This patch changes mpage_readpages() and get_block() to get the disk mapping
information for multiple blocks at the same time.
b_size represents the amount of disk mapping that needs to mapped. On the
successful get_block() b_size indicates the amount of disk mapping thats
actually mapped. Only the filesystems who care to use this information and
provide multiple disk blocks at a time can choose to do so.
No changes are needed for the filesystems who wants to ignore this.
[akpm@osdl.org: cleanups]
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Pass amount of disk needs to be mapped to get_block(). This way one can
modify the fs ->get_block() functions to map multiple blocks at the same time.
[akpm@osdl.org: performance tweak]
[akpm@osdl.org: remove unneeded assignments]
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Increase the size of the buffer_head b_size field (only) for 64 bit platforms.
Update some old and moldy comments in and around the structure as well.
The b_size increase allows us to perform larger mappings and allocations for
large I/O requests from userspace, which tie in with other changes allowing
the get_block_t() interface to map multiple blocks at once.
Signed-off-by: Nathan Scott <nathans@sgi.com>
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Optimize the block reservation and the multiple block allocation: with the
knowledge of the total number of blocks ahead, set or adjust the reservation
window size properly (based on the number of blocks needed) before block
allocation happens: if there isn't any reservation yet, make sure the
reservation window equals to or greater than the number of blocks needed,
before create an reservation window; if a reservation window is already
exists, try to extends the window size to match the number of blocks to
allocate. This could increase the possibility of completing multiple blocks
allocation in a single request, as blocks are only allocated in the range of
the inode's reservation window.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Update accounting information (quota, boundary checks, free blocks number etc)
in ext3_new_blocks().
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Change ext3_try_to_allocate() (called via ext3_new_blocks()) to try to
allocate the requested number of blocks on a best effort basis: After
allocated the first block, it will always attempt to allocate the next few(up
to the requested size and not beyond the reservation window) adjacent blocks
at the same time.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add support for multiple block allocation in ext3-get-blocks().
Look up the disk block mapping and count the total number of blocks to
allocate, then pass it to ext3_new_block(), where the real block allocation is
performed. Once multiple blocks are allocated, prepare the branch with those
just allocated blocks info and finally splice the whole branch into the block
mapping tree.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Currently ext3_get_block() only maps or allocates one block at a time. This
is quite inefficient for sequential IO workload.
I have posted a early implements a simply multiple block map and allocation
with current ext3. The basic idea is allocating the 1st block in the existing
way, and attempting to allocate the next adjacent blocks on a best effort
basis. More description about the implementation could be found here:
http://marc.theaimsgroup.com/?l=ext2-devel&m=112162230003522&w=2
The following the latest version of the patch: break the original patch into 5
patches, re-worked some logicals, and fixed some bugs. The break ups are:
[patch 1] Adding map multiple blocks at a time in ext3_get_blocks()
[patch 2] Extend ext3_get_blocks() to support multiple block allocation
[patch 3] Implement multiple block allocation in ext3-try-to-allocate
(called via ext3_new_block()).
[patch 4] Proper accounting updates in ext3_new_blocks()
[patch 5] Adjust reservation window size properly (by the given number
of blocks to allocate) before block allocation to increase the
possibility of allocating multiple blocks in a single call.
Tests done so far includes fsx,tiobench and dbench. The following numbers
collected from Direct IO tests (1G file creation/read) shows the system time
have been greatly reduced (more than 50% on my 8 cpu system) with the patches.
1G file DIO write:
2.6.15 2.6.15+patches
real 0m31.275s 0m31.161s
user 0m0.000s 0m0.000s
sys 0m3.384s 0m0.564s
1G file DIO read:
2.6.15 2.6.15+patches
real 0m30.733s 0m30.624s
user 0m0.000s 0m0.004s
sys 0m0.748s 0m0.380s
Some previous test we did on buffered IO with using multiple blocks allocation
and delayed allocation shows noticeable improvement on throughput and system
time.
This patch:
Add support of mapping multiple blocks in one call.
This is useful for DIO reads and re-writes (where blocks are already
allocated), also is in line with Christoph's proposal of using getblocks() in
mpage_readpage() or mpage_readpages().
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This fix was proposed by Trond Myklebust. He says: The type "sector_t" is
heavily tied in to the block layer interface as an offset/handle to a block,
and is subject to a supposedly block-specific configuration option:
CONFIG_LBD. Despite this, it is used in struct kstatfs to save a couple of
bytes on the stack whenever we call the filesystems' ->statfs().
So kstatfs's entries related to blocks are invalid on statfs64 for a network
filesystem which has more than 2^32-1 blocks when CONFIG_LBD is disabled.
- struct kstatfs
Change the type of following entries from sector_t to u64.
f_blocks
f_bfree
f_bavail
f_files
f_ffree
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Takashi Sato <sho@tnes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add blkcnt_t as the type of inode.i_blocks. This enables you to make the size
of blkcnt_t either 4 bytes or 8 bytes on 32 bits architecture with CONFIG_LSF.
- CONFIG_LSF
Add new configuration parameter.
