Граф коммитов

896524 Коммитов

Автор SHA1 Сообщение Дата
Madhuparna Bhowmik edf0d283d9 ipv6: xfrm6_tunnel.c: Use built-in RCU list checking
hlist_for_each_entry_rcu() has built-in RCU and lock checking.

Pass cond argument to list_for_each_entry_rcu() to silence
false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled
by default.

Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-02-27 10:17:41 +01:00
Xin Long a1a7e3a36e xfrm: add the missing verify_sec_ctx_len check in xfrm_add_acquire
Without doing verify_sec_ctx_len() check in xfrm_add_acquire(), it may be
out-of-bounds to access uctx->ctx_str with uctx->ctx_len, as noticed by
syz:

  BUG: KASAN: slab-out-of-bounds in selinux_xfrm_alloc_user+0x237/0x430
  Read of size 768 at addr ffff8880123be9b4 by task syz-executor.1/11650

  Call Trace:
   dump_stack+0xe8/0x16e
   print_address_description.cold.3+0x9/0x23b
   kasan_report.cold.4+0x64/0x95
   memcpy+0x1f/0x50
   selinux_xfrm_alloc_user+0x237/0x430
   security_xfrm_policy_alloc+0x5c/0xb0
   xfrm_policy_construct+0x2b1/0x650
   xfrm_add_acquire+0x21d/0xa10
   xfrm_user_rcv_msg+0x431/0x6f0
   netlink_rcv_skb+0x15a/0x410
   xfrm_netlink_rcv+0x6d/0x90
   netlink_unicast+0x50e/0x6a0
   netlink_sendmsg+0x8ae/0xd40
   sock_sendmsg+0x133/0x170
   ___sys_sendmsg+0x834/0x9a0
   __sys_sendmsg+0x100/0x1e0
   do_syscall_64+0xe5/0x660
   entry_SYSCALL_64_after_hwframe+0x6a/0xdf

So fix it by adding the missing verify_sec_ctx_len check there.

Fixes: 980ebd2579 ("[IPSEC]: Sync series - acquire insert")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-02-12 11:06:32 +01:00
Xin Long 171d449a02 xfrm: fix uctx len check in verify_sec_ctx_len
It's not sufficient to do 'uctx->len != (sizeof(struct xfrm_user_sec_ctx) +
uctx->ctx_len)' check only, as uctx->len may be greater than nla_len(rt),
in which case it will cause slab-out-of-bounds when accessing uctx->ctx_str
later.

This patch is to fix it by return -EINVAL when uctx->len > nla_len(rt).

Fixes: df71837d50 ("[LSM-IPSec]: Security association restriction.")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-02-12 11:06:32 +01:00
Nicolas Dichtel f1ed10264e vti[6]: fix packet tx through bpf_redirect() in XinY cases
I forgot the 4in6/6in4 cases in my previous patch. Let's fix them.

Fixes: 95224166a9 ("vti[6]: fix packet tx through bpf_redirect()")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-02-06 13:27:30 +01:00
Raed Salem 03891f820c xfrm: handle NETDEV_UNREGISTER for xfrm device
This patch to handle the asynchronous unregister
device event so the device IPsec offload resources
could be cleanly released.

Fixes: e4db5b61c5 ("xfrm: policy: remove pcpu policy cache")
Signed-off-by: Raed Salem <raeds@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-02-04 12:43:46 +01:00
Jakub Kicinski a444ad1432 Merge branch 'netdevsim-fix-several-bugs-in-netdevsim-module'
Taehee Yoo says:

=====================
netdevsim: fix several bugs in netdevsim module

This patchset fixes several bugs in netdevsim module.

1. The first patch fixes using uninitialized resources
This patch fixes two similar problems, which is to use uninitialized
resources.
a) In the current code, {new/del}_device_store() use resource,
they are initialized by __init().
But, these functions could be called before __init() is finished.
So, accessing uninitialized data could occur and it eventually makes panic.
b) In the current code, {new/del}_port_store() uses resource,
they are initialized by new_device_store().
But thes functions could be called before new_device_store() is finished.

2. The second patch fixes another race condition.
The main problem is a race condition in {new/del}_port() and devlink reload
function.
These functions would allocate and remove resources. So these functions
should not be executed concurrently.

3. The third patch fixes a panic in nsim_dev_take_snapshot_write().
nsim_dev_take_snapshot_write() uses nsim_dev and nsim_dev->dummy_region.
But these data could be removed by both reload routine and
del_device_store(). And these functions could be executed concurrently.

4. The fourth patch fixes stack-out-of-bound in nsim_dev_debugfs_init().
nsim_dev_debugfs_init() provides only 16bytes for name pointer.
But, there are some case the name length is over 16bytes.
So, stack-out-of-bound occurs.

5. The fifth patch uses IS_ERR instead of IS_ERR_OR_NULL.
debugfs_create_{dir/file} doesn't return NULL.
So, IS_ERR() is more correct.

6. The sixth patch avoids kmalloc warning.
When too large memory allocation is requested by user-space, kmalloc
internally prints warning message.
That warning message is not necessary.
In order to avoid that, it adds __GFP_NOWARN.

7. The last patch removes an unused sdev.c file

Change log:

v2 -> v3:
 - Use smp_load_acquire() and smp_store_release() for flag variables.
 - Change variable names.
 - Fix deadlock in second patch.
 - Update lock variable comment.
 - Add new patch for fixing panic in snapshot_write().
 - Include Reviewed-by tags.
 - Update some log messages and comment.

v1 -> v2:
 - Splits a fixing race condition patch into two patches.
 - Fix incorrect Fixes tags.
 - Update comments
 - Fix use-after-free
 - Add a new patch, which removes an unused sdev.c file.
 - Remove a patch, which tries to avoid debugfs warning.
=====================

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03 15:38:50 -08:00
Taehee Yoo 245311637f netdevsim: remove unused sdev code
sdev.c code is merged into dev.c and is not used anymore.
it would be removed.

Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03 15:32:20 -08:00
Taehee Yoo 83cf4213ba netdevsim: use __GFP_NOWARN to avoid memalloc warning
vfnum buffer size and binary_len buffer size is received by user-space.
So, this buffer size could be too large. If so, kmalloc will internally
print a warning message.
This warning message is actually not necessary for the netdevsim module.
So, this patch adds __GFP_NOWARN.

Test commands:
    modprobe netdevsim
    echo 1 > /sys/bus/netdevsim/new_device
    echo 1000000000 > /sys/devices/netdevsim1/sriov_numvfs

Splat looks like:
[  357.847266][ T1000] WARNING: CPU: 0 PID: 1000 at mm/page_alloc.c:4738 __alloc_pages_nodemask+0x2f3/0x740
[  357.850273][ T1000] Modules linked in: netdevsim veth openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrx
[  357.852989][ T1000] CPU: 0 PID: 1000 Comm: bash Tainted: G    B             5.5.0-rc5+ #270
[  357.854334][ T1000] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[  357.855703][ T1000] RIP: 0010:__alloc_pages_nodemask+0x2f3/0x740
[  357.856669][ T1000] Code: 64 fe ff ff 65 48 8b 04 25 c0 0f 02 00 48 05 f0 12 00 00 41 be 01 00 00 00 49 89 47 0
[  357.860272][ T1000] RSP: 0018:ffff8880b7f47bd8 EFLAGS: 00010246
[  357.861009][ T1000] RAX: ffffed1016fe8f80 RBX: 1ffff11016fe8fae RCX: 0000000000000000
[  357.861843][ T1000] RDX: 0000000000000000 RSI: 0000000000000017 RDI: 0000000000000000
[  357.862661][ T1000] RBP: 0000000000040dc0 R08: 1ffff11016fe8f67 R09: dffffc0000000000
[  357.863509][ T1000] R10: ffff8880b7f47d68 R11: fffffbfff2798180 R12: 1ffff11016fe8f80
[  357.864355][ T1000] R13: 0000000000000017 R14: 0000000000000017 R15: ffff8880c2038d68
[  357.865178][ T1000] FS:  00007fd9a5b8c740(0000) GS:ffff8880d9c00000(0000) knlGS:0000000000000000
[  357.866248][ T1000] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  357.867531][ T1000] CR2: 000055ce01ba8100 CR3: 00000000b7dbe005 CR4: 00000000000606f0
[  357.868972][ T1000] Call Trace:
[  357.869423][ T1000]  ? lock_contended+0xcd0/0xcd0
[  357.870001][ T1000]  ? __alloc_pages_slowpath+0x21d0/0x21d0
[  357.870673][ T1000]  ? _kstrtoull+0x76/0x160
[  357.871148][ T1000]  ? alloc_pages_current+0xc1/0x1a0
[  357.871704][ T1000]  kmalloc_order+0x22/0x80
[  357.872184][ T1000]  kmalloc_order_trace+0x1d/0x140
[  357.872733][ T1000]  __kmalloc+0x302/0x3a0
[  357.873204][ T1000]  nsim_bus_dev_numvfs_store+0x1ab/0x260 [netdevsim]
[  357.873919][ T1000]  ? kernfs_get_active+0x12c/0x180
[  357.874459][ T1000]  ? new_device_store+0x450/0x450 [netdevsim]
[  357.875111][ T1000]  ? kernfs_get_parent+0x70/0x70
[  357.875632][ T1000]  ? sysfs_file_ops+0x160/0x160
[  357.876152][ T1000]  kernfs_fop_write+0x276/0x410
[  357.876680][ T1000]  ? __sb_start_write+0x1ba/0x2e0
[  357.877225][ T1000]  vfs_write+0x197/0x4a0
[  357.877671][ T1000]  ksys_write+0x141/0x1d0
[ ... ]

Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Fixes: 7957922056 ("netdevsim: add SR-IOV functionality")
Fixes: 82c93a87bf ("netdevsim: implement couple of testing devlink health reporters")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03 15:32:20 -08:00
Taehee Yoo 6556ff32f1 netdevsim: use IS_ERR instead of IS_ERR_OR_NULL for debugfs
Debugfs APIs return valid pointer or error pointer. it doesn't return NULL.
So, using IS_ERR is enough, not using IS_ERR_OR_NULL.

Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03 15:32:20 -08:00
Taehee Yoo 6fb8852b12 netdevsim: fix stack-out-of-bounds in nsim_dev_debugfs_init()
When netdevsim dev is being created, a debugfs directory is created.
The variable "dev_ddir_name" is 16bytes device name pointer and device
name is "netdevsim<dev id>".
The maximum dev id length is 10.
So, 16bytes for device name isn't enough.

Test commands:
    modprobe netdevsim
    echo "1000000000 0" > /sys/bus/netdevsim/new_device

Splat looks like:
[  249.622710][  T900] BUG: KASAN: stack-out-of-bounds in number+0x824/0x880
[  249.623658][  T900] Write of size 1 at addr ffff88804c527988 by task bash/900
[  249.624521][  T900]
[  249.624830][  T900] CPU: 1 PID: 900 Comm: bash Not tainted 5.5.0+ #322
[  249.625691][  T900] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[  249.626712][  T900] Call Trace:
[  249.627103][  T900]  dump_stack+0x96/0xdb
[  249.627639][  T900]  ? number+0x824/0x880
[  249.628173][  T900]  print_address_description.constprop.5+0x1be/0x360
[  249.629022][  T900]  ? number+0x824/0x880
[  249.629569][  T900]  ? number+0x824/0x880
[  249.630105][  T900]  __kasan_report+0x12a/0x170
[  249.630717][  T900]  ? number+0x824/0x880
[  249.631201][  T900]  kasan_report+0xe/0x20
[  249.631723][  T900]  number+0x824/0x880
[  249.632235][  T900]  ? put_dec+0xa0/0xa0
[  249.632716][  T900]  ? rcu_read_lock_sched_held+0x90/0xc0
[  249.633392][  T900]  vsnprintf+0x63c/0x10b0
[  249.633983][  T900]  ? pointer+0x5b0/0x5b0
[  249.634543][  T900]  ? mark_lock+0x11d/0xc40
[  249.635200][  T900]  sprintf+0x9b/0xd0
[  249.635750][  T900]  ? scnprintf+0xe0/0xe0
[  249.636370][  T900]  nsim_dev_probe+0x63c/0xbf0 [netdevsim]
[ ... ]

Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Fixes: ab1d0cc004 ("netdevsim: change debugfs tree topology")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03 15:32:20 -08:00
Taehee Yoo 8526ad9646 netdevsim: fix panic in nsim_dev_take_snapshot_write()
nsim_dev_take_snapshot_write() uses nsim_dev and nsim_dev->dummy_region.
So, during this function, these data shouldn't be removed.
But there is no protecting stuff in this function.

There are two similar cases.
1. reload case
reload could be called during nsim_dev_take_snapshot_write().
When reload is being executed, nsim_dev_reload_down() is called and it
calls nsim_dev_reload_destroy(). nsim_dev_reload_destroy() calls
devlink_region_destroy() to destroy nsim_dev->dummy_region.
So, during nsim_dev_take_snapshot_write(), nsim_dev->dummy_region()
would be removed.
At this point, snapshot_write() would access freed pointer.
In order to fix this case, take_snapshot file will be removed before
devlink_region_destroy().
The take_snapshot file will be re-created by ->reload_up().

2. del_device_store case
del_device_store() also could call nsim_dev_reload_destroy()
during nsim_dev_take_snapshot_write(). If so, panic would occur.
This problem is actually the same problem with the first case.
So, this problem will be fixed by the first case's solution.

Test commands:
    modprobe netdevsim
    while :
    do
        echo 1 > /sys/bus/netdevsim/new_device &
        echo 1 > /sys/bus/netdevsim/del_device &
	devlink dev reload netdevsim/netdevsim1 &
	echo 1 > /sys/kernel/debug/netdevsim/netdevsim1/take_snapshot &
    done

Splat looks like:
[   45.564513][  T975] general protection fault, probably for non-canonical address 0xdffffc000000003a: 0000 [#1] SMP DEI
[   45.566131][  T975] KASAN: null-ptr-deref in range [0x00000000000001d0-0x00000000000001d7]
[   45.566135][  T975] CPU: 1 PID: 975 Comm: bash Not tainted 5.5.0+ #322
[   45.569020][  T975] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   45.569026][  T975] RIP: 0010:__mutex_lock+0x10a/0x14b0
[   45.570518][  T975] Code: 08 84 d2 0f 85 7f 12 00 00 44 8b 0d 10 23 65 02 45 85 c9 75 29 49 8d 7f 68 48 b8 00 00 00 0f
[   45.570522][  T975] RSP: 0018:ffff888046ccfbf0 EFLAGS: 00010206
[   45.572305][  T975] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
[   45.572308][  T975] RDX: 000000000000003a RSI: ffffffffac926440 RDI: 00000000000001d0
[   45.576843][  T975] RBP: ffff888046ccfd70 R08: ffffffffab610645 R09: 0000000000000000
[   45.576847][  T975] R10: ffff888046ccfd90 R11: ffffed100d6360ad R12: 0000000000000000
[   45.578471][  T975] R13: dffffc0000000000 R14: ffffffffae1976c0 R15: 0000000000000168
[   45.578475][  T975] FS:  00007f614d6e7740(0000) GS:ffff88806c400000(0000) knlGS:0000000000000000
[   45.581492][  T975] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   45.582942][  T975] CR2: 00005618677d1cf0 CR3: 000000005fb9c002 CR4: 00000000000606e0
[   45.584543][  T975] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   45.586633][  T975] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   45.589889][  T975] Call Trace:
[   45.591445][  T975]  ? devlink_region_snapshot_create+0x55/0x4a0
[   45.601250][  T975]  ? mutex_lock_io_nested+0x1380/0x1380
[   45.602817][  T975]  ? mutex_lock_io_nested+0x1380/0x1380
[   45.603875][  T975]  ? mark_held_locks+0xa5/0xe0
[   45.604769][  T975]  ? _raw_spin_unlock_irqrestore+0x2d/0x50
[   45.606147][  T975]  ? __mutex_unlock_slowpath+0xd0/0x670
[   45.607723][  T975]  ? crng_backtrack_protect+0x80/0x80
[   45.613530][  T975]  ? wait_for_completion+0x390/0x390
[   45.615152][  T975]  ? devlink_region_snapshot_create+0x55/0x4a0
[   45.616834][  T975]  devlink_region_snapshot_create+0x55/0x4a0
[ ... ]

Fixes: 4418f862d6 ("netdevsim: implement support for devlink region and snapshots")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03 15:32:20 -08:00
Taehee Yoo 6ab63366e1 netdevsim: disable devlink reload when resources are being used
devlink reload destroys resources and allocates resources again.
So, when devices and ports resources are being used, devlink reload
function should not be executed. In order to avoid this race, a new
lock is added and new_port() and del_port() call devlink_reload_disable()
and devlink_reload_enable().

Thread0                      Thread1
{new/del}_port()             {new/del}_port()
devlink_reload_disable()
                             devlink_reload_disable()
devlink_reload_enable()
                             //here
                             devlink_reload_enable()

Before Thread1's devlink_reload_enable(), the devlink is already allowed
to execute reload because Thread0 allows it. devlink reload disable/enable
variable type is bool. So the above case would exist.
So, disable/enable should be executed atomically.
In order to do that, a new lock is used.

Test commands:
    modprobe netdevsim
    echo 1 > /sys/bus/netdevsim/new_device
    while :
    do
        echo 1 > /sys/devices/netdevsim1/new_port &
        echo 1 > /sys/devices/netdevsim1/del_port &
        devlink dev reload netdevsim/netdevsim1 &
    done

Splat looks like:
[   23.342145][  T932] DEBUG_LOCKS_WARN_ON(mutex_is_locked(lock))
[   23.342159][  T932] WARNING: CPU: 0 PID: 932 at kernel/locking/mutex-debug.c:103 mutex_destroy+0xc7/0xf0
[   23.344182][  T932] Modules linked in: netdevsim openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_dx
[   23.346485][  T932] CPU: 0 PID: 932 Comm: devlink Not tainted 5.5.0+ #322
[   23.347696][  T932] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   23.348893][  T932] RIP: 0010:mutex_destroy+0xc7/0xf0
[   23.349505][  T932] Code: e0 07 83 c0 03 38 d0 7c 04 84 d2 75 2e 8b 05 00 ac b0 02 85 c0 75 8b 48 c7 c6 00 5e 07 96 40
[   23.351887][  T932] RSP: 0018:ffff88806208f810 EFLAGS: 00010286
[   23.353963][  T932] RAX: dffffc0000000008 RBX: ffff888067f6f2c0 RCX: ffffffff942c4bd4
[   23.355222][  T932] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff96dac5b4
[   23.356169][  T932] RBP: ffff888067f6f000 R08: fffffbfff2d235a5 R09: fffffbfff2d235a5
[   23.357160][  T932] R10: 0000000000000001 R11: fffffbfff2d235a4 R12: ffff888067f6f208
[   23.358288][  T932] R13: ffff88806208fa70 R14: ffff888067f6f000 R15: ffff888069ce3800
[   23.359307][  T932] FS:  00007fe2a3876740(0000) GS:ffff88806c000000(0000) knlGS:0000000000000000
[   23.360473][  T932] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   23.361319][  T932] CR2: 00005561357aa000 CR3: 000000005227a006 CR4: 00000000000606f0
[   23.362323][  T932] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   23.363417][  T932] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   23.364414][  T932] Call Trace:
[   23.364828][  T932]  nsim_dev_reload_destroy+0x77/0xb0 [netdevsim]
[   23.365655][  T932]  nsim_dev_reload_down+0x84/0xb0 [netdevsim]
[   23.366433][  T932]  devlink_reload+0xb1/0x350
[   23.367010][  T932]  genl_rcv_msg+0x580/0xe90

[ ...]

