In preparation for the upcoming split of multicast router state into
their IPv4 and IPv6 variants move the protocol specific timer access to
an ip4 wrapper function.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for the upcoming split of multicast router state into
their IPv4 and IPv6 variants make br_multicast_is_router() protocol
family aware.
Note that for now br_ip6_multicast_is_router() uses the currently still
common ip4_mc_router_timer for now. It will be renamed to
ip6_mc_router_timer later when the split is performed.
While at it also renames the "1" and "2" constants in
br_multicast_is_router() to the MDB_RTR_TYPE_TEMP_QUERY and
MDB_RTR_TYPE_PERM enums.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for the upcoming split of multicast router state into
their IPv4 and IPv6 variants and as the br_multicast_mark_router() will
be split for that remove the select querier wrapper and instead add
ip4 and ip6 variants for br_multicast_query_received().
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for the upcoming split of multicast router state into
their IPv4 and IPv6 variants, rename the affected variable to the IPv4
version first to avoid some renames in later commits.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
The IPv6 Multicast Router Advertisements parsing has the following two
issues:
For one thing, ICMPv6 MRD Advertisements are smaller than ICMPv6 MLD
messages (ICMPv6 MRD Adv.: 8 bytes vs. ICMPv6 MLDv1/2: >= 24 bytes,
assuming MLDv2 Reports with at least one multicast address entry).
When ipv6_mc_check_mld_msg() tries to parse an Multicast Router
Advertisement its MLD length check will fail - and it will wrongly
return -EINVAL, even if we have a valid MRD Advertisement. With the
returned -EINVAL the bridge code will assume a broken packet and will
wrongly discard it, potentially leading to multicast packet loss towards
multicast routers.
The second issue is the MRD header parsing in
br_ip6_multicast_mrd_rcv(): It wrongly checks for an ICMPv6 header
immediately after the IPv6 header (IPv6 next header type). However
according to RFC4286, section 2 all MRD messages contain a Router Alert
option (just like MLD). So instead there is an IPv6 Hop-by-Hop option
for the Router Alert between the IPv6 and ICMPv6 header, again leading
to the bridge wrongly discarding Multicast Router Advertisements.
To fix these two issues, introduce a new return value -ENODATA to
ipv6_mc_check_mld() to indicate a valid ICMPv6 packet with a hop-by-hop
option which is not an MLD but potentially an MRD packet. This also
simplifies further parsing in the bridge code, as ipv6_mc_check_mld()
already fully checks the ICMPv6 header and hop-by-hop option.
These issues were found and fixed with the help of the mrdisc tool
(https://github.com/troglobit/mrdisc).
Fixes: 4b3087c7e3 ("bridge: Snoop Multicast Router Advertisements")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
When CONFIG_NET_SWITCHDEV is disabled, the shim for switchdev_port_attr_set
inside br_mc_disabled_update returns -EOPNOTSUPP. This is not caught,
and propagated to the caller of br_multicast_add_port, preventing ports
from joining the bridge.
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Fixes: ae1ea84b33 ("net: bridge: propagate error code and extack from br_mc_disabled_update")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some Ethernet switches might only be able to support disabling multicast
snooping globally, which is an issue for example when several bridges
span the same physical device and request contradictory settings.
Propagate the return value of br_mc_disabled_update() such that this
limitation is transmitted correctly to user-space.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The benefit is the ability to propagate errors from switchdev drivers
for the SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING and
SWITCHDEV_ATTR_ID_BRIDGE_VLAN_PROTOCOL attributes.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...)).
net/bridge/br_multicast.c:1246:9-16: WARNING: ERR_CAST can be used with mp
Generated by: scripts/coccinelle/api/err_cast.cocci
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Link: https://lore.kernel.org/r/20210204070549.83636-1-vulab@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a default limit of 512 for number of tracked EHT hosts per-port.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
coccicheck suggested using PTR_ERR_OR_ZERO() and looking at the code.
