At boot on the BCM2711, if the HDMI controllers are running, the CRTC
driver will disable itself and its associated HDMI controller to work
around a hardware bug that would leave some pixels stuck in a FIFO.
In order to avoid that issue, we need to run some operations in lockstep
between the CRTC and HDMI controller, and we need to make sure the HDMI
controller will be powered properly.
However, since we haven't enabled it through KMS, the runtime_pm state
is off at this point so we need to make sure the device is powered
through pm_runtime_resume_and_get, and once the operations are complete,
we call pm_runtime_put.
However, the HDMI controller will do that itself in its
post_crtc_powerdown, which means we'll end up calling pm_runtime_put for
a single pm_runtime_get, throwing the reference counting off. Let's
remove the pm_runtime_put call in the CRTC code in order to have the
proper counting.
Fixes: bca10db67b ("drm/vc4: crtc: Make sure the HDMI controller is powered when disabling")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220203102003.1114673-1-maxime@cerno.tech
On bind we will register the HDMI codec device but we don't unregister
it on unbind, leading to a device leakage. Unregister our device at
unbind.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127111452.222002-1-maxime@cerno.tech
Sparse warns about the following cast in the function
falcon_copy_firmware_image() ...
drivers/gpu/drm/tegra/falcon.c:66:27: warning: cast to restricted __le32
Fix this by casting the firmware data array to __le32 instead of u32.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The new TegraDRM UAPI uses syncpoint waiting with timeout set to
zero to indicate reading the syncpoint value. To support that we
need to return the syncpoint value always when waiting.
Fixes: 44e9613813 ("drm/tegra: Implement syncpoint wait UAPI")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The iMac 12,1 does not use the gmux driver for backlight, so the radeon
backlight device is needed to set the brightness.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1838
Signed-off-by: Nicholas Bishop <nicholasbishop@google.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
the 2nd parameter should be smu msg type rather than asic msg index.
Fixes: 7d38d9dc4e ("drm/amdgpu: add mode2 reset support for yellow carp")
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
SDMA ring buffer test failed if suspend is aborted during
S0i3 resume.
[How]
If suspend is aborted for some reason during S0i3 resume
cycle, it follows SDMA ring test failing and errors in amdgpu
resume. For RN/CZN/Picasso, SMU saves and restores SDMA
registers during S0ix cycle. So, skipping SDMA suspend and
resume from driver solves the issue. This time, the system
is able to resume gracefully even the suspend is aborted.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rajib Mahapatra <rajib.mahapatra@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Correct the UMD pstate profiling clocks for Dimgrey Cavefish and Beige
Goby.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We lost the required >>16 when I refactored the FBC plane state
checks. Bring it back so the check does what it's supposed to.
Cc: Mika Kahola <mika.kahola@intel.com>
Fixes: 2e6c99f886 ("drm/i915/fbc: Nuke lots of crap from intel_fbc_state_cache")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220210103107.24492-1-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
(cherry picked from commit f7bc440bc7)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
The mapping from enum port to whatever port numbering scheme is used by
the SWSCI Display Power State Notification is odd, and the memory of it
has faded. In any case, the parameter only has space for ports numbered
[0..4], and UBSAN reports bit shift beyond it when the platform has port
F or more.
Since the SWSCI functionality is supposed to be obsolete for new
platforms (i.e. ones that might have port F or more), just bail out
early if the mapped and mangled port number is beyond what the Display
Power State Notification can support.
Fixes: 9c4b0a6831 ("drm/i915: add opregion function to notify bios of encoder enable/disable")
Cc: <stable@vger.kernel.org> # v3.13+
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4800
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cc363f42d6b5a5932b6d218fefcc8bdfb15dbbe5.1644489329.git.jani.nikula@intel.com
(cherry picked from commit 24a644ebbf)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
For some reason we are selecting PRIO_HAS_PAGES when we don't have
mm.pages, and vice versa.
v2(Thomas):
- Add missing fixes tag
Fixes: 213d509277 ("drm/i915/ttm: Introduce a TTM i915 gem object backend")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209111652.468762-1-matthew.auld@intel.com
(cherry picked from commit ba2c5d1502)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Apparently I totally fumbled the loop condition when I
removed the ARRAY_SIZE() stuff from the dbuf slice config
lookup. Comparing the loop index with the active_pipes bitmask
is utter nonsense, what we want to do is check to see if the
mask is zero or not.
Note that the code actually ended up working correctly despite
the fumble, up until commit eef1739544 ("drm/i915: Allow
!join_mbus cases for adlp+ dbuf configuration") when things
broke for real.