[   23.531729][ T1305] kernel BUG at lib/list_debug.c:53!
[   23.532523][ T1305] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[   23.533467][ T1305] CPU: 2 PID: 1305 Comm: bash Tainted: G        W         5.5.0+ #322
[   23.534962][ T1305] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   23.536503][ T1305] RIP: 0010:__list_del_entry_valid+0xe6/0x150
[   23.538346][ T1305] Code: 89 ea 48 c7 c7 00 73 1e 96 e8 df f7 4c ff 0f 0b 48 c7 c7 60 73 1e 96 e8 d1 f7 4c ff 0f 0b 44
[   23.541068][ T1305] RSP: 0018:ffff888047c27b58 EFLAGS: 00010282
[   23.542001][ T1305] RAX: 0000000000000054 RBX: ffff888067f6f318 RCX: 0000000000000000
[   23.543051][ T1305] RDX: 0000000000000054 RSI: 0000000000000008 RDI: ffffed1008f84f61
[   23.544072][ T1305] RBP: ffff88804aa0fca0 R08: ffffed100d940539 R09: ffffed100d940539
[   23.545085][ T1305] R10: 0000000000000001 R11: ffffed100d940538 R12: ffff888047c27cb0
[   23.546422][ T1305] R13: ffff88806208b840 R14: ffffffff981976c0 R15: ffff888067f6f2c0
[   23.547406][ T1305] FS:  00007f76c0431740(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000
[   23.548527][ T1305] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   23.549389][ T1305] CR2: 00007f5048f1a2f8 CR3: 000000004b310006 CR4: 00000000000606e0
[   23.550636][ T1305] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   23.551578][ T1305] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   23.552597][ T1305] Call Trace:
[   23.553004][ T1305]  mutex_remove_waiter+0x101/0x520
[   23.553646][ T1305]  __mutex_lock+0xac7/0x14b0
[   23.554218][ T1305]  ? nsim_dev_port_del+0x4e/0x140 [netdevsim]
[   23.554908][ T1305]  ? mutex_lock_io_nested+0x1380/0x1380
[   23.555570][ T1305]  ? _parse_integer+0xf0/0xf0
[   23.556043][ T1305]  ? kstrtouint+0x86/0x110
[   23.556504][ T1305]  ? nsim_dev_port_del+0x4e/0x140 [netdevsim]
[   23.557133][ T1305]  nsim_dev_port_del+0x4e/0x140 [netdevsim]
[   23.558024][ T1305]  del_port_store+0xcc/0xf0 [netdevsim]
[ ... ]

Fixes: 75ba029f3c ("netdevsim: implement proper devlink reload")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03 15:32:20 -08:00
Taehee Yoo f5cd21605e netdevsim: fix using uninitialized resources
When module is being initialized, __init() calls bus_register() and
driver_register().
These functions internally create various resources and sysfs files.
The sysfs files are used for basic operations(add/del device).
/sys/bus/netdevsim/new_device
/sys/bus/netdevsim/del_device

These sysfs files use netdevsim resources, they are mostly allocated
and initialized in ->probe() function, which is nsim_dev_probe().
But, sysfs files could be executed before ->probe() is finished.
So, accessing uninitialized data would occur.

Another problem is very similar.
/sys/bus/netdevsim/new_device internally creates sysfs files.
/sys/devices/netdevsim<id>/new_port
/sys/devices/netdevsim<id>/del_port

These sysfs files also use netdevsim resources, they are mostly allocated
and initialized in creating device routine, which is nsim_bus_dev_new().
But they also could be executed before nsim_bus_dev_new() is finished.
So, accessing uninitialized data would occur.

To fix these problems, this patch adds flags, which means whether the
operation is finished or not.
The flag variable 'nsim_bus_enable' means whether netdevsim bus was
initialized or not.
This is protected by nsim_bus_dev_list_lock.
The flag variable 'nsim_bus_dev->init' means whether nsim_bus_dev was
initialized or not.
This could be used in {new/del}_port_store() with no lock.

Test commands:
    #SHELL1
    modprobe netdevsim
    while :
    do
        echo "1 1" > /sys/bus/netdevsim/new_device
        echo "1 1" > /sys/bus/netdevsim/del_device
    done

    #SHELL2
    while :
    do
        echo 1 > /sys/devices/netdevsim1/new_port
        echo 1 > /sys/devices/netdevsim1/del_port
    done

Splat looks like:
[   47.508954][ T1008] general protection fault, probably for non-canonical address 0xdffffc0000000021: 0000 I
[   47.510793][ T1008] KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f]
[   47.511963][ T1008] CPU: 2 PID: 1008 Comm: bash Not tainted 5.5.0+ #322
[   47.512823][ T1008] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   47.514041][ T1008] RIP: 0010:__mutex_lock+0x10a/0x14b0
[   47.514699][ T1008] Code: 08 84 d2 0f 85 7f 12 00 00 44 8b 0d 10 23 65 02 45 85 c9 75 29 49 8d 7f 68 48 b8 00 00 00 0f
[   47.517163][ T1008] RSP: 0018:ffff888059b4fbb0 EFLAGS: 00010206
[   47.517802][ T1008] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
[   47.518941][ T1008] RDX: 0000000000000021 RSI: ffffffff85926440 RDI: 0000000000000108
[   47.519732][ T1008] RBP: ffff888059b4fd30 R08: ffffffffc073fad0 R09: 0000000000000000
[   47.520729][ T1008] R10: ffff888059b4fd50 R11: ffff88804bb38040 R12: 0000000000000000
[   47.521702][ T1008] R13: dffffc0000000000 R14: ffffffff871976c0 R15: 00000000000000a0
[   47.522760][ T1008] FS:  00007fd4be05a740(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000
[   47.523877][ T1008] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   47.524627][ T1008] CR2: 0000561c82b69cf0 CR3: 0000000065dd6004 CR4: 00000000000606e0
[   47.527662][ T1008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   47.528604][ T1008] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   47.529531][ T1008] Call Trace:
[   47.529874][ T1008]  ? nsim_dev_port_add+0x50/0x150 [netdevsim]
[   47.530470][ T1008]  ? mutex_lock_io_nested+0x1380/0x1380
[   47.531018][ T1008]  ? _kstrtoull+0x76/0x160
[   47.531449][ T1008]  ? _parse_integer+0xf0/0xf0
[   47.531874][ T1008]  ? kernfs_fop_write+0x1cf/0x410
[   47.532330][ T1008]  ? sysfs_file_ops+0x160/0x160
[   47.532773][ T1008]  ? kstrtouint+0x86/0x110
[   47.533168][ T1008]  ? nsim_dev_port_add+0x50/0x150 [netdevsim]
[   47.533721][ T1008]  nsim_dev_port_add+0x50/0x150 [netdevsim]
[   47.534336][ T1008]  ? sysfs_file_ops+0x160/0x160
[   47.534858][ T1008]  new_port_store+0x99/0xb0 [netdevsim]
[   47.535439][ T1008]  ? del_port_store+0xb0/0xb0 [netdevsim]
[   47.536035][ T1008]  ? sysfs_file_ops+0x112/0x160
[   47.536544][ T1008]  ? sysfs_kf_write+0x3b/0x180
[   47.537029][ T1008]  kernfs_fop_write+0x276/0x410
[   47.537548][ T1008]  ? __sb_start_write+0x215/0x2e0
[   47.538110][ T1008]  vfs_write+0x197/0x4a0
[ ... ]

Fixes: f9d9db47d3 ("netdevsim: add bus attributes to add new and delete devices")
Fixes: 794b2c05ca ("netdevsim: extend device attrs to support port addition and deletion")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03 15:32:20 -08:00
Jakub Kicinski 2b5ea2947f Merge branch 'bnxt_en-Bug-fixes'
Michael Chan says:

=====================
bnxt_en: Bug fixes

3 patches that fix some issues in the firmware reset logic, starting
with a small patch to refactor the code that re-enables SRIOV.  The
last patch fixes a TC queue mapping issue.
====================

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03 15:07:26 -08:00
Michael Chan 18e4960c18 bnxt_en: Fix TC queue mapping.
The driver currently only calls netdev_set_tc_queue when the number of
TCs is greater than 1.  Instead, the comparison should be greater than
or equal to 1.  Even with 1 TC, we need to set the queue mapping.

This bug can cause warnings when the number of TCs is changed back to 1.

Fixes: 7809592d3e ("bnxt_en: Enable MSIX early in bnxt_init_one().")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03 15:06:45 -08:00
Vasundhara Volam d407302895 bnxt_en: Fix logic that disables Bus Master during firmware reset.
The current logic that calls pci_disable_device() in __bnxt_close_nic()
during firmware reset is flawed.  If firmware is still alive, we're
disabling the device too early, causing some firmware commands to
not reach the firmware.

Fix it by moving the logic to bnxt_reset_close().  If firmware is
in fatal condition, we call pci_disable_device() before we free
any of the rings to prevent DMA corruption of the freed rings.  If
firmware is still alive, we call pci_disable_device() after the
last firmware message has been sent.