Fix the following coccicheck warnings:
./net/bridge/br_multicast.c:1295:7-13: WARNING: PTR_ERR_OR_ZERO can be
used.
Reported-by: Abaci <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/1611542381-91178-1-git-send-email-abaci-bugfix@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mark groups which were deleted due to fast leave/EHT.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A block report can result in empty source and host sets for both include
and exclude groups so if there are no hosts left we can safely remove
the group. Pull the block group handling so it can cover both cases and
add a check if EHT requires the delete.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for IGMPv3/MLDv2 include and exclude EHT handling. Similar to
how the reports are processed we have 2 cases when the group is in include
or exclude mode, these are processed as follows:
- group include
- is_include: create missing entries
- to_include: flush existing entries and create a new set from the
report, obviously if the src set is empty then we delete the group
- group exclude
- is_exclude: create missing entries
- to_exclude: flush existing entries and create a new set from the
report, any empty source set entries are removed
If the group is in a different mode then we just flush all entries reported
by the host and we create a new set with the new mode entries created from
the report. If the report is include type, the source list is empty and
the group has empty sources' set then we remove it. Any source set entries
which are empty are removed as well. If the group is in exclude mode it
can exist without any S,G entries (allowing for all traffic to pass).
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for IGMPv3/MLDv2 allow/block EHT handling. Similar to how
the reports are processed we have 2 cases when the group is in include
or exclude mode, these are processed as follows:
- group include
- allow: create missing entries
- block: remove existing matching entries and remove the corresponding
S,G entries if there are no more set host entries, then possibly
delete the whole group if there are no more S,G entries
- group exclude
- allow
- host include: create missing entries
- host exclude: remove existing matching entries and remove the
corresponding S,G entries if there are no more set host entries
- block
- host include: remove existing matching entries and remove the
corresponding S,G entries if there are no more set host entries,
then possibly delete the whole group if there are no more S,G entries
- host exclude: create missing entries
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add EHT source set and set-entry create, delete and lookup functions.
These allow to manipulate source sets which contain their own host sets
with entries which joined that S,G. We're limiting the maximum number of
tracked S,G entries per host to PG_SRC_ENT_LIMIT (currently 32) which is
the current maximum of S,G entries for a group. There's a per-set timer
which will be used to destroy the whole set later.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add functions to create, destroy and lookup an EHT host. These are
per-host entries contained in the eht_host_tree in net_bridge_port_group
which are used to store a list of all sources (S,G) entries joined for that
group by each host, the host's current filter mode and total number of
joined entries.
No functional changes yet, these would be used in later patches.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add EHT structures for tracking hosts and sources per group. We keep one
set for each host which has all of the host's S,G entries, and one set for
each multicast source which has all hosts that have joined that S,G. For
each host, source entry we record the filter_mode and we keep an expiry
timer. There is also one global expiry timer per source set, it is
updated with each set entry update, it will be later used to lower the
set's timer instead of lowering each entry's timer separately.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We need to preserve the srcs pointer since we'll be passing it for EHT
handling later.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepare __grp_src_block_incl() for being able to cause a notification
due to changes. Currently it cannot happen, but EHT would change that
since we'll be deleting sources immediately. Make sure that if the pg is
deleted we don't return true as that would cause the caller to access
freed pg. This patch shouldn't cause any functional change.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We need to pass the host address so later it can be used for explicit
host tracking. No functional change.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rename src_size argument to addr_size in preparation for passing host
address as an argument to IGMPv3/MLDv2 functions.
No functional change.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
xdp_return_frame_bulk() needs to pass a xdp_buff
to __xdp_return().
strlcpy got converted to strscpy but here it makes no
functional difference, so just keep the right code.
Conflicts:
net/netfilter/nf_tables_api.c
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When enabling multicast snooping, bridge module deadlocks on multicast_lock
if 1) IPv6 is enabled, and 2) there is an existing querier on the same L2
network.
