Граф коммитов

311 Коммитов

Автор SHA1 Сообщение Дата
Dmitry Kasatkin 3dcbad52cf evm: properly handle INTEGRITY_NOXATTRS EVM status
Unless an LSM labels a file during d_instantiate(), newly created
files are not labeled with an initial security.evm xattr, until
the file closes.  EVM, before allowing a protected, security xattr
to be written, verifies the existing 'security.evm' value is good.
For newly created files without a security.evm label, this
verification prevents writing any protected, security xattrs,
until the file closes.

Following is the example when this happens:
fd = open("foo", O_CREAT | O_WRONLY, 0644);
setxattr("foo", "security.SMACK64", value, sizeof(value), 0);
close(fd);

While INTEGRITY_NOXATTRS status is handled in other places, such
as evm_inode_setattr(), it does not handle it in all cases in
evm_protect_xattr().  By limiting the use of INTEGRITY_NOXATTRS to
newly created files, we can now allow setting "protected" xattrs.

Changelog:
- limit the use of INTEGRITY_NOXATTRS to IMA identified new files

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>  3.14+
2014-09-09 10:26:10 -04:00
Dmitry Kasatkin b151d6b00b ima: provide flag to identify new empty files
On ima_file_free(), newly created empty files are not labeled with
an initial security.ima value, because the iversion did not change.
Commit dff6efc "fs: fix iversion handling" introduced a change in
iversion behavior.  To verify this change use the shell command:

  $ (exec >foo)
  $ getfattr -h -e hex -d -m security foo

This patch defines the IMA_NEW_FILE flag.  The flag is initially
set, when IMA detects that a new file is created, and subsequently
checked on the ima_file_free() hook to set the initial security.ima
value.

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>  3.14+
2014-09-08 17:38:57 -04:00
Dmitry Kasatkin 1f1009791b evm: prevent passing integrity check if xattr read fails
This patch fixes a bug, where evm_verify_hmac() returns INTEGRITY_PASS
if inode->i_op->getxattr() returns an error in evm_find_protected_xattrs.

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
2014-09-08 17:36:10 -04:00
Dmitry Kasatkin e7d021e283 evm: fix checkpatch warnings
This patch fixes checkpatch 'return' warnings introduced with commit
9819cf2 "checkpatch: warn on unnecessary void function return statements".

Use scripts/checkpatch.pl --file security/integrity/evm/evm_main.c
to produce the warnings.

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-09-02 17:03:37 -04:00
Dmitry Kasatkin 27cd1fc3ae ima: fix fallback to use new_sync_read()
3.16 commit aad4f8bb42
'switch simple generic_file_aio_read() users to ->read_iter()'
replaced ->aio_read with ->read_iter in most of the file systems
and introduced new_sync_read() as a replacement for do_sync_read().

Most of file systems set '->read' and ima_kernel_read is not affected.
When ->read is not set, this patch adopts fallback call changes from the
vfs_read.

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>  3.16+
2014-09-02 17:03:36 -04:00
Dmitry Kasatkin 23c19e2ca7 ima: prevent buffer overflow in ima_alloc_tfm()
This patch fixes the case where the file's signature/hash xattr contains
an invalid hash algorithm.  Although we can not verify the xattr, we still
need to measure the file.  Use the default IMA hash algorithm.

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-09-02 17:03:36 -04:00
Mimi Zohar 9a8d289fbc ima: fix ima_alloc_atfm()
The patch 3bcced39ea7d: "ima: use ahash API for file hash
calculation" from Feb 26, 2014, leads to the following static checker
warning:

security/integrity/ima/ima_crypto.c:204 ima_alloc_atfm()
         error: buffer overflow 'hash_algo_name' 17 <= 17

Unlike shash tfm memory, which is allocated on initialization, the
ahash tfm memory allocation is deferred until needed.

This patch fixes the case where ima_ahash_tfm has not yet been
allocated and the file's signature/hash xattr contains an invalid hash
algorithm.  Although we can not verify the xattr, we still need to
measure the file.  Use the default IMA hash algorithm.

Changelog:
- set valid algo before testing tfm - based on Dmitry's comment

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
2014-09-02 17:03:35 -04:00
Mimi Zohar 5a9196d715 ima: add support for measuring and appraising firmware
The "security: introduce kernel_fw_from_file hook" patch defined a
new security hook to evaluate any loaded firmware that wasn't built
into the kernel.

This patch defines ima_fw_from_file(), which is called from the new
security hook, to measure and/or appraise the loaded firmware's
integrity.