Fixes: 3bc7d4a352 ("bnxt_en: Add BNXT_STATE_IN_FW_RESET state.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03 15:06:45 -08:00
Michael Chan 12de2eadf8 bnxt_en: Fix RDMA driver failure with SRIOV after firmware reset.
bnxt_ulp_start() needs to be called before SRIOV is re-enabled after
firmware reset.  Re-enabling SRIOV may consume all the resources and
may cause the RDMA driver to fail to get MSIX and other resources.
Fix it by calling bnxt_ulp_start() first before calling
bnxt_reenable_sriov().

We re-arrange the logic so that we call bnxt_ulp_start() and
bnxt_reenable_sriov() in proper sequence in bnxt_fw_reset_task() and
bnxt_open().  The former is the normal coordinated firmware reset sequence
and the latter is firmware reset while the function is down.  This new
logic is now more straight forward and will now fix both scenarios.

Fixes: f3a6d206c2 ("bnxt_en: Call bnxt_ulp_stop()/bnxt_ulp_start() during error recovery.")
Reported-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03 15:06:45 -08:00
Michael Chan c16d4ee0e3 bnxt_en: Refactor logic to re-enable SRIOV after firmware reset detected.
Put the current logic in bnxt_open() to re-enable SRIOV after detecting
firmware reset into a new function bnxt_reenable_sriov().  This call
needs to be invoked in the firmware reset path also in the next patch.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03 15:06:45 -08:00
Nicolin Chen 14b41a2959 net: stmmac: Delete txtimer in suspend()
When running v5.5 with a rootfs on NFS, memory abort may happen in
the system resume stage:
 Unable to handle kernel paging request at virtual address dead00000000012a
 [dead00000000012a] address between user and kernel address ranges
 pc : run_timer_softirq+0x334/0x3d8
 lr : run_timer_softirq+0x244/0x3d8
 x1 : ffff800011cafe80 x0 : dead000000000122
 Call trace:
  run_timer_softirq+0x334/0x3d8
  efi_header_end+0x114/0x234
  irq_exit+0xd0/0xd8
  __handle_domain_irq+0x60/0xb0
  gic_handle_irq+0x58/0xa8
  el1_irq+0xb8/0x180
  arch_cpu_idle+0x10/0x18
  do_idle+0x1d8/0x2b0
  cpu_startup_entry+0x24/0x40
  secondary_start_kernel+0x1b4/0x208
 Code: f9000693 a9400660 f9000020 b4000040 (f9000401)
 ---[ end trace bb83ceeb4c482071 ]---
 Kernel panic - not syncing: Fatal exception in interrupt
 SMP: stopping secondary CPUs
 SMP: failed to stop secondary CPUs 2-3
 Kernel Offset: disabled
 CPU features: 0x00002,2300aa30
 Memory Limit: none
 ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

It's found that stmmac_xmit() and stmmac_resume() sometimes might
run concurrently, possibly resulting in a race condition between
mod_timer() and setup_timer(), being called by stmmac_xmit() and
stmmac_resume() respectively.

Since the resume() runs setup_timer() every time, it'd be safer to
have del_timer_sync() in the suspend() as the counterpart.

Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03 15:01:22 -08:00
Jakub Kicinski 3d80c653f9 RxRPC fixes
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEqG5UsNXhtOCrfGQP+7dXa6fLC2sFAl439W0ACgkQ+7dXa6fL
 C2uT5RAAl+rytJS768Aa6c/S9TPBaNOKzFQmgNaWzAtgC5BAtfZf1Bl0okFOba2V
 QtcFmTogRl7BEnf9S3w3z25qj7Nv5udjIaAbH7cO6j1vuIwRpvtEZ7WXlE3L4hxA
 DscSysqI9L5ISsnzfloUvA/biA9azsH2ckgMxFo++YmLHvagXW0lmkE4yZw+aZ/T
 DstFAMAnFQwEAyu+Et3bo32/382aJh+gBGgV/2wuHBPgzQMhiWdosKdNnEZtZ3V2
 HvgVuAU2V4hOf8OuaPuBnZrJPondTq5e1W+5mQiYLYzTCTOs6rZ1gUGfEXth3d1H
 ABJ0FoyPgN783msb0yL6OOLMWiTc9USiLB8a3U2vJOD+hQTkPSYSGsCObeIGVW/Y
 dbBd5fwudF78LIP9TjYWbau3vHtV73N4Mc1UT219jew0+Hi1ik5VIj8q0wdBIkzm
 vKcVznXnPReOUBVKmqA2scnXs8EA4w6bTCjyd3JYUBK2qLchz366s+0oYyIK8Nq0
 dy8TVISaCSfohI4nAYAv90AUIDa+zdHKuttBsAD90yVM/wrnokqc/RonfWjHs32k
 SerM0RclPidool3Hkc/w0uvPywDQg/S5sKAW6E6lpfTppOwIY0wq/yZc5N2d9FZV
 UrPZVGhQszC7AM/CBKXDT0ZMrPnAfGO8PMPLyFrAcv2p9O7XuWA=
 =kHIG
 -----END PGP SIGNATURE-----

Merge tag 'rxrpc-fixes-20200203' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

David Howells says:

====================
RxRPC fixes

Here are a number of fixes for AF_RXRPC:

 (1) Fix a potential use after free in rxrpc_put_local() where it was
     accessing the object just put to get tracing information.

 (2) Fix insufficient notifications being generated by the function that
     queues data packets on a call.  This occasionally causes recvmsg() to
     stall indefinitely.

 (3) Fix a number of packet-transmitting work functions to hold an active
     count on the local endpoint so that the UDP socket doesn't get
     destroyed whilst they're calling kernel_sendmsg() on it.

 (4) Fix a NULL pointer deref that stemmed from a call's connection pointer
     being cleared when the call was disconnected.

Changes:

 v2: Removed a couple of BUG() statements that got added.
====================

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03 10:26:23 -08:00
David Howells 5273a191dc rxrpc: Fix NULL pointer deref due to call->conn being cleared on disconnect
When a call is disconnected, the connection pointer from the call is
cleared to make sure it isn't used again and to prevent further attempted
transmission for the call.  Unfortunately, there might be a daemon trying
to use it at the same time to transmit a packet.

Fix this by keeping call->conn set, but setting a flag on the call to
indicate disconnection instead.

Remove also the bits in the transmission functions where the conn pointer is
checked and a ref taken under spinlock as this is now redundant.

Fixes: 8d94aa381d ("rxrpc: Calls shouldn't hold socket refs")
Signed-off-by: David Howells <dhowells@redhat.com>
2020-02-03 10:25:30 +00:00
Jakub Kicinski 83d0585f91 Merge branch 'Fix-reconnection-latency-caused-by-FIN-ACK-handling-race'
SeongJae Park says:

====================
Fix reconnection latency caused by FIN/ACK handling race

The first patch fixes the problem by adjusting the first resend delay of
the SYN in the case.  The second one adds a user space test to reproduce
this problem.

From v2
(https://lore.kernel.org/linux-kselftest/20200201071859.4231-1-sj38.park@gmail.com/)
 - Use TCP_TIMEOUT_MIN as reduced delay (Neal Cardwall)
 - Add Reviewed-by and Signed-off-by from Eric Dumazet

From v1
(https://lore.kernel.org/linux-kselftest/20200131122421.23286-1-sjpark@amazon.com/)
 - Drop the trivial comment fix patch (Eric Dumazet)
 - Limit the delay adjustment to only the first SYN resend (Eric Dumazet)
 - selftest: Avoid use of hard-coded port number (Eric Dumazet)
 - Explain RST/ACK and FIN/ACK has no big difference (Neal Cardwell)
====================

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-02 13:45:05 -08:00
SeongJae Park af8c8a450b selftests: net: Add FIN_ACK processing order related latency spike test
This commit adds a test for FIN_ACK process races related reconnection
latency spike issues.  The issue has described and solved by the
previous commit ("tcp: Reduce SYN resend delay if a suspicous ACK is
received").

The test program is configured with a server and a client process.  The
server creates and binds a socket to a port that dynamically allocated,
listen on it, and start a infinite loop.  Inside the loop, it accepts
connection, reads 4 bytes from the socket, and closes the connection.
The client is constructed as an infinite loop.  Inside the loop, it
creates a socket with LINGER and NODELAY option, connect to the server,
send 4 bytes data, try read some data from server.  After the read()
returns, it measure the latency from the beginning of this loop to this
point and if the latency is larger than 1 second (spike), print a
message.

Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-02 13:33:21 -08:00
SeongJae Park 9603d47bad tcp: Reduce SYN resend delay if a suspicous ACK is received
When closing a connection, the two acks that required to change closing
socket's status to FIN_WAIT_2 and then TIME_WAIT could be processed in
reverse order.  This is possible in RSS disabled environments such as a
connection inside a host.

For example, expected state transitions and required packets for the
disconnection will be similar to below flow.

	 00 (Process A)				(Process B)
	 01 ESTABLISHED				ESTABLISHED
	 02 close()
	 03 FIN_WAIT_1
	 04 		---FIN-->
	 05 					CLOSE_WAIT
	 06 		<--ACK---
	 07 FIN_WAIT_2
	 08 		<--FIN/ACK---
	 09 TIME_WAIT
	 10 		---ACK-->
	 11 					LAST_ACK
	 12 CLOSED				CLOSED

In some cases such as LINGER option applied socket, the FIN and FIN/ACK
will be substituted to RST and RST/ACK, but there is no difference in
the main logic.

The acks in lines 6 and 8 are the acks.  If the line 8 packet is
processed before the line 6 packet, it will be just ignored as it is not
a expected packet, and the later process of the line 6 packet will
change the status of Process A to FIN_WAIT_2, but as it has already
handled line 8 packet, it will not go to TIME_WAIT and thus will not
send the line 10 packet to Process B.  Thus, Process B will left in
CLOSE_WAIT status, as below.