The deadlock was caused by the following sequence: While holding the lock,
br_multicast_open calls br_multicast_join_snoopers, which eventually causes
IP stack to (attempt to) send out a Listener Report (in igmp6_join_group).
Since the destination Ethernet address is a multicast address, br_dev_xmit
feeds the packet back to the bridge via br_multicast_rcv, which in turn
calls br_multicast_add_group, which then deadlocks on multicast_lock.
The fix is to move the call br_multicast_join_snoopers outside of the
critical section. This works since br_multicast_join_snoopers only deals
with IP and does not modify any multicast data structures of the bridge,
so there's no need to hold the lock.
Steps to reproduce:
1. sysctl net.ipv6.conf.all.force_mld_version=1
2. have another querier
3. ip link set dev bridge type bridge mcast_snooping 0 && \
ip link set dev bridge type bridge mcast_snooping 1 < deadlock >
A typical call trace looks like the following:
[ 936.251495] _raw_spin_lock+0x5c/0x68
[ 936.255221] br_multicast_add_group+0x40/0x170 [bridge]
[ 936.260491] br_multicast_rcv+0x7ac/0xe30 [bridge]
[ 936.265322] br_dev_xmit+0x140/0x368 [bridge]
[ 936.269689] dev_hard_start_xmit+0x94/0x158
[ 936.273876] __dev_queue_xmit+0x5ac/0x7f8
[ 936.277890] dev_queue_xmit+0x10/0x18
[ 936.281563] neigh_resolve_output+0xec/0x198
[ 936.285845] ip6_finish_output2+0x240/0x710
[ 936.290039] __ip6_finish_output+0x130/0x170
[ 936.294318] ip6_output+0x6c/0x1c8
[ 936.297731] NF_HOOK.constprop.0+0xd8/0xe8
[ 936.301834] igmp6_send+0x358/0x558
[ 936.305326] igmp6_join_group.part.0+0x30/0xf0
[ 936.309774] igmp6_group_added+0xfc/0x110
[ 936.313787] __ipv6_dev_mc_inc+0x1a4/0x290
[ 936.317885] ipv6_dev_mc_inc+0x10/0x18
[ 936.321677] br_multicast_open+0xbc/0x110 [bridge]
[ 936.326506] br_multicast_toggle+0xec/0x140 [bridge]
Fixes: 4effd28c12 ("bridge: join all-snoopers multicast address")
Signed-off-by: Joseph Huang <Joseph.Huang@garmin.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20201204235628.50653-1-Joseph.Huang@garmin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend the bridge multicast control and data path to configure routes
for L2 (non-IP) multicast groups.
The uapi struct br_mdb_entry union u is extended with another variant,
mac_addr, which does not change the structure size, and which is valid
when the proto field is zero.
To be compatible with the forwarding code that is already in place,
which acts as an IGMP/MLD snooping bridge with querier capabilities, we
need to declare that for L2 MDB entries (for which there exists no such
thing as IGMP/MLD snooping/querying), that there is always a querier.
Otherwise, these entries would be flooded to all bridge ports and not
just to those that are members of the L2 multicast group.
Needless to say, only permanent L2 multicast groups can be installed on
a bridge port.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20201028233831.610076-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We should remove a group from the sg_port hash only if it's an S,G
entry. This makes it correct and more symmetric with group add. Also
since *,G groups are not added to that hash we can hide a bug.
Fixes: 085b53c8be ("net: bridge: mcast: add sg_port rhashtable")
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since host joins are considered as EXCLUDE {} joins we need to reflect
that in all of *,G ports' S,G entries. Since the S,Gs can have
host_joined == true only set automatically we can safely set it to false
when removing all automatically added entries upon S,G delete.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When excluding S,G entries we need a way to block a particular S,G,port.
The new port group flag is managed based on the source's timer as per
RFCs 3376 and 3810. When a source expires and its port group is in
EXCLUDE mode, it will be blocked.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need to handle group filter mode transitions and initial state.
