[ Upstream commit c149e4763d ]
sun8i-ss does not handle well the possible zero sized sg.
Fixes: d9b45418a9 ("crypto: sun8i-ss - support hash algorithms")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 359e893e8a ]
sun8i-ss fail handling IVs when doing decryption of multiple SGs in-place.
It should backup the last block of each SG source for using it later as
IVs.
In the same time remove allocation on requests path for storing all
IVs.
Fixes: f08fcced6d ("crypto: allwinner - Add sun8i-ss cryptographic offloader")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ffa176362 ]
The DES3 ECB has an IV size set but ECB does not need one.
Fixes: 4ada483978 ("crypto: marvell/cesa - add Triple-DES support")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0eaa515432 ]
The capability detection logic clears bits for the features that are
disabled in a certain SKU. For example, if the bit associate to
compression is not present in the LEGFUSE register, the correspondent
bit is cleared in the capability mask.
This change adds the compression capability to the mask as this was
missing in the commit that enhanced the capability detection logic.
Fixes: cfe4894ecc ("crypto: qat - set COMPRESSION capability for QAT GEN2")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a23804cb8 ]
Set the CIPHER capability for QAT DH895XCC devices if the hardware supports
it. This is done if both the CIPHER and the AUTHENTICATION engines are
available on the device.
Fixes: ad1332aa67 ("crypto: qat - add support for capability detection")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cfe4894ecc ]
Enhance the device capability detection for QAT GEN2 devices to detect if
a device supports the compression service.
This is done by checking both the fuse and the strap registers for c62x
and c3xxx and only the fuse register for dh895xcc.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 547bde7bd4 ]
Set the CIPHER capability for QAT GEN2 devices if the hardware supports
it. This is done if both the CIPHER and the AUTHENTICATION engines are
available on the device.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c127d130f6 ]
In init_winctx_regs(), __pa() is called on winctx->rx_fifo and this
function is called to initialize registers for receive and fault
windows. But the real address is passed in winctx->rx_fifo for
receive windows and the virtual address for fault windows which
causes errors with DEBUG_VIRTUAL enabled. Fixes this issue by
assigning only real address to rx_fifo in vas_rx_win_attr struct
for both receive and fault windows.
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/338e958c7ab8f3b266fa794a1f80f99b9671829e.camel@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a260436c98 ]
Use a fine grained specification of DMA mapping directions
in certain cases, allowing both a more optimized operation
as well as shushing out a harmless, though persky
dma-debug warning.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4ee4cdad36 upstream.
Since commit 358ba762d9 ("crypto: caam - enable prediction resistance
in HRWNG") the following CAAM errors can be seen on i.MX6SX:
caam_jr 2101000.jr: 20003c5b: CCB: desc idx 60: RNG: Hardware error
hwrng: no data available
This error is due to an incorrect entropy delay for i.MX6SX.
Fix it by increasing the minimum entropy delay for i.MX6SX
as done in U-Boot:
https://patchwork.ozlabs.org/project/uboot/patch/20220415111049.2565744-1-gaurav.jain@nxp.com/
As explained in the U-Boot patch:
"RNG self tests are run to determine the correct entropy delay.
Such tests are executed with different voltages and temperatures to identify
the worst case value for the entropy delay. For i.MX6SX, it was determined
that after adding a margin value of 1000 the minimum entropy delay should be
at least 12000."
Cc: <stable@vger.kernel.org>
Fixes: 358ba762d9 ("crypto: caam - enable prediction resistance in HRWNG")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 16287397ec upstream.
The commit referenced in the Fixes tag removed the 'break' from the else
branch in qcom_rng_read(), causing an infinite loop whenever 'max' is
not a multiple of WORD_SZ. This can be reproduced e.g. by running:
kcapi-rng -b 67 >/dev/null
There are many ways to fix this without adding back the 'break', but
they all seem more awkward than simply adding it back, so do just that.