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
2014-07-25 11:47:46 -07:00
Mimi Zohar 7d2ce2320e ima: define '.ima' as a builtin 'trusted' keyring
Require all keys added to the IMA keyring be signed by an
existing trusted key on the system trusted keyring.

Changelog v6:
- remove ifdef CONFIG_IMA_TRUSTED_KEYRING in C code - Dmitry
- update Kconfig dependency and help
- select KEYS_DEBUG_PROC_KEYS - Dmitry

Changelog v5:
- Move integrity_init_keyring() to init_ima() - Dmitry
- reset keyring[id] on failure - Dmitry

Changelog v1:
- don't link IMA trusted keyring to user keyring

Changelog:
- define stub integrity_init_keyring() function (reported-by Fengguang Wu)
- differentiate between regular and trusted keyring names.
- replace printk with pr_info (D. Kasatkin)
- only make the IMA keyring a trusted keyring (reported-by D. Kastatkin)
- define stub integrity_init_keyring() definition based on
  CONFIG_INTEGRITY_SIGNATURE, not CONFIG_INTEGRITY_ASYMMETRIC_KEYS.
  (reported-by Jim Davis)

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Acked-by: David Howells <dhowells@redhat.com>
2014-07-17 09:35:17 -04:00
Dmitry Kasatkin 32c2e6752f ima: provide double buffering for hash calculation
The asynchronous hash API allows initiating a hash calculation and
then performing other tasks, while waiting for the hash calculation
to complete.

This patch introduces usage of double buffering for simultaneous
hashing and reading of the next chunk of data from storage.

Changes in v3:
- better comments

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-07-17 09:35:11 -04:00
Dmitry Kasatkin 6edf7a8926 ima: introduce multi-page collect buffers
Use of multiple-page collect buffers reduces:
1) the number of block IO requests
2) the number of asynchronous hash update requests

Second is important for HW accelerated hashing, because significant
amount of time is spent for preparation of hash update operation,
which includes configuring acceleration HW, DMA engine, etc...
Thus, HW accelerators are more efficient when working on large
chunks of data.

This patch introduces usage of multi-page collect buffers. Buffer size
can be specified using 'ahash_bufsize' module parameter. Default buffer
size is 4096 bytes.

Changes in v3:
- kernel parameter replaced with module parameter

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-07-17 09:35:11 -04:00
Dmitry Kasatkin 3bcced39ea ima: use ahash API for file hash calculation
Async hash API allows the use of HW acceleration for hash calculation.
It may give significant performance gain and/or reduce power consumption,
which might be very beneficial for battery powered devices.

This patch introduces hash calculation using ahash API. ahash performance
depends on the data size and the particular HW. Depending on the specific
system, shash performance may be better.

This patch defines 'ahash_minsize' module parameter, which is used to
define the minimal file size to use with ahash.  If this minimum file size
is not set or the file is smaller than defined by the parameter, shash will
be used.

Changes in v3:
- kernel parameter replaced with module parameter
- pr_crit replaced with pr_crit_ratelimited
- more comment changes - Mimi

Changes in v2:
- ima_ahash_size became as ima_ahash
- ahash pre-allocation moved out from __init code to be able to use
  ahash crypto modules. Ahash allocated once on the first use.
- hash calculation falls back to shash if ahash allocation/calculation fails
- complex initialization separated from variable declaration
- improved comments

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-07-17 09:35:10 -04:00
Richard Guy Briggs 7e9001f663 audit: fix dangling keywords in integrity ima message output
Replace spaces in op keyword labels in log output since userspace audit tools
can't parse orphaned keywords.

Reported-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-07-17 09:35:10 -04:00
Dmitry Kasatkin 209b43ca64 ima: delay template descriptor lookup until use
process_measurement() always calls ima_template_desc_current(),
including when an IMA policy has not been defined.

This patch delays template descriptor lookup until action is
determined.

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-07-17 09:35:09 -04:00
Dmitry Kasatkin 2c50b96482 ima: remove unnecessary i_mutex locking from ima_rdwr_violation_check()
Before 2.6.39 inode->i_readcount was maintained by IMA. It was not atomic
and protected using spinlock. For 2.6.39, i_readcount was converted to
atomic and maintaining was moved VFS layer. Spinlock for some unclear
reason was replaced by i_mutex.

After analyzing the code, we came to conclusion that i_mutex locking is
unnecessary, especially when an IMA policy has not been defined.

This patch removes i_mutex locking from ima_rdwr_violation_check().