Cc: stable@vger.kernel.org
Fixes: 05e8155afe ("drm/i915: Use a sentinel to terminate the dbuf slice arrays")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220207132700.481-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit a28fde308c)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Here are a small number of char/misc driver fixes for 5.17-rc4 for
reported issues. They contain:
- phy driver fixes
- iio driver fix
- eeprom driver fix
- speakup regression fix
- fastrpc fix
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYgeJoA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yngawCfRWNh5Z6SkxTywmnqQfCjRXYu0M4AoKGGADze
XGOFQL9ZIy1HAGNHZ16e
=yzGK
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a small number of char/misc driver fixes for 5.17-rc4 for
reported issues. They contain:
- phy driver fixes
- iio driver fix
- eeprom driver fix
- speakup regression fix
- fastrpc fix
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
iio: buffer: Fix file related error handling in IIO_BUFFER_GET_FD_IOCTL
speakup-dectlk: Restore pitch setting
bus: mhi: pci_generic: Add mru_default for Cinterion MV31-W
bus: mhi: pci_generic: Add mru_default for Foxconn SDX55
eeprom: ee1004: limit i2c reads to I2C_SMBUS_BLOCK_MAX
misc: fastrpc: avoid double fput() on failed usercopy
phy: dphy: Correct clk_pre parameter
phy: phy-mtk-tphy: Fix duplicated argument in phy-mtk-tphy
phy: stm32: fix a refcount leak in stm32_usbphyc_pll_enable()
phy: xilinx: zynqmp: Fix bus width setting for SGMII
phy: cadence: Sierra: fix error handling bugs in probe()
phy: ti: Fix missing sentinel for clk_div_table
phy: broadcom: Kconfig: Fix PHY_BRCM_USB config option
phy: usb: Leave some clocks running during suspend
drm_gem_cma_mmap() cannot assume every implementation of dma_mmap_wc()
will end up calling remap_pfn_range() (which happens to set the relevant
vma flag, among others), so in order to make sure expectations around
VM_DONTEXPAND are met, let it explicitly set the flag like most other
GEM mmap implementations do.
This avoids repeated warnings on a small minority of systems where the
display is behind an IOMMU, and has a simple driver which does not
override drm_gem_cma_default_funcs. Arm hdlcd is an in-tree affected
driver. Out-of-tree, the Apple DCP driver is affected; this fix is
required for DCP to be mainlined.
[Alyssa: Update commit message.]
Fixes: c40069cb7b ("drm: add mmap() to drm_gem_object_funcs")
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013143654.39031-1-alyssa@rosenzweig.io
it will cause hwmon node of power1_label is not created.
v2:
the hwmon node of "power1_label" is always needed for all ASICs.
and the patch will remove ASIC type check for "power1_label".
Fixes: ae07970a06 ("drm/amd/pm: add support for hwmon control of slow and fast PPT limit on vangogh")
Signed-off-by: Yang Wang <KevinYang.Wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Even if can_apply_edp_fast_boot is set to 1 at boot, this flag will
be cleared to 0 at S3 resume.
[How]
Keep eDP Vdd on when eDP stream is already enabled.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Zhan Liu <Zhan.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix clamping to match register field size
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
pflip interrupt order are mapped 1 to 1 to otg id.
e.g. if irq_src=26 corresponds to otg0 then 27->otg1, 28->otg2...
Linux DM registers pflip interrupts per number of crtcs.
In fused pipe case crtc numbers can be less than otg id.
e.g. if one pipe out of 3(otg#0-2) is fused adev->mode_info.num_crtc=2
so DM only registers irq_src 26,27.
This is a bug since if pipe#2 remains unfused DM never gets
otg2 pflip interrupt (irq_src=28)
That may results in gfx failure due to pflip timeout.
[How]
Register pflip interrupts per max num of otg instead of num_crtc
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Confirmed with hardware team, there is harvesting for gc 10.3.1.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A number of BIOS versions have a problem with the watermarks table not
being configured properly. This manifests as a very scary looking warning
during resume from s0i3. This should be harmless in most cases and is well
understood, so decrease the assertion to a clearer warning about the problem.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DRM bridge drivers are now attaching their DSI device at probe time,
which requires us to register our DSI host in order to let the bridge
to probe: this recently started producing an endless -EPROBE_DEFER
loop on some machines that are using external bridges, like the
parade-ps8640, found on the ACER Chromebook R13.