Tested on a machine with Qualcomm Amberwing processor.
Fixes: a680b1832c ("crypto: qcom-rng - ensure buffer for generate is completely filled")
Cc: stable@vger.kernel.org
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e9a36feece ]
pm_runtime_get_sync() will increment pm usage counter even it
failed. Forgetting to call pm_runtime_put_noidle will result
in reference leak in stm32_crc_remove, so we should fix it.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8a2652826 ]
It is not need to enable sm4 extra mode in at HW V3. Here is fix it.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05b3bade29 ]
The kernel test rebot report this warning: Uninitialized variable: ret.
The code flow may return value of ret directly. This value is an
uninitialized variable, here is fix it.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d950c3407 ]
kfree_sensitive(ctx_p->user.key) will free the ctx_p->user.key. But
ctx_p->user.key is still used in the next line, which will lead to a
use after free.
We can call kfree_sensitive() after dev_dbg() to avoid the uaf.
Fixes: 63ee04c8b4 ("crypto: ccree - add skcipher support")
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54cce8ecb9 ]
ccp_dmaengine_register adds dma_chan->device_node to dma_dev->channels list
but ccp_dmaengine_unregister didn't remove them.
That can cause crashes in various dmaengine methods that tries to use dma_dev->channels
Fixes: 58ea8abf49 ("crypto: ccp - Register the CCP as a DMA...")
Signed-off-by: Dāvis Mosāns <davispuh@gmail.com>
Acked-by: John Allen <john.allen@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 647d41d395 ]
vmx-crypto module depends on CRYPTO_AES, CRYPTO_CBC, CRYPTO_CTR or
CRYPTO_XTS, thus add them.
These dependencies are likely to be enabled, but if
CRYPTO_DEV_VMX=y && !CRYPTO_MANAGER_DISABLE_TESTS
and either of CRYPTO_AES, CRYPTO_CBC, CRYPTO_CTR or CRYPTO_XTS is built
as module or disabled, alg_test() from crypto/testmgr.c complains during
boot about failing to allocate the generic fallback implementations
(2 == ENOENT):
[ 0.540953] Failed to allocate xts(aes) fallback: -2
[ 0.541014] alg: skcipher: failed to allocate transform for p8_aes_xts: -2
[ 0.541120] alg: self-tests for p8_aes_xts (xts(aes)) failed (rc=-2)
[ 0.544440] Failed to allocate ctr(aes) fallback: -2
[ 0.544497] alg: skcipher: failed to allocate transform for p8_aes_ctr: -2
[ 0.544603] alg: self-tests for p8_aes_ctr (ctr(aes)) failed (rc=-2)
[ 0.547992] Failed to allocate cbc(aes) fallback: -2
[ 0.548052] alg: skcipher: failed to allocate transform for p8_aes_cbc: -2
[ 0.548156] alg: self-tests for p8_aes_cbc (cbc(aes)) failed (rc=-2)
[ 0.550745] Failed to allocate transformation for 'aes': -2
[ 0.550801] alg: cipher: Failed to load transform for p8_aes: -2
[ 0.550892] alg: self-tests for p8_aes (aes) failed (rc=-2)
Fixes: c07f5d3da6 ("crypto: vmx - Adding support for XTS")
Fixes: d2e3ae6f3a ("crypto: vmx - Enabling VMX module for PPC64")
Suggested-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a2a464f86 ]
Due to the subreq pointer misuse the private context memory. The aead
soft crypto occasionally casues the OS panic as setting the 64K page.
Here is fix it.
Fixes: 6c46a3297b ("crypto: hisilicon/sec - add fallback tfm...")
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1fb37b5692 ]
Refuse to try mapping zero bytes as this may cause a fault
on some configurations / platforms and it seems the prev.
attempt is not enough and we need to be more explicit.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Fixes: ce0fc6db38 ("crypto: ccree - protect against empty or NULL
scatterlists")
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 973d74e938 ]
When loading rockchip crypto module, testmgr complains that ivsize of ecb-des3-ede-rk
is not the same than generic implementation.
