Граф коммитов

245391 Коммитов

Автор SHA1 Сообщение Дата
Jarod Wilson f0c1629dca [media] ite-cir: clean up odd spacing in ite8709 bits
There was some rather odd spacing in a few of the ite8709-specific
functions that made it hard to read those sections of code. This is just
a simple reformatting.

CC: Juan Jesús García de Soria <skandalfo@gmail.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 15:57:49 -03:00
Jarod Wilson ae7b4d4bb5 [media] ite-cir: make IR receive work after resume
Just recently acquired an Asus Eee Box PC with an onboard IR receiver
driven by ite-cir (ITE8713 sub-variant). Works out of the box with the
ite-cir driver in 2.6.39, but stops working after a suspend/resume
cycle. Its fixed by simply reinitializing registers after resume,
similar to what's done in the nuvoton-cir driver. I've not tested with
any other ITE variant, but code inspection suggests this should be safe
on all variants.

Reported-by: Stephan Raue <sraue@openelec.tv>
CC: Juan Jesús García de Soria <skandalfo@gmail.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 15:57:22 -03:00
Jarod Wilson 76a2d21d96 [media] imon: clean up disconnect routine
- Eliminate a possible circular locking lockdep warning
- Make sure we don't try to unregister a vfd on a device w/a vga screen
- Always free imon context after devices are removed (display_close can
  just error out w/no context)

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 15:56:41 -03:00
Jarod Wilson 46872d27da [media] nuvoton-cir: minor tweaks to rc dev init
- Set a default timeout (matching mceusb.c) and use
  ir_raw_event_store_with_filter, which leads to better behavior when
  using lirc userspace decoding with this hardware
- Fill in rx_resolution with the value we're using here (50us)
- Wire up input phys and device parent pointer
- Use device_init_wakeup() instead of device_set_wakeup_*()

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 15:54:16 -03:00
Hans de Goede 7225a1dcc3 [media] uvcvideo: Add M420 format support
The M420 format is used by the Microsoft LifeCam Studio HD.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[laurent.pinchart@ideasonboard.com: split into v4l/uvcvideo patches]
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 12:18:24 -03:00
Hans de Goede 0e59fd0592 [media] v4l: Add M420 format definition
M420 is a hybrid YUV 4:2:0 packet/planar format. Two Y lines are
followed by an interleaved U/V line.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[laurent.pinchart@ideasonboard.com: split into v4l/uvcvideo patches]
[laurent.pinchart@ideasonboard.com: add documentation]
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 12:17:35 -03:00
Bob Liu 7296944759 [media] uvcvideo: Add support for NOMMU arch
Add support to uvc driver for NOMMU arch including add function
uvc_queue_get_unmapped_area() and make some changes in uvc_queue_mmap().
So that uvc camera can be used on nommu arch like blackfin.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 12:16:45 -03:00
Bob Liu ecc6517d94 [media] Revert "V4L/DVB: v4l2-dev: remove get_unmapped_area"
This reverts commit c29fcff3da.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 12:14:40 -03:00
Teresa Gámez 4bc90dea7b [media] V4L: mt9m111: fix pixel clock
This camera driver supports only rising edge, which is the default
setting of the device. The function mt9m111_setup_pixfmt() overwrites
this setting. So the driver actually uses falling edge.
This patch corrects that.

Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
[g.liakhovetski@gmx.de: removed superfluous register write]
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Tested-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 12:07:12 -03:00
Teresa Gámez a1de7a00ae [media] V4L: mt9v022: fix pixel clock
The setup of the pixel clock is done wrong in the mt9v022 driver.
The 'Invert Pixel Clock' bit has to be set to 1 for falling edge
and not for rising. This is not clearly described in the data
sheet.

Tested on pcm037 and pcm027/pcm990.

Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 12:07:04 -03:00
Guennadi Liakhovetski d2dcad49bc [media] V4L: soc-camera: a missing mediabus code -> fourcc translation is not critical
soc_mbus_get_fmtdesc() returning NULL means only, that no standard
mediabus code -> fourcc conversion is known, this shouldn't be treated
as an error by drivers.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 12:06:46 -03:00
Guennadi Liakhovetski e23b961dd1 [media] V4L: soc-camera: add more format look-up entries
Add new look-up entries for all mediabus codes, for which respective
fourcc codes exist.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 12:05:27 -03:00
Guennadi Liakhovetski cc552b620f [media] V4L: soc-camera: add a new packing for YUV 4:2:0 type formats
12-bit formats, similar to YUV 4:2:0 occupy 3 bytes for each two pixels
and cannot be described by any of the existing SOC_MBUS_PACKING_* macros.
This patch adds a new one SOC_MBUS_PACKING_1_5X8 to describe such
formats and extends soc_mbus_samples_per_pixel() to support it.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 12:05:08 -03:00
Guennadi Liakhovetski e9ceeced6f [media] V4L: omap1-camera: fix huge lookup array
Since V4L2_MBUS_FMT_* codes have become large and sparse, they cannot
be used as array indices anymore.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 12:04:32 -03:00
Guennadi Liakhovetski 93f116d595 [media] V4L: soc-camera: avoid huge arrays, caused by changed format codes
Recently mediabus pixel format codes have become a part of the user-
space API, at which time their values also have been changed from
contiguous numbers, running from 0 to sparse numbers with values
around 0x1000, 0x2000, 0x3000... This made them unsuitable for the
use as array indices. This patch switches soc-camera internal format
look-ups to not depend on values of those macros.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 12:04:22 -03:00
Kassey Li ee1b6f4bf3 [media] V4L: soc-camera: add MIPI bus flags
Signed-off-by: Kassey Lee <ygli@marvell.com>
Signed-off-by: Qing Xu <qingx@marvell.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 12:00:41 -03:00
Kassey Li 64149deb6a [media] V4L: soc-camera: add JPEG support
Signed-off-by: Qing Xu <qingx@marvell.com>
Signed-off-by: Kassey Lee <ygli@marvell.com>
[g.liakhovetski@gmx.de: fixed compiler warning]
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 11:57:59 -03:00
Guennadi Liakhovetski 3dac322db6 [media] V4L: sh_mobile_ceu_camera: implement live cropping
PRELIMINARY: break out spinlock changes; consider multiple completing
feames, causing multiple complete() calles.

Add live crop support to the sh_mobile_ceu driver.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 11:56:16 -03:00
Guennadi Liakhovetski aee5c2f1fc [media] V4L: soc-camera: add a livecrop host operation
Add an soc-camera host livecrop operation to implement live zoom. If
a host driver implements it, it should take care to preserve output
frame format, then live crop doesn't break streaming.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 11:55:31 -03:00
Guennadi Liakhovetski 08a31b9605 [media] V4L: mx3_camera: implement .stop_streaming()
The .stop_streaming() videobuf2 operation has to be implemented to
guarantee, that video buffers are not written to after a STREAMOFF.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 11:52:53 -03:00
Guennadi Liakhovetski 066f786720 [media] V4L: sh_mobile_ceu_camera: implement .stop_streaming()
The .stop_streaming() videobuf2 operation has to be implemented to
guarantee, that video buffers are not written to after a STREAMOFF.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 11:52:36 -03:00
Sylwester Nawrocki c68956c14b [media] s5p-csis: Do not use uninitialized variables in s5pcsis_suspend
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 11:32:57 -03:00
Sylwester Nawrocki b5f1220d58 [media] v4l: Add v4l2 subdev driver for S5P/EXYNOS4 MIPI-CSI receivers
Add the subdev driver for the MIPI CSIS units available in S5P and
Exynos4 SoC series. This driver supports both CSIS0 and CSIS1
MIPI-CSI2 receivers.
The driver requires Runtime PM to be enabled for proper operation.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 11:32:43 -03:00
Sylwester Nawrocki 8b4aa4f25c [media] v4l: Move s5p-fimc driver into Video capture devices
s5p-fimc now also implements a camera capture video node so move
it under the "Video capture devices" Kconfig menu. Also update
the entry to reflect the driver's coverage of EXYNOS4 SoCs and
separate the Makefile entry from the soc-camera drivers set.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 11:29:47 -03:00
Sylwester Nawrocki 16846524af [media] v4l: Add V4L2_MBUS_FMT_JPEG_1X8 media bus format
Add V4L2_MBUS_FMT_JPEG_1X8 format and the corresponding Docbook
documentation.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 11:28:49 -03:00
Antonio Ospite f1703aa6ab [media] gspca - kinect: fix comments referring to color camera
Use the expression "video stream" instead of "color camera" which is
more correct as the driver supports the RGB and IR image on the same
endpoint.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 09:30:59 -03:00
Drew Fisher 3fabe8f49e [media] gspca - kinect: fix a typo s/steram/stream/
Signed-off-by: Drew Fisher <drew.m.fisher@gmail.com>
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 09:30:58 -03:00
Drew Fisher bb066467aa [media] gspca - kinect: move communications buffers out of stack
Move large communications buffers out of stack and into device
structure. This prevents the frame size from being >1kB and fixes a
compiler warning when CONFIG_FRAME_WARN=1024:

drivers/media/video/gspca/kinect.c: In function ‘send_cmd.clone.0’:
drivers/media/video/gspca/kinect.c:202: warning: the frame size of 1548 bytes is larger than 1024 bytes

Reported-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Drew Fisher <drew.m.fisher@gmail.com>
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 09:30:57 -03:00
Andreas Oberritter aff8ab5cc1 [media] DVB: return meaningful error codes in dvb_frontend
- Return values should not be ORed. Abort early instead.
- Return -EINVAL instead of -1.

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 09:30:56 -03:00
Oliver Endriss 35d451b999 [media] Kconfig: Fix indention of ---help--- for timerdale driver
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 09:30:54 -03:00
Mauro Carvalho Chehab 0ed08b496c DocBook/dvb: Improve description of the DVB API v5
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 09:30:53 -03:00
Olivier Grenie 5a0deeed57 [media] DiBxxxx: get rid of DMA buffer on stack
This patch removes the remaining on-stack buffer for USB DMA transfer.
This patch also reduces the stack memory usage.

Cc: stable@kernel.org
Cc: Florian Mickler <florian@mickler.org>
Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 09:30:52 -03:00
Daniel Drake 027e99abbf [media] via-camera: add MODULE_ALIAS
This fixes autoloading of the module.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 09:30:49 -03:00
Simon Farnsworth bea3c54f52 [media] cx18: Fix warnings introduced during cleanup
I misused the ktime API, and failed to remove some traces of the
in-kernel format conversion. Fix these, so the the driver builds
without warnings.

Signed-off-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 09:30:48 -03:00
Laurent Pinchart 5f7088127e [media] uvcvideo: Make the API public
Move the public API definitions to include/linux/uvcvideo.h and bump the
version number to 1.1.0. Compatibility with the old API is kept,
application can still be compiled against the private header and will
not break.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 09:30:46 -03:00
Laurent Pinchart f411f10382 [media] uvcvideo: Return -ERANGE when userspace sets an unsupported menu entry
Instead of passing the value down to the device and getting an error
back (or worse, crashing the firmware), return -ERANGE when the
requested menu entry is not supported.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 09:30:45 -03:00
Laurent Pinchart fc2d573fb4 [media] uvcvideo: Don't report unsupported menu entries
Supported menu entries are reported by the device in response to the
GET_RES query. Use the information to return -EINVAL to userspace for
unsupported values when enumerating menu entries.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 09:30:43 -03:00
Laurent Pinchart e01a234407 [media] uvcvideo: Override wrong bandwidth value for Hercules Classic Silver
Set the FIX_BANDWIDTH quirk for the device.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 09:30:41 -03:00
Laurent Pinchart d1787b1f8d [media] uvcvideo: Add support for JMicron USB2.0 XGA WebCam
The camera requires the PROBE_MINMAX quirk. Add a corresponding entry
in the device IDs list

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 09:30:40 -03:00
Laurent Pinchart 5079107991 [media] uvcvideo: Add support for V4L2_PIX_FMT_RGB565
The TomTom navigation system used in the Sony XNV 660BT and 770BT
reports an RGB565 (RGBP) format, support it in the driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 09:30:38 -03:00
Martin Rubli fb08a5cd57 [media] uvcvideo: Add driver documentation
This adds detailed documentation about the driver's extension unit control
features. Part of it has been adopted from the dynctrl.txt that used to be
available in the driver's previous Subversion repository.