Now that the DSI hosts/devices probe sequence is documented, we can
do adjustments to the mtk_dsi driver as to both fix now and make sure
to avoid this situation in the future: for this, following what is
documented in drm_bridge.c, move the mtk_dsi component_add() to the
mtk_dsi_ops.attach callback and delete it in the detach callback;
keeping in mind that we are registering a drm_bridge for our DSI,
which is only used/attached if the DSI Host is bound, it wouldn't
make sense to keep adding our bridge at probe time (as it would
be useless to have it if mtk_dsi_ops.attach() fails!), so also move
that one to the dsi host attach function (and remove it in detach).
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Commit 7707f7227f ("drm/rockchip: Add support for afbc") switched up
the rk3399_vop_big[] register windows, but it did so incorrectly.
The biggest problem is in rk3288_win23_data[] vs.
rk3368_win23_data[] .format field:
RK3288's format: VOP_REG(RK3288_WIN2_CTRL0, 0x7, 1)
RK3368's format: VOP_REG(RK3368_WIN2_CTRL0, 0x3, 5)
Bits 5:6 (i.e., shift 5, mask 0x3) are correct for RK3399, according to
the TRM.
There are a few other small differences between the 3288 and 3368
definitions that were swapped in commit 7707f7227f. I reviewed them to
the best of my ability according to the RK3399 TRM and fixed them up.
This fixes IOMMU issues (and display errors) when testing with BG24
color formats.
Fixes: 7707f7227f ("drm/rockchip: Add support for afbc")
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Tested-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220119161104.1.I1d01436bef35165a8cdfe9308789c0badb5ff46a@changeid
The driver returns an error when devm_phy_optional_get() fails leaving
the previously enabled clock turned on. Change order and enable the
clock only after the phy has been acquired.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220126145549.617165-3-s.hauer@pengutronix.de
On TGL/RKL the BIOS likes to use some kind of bogus DBUF layout
that doesn't match what the spec recommends. With a single active
pipe that is not going to be a problem, but with multiple pipes
active skl_commit_modeset_enables() goes into an infinite loop
since it can't figure out any order in which it can commit the
pipes without causing DBUF overlaps between the planes.
We'd need some kind of extra DBUF defrag stage in between to
make the transition possible. But that is clearly way too complex
a solution, so in the name of simplicity let's just sanitize the
DBUF state by simply turning off all planes when we detect a
pipe encroaching on its neighbours' DBUF slices. We only have
to disable the primary planes as all other planes should have
already been disabled (if they somehow were enabled) by
earlier sanitization steps.
And for good measure let's also sanitize in case the DBUF
allocations of the pipes already seem to overlap each other.
Cc: <stable@vger.kernel.org> # v5.14+
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4762
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204141818.1900-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit 15512021eb)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
During readout we cannot assume the planes are actually using the
slices they are supposed to use. The BIOS may have misprogrammed
things and put the planes onto the wrong dbuf slices. So let's
do the readout more carefully to make sure we really know which
dbuf slices are actually in use by the pipe at the time.
Cc: <stable@vger.kernel.org> # v5.14+
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204141818.1900-2-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit b3dcc6dc0f)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reintroduce the !join_mbus single pipe cases for adlp+.
Due to the mbus relative dbuf offsets in PLANE_BUF_CFG we
need to know the actual slices used by the pipe when doing
readout, even when mbus joining isn't enabled. Accurate
readout will be needed to properly sanitize invalid BIOS
dbuf configurations.
This will also make it much easier to play around with the
!join_mbus configs for testin/workaround purposes.
Cc: <stable@vger.kernel.org> # v5.14+
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204141818.1900-1-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit eef1739544)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Architectures others than x86 have a stub implementation calling
WARN_ON_ONCE(). The appropriate headers need to be included, otherwise
the header-test target will fail with:
HDRTEST drivers/gpu/drm/i915/i915_mm.h
In file included from <command-line>:
./drivers/gpu/drm/i915/i915_mm.h: In function ‘remap_io_mapping’:
./drivers/gpu/drm/i915/i915_mm.h:26:2: error: implicit declaration of function ‘WARN_ON_ONCE’ [-Werror=implicit-function-declaration]
26 | WARN_ON_ONCE(1);
| ^~~~~~~~~~~~
v2: Do not include <linux/printk.h> since call to pr_err() has been
removed
Fixes: 67c430bbaa ("drm/i915: Skip remap_io_mapping() for non-x86 platforms")
Cc: Siva Mullati <siva.mullati@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Siva Mullati <siva.mullati@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220131165926.3230642-3-lucas.demarchi@intel.com
(cherry picked from commit 377c675f3c)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
The i915_ttm_accel_move() function may return error codes that should
be propagated further up the stack rather than consumed assuming that
the accel move failed and could be replaced with a memcpy move.
