Граф коммитов

12188 Коммитов

Автор SHA1 Сообщение Дата
Johannes Berg 3832c287f1 mac80211: fix RX path
My previous patch ("mac80211: remove mixed-cell and userspace MLME code")
was too obvious to me, so obvious that a stupid bug crept in. The IBSS
RX function must be invoked for IBSS, of course, not anything != IBSS.

Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:13:19 -04:00
Johannes Berg 2b874e83c9 mac80211: rate control status only for controlled packets
This patch changes mac80211 to not notify the rate control algorithm's
tx_status() method when reporting status for a packet that didn't go
through the rate control algorithm's get_rate() method.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:13:15 -04:00
Kalle Valo 04de838159 mac80211: add beacon filtering support
Add IEEE80211_HW_BEACON_FILTERING flag so that driver inform that it supports
beacon filtering. Drivers need to call the new function
ieee80211_beacon_loss() to notify about beacon loss.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:13:13 -04:00
Kalle Valo a08c1c1ac0 cfg80211: add feature to hold bss
In beacon filtering there needs to be a way to not expire the BSS even
when no beacons are received. Add an interface to cfg80211 to hold
BSS and make sure that it's not expired.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:13:13 -04:00
Kalle Valo 9050bdd858 mac80211: disable power save when scanning
When software scanning we need to disable power save so that all possible
probe responses and beacons are received. For hardware scanning assume that
hardware will take care of that and document that assumption.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:13:12 -04:00
Kalle Valo 15b7b0629c mac80211: track beacons separately from the rx path activity
Separate beacon and rx path tracking in preparation for the beacon filtering
support. At the same time change ieee80211_associated() to look a bit simpler.

Probe requests are now sent only after IEEE80211_PROBE_IDLE_TIME, which
is now set to 60 seconds.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:13:12 -04:00
Kalle Valo 3cf335d527 mac80211: decrease execution of the associated timer
Currently the timer is triggering every two seconds
(IEEE80211_MONITORING_INTERVAL). Decrease the timer to only trigger during
data idle periods to avoid waking up CPU unnecessary. The timer will
still trigger during idle periods, that needs to be fixed later.

There's also a functional change that probe requests are sent only when the
data path is idle, earlier they were sent also while there was activity
on the data path.

This is also preparation for the beacon filtering support. Thanks to
Johannes Berg for the idea.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:13:12 -04:00
Johannes Berg 7986cf9581 mac80211: remove mixed-cell and userspace MLME code
Neither can currently be set from userspace, so there's no
regression potential, and neither will be supported from
userspace since the new userspace APIs allow the SME, which
is in userspace, to control all we need.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:13:08 -04:00
Johannes Berg ac7f9cfa2c cfg80211: accept no-op interface mode changes
When somebody tries to set the interface mode to the existing
mode, don't ask the driver but silently accept the setting.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:13:08 -04:00
Luis R. Rodriguez 86f04680df cfg80211: remove code about country IE support with OLD_REG
We had left in code to allow interested developers to add
support for parsing country IEs when OLD_REG was enabled.
This never happened and since we're going to remove OLD_REG
lets just remove these comments and code for it.

This code path was never being entered so this has no
functional change.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:13:07 -04:00
Luis R. Rodriguez 6ee7d33056 cfg80211: make regdom module parameter available oustide of OLD_REG
It seems a few users are using this module parameter although its not
recommended. People are finding it useful despite there being utilities
for setting this in userspace. I'm not aware of any distribution using
this though.

Until userspace and distributions catch up with a default userspace
automatic replacement (GeoClue integration would be nirvana) we copy
the ieee80211_regdom module parameter from OLD_REG to the new reg
code to help these users migrate.

Users who are using the non-valid ISO / IEC 3166 alpha "EU" in their
ieee80211_regdom module parameter and migrate to non-OLD_REG enabled
system will world roam.

This also schedules removal of this same ieee80211_regdom module
parameter circa March 2010. Hope is by then nirvana is reached and
users will abandoned the module parameter completely.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:13:07 -04:00
Luis R. Rodriguez cc0b6fe88e cfg80211: fix incorrect assumption on last_request for 11d
The incorrect assumption is the last regulatory request
(last_request) is always a country IE when processing
country IEs. Although this is true 99% of the time the
first time this happens this could not be true.

This fixes an oops in the branch check for the last_request
when accessing drv_last_ie. The access was done under the
assumption the struct won't be null.

Note to stable: to port to 29 replace as follows, only 29 has
country IE code:

s|NL80211_REGDOM_SET_BY_COUNTRY_IE|REGDOM_SET_BY_COUNTRY_IE

Cc: stable@kernel.org
Reported-by: Quentin Armitage <Quentin@armitage.org.uk>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:13:07 -04:00
Luis R. Rodriguez 2e097dc656 cfg80211: force last_request to be set for OLD_REG if regdom is EU
Although EU is a bogus alpha2 we need to process the send request
as our code depends on last_request being set.

Cc: stable@kernel.org
Reported-by: Quentin Armitage <Quentin@armitage.org.uk>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:13:06 -04:00
Jouni Malinen eec60b037a nl80211: Check iftype in cfg80211 code
We do not want to require all the drivers using cfg80211 to need to do
this. In addition, make the error values consistent by using
EOPNOTSUPP instead of semi-random assortment of errno values.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:13:05 -04:00
Jouni Malinen 35a8efe1a6 nl80211: Check that netif_runnin is true in cfg80211 code
We do not want to require all the drivers using cfg80211 to need to do
this or to be prepared to handle these commands when the interface is
down.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:13:05 -04:00
Jouni Malinen 255e737eab nl80211: Add more through validation of MLME command parameters
Check that the used authentication type and reason code are valid here
so that drivers/mac80211 do not need to care about this. In addition,
remove the unnecessary validation of SSID attribute length which is
taken care of by netlink policy.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:13:04 -04:00
Jouni Malinen 65fc73ac4a nl80211: Remove NL80211_CMD_SET_MGMT_EXTRA_IE
The functionality that NL80211_CMD_SET_MGMT_EXTRA_IE provided can now
be achieved with cleaner design by adding IE(s) into
NL80211_CMD_TRIGGER_SCAN, NL80211_CMD_AUTHENTICATE,
NL80211_CMD_ASSOCIATE, NL80211_CMD_DEAUTHENTICATE, and
NL80211_CMD_DISASSOCIATE.

Since this is a very recently added command and there are no known (or
known planned) applications using NL80211_CMD_SET_MGMT_EXTRA_IE and
taken into account how much extra complexity it adds to the IE
processing we have now (and need to add in the future to fix IE order
in couple of frames), it looks like the best option is to just remove
the implementation of this command for now. The enum values themselves
are left to avoid changing the nl80211 command or attribute numbers.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:13:04 -04:00
Jouni Malinen d7873cb9ab mac80211: Fix memleak in nl80211 authentication on deinit
This file was forgotten from the quilt patch that added MLME
primitives, so the kfree on interface removal is missing. Fix this
potential memleak by freeing the temporary Authentication frame IEs
from SME when the interface is being removed.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:13:04 -04:00
Johannes Berg 827b1fb44b mac80211: resume properly, add suspend/resume test
When mac80211 resumes, it currently doesn't reconfigure the interfaces
entirely and also doesn't reconfigure BSS information -- fix this.

Also, to be able to test this, add a debugfs file that just calls
the suspend/resume code to see what happens when we go through that,
without needing the time-consuming suspend/resume cycle.

(Original version broke the build for CONFIG_PM=n.  Define alternative
functions for that situation. -- JWL)

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:13:03 -04:00
Jouni Malinen 636a5d3625 nl80211: Add MLME primitives to support external SME
This patch adds new nl80211 commands to allow user space to request
authentication and association (and also deauthentication and
disassociation). The commands are structured to allow separate
authentication and association steps, i.e., the interface between
kernel and user space is similar to the MLME SAP interface in IEEE
802.11 standard and an user space application takes the role of the
SME.

The patch introduces MLME-AUTHENTICATE.request,
MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and
MLME-DISASSOCIATE.request primitives. The authentication and
association commands request the actual operations in two steps
(assuming the driver supports this; if not, separate authentication
step is skipped; this could end up being a separate "connect"
command).

The initial implementation for mac80211 uses the current
net/mac80211/mlme.c for actual sending and processing of management
frames and the new nl80211 commands will just stop the current state
machine from moving automatically from authentication to association.
Future cleanup may move more of the MLME operations into cfg80211.

The goal of this design is to provide more control of authentication and
association process to user space without having to move the full MLME
implementation. This should be enough to allow IEEE 802.11r FT protocol
and 802.11s SAE authentication to be implemented. Obviously, this will
also bring the extra benefit of not having to use WEXT for association
requests with mac80211. An example implementation of a user space SME
using the new nl80211 commands is available for wpa_supplicant.

This patch is enough to get IEEE 802.11r FT protocol working with
over-the-air mechanism (over-the-DS will need additional MLME
primitives for handling the FT Action frames).

Signed-off-by: Jouni Malinen <j@w1.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:13:02 -04:00
Jouni Malinen 6039f6d23f nl80211: Event notifications for MLME events
Add new nl80211 event notifications (and a new multicast group, "mlme")
for informing user space about received and processed Authentication,
(Re)Association Response, Deauthentication, and Disassociation frames in
station and IBSS modes (i.e., MLME SAP interface primitives
MLME-AUTHENTICATE.confirm, MLME-ASSOCIATE.confirm,
MLME-REASSOCIATE.confirm, MLME-DEAUTHENTICATE.indicate, and
MLME-DISASSOCIATE.indication). The event data is encapsulated as the 802.11
management frame since we already have the frame in that format and it
includes all the needed information.

This is the initial step in providing MLME SAP interface for
authentication and association with nl80211. In other words, kernel code
will act as the MLME and a user space application can control it as the
SME.

Signed-off-by: Jouni Malinen <j@w1.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:13:02 -04:00
Jouni Malinen a299542e97 mac80211: Fix reassociation by not clearing previous BSSID
We must not clear the previous BSSID when roaming to another AP within
the same ESS for reassociation to be used properly. It is fine to
clear this when the SSID changes, so let's move the code into
ieee80211_sta_set_ssid().

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:13:01 -04:00
Jouni Malinen 4b4698c443 mac80211: Fix a typo in assoc vs. reassoc check
Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:13:01 -04:00
Kalle Valo a9a6ffffd0 mac80211: don't drop nullfunc frames during software scan
ieee80211_tx_h_check_assoc() was dropping everything else than probe
requests during software scan. So the nullfunc frame with the power save
bit was dropped and AP never received it. This meant that AP never
buffered any frames for the station during software scan.

Fix this by allowing to transmit both probe request and nullfunc frames
during software scan. Tested with stlc45xx.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:13:00 -04:00
Johannes Berg 3b85875a25 nl80211: rework locking
When I added scanning to cfg80211, we got a lock dependency like this:
	rtnl --> cfg80211_mtx

nl80211, on the other hand, has the reverse lock dependency:
	cfg80211_mtx --> rtnl

which clearly is a bad idea. This patch reworks nl80211 to take these
two locks in the other order to fix the possible, and easily
triggerable, deadlock.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:12:56 -04:00
Sujith 722f069a6d mac80211: Tear down aggregation sessions for suspend/resume
When the driver has been notified with a STA_REMOVE, it tears down
the internal ADDBA state. On resume, trying to initiate aggregation would
fail because mac80211 has not cleared the operational state for that <TID,STA>.
This can be fixed by tearing down the existing sessions on a suspend.

Also, the driver can initiate a new BA session when suspend is in progress.
This is fixed by marking the station as being in suspend state and
denying ADDBA requests for such STAs.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:12:55 -04:00
Johannes Berg 7f0216a49b mac80211: acquire sta_lock for station suspend/resume
To avoid concurrent manipulations of the sta list (which shouldn't
be possible at this point, but anyway) we need to hold the sta_lock
around iterating the list.