The documentation has been rewritten to match the current implementation, in
particular to capture the new XU control support including UVCIOC_CTRL_QUERY.

Signed-off-by: Martin Rubli <martin_rubli@logitech.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 09:30:36 -03:00
Laurent Pinchart 9eb30d2fa9 [media] uvcvideo: Rename UVC_CONTROL_* flags to UVC_CTRL_FLAG_*
This makes the public driver API more uniform, in preparation of moving
uvcvideo.h to include/linux. Keep the old names for backward
compatibility with existing applications.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 09:30:34 -03:00
Laurent Pinchart 1dc8ddfd5a [media] uvcvideo: Deprecate UVCIOC_CTRL_{ADD,MAP_OLD,GET,SET}
Those ioctls are deprecated, list them in the features removal schedule
for 2.6.42.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 09:30:31 -03:00
Martin Rubli fe78d187fe [media] uvcvideo: Add UVCIOC_CTRL_QUERY ioctl
This ioctl extends UVCIOC_CTRL_GET/SET by not only allowing to get/set
XU controls but to also send arbitrary UVC commands to XU controls,
namely GET_CUR, SET_CUR, GET_MIN, GET_MAX, GET_RES, GET_LEN, GET_INFO
and GET_DEF. This is required for applications to work with XU controls,
so that they can properly query the size and allocate the necessary
buffers.

Signed-off-by: Martin Rubli <martin_rubli@logitech.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 09:30:26 -03:00
Simon Farnsworth 837d50b564 [media] cx18: Bump driver version to 1.5.0
To simplify maintainer support of this driver, bump the version to
1.5.0 - this will be the first version that is expected to support
mmap() for raw video frames.

Signed-off-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Acked-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 09:30:24 -03:00
Simon Farnsworth 1bf5842fe3 [media] cx18: Clean up mmap() support for raw YUV
The initial version of this patch (commit
d5976931639176bb6777755d96b9f8d959f79e9e) had some issues:

 * It didn't correctly calculate the size of the YUV buffer for 4:2:2,
   resulting in capture sometimes being offset by 1/3rd of a picture.

 * There were a lot of variables duplicating information the driver
   already knew, which have been removed.

 * There was an in-kernel format conversion - libv4l can do this one,
   and is the right place to do format conversions anyway.

 * Some magic numbers weren't properly explained.

Fix all these issues, leaving just the move from videobuf to videobuf2
to do.

Signed-off-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Acked-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 09:30:22 -03:00
Mariusz Kozlowski 81dfea886c [media] cpia2: fix typo in variable initialisation
Currently 'fh' initialises to whatever happens to be on stack. This
looks like a typo and this patch fixes that.

Signed-off-by: Mariusz Kozlowski <mk@lab.zgora.pl>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 09:30:21 -03:00
Antti Palosaari e47b78f036 [media] cxd2820r: switch automatically between DVB-T and DVB-T2
Remove old DVB-T2 freq module param and detect DVB-T/T2 automatically.

Implementation is trial and error, if DVB-T does not lock try DVB-T2
and vice versa. That's done by replacing normal DVBFE_ALGO_SW with
DVBFE_ALGO_CUSTOM which gives better control for tuning process.

DVB-C still uses normal software ZigZag, DVBFE_ALGO_SW.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 09:30:19 -03:00
Antti Palosaari 2e1ea06e9c [media] cxd2820r: whitespace fix
Make checkpatch.pl happy by fixing whitespaces introduced by
commit 79e8b8e3b8cbf67130247a3f6d25732373fe2f34

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 09:30:17 -03:00
Steve Kerrison 2892bd0d95 [media] em28xx: Disable audio for EM28174
Signed-off-by: Steve Kerrison <steve@stevekerrison.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 09:30:15 -03:00