For -EINTR, -ERESTARTSYS and -EAGAIN, just propagate those codes, rather
than retrying with a memcpy move.
Fixes: 2b0a750caf ("drm/i915/ttm: Failsafe migration blits")
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220201070340.16457-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit 29b9702ffe)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Currently we allow DRRS on IVB PCH ports, but we're missing a
few programming steps meaning it is guaranteed to not work.
And on HSW DRRS is not supported on anything but port A ever
as only transcoder EDP has the M2/N2 registers (though I'm
not sure if HSW ever has eDP on any other port).
Starting from BDW all transcoders have the dynamically
reprogrammable M/N registers so DRRS could work on any
port.
Stop initializing DRRS on ports where it cannot possibly work.
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-11-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit f0d4ce59f4)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
We call __save_depot_stack() unconditionally so the stack depot
must always be initialized or else we'll oops on platforms without
runtime pm support.
Presumably we've not seen this in CI due to stack_depot_init()
already getting called via drm_mm_init()+CONFIG_DRM_DEBUG_MM.
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com> # stackdepot
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Fixes: 2dba5eb1c7 ("lib/stackdepot: allow optional init and stack_table allocation by kvmalloc()")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220126081539.23227-1-ville.syrjala@linux.intel.com
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit 751a9d69b1)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
In the function panel_simple_probe() the pointer panel->desc is
assigned to the passed pointer desc. If function panel_dpi_probe()
is called panel->desc will be updated, but further on only desc
will be evaluated. So update the desc pointer to be able to use
the data from the function panel_dpi_probe().
Fixes: 4a1d0dbc83 ("drm/panel: simple: add panel-dpi support")
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
To: dri-devel@lists.freedesktop.org
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220201110153.3479-1-cniedermaier@dh-electronics.com
Fix GitLab issue #4698: DP monitor through Type-C dock(Dell DA310) doesn't work.
Fixes for inconsistent engine busyness value and read timeout with GuC.
Fix to use ALLOW_FAIL for error capture buffer allocation. Don't use
interruptible lock on error path. Smatch fix to reject zero sized overlays.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YfuiG8SKMKP5V/Dm@jlahtine-mobl.ger.corp.intel.com
The 2711 pixel valve can't produce odd horizontal timings, and
checks were added to vc4_hdmi_encoder_atomic_check and
vc4_hdmi_encoder_mode_valid to filter out/block selection of
such modes.
Modes with DRM_MODE_FLAG_DBLCLK double all the horizontal timing
values before programming them into the PV. The PV values,
therefore, can not be odd, and so the modes can be supported.
Amend the filtering appropriately.
Fixes: 57fb32e632 ("drm/vc4: hdmi: Block odd horizontal timings")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127135116.298278-1-maxime@cerno.tech
The code that set the scdc_enabled flag to ensure it was
disabled at boot time also ran on Pi0-3 where there is no
SCDC support. This lead to a warning in vc4_hdmi_encoder_post_crtc_disable
due to vc4_hdmi_disable_scrambling being called and trying to
read (and write) register HDMI_SCRAMBLER_CTL which doesn't
exist on those platforms.
Only set the flag should the interface be configured to support
more than HDMI 1.4.
Fixes: 1998646129 ("drm/vc4: hdmi: Introduce a scdc_enabled flag")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127134559.292778-1-maxime@cerno.tech
The existing logic was flawed in that it could try reading the
2711 specific registers for HPD on a CM1/3 where the HPD GPIO
hadn't been defined in DT.
Ensure we don't do the 2711 register read on invalid hardware,
and then
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127131754.236074-1-maxime@cerno.tech
We probably never trigger this, but the logic inside the check is
inverted.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dGPUs connected to Intel systems configured for suspend to idle
will not have the power rails cut at suspend and resetting the GPU
may lead to problematic behaviors.
Fixes: e25443d276 ("drm/amdgpu: add a dev_pm_ops prepare callback (v2)")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1879
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The eDP link rate reported by the DP_MAX_LINK_RATE dpcd register (0xa) is
contradictory to the highest rate supported reported by
EDID (0xc = LINK_RATE_RBR2). The effects of this compounded with commit
'4a8ca46bae8a ("drm/amd/display: Default max bpc to 16 for eDP")' results
in no display modes being found and a dark panel.
