Граф коммитов

249 Коммитов

Автор SHA1 Сообщение Дата
Richard Guy Briggs 8626877b52 audit: fix location of __net_initdata for audit_net_ops
Fixup caught by checkpatch.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-17 17:14:32 -05:00
Eric Paris 4f066328ab audit: remove pr_info for every network namespace
A message about creating the audit socket might be fine at startup, but
a pr_info for every single network namespace created on a system isn't
useful.

Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-17 17:04:38 -05:00
Joe Perches 3e1d0bb622 audit: Convert int limit uses to u32
The equivalent uapi struct uses __u32 so make the kernel
uses u32 too.

This can prevent some oddities where the limit is
logged/emitted as a negative value.

Convert kstrtol to kstrtouint to disallow negative values.

Signed-off-by: Joe Perches <joe@perches.com>
[eparis: do not remove static from audit_default declaration]
2014-01-14 14:54:00 -05:00
Joe Perches d957f7b726 audit: Use more current logging style
Add pr_fmt to prefix "audit: " to output
Convert printk(KERN_<LEVEL> to pr_<level>
Coalesce formats
Use pr_cont
Move a brace after switch

Signed-off-by: Joe Perches <joe@perches.com>
2014-01-14 14:53:54 -05:00
Joe Perches b8dbc3241f audit: Use hex_byte_pack_upper
Using the generic kernel function causes the
object size to increase with gcc 4.8.1.

$ size kernel/audit.o*
   text	   data	    bss	    dec	    hex	filename
  18577	   6079	   8436	  33092	   8144	kernel/audit.o.new
  18579	   6015	   8420	  33014	   80f6	kernel/audit.o.old

Unsigned...
2014-01-14 14:53:50 -05:00
Eric Paris 1ce319f11c audit: reorder AUDIT_TTY_SET arguments
An admin is likely to want to see old and new values next to each other.
Putting all of the old values followed by all of the new values is just
hard to read as a human.

Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:33:41 -05:00
Eric Paris 0e23baccaa audit: rework AUDIT_TTY_SET to only grab spin_lock once
We can simplify the AUDIT_TTY_SET code to only grab the spin_lock one
time.  We need to determine if the new values are valid and if so, set
the new values at the same time we grab the old onces.  While we are
here get rid of 'res' and just use err.

Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:33:41 -05:00
Eric Paris 3f0c5fad89 audit: remove needless switch in AUDIT_SET
If userspace specified that it was setting values via the mask we do not
need a second check to see if they also set the version field high
enough to understand those values.  (clearly if they set the mask they
knew those values).

Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:33:39 -05:00
Eric Paris 70249a9cfd audit: use define's for audit version
Give names to the audit versions.  Just something for a userspace
programmer to know what the version provides.

Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:33:36 -05:00
Eric Paris c81825dd6b audit: wait_for_auditd rework for readability
We had some craziness with signed to unsigned long casting which appears
wholely unnecessary.  Just use signed long.  Even though 2 values of the
math equation are unsigned longs the result is expected to be a signed
long.  So why keep casting the result to signed long?  Just make it
signed long and use it.

We also remove the needless "timeout" variable.  We already have the
stack "sleep_time" variable.  Just use that...

Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:33:27 -05:00
Richard Guy Briggs ad2ac26327 audit: log task info on feature change
Add task information to the log when changing a feature state.

Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:32:56 -05:00
Gao feng de92fc97e1 audit: fix incorrect set of audit_sock
NETLINK_CB(skb).sk is the socket of user space process,
netlink_unicast in kauditd_send_skb wants the kernel
side socket. Since the sk_state of audit netlink socket
is not NETLINK_CONNECTED, so the netlink_getsockbyportid
doesn't return -ECONNREFUSED.

And the socket of userspace process can be released anytime,
so the audit_sock may point to invalid socket.

this patch sets the audit_sock to the kernel side audit
netlink socket.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:32:49 -05:00
Gao feng 11ee39ebf7 audit: print error message when fail to create audit socket
print the error message and then return -ENOMEM.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:32:44 -05:00
Richard Guy Briggs 724e4fcc8d audit: log on errors from filter user rules
An error on an AUDIT_NEVER rule disabled logging on that rule.
On error on AUDIT_NEVER rules, log.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:32:31 -05:00
Toshiyuki Okajima 6dd80aba90 audit: audit_log_start running on auditd should not stop
The backlog cannot be consumed when audit_log_start is running on auditd
even if audit_log_start calls wait_for_auditd to consume it.
The situation is the deadlock because only auditd can consume the backlog.
If the other process needs to send the backlog, it can be also stopped
by the deadlock.