	 00 (Process A)				(Process B)
	 01 ESTABLISHED				ESTABLISHED
	 02 close()
	 03 FIN_WAIT_1
	 04 		---FIN-->
	 05 					CLOSE_WAIT
	 06 				(<--ACK---)
	 07	  			(<--FIN/ACK---)
	 08 				(fired in right order)
	 09 		<--FIN/ACK---
	 10 		<--ACK---
	 11 		(processed in reverse order)
	 12 FIN_WAIT_2

Later, if the Process B sends SYN to Process A for reconnection using
the same port, Process A will responds with an ACK for the last flow,
which has no increased sequence number.  Thus, Process A will send RST,
wait for TIMEOUT_INIT (one second in default), and then try
reconnection.  If reconnections are frequent, the one second latency
spikes can be a big problem.  Below is a tcpdump results of the problem:

    14.436259 IP 127.0.0.1.45150 > 127.0.0.1.4242: Flags [S], seq 2560603644
    14.436266 IP 127.0.0.1.4242 > 127.0.0.1.45150: Flags [.], ack 5, win 512
    14.436271 IP 127.0.0.1.45150 > 127.0.0.1.4242: Flags [R], seq 2541101298
    /* ONE SECOND DELAY */
    15.464613 IP 127.0.0.1.45150 > 127.0.0.1.4242: Flags [S], seq 2560603644

This commit mitigates the problem by reducing the delay for the next SYN
if the suspicous ACK is received while in SYN_SENT state.

Following commit will add a selftest, which can be also helpful for
understanding of this issue.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-02 13:33:21 -08:00
Lukas Bulwahn dff6bc1bfd MAINTAINERS: correct entries for ISDN/mISDN section
Commit 6d97985072 ("isdn: move capi drivers to staging") cleaned up the
isdn drivers and split the MAINTAINERS section for ISDN, but missed to add
the terminal slash for the two directories mISDN and hardware. Hence, all
files in those directories were not part of the new ISDN/mISDN SUBSYSTEM,
but were considered to be part of "THE REST".

Rectify the situation, and while at it, also complete the section with two
further build files that belong to that subsystem.

This was identified with a small script that finds all files belonging to
"THE REST" according to the current MAINTAINERS file, and I investigated
upon its output.

Fixes: 6d97985072 ("isdn: move capi drivers to staging")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-02 12:40:08 -08:00
Jakub Kicinski b7c3a17c60 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Fix suspicious RCU usage in ipset, from Jozsef Kadlecsik.

2) Use kvcalloc, from Joe Perches.

3) Flush flowtable hardware workqueue after garbage collection run,
   from Paul Blakey.

4) Missing flowtable hardware workqueue flush from nf_flow_table_free(),
   also from Paul.

5) Restore NF_FLOW_HW_DEAD in flow_offload_work_del(), from Paul.

6) Flowtable documentation fixes, from Matteo Croce.
====================

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-01 12:38:20 -08:00
Eric Dumazet cb3c0e6bdf cls_rsvp: fix rsvp_policy
NLA_BINARY can be confusing, since .len value represents
the max size of the blob.

cls_rsvp really wants user space to provide long enough data
for TCA_RSVP_DST and TCA_RSVP_SRC attributes.

BUG: KMSAN: uninit-value in rsvp_get net/sched/cls_rsvp.h:258 [inline]
BUG: KMSAN: uninit-value in gen_handle net/sched/cls_rsvp.h:402 [inline]
BUG: KMSAN: uninit-value in rsvp_change+0x1ae9/0x4220 net/sched/cls_rsvp.h:572
CPU: 1 PID: 13228 Comm: syz-executor.1 Not tainted 5.5.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c9/0x220 lib/dump_stack.c:118
 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118
 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
 rsvp_get net/sched/cls_rsvp.h:258 [inline]
 gen_handle net/sched/cls_rsvp.h:402 [inline]
 rsvp_change+0x1ae9/0x4220 net/sched/cls_rsvp.h:572
 tc_new_tfilter+0x31fe/0x5010 net/sched/cls_api.c:2104
 rtnetlink_rcv_msg+0xcb7/0x1570 net/core/rtnetlink.c:5415
 netlink_rcv_skb+0x451/0x650 net/netlink/af_netlink.c:2477
 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:5442
 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
 netlink_unicast+0xf9e/0x1100 net/netlink/af_netlink.c:1328
 netlink_sendmsg+0x1248/0x14d0 net/netlink/af_netlink.c:1917
 sock_sendmsg_nosec net/socket.c:639 [inline]
 sock_sendmsg net/socket.c:659 [inline]
 ____sys_sendmsg+0x12b6/0x1350 net/socket.c:2330
 ___sys_sendmsg net/socket.c:2384 [inline]
 __sys_sendmsg+0x451/0x5f0 net/socket.c:2417
 __do_sys_sendmsg net/socket.c:2426 [inline]
 __se_sys_sendmsg+0x97/0xb0 net/socket.c:2424
 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424
 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45b349
Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f269d43dc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f269d43e6d4 RCX: 000000000045b349
RDX: 0000000000000000 RSI: 00000000200001c0 RDI: 0000000000000003
RBP: 000000000075bfc8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00000000000009c2 R14: 00000000004cb338 R15: 000000000075bfd4

Uninit was created at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline]
 kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127
 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:82
 slab_alloc_node mm/slub.c:2774 [inline]
 __kmalloc_node_track_caller+0xb40/0x1200 mm/slub.c:4382
 __kmalloc_reserve net/core/skbuff.c:141 [inline]
 __alloc_skb+0x2fd/0xac0 net/core/skbuff.c:209
 alloc_skb include/linux/skbuff.h:1049 [inline]
 netlink_alloc_large_skb net/netlink/af_netlink.c:1174 [inline]
 netlink_sendmsg+0x7d3/0x14d0 net/netlink/af_netlink.c:1892
 sock_sendmsg_nosec net/socket.c:639 [inline]
 sock_sendmsg net/socket.c:659 [inline]
 ____sys_sendmsg+0x12b6/0x1350 net/socket.c:2330
 ___sys_sendmsg net/socket.c:2384 [inline]
 __sys_sendmsg+0x451/0x5f0 net/socket.c:2417
 __do_sys_sendmsg net/socket.c:2426 [inline]
 __se_sys_sendmsg+0x97/0xb0 net/socket.c:2424
 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424
 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 6fa8c0144b ("[NET_SCHED]: Use nla_policy for attribute validation in classifiers")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-01 12:25:06 -08:00
Sven Eckelmann e8d5bb4dfa MAINTAINERS: Orphan HSR network protocol
The current maintainer Arvid Brodin <arvid.brodin@alten.se> hasn't
contributed to the kernel since 2015-02-27. His company mail address is
also bouncing and the company confirmed (2020-01-31) that no Arvid Brodin
is working for them:

> Vi har dessvärre ingen  Arvid Brodin som arbetar på ALTEN.

A MIA person cannot be the maintainer. It is better to mark is as orphaned
until some other person can jump in and take over the responsibility for
HSR.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-01 11:45:57 -08:00
Dan Carpenter d32a06f543 qed: Fix a error code in qed_hw_init()
If the qed_fw_overlay_mem_alloc() then we should return -ENOMEM instead
of success.

Fixes: 30d5f85895 ("qed: FW 8.42.2.0 Add fw overlay feature")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-01 11:35:17 -08:00
Dan Carpenter 08ff78182f octeontx2-pf: Fix an IS_ERR() vs NULL bug
The otx2_mbox_get_rsp() function never returns NULL, it returns error
pointers on error.

Fixes: 34bfe0ebed ("octeontx2-pf: MTU, MAC and RX mode config support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-01 11:32:43 -08:00
Eric Dumazet 784f8344de tcp: clear tp->segs_{in|out} in tcp_disconnect()
tp->segs_in and tp->segs_out need to be cleared in tcp_disconnect().

tcp_disconnect() is rarely used, but it is worth fixing it.

Fixes: 2efd055c53 ("tcp: add tcpi_segs_in and tcpi_segs_out to tcp_info")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Marcelo Ricardo Leitner <mleitner@redhat.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-31 22:12:37 -08:00
Eric Dumazet db7ffee6f3 tcp: clear tp->data_segs{in|out} in tcp_disconnect()
tp->data_segs_in and tp->data_segs_out need to be cleared
in tcp_disconnect().

tcp_disconnect() is rarely used, but it is worth fixing it.

Fixes: a44d6eacda ("tcp: Add RFC4898 tcpEStatsPerfDataSegsOut/In")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-31 22:12:22 -08:00
Eric Dumazet 2fbdd56251 tcp: clear tp->delivered in tcp_disconnect()
tp->delivered needs to be cleared in tcp_disconnect().

tcp_disconnect() is rarely used, but it is worth fixing it.

Fixes: ddf1af6fa0 ("tcp: new delivery accounting")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-31 22:12:18 -08:00
Eric Dumazet c13c48c00a tcp: clear tp->total_retrans in tcp_disconnect()
total_retrans needs to be cleared in tcp_disconnect().

tcp_disconnect() is rarely used, but it is worth fixing it.