For now, simply force the maximum supported link rate for the eDP attached
2018 15" Apple Retina panels.
Additionally, we must also check the firmware revision since the device ID
reported by the DPCD is identical to that of the more capable 16,1,
incorrectly quirking it. We also use said firmware check to quirk the
refreshed 15,1 models with Vega graphics as they use a slightly newer
firmware version.
Tested-by: Aun-Ali Zaidi <admin@kodeit.net>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Aun-Ali Zaidi <admin@kodeit.net>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
This change causes regression, that prevents some systems
from lighting up internal displays.
[How]
Revert this patch until a new solution is ready.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Zhan Liu <Zhan.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
The original latencies were causing underflow in some modes.
Resolution: 2880x1620@60p when HDR enable
[How]
1. Replace with the up-to-date watermark values based on new measurments
2. Correct the ddr_wm_table name to DDR5 on DCN31
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
There is underflow / visual corruption DCN301, for high
bandwidth MST DSC configurations such as 2x1440p144 or 2x4k60.
[How]
Use up-to-date watermark values for DCN301.
Reviewed-by: Zhan Liu <zhan.liu@amd.com>
Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
We observed a GPU hang when querying GMC CG state(i.e.,
cat amdgpu_pm_info) on cyan skillfish. Acctually, cyan
skillfish doesn't support any CG features.
Just prevent it from accessing GMC CG registers.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This will cause misconfigured systems to not run the GPU suspend
routines.
* In APUs that are properly configured system will go into s2idle.
* In APUs that are intended to be S3 but user selects
s2idle the GPU will stay fully powered for the suspend.
* In APUs that are intended to be s2idle and system misconfigured
the GPU will stay fully powered for the suspend.
* In systems that are intended to be s2idle, but AMD dGPU is also
present, the dGPU will go through S3
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will be used to help make decisions on what to do in
misconfigured systems.
v2: squash in semicolon fix from Stephen Rothwell
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The D-PHY specification (v1.2) explicitly mentions that the T-CLK-PRE
parameter's unit is Unit Interval(UI) and the minimum value is 8. Also,
kernel doc of the 'clk_pre' member of struct phy_configure_opts_mipi_dphy
mentions that it should be in UI. However, the dphy core driver wrongly
sets 'clk_pre' to 8000, which seems to hint that it's in picoseconds.
So, let's fix the dphy core driver to correctly reflect the T-CLK-PRE
parameter's minimum value according to the D-PHY specification.
I'm assuming that all impacted custom drivers shall program values in
TxByteClkHS cycles into hardware for the T-CLK-PRE parameter. The D-PHY
specification mentions that the frequency of TxByteClkHS is exactly 1/8
the High-Speed(HS) bit rate(each HS bit consumes one UI). So, relevant
custom driver code is changed to program those values as
DIV_ROUND_UP(cfg->clk_pre, BITS_PER_BYTE), then.
Note that I've only tested the patch with RM67191 DSI panel on i.MX8mq EVK.
Help is needed to test with other i.MX8mq, Meson and Rockchip platforms,
as I don't have the hardwares.
Fixes: 2ed869990e ("phy: Add MIPI D-PHY configuration options")
Tested-by: Liu Ying <victor.liu@nxp.com> # RM67191 DSI panel on i.MX8mq EVK
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> # for phy-meson-axg-mipi-dphy.c
Tested-by: Neil Armstrong <narmstrong@baylibre.com> # for phy-meson-axg-mipi-dphy.c
Tested-by: Guido Günther <agx@sigxcpu.org> # Librem 5 (imx8mq) with it's rather picky panel
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20220124024007.1465018-1-victor.liu@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
GuC updates shared memory and KMD reads it. Since this is not
synchronized, we run into a race where the value read is inconsistent.
Sometimes the inconsistency is in reading the upper MSB bytes of the
last_switch_in value. 2 types of cases are seen - upper 8 bits are zero
and upper 24 bits are zero. Since these are non-zero values, it is
not trivial to determine validity of these values. Instead we read the
values multiple times until they are consistent. In test runs, 3
attempts results in consistent values. The upper bound is set to 6
attempts and may need to be tuned as per any new occurences.
Since the duration that gt is parked can vary, the patch also updates
the gt timestamp on unpark before starting the worker.
v2:
- Initialize i
- Use READ_ONCE to access engine record
Fixes: 77cdd054dd ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220125020124.788679-2-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 512712a824)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
On some OEM setups users can configure the BIOS for S3 or S2idle.