To change a port group's INCLUDE -> EXCLUDE mode (or when we have added
a new port group in EXCLUDE mode) we need to add that port to all of
*,G ports' S,G entries for proper replication. When the EXCLUDE state is
changed from IGMPv3 report, br_multicast_fwd_filter_exclude() must be
called after the source list processing because the assumption is that
all of the group's S,G entries will be created before transitioning to
EXCLUDE mode, i.e. most importantly its blocked entries will already be
added so it will not get automatically added to them.
The transition EXCLUDE -> INCLUDE happens only when a port group timer
expires, it requires us to remove that port from all of *,G ports' S,G
entries where it was automatically added previously.
Finally when we are adding a new S,G entry we must add all of *,G's
EXCLUDE ports to it.
In order to distinguish automatically added *,G EXCLUDE ports we have a
new port group flag - MDB_PG_FLAGS_STAR_EXCL.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds support for automatic install of S,G mdb entries based
on the port group's source list and the source entry's timer.
Once installed the S,G will be used when forwarding packets if the
approprate multicast/mld versions are set. A new source flag called
BR_SGRP_F_INSTALLED denotes if the source has a forwarding mdb entry
installed.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To speedup S,G forward handling we need to be able to quickly find out
if a port is a member of an S,G group. To do that add a global S,G port
rhashtable with key: source addr, group addr, protocol, vid (all br_ip
fields) and port pointer.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need to be able to differentiate between pg entries created by
user-space and the kernel when we start generating S,G entries for
IGMPv3/MLDv2's fast path. User-space entries are created by default as
RTPROT_STATIC and the kernel entries are RTPROT_KERNEL. Later we can
allow user-space to provide the entry rt_protocol so we can
differentiate between who added the entries specifically (e.g. clag,
admin, frr etc).
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If (S,G) entries are enabled (igmpv3/mldv2) then look them up first. If
there isn't a present (S,G) entry then try to find (*,G).
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since now we have src in br_ip, u no longer makes sense so rename
it to dst. No functional changes.
v2: fix build with CONFIG_BATMAN_ADV_MCAST
CC: Marek Lindner <mareklindner@neomailbox.ch>
CC: Simon Wunderlich <sw@simonwunderlich.de>
CC: Antonio Quartulli <a@unstable.cc>
CC: Sven Eckelmann <sven@narfation.org>
CC: b.a.t.m.a.n@lists.open-mesh.org
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that we have src and dst in br_ip it is logical to use the src field
for the cases where we need to work with a source address such as
querier source address and group source address.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we're handling TO_EXCLUDE report in EXCLUDE filter mode we should
not ignore the return value of __grp_src_toex_excl() as we'll miss
sending notifications about group changes.
Fixes: 5bf1e00b68 ("net: bridge: mcast: support for IGMPV3/MLDv2 CHANGE_TO_INCLUDE/EXCLUDE report")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen reported the following warning:
net/bridge/br_multicast.c: In function 'br_multicast_find_port':
net/bridge/br_multicast.c:1818:21: warning: unused variable 'br' [-Wunused-variable]
1818 | struct net_bridge *br = mp->br;
| ^~
It happens due to bridge's mlock_dereference() when lockdep isn't defined.
Silence the warning by annotating the variable as __maybe_unused.
Fixes: 0436862e41 ("net: bridge: mcast: support for IGMPv3/MLDv2 ALLOW_NEW_SOURCES report")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since each entry type has timers that can be running simultaneously we need
to make sure that entries are not freed before their timers have finished.
In order to do that generalize the src gc work to mcast gc work and use a
callback to free the entries (mdb, port group or src).
v3: add IPv6 support
v2: force mcast gc on port del to make sure all port group timers have
finished before freeing the bridge port
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an IGMPv3/MLDv2 query is received and we're operating in such mode
then we need to avoid updating group timers if the suppress flag is set.