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: SeongJae Park <sjpark@amazon.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-31 22:11:35 -08:00
Matteo Croce 78e06cf430 netfilter: nf_flowtable: fix documentation
In the flowtable documentation there is a missing semicolon, the command
as is would give this error:

    nftables.conf:5:27-33: Error: syntax error, unexpected devices, expecting newline or semicolon
                    hook ingress priority 0 devices = { br0, pppoe-data };
                                            ^^^^^^^
    nftables.conf:4:12-13: Error: invalid hook (null)
            flowtable ft {
                      ^^

Fixes: 19b351f16f ("netfilter: add flowtable documentation")
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-01-31 19:31:42 +01:00
Paul Blakey c22208b7ce netfilter: flowtable: Fix setting forgotten NF_FLOW_HW_DEAD flag
During the refactor this was accidently removed.

Fixes: ae29045018 ("netfilter: flowtable: add nf_flow_offload_tuple() helper")
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-01-31 19:31:42 +01:00
Paul Blakey 0f34f30a1b netfilter: flowtable: Fix missing flush hardware on table free
If entries exist when freeing a hardware offload enabled table,
we queue work for hardware while running the gc iteration.

Execute it (flush) after queueing.

Fixes: c29f74e0df ("netfilter: nf_flow_table: hardware offload support")
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-01-31 19:31:41 +01:00
Paul Blakey 91bfaa15a3 netfilter: flowtable: Fix hardware flush order on nf_flow_table_cleanup
On netdev down event, nf_flow_table_cleanup() is called for the relevant
device and it cleans all the tables that are on that device.
If one of those tables has hardware offload flag,
nf_flow_table_iterate_cleanup flushes hardware and then runs the gc.
But the gc can queue more hardware work, which will take time to execute.

Instead first add the work, then flush it, to execute it now.

Fixes: c29f74e0df ("netfilter: nf_flow_table: hardware offload support")
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-01-31 19:31:40 +01:00
Joe Perches b9e0102a57 netfilter: Use kvcalloc
Convert the uses of kvmalloc_array with __GFP_ZERO to
the equivalent kvcalloc.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-01-31 19:30:54 +01:00
Nathan Chancellor 91a7d4bf3e mlxsw: spectrum_qdisc: Fix 64-bit division error in mlxsw_sp_qdisc_tbf_rate_kbps
When building arm32 allmodconfig:

ERROR: "__aeabi_uldivmod"
[drivers/net/ethernet/mellanox/mlxsw/mlxsw_spectrum.ko] undefined!

rate_bytes_ps has type u64, we need to use a 64-bit division helper to
avoid a build error.

Fixes: a44f58c41b ("mlxsw: spectrum_qdisc: Support offloading of TBF Qdisc")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-31 08:52:41 -08:00
Shannon Nelson b5ce31b5e1 ionic: fix rxq comp packet type mask
Be sure to include all the packet type bits in the mask.

Fixes: fbfb803153 ("ionic: Add hardware init and device commands")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-31 08:43:05 -08:00
Michael Walle 2318ca8aef net: phy: at803x: disable vddio regulator
The probe() might enable a VDDIO regulator, which needs to be disabled
again before calling regulator_put(). Add a remove() function.

Fixes: 2f664823a4 ("net: phy: at803x: add device tree binding")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-31 07:54:48 -08:00
Michael Walle 2e1bf3a765 net: mii_timestamper: fix static allocation by PHY driver
If phydev->mii_ts is set by the PHY driver, it will always be
overwritten in of_mdiobus_register_phy(). Fix it. Also make sure, that
the unregister() doesn't do anything if the mii_timestamper was provided by
the PHY driver.

Fixes: 1dca22b184 ("net: mdio: of: Register discovered MII time stampers.")
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-31 07:46:11 -08:00
Michael Walle 0e0daf6ac3 net: mdio: of: fix potential NULL pointer derefernce
of_find_mii_timestamper() returns NULL if no timestamper is found.
Therefore, guard the unregister_mii_timestamper() calls.

Fixes: 1dca22b184 ("net: mdio: of: Register discovered MII time stampers.")
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-31 07:46:11 -08:00
David Howells 04d36d748f rxrpc: Fix missing active use pinning of rxrpc_local object
The introduction of a split between the reference count on rxrpc_local
objects and the usage count didn't quite go far enough.  A number of kernel
work items need to make use of the socket to perform transmission.  These
also need to get an active count on the local object to prevent the socket
from being closed.

Fix this by getting the active count in those places.

Also split out the raw active count get/put functions as these places tend
to hold refs on the rxrpc_local object already, so getting and putting an
extra object ref is just a waste of time.

The problem can lead to symptoms like:

    BUG: kernel NULL pointer dereference, address: 0000000000000018
    ..
    CPU: 2 PID: 818 Comm: kworker/u9:0 Not tainted 5.5.0-fscache+ #51
    ...
    RIP: 0010:selinux_socket_sendmsg+0x5/0x13
    ...
    Call Trace:
     security_socket_sendmsg+0x2c/0x3e
     sock_sendmsg+0x1a/0x46
     rxrpc_send_keepalive+0x131/0x1ae
     rxrpc_peer_keepalive_worker+0x219/0x34b
     process_one_work+0x18e/0x271
     worker_thread+0x1a3/0x247
     kthread+0xe6/0xeb
     ret_from_fork+0x1f/0x30

Fixes: 730c5fd42c ("rxrpc: Fix local endpoint refcounting")
Signed-off-by: David Howells <dhowells@redhat.com>
2020-01-30 21:50:41 +00:00
David Howells f71dbf2fb2 rxrpc: Fix insufficient receive notification generation
In rxrpc_input_data(), rxrpc_notify_socket() is called if the base sequence
number of the packet is immediately following the hard-ack point at the end
of the function.  However, this isn't sufficient, since the recvmsg side
may have been advancing the window and then overrun the position in which
we're adding - at which point rx_hard_ack >= seq0 and no notification is
generated.

Fix this by always generating a notification at the end of the input
function.

Without this, a long call may stall, possibly indefinitely.

Fixes: 248f219cb8 ("rxrpc: Rewrite the data and ack handling code")
Signed-off-by: David Howells <dhowells@redhat.com>
2020-01-30 21:50:41 +00:00
David Howells fac20b9e73 rxrpc: Fix use-after-free in rxrpc_put_local()
Fix rxrpc_put_local() to not access local->debug_id after calling
atomic_dec_return() as, unless that returned n==0, we no longer have the
right to access the object.

Fixes: 06d9532fa6 ("rxrpc: Fix read-after-free in rxrpc_queue_local()")
Signed-off-by: David Howells <dhowells@redhat.com>
2020-01-30 21:50:41 +00:00
Linus Torvalds 9f68e3655a drm pull for 5.6-rc1
uapi:
 - dma-buf heaps added (and fixed)
 - command line add support for panel oreientation
 - command line allow overriding penguin count
 
 drm:
 - mipi dsi definition updates
 - lockdep annotations for dma_resv
 - remove dma-buf kmap/kunmap support
 - constify fb_ops in all fbdev drivers
 - MST fix for daisy chained hotplug-
 - CTA-861-G modes with VIC >= 193 added
 - fix drm_panel_of_backlight export
 - LVDS decoder support
 - more device based logging support
 - scanline alighment for dumb buffers
 - MST DSC helpers
 
 scheduler:
 - documentation fixes
 - job distribution improvements
 
 panel:
 - Logic PD type 28 panel support
 - Jimax8729d MIPI-DSI
 - igenic JZ4770
 - generic DSI devicetree bindings
 - sony acx424AKP panel
 - Leadtek LTK500HD1829
 - xinpeng XPP055C272
 - AUO B116XAK01
 - GiantPlus GPM940B0
 - BOE NV140FHM-N49
 - Satoz SAT050AT40H12R2
 - Sharp LS020B1DD01D panels.
 
 ttm:
 - use blocking WW lock
 
 i915:
 - hw/uapi state separation
 - Lock annotation improvements
 - selftest improvements
 - ICL/TGL DSI VDSC support
 - VBT parsing improvments
 - Display refactoring
 - DSI updates + fixes
 - HDCP 2.2 for CFL
 - CML PCI ID fixes
 - GLK+ fbc fix
 - PSR fixes
 - GEN/GT refactor improvments
 - DP MST fixes
 - switch context id alloc to xarray
 - workaround updates
 - LMEM debugfs support
 - tiled monitor fixes
 - ICL+ clock gating programming removed
 - DP MST disable sequence fixed
 - LMEM discontiguous object maps
 - prefaulting for discontiguous objects
 - use LMEM for dumb buffers if possible
 - add LMEM mmap support
 
 amdgpu:
 - enable sync object timelines for vulkan
 - MST atomic routines
 - enable MST DSC support
 - add DMCUB display microengine support
 - DC OEM i2c support
 - Renoir DC fixes
 - Initial HDCP 2.x support
 - BACO support for Arcturus
 - Use BACO for runtime PM power save
 - gfxoff on navi10
 - gfx10 golden updates and fixes
 - DCN support on POWER
 - GFXOFF for raven1 refresh
 - MM engine idle handlers cleanup
 - 10bpc EDP panel fixes
 - renoir watermark fixes
 - SR-IOV fixes
 - Arcturus VCN fixes
 - GDDR6 training fixes
 - freesync fixes
 - Pollock support
 
 amdkfd:
 - unify more codepath with amdgpu
 - use KIQ to setup HIQ rather than MMIO
 
 radeon:
 - fix vma fault handler race
 - PPC DMA fix
 - register check fixes for r100/r200
 
 nouveau:
 - mmap_sem vs dma_resv fix
 - rewrite the ACR secure boot code for Turing
 - TU10x graphics engine support (TU11x pending)
 - Page kind mapping for turing
 - 10-bit LUT support
 - GP10B Tegra fixes
 - HD audio regression fix
 
 hisilicon/hibmc:
 - use generic fbdev code and helpers
 
 rockchip:
 - dsi/px30 support
 
 virtio:
 - fb damage support
 - static some functions
 
 vc4:
 - use dma_resv lock wrappers
 
 msm:
 - use dma_resv lock wrappers
 - sc7180 display + DSI support
 - a618 support
 - UBWC support improvements
 