At the same time, we do not need to iterate the list at all if
the driver doesn't want to be notified.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:12:53 -04:00
Johannes Berg 8fdc621dc7 nl80211: export supported commands
This makes nl80211 export the supported commands (command groups)
per wiphy so userspace has an idea what it can do -- this will be
required reading for userspace when we introduce auth/assoc /or/
connect for older hardware that cannot separate auth and assoc.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:12:53 -04:00
Vasanthakumar Thiagarajan ec30415f79 mac80211: Populate HT limitation with TKIP/WEP to the handler for SIOCSIWENCODE too
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:12:52 -04:00
Johannes Berg aae89831df wireless: radiotap updates
Radiotap was updated to include a "bad PLCP" flag and standardise
the "bad FCS" flag in the "flags" rather than "RX flags" field,
this patch updates Linux to that standard.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:12:52 -04:00
Johannes Berg 25420604c8 mac80211: stop queues across suspend/resume
Even though userland probably cannot submit packets, there might
still be some coming, and that's no good when the driver doesn't
expect them. Stop the queues across suspend/resume.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:12:52 -04:00
Johannes Berg b5bde374f0 mac80211: fix warnings in ieee80211_if_config
The last warning can never trigger, and the explicit AP_VLAN
check is pointless if we move the config_interface check down,
in practice config_interface is required anyway.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:12:52 -04:00
Helmut Schaa 11432379fd mac80211: start pending scan after probe/auth/assoc timed out
If a scan is queued in STA mode while the interface is in state direct
probe, authenticate or associate the scan is delayed until the interface
enters disabled or associated state. But in case of direct probe-,
authentication- or association- timeout sta_work will not be scheduled
anymore (without external trigger) and thus the pending scan is not
executed and prevents a new scan from being triggered (-EBUSY).

Fix this by queueing the sta work again after direct probe-, authentication-
and association- timeout.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:12:45 -04:00
Johannes Berg 176be728ee mac80211: remove ieee80211_num_regular_queues
This inline is useless and actually makes the code _longer_
rather than shorter.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:12:42 -04:00
Reinette Chatre 633e24ed95 cfg80211/nl80211: remove usage of CONFIG_NL80211
The scan capability added to cfg80211/nl80211 introduced a
dependency on nl80211 by cfg80211. We can thus no longer have
just cfg80211 without nl80211. Specifically, cfg80211_scan_done()
calls nl80211_send_scan_aborted() or nl80211_send_scan_done().

Now we remove the option for user to select nl80211. It will always
be compiled if user selects cfg80211.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:12:42 -04:00
Alina Friedrichsen fa56dddd67 mac80211: ieee80211_ibss_commit() cleanup
Don't call ieee80211_sta_find_ibss() directly, like it's done in STA
mode, so that the commit() call is more harmless respectively has
less site-effects.

Signed-off-by: Alina Friedrichsen <x-alina@gmx.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:12:41 -04:00
Linus Torvalds 3ae5080f4c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (37 commits)
  fs: avoid I_NEW inodes
  Merge code for single and multiple-instance mounts
  Remove get_init_pts_sb()
  Move common mknod_ptmx() calls into caller
  Parse mount options just once and copy them to super block
  Unroll essentials of do_remount_sb() into devpts
  vfs: simple_set_mnt() should return void
  fs: move bdev code out of buffer.c
  constify dentry_operations: rest
  constify dentry_operations: configfs
  constify dentry_operations: sysfs
  constify dentry_operations: JFS
  constify dentry_operations: OCFS2
  constify dentry_operations: GFS2
  constify dentry_operations: FAT
  constify dentry_operations: FUSE
  constify dentry_operations: procfs
  constify dentry_operations: ecryptfs
  constify dentry_operations: CIFS
  constify dentry_operations: AFS
  ...
2009-03-27 16:23:12 -07:00
ideawu abd91ee979 sunrpc/svc.c: Remove unused line 'rqstp->rq_server = serv;' in svc_process
There is no need to set rqstp->rq_server to serv, while serv is initialized as rqstp->rq_server at previous line. And between these two lines, there is no change to rqstp->rq_server.

Signed-off-by: ideawu <ideawu@163.com>
Reviewed-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-03-27 19:15:21 -04:00
Al Viro 3ba13d179e constify dentry_operations: rest
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-03-27 14:44:03 -04:00
Ingo Molnar 6e15cf0486 Merge branch 'core/percpu' into percpu-cpumask-x86-for-linus-2
Conflicts:
	arch/parisc/kernel/irq.c
	arch/x86/include/asm/fixmap_64.h
	arch/x86/include/asm/setup.h
	kernel/irq/handle.c

Semantic merge:
        arch/x86/include/asm/fixmap.h

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-27 17:28:43 +01:00
Alan Cox 83e0bbcbe2 af_rose/x25: Sanity check the maximum user frame size
Otherwise we can wrap the sizes and end up sending garbage.

Closes #10423

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-27 00:28:21 -07:00
Alan Cox 03ba999117 appletalk: this warning can go I think
Its past 2.2 ...

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-27 00:27:18 -07:00
Chuck Ebbert 7d0b591c65 xfrm: spin_lock() should be spin_unlock() in xfrm_state.c
spin_lock() should be spin_unlock() in xfrm_state_walk_done().

caused by:
commit 12a169e7d8
"ipsec: Put dumpers on the dump list"

Reported-by: Marc Milgram <mmilgram@redhat.com>
Signed-off-by: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-27 00:23:04 -07:00
Jesper Nilsson 71f6f6dfdf ipv6: Plug sk_buff leak in ipv6_rcv (net/ipv6/ip6_input.c)
Commit 778d80be52
(ipv6: Add disable_ipv6 sysctl to disable IPv6 operaion on specific interface)
seems to have introduced a leak of sk_buff's for ipv6 traffic,
at least in some configurations where idev is NULL, or when ipv6
is disabled via sysctl.

The problem is that if the first condition of the if-statement
returns non-NULL, it returns an skb with only one reference,
and when the other conditions apply, execution jumps to the "out"
label, which does not call kfree_skb for it.

To plug this leak, change to use the "drop" label instead.
(this relies on it being ok to call kfree_skb on NULL)
This also allows us to avoid calling rcu_read_unlock here,
and removes the only user of the "out" label.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-27 00:17:45 -07:00
David S. Miller 01e6de64d9 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-next-2.6 2009-03-26 22:45:23 -07:00
Herbert Xu 8f1ead2d1a GRO: Disable GRO on legacy netif_rx path
When I fixed the GRO crash in the legacy receive path I used
napi_complete to replace __napi_complete.  Unfortunately they're
not the same when NETPOLL is enabled, which may result in us
not calling __napi_complete at all.

What's more, we really do need to keep the __napi_complete call
within the IRQ-off section since in theory an IRQ can occur in
between and fill up the backlog to the maximum, causing us to
lock up.

Since we can't seem to find a fix that works properly right now,
this patch reverts all the GRO support from the netif_rx path.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-26 22:24:28 -07:00
Linus Torvalds 8e9d208972 Merge branch 'bkl-removal' of git://git.lwn.net/linux-2.6
* 'bkl-removal' of git://git.lwn.net/linux-2.6:
  Rationalize fasync return values
  Move FASYNC bit handling to f_op->fasync()
  Use f_lock to protect f_flags
  Rename struct file->f_ep_lock
2009-03-26 16:14:02 -07:00
David S. Miller 08abe18af1 Merge branch 'master' of /home/davem/src/GIT/linux-2.6/
Conflicts:
	drivers/net/wimax/i2400m/usb-notif.c
2009-03-26 15:23:24 -07:00
Linus Torvalds 0c93ea4064 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (61 commits)
  Dynamic debug: fix pr_fmt() build error
  Dynamic debug: allow simple quoting of words
  dynamic debug: update docs
  dynamic debug: combine dprintk and dynamic printk
  sysfs: fix some bin_vm_ops errors
  kobject: don't block for each kobject_uevent
  sysfs: only allow one scheduled removal callback per kobj
  Driver core: Fix device_move() vs. dpm list ordering, v2
  Driver core: some cleanup on drivers/base/sys.c
  Driver core: implement uevent suppress in kobject
  vcs: hook sysfs devices into object lifetime instead of "binding"
  driver core: fix passing platform_data
  driver core: move platform_data into platform_device
  sysfs: don't block indefinitely for unmapped files.
  driver core: move knode_bus into private structure
  driver core: move knode_driver into private structure
  driver core: move klist_children into private structure
  driver core: create a private portion of struct device
  driver core: remove polling for driver_probe_done(v5)
  sysfs: reference sysfs_dirent from sysfs inodes
  ...

Fixed conflicts in drivers/sh/maple/maple.c manually
2009-03-26 11:17:04 -07:00
Linus Torvalds 562f477a54 Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (29 commits)
  crypto: sha512-s390 - Add missing block size
  hwrng: timeriomem - Breaks an allyesconfig build on s390:
  nlattr: Fix build error with NET off
  crypto: testmgr - add zlib test
  crypto: zlib - New zlib crypto module, using pcomp
  crypto: testmgr - Add support for the pcomp interface
  crypto: compress - Add pcomp interface
  netlink: Move netlink attribute parsing support to lib
  crypto: Fix dead links
  hwrng: timeriomem - New driver
  crypto: chainiv - Use kcrypto_wq instead of keventd_wq
  crypto: cryptd - Per-CPU thread implementation based on kcrypto_wq
  crypto: api - Use dedicated workqueue for crypto subsystem
  crypto: testmgr - Test skciphers with no IVs
  crypto: aead - Avoid infinite loop when nivaead fails selftest
  crypto: skcipher - Avoid infinite loop when cipher fails selftest
  crypto: api - Fix crypto_alloc_tfm/create_create_tfm return convention
  crypto: api - crypto_alg_mod_lookup either tested or untested
  crypto: amcc - Add crypt4xx driver
  crypto: ansi_cprng - Add maintainer
  ...
2009-03-26 11:04:34 -07:00
Holger Eitzenberger d271e8bd8c ctnetlink: compute generic part of event more acurately
On a box with most of the optional Netfilter switches turned off some
of the NLAs are never send, e. g. secmark, mark or the conntrack
byte/packet counters.  As a worst case scenario this may possibly
still lead to ctnetlink skbs being reallocated in netlink_trim()
later, loosing all the nice effects from the previous patches.

I try to solve that (at least partly) by correctly #ifdef'ing the
NLAs in the computation.

Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-26 13:37:14 +01:00
David S. Miller f0de70f8bb Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2009-03-26 01:22:01 -07:00
Rami Rosen ede5ad0e29 net: core: remove unneeded include in net/core/utils.c.
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-26 01:11:48 -07:00
Eric Leblond 7249dee5bd netfilter: fix nf_logger name in ebt_ulog.
This patch renames the ebt_ulog nf_logger from "ulog" to "ebt_ulog" to
be in sync with other modules naming. As this name was currently only
used for informational purpose, the renaming should be harmless.

Signed-off-by: Eric Leblond <eric@inl.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-26 01:04:28 -07:00
Eric Leblond 3b334d427c netfilter: fix warning in ebt_ulog init function.
The ebt_ulog module does not follow the fixed convention about function
return. Loading the module is triggering the following message:

sys_init_module: 'ebt_ulog'->init suspiciously returned 1, it should follow 0/-E convention
sys_init_module: loading module anyway...
Pid: 2334, comm: modprobe Not tainted 2.6.29-rc5edenwall0-00883-g199e57b #146
Call Trace:
 [<c0441b81>] ? printk+0xf/0x16
 [<c02311af>] sys_init_module+0x107/0x186
 [<c0202cfa>] syscall_call+0x7/0xb

The following patch fixes the return treatment in ebt_ulog_init()
function.

