02:00
Avi Kivity d3c422bd33 KVM: MMU: Fix incorrect direct page write protection due to ro host page
If KVM sees a read-only host page, it will map it as read-only to prevent
breaking a COW.  However, if the page was part of a large guest page, KVM
incorrectly extends the write protection to the entire large page frame
instead of limiting it to the normal host page.

This results in the instantiation of a new shadow page with read-only access.

If this happens for a MOVS instruction that moves memory between two normal
pages, within a single large page frame, and mapped within the guest as a
large page, and if, in addition, the source operand is not writeable in the
host (perhaps due to KSM), then KVM will instantiate a read-only direct
shadow page, instantiate an spte for the source operand, then instantiate
a new read/write direct shadow page and instantiate an spte for the
destination operand.  Since these two sptes are in different shadow pages,
MOVS will never see them at the same time and the guest will not make
progress.

Fix by mapping the direct shadow page read/write, and only marking the
host page read-only.

Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:30:51 +02:00
Avi Kivity 5c663a1534 KVM: Fix build error on s390 due to missing tlbs_dirty
Make it available for all archs.

Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:30:50 +02:00
Joerg Roedel 81dd35d42c KVM: SVM: Add xsetbv intercept
This patch implements the xsetbv intercept to the AMD part
of KVM. This makes AVX usable in a save way for the guest on
AVX capable AMD hardware.

The patch is tested by using AVX in the guest and host in
parallel and checking for data corruption. I also used the
KVM xsave unit-tests and they all pass.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:30:49 +02:00
Takuya Yoshikawa d4dbf47009 KVM: MMU: Make the way of accessing lpage_info more generic
Large page information has two elements but one of them, write_count, alone
is accessed by a helper function.

This patch replaces this helper function with more generic one which returns
newly named kvm_lpage_info structure and use it to access the other element
rmap_pde.

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:30:47 +02:00
Anthony Liguori 443381a828 KVM: VMX: add module parameter to avoid trapping HLT instructions (v5)
In certain use-cases, we want to allocate guests fixed time slices where idle
guest cycles leave the machine idling.  There are many approaches to achieve
this but the most direct is to simply avoid trapping the HLT instruction which
lets the guest directly execute the instruction putting the processor to sleep.

Introduce this as a module-level option for kvm-vmx.ko since if you do this
for one guest, you probably want to do it for all.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:30:46 +02:00
Joerg Roedel 38e5e92fe8 KVM: SVM: Implement Flush-By-Asid feature
This patch adds the new flush-by-asid of upcoming AMD
processors to the KVM-AMD module.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:30:45 +02:00
Joerg Roedel f40f6a459c KVM: SVM: Use svm_flush_tlb instead of force_new_asid
This patch replaces all calls to force_new_asid which are
intended to flush the guest-tlb by the more appropriate
function svm_flush_tlb. As a side-effect the force_new_asid
function is removed.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:30:44 +02:00
Joerg Roedel fa22a8d608 KVM: SVM: Remove flush_guest_tlb function
This function is unused and there is svm_flush_tlb which
does the same. So this function can be removed.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:30:42 +02:00
Xiao Guangrong fb67e14fc9 KVM: MMU: retry #PF for softmmu
Retry #PF for softmmu only when the current vcpu has the same cr3 as the time
when #PF occurs

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:30:41 +02:00
Xiao Guangrong 2ec4739ddc KVM: MMU: fix accessed bit set on prefault path
Retry #PF is the speculative path, so don't set the accessed bit

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:30:40 +02:00
Xiao Guangrong 78b2c54aa4 KVM: MMU: rename 'no_apf' to 'prefault'
It's the speculative path if 'no_apf = 1' and we will specially handle this
speculative path in the later patch, so 'prefault' is better to fit the sense.