In fact ECB does not use an IV.
Fixes: ce0183cb64 ("crypto: rockchip - switch to skcipher API")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d841af23a ]
No issues were found while using the driver with dm-crypt enabled. So
CONFIG_DM_CRYPT check in the driver can be removed.
This also fixes the NULL pointer dereference in driver release if
CONFIG_DM_CRYPT is enabled.
...
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
...
Call trace:
crypto_unregister_alg+0x68/0xfc
crypto_unregister_skciphers+0x44/0x60
otx2_cpt_crypto_exit+0x100/0x1a0
otx2_cptvf_remove+0xf8/0x200
pci_device_remove+0x3c/0xd4
__device_release_driver+0x188/0x234
device_release_driver+0x2c/0x4c
...
Fixes: 6f03f0e8b6 ("crypto: octeontx2 - register with linux crypto framework")
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28e9b6d819 ]
This patch fixes a bug in scatterlist processing that may cause incorrect AES block encryption/decryption.
Fixes: 2e6d793e1b ("crypto: mxs-dcp - Use sg_mapping_iter to copy data")
Signed-off-by: Tomas Paukrt <tomaspaukrt@email.cz>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 881fc7fba6 ]
When adding hashes support to sun8i-ss, I have added them only on A83T.
But I forgot that 0 is a valid algorithm ID, so hashes are enabled on A80 but
with an incorrect ID.
Anyway, even with correct IDs, hashes do not work on A80 and I cannot
find why.
So let's disable all of them on A80.
Fixes: d9b45418a9 ("crypto: sun8i-ss - support hash algorithms")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e1ec11d3e ]
Initialize psp_ret inside of __sev_platform_init_locked() because there
are many failure paths with PSP initialization that do not set
__sev_do_cmd_locked().
Fixes: e423b9d75e77: ("crypto: ccp - Move SEV_INIT retry for corrupted data")
Signed-off-by: Peter Gonda <pgonda@google.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Marc Orr <marcorr@google.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: John Allen <john.allen@amd.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8893d27ffc upstream.
The implementations of aead and skcipher in the QAT driver do not
support properly requests with the CRYPTO_TFM_REQ_MAY_BACKLOG flag set.
If the HW queue is full, the driver returns -EBUSY but does not enqueue
the request.
This can result in applications like dm-crypt waiting indefinitely for a
completion of a request that was never submitted to the hardware.
To avoid this problem, disable the registration of all crypto algorithms
in the QAT driver by setting the number of crypto instances to 0 at
configuration time.
Cc: stable@vger.kernel.org
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a680b1832c upstream.
The generate function in struct rng_alg expects that the destination
buffer is completely filled if the function returns 0. qcom_rng_read()
can run into a situation where the buffer is partially filled with
randomness and the remaining part of the buffer is zeroed since
qcom_rng_generate() doesn't check the return value. This issue can
be reproduced by running the following from libkcapi:
kcapi-rng -b 9000000 > OUTFILE
The generated OUTFILE will have three huge sections that contain all
zeros, and this is caused by the code where the test
'val & PRNG_STATUS_DATA_AVAIL' fails.
Let's fix this issue by ensuring that qcom_rng_read() always returns
with a full buffer if the function returns success. Let's also have
qcom_rng_generate() return the correct value.
Here's some statistics from the ent project
(https://www.fourmilab.ch/random/) that shows information about the
quality of the generated numbers:
$ ent -c qcom-random-before
Value Char Occurrences Fraction
0 606748 0.067416
1 33104 0.003678
2 33001 0.003667
...
253 � 32883 0.003654
254 � 33035 0.003671
255 � 33239 0.003693
Total: 9000000 1.000000
Entropy = 7.811590 bits per byte.