When configured to S3 users can still choose 's2idle' in the kernel by
using `/sys/power/mem_sleep`. Before commit 6dc8265f98 ("drm/amdgpu:
always reset the asic in suspend (v2)"), the GPU would crash. Now when
configured this way, the system should resume but will use more power.
As such, adjust the `amdpu_acpi_is_s0ix function` to warn users about
potential power consumption issues during their first attempt at
suspending.
Reported-by: Bjoren Dasse <bjoern.daase@gmail.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1824
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The existing way cannot handle Beige Goby well as a different
PPTable data structure(PPTable_beige_goby_t instead of PPTable_t)
is used there.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Bounds checking when parsing init scripts embedded in the BIOS reject
access to the last byte. This causes driver initialization to fail on
Apple eMac's with GeForce 2 MX GPUs, leaving the system with no working
console.
This is probably only seen on OpenFirmware machines like PowerPC Macs
because the BIOS image provided by OF is only the used parts of the ROM,
not a power-of-two blocks read from PCI directly so PCs always have
empty bytes at the end that are never accessed.
Signed-off-by: Nick Lopez <github@glowingmonkey.org>
Fixes: 4d4e9907ff ("drm/nouveau/bios: guard against out-of-bounds accesses to image")
Cc: <stable@vger.kernel.org> # v4.10+
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220122081906.2633061-1-github@glowingmonkey.org
The TCSS_DDI_STATUS register is indexed by tc_port not by the FIA port
index, fix this up. This only caused an issue on TC#3/4 ports in legacy
mode, as in all other cases the two indices either match (on TC#1/2) or
the TCSS_DDI_STATUS_READY flag is set regardless of something being
connected or not (on TC#1/2/3/4 in dp-alt and tbt-alt modes).
Reported-and-tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Fixes: 55ce306c2a ("drm/i915/adl_p: Implement TC sequences")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4698
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: <stable@vger.kernel.org> # v5.14+
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220126104356.2022975-1-imre.deak@intel.com
(cherry picked from commit 516b33460c)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
All timestamps returned by GuC for GuC PMU busyness are captured from
GUC PM TIMESTAMP. Since this timestamp does not tick when GuC goes idle,
kmd uses RING_TIMESTAMP to measure busyness of an engine with an active
context. In further stress testing, the MMIO read of the RING_TIMESTAMP
is seen to cause a rare hang. Resolve the issue by using gt specific
timestamp from PM which is in sync with the GuC PM timestamp.
Fixes: 77cdd054dd ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220111015523.225562-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 721fd84ea1)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Smatch detected a divide by zero bug in check_overlay_scaling().
drivers/gpu/drm/i915/display/intel_overlay.c:976 check_overlay_scaling()
error: potential divide by zero bug '/ rec->dst_height'.
drivers/gpu/drm/i915/display/intel_overlay.c:980 check_overlay_scaling()
error: potential divide by zero bug '/ rec->dst_width'.
Prevent this by ensuring that the dst height and width are non-zero.
Fixes: 02e792fbaa ("drm/i915: implement drmmode overlay support v4")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220124122409.GA31673@kili
(cherry picked from commit cf5b64f7f1)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Don't use the interruptable version of the timeline mutex lock in the
error path of eb_pin_timeline as the cleanup must always happen.
v2:
(John Harrison)
- Don't check for interrupt during mutex lock
v3:
(Tvrtko)
- A comment explaining why lock helper isn't used
Fixes: 544460c338 ("drm/i915: Multi-BB execbuf")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220111163929.14017-1-matthew.brost@intel.com
(cherry picked from commit cb935c4618)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Allocate intel_engine_coredump_alloc with ALLOW_FAIL rather than
GFP_KERNEL to fully decouple the error capture from fence signalling.
v2:
(John Harrison)
- Fix typo in commit message (s/do/to)
Fixes: 8b91cdd4f8 ("drm/i915: Use __GFP_KSWAPD_RECLAIM in the capture code")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220121043118.24886-2-matthew.brost@intel.com
(cherry picked from commit 4f72fc3c7f)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Tegra186+ hangs if host1x hardware is disabled at a kernel boot time
because we touch hardware before runtime PM is resumed. Move sync point
assignment initialization to the RPM-resume callback. Older SoCs were
unaffected because they skip that sync point initialization.