So, audit_log_start running on auditd should not stop.

You can see the deadlock with the following reproducer:
 # auditctl -a exit,always -S all
 # reboot

Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Reviewed-by: gaofeng@cn.fujitsu.com
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:32:22 -05:00
Richard Guy Briggs 1b7b533f65 audit: drop audit_cmd_lock in AUDIT_USER family of cases
We do not need to hold the audit_cmd_mutex for this family of cases.  The
possible exception to this is the call to audit_filter_user(), so drop the lock
immediately after.  To help in fixing the race we are trying to avoid, make
sure that nothing called by audit_filter_user() calls audit_log_start().  In
particular, watch out for *_audit_rule_match().

This fix will take care of systemd and anything USING audit.  It still means
that we could race with something configuring audit and auditd shutting down.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Reported-by: toshi.okajima@jp.fujitsu.com
Tested-by: toshi.okajima@jp.fujitsu.com
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:32:11 -05:00
Eric Paris 4440e85481 audit: convert all sessionid declaration to unsigned int
Right now the sessionid value in the kernel is a combination of u32,
int, and unsigned int.  Just use unsigned int throughout.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:31:46 -05:00
Paul Davies C ff235f51a1 audit: Added exe field to audit core dump signal log
Currently when the coredump signals are logged by the audit system, the
actual path to the executable is not logged. Without details of exe, the
system admin may not have an exact idea on what program failed.

This patch changes the audit_log_task() so that the path to the exe is also
logged.

This was copied from audit_log_task_info() and the latter enhanced to avoid
disappearing text fields.

Signed-off-by: Paul Davies C <pauldaviesc@gmail.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:31:38 -05:00
Richard Guy Briggs 34eab0a7cd audit: prevent an older auditd shutdown from orphaning a newer auditd startup
There have been reports of auditd restarts resulting in kaudit not being able
to find a newly registered auditd.  It results in reports such as:
	kernel: [ 2077.233573] audit: *NO* daemon at audit_pid=1614
	kernel: [ 2077.234712] audit: audit_lost=97 audit_rate_limit=0 audit_backlog_limit=320
	kernel: [ 2077.234718] audit: auditd disappeared
		(previously mis-spelled "dissapeared")

One possible cause is a race between the shutdown of an older auditd and a
newer one.  If the newer one sets the daemon pid to itself in kauditd before
the older one has cleared the daemon pid, the newer daemon pid will be erased.
This could be caused by an automated system, or by manual intervention, but in
either case, there is no use in having the older daemon clear the daemon pid
reference since its old pid is no longer being referenced.  This patch will
prevent that specific case, returning an error of EACCES.

The case for preventing a newer auditd from registering itself if there is an
existing auditd is a more difficult case that is beyond the scope of this
patch.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:31:27 -05:00
Richard Guy Briggs ce0d9f0469 audit: refactor audit_receive_msg() to clarify AUDIT_*_RULE* cases
audit_receive_msg() needlessly contained a fallthrough case that called
audit_receive_filter(), containing no common code between the cases.  Separate
them to make the logic clearer.  Refactor AUDIT_LIST_RULES, AUDIT_ADD_RULE,
AUDIT_DEL_RULE cases to create audit_rule_change(), audit_list_rules_send()
functions.  This should not functionally change the logic.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:31:22 -05:00
Richard Guy Briggs a06e56b2a1 audit: log AUDIT_TTY_SET config changes
Log transition of config changes when AUDIT_TTY_SET is called, including both
enabled and log_passwd values now in the struct.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:31:15 -05:00
Richard Guy Briggs 04ee1a3b8f audit: get rid of *NO* daemon at audit_pid=0 message
kauditd_send_skb is called after audit_pid was checked to be non-zero.

However, it can be set to 0 due to auditd exiting while kauditd_send_skb
is still executed and this can result in a spurious warning about missing
auditd.

Re-check audit_pid before printing the message.

Signed-off-by: Mateusz Guzik <mguzik@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: linux-kernel@vger.kernel.org
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:31:07 -05:00
Richard Guy Briggs 40c0775e5e audit: allow unlimited backlog queue
Since audit can already be disabled by "audit=0" on the kernel boot line, or by
the command "auditctl -e 0", it would be more useful to have the
audit_backlog_limit set to zero mean effectively unlimited (limited only by
system RAM).

Acked-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:30:38 -05:00
Gao feng 4547b3bc43 audit: use old_lock in audit_set_feature
we already have old_lock, no need to calculate it again.

Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:30:19 -05:00
Gao feng b6c50fe0be audit: don't generate audit feature changed log when audit disabled
If audit is disabled,we shouldn't generate the audit log.

Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:29:06 -05:00
Gao feng aabce351b5 audit: fix incorrect order of log new and old feature
The order of new feature and old feature is incorrect,
this patch fix it.

Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:29:00 -05:00
Gao feng d3ca0344b2 audit: remove useless code in audit_enable
Since kernel parameter is operated before
initcall, so the audit_initialized must be
AUDIT_UNINITIALIZED or DISABLED in audit_enable.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:28:53 -05:00
Richard Guy Briggs 51cc83f024 audit: add audit_backlog_wait_time configuration option
reaahead-collector abuses the audit logging facility to discover which files
are accessed at boot time to make a pre-load list

Add a tuning option to audit_backlog_wait_time so that if auditd can't keep up,
or gets blocked, the callers won't be blocked.

Bump audit_status API version to "2".

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:28:45 -05:00
Richard Guy Briggs 09f883a902 audit: clean up AUDIT_GET/SET local variables and future-proof API
Re-named confusing local variable names (status_set and status_get didn't agree
with their command type name) and reduced their scope.

Future-proof API changes by not depending on the exact size of the audit_status
struct and by adding an API version field.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:28:39 -05:00
Richard Guy Briggs f910fde730 audit: add kernel set-up parameter to override default backlog limit
The default audit_backlog_limit is 64.  This was a reasonable limit at one time.

systemd causes so much audit queue activity on startup that auditd doesn't
start before the backlog queue has already overflowed by more than a factor of
2.  On a system with audit= not set on the kernel command line, this isn't an
issue since that history isn't kept for auditd when it is available.  On a
system with audit=1 set on the kernel command line, kaudit tries to keep that
history until auditd is able to drain the queue.

This default can be changed by the "-b" option in audit.rules once the system
has booted, but won't help with lost messages on boot.

One way to solve this would be to increase the default backlog queue size to
avoid losing any messages before auditd is able to consume them.  This would
be overkill to the embedded community and insufficient for some servers.

Another way to solve it might be to add a kconfig option to set the default
based on the system type.  An embedded system would get the current (or
smaller) default, while Workstations might get more than now and servers might
get more.

None of these solutions helps if a system's compiled default is too small to
see the lost messages without compiling a new kernel.

This patch adds a kernel set-up parameter (audit already has one to
enable/disable it) "audit_backlog_limit=<n>" that overrides the default to
allow the system administrator to set the backlog limit.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:28:31 -05:00
Dan Duval 7ecf69bf50 audit: efficiency fix 2: request exclusive wait since all need same resource
These and similar errors were seen on a patched 3.8 kernel when the
audit subsystem was overrun during boot:

  udevd[876]: worker [887] unexpectedly returned with status 0x0100
  udevd[876]: worker [887] failed while handling
'/devices/pci0000:00/0000:00:03.0/0000:40:00.0'
  udevd[876]: worker [880] unexpectedly returned with status 0x0100
  udevd[876]: worker [880] failed while handling
'/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1'

  udevadm settle - timeout of 180 seconds reached, the event queue
contains:
    /sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1 (3995)
    /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/INT3F0D:00 (4034)

  audit: audit_backlog=258 > audit_backlog_limit=256
  audit: audit_lost=1 audit_rate_limit=0 audit_backlog_limit=256

The change below increases the efficiency of the audit code and prevents it
from being overrun:

Use add_wait_queue_exclusive() in wait_for_auditd() to put the
thread on the wait queue.  When kauditd dequeues an skb, all
of the waiting threads are waiting for the same resource, but
only one is going to get it, so there's no need to wake up
more than one waiter.

See: https://lkml.org/lkml/2013/9/2/479

Signed-off-by: Dan Duval <dan.duval@oracle.com>
Signed-off-by: Chuck Anderson <chuck.anderson@oracle.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:28:19 -05:00
Dan Duval db89731940 audit: efficiency fix 1: only wake up if queue shorter than backlog limit
These and similar errors were seen on a patched 3.8 kernel when the
audit subsystem was overrun during boot:

  udevd[876]: worker [887] unexpectedly returned with status 0x0100
  udevd[876]: worker [887] failed while handling
'/devices/pci0000:00/0000:00:03.0/0000:40:00.0'
  udevd[876]: worker [880] unexpectedly returned with status 0x0100
  udevd[876]: worker [880] failed while handling
'/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1'

  udevadm settle - timeout of 180 seconds reached, the event queue
contains:
    /sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1 (3995)
    /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/INT3F0D:00 (4034)

  audit: audit_backlog=258 > audit_backlog_limit=256
  audit: audit_lost=1 audit_rate_limit=0 audit_backlog_limit=256