Optimum compression would reduce the size
of this 9000000 byte file by 2 percent.
Chi square distribution for 9000000 samples is 9329962.81, and
randomly would exceed this value less than 0.01 percent of the
times.
Arithmetic mean value of data bytes is 119.3731 (127.5 = random).
Monte Carlo value for Pi is 3.197293333 (error 1.77 percent).
Serial correlation coefficient is 0.159130 (totally uncorrelated =
0.0).
Without this patch, the results of the chi-square test is 0.01%, and
the numbers are certainly not random according to ent's project page.
The results improve with this patch:
$ ent -c qcom-random-after
Value Char Occurrences Fraction
0 35432 0.003937
1 35127 0.003903
2 35424 0.003936
...
253 � 35201 0.003911
254 � 34835 0.003871
255 � 35368 0.003930
Total: 9000000 1.000000
Entropy = 7.999979 bits per byte.
Optimum compression would reduce the size
of this 9000000 byte file by 0 percent.
Chi square distribution for 9000000 samples is 258.77, and randomly
would exceed this value 42.24 percent of the times.
Arithmetic mean value of data bytes is 127.5006 (127.5 = random).
Monte Carlo value for Pi is 3.141277333 (error 0.01 percent).
Serial correlation coefficient is 0.000468 (totally uncorrelated =
0.0).
This change was tested on a Nexus 5 phone (msm8974 SoC).
Signed-off-by: Brian Masney <bmasney@redhat.com>
Fixes: ceec5f5b59 ("crypto: qcom-rng - Add Qcom prng driver")
Cc: stable@vger.kernel.org # 4.19+
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0ea275df84 upstream.
If kstrtoint() fails then "lfs_num" is uninitialized and the warning
doesn't make any sense. Just delete it.
Fixes: 8ec8015a31 ("crypto: octeontx2 - add support to process the crypto request")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit efd21e10fc upstream.
When enable the kernel debug config, there is below calltrace detected:
BUG: using smp_processor_id() in preemptible [00000000] code: cryptomgr_test/339
caller is debug_smp_processor_id+0x20/0x30
CPU: 9 PID: 339 Comm: cryptomgr_test Not tainted 5.10.63-yocto-standard #1
Hardware name: NXP Layerscape LX2160ARDB (DT)
Call trace:
dump_backtrace+0x0/0x1a0
show_stack+0x24/0x30
dump_stack+0xf0/0x13c
check_preemption_disabled+0x100/0x110
debug_smp_processor_id+0x20/0x30
dpaa2_caam_enqueue+0x10c/0x25c
......
cryptomgr_test+0x38/0x60
kthread+0x158/0x164
ret_from_fork+0x10/0x38
According to the comment in commit ac5d15b4519f("crypto: caam/qi2
- use affine DPIOs "), because preemption is no longer disabled
while trying to enqueue an FQID, it might be possible to run the
enqueue on a different CPU(due to migration, when in process context),
however this wouldn't be a functionality issue. But there will be
above calltrace when enable kernel debug config. So, replace this_cpu_ptr
with raw_cpu_ptr to avoid above call trace.
Fixes: ac5d15b451 ("crypto: caam/qi2 - use affine DPIOs")
Cc: stable@vger.kernel.org
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 29009604ad upstream.
The include/linux/crypto.h struct crypto_alg field cra_driver_name description
states "Unique name of the transformation provider. " ... " this contains the
name of the chip or provider and the name of the transformation algorithm."
In case of the stm32-crc driver, field cra_driver_name is identical for all
registered transformation providers and set to the name of the driver itself,
which is incorrect. This patch fixes it by assigning a unique cra_driver_name
to each registered transformation provider.