- blkcnt_t
On h8300, i386, mips, powerpc, s390 and sh that define sector_t,
blkcnt_t is defined as u64 if CONFIG_LSF is enabled; otherwise it is
defined as unsigned long.
On other architectures, it is defined as unsigned long.
- inode.i_blocks
Change the type from sector_t to blkcnt_t.
Signed-off-by: Takashi Sato <sho@tnes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch series fixes the following problems on 32 bits architecture.
o stat64 returns the lower 32 bits of blocks, although userland st_blocks
has 64 bits, because i_blocks has only 32 bits. The ioctl with FIOQSIZE has
the same problem.
o As Dave Kleikamp said, making >2TB file on JFS results in writing an
invalid block number to disk inode. The cause is the same as above too.
o In generic quota code dquot_transfer(), the file usage is calculated from
i_blocks via inode_get_bytes(). If the file is over 2TB, the change of
usage is less than expected. The cause is the same as above too.
o As Trond Myklebust said, statfs64's entries related to blocks are invalid
on statfs64 for a network filesystem which has more than 2^32-1 blocks with
CONFIG_LBD disabled. [PATCH 3/3]
We made patches to fix problems that occur when handling a large filesystem
and a large file. It was discussed on the mails titled "stat64 for over 2TB
file returned invalid st_blocks".
Signed-off-by: Takashi Sato <sho@tnes.nec.co.jp>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Jan Kara <jack@ucw.cz>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Modify well over a dozen mempool users to call mempool_create_slab_pool()
rather than calling mempool_create() with extra arguments, saving about 30
lines of code and increasing readability.
Signed-off-by: Matthew Dobson <colpatch@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Create a simple wrapper function for the common case of creating a slab-based
mempool.
Signed-off-by: Matthew Dobson <colpatch@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch changes a mempool user, which is basically just a wrapper around
kzalloc(), to use the common mempool_kmalloc/kfree, rather than its own
wrapper function, removing duplicated code.
Signed-off-by: Matthew Dobson <colpatch@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add another allocator to the common mempool code: a kzalloc/kfree allocator
This will be used by the next patch in the series to replace a mempool-backed
kzalloc allocator. It is also very likely that there will be more users in
the future.
Signed-off-by: Matthew Dobson <colpatch@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch changes several mempool users, all of which are basically just
wrappers around kmalloc(), to use the common mempool_kmalloc/kfree, rather
than their own wrapper function, removing a bunch of duplicated code.
Signed-off-by: Matthew Dobson <colpatch@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add another allocator to the common mempool code: a kmalloc/kfree allocator
This will be used by the next patch in the series to replace duplicate
mempool-backed kmalloc allocators in several places in the kernel. It is also
very likely that there will be more users in the future.
Signed-off-by: Matthew Dobson <colpatch@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Convert two mempool users that currently use their own mempool-backed page
allocators to use the generic mempool page allocator.
Also included are 2 trivial whitespace fixes.
Signed-off-by: Matthew Dobson <colpatch@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This will be used by the next patch in the series to replace duplicate
mempool-backed page allocators in 2 places in the kernel. It is also likely
that there will be more users in the future.
Signed-off-by: Matthew Dobson <colpatch@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Handle netif_carrier_{on,of} also if media is forced to 10baseT/100baseTx.
Signed-off-by: Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Set the polling interval for media changes to 5 seconds if link is down and
60 seconds if link is up.
Signed-off-by: Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Check for media changes and netif_carrier by using mii_check_media() if mii is
used.
Signed-off-by: Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
I noticed that after boot with an initrd in 2.6.16 the rootfs had:
--w-r-xr-T 1 root root 6241141 Jan 1 1970 initrd.image
Which is caused by a small typo:
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix compilation for sound/oss/vwsnd.o, by moving li_destroy() above
li_create()
sound/oss/vwsnd.c:275: warning: conflicting types for âli_destroyâ
sound/oss/vwsnd.c:275: error: static declaration of âli_destroyâ follows non-static declaration
sound/oss/vwsnd.c:264: error: previous implicit declaration of âli_destroyâ was here
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Zdenek Pavlas <pavlas@nextra.cz>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The isicom driver uses request_firmware() and thus needs to select
FW_LOADER.
Signed-off-by: maximilian attems <maks@sternwelten.at>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Coverity found an over-run @ line 364 of efi.c
This is due to the loop checking the size correctly, then adding a '\0'
after possibly hitting the end of the array.
Ensure the loop exits with one space left in the array.
Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
drivers/input/touchscreen/ads7846.c: In function `ads7846_read12_ser':
drivers/input/touchscreen/ads7846.c:207: warning: implicit declaration of function `disable_irq'
drivers/input/touchscreen/ads7846.c:209: warning: implicit declaration of function `enable_irq'
Cc: Dmitry Torokhov <dtor_core@ameritech.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Since the addition of boot_cpu_init(), fixup_cpu_present_map() has been a
no-op. That's because fixup_cpu_present_map() won't touch cpu_present_map if
it has any bits set, and boot_cpu_init() sets a bit.
So remove fixup_cpu_present_map().