Tested-by: Jon Hunter <jonathanh@nvidia.com> # T186
Reported-by: Jon Hunter <jonathanh@nvidia.com> # T186
Fixes: 6b6776e2ab ("gpu: host1x: Add initial runtime PM and OPP support")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
A failing usercopy of the fence_rep object will lead to a stale entry in
the file descriptor table as put_unused_fd() won't release it. This
enables userland to refer to a dangling 'file' object through that still
valid file descriptor, leading to all kinds of use-after-free
exploitation scenarios.
Fix this by deferring the call to fd_install() until after the usercopy
has succeeded.
Fixes: c906965dee ("drm/vmwgfx: Add export fence to file descriptor support")
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
when acpi=off is provided in bootarg, kernel crash with
[ 1.252739] BUG: kernel NULL pointer dereference, address: 0000000000000018
[ 1.258308] Call Trace:
[ 1.258490] ? acpi_walk_namespace+0x147/0x147
[ 1.258770] acpi_get_devices+0xe4/0x137
[ 1.258921] ? drm_core_init+0xc0/0xc0 [drm]
[ 1.259108] detect_thinkpad_privacy_screen+0x5e/0xa8 [drm]
[ 1.259337] drm_privacy_screen_lookup_init+0xe/0xe85 [drm]
The reason is that acpi_walk_namespace expects acpi related stuff
initialized but in fact it wouldn't when acpi is set to off. In this case
we should honor acpi=off in detect_thinkpad_privacy_screen().
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220123091004.763775-1-ztong0001@gmail.com
Unused. Convert the divisions into asserts on the divisor, to
debug why it is zero. The divide by zero is suspected of causing
kernel panics.
While I have no idea where the zero is coming from I think this
patch is a positive either way.
Cc: stable@vger.kernel.org
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mirrors the logic for dcn30. Cue lots of WARNs and some
kernel panics without this fix.
Cc: stable@vger.kernel.org
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It calls populate_dml_pipes which uses doubles to initialize the
scale_ratio_depth params. Mirrors the dcn20 logic.
Cc: stable@vger.kernel.org
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In calculate_bandwidth(), the tag free_sclk and free_yclk are reversed,
which could lead to a memory leak of yclk.
Fix this bug by changing the location of free_sclk and free_yclk.
This bug was found by a static analyzer.
Builds with 'make allyesconfig' show no new warnings,
and our static analyzer no longer warns about this code.
Fixes: 2be8989d0f ("drm/amd/display/dc/calcs/dce_calcs: Move some large variables from the stack to the heap")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some architectures (e.g., ARM) throw an compilation error if the
udelay is too long. In general udelays of longer than 2000us are
not recommended on any architecture. Switch to msleep in these
cases.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some architectures (e.g., ARM) have relatively low udelay limits.
On most architectures, anything longer than 2000us is not recommended.
Change the check to align with other similar checks in DC.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Older radeon boards (r2xx-r5xx) had secondary PCI functions
which we solely there for supporting multi-head on OSs with
special requirements. Add them to the unsupported list
as well so we don't attempt to bind to them. The driver
would fail to bind to them anyway, but this does so
in a cleaner way that should not confuse the user.
Cc: stable@vger.kernel.org
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
FIFO reset is only necessary for fast boot sequence, where otg is disabled
and dig fe is enabled when changing dispclk. Fast boot is only enabled
on embedded displays.
[How]
Change FIFO reset condition to "embedded display only".
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCN301 has seamless boot enabled. With MPC split enabled
at the same time, system will hang.
[How]
Revert MPC split policy back to "MPC_SPLIT_AVOID". Since we have
ODM combine enabled on DCN301, pipe split is not necessary here.
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During otg sync trigger, plane states are used to decide whether the otg
is already synchronized or not. There are scenarions when otgs are
disabled without plane state getting disabled and in such case the otg is
excluded from synchronization.
[How]
Introduced pipe_idx_syncd in pipe_ctx that tracks each otgs master pipe.
When a otg is disabled/enabled, pipe_idx_syncd is reset to itself.
On sync trigger, pipe_idx_syncd is checked to decide whether a otg is
already synchronized and the otg is further included or excluded from
synchronization.
v2:
Don't drop is_blanked logic
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Mustapha Ghaddar <mustapha.ghaddar@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: meenakshikumar somasundaram <meenakshikumar.somasundaram@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: torvalds@linux-foundation.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to flush TLBs before releasing backing store otherwise userspace
is able to encounter stale entries if a) it is not declaring access to
certain buffers and b) it races with the backing store release from a
such undeclared execution already executing on the GPU in parallel.
The approach taken is to mark any buffer objects which were ever bound
to the GPU and to trigger a serialized TLB flush when their backing
store is released.