The kernel crash is triggered when the driver calls crypto_register_shashes()
which calls crypto_register_shash(), which calls crypto_register_alg(), which
calls __crypto_register_alg(), which returns -EEXIST, which is propagated
back through this call chain. Upon -EEXIST from crypto_register_shash(), the
crypto_register_shashes() starts unregistering the providers back, and calls
crypto_unregister_shash(), which calls crypto_unregister_alg(), and this is
where the BUG() triggers due to incorrect cra_refcnt.
Fixes: b51dbe9091 ("crypto: stm32 - Support for STM32 CRC32 crypto module")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: <stable@vger.kernel.org> # 4.12+
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Fabien Dessenne <fabien.dessenne@st.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Lionel Debieve <lionel.debieve@st.com>
Cc: Nicolas Toromanoff <nicolas.toromanoff@st.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-crypto@vger.kernel.org
Acked-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c2aec59be0 upstream.
This fix is basically the same as 3d6b661330 ("crypto: stm32 -
Revert broken pm_runtime_resume_and_get changes"), just for the omap
driver. If the return value isn't used, then pm_runtime_get_sync()
has to be used for ensuring that the usage count is balanced.
Fixes: 1f34cc4a8d ("crypto: omap-aes - Fix PM reference leak on omap-aes.c")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 51fa916b81 ]
hpre_curve25519_src_init() allocates memory for 'ptr' before calling
memcmp(). If memcmp() returns 0, the function will return '-EINVAL'
without freeing memory.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e423b9d75e ]
Move the data corrupted retry of SEV_INIT into the
__sev_platform_init_locked() function. This is for upcoming INIT_EX
support as well as helping direct callers of
__sev_platform_init_locked() which currently do not support the
retry.
Signed-off-by: Peter Gonda <pgonda@google.com>
Reviewed-by: Marc Orr <marcorr@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Marc Orr <marcorr@google.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David Rientjes <rientjes@google.com>
Cc: John Allen <john.allen@amd.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10371b6212 ]
If we're going to cap "eng_grp->g->engs_num" upper bounds then we should
cap the lower bounds as well.
Fixes: 43ac0b824f ("crypto: octeontx2 - load microcode and create engine groups")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f9dd4c802 ]
When hisi_qm_resume() returns 0, it indicates that the device has started
successfully. If the device fails to start, hisi_qm_resume() needs to
return the actual error code to the caller instead of 0.
Fixes: d7ea53395b ("crypto: hisilicon - add runtime PM ops")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d6b661330 ]
We should not call pm_runtime_resume_and_get where the reference
count is expected to be incremented unconditionally. This patch
reverts these calls to the original unconditional get_sync call.
Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Fixes: 747bf30fd9 ("crypto: stm32/cryp - Fix PM reference leak...")
Fixes: 1cb3ad7019 ("crypto: stm32/hash - Fix PM reference leak...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b898d5cfa ]
Extra crypto manager auto test were crashing or failling due
to 2 reasons:
- block in a dead loop (dues to issues in cipher end process management)
- crash due to read/write unmapped memory (this crash was also reported
when using openssl afalg engine)
Rework interrupt management, interrupts are masked as soon as they are
no more used: if input buffer is fully consumed, "Input FIFO not full"
interrupt is masked and if output buffer is full, "Output FIFO not
empty" interrupt is masked.
And crypto request finish when input *and* outpout buffer are fully
read/write.
About the crash due to unmapped memory, using scatterwalk_copychunks()
that will map and copy each block fix the issue.
Using this api and copying full block will also fix unaligned data
access, avoid early copy of in/out buffer, and make useless the extra
alignment constraint.
Fixes: 9e054ec21e ("crypto: stm32 - Support for STM32 CRYP crypto module")
Reported-by: Marek Vasut <marex@denx.de>
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa97dc2d48 ]
This fixes the lrw autotest if lrw uses the CRYP as the AES block cipher
provider (as ecb(aes)). At end of request, CRYP should not update the IV
in case of ECB chaining mode. Indeed the ECB chaining mode never uses
the IV, but the software LRW chaining mode uses the IV field as
a counter and due to the (unexpected) update done by CRYP while the AES
block process, the counter get a wrong value when the IV overflow.