 vmwgfx:
 - updates + new logging uapi
 
 exynos:
 - enable/disable callback cleanups
 
 etnaviv:
 - use dma_resv lock wrappers
 
 atmel-hlcdc:
 - clock fixes
 
 mediatek:
 - cmdq support
 - non-smooth cursor fixes
 - ctm property support
 
 sun4i:
 - suspend support
 - A64 mipi dsi support
 
 rcar-du:
 - Color management module support
 - LVDS encoder dual-link support
 - R8A77980 support
 
 analogic:
 - add support for an6345
 
 ast:
 - atomic modeset support
 - primary plane garbage fix
 
 arcgpu:
 - fixes for fourcc handling
 
 tegra:
 - minor fixes and improvments
 
 mcde:
 - vblank support
 
 meson:
 - OSD1 plane AFBC commit
 
 gma500:
 - add pageflip support
 - reomve global drm_dev
 
 komeda:
 - tweak debugfs output
 - d32 support
 - runtime PM suppotr
 
 udl:
 - use generic shmem helpers
 - cleanup and fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJeMm6RAAoJEAx081l5xIa+vN8P/0j4jEOv+KIinAhoH+LG3EpD
 m2TUuu5OQIoBrcCoWOgFBk3wqYpw6PdMBdkXh+5sE5lfeBynp8oC3Bin+QsHJE05
 eGBpZtHe+70MQb0Eha+Aic0hchvBKzRnq6i0MYSIHn6afs76dLmF8knTjycxrvV5
 Xu1Z3WDmjzqgWF9ja5JCD6fby11seP5RrwObYKVikO35QQyJJwGSGKgu5rq/pByK
 /n0PCnCOINuL0Lz6J9qexdh/0/XYFQilRC31GJNlKbDSFuECF0GOEzEE/xUBW/pI
 dLh2YwIIygm18Gar9PgvMwXJn3BfzQ0qEJsf+HlQeNw9iLgbHpp2AsTxHTE87OGe
 R/y85taW3jGjPsNOKZOeLpvg/Ro8l8ZipLApvDCG2O22DThg/cd6NDjZxl1FJfRH
 acDG/JdgPo5MbdRAH/cM1WuFS9gEM+0BeSQ5gCjtPakF+X4Vz+ABFDLMRJoaejkJ
 q8DG32TQXELQx0RMghsqK7YCWGfl+2alA1u9w6TgJh9Rq4iVckvpDeqAZnK1Adkc
 87g957Tl0n6FA4wJj/t5jrceiLRMJAm/rBK+R3GZNfWrgx4bHbCmb4fZDZsrFzph
 nbAjNJ5kOchrFCaRR47ULby6+Q14MAFbkWq4Crfu4YDdzUkTPpep6pi2GIe8w0rV
 P0hdYOYJf6LUda0utuQX
 =oFrI
 -----END PGP SIGNATURE-----

Merge tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Davbe Airlie:
 "This is the main pull request for graphics for 5.6. Usual selection of
  changes all over.

  I've got one outstanding vmwgfx pull that touches mm so kept it
  separate until after all of this lands. I'll try and get it to you
  soon after this, but it might be early next week (nothing wrong with
  code, just my schedule is messy)

  This also hits a lot of fbdev drivers with some cleanups.

  Other notables:
   - vulkan timeline semaphore support added to syncobjs
   - nouveau turing secureboot/graphics support
   - Displayport MST display stream compression support

  Detailed summary:

  uapi:
   - dma-buf heaps added (and fixed)
   - command line add support for panel oreientation
   - command line allow overriding penguin count

  drm:
   - mipi dsi definition updates
   - lockdep annotations for dma_resv
   - remove dma-buf kmap/kunmap support
   - constify fb_ops in all fbdev drivers
   - MST fix for daisy chained hotplug-
   - CTA-861-G modes with VIC >= 193 added
   - fix drm_panel_of_backlight export
   - LVDS decoder support
   - more device based logging support
   - scanline alighment for dumb buffers
   - MST DSC helpers

  scheduler:
   - documentation fixes
   - job distribution improvements

  panel:
   - Logic PD type 28 panel support
   - Jimax8729d MIPI-DSI
   - igenic JZ4770
   - generic DSI devicetree bindings
   - sony acx424AKP panel
   - Leadtek LTK500HD1829
   - xinpeng XPP055C272
   - AUO B116XAK01
   - GiantPlus GPM940B0
   - BOE NV140FHM-N49
   - Satoz SAT050AT40H12R2
   - Sharp LS020B1DD01D panels.

  ttm:
   - use blocking WW lock

  i915:
   - hw/uapi state separation
   - Lock annotation improvements
   - selftest improvements
   - ICL/TGL DSI VDSC support
   - VBT parsing improvments
   - Display refactoring
   - DSI updates + fixes
   - HDCP 2.2 for CFL
   - CML PCI ID fixes
   - GLK+ fbc fix
   - PSR fixes
   - GEN/GT refactor improvments
   - DP MST fixes
   - switch context id alloc to xarray
   - workaround updates
   - LMEM debugfs support
   - tiled monitor fixes
   - ICL+ clock gating programming removed
   - DP MST disable sequence fixed
   - LMEM discontiguous object maps
   - prefaulting for discontiguous objects
   - use LMEM for dumb buffers if possible
   - add LMEM mmap support

  amdgpu:
   - enable sync object timelines for vulkan
   - MST atomic routines
   - enable MST DSC support
   - add DMCUB display microengine support
   - DC OEM i2c support
   - Renoir DC fixes
   - Initial HDCP 2.x support
   - BACO support for Arcturus
   - Use BACO for runtime PM power save
   - gfxoff on navi10
   - gfx10 golden updates and fixes
   - DCN support on POWER
   - GFXOFF for raven1 refresh
   - MM engine idle handlers cleanup
   - 10bpc EDP panel fixes
   - renoir watermark fixes
   - SR-IOV fixes
   - Arcturus VCN fixes
   - GDDR6 training fixes
   - freesync fixes
   - Pollock support

  amdkfd:
   - unify more codepath with amdgpu
   - use KIQ to setup HIQ rather than MMIO

  radeon:
   - fix vma fault handler race
   - PPC DMA fix
   - register check fixes for r100/r200

  nouveau:
   - mmap_sem vs dma_resv fix
   - rewrite the ACR secure boot code for Turing
   - TU10x graphics engine support (TU11x pending)
   - Page kind mapping for turing
   - 10-bit LUT support
   - GP10B Tegra fixes
   - HD audio regression fix

  hisilicon/hibmc:
   - use generic fbdev code and helpers

  rockchip:
   - dsi/px30 support

  virtio:
   - fb damage support
   - static some functions

  vc4:
   - use dma_resv lock wrappers

  msm:
   - use dma_resv lock wrappers
   - sc7180 display + DSI support
   - a618 support
   - UBWC support improvements

  vmwgfx:
   - updates + new logging uapi

  exynos:
   - enable/disable callback cleanups

  etnaviv:
   - use dma_resv lock wrappers

  atmel-hlcdc:
   - clock fixes

  mediatek:
   - cmdq support
   - non-smooth cursor fixes
   - ctm property support

  sun4i:
   - suspend support
   - A64 mipi dsi support

  rcar-du:
   - Color management module support
   - LVDS encoder dual-link support
   - R8A77980 support

  analogic:
   - add support for an6345

  ast:
   - atomic modeset support
   - primary plane garbage fix

  arcgpu:
   - fixes for fourcc handling

  tegra:
   - minor fixes and improvments

  mcde:
   - vblank support

  meson:
   - OSD1 plane AFBC commit

  gma500:
   - add pageflip support
   - reomve global drm_dev

  komeda:
   - tweak debugfs output
   - d32 support
   - runtime PM suppotr

  udl:
   - use generic shmem helpers
   - cleanup and fixes"

* tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm: (1998 commits)
  drm/nouveau/fb/gp102-: allow module to load even when scrubber binary is missing
  drm/nouveau/acr: return error when registering LSF if ACR not supported
  drm/nouveau/disp/gv100-: not all channel types support reporting error codes
  drm/nouveau/disp/nv50-: prevent oops when no channel method map provided
  drm/nouveau: support synchronous pushbuf submission
  drm/nouveau: signal pending fences when channel has been killed
  drm/nouveau: reject attempts to submit to dead channels
  drm/nouveau: zero vma pointer even if we only unreference it rather than free
  drm/nouveau: Add HD-audio component notifier support
  drm/nouveau: fix build error without CONFIG_IOMMU_API
  drm/nouveau/kms/nv04: remove set but not used variable 'width'
  drm/nouveau/kms/nv50: remove set but not unused variable 'nv_connector'
  drm/nouveau/mmu: fix comptag memory leak
  drm/nouveau/gr/gp10b: Use gp100_grctx and gp100_gr_zbc
  drm/nouveau/pmu/gm20b,gp10b: Fix Falcon bootstrapping
  drm/exynos: Rename Exynos to lowercase
  drm/exynos: change callback names
  drm/mst: Don't do atomic checks over disabled managers
  drm/amdgpu: add the lost mutex_init back
  drm/amd/display: skip opp blank or unblank if test pattern enabled
  ...
2020-01-30 08:04:01 -08:00
Linus Torvalds 4cadc60d6b power supply and reset changes for the v5.6 series
Core:
  * Add battery internal resistance temperature table support
 