The change below increases the efficiency of the audit code and prevents it
from being overrun:

Only issue a wake_up in kauditd if the length of the skb queue is less than the
backlog limit.  Otherwise, threads waiting in wait_for_auditd() will simply
wake up, discover that the queue is still too long for them to proceed, and go
back to sleep.  This results in wasted context switches and machine cycles.
kauditd_thread() is the only function that removes buffers from audit_skb_queue
so we can't race.  If we did, the timeout in wait_for_auditd() would expire and
the waiting thread would continue.

See: https://lkml.org/lkml/2013/9/2/479

Signed-off-by: Dan Duval <dan.duval@oracle.com>
Signed-off-by: Chuck Anderson <chuck.anderson@oracle.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:28:08 -05:00
Richard Guy Briggs ae887e0bdc audit: make use of remaining sleep time from wait_for_auditd
If wait_for_auditd() times out, go immediately to the error function rather
than retesting the loop conditions.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:27:53 -05:00
Richard Guy Briggs e789e561a5 audit: reset audit backlog wait time after error recovery
When the audit queue overflows and times out (audit_backlog_wait_time), the
audit queue overflow timeout is set to zero.  Once the audit queue overflow
timeout condition recovers, the timeout should be reset to the original value.

See also:
	https://lkml.org/lkml/2013/9/2/473

Cc: stable@vger.kernel.org # v3.8-rc4+
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Dan Duval <dan.duval@oracle.com>
Signed-off-by: Chuck Anderson <chuck.anderson@oracle.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:27:30 -05:00
Richard Guy Briggs 33faba7fa7 audit: listen in all network namespaces
Convert audit from only listening in init_net to use register_pernet_subsys()
to dynamically manage the netlink socket list.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:27:24 -05:00
Richard Guy Briggs 2f2ad10133 audit: restore order of tty and ses fields in log output
When being refactored from audit_log_start() to audit_log_task_info(), in
commit e23eb920 the tty and ses fields in the log output got transposed.
Restore to original order to avoid breaking search tools.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:27:16 -05:00
Richard Guy Briggs f9441639e6 audit: fix netlink portid naming and types
Normally, netlink ports use the PID of the userspace process as the port ID.
If the PID is already in use by a port, the kernel will allocate another port
ID to avoid conflict.  Re-name all references to netlink ports from pid to
portid to reflect this reality and avoid confusion with actual PIDs.  Ports
use the __u32 type, so re-type all portids accordingly.

(This patch is very similar to ebiederman's 5deadd69)

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:26:52 -05:00
Eric Paris fc582aef7d Linux 3.12
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQEcBAABAgAGBQJSdt9HAAoJEHm+PkMAQRiGnzEH/345Keg5dp+oKACnokBfzOtp
 V0p3g5EBsGtzEVnV+1B96trczDUtWdDFFr5GfGSj565NBQpFyc+iZC1mC99RDJCs
 WUquGFqlLMK2aV0SbKwCO4K1rJ5A0TRVj0ZRJOUJUY7jwNf5Qahny0WBVjO/8qAY
 UvJK1rktBClhKdH53YtpDHHgXBeZ2LOrzt1fQ/AMpujGbZauGvnLdNOli5r2kCFK
 jzoOgFLvX+PHU/5/d4/QyJPeQNPva5hjk5Ho9UuSJYhnFtPO3EkD4XZLcpcbNEJb
 LqBvbnZWm6CS435lfU1l93RqQa5xMO9ITk0oe4h69syTSHwWk9aJ+ZTc/4Up+t8=
 =57MC
 -----END PGP SIGNATURE-----

Merge tag 'v3.12'

Linux 3.12

Conflicts:
	fs/exec.c
2013-11-22 18:57:54 -05:00
Jeff Layton d3aea84a4a audit: log the audit_names record type
...to make it clear what the intent behind each record's operation was.

In many cases you can infer this, based on the context of the syscall
and the result. In other cases it's not so obvious. For instance, in
the case where you have a file being renamed over another, you'll have
two different records with the same filename but different inode info.
By logging this information we can clearly tell which one was created
and which was deleted.