A consequence of this (actually of the boot_cpu_init() change) is that the
architecture _must_ populate cpu_present_map itself (probably in
smp_prepare_cpus()). fixup_cpu_present_map() won't do it any more.
If the architecture doesn't do this, it'll only bring up a single CPU.
The other side effect (though less serious) is that smp_prepare_boot_cpu() no
longer needs to mark the boot cpu in the online and present maps -
boot_cpu_init() does that for everyone (to make early printks work).
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
tlclk calls register_chrdev() and permits register_chrdev() to allocate the
major, but it promptly forgets what that major was. So if there's no hardware
present you still get "telco_clock" appearing in /proc/devices and, I assume,
an oops reading /proc/devices if tlclk was a module.
Fix.
Mark, I'd suggest that that we not call register_chrdev() until _after_ we've
established that the hardware is present.
Cc: Mark Gross <mgross@linux.intel.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Check that kernel_thread() succeeded, so we don't wait for something which
cannot happen.
Signed-off-by: Herbert Poetzl <herbert@13thfloor.at>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Change proc_dir_entry->size to be loff_t to represent files like
/proc/vmcore for 32bit systems with more than 4G memory.
Needed for seeing correct size for /proc/vmcore for 32-bit systems with >
4G RAM.
Signed-off-by: Maneesh Soni <maneesh@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Create compat_sys_adjtimex and use it an all appropriate places.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We had a copy of the compatibility version of struct timex in each 64 bit
architecture. This patch just creates a global one and replaces all the
usages of the old ones.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kyle McMartin <kyle@parisc-linux.org>
Acked-by: Tony Luck <tony.luck@intel.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Update the NFSv4 server to use the new posix_lock_file_conf() interface.
Remove unnecessary (and race-prone) posix_test_file() calls.
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Lockd and the NFSv4 server both exercise a race condition where
posix_test_lock() is called either before or after posix_lock_file() to
deal with a denied lock request due to a conflicting lock.
Remove the race condition for the NFSv4 server by adding a new conflicting
lock parameter to __posix_lock_file() , changing the name to
__posix_lock_file_conf().
Keep posix_lock_file() interface, add posix_lock_conf() interface, both
call __posix_lock_file_conf().
[akpm@osdl.org: Put the EXPORT_SYMBOL() where it belongs]
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
BUG instead of handling a case that should never happen.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
I discovered on oprofile hunting on a SMP platform that dentry lookups were
slowed down because d_hash_mask, d_hash_shift and dentry_hashtable were in
a cache line that contained inodes_stat. So each time inodes_stats is
changed by a cpu, other cpus have to refill their cache line.
This patch moves some variables to the __read_mostly section, in order to
avoid false sharing. RCU dentry lookups can go full speed.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add __KERNEL__ block.
Use __KERNEL__ to allow ioctl interface to be usable.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Need to increment the version number because of the new PCI and sysfs
capabilities of the driver. People maintaining things for distros have
asked that I do this after interface or major functional changes.
Signed-off-by: Corey Minyard <minyard@acm.org>
Acked-by: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add full driver model support for the IPMI driver. It links in the proper
bus and device support.
It adds an "ipmi" driver interface that has each BMC discovered by the
driver (as a device). These BMCs appear in the devices/platform directory.
If there are multiple interfaces to the same BMC, the driver should
discover this and will only have one BMC entry. The BMC entry will have
pointers to each interface device that connects to it.
The device information (statistics and config information) has not yet been
ported over to the driver model from proc, that will come later.
This work was based on work by Yani Ioannou. I basically rewrote it using
that code as a guide, but he still deserves credit :).
[bunk@stusta.de: make ipmi_find_bmc_guid() static]
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Modify the PCI hanling code for the IPMI driver to use the new method of
tables and registering, and adds more generic PCI handling for IPMI.
Unfortunately, this required a rather large rework of the way the driver
did detection so it would be more event-driven.
[bunk@stusta.de: make a struct static]
Signed-off-by: Corey Minyard <minyard@acm.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
net/core/flow.c: In function 'flow_cache_flush':
net/core/flow.c:299: warning: statement with no effect
Signed-off-by: Con Kolivas <kernel@kolivas.org>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The return value of this function is never used, so let's be honest and
declare it as void.
Some places where invalidatepage returned 0, I have inserted comments
suggesting a BUG_ON.
[akpm@osdl.org: JBD BUG fix]
[akpm@osdl.org: rework for git-nfs]
[akpm@osdl.org: don't go BUG in block_invalidate_page()]
Signed-off-by: Neil Brown <neilb@suse.de>
Acked-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The only user ignores the return value, and the only instanace
(block_sync_page) always returns 0...
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Badari Pulavarty
Mingming Cao
Takashi Sato
Andrew Morton
Matthew Dobson
Steffen Klassert
Jason Gunthorpe
Eric Sesterhenn
H. Peter Anvin
maximilian attems
Darren Jenkins
Herbert Poetzl
Maneesh Soni
Stephen Rothwell
Andy Adamson
J. Bruce Fields
Eric Dumazet
Randy Dunlap
Corey Minyard
Con Kolivas
NeilBrown