Fixes: 5f49f18d27 ("crypto: stm32/cryp - update to return iv_out")
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39e6e699c7 ]
Some auto tests failed because driver wasn't returning the expected
error with some input size/iv value/tag size.
Now:
Return 0 early for empty buffer. (We don't need to start the engine for
an empty input buffer).
Accept any valid authsize for gcm(aes).
Return -EINVAL if iv for ccm(aes) is invalid.
Return -EINVAL if buffer size is a not a multiple of algorithm block size.
Fixes: 9e054ec21e ("crypto: stm32 - Support for STM32 CRYP crypto module")
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d703c7a994 ]
Don't erase key:
If key is erased before the crypto_finalize_.*_request() call, some
pending process will run with a key={ 0 }.
Moreover if the key is reset at end of request, it breaks xts chaining
mode, as for last xts block (in case input len is not a multiple of
block) a new AES request is started without calling again set_key().
Fixes: 9e054ec21e ("crypto: stm32 - Support for STM32 CRYP crypto module")
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41c76690b0 ]
STM32 CRYP hardware doesn't manage CTR counter bigger than max U32, as
a workaround, at each block the current IV is saved, if the saved IV
lower u32 is 0xFFFFFFFF, the full IV is manually incremented, and set
in hardware.
Fixes: bbb2832620 ("crypto: stm32 - Fix sparse warnings")
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 087e1d715b ]
When caam queue is full (-ENOSPC), caam frees descriptor memory.
crypto-engine checks if retry support is true and h/w queue
is full(-ENOSPC), then requeue the crypto request.
During processing the requested descriptor again, caam gives below error.
(caam_jr 30902000.jr: 40000006: DECO: desc idx 0: Invalid KEY Command).
This patch adds a check to return when caam input ring is full
and retry support is true. so descriptor memory is not freed
and requeued request can be processed again.
Fixes: 2d653936eb ("crypto: caam - enable crypto-engine retry mechanism")
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5002200b4f ]
If the remote function did not ACK the reception of a message, the
function __adf_iov_putmsg() could detect it as a collision.
This was due to the fact that the collision and the timeout checks after
the ACK loop were in the wrong order. The timeout must be checked at the
end of the loop, so fix by swapping the order of the two checks.
Fixes: 9b768e8a39 ("crypto: qat - detect PFVF collision after ACK")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Co-developed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e680f94bc ]
The functions adf_iov_putmsg() and __adf_iov_putmsg() are shared by both
PF and VF. Any logging or documentation should not refer to any specific
direction.
Make comments and log messages direction agnostic by replacing PF2VF
with PFVF. Also fix the wording for some related comments.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e17f49bb24 ]
The initial version of the PFVF protocol included an initial "carrier
sensing" to get ownership of the channel.
Collisions can happen anyway, the extra wait and test does not prevent
collisions, it instead slows the communication down, so remove it.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9c195aaee ]
Pointer alg points to sub field of tmpl, it
is dereferenced after tmpl is freed. Fix
this by accessing alg before free tmpl.
Fixes: ec8f5d8f ("crypto: qce - Qualcomm crypto engine driver")
Signed-off-by: Chengfeng Ye <cyeaa@connect.ust.hk>
Acked-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Corentin Labbe
Giovanni Cabiddu
Haren Myneni
Gilad Ben-Yossef
Fabio Estevam
Ondrej Mosnacek
Zheng Yongjun
Kai Ye
Jianglei Nie
Dāvis Mosāns
Petr Vorel
Shijith Thotton
Tomas Paukrt
Peter Gonda
Brian Masney
Dan Carpenter
Meng Li
Marek Vasut
Heiner Kallweit
Weili Qian
Herbert Xu
Nicolas Toromanoff
Gaurav Jain
Marco Chiappero
Chengfeng Ye