Signed-off-by: Eric Leblond <eric@inl.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-26 01:04:02 -07:00
Eric Leblond 704b3ea3b9 netfilter: fix warning about invalid const usage
This patch fixes the declaration of the logger structure in ebt_log
and ebt_ulog: I forgot to remove the const option from their declaration
in the commit ca735b3aaa ("netfilter:
use a linked list of loggers").

Pointed-out-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Eric Leblond <eric@inl.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-26 01:03:23 -07:00
Stephen Hemminger cda6d377ec bridge: bad error handling when adding invalid ether address
This fixes an crash when empty bond device is added to a bridge.
If an interface with invalid ethernet address (all zero) is added
to a bridge, then bridge code detects it when setting up the forward
databas entry. But the error unwind is broken, the bridge port object 
can get freed twice: once when ref count went to zeo, and once by kfree.
Since object is never really accessible, just free it.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-25 21:01:47 -07:00
Holger Eitzenberger a400c30edb netfilter: nf_conntrack: calculate per-protocol nlattr size
Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-25 21:53:39 +01:00
Holger Eitzenberger 5c0de29d06 netfilter: nf_conntrack: add generic function to get len of generic policy
Usefull for all protocols which do not add additional data, such
as GRE or UDPlite.

Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-25 21:52:17 +01:00
Holger Eitzenberger 2732c4e45b netfilter: ctnetlink: allocate right-sized ctnetlink skb
Try to allocate a Netlink skb roughly the size of the actual
message, with the help from the l3 and l4 protocol helpers.
This is all to prevent a reallocation in netlink_trim() later.

The overhead of allocating the right-sized skb is rather small, with
ctnetlink_alloc_skb() actually being inlined away on my x86_64 box.
The size of the per-proto space is determined at registration time of
the protocol helper.

Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-25 21:50:59 +01:00
Eric Dumazet ea781f197d netfilter: nf_conntrack: use SLAB_DESTROY_BY_RCU and get rid of call_rcu()
Use "hlist_nulls" infrastructure we added in 2.6.29 for RCUification of UDP & TCP.

This permits an easy conversion from call_rcu() based hash lists to a
SLAB_DESTROY_BY_RCU one.

Avoiding call_rcu() delay at nf_conn freeing time has numerous gains.

First, it doesnt fill RCU queues (up to 10000 elements per cpu).
This reduces OOM possibility, if queued elements are not taken into account
This reduces latency problems when RCU queue size hits hilimit and triggers
emergency mode.

- It allows fast reuse of just freed elements, permitting better use of
CPU cache.

- We delete rcu_head from "struct nf_conn", shrinking size of this structure
by 8 or 16 bytes.

This patch only takes care of "struct nf_conn".
call_rcu() is still used for less critical conntrack parts, that may
be converted later if necessary.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-25 21:05:46 +01:00
Patrick McHardy 1f9352ae22 netfilter: {ip,ip6,arp}_tables: fix incorrect loop detection
Commit e1b4b9f ([NETFILTER]: {ip,ip6,arp}_tables: fix exponential worst-case
search for loops) introduced a regression in the loop detection algorithm,
causing sporadic incorrectly detected loops.

When a chain has already been visited during the check, it is treated as
having a standard target containing a RETURN verdict directly at the
beginning in order to not check it again. The real target of the first
rule is then incorrectly treated as STANDARD target and checked not to
contain invalid verdicts.

Fix by making sure the rule does actually contain a standard target.

Based on patch by Francis Dupont <Francis_Dupont@isc.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-25 19:26:35 +01:00
Holger Eitzenberger af9d32ad67 netfilter: limit the length of the helper name
This is necessary in order to have an upper bound for Netlink
message calculation, which is not a problem at all, as there
are no helpers with a longer name.

Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-25 18:44:01 +01:00
Holger Eitzenberger e487eb99cf netlink: add nla_policy_len()
It calculates the max. length of a Netlink policy, which is usefull
for allocating Netlink buffers roughly the size of the actual
message.

Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-25 18:26:30 +01:00
Holger Eitzenberger d0dba7255b netfilter: ctnetlink: add callbacks to the per-proto nlattrs
There is added a single callback for the l3 proto helper.  The two
callbacks for the l4 protos are necessary because of the general
structure of a ctnetlink event, which is in short:

 CTA_TUPLE_ORIG
   <l3/l4-proto-attributes>
 CTA_TUPLE_REPLY
   <l3/l4-proto-attributes>
 CTA_ID
 ...
 CTA_PROTOINFO
   <l4-proto-attributes>
 CTA_TUPLE_MASTER
   <l3/l4-proto-attributes>

Therefore the formular is

 size := sizeof(generic-nlas) + 3 * sizeof(tuple_nlas) + sizeof(protoinfo_nlas)

Some of the NLAs are optional, e. g. CTA_TUPLE_MASTER, which is only
set if it's an expected connection.  But the number of optional NLAs is
small enough to prevent netlink_trim() from reallocating if calculated
properly.

Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-25 18:24:48 +01:00
Eric Dumazet b8dfe49877 netfilter: factorize ifname_compare()
We use same not trivial helper function in four places. We can factorize it.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-25 17:31:52 +01:00
Eric Dumazet 78f3648601 netfilter: nf_conntrack: use hlist_add_head_rcu() in nf_conntrack_set_hashsize()
Using hlist_add_head() in nf_conntrack_set_hashsize() is quite dangerous.
Without any barrier, one CPU could see a loop while doing its lookup.
Its true new table cannot be seen by another cpu, but previous table is still
readable.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-25 17:24:34 +01:00
Patrick McHardy a9a9adfe2f netfilter: fix xt_LED build failure
net/netfilter/xt_LED.c:40: error: field netfilter_led_trigger has incomplete type
net/netfilter/xt_LED.c: In function led_timeout_callback:
net/netfilter/xt_LED.c:78: warning: unused variable ledinternal
net/netfilter/xt_LED.c: In function led_tg_check:
net/netfilter/xt_LED.c:102: error: implicit declaration of function led_trigger_register
net/netfilter/xt_LED.c: In function led_tg_destroy:
net/netfilter/xt_LED.c:135: error: implicit declaration of function led_trigger_unregister

Fix by adding a dependency on LED_TRIGGERS.

Reported-by: Sachin Sant <sachinp@in.ibm.com>
Tested-by: Subrata Modak <tosubrata@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-25 17:21:34 +01:00
Vlad Yasevich b2f5e7cd3d ipv6: Fix conflict resolutions during ipv6 binding
The ipv6 version of bind_conflict code calls ipv6_rcv_saddr_equal()
which at times wrongly identified intersections between addresses.
It particularly broke down under a few instances and caused erroneous
bind conflicts.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24 19:49:11 -07:00
Vlad Yasevich 63d9950b08 ipv6: Make v4-mapped bindings consistent with IPv4
Binding to a v4-mapped address on an AF_INET6 socket should
produce the same result as binding to an IPv4 address on
AF_INET socket.  The two are interchangable as v4-mapped
address is really a portability aid.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24 19:49:10 -07:00
Vlad Yasevich 0f8d3c7ac3 ipv6: Allow ipv4 wildcard binds after ipv6 address binds
The IPv4 wildcard (0.0.0.0) address does not intersect
in any way with explicit IPv6 addresses.  These two should
be permitted, but the IPv4 conflict code checks the ipv6only
bit as part of the test.  Since binding to an explicit IPv6
address restricts the socket to only that IPv6 address, the
side-effect is that the socket behaves as v6-only.  By
explicitely setting ipv6only in this case, allows the 2 binds
to succeed.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24 19:49:10 -07:00
Vlad Yasevich 783ed5a783 ipv6: Disallow binding to v4-mapped address on v6-only socket.
A socket marked v6-only, can not receive or send traffic to v4-mapped
addresses.  Thus allowing binding to v4-mapped address on such a
socket makes no sense.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24 19:49:09 -07:00
David S. Miller c80dd2da73 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6 2009-03-24 16:38:53 -07:00
Jason Baron e9d376f0fa dynamic debug: combine dprintk and dynamic printk
This patch combines Greg Bank's dprintk() work with the existing dynamic
printk patchset, we are now calling it 'dynamic debug'.

The new feature of this patchset is a richer /debugfs control file interface,
(an example output from my system is at the bottom), which allows fined grained
control over the the debug output. The output can be controlled by function,
file, module, format string, and line number.

for example, enabled all debug messages in module 'nf_conntrack':

echo -n 'module nf_conntrack +p' > /mnt/debugfs/dynamic_debug/control

to disable them:

echo -n 'module nf_conntrack -p' > /mnt/debugfs/dynamic_debug/control

A further explanation can be found in the documentation patch.

Signed-off-by: Greg Banks <gnb@sgi.com>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:38:26 -07:00
Cornelia Huck ffa6a7054d Driver core: Fix device_move() vs. dpm list ordering, v2
dpm_list currently relies on the fact that child devices will
be registered after their parents to get a correct suspend
order. Using device_move() however destroys this assumption, as
an already registered device may be moved under a newly registered
one.

This patch adds a new argument to device_move(), allowing callers
to specify how dpm_list should be adapted.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:38:26 -07:00
Pablo Neira Ayuso 38938bfe34 netlink: add NETLINK_NO_ENOBUFS socket flag
This patch adds the NETLINK_NO_ENOBUFS socket flag. This flag can
be used by unicast and broadcast listeners to avoid receiving
ENOBUFS errors.

Generally speaking, ENOBUFS errors are useful to notify two things
to the listener:

a) You may increase the receiver buffer size via setsockopt().
b) You have lost messages, you may be out of sync.

In some cases, ignoring ENOBUFS errors can be useful. For example:

a) nfnetlink_queue: this subsystem does not have any sort of resync
method and you can decide to ignore ENOBUFS once you have set a
given buffer size.

b) ctnetlink: you can use this together with the socket flag
NETLINK_BROADCAST_SEND_ERROR to stop getting ENOBUFS errors as
you do not need to resync (packets whose event are not delivered
are drop to provide reliable logging and state-synchronization).

Moreover, the use of NETLINK_NO_ENOBUFS also reduces a "go up, go down"
effect in terms of performance which is due to the netlink congestion
control when the listener cannot back off. The effect is the following:

1) throughput rate goes up and netlink messages are inserted in the
receiver buffer.
2) Then, netlink buffer fills and overruns (set on nlk->state bit 0).
3) While the listener empties the receiver buffer, netlink keeps
dropping messages. Thus, throughput goes dramatically down.
4) Then, once the listener has emptied the buffer (nlk->state
bit 0 is set off), goto step 1.

This effect is easy to trigger with netlink broadcast under heavy
load, and it is more noticeable when using a big receiver buffer.
You can find some results in [1] that show this problem.

[1] http://1984.lsi.us.es/linux/netlink/

This patch also includes the use of sk_drop to account the number of
netlink messages drop due to overrun. This value is shown in
/proc/net/netlink.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24 16:37:55 -07:00
Eric Dumazet 35c7f6de73 arp_tables: ifname_compare() can assume 16bit alignment
Arches without efficient unaligned access can still perform a loop
assuming 16bit alignment in ifname_compare()

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24 14:15:22 -07:00
Jan Engelhardt 8dd1d0471b netfilter: trivial Kconfig spelling fixes
Supplements commit 67c0d57930.