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:30:38 +02:00
Joerg Roedel b53ba3f9cc KVM: SVM: Add clean-bit for LBR state
This patch implements the clean-bit for all LBR related
state. This includes the debugctl, br_from, br_to,
last_excp_from, and last_excp_to msrs.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:30:37 +02:00
Joerg Roedel 0574dec0d7 KVM: SVM: Add clean-bit for CR2 register
This patch implements the clean-bit for the cr2 register in
the vmcb.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:30:36 +02:00
Joerg Roedel 060d0c9a2e KVM: SVM: Add clean-bit for Segements and CPL
This patch implements the clean-bit defined for the cs, ds,
ss, an es segemnts and the current cpl saved in the vmcb.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:30:34 +02:00
Joerg Roedel 17a703cb14 KVM: SVM: Add clean-bit for GDT and IDT
This patch implements the clean-bit for the base and limit
of the gdt and idt in the vmcb.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:30:33 +02:00
Joerg Roedel 72214b9601 KVM: SVM: Add clean-bit for DR6 and DR7
This patch implements the clean-bit for the dr6 and dr7
debug registers in the vmcb.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:30:31 +02:00
Joerg Roedel dcca1a6506 KVM: SVM: Add clean-bit for control registers
This patch implements the CRx clean-bit for the vmcb. This
bit covers cr0, cr3, cr4, and efer.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:30:30 +02:00
Joerg Roedel b2747166dc KVM: SVM: Add clean-bit for NPT state
This patch implements the clean-bit for all nested paging
related state in the vmcb.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:30:29 +02:00
Joerg Roedel decdbf6a4c KVM: SVM: Add clean-bit for interrupt state
This patch implements the clean-bit for all interrupt
related state in the vmcb. This corresponds to vmcb offset
0x60-0x67.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:30:28 +02:00
Joerg Roedel d48086d1e3 KVM: SVM: Add clean-bit for the ASID
This patch implements the clean-bit for the asid in the
vmcb.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:30:26 +02:00
Joerg Roedel f56838e4c3 KVM: SVM: Add clean-bit for IOPM_BASE and MSRPM_BASE
This patch adds the clean bit for the physical addresses of
the MSRPM and the IOPM. It does not need to be set in the
code because the only place where these values are changed
is the nested-svm vmrun and vmexit path. These functions
already mark the complete VMCB as dirty.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:30:25 +02:00
Joerg Roedel 116a0a2367 KVM: SVM: Add clean-bit for intercetps, tsc-offset and pause filter count
This patch adds the clean-bit for intercepts-vectors, the
TSC offset and the pause-filter count to the appropriate
places. The IO and MSR permission bitmaps are not subject to
this bit.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:30:24 +02:00
Roedel, Joerg 8d28fec406 KVM: SVM: Add clean-bits infrastructure code
This patch adds the infrastructure for the implementation of
the individual clean-bits.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:30:22 +02:00
Takuya Yoshikawa 700e1b1219 KVM: MMU: Avoid dropping accessed bit while removing write access
One more "KVM: MMU: Don't drop accessed bit while updating an spte."

Sptes are accessed by both kvm and hardware.
This patch uses update_spte() to fix the way of removing write access.

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:30:21 +02:00
Avi Kivity a295673aba KVM: VMX: Return 0 from a failed VMREAD
If we execute VMREAD during reboot we'll just skip over it.  Instead of
returning garbage, return 0, which has a much smaller chance of confusing
the code.  Otherwise we risk a flood of debug printk()s which block the
reboot process if a serial console or netconsole is enabled.

Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:30:20 +02:00
Avi Kivity b7c4145ba2 KVM: Don't spin on virt instruction faults during reboot
Since vmx blocks INIT signals, we disable virtualization extensions during
reboot.  This leads to virtualization instructions faulting; we trap these
faults and spin while the reboot continues.

Unfortunately spinning on a non-preemptible kernel may block a task that
reboot depends on; this causes the reboot to hang.

Fix by skipping over the instruction and hoping for the best.

Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:30:18 +02:00
Joerg Roedel 4cc703100b KVM: SVM: Use get_host_vmcb function in svm_get_msr for TSC
This patch replaces the open-coded vmcb-selection for the
TSC calculation with the new get_host_vmcb helper function
introduced in this patchset.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:30:17 +02:00