This fixes what was broken in commit bfcec708.
Commit 79f6530c should also be backported to stable v3.7+.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2013-11-05 11:09:04 -05:00
Richard Guy Briggs b95d77fe34 audit: use given values in tty_audit enable api
In send/GET, we don't want the kernel to lie about what value is set.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2013-11-05 11:08:42 -05:00
Mathias Krause 4d8fe7376a audit: use nlmsg_len() to get message payload length
Using the nlmsg_len member of the netlink header to test if the message
is valid is wrong as it includes the size of the netlink header itself.
Thereby allowing to send short netlink messages that pass those checks.

Use nlmsg_len() instead to test for the right message length. The result
of nlmsg_len() is guaranteed to be non-negative as the netlink message
already passed the checks of nlmsg_ok().

Also switch to min_t() to please checkpatch.pl.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Cc: stable@vger.kernel.org  # v2.6.6+ for the 1st hunk, v2.6.23+ for the 2nd
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2013-11-05 11:08:37 -05:00
Eric Paris e13f91e3c5 audit: use memset instead of trying to initialize field by field
We currently are setting fields to 0 to initialize the structure
declared on the stack.  This is a bad idea as if the structure has holes
or unpacked space these will not be initialized.  Just use memset.  This
is not a performance critical section of code.

Signed-off-by: Eric Paris <eparis@redhat.com>
2013-11-05 11:08:35 -05:00
Mathias Krause 64fbff9ae0 audit: fix info leak in AUDIT_GET requests
We leak 4 bytes of kernel stack in response to an AUDIT_GET request as
we miss to initialize the mask member of status_set. Fix that.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Cc: stable@vger.kernel.org  # v2.6.6+
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2013-11-05 11:08:30 -05:00
Eric Paris 21b85c31d2 audit: audit feature to set loginuid immutable
This adds a new 'audit_feature' bit which allows userspace to set it
such that the loginuid is absolutely immutable, even if you have
CAP_AUDIT_CONTROL.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2013-11-05 11:08:17 -05:00
Eric Paris d040e5af38 audit: audit feature to only allow unsetting the loginuid
This is a new audit feature which only grants processes with
CAP_AUDIT_CONTROL the ability to unset their loginuid.  They cannot
directly set it from a valid uid to another valid uid.  The ability to
unset the loginuid is nice because a priviledged task, like that of
container creation, can unset the loginuid and then priv is not needed
inside the container when a login daemon needs to set the loginuid.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2013-11-05 11:08:13 -05:00
Eric Paris b0fed40214 audit: implement generic feature setting and retrieving
The audit_status structure was not designed with extensibility in mind.
Define a new AUDIT_SET_FEATURE message type which takes a new structure
of bits where things can be enabled/disabled/locked one at a time.  This
structure should be able to grow in the future while maintaining forward
and backward compatibility (based loosly on the ideas from capabilities
and prctl)

This does not actually add any features, but is just infrastructure to
allow new on/off types of audit system features.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2013-11-05 11:07:30 -05:00
Tyler Hicks 0868a5e150 audit: printk USER_AVC messages when audit isn't enabled
When the audit=1 kernel parameter is absent and auditd is not running,
AUDIT_USER_AVC messages are being silently discarded.

AUDIT_USER_AVC messages should be sent to userspace using printk(), as
mentioned in the commit message of 4a4cd633 ("AUDIT: Optimise the
audit-disabled case for discarding user messages").

When audit_enabled is 0, audit_receive_msg() discards all user messages
except for AUDIT_USER_AVC messages. However, audit_log_common_recv_msg()
refuses to allocate an audit_buffer if audit_enabled is 0. The fix is to
special case AUDIT_USER_AVC messages in both functions.

It looks like commit 50397bd1 ("[AUDIT] clean up audit_receive_msg()")
introduced this bug.

Cc: <stable@kernel.org> # v2.6.25+
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Cc: linux-audit@redhat.com
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2013-11-05 11:07:23 -05:00
Gao feng af0e493d30 Audit: remove duplicate comments
Remove it.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2013-11-05 11:07:14 -05:00
Richard Guy Briggs b8f89caafe audit: remove newline accidentally added during session id helper refactor
A newline was accidentally added during session ID helper refactorization in
commit 4d3fb709.  This needlessly uses up buffer space, messes up syslog
formatting and makes userspace processing less efficient.  Remove it.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2013-11-05 11:07:09 -05:00
Ilya V. Matveychikov 47145705e3 audit: remove duplicate inclusion of the netlink header
Signed-off-by: Ilya V. Matveychikov <matvejchikov@gmail.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2013-11-05 11:06:53 -05:00