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24 13:35:27 -07:00
David S. Miller b5bb14386e Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-next-2.6 2009-03-24 13:24:36 -07:00
Eric Dumazet 1d45209d89 netfilter: nf_conntrack: Reduce conntrack count in nf_conntrack_free()
We use RCU to defer freeing of conntrack structures. In DOS situation, RCU might
accumulate about 10.000 elements per CPU in its internal queues. To get accurate
conntrack counts (at the expense of slightly more RAM used), we might consider
conntrack counter not taking into account "about to be freed elements, waiting
in RCU queues". We thus decrement it in nf_conntrack_free(), not in the RCU
callback.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Tested-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-24 14:26:50 +01:00
Vitaly Mayatskikh 30842f2989 udp: Wrong locking code in udp seq_file infrastructure
Reading zero bytes from /proc/net/udp or other similar files which use
the same seq_file udp infrastructure panics kernel in that way:

=====================================
[ BUG: bad unlock balance detected! ]
-------------------------------------
read/1985 is trying to release lock (&table->hash[i].lock) at:
[<ffffffff81321d83>] udp_seq_stop+0x27/0x29
but there are no more locks to release!

other info that might help us debug this:
1 lock held by read/1985:
 #0:  (&p->lock){--..}, at: [<ffffffff810eefb6>] seq_read+0x38/0x348

stack backtrace:
Pid: 1985, comm: read Not tainted 2.6.29-rc8 #9
Call Trace:
 [<ffffffff81321d83>] ? udp_seq_stop+0x27/0x29
 [<ffffffff8106dab9>] print_unlock_inbalance_bug+0xd6/0xe1
 [<ffffffff8106db62>] lock_release_non_nested+0x9e/0x1c6
 [<ffffffff810ef030>] ? seq_read+0xb2/0x348
 [<ffffffff8106bdba>] ? mark_held_locks+0x68/0x86
 [<ffffffff81321d83>] ? udp_seq_stop+0x27/0x29
 [<ffffffff8106dde7>] lock_release+0x15d/0x189
 [<ffffffff8137163c>] _spin_unlock_bh+0x1e/0x34
 [<ffffffff81321d83>] udp_seq_stop+0x27/0x29
 [<ffffffff810ef239>] seq_read+0x2bb/0x348
 [<ffffffff810eef7e>] ? seq_read+0x0/0x348
 [<ffffffff8111aedd>] proc_reg_read+0x90/0xaf
 [<ffffffff810d878f>] vfs_read+0xa6/0x103
 [<ffffffff8106bfac>] ? trace_hardirqs_on_caller+0x12f/0x153
 [<ffffffff810d88a2>] sys_read+0x45/0x69
 [<ffffffff8101123a>] system_call_fastpath+0x16/0x1b
BUG: scheduling while atomic: read/1985/0xffffff00
INFO: lockdep is turned off.
Modules linked in: cpufreq_ondemand acpi_cpufreq freq_table dm_multipath kvm ppdev snd_hda_codec_analog snd_hda_intel snd_hda_codec snd_hwdep snd_seq_dummy snd_seq_oss snd_seq_midi_event arc4 snd_s
eq ecb thinkpad_acpi snd_seq_device iwl3945 hwmon sdhci_pci snd_pcm_oss sdhci rfkill mmc_core snd_mixer_oss i2c_i801 mac80211 yenta_socket ricoh_mmc i2c_core iTCO_wdt snd_pcm iTCO_vendor_support rs
rc_nonstatic snd_timer snd lib80211 cfg80211 soundcore snd_page_alloc video parport_pc output parport e1000e [last unloaded: scsi_wait_scan]
Pid: 1985, comm: read Not tainted 2.6.29-rc8 #9
Call Trace:
 [<ffffffff8106b456>] ? __debug_show_held_locks+0x1b/0x24
 [<ffffffff81043660>] __schedule_bug+0x7e/0x83
 [<ffffffff8136ede9>] schedule+0xce/0x838
 [<ffffffff810d7972>] ? fsnotify_access+0x5f/0x67
 [<ffffffff810112d0>] ? sysret_careful+0xb/0x37
 [<ffffffff8106be9c>] ? trace_hardirqs_on_caller+0x1f/0x153
 [<ffffffff8137127b>] ? trace_hardirqs_on_thunk+0x3a/0x3f
 [<ffffffff810112f6>] sysret_careful+0x31/0x37
read[1985]: segfault at 7fffc479bfe8 ip 0000003e7420a180 sp 00007fffc479bfa0 error 6
Kernel panic - not syncing: Aiee, killing interrupt handler!

udp_seq_stop() tries to unlock not yet locked spinlock. The lock was lost
during splitting global udp_hash_lock to subsequent spinlocks.

Signed-off by: Vitaly Mayatskikh <v.mayatskih@gmail.com>
Acked-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-23 15:22:33 -07:00
David S. Miller 8be7cdccac Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/ucc_geth.c
2009-03-23 13:35:04 -07:00
Linus Torvalds d56ffd38a9 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (32 commits)
  ucc_geth: Fix oops when using fixed-link support
  dm9000: locking bugfix
  net: update dnet.c for bus_id removal
  dnet: DNET should depend on HAS_IOMEM
  dca: add missing copyright/license headers
  nl80211: Check that function pointer != NULL before using it
  sungem: missing net_device_ops
  be2net: fix to restore vlan ids into BE2 during a IF DOWN->UP cycle
  be2net: replenish when posting to rx-queue is starved in out of mem conditions
  bas_gigaset: correctly allocate USB interrupt transfer buffer
  smsc911x: reset last known duplex and carrier on open
  sh_eth: Fix mistake of the address of SH7763
  sh_eth: Change handling of IRQ
  netns: oops in ip[6]_frag_reasm incrementing stats
  net: kfree(napi->skb) => kfree_skb
  net: fix sctp breakage
  ipv6: fix display of local and remote sit endpoints
  net: Document /proc/sys/net/core/netdev_budget
  tulip: fix crash on iface up with shirq debug
  virtio_net: Make virtio_net support carrier detection
  ...
2009-03-23 09:25:58 -07:00
Mark H. Weaver 534f81a506 netfilter: nf_conntrack_tcp: fix unaligned memory access in tcp_sack
This patch fixes an unaligned memory access in tcp_sack while reading
sequence numbers from TCP selective acknowledgement options.  Prior to
applying this patch, upstream linux-2.6.27.20 was occasionally
generating messages like this on my sparc64 system:

  [54678.532071] Kernel unaligned access at TPC[6b17d4] tcp_packet+0xcd4/0xd00

Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-23 13:46:12 +01:00
Pablo Neira Ayuso dd5b6ce6fd nefilter: nfnetlink: add nfnetlink_set_err and use it in ctnetlink
This patch adds nfnetlink_set_err() to propagate the error to netlink
broadcast listener in case of memory allocation errors in the
message building.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-23 13:21:06 +01:00
Eric Leblond 176252746e netfilter: sysctl support of logger choice
This patchs adds support of modification of the used logger via sysctl.
It can be used to change the logger to module that can not use the bind
operation (ipt_LOG and ipt_ULOG). For this purpose, it creates a
directory /proc/sys/net/netfilter/nf_log which contains a file
per-protocol. The content of the file is the name current logger (NONE if
not set) and a logger can be setup by simply echoing its name to the file.
By echoing "NONE" to a /proc/sys/net/netfilter/nf_log/PROTO file, the
logger corresponding to this PROTO is set to NULL.

Signed-off-by: Eric Leblond <eric@inl.fr>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-23 13:16:53 +01:00
John Dykstra 96e0bf4b51 tcp: Discard segments that ack data not yet sent
Discard incoming packets whose ack field iincludes data not yet sent.
This is consistent with RFC 793 Section 3.9.

Change tcp_ack() to distinguish between too-small and too-large ack
field values.  Keep segments with too-large ack fields out of the fast
path, and change slow path to discard them.

Reported-by:  Oliver Zheng <mailinglists+netdev@oliverzheng.com>
Signed-off-by: John Dykstra <john.dykstra1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-22 21:49:57 -07:00
Stephen Hemminger d44c3a2e0e netdev: expose net_device_ops compat as config option
Now that most network device drivers in (all but one in x86_64 allmodconfig)
support net_device_ops. Expose it as a configuration parameter. Still
need to address even older 32 bit drivers, and other arch before
compatiablity can be scheduled for removal in some future release.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 22:55:36 -07:00
Stephen Hemminger 9cc8ba783d irlan: convert to net_device_ops
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 19:19:16 -07:00
Stephen Hemminger 92bcd4fe9a irda: net_device_ops ioctl fix
Need to reference net_device_ops not old pointer.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 19:19:14 -07:00
Stephen Hemminger dde0975855 atm: convert clip driver to net_device_ops
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 19:19:12 -07:00
Stephen Hemminger 788dee0a95 atm: convert mpc device to using netdev_ops
This converts the mpc device to using new netdevice_ops.
Compile tested only, needs more than usual review since
device was swaping pointers around etc.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Chas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 19:19:12 -07:00
Lennert Buytenhek e84665c9cb dsa: add switch chip cascading support
The initial version of the DSA driver only supported a single switch
chip per network interface, while DSA-capable switch chips can be
interconnected to form a tree of switch chips.  This patch adds support
for multiple switch chips on a network interface.

An example topology for a 16-port device with an embedded CPU is as
follows:

	+-----+          +--------+       +--------+
	|     |eth0    10| switch |9    10| switch |
	| CPU +----------+        +-------+        |
	|     |          | chip 0 |       | chip 1 |
	+-----+          +---++---+       +---++---+
	                     ||               ||
	                     ||               ||
	                     ||1000baseT      ||1000baseT
	                     ||ports 1-8      ||ports 9-16

This requires a couple of interdependent changes in the DSA layer:

- The dsa platform driver data needs to be extended: there is still
  only one netdevice per DSA driver instance (eth0 in the example
  above), but each of the switch chips in the tree needs its own
  mii_bus device pointer, MII management bus address, and port name
  array. (include/net/dsa.h)  The existing in-tree dsa users need
  some small changes to deal with this. (arch/arm)

- The DSA and Ethertype DSA tagging modules need to be extended to
  use the DSA device ID field on receive and demultiplex the packet
  accordingly, and fill in the DSA device ID field on transmit
  according to which switch chip the packet is heading to.
  (net/dsa/tag_{dsa,edsa}.c)

- The concept of "CPU port", which is the switch chip port that the
  CPU is connected to (port 10 on switch chip 0 in the example), needs
  to be extended with the concept of "upstream port", which is the
  port on the switch chip that will bring us one hop closer to the CPU
  (port 10 for both switch chips in the example above).

- The dsa platform data needs to specify which ports on which switch
  chips are links to other switch chips, so that we can enable DSA
  tagging mode on them.  (For inter-switch links, we always use
  non-EtherType DSA tagging, since it has lower overhead.  The CPU
  link uses dsa or edsa tagging depending on what the 'root' switch
  chip supports.)  This is done by specifying "dsa" for the given
  port in the port array.

- The dsa platform data needs to be extended with information on via
  which port to reach any given switch chip from any given switch chip.
  This info is specified via the per-switch chip data struct ->rtable[]
  array, which gives the nexthop ports for each of the other switches
  in the tree.

For the example topology above, the dsa platform data would look
something like this:

	static struct dsa_chip_data sw[2] = {
		{
			.mii_bus	= &foo,
			.sw_addr	= 1,
			.port_names[0]	= "p1",
			.port_names[1]	= "p2",
			.port_names[2]	= "p3",
			.port_names[3]	= "p4",
			.port_names[4]	= "p5",
			.port_names[5]	= "p6",
			.port_names[6]	= "p7",
			.port_names[7]	= "p8",
			.port_names[9]	= "dsa",
			.port_names[10]	= "cpu",
			.rtable		= (s8 []){ -1, 9, },
		}, {
			.mii_bus	= &foo,
			.sw_addr	= 2,
			.port_names[0]	= "p9",
			.port_names[1]	= "p10",
			.port_names[2]	= "p11",
			.port_names[3]	= "p12",
			.port_names[4]	= "p13",
			.port_names[5]	= "p14",
			.port_names[6]	= "p15",
			.port_names[7]	= "p16",
			.port_names[10]	= "dsa",
			.rtable		= (s8 []){ 10, -1, },
		},
	},

	static struct dsa_platform_data pd = {
		.netdev		= &foo,
		.nr_switches	= 2,
		.sw		= sw,
	};

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Tested-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 19:06:54 -07:00
Lennert Buytenhek 076d3e10a5 dsa: add support for the Marvell 88E6095/6095F switch chips
Add support for the Marvell 88E6095/6095F switch chips.  These
chips are similar to the 88e6131, so we can add the support to
mv88e6131.c easily.