Also we should update only timers for groups in exclude mode.
v3: add IPv6/MLDv2 support
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We already have all necessary helpers, so process IGMPV3/MLDv2
BLOCK_OLD_SOURCES as per the RFCs.
v3: add IPv6/MLDv2 support
v2: directly do flag bit operations
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to process IGMPV3/MLDv2 CHANGE_TO_INCLUDE/EXCLUDE report types we
need new helpers which allow us to mark entries based on their timer
state and to query only marked entries.
v3: add IPv6/MLDv2 support, fix other_query checks
v2: directly do flag bit operations
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to process IGMPV3/MLDv2_MODE_IS_INCLUDE/EXCLUDE report types we
need some new helpers which allow us to set/clear flags for all current
entries and later delete marked entries after the report sources have been
processed.
v3: add IPv6/MLDv2 support
v2: drop flag helpers and directly do flag bit operations
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds handling for the ALLOW_NEW_SOURCES IGMPv3/MLDv2 report
types and limits them only when multicast_igmp_version == 3 or
multicast_mld_version == 2 respectively. Now that IGMPv3/MLDv2 handling
functions will be managing timers we need to delay their activation, thus
a new argument is added which controls if the timer should be updated.
We also disable host IGMPv3/MLDv2 handling as it's not yet implemented and
could cause inconsistent group state, the host can only join a group as
EXCLUDE {} or leave it.
v4: rename update_timer to igmpv2_mldv1 and use the passed value from
br_multicast_add_group's callers
v3: Add IPv6/MLDv2 support
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If an expired port group is in EXCLUDE mode, then we have to turn it
into INCLUDE mode, remove all srcs with zero timer and finally remove
the group itself if there are no more srcs with an active timer.
For IGMPv2 use there would be no sources, so this will reduce to just
removing the group as before.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have to use mdb and port entries when sending mdb notifications in
order to fill in all group attributes properly. Before this change we
would've used a fake br_mdb_entry struct to fill in only partial
information about the mdb. Now we can also reuse the mdb dump fill
function and thus have only a single central place which fills the mdb
attributes.
v3: add IPv6 support
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We need to be able to retransmit group-specific and group-and-source
specific queries. The new timer takes care of those.
v3: add IPv6 support
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allows br_multicast_alloc_query to build queries with the port group's
source lists and sends a query for sources over and under lmqt when
necessary as per RFCs 3376 and 3810 with the suppress flag set
appropriately.
v3: add IPv6 support
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Initial functions for group source lists which are needed for IGMPv3
and MLDv2 include/exclude lists. Both IPv4 and IPv6 sources are supported.
User-added mdb entries are created with exclude filter mode, we can
extend that later to allow user-supplied mode. When group src entries
are deleted, they're freed from a workqueue to make sure their timers
are not still running. Source entries are protected by the multicast_lock
and rcu. The number of src groups per port group is limited to 32.
v4: use the new port group del function directly
add igmpv2/mldv1 bool to denote if the entry was added in those
modes, it will later replace the old update_timer bool
v3: add IPv6 support
v2: allow src groups to be traversed under rcu
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to avoid future errors and reduce code duplication we should
factor out the port group del sequence. This allows us to have one
function which takes care of all details when removing a port group.
v4: set pg's fast leave flag when deleting due to fast leave
move the patch before adding source lists
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit e57f61858b ("net: bridge: mcast: fix stale nsrcs pointer in
igmp3/mld2 report handling") introduced a bug in the IPv6 header payload
length check which would potentially lead to rejecting a valid MLD2 Report:
The check needs to take into account the 2 bytes for the "Number of
Sources" field in the "Multicast Address Record" before reading it.
And not the size of a pointer to this field.
Fixes: e57f61858b ("net: bridge: mcast: fix stale nsrcs pointer in igmp3/mld2 report handling")
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Lüssing
Vladimir Oltean
Florian Fainelli
Xu Wang
Nikolay Aleksandrov
Jiapeng Zhong
Jakub Kicinski
Joseph Huang
Nikolay Aleksandrov