 Drivers:
  * sc27xx: Optimize the battery resistance with measuring temperature
  * max17042-battery: Add MAX17055 support
  * bq25890-charger: Add support of BQ25892 and BQ25896 chips
  * misc. fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE72YNB0Y/i3JqeVQT2O7X88g7+poFAl4yC0MACgkQ2O7X88g7
 +prb1Q/+P+tWsL7n4vDfFlvYjefH73SBHaG5rQzIJGJrRqs8/cfwR9eufc/sFwsz
 8msvYstHhwQDFS6JbI67r2gOWM/RPdgz+xXfSXYSr1z9UNO6opaCB1U/hDxTOElF
 7STas/2qBekM5I3wq7AlSbR20pbQti10GTgioyeTp+PoP6ubXPPMPXoqfAxI7zXJ
 7R1FSxRVKqR8XXr6y/+hhD78+koke8dWU43ZPZDjaWGUyIhfF6dK4vemX7C1eJ3b
 OlgeZYkxC/Jmmp7eldMJrbD3NhQEqz+SrEGIXkEIJZtoYp/fwS+JsSXypVU8Ex0h
 s2JoTtaYQFKqfyZixldOaVFBGBQNuw98xSshFDzo9CC+adNK2C6hgkg4mva2O5cR
 VMvlPW5nPbCMrEcE2glZ0XN9bG/jsdUlFTNEKHRBF5Lat6nfSFaZRKwv/Pjl7Bu0
 MpFJz6ml3z2mSjmjl3TQkFugtILu8+gRogW45uLasAsv7s6ZyM/6l/GvIdx/bGdt
 NdLHe4ZFxa00g3ltvaX+3OdGhHtVJqUbuyitrN9sqZfSNYyy+kuEP0nrO+363l4X
 3G1DyD827zCals+SOrdNwF3mQXqFBeE94pwDjN9ECoFuQd6UxApJ5GXnlUrYAMfw
 qOqXIzkcPuAiXIxXGPIIG4QH0axD6T+H1r181UviWY1ldgQCVoc=
 =tr2N
 -----END PGP SIGNATURE-----

Merge tag 'for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:
 "Core:
   - Add battery internal resistance temperature table support

  Drivers:
   - sc27xx: Optimize the battery resistance with measuring temperature
   - max17042-battery: Add MAX17055 support
   - bq25890-charger: Add support of BQ25892 and BQ25896 chips
   - misc fixes"

* tag 'for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (44 commits)
  power: supply: ipaq_micro_battery: remove unneeded semicolon
  power: supply: bq25890_charger: fix incorrect error return when bq25890_field_read fails
  power: supply: axp20x_usb_power: Only poll while offline
  power: supply: axp20x_usb_power: Add wakeup control
  power: supply: axp20x_usb_power: Allow offlining
  power: supply: axp20x_usb_power: Use a match structure
  power: suppy: ucs1002: Make the symbol 'ucs1002_regulator_enable' static
  power: reset: at91-poweroff: use proper master clock register offset
  power: reset: at91-poweroff: introduce struct shdwc_reg_config
  power: supply: bq25890_charger: Add DT and I2C ids for all supported chips
  dt-bindings: Add new chips to bq25890 binding documentation
  power: supply: bq25890_charger: Add support of BQ25892 and BQ25896 chips
  power: supply: core: Update sysfs-class-power ABI document
  power: supply: sbs-battery: Fix a signedness bug in sbs_get_battery_capacity()
  power: supply: ltc2941-battery-gauge: fix use-after-free
  power: supply: max17040: Correct IRQ wake handling
  power: supply: axp20x_usb_power: Remove unused device_node
  power: supply: axp20x_ac_power: Add wakeup control
  power: supply: axp20x_ac_power: Allow offlining
  power: supply: axp20x_ac_power: Fix reporting online status
  ...
2020-01-30 07:51:24 -08:00
Linus Torvalds 893e591b59 Devicetree updates for v5.6:
- Update dtc to upstream v1.5.1-22-gc40aeb60b47a (plus 1 revert)
 
 - Fix for DMA coherent devices on Power
 
 - Rework and simplify the DT phandle cache code
 
 - DT schema conversions for LEDS, gpio-leds, STM32 dfsdm, STM32 UART,
   STM32 ROMEM, STM32 watchdog, STM32 DMAs, STM32 mlahb, STM32 RTC,
   STM32 RCC, STM32 syscon, rs485, Renesas rCar CSI2, Faraday FTIDE010,
   DWC2, Arm idle-states, Allwinner legacy resets, PRCM and clocks,
   Allwinner H6 OPP, Allwinner AHCI, Allwinner MBUS, Allwinner A31 CSI,
   Allwinner h/w codec, Allwinner A10 system ctrl, Allwinner SRAM,
   Allwinner USB PHY, Renesas CEU, generic PCI host, Arm Versatile PCI
 
 - New binding schemas for SATA and PATA controllers, TI and Infineon VR
   controllers, MAX31730
 
 - New compatible strings for i.MX8QM, WCN3991, renesas,r8a77961-wdt,
   renesas,etheravb-r8a77961
 
 - Add USB 'super-speed-plus' as a documented speed
 
 - Vendor prefixes for broadmobi, calaosystems, kam, and mps
 
 - Clean-up the multiple flavors of ST-Ericsson vendor prefixes
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAl4x8eIQHHJvYmhAa2Vy
 bmVsLm9yZwAKCRD6+121jbxhw01FD/9MTmExKdgOc2I0u5MKIa+VXGeJKqfR0Liv
 irQBPVljPUAr7cDZJ4XX4YIuJ0Gh+MTLSF0QFp7kHyeVnfq+6rNMjwtUTpJSKCZb
 7nXQPguTDd2Guc0ycz1AG+nm2ZsFkaxg2GVFtDwA4aLGTho0oKYqFg8KUpZDAU9K
 HkDDyvDSFLZj48yn1yggs3d6kWh9ERTwK2ilDyHEsfJsZuD694X7GtSm0Vwlddti
 iuV/dTIsDfLPYFhDyz0sy21Kei/EWzMkB9sPIX/AhFQSd5/kgDqj1gL4SswbiV2a
 +pdjb0hcDpcpq4AxqGd5L4Jou4Zf9Agy+FNFkgia77MKZSwJo3lGq6GxZfXlu+L3
 XIV+lmjFILh6OtxHJBItDofqSO3jiGhj5THy16x0j6iwa/IHS3iGmp6MV4D75gvt
 +fvjRPrTwNmiaT8ZsjKG9EjnidLAWdwuhOrpqYi4hkQNRhwbA9pSr5ZUFz3G1LRS
 hLUXcBnZaQlfs8pgbzdv2n727WrGsUe1xFRj69nvl1GVIWPu2J14D1c4LU0+uCxH
 3kYcdyulTqwymRfDGBPEn1llp4N5sekJh0MYuYvNY3YtM/AQTE7FoKfR69xOk3Xa
 /Y1GddE0+suHAby7n2RLGGgpSv4notANYaEEsw0yiywgqkSr2kU67zI7hwU03Kux
 KAJZr365aQ==
 =dsEz
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:

 - Update dtc to upstream v1.5.1-22-gc40aeb60b47a (plus 1 revert)

 - Fix for DMA coherent devices on Power

 - Rework and simplify the DT phandle cache code

 - DT schema conversions for LEDS, gpio-leds, STM32 dfsdm, STM32 UART,
   STM32 ROMEM, STM32 watchdog, STM32 DMAs, STM32 mlahb, STM32 RTC,
   STM32 RCC, STM32 syscon, rs485, Renesas rCar CSI2, Faraday FTIDE010,
   DWC2, Arm idle-states, Allwinner legacy resets, PRCM and clocks,
   Allwinner H6 OPP, Allwinner AHCI, Allwinner MBUS, Allwinner A31 CSI,
   Allwinner h/w codec, Allwinner A10 system ctrl, Allwinner SRAM,
   Allwinner USB PHY, Renesas CEU, generic PCI host, Arm Versatile PCI

 - New binding schemas for SATA and PATA controllers, TI and Infineon VR
   controllers, MAX31730

 - New compatible strings for i.MX8QM, WCN3991, renesas,r8a77961-wdt,
   renesas,etheravb-r8a77961

 - Add USB 'super-speed-plus' as a documented speed

 - Vendor prefixes for broadmobi, calaosystems, kam, and mps

 - Clean-up the multiple flavors of ST-Ericsson vendor prefixes

* tag 'devicetree-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (66 commits)
  scripts/dtc: Revert "yamltree: Ensure consistent bracketing of properties with phandles"
  of: Add OF_DMA_DEFAULT_COHERENT & select it on powerpc
  dt-bindings: leds: Convert gpio-leds to DT schema
  dt-bindings: leds: Convert common LED binding to schema
  dt-bindings: PCI: Convert generic host binding to DT schema
  dt-bindings: PCI: Convert Arm Versatile binding to DT schema
  dt-bindings: Be explicit about installing deps
  dt-bindings: stm32: convert dfsdm to json-schema
  dt-bindings: serial: Convert STM32 UART to json-schema
  dt-bindings: serial: Convert rs485 bindings to json-schema
  dt-bindings: timer: Use non-empty ranges in example
  dt-bindings: arm-boards: typo fix
  dt-bindings: Add TI and Infineon VR Controllers as trivial devices
  dt-binding: usb: add "super-speed-plus"
  dt-bindings: rcar-csi2: Convert bindings to json-schema
  dt-bindings: iio: adc: ad7606: Fix wrong maxItems value
  dt-bindings: Convert Faraday FTIDE010 to DT schema
  dt-bindings: Create DT bindings for PATA controllers
  dt-bindings: Create DT bindings for SATA controllers
  dt: bindings: add vendor prefix for Kamstrup A/S
  ...
2020-01-30 07:47:58 -08:00