Thanks to Gary Thomas <gary@mlbassoc.com> and Jesper Dangaard
Brouer <hawk@diku.dk> for testing various patches.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Tested-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 19:06:54 -07:00
Lennert Buytenhek c084080151 dsa: set ->iflink on slave interfaces to the ifindex of the parent
..so that we can parse the DSA topology from 'ip link' output:

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
4: lan1@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
5: lan2@eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue
6: lan3@eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue
7: lan4@eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 19:06:53 -07:00
Stephen Hemminger fa665ccf01 ipx: use constant for strings and desciptor
Fix compiler warning about non-const format string.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 19:06:51 -07:00
Stephen Hemminger 7ca98fa234 snap: use const for descriptor
Protocols should be able to use constant value for the descriptor.
Minor whitespace cleanup as well

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 19:06:50 -07:00
Eric Dumazet ed734a97c6 net: remove useless prefetch() call
There is no gain using prefetch() in dev_hard_start_xmit(), since
we already had to read ops->ndo_select_queue pointer in dev_pick_tx(),
and both pointers are probably located in the same cache line.

This prefetch call slows down fast path because of a stall in address
computation.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 13:42:55 -07:00
Vlad Yasevich 8d2f9e8116 sctp: Clean up TEST_FRAME hacks.
Remove 2 TEST_FRAME hacks that are no longer needed.  These allowed
sctp regression tests to compile before, but are no longer needed.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 13:41:09 -07:00
Stephen Hemminger 9247744e5e skb: expose and constify hash primitives
Some minor changes to queue hashing:
 1. Use const on accessor functions
 2. Export skb_tx_hash for use in drivers (see ixgbe)

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 13:39:26 -07:00
Stephen Hemminger 1f1900f935 atm: lec use dev_change_mtu
Rather than calling device pointer directly (which is incorrect with
net_device_ops), use the standard dev_change_mtu. Compile tested only.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 13:37:28 -07:00
Ilpo Järvinen a0bffffc14 net/*: use linux/kernel.h swap()
tcp_sack_swap seems unnecessary so I pushed swap to the caller.
Also removed comment that seemed then pointless, and added include
when not already there. Compile tested.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 13:36:17 -07:00
Bernard Pidoux a3ac80a130 netrom: zero length frame filtering in NetRom
A zero length frame filter was recently introduced in ROSE protocole.
Previous commit makes the same at AX25 protocole level.
This patch has the same purpose for NetRom  protocole.
The reason is that empty frames have no meaning in NetRom protocole.

Signed-off-by: Bernard Pidoux <f6bvp@amsat.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 13:34:20 -07:00
Bernard Pidoux f99bcff7a2 ax25: zero length frame filtering in AX25
In previous commit 244f46ae6e
was introduced a zero length frame filter for ROSE protocole.
This patch has the same purpose at AX25 frame level for the same
reason. Empty frames have no meaning in AX25 protocole.

Signed-off-by: Bernard Pidoux <f6bvp@amsat.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 13:33:55 -07:00
Bernard Pidoux 60784427ab ax25: SOCK_DEBUG message simplification
This patch condenses two debug messages in one.

Signed-off-by: Bernard Pidoux <f6bvp@amsat.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 13:33:18 -07:00
Jouni Malinen f3f9258678 nl80211: Check that function pointer != NULL before using it
NL80211_CMD_GET_MESH_PARAMS and NL80211_CMD_SET_MESH_PARAMS handlers
did not verify whether a function pointer is NULL (not supported by
the driver) before trying to call the function. The former nl80211
command is available for unprivileged users, too, so this can
potentially allow normal users to kill networking (or worse..) if
mac80211 is built without CONFIG_MAC80211_MESH=y.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-20 16:01:57 -04:00
David S. Miller 2b1c4354de Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/virtio_net.c
2009-03-20 02:27:41 -07:00
Tom Talpey 2e3c230bc7 SVCRDMA: fix recent printk format warnings.
printk formats in prior commit were reversed/incorrect.
Compiled without warning on x86 and x86_64, but detected on ppc.

Signed-off-by: Tom Talpey <tmtalpey@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-19 15:17:37 -04:00
Trond Myklebust 55420c24a0 SUNRPC: Ensure we close the socket on EPIPE errors too...
As long as one task is holding the socket lock, then calls to
xprt_force_disconnect(xprt) will not succeed in shutting down the socket.
In particular, this would mean that a server initiated shutdown will not
succeed until the lock is relinquished.
In order to avoid the deadlock, we should ensure that xs_tcp_send_request()
closes the socket on EPIPE errors too.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-19 15:17:36 -04:00
Trond Myklebust b61d59fffd SUNRPC: xs_tcp_connect_worker{4,6}: merge common code
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-19 15:17:35 -04:00
Trond Myklebust 25fe6142a5 SUNRPC: Add a sysctl to control the duration of the socket linger timeout
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-19 15:17:34 -04:00
Trond Myklebust 7d1e8255cf SUNRPC: Add the equivalent of the linger and linger2 timeouts to RPC sockets
This fixes a regression against FreeBSD servers as reported by Tomas
Kasparek. Apparently when using RPC over a TCP socket, the FreeBSD servers
don't ever react to the client closing the socket, and so commit
e06799f958 (SUNRPC: Use shutdown() instead of
close() when disconnecting a TCP socket) causes the setup to hang forever
whenever the client attempts to close and then reconnect.

We break the deadlock by adding a 'linger2' style timeout to the socket,
after which, the client will abort the connection using a TCP 'RST'.

The default timeout is set to 15 seconds. A subsequent patch will put it
under user control by means of a systctl.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-19 15:17:34 -04:00
Jorge Boncompte [DTI2] 2bad35b7c9 netns: oops in ip[6]_frag_reasm incrementing stats
dev can be NULL in ip[6]_frag_reasm for skb's coming from RAW sockets.

Quagga's OSPFD sends fragmented packets on a RAW socket, when netfilter
conntrack reassembles them on the OUTPUT path you hit this code path.

You can test it with something like "hping2 -0 -d 2000 -f AA.BB.CC.DD"

With help from Jarek Poplawski.

Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-18 23:26:11 -07:00
Roel Kluin e4a389a9b5 net: kfree(napi->skb) => kfree_skb
struct sk_buff pointers should be freed with kfree_skb.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-18 23:12:13 -07:00
Al Viro cb0dc77de0 net: fix sctp breakage
broken by commit 5e739d1752aca4e8f3e794d431503bfca3162df4; AFAICS should
be -stable fodder as well...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Aced-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-18 19:12:42 -07:00
Stephen Hemminger 4b704d59d6 tipc: fix non-const printf format arguments
Fix warnings from current gcc about using non-const strings as printf
args in TIPC. Compile tested only (not a TIPC user).

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-18 19:11:29 -07:00
Bjørn Mork 1b1d8f73a4 ipv6: fix display of local and remote sit endpoints
This fixes the regressions cause by
commit 1326c3d5a4
(v2.6.28-rc6-461-g23a12b1) broke the display of local and remote
addresses of an SIT tunnel in iproute2.

nt->parms is used by ipip6_tunnel_init() and therefore need to be
initialized first.

Tracked as http://bugzilla.kernel.org/show_bug.cgi?id=12868

Reported-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-18 18:56:54 -07:00
Rami Rosen beedad923a tcp: remove parameter from tcp_recv_urg().
This patch removes an unused parameter (addr_len) from tcp_recv_urg()
method in net/ipv4/tcp.c.

Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-18 18:50:09 -07:00
Brian Haley 9bdd8d40c8 ipv6: Fix incorrect disable_ipv6 behavior
Fix the behavior of allowing both sysctl and addrconf_dad_failure()
to set the disable_ipv6 parameter without any bad side-effects.
If DAD fails and accept_dad > 1, we will still set disable_ipv6=1,
but then instead of allowing an RA to add an address then
immediately fail DAD, we simply don't allow the address to be
added in the first place.  This also lets the user set this flag
and disable all IPv6 addresses on the interface, or on the entire
system.

Signed-off-by: Brian Haley <brian.haley@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-18 18:22:48 -07:00
Olga Kornievskaia 47a14ef1af svcrpc: take advantage of tcp autotuning
Allow the NFSv4 server to make use of TCP autotuning behaviour, which
was previously disabled by setting the sk_userlocks variable.

Set the receive buffers to be big enough to receive the whole RPC
request, and set this for the listening socket, not the accept socket.

Remove the code that readjusts the receive/send buffer sizes for the
accepted socket. Previously this code was used to influence the TCP
window management behaviour, which is no longer needed when autotuning
is enabled.

This can improve IO bandwidth on networks with high bandwidth-delay
products, where a large tcp window is required.  It also simplifies
performance tuning, since getting adequate tcp buffers previously
required increasing the number of nfsd threads.

Signed-off-by: Olga Kornievskaia <aglo@citi.umich.edu>
Cc: Jim Rees <rees@umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-03-18 17:46:59 -04:00
Greg Banks 03cf6c9f49 knfsd: add file to export stats about nfsd pools
Add /proc/fs/nfsd/pool_stats to export to userspace various
statistics about the operation of rpc server thread pools.

This patch is based on a forward-ported version of
knfsd-add-pool-thread-stats which has been shipping in the SGI
"Enhanced NFS" product since 2006 and which was previously
posted:

http://article.gmane.org/gmane.linux.nfs/10375

It has also been updated thus:

 * moved EXPORT_SYMBOL() to near the function it exports
 * made the new struct struct seq_operations const
 * used SEQ_START_TOKEN instead of ((void *)1)
 * merged fix from SGI PV 990526 "sunrpc: use dprintk instead of
   printk in svc_pool_stats_*()" by Harshula Jayasuriya.
 * merged fix from SGI PV 964001 "Crash reading pool_stats before
   nfsds are started".

Signed-off-by: Greg Banks <gnb@sgi.com>
Signed-off-by: Harshula Jayasuriya <harshula@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-03-18 17:38:42 -04:00
Greg Banks 59a252ff8c knfsd: avoid overloading the CPU scheduler with enormous load averages
Avoid overloading the CPU scheduler with enormous load averages
when handling high call-rate NFS loads.  When the knfsd bottom half
is made aware of an incoming call by the socket layer, it tries to
choose an nfsd thread and wake it up.  As long as there are idle
threads, one will be woken up.

If there are lot of nfsd threads (a sensible configuration when
the server is disk-bound or is running an HSM), there will be many
more nfsd threads than CPUs to run them.  Under a high call-rate
low service-time workload, the result is that almost every nfsd is
runnable, but only a handful are actually able to run.  This situation
causes two significant problems:

1. The CPU scheduler takes over 10% of each CPU, which is robbing
   the nfsd threads of valuable CPU time.

2. At a high enough load, the nfsd threads starve userspace threads
   of CPU time, to the point where daemons like portmap and rpc.mountd
   do not schedule for tens of seconds at a time.  Clients attempting
   to mount an NFS filesystem timeout at the very first step (opening
   a TCP connection to portmap) because portmap cannot wake up from
   select() and call accept() in time.

Disclaimer: these effects were observed on a SLES9 kernel, modern
kernels' schedulers may behave more gracefully.

The solution is simple: keep in each svc_pool a counter of the number
of threads which have been woken but have not yet run, and do not wake
any more if that count reaches an arbitrary small threshold.

Testing was on a 4 CPU 4 NIC Altix using 4 IRIX clients, each with 16
synthetic client threads simulating an rsync (i.e. recursive directory
listing) workload reading from an i386 RH9 install image (161480
regular files in 10841 directories) on the server.  That tree is small
enough to fill in the server's RAM so no disk traffic was involved.
This setup gives a sustained call rate in excess of 60000 calls/sec
before being CPU-bound on the server.  The server was running 128 nfsds.