Alternatively the flushing could be done on VMA unbind, at which point
we would be able to ascertain whether there is potential a parallel GPU
execution (which could race), but essentially it boils down to paying
the cost of TLB flushes potentially needlessly at VMA unbind time (when
the backing store is not known to be going away so not needed for
safety), versus potentially needlessly at backing store relase time
(since we at that point cannot tell whether there is anything executing
on the GPU which uses that object).
Thereforce simplicity of implementation has been chosen for now with
scope to benchmark and refine later as required.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reported-by: Sushma Venkatesh Reddy <sushma.venkatesh.reddy@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While all userspace tried to limit commandstreams to 64K in size,
a bug in the Mesa driver lead to command streams of up to 128K
being submitted. Allow those to avoid breaking existing userspace.
Fixes: 6dfa2fab8d ("drm/etnaviv: limit submit sizes")
Cc: stable@vger.kernel.org
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
With system suspend using pm_runtime_force_suspend() we can't rely on
the pm_runtime_get_if_in_use() trick to deal with devfreq callbacks
after (or racing with) suspend. So flush any pending idle or boost
work in the suspend path.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220108180913.814448-3-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
System suspend uses pm_runtime_force_suspend(), which cheekily bypasses
the runpm reference counts. This doesn't actually work so well when the
GPU is active. So add a reasonable delay waiting for the GPU to become
idle.
Alternatively we could just return -EBUSY in this case, but that has the
disadvantage of causing system suspend to fail.
v2: s/ret/remaining [sboyd], and switch to using active_submits count
to ensure we aren't racing with submit cleanup (and devfreq idle
work getting scheduled, etc)
v3: fix inverted logic
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220108180913.814448-2-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
In case of a modeset where a mode gets split across multiple CRTCs
in the driver specific implementation (bigjoiner in i915) we wrongly count
the affected CRTCs based on the drm_crtc_mask and indicate the stolen CRTC as
an affected CRTC in atomic_check_only().
This triggers a warning since affected CRTCs doent match requested CRTC.
To fix this in such bigjoiner configurations, we should only
increment affected crtcs if that CRTC is enabled in UAPI not
if it is just used internally in the driver to split the mode.
v3: Add the same uapi crtc_state->enable check in requested
crtc calc (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.11+
Fixes: 919c2299a8 ("drm/i915: Enable bigjoiner")
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211004115913.23889-1-manasi.d.navare@intel.com
The function performs a check on the "phy" input parameter, however, it
is used before the check.
Initialize the "dev" variable after the sanity check to avoid a possible
NULL pointer dereference.
Fixes: 5c82902844 ("drm/msm/dsi: Split PHY drivers to separate files")
Addresses-Coverity-ID: 1493860 ("Null pointer dereference")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220116181844.7400-1-jose.exposito89@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The function performs a check on the "ctx" input parameter, however, it
is used before the check.
Initialize the "base" variable after the sanity check to avoid a
possible NULL pointer dereference.
Fixes: 4259ff7ae5 ("drm/msm/dpu: add support for pcc color block in dpu driver")
Addresses-Coverity-ID: 1493866 ("Null pointer dereference")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20220109192431.135949-1-jose.exposito89@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Dave Airlie
Maxime Ripard
Jon Hunter
Mikko Perttunen
Ville Syrjälä
Nicholas Bishop
Yifan Zhang
Rajib Mahapatra
Evan Quan
Jani Nikula
Matthew Auld
Tvrtko Ursulin
Linus Torvalds
Robin Murphy
Alex Deucher
Yang Wang
Zhan Liu
Dmytro Laktyushkin
Roman Li
Aaron Liu
Mario Limonciello
AngeloGioacchino Del Regno
Brian Norris
Sascha Hauer
Hans de Goede
Lucas De Marchi
Thomas Hellström
Christoph Niedermaier
Greg Kroah-Hartman
Dave Stevenson
Alexander Stein
Christian König
Aun-Ali Zaidi
Paul Hsieh
Agustin Gutierrez
Lang Yu
Liu Ying
Umesh Nerlige Ramappa
Nick Lopez
Imre Deak
Dan Carpenter
Matthew Brost
Anitha Chrisanthus
Dmitry Osipenko
Mathias Krause
Tong Zhang
Thomas Zimmermann
Bas Nieuwenhuizen
Zhou Qingyang
Meenakshikumar Somasundaram
Lucas Stach
Rob Clark
Manasi Navare
José Expósito
Xianting Tian