Profiling showed schedule() taking 6.7% of every CPU, and __wake_up()
taking 5.2%.  This patch drops those contributions to 3.0% and 2.2%.
Load average was over 120 before the patch, and 20.9 after.

This patch is a forward-ported version of knfsd-avoid-nfsd-overload
which has been shipping in the SGI "Enhanced NFS" product since 2006.
It has been posted before:

http://article.gmane.org/gmane.linux.nfs/10374

Signed-off-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-03-18 17:38:41 -04:00
Patrick McHardy 0f5b3e85a3 netfilter: ctnetlink: fix rcu context imbalance
Introduced by 7ec47496 (netfilter: ctnetlink: cleanup master conntrack assignation):

net/netfilter/nf_conntrack_netlink.c:1275:2: warning: context imbalance in 'ctnetlink_create_conntrack' - different lock contexts for basic block

Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-18 17:36:40 +01:00
Florian Westphal 711d60a9e7 netfilter: remove nf_ct_l4proto_find_get/nf_ct_l4proto_put
users have been moved to __nf_ct_l4proto_find.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-18 17:30:50 +01:00
Florian Westphal cd91566e4b netfilter: ctnetlink: remove remaining module refcounting
Convert the remaining refcount users.

As pointed out by Patrick McHardy, the protocols can be accessed safely using RCU.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-18 17:28:37 +01:00
David S. Miller af4330631c Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 2009-03-17 15:04:31 -07:00
David S. Miller 2d6a5e9500 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/igb/igb_main.c
	drivers/net/qlge/qlge_main.c
	drivers/net/wireless/ath9k/ath9k.h
	drivers/net/wireless/ath9k/core.h
	drivers/net/wireless/ath9k/hw.c
2009-03-17 15:01:30 -07:00
David S. Miller f10023a4ef Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 2009-03-17 14:29:22 -07:00
David S. Miller 4ada8107f4 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6 2009-03-17 13:12:47 -07:00
Herbert Xu 303c6a0251 gro: Fix legacy path napi_complete crash
On the legacy netif_rx path, I incorrectly tried to optimise
the napi_complete call by using __napi_complete before we reenable
IRQs.  This simply doesn't work since we need to flush the held
GRO packets first.

This patch fixes it by doing the obvious thing of reenabling
IRQs first and then calling napi_complete.

Reported-by: Frank Blaschka <blaschka@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-17 13:11:29 -07:00
Herbert Xu 2ffb455819 gro: Fix vlan/netpoll check again
Jarek Poplawski pointed out that my previous fix is broken for
VLAN+netpoll as if netpoll is enabled we'd end up in the normal
receive path instead of the VLAN receive path.

This patch fixes it by calling the VLAN receive hook.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-17 13:10:52 -07:00
Luis R. Rodriguez 73d54c9e74 cfg80211: add regulatory netlink multicast group
This allows us to send to userspace "regulatory" events.
For now we just send an event when we change regulatory domains.
We also notify userspace when devices are using their own custom
world roaming regulatory domains.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16 18:09:40 -04:00
Luis R. Rodriguez 7db90f4a25 cfg80211: move enum reg_set_by to nl80211.h
We do this so we can later inform userspace who set the
regulatory domain and provide details of the request.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16 18:09:40 -04:00
Luis R. Rodriguez 0fee54cab7 cfg80211: remove REGDOM_SET_BY_INIT
This is not used as we can always just assume the first
regulatory domain set will _always_ be a static regulatory
domain. REGDOM_SET_BY_CORE will be the first request from
cfg80211 for a regdomain and that then populates the first
regulatory request.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16 18:09:39 -04:00
Herton Ronaldo Krzesinski 1a28c78b46 mac80211: deauth before flushing STA information
Even after commit "mac80211: deauth when interface is marked down"
(e327b847 on Linus tree), userspace still isn't notified when interface
goes down. There isn't a problem with this commit, but because of other
code changes it doesn't work on kernels >= 2.6.28 (works if same/similar
change applied on 2.6.27 for example).

The issue is as follows: after commit "mac80211: restructure disassoc/deauth
flows" in 2.6.28, the call to ieee80211_sta_deauthenticate added by
commit e327b847 will not work: because we do sta_info_flush(local, sdata)
inside ieee80211_stop (iface.c), all stations in interface are cleared, so
when calling ieee80211_sta_deauthenticate->ieee80211_set_disassoc (mlme.c),
inside ieee80211_set_disassoc we have this in the beginning:

         sta = sta_info_get(local, ifsta->bssid);
         if (!sta) {

The !sta check triggers, thus the function returns early and
ieee80211_sta_send_apinfo(sdata, ifsta) later isn't called, so
wpa_supplicant/userspace isn't notified with SIOCGIWAP.

This commit moves deauthentication to before flushing STA info
(sta_info_flush), thus the above can't happen and userspace is really
notified when interface goes down.

Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16 18:09:39 -04:00
Helmut Schaa af88b9078d mac80211: handle failed scan requests in STA mode
If cfg80211 requests a scan it awaits either a return code != 0 from
the scan function or the cfg80211_scan_done to be called. In case of
a STA mac80211's scan function ever returns 0 and queues the scan request.
If ieee80211_sta_work is executed and ieee80211_start_scan fails for
some reason cfg80211_scan_done will never be called but cfg80211 still
thinks the scan was triggered successfully and will refuse any future
scan requests due to drv->scan_req not being cleaned up.

If a scan is triggered from within the MLME a similar problem appears. If
ieee80211_start_scan returns an error, local->scan_req will not be reset
and mac80211 will refuse any future scan requests.

Hence, in both cases call ieee80211_scan_failed (which notifies cfg80211
and resets local->scan_req) if ieee80211_start_scan returns an error.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16 18:09:38 -04:00
Luis R. Rodriguez ec329acef9 cfg80211: fix max tx power for world regdom on 5 GHz to 20dBm
This is the lowest value amongst countries which do enable 5 GHz operation.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16 18:09:29 -04:00
Luis R. Rodriguez 611b6a82aa cfg80211: Enable passive scan on channels 12-14 for world roaming
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16 18:09:29 -04:00
Jouni Malinen 0eeb59fe2c mac80211: Fix WMM ACM parsing and AC downgrade operation
Incorrect local->wmm_acm bits were set for AC_BK and AC_BE. Fix this
and add some comments to make it easier to understand the AC-to-UP(pair)
mapping. Set the wmm_acm bits (and show WMM debug) even if the driver
does not implement conf_tx() handler.

In addition, fix the ACM-based AC downgrade code to not use the
highest priority in error cases. We need to break the loop to get the
correct AC_BK value (3) instead of returning 0 (which would indicate
AC_VO). The comment here was not really very useful either, so let's
provide somewhat more helpful description of the situation.

Since it is very unlikely that the ACM flag would be set for AC_BK and
AC_BE, these bugs are not likely to be seen in real life networks.
Anyway, better do these things correctly should someone really use
silly AP configuration (and to pass some functionality tests, too).

Remove the TODO comment about handling ACM. Downgrading AC is
perfectly valid mechanism for ACM. Eventually, we may add support for
WMM-AC and send a request for a TS, but anyway, that functionality
won't be here at the location of this TODO comment.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16 18:09:27 -04:00
Jouni Malinen 055249d20d mac80211: Fix panic on fragmentation with power saving
It was possible to hit a kernel panic on NULL pointer dereference in
dev_queue_xmit() when sending power save buffered frames to a STA that
woke up from sleep. This happened when the buffered frame was requeued
for transmission in ap_sta_ps_end(). In order to avoid the panic, copy
the skb->dev and skb->iif values from the first fragment to all other
fragments.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16 18:01:59 -04:00
John W. Linville 6f16bf3bdb lib80211: silence excessive crypto debugging messages
When they were part of the now defunct ieee80211 component, these
messages were only visible when special debugging settings were enabled.
Let's mirror that with a new lib80211 debugging Kconfig option.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16 18:01:58 -04:00
Herbert Xu d1c76af9e2 GRO: Move netpoll checks to correct location
As my netpoll fix for net doesn't really work for net-next, we
need this update to move the checks into the right place.  As it
stands we may pass freed skbs to netpoll_receive_skb.

This patch also introduces a netpoll_rx_on function to avoid GRO
completely if we're invoked through netpoll.  This might seem
paranoid but as netpoll may have an external receive hook it's
better to be safe than sorry.  I don't think we need this for
2.6.29 though since there's nothing immediately broken by it.

This patch also moves the GRO_* return values to netdevice.h since
VLAN needs them too (I tried to avoid this originally but alas
this seems to be the easiest way out).  This fixes a bug in VLAN
where it continued to use the old return value 2 instead of the
correct GRO_DROP.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-16 10:50:02 -07:00
Pablo Neira Ayuso 0269ea4937 netfilter: xtables: add cluster match
This patch adds the iptables cluster match. This match can be used
to deploy gateway and back-end load-sharing clusters. The cluster
can be composed of 32 nodes maximum (although I have only tested
this with two nodes, so I cannot tell what is the real scalability
limit of this solution in terms of cluster nodes).

Assuming that all the nodes see all packets (see below for an
example on how to do that if your switch does not allow this), the
cluster match decides if this node has to handle a packet given:

	(jhash(source IP) % total_nodes) & node_mask

For related connections, the master conntrack is used. The following
is an example of its use to deploy a gateway cluster composed of two
nodes (where this is the node 1):

iptables -I PREROUTING -t mangle -i eth1 -m cluster \
	--cluster-total-nodes 2 --cluster-local-node 1 \
	--cluster-proc-name eth1 -j MARK --set-mark 0xffff
iptables -A PREROUTING -t mangle -i eth1 \
	-m mark ! --mark 0xffff -j DROP
iptables -A PREROUTING -t mangle -i eth2 -m cluster \
	--cluster-total-nodes 2 --cluster-local-node 1 \
	--cluster-proc-name eth2 -j MARK --set-mark 0xffff
iptables -A PREROUTING -t mangle -i eth2 \
	-m mark ! --mark 0xffff -j DROP

And the following commands to make all nodes see the same packets:

ip maddr add 01:00:5e:00:01:01 dev eth1
ip maddr add 01:00:5e:00:01:02 dev eth2
arptables -I OUTPUT -o eth1 --h-length 6 \
	-j mangle --mangle-mac-s 01:00:5e:00:01:01
arptables -I INPUT -i eth1 --h-length 6 \
	--destination-mac 01:00:5e:00:01:01 \
	-j mangle --mangle-mac-d 00:zz:yy:xx:5a:27
arptables -I OUTPUT -o eth2 --h-length 6 \
	-j mangle --mangle-mac-s 01:00:5e:00:01:02
arptables -I INPUT -i eth2 --h-length 6 \
	--destination-mac 01:00:5e:00:01:02 \
	-j mangle --mangle-mac-d 00:zz:yy:xx:5a:27

In the case of TCP connections, pickup facility has to be disabled
to avoid marking TCP ACK packets coming in the reply direction as
valid.

echo 0 > /proc/sys/net/netfilter/nf_conntrack_tcp_loose

BTW, some final notes:

 * This match mangles the skbuff pkt_type in case that it detects
PACKET_MULTICAST for a non-multicast address. This may be done in
a PKTTYPE target for this sole purpose.
 * This match supersedes the CLUSTERIP target.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-16 17:10:36 +01:00
Cyrill Gorcunov 1546000fe8 net: netfilter conntrack - add per-net functionality for DCCP protocol
Module specific data moved into per-net site and being allocated/freed
during net namespace creation/deletion.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Daniel Lezcano <daniel.lezcano@free.fr>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-16 16:30:49 +01:00
Cyrill Gorcunov 81a1d3c31e net: sysctl_net - use net_eq to compare nets
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Daniel Lezcano <daniel.lezcano@free.fr>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-16 16:23:30 +01:00
Linus Torvalds 8e91f178a2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits)
  r8169: revert "r8169: read MAC address from EEPROM on init (2nd attempt)"
  r8169: use hardware auto-padding.
  igb: remove ASPM L0s workaround
  netxen: remove old flash check.
  mv643xx_eth: fix unicast address filter corruption on mtu change
  xfrm: Fix xfrm_state_find() wrt. wildcard source address.
  emac: Fix clock control for 405EX and 405EXr chips
  ixgbe: fix multiple unicast address support
  via-velocity: Fix DMA mapping length errors on transmit.
  qlge: bugfix: Pad outbound frames smaller than 60 bytes.
  qlge: bugfix: Move netif_napi_del() to common call point.
  qlge: bugfix: Tell hw to strip vlan header.
  qlge: bugfix: Increase filter on inbound csum.
  dnet: replace obsolete *netif_rx_* functions with *napi_*
  net: Add be2net driver.
  dnet: Fix warnings on 64-bit.
  dnet: Dave DNET ethernet controller driver (updated)
  ipv6:  Fix BUG when disabled ipv6 module is unloaded
  bnx2x: Using DMAE to initialize the chip
  bnx2x: Casting page alignment
  ...
2009-03-16 07:56:58 -07:00
Christoph Paasch d1238d5337 netfilter: conntrack: check for NEXTHDR_NONE before header sanity checking
NEXTHDR_NONE doesn't has an IPv6 option header, so the first check
for the length will always fail and results in a confusing message
"too short" if debugging enabled. With this patch, we check for
NEXTHDR_NONE before length sanity checkings are done.

Signed-off-by: Christoph Paasch <christoph.paasch@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-16 15:52:11 +01:00
Christoph Paasch ec8d540969 netfilter: conntrack: fix dropping packet after l4proto->packet()
We currently use the negative value in the conntrack code to encode
the packet verdict in the error. As NF_DROP is equal to 0, inverting
NF_DROP makes no sense and, as a result, no packets are ever dropped.

Signed-off-by: Christoph Paasch <christoph.paasch@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-16 15:51:29 +01:00
Pablo Neira Ayuso 626ba8fbac netfilter: ctnetlink: fix crash during expectation creation
This patch fixes a possible crash due to the missing initialization
of the expectation class when nf_ct_expect_related() is called.

Reported-by: BORBELY Zoltan <bozo@andrews.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-16 15:50:51 +01:00
Jan Engelhardt acc738fec0 netfilter: xtables: avoid pointer to self
Commit 784544739a (netfilter: iptables:
lock free counters) broke a number of modules whose rule data referenced
itself. A reallocation would not reestablish the correct references, so
it is best to use a separate struct that does not fall under RCU.

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-16 15:35:29 +01:00
Jonathan Corbet 76398425bb Move FASYNC bit handling to f_op->fasync()
Removing the BKL from FASYNC handling ran into the challenge of keeping the
setting of the FASYNC bit in filp->f_flags atomic with regard to calls to
the underlying fasync() function.  Andi Kleen suggested moving the handling
of that bit into fasync(); this patch does exactly that.  As a result, we
have a couple of internal API changes: fasync() must now manage the FASYNC
bit, and it will be called without the BKL held.

As it happens, every fasync() implementation in the kernel with one
exception calls fasync_helper().  So, if we make fasync_helper() set the
FASYNC bit, we can avoid making any changes to the other fasync()
functions - as long as those functions, themselves, have proper locking.
Most fasync() implementations do nothing but call fasync_helper() - which
has its own lock - so they are easily verified as correct.  The BKL had
already been pushed down into the rest.

The networking code has its own version of fasync_helper(), so that code
has been augmented with explicit FASYNC bit handling.

Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: David Miller <davem@davemloft.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2009-03-16 08:32:27 -06:00
Scott James Remnant 95ba434f89 netfilter: auto-load ip_queue module when socket opened
The ip_queue module is missing the net-pf-16-proto-3 alias that would
causae it to be auto-loaded when a socket of that type is opened.  This
patch adds the alias.

Signed-off-by: Scott James Remnant <scott@canonical.com>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-16 15:31:10 +01:00
Scott James Remnant 26c3b67806 netfilter: auto-load ip6_queue module when socket opened
The ip6_queue module is missing the net-pf-16-proto-13 alias that would
cause it to be auto-loaded when a socket of that type is opened.  This
patch adds the alias.

Signed-off-by: Scott James Remnant <scott@canonical.com>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-16 15:30:14 +01:00
Pablo Neira Ayuso f0a3c0869f netfilter: ctnetlink: move event reporting for new entries outside the lock
This patch moves the event reporting outside the lock section. With
this patch, the creation and update of entries is homogeneous from
the event reporting perspective. Moreover, as the event reporting is
done outside the lock section, the netlink broadcast delivery can
benefit of the yield() call under congestion.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-16 15:28:09 +01:00
Pablo Neira Ayuso e098360f15 netfilter: ctnetlink: cleanup conntrack update preliminary checkings
This patch moves the preliminary checkings that must be fulfilled
to update a conntrack, which are the following:

 * NAT manglings cannot be updated
 * Changing the master conntrack is not allowed.

This patch is a cleanup.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-16 15:27:22 +01:00
Pablo Neira Ayuso 7ec4749675 netfilter: ctnetlink: cleanup master conntrack assignation
This patch moves the assignation of the master conntrack to
ctnetlink_create_conntrack(), which is where it really belongs.
This patch is a cleanup.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-16 15:25:46 +01:00
Pablo Neira Ayuso 1db7a748df netfilter: conntrack: increase drop stats if sequence adjustment fails
This patch increases the statistics of packets drop if the sequence
adjustment fails in ipv4_confirm().

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-16 15:18:50 +01:00
Stephen Hemminger 67c0d57930 netfilter: Kconfig spelling fixes (trivial)
Signed-off-by: Stephen Hemminger <sheminger@vyatta.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-16 15:17:23 +01:00
Christoph Paasch 9d2493f88f netfilter: remove IPvX specific parts from nf_conntrack_l4proto.h
Moving the structure definitions to the corresponding IPvX specific header files.

Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-16 15:15:35 +01:00
Eric Leblond c7a913cd55 netfilter: print the list of register loggers
This patch modifies the proc output to add display of registered
loggers. The content of /proc/net/netfilter/nf_log is modified. Instead
of displaying a protocol per line with format:
	proto:logger
it now displays:
	proto:logger (comma_separated_list_of_loggers)
NONE is used as keyword if no logger is used.

Signed-off-by: Eric Leblond <eric@inl.fr>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-16 14:55:27 +01:00
Eric Leblond ca735b3aaa netfilter: use a linked list of loggers
This patch modifies nf_log to use a linked list of loggers for each
protocol. This list of loggers is read and write protected with a
mutex.

This patch separates registration and binding. To be used as
logging module, a module has to register calling nf_log_register()
and to bind to a protocol it has to call nf_log_bind_pf().
This patch also converts the logging modules to the new API. For nfnetlink_log,
it simply switchs call to register functions to call to bind function and
adds a call to nf_log_register() during init. For other modules, it just
remove a const flag from the logger structure and replace it with a
__read_mostly.

Signed-off-by: Eric Leblond <eric@inl.fr>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-16 14:54:21 +01:00
Ilpo Järvinen afece1c658 tcp: make sure xmit goal size never becomes zero
It's not too likely to happen, would basically require crafted
packets (must hit the max guard in tcp_bound_to_half_wnd()).
It seems that nothing that bad would happen as there's tcp_mems
and congestion window that prevent runaway at some point from
hurting all too much (I'm not that sure what all those zero
sized segments we would generate do though in write queue).
Preventing it regardless is certainly the best way to go.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-15 20:09:55 -07:00
Ilpo Järvinen 2a3a041c4e tcp: cache result of earlier divides when mss-aligning things
The results is very unlikely change every so often so we
hardly need to divide again after doing that once for a
connection. Yet, if divide still becomes necessary we
detect that and do the right thing and again settle for
non-divide state. Takes the u16 space which was previously
taken by the plain xmit_size_goal.

This should take care part of the tso vs non-tso difference
we found earlier.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-15 20:09:55 -07:00
Ilpo Järvinen 0c54b85f28 tcp: simplify tcp_current_mss
There's very little need for most of the callsites to get
tp->xmit_goal_size updated. That will cost us divide as is,
so slice the function in two. Also, the only users of the
tp->xmit_goal_size are directly behind tcp_current_mss(),
so there's no need to store that variable into tcp_sock
at all! The drop of xmit_goal_size currently leaves 16-bit
hole and some reorganization would again be necessary to
change that (but I'm aiming to fill that hole with u16
xmit_goal_size_segs to cache the results of the remaining
divide to get that tso on regression).

Bring xmit_goal_size parts into tcp.c

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-15 20:09:54 -07:00
Ilpo Järvinen 72211e9050 tcp: don't check mtu probe completion in the loop
It seems that no variables clash such that we couldn't do
the check just once later on. Therefore move it.

Also kill dead obvious comment, dead argument and add
unlikely since this mtu probe does not happen too often.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-15 20:09:53 -07:00
Ilpo Järvinen c887e6d2d9 tcp: consolidate paws check
Wow, it was quite tricky to merge that stream of negations
but I think I finally got it right:

check & replace_ts_recent:
(s32)(rcv_tsval - ts_recent) >= 0                  => 0
(s32)(ts_recent - rcv_tsval) <= 0                  => 0

discard:
(s32)(ts_recent - rcv_tsval)  > TCP_PAWS_WINDOW    => 1
(s32)(ts_recent - rcv_tsval) <= TCP_PAWS_WINDOW    => 0

I toggled the return values of tcp_paws_check around since
the old encoding added yet-another negation making tracking
of truth-values really complicated.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-15 20:09:52 -07:00
Ilpo Järvinen c43d558a51 tcp: kill dead end_seq variable in clean_rtx_queue
I've already forgotten what for this was necessary, anyway
it's no longer used (if it ever was).

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-15 20:09:51 -07:00
Ilpo Järvinen 5861f8e58d tcp: remove pointless .dsack/.num_sacks code
In the pure assignment case, the earlier zeroing is
still in effect.

David S. Miller raised concerns if the ifs are there to avoid
dirtying cachelines. I came to these conclusions:

> We'll be dirty it anyway (now that I check), the first "real" statement
> in tcp_rcv_established is:
>
>       tp->rx_opt.saw_tstamp = 0;
>
> ...that'll land on the same dword. :-/
>
> I suppose the blocks are there just because they had more complexity
> inside when they had to calculate the eff_sacks too (maybe it would
> have been better to just remove them in that drop-patch so you would
> have had less head-ache :-)).

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-15 20:09:51 -07:00
Jarek Poplawski 7cd0a63872 pkt_sched: Change misleading code in class delete.
While looking for a possible reason of bugzilla report on HTB oops:
http://bugzilla.kernel.org/show_bug.cgi?id=12858
I found the code in htb_delete calling htb_destroy_class on zero
refcount is very misleading: it can suggest this is a common path, and
destroy is called under sch_tree_lock. Actually, this can never happen
like this because before deletion cops->get() is done, and after
delete a class is still used by tclass_notify. The class destroy is
always called from cops->put(), so without sch_tree_lock.

This doesn't mean much now (since 2.6.27) because all vulnerable calls
were moved from htb_destroy_class to htb_delete, but there was a bug
in older kernels. The same change is done for other classful scheds,
which, it seems, didn't have similar locking problems here.

Reported-by: m0sia <m0sia@m0sia.ru>
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-15 20:00:19 -07:00
Roel Kluin a2025b8b10 tcp: '< 0' test on unsigned
promote 'cnt' to size_t, to match 'len'.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13 16:05:14 -07:00
Roel Kluin 8db09f26f9 x25: '< 0' and '>= 0' test on unsigned
skb->len is an unsigned int, so the test in x25_rx_call_request() always
evaluates to true.

len in x25_sendmsg() is unsigned as well. so -ERRORS returned by x25_output()
are not noticed.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13 16:04:12 -07:00
Denys Fedoryshchenko 73ce7b01b4 ipv4: arp announce, arp_proxy and windows ip conflict verification
Windows (XP at least) hosts on boot, with configured static ip, performing 
address conflict detection, which is defined in RFC3927.
Here is quote of important information:

"
An ARP announcement is identical to the ARP Probe described above, 
except    that now the sender and target IP addresses are both set 
to the host's newly selected IPv4 address. 
"

But it same time this goes wrong with RFC5227.
"
The 'sender IP address' field MUST be set to all zeroes; this is to avoid
polluting ARP caches in other hosts on the same link in the case
where the address turns out to be already in use by another host.
"

When ARP proxy configured, it must not answer to both cases, because 
it is address conflict verification in any case. For Windows it is just 
causing to detect false "ip conflict". Already there is code for RFC5227, so 
just trivially we just check also if source ip == target ip.

Signed-off-by: Denys Fedoryshchenko <denys@visp.net.lb>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13 16:02:07 -07:00
David S. Miller 08ec9af1c0 xfrm: Fix xfrm_state_find() wrt. wildcard source address.
The change to make xfrm_state objects hash on source address
broke the case where such source addresses are wildcarded.

Fix this by doing a two phase lookup, first with fully specified
source address, next using saddr wildcarded.

Reported-by: Nicolas Dichtel <nicolas.dichtel@dev.6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13 14:22:40 -07:00
Yi Zou 1c8dbcf649 [SCSI] net: add NETIF_F_FCOE_CRC to can_checksum_protocol
Add FC CRC offload check for ETH_P_FCOE.

Signed-off-by: Yi Zou <yi.zou@intel.com>
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-13 15:11:38 -05:00
Neil Horman 273ae44b9c Network Drop Monitor: Adding Build changes to enable drop monitor
Network Drop Monitor: Adding Build changes to enable drop monitor

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>

 include/linux/Kbuild |    1 +
 net/Kconfig          |   11 +++++++++++
 net/core/Makefile    |    1 +
 3 files changed, 13 insertions(+)
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13 12:09:29 -07:00
Neil Horman 9a8afc8d39 Network Drop Monitor: Adding drop monitor implementation & Netlink protocol
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>

 include/linux/net_dropmon.h |   56 +++++++++
 net/core/drop_monitor.c     |  263 ++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 319 insertions(+)
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13 12:09:29 -07:00
Neil Horman ead2ceb0ec Network Drop Monitor: Adding kfree_skb_clean for non-drops and modifying end-of-line points for skbs
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>

 include/linux/skbuff.h |    4 +++-
 net/core/datagram.c    |    2 +-
 net/core/skbuff.c      |   22 ++++++++++++++++++++++
 net/ipv4/arp.c         |    2 +-
 net/ipv4/udp.c         |    2 +-
 net/packet/af_packet.c |    2 +-
 6 files changed, 29 insertions(+), 5 deletions(-)
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13 12:09:28 -07:00
Neil Horman 4893d39e86 Network Drop Monitor: Add trace declaration for skb frees
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>

 include/trace/skb.h   |    8 ++++++++
 net/core/Makefile     |    2 ++
 net/core/net-traces.c |   29 +++++++++++++++++++++++++++++
 3 files changed, 39 insertions(+)
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13 12:09:27 -07:00
malc 6fc791ee63 sctp: add Adaptation Layer Indication parameter only when it's set
RFC5061 states:

        Each adaptation layer that is defined that wishes
        to use this parameter MUST specify an adaptation code point in an
        appropriate RFC defining its use and meaning.

If the user has not set one - assume they don't want to sent the param
with a zero Adaptation Code Point.

Rationale - Currently the IANA defines zero as reserved - and
1 as the only valid value - so we consider zero to be unset - to save
adding a boolean to the socket structure.

Including this parameter unconditionally causes endpoints that do not
understand it to report errors unnecessarily.

Signed-off-by: Malcolm Lashley <mlashley@gmail.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13 11:37:58 -07:00
Wei Yongjun 76595024ff sctp: fix to send FORWARD-TSN chunk only if peer has such capable
RFC3758 Section 3.3.1.  Sending Forward-TSN-Supported param in INIT

   Note that if the endpoint chooses NOT to include the parameter, then
   at no time during the life of the association can it send or process
   a FORWARD TSN.

If peer does not support PR-SCTP capable, don't send FORWARD-TSN chunk
to peer.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13 11:37:58 -07:00
Wei Yongjun 5ffad5aceb sctp: fix to indicate ASCONF support in INIT-ACK only if peer has such capable
This patch fix to indicate ASCONF support in INIT-ACK only if peer has
such capable.

This patch also fix to calc the chunk size if peer has no FWD-TSN
capable.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13 11:37:56 -07:00
Vlad Yasevich 5e8f3f703a sctp: simplify sctp listening code
sctp_inet_listen() call is split between UDP and TCP style.  Looking
at the code, the two functions are almost the same and can be
merged into a single helper.  This also fixes a bug that was
fixed in the UDP function, but missed in the TCP function.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13 11:37:56 -07:00
Rusty Russell a70f730282 cpumask: replace node_to_cpumask with cpumask_of_node.
Impact: cleanup

node_to_cpumask (and the blecherous node_to_cpumask_ptr which
contained a declaration) are replaced now everyone implements
cpumask_of_node.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-13 14:49:46 +10:30
Trond Myklebust 5e3771ce2d SUNRPC: Ensure that xs_nospace return values are propagated
If xs_nospace() finds that the socket has disconnected, it attempts to
return ENOTCONN, however that value is then squashed by the callers.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-11 14:38:01 -04:00
Trond Myklebust 8a2cec295f SUNRPC: Delay, then retry on connection errors.
Enforce the comment in xs_tcp_connect_worker4/xs_tcp_connect_worker6 that
we should delay, then retry on certain connection errors.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-11 14:38:01 -04:00
Trond Myklebust 2a4919919a SUNRPC: Return EAGAIN instead of ENOTCONN when waking up xprt->pending
While we should definitely return socket errors to the task that is
currently trying to send data, there is no need to propagate the same error
to all the other tasks on xprt->pending. Doing so actually slows down
recovery, since it causes more than one tasks to attempt socket recovery.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-11 14:38:00 -04:00
Trond Myklebust 482f32e65d SUNRPC: Handle socket errors correctly
Ensure that we pick up and handle socket errors as they occur.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-11 14:38:00 -04:00
Trond Myklebust c8485e4d63 SUNRPC: Handle ECONNREFUSED correctly in xprt_transmit()
If we get an ECONNREFUSED error, we currently go to sleep on the
'xprt->sending' wait queue. The problem is that no timeout is set there,
and there is nothing else that will wake the task up later.

We should deal with ECONNREFUSED in call_status, given that is where we
also deal with -EHOSTDOWN, and friends.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-11 14:37:59 -04:00
Trond Myklebust 40d2549db5 SUNRPC: Don't disconnect if a connection is still in progress.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-11 14:37:58 -04:00
Trond Myklebust 670f945731 SUNRPC: Ensure we set XPRT_CLOSING only after we've sent a tcp FIN...
...so that we can distinguish between when we need to shutdown and when we
don't. Also remove the call to xs_tcp_shutdown() from xs_tcp_connect(),
since xprt_connect() makes the same test.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-11 14:37:58 -04:00
Trond Myklebust 15f081ca8d SUNRPC: Avoid an unnecessary task reschedule on ENOTCONN
If the socket is unconnected, and xprt_transmit() returns ENOTCONN, we
currently give up the lock on the transport channel. Doing so means that
the lock automatically gets assigned to the next task in the xprt->sending
queue, and so that task needs to be woken up to do the actual connect.

The following patch aims to avoid that unnecessary task switch.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-11 14:37:57 -04:00
Tom Talpey 441e3e2429 SUNRPC: dynamically load RPC transport modules on-demand
Provide an api to attempt to load any necessary kernel RPC
client transport module automatically. By convention, the
desired module name is "xprt"+"transport name". For example,
when NFS mounting with "-o proto=rdma", attempt to load the
"xprtrdma" module.

Signed-off-by: Tom Talpey <tmtalpey@gmail.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-11 14:37:56 -04:00
Tom Talpey b38ab40ad5 XPRTRDMA: correct an rpc/rdma inline send marshaling error
Certain client rpc's which contain both lengthy page-contained
metadata and a non-empty xdr_tail buffer require careful handling
to avoid overlapped memory copying. Rearranging of existing rpcrdma
marshaling code avoids it; this fixes an NFSv4 symlink creation error
detected with connectathon basic/test8 to multiple servers.

Signed-off-by: Tom Talpey <tmtalpey@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-11 14:37:55 -04:00
Tom Talpey b1e1e15877 SVCRDMA: remove faulty assertions in rpc/rdma chunk validation.
Certain client-provided RPCRDMA chunk alignments result in an
additional scatter/gather entry, which triggered nfs/rdma server
assertions incorrectly. OpenSolaris nfs/rdma client connectathon
testing was blocked by these in the special/locking section.

Signed-off-by: Tom Talpey <tmtalpey@gmail.com>
Cc: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-11 14:37:55 -04:00
Chuck Lever fe315e76fc SUNRPC: Avoid spurious wake-up during UDP connect processing
To clear out old state, the UDP connect workers unconditionally invoke
xs_close() before proceeding with a new connect.  Nowadays this causes
a spurious wake-up of the task waiting for the connect to complete.

This is a little racey, but usually harmless.  The waiting task
immediately retries the connect via a call_bind/call_connect sequence,
which usually finds the transport already in the connected state
because the connect worker has finished in the background.

To avoid a spurious wake-up, factor the xs_close() logic that resets
the underlying socket into a helper, and have the UDP connect workers
call that helper instead of xs_close().

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-11 14:10:21 -04:00
Trond Myklebust 01d37c428a SUNRPC: xprt_connect() don't abort the task if the transport isn't bound
If the transport isn't bound, then we should just return ENOTCONN, letting
call_connect_status() and/or call_status() deal with retrying. Currently,
we appear to abort all pending tasks with an EIO error.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-11 14:09:39 -04:00
Trond Myklebust fba91afbec SUNRPC: Fix an Oops due to socket not set up yet...
We can Oops in both xs_udp_send_request() and xs_tcp_send_request() if the
call to xs_sendpages() returns an error due to the socket not yet being
set up.
Deal with that situation by returning a new error: ENOTSOCK, so that we
know to avoid dereferencing transport->sock.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-11 14:06:41 -04:00
Eric Dumazet fc1ad92dfc tcp: allow timestamps even if SYN packet has tsval=0
Some systems send SYN packets with apparently wrong RFC1323 timestamp
option values [timestamp tsval=0 tsecr=0].
It might be for security reasons (http://www.secuobs.com/plugs/25220.shtml )

Linux TCP stack ignores this option and sends back a SYN+ACK packet
without timestamp option, thus many TCP flows cannot use timestamps
and lose some benefit of RFC1323.

Other operating systems seem to not care about initial tsval value, and let
tcp flows to negotiate timestamp option.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-11 09:23:57 -07:00
John Dykstra ff8cf9a938 ipv6: Fix BUG when disabled ipv6 module is unloaded
Do not try to "uninitialize" ipv6 if its initialization had been skipped
because module parameter disable=1 had been specified.

Reported-by:  Thomas Backlund <tmb@mandriva.org>
Signed-off-by: John Dykstra <john.dykstra1@gmail.com>
Acked-by: Brian Haley <brian.haley@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-11 09:22:51 -07:00
Ingo Molnar 78b020d035 Merge branches 'x86/cleanups', 'x86/kexec', 'x86/mce2' and 'linus' into x86/core 2009-03-11 10:49:15 +01:00