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-07-17 09:35:09 -04:00
Dmitry Kasatkin 0430e49b6e ima: introduce ima_kernel_read()
Commit 8aac62706 "move exit_task_namespaces() outside of exit_notify"
introduced the kernel opps since the kernel v3.10, which happens when
Apparmor and IMA-appraisal are enabled at the same time.

----------------------------------------------------------------------
[  106.750167] BUG: unable to handle kernel NULL pointer dereference at
0000000000000018
[  106.750221] IP: [<ffffffff811ec7da>] our_mnt+0x1a/0x30
[  106.750241] PGD 0
[  106.750254] Oops: 0000 [#1] SMP
[  106.750272] Modules linked in: cuse parport_pc ppdev bnep rfcomm
bluetooth rpcsec_gss_krb5 nfsd auth_rpcgss nfs_acl nfs lockd sunrpc
fscache dm_crypt intel_rapl x86_pkg_temp_thermal intel_powerclamp
kvm_intel snd_hda_codec_hdmi kvm crct10dif_pclmul crc32_pclmul
ghash_clmulni_intel aesni_intel aes_x86_64 glue_helper lrw gf128mul
ablk_helper cryptd snd_hda_codec_realtek dcdbas snd_hda_intel
snd_hda_codec snd_hwdep snd_pcm snd_page_alloc snd_seq_midi
snd_seq_midi_event snd_rawmidi psmouse snd_seq microcode serio_raw
snd_timer snd_seq_device snd soundcore video lpc_ich coretemp mac_hid lp
parport mei_me mei nbd hid_generic e1000e usbhid ahci ptp hid libahci
pps_core
[  106.750658] CPU: 6 PID: 1394 Comm: mysqld Not tainted 3.13.0-rc7-kds+ #15
[  106.750673] Hardware name: Dell Inc. OptiPlex 9010/0M9KCM, BIOS A08
09/19/2012
[  106.750689] task: ffff8800de804920 ti: ffff880400fca000 task.ti:
ffff880400fca000
[  106.750704] RIP: 0010:[<ffffffff811ec7da>]  [<ffffffff811ec7da>]
our_mnt+0x1a/0x30
[  106.750725] RSP: 0018:ffff880400fcba60  EFLAGS: 00010286
[  106.750738] RAX: 0000000000000000 RBX: 0000000000000100 RCX:
ffff8800d51523e7
[  106.750764] RDX: ffffffffffffffea RSI: ffff880400fcba34 RDI:
ffff880402d20020
[  106.750791] RBP: ffff880400fcbae0 R08: 0000000000000000 R09:
0000000000000001
[  106.750817] R10: 0000000000000000 R11: 0000000000000001 R12:
ffff8800d5152300
[  106.750844] R13: ffff8803eb8df510 R14: ffff880400fcbb28 R15:
ffff8800d51523e7
[  106.750871] FS:  0000000000000000(0000) GS:ffff88040d200000(0000)
knlGS:0000000000000000
[  106.750910] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  106.750935] CR2: 0000000000000018 CR3: 0000000001c0e000 CR4:
00000000001407e0
[  106.750962] Stack:
[  106.750981]  ffffffff813434eb ffff880400fcbb20 ffff880400fcbb18
0000000000000000
[  106.751037]  ffff8800de804920 ffffffff8101b9b9 0001800000000000
0000000000000100
[  106.751093]  0000010000000000 0000000000000002 000000000000000e
ffff8803eb8df500
[  106.751149] Call Trace:
[  106.751172]  [<ffffffff813434eb>] ? aa_path_name+0x2ab/0x430
[  106.751199]  [<ffffffff8101b9b9>] ? sched_clock+0x9/0x10
[  106.751225]  [<ffffffff8134a68d>] aa_path_perm+0x7d/0x170
[  106.751250]  [<ffffffff8101b945>] ? native_sched_clock+0x15/0x80
[  106.751276]  [<ffffffff8134aa73>] aa_file_perm+0x33/0x40
[  106.751301]  [<ffffffff81348c5e>] common_file_perm+0x8e/0xb0
[  106.751327]  [<ffffffff81348d78>] apparmor_file_permission+0x18/0x20
[  106.751355]  [<ffffffff8130c853>] security_file_permission+0x23/0xa0
[  106.751382]  [<ffffffff811c77a2>] rw_verify_area+0x52/0xe0
[  106.751407]  [<ffffffff811c789d>] vfs_read+0x6d/0x170
[  106.751432]  [<ffffffff811cda31>] kernel_read+0x41/0x60
[  106.751457]  [<ffffffff8134fd45>] ima_calc_file_hash+0x225/0x280
[  106.751483]  [<ffffffff8134fb52>] ? ima_calc_file_hash+0x32/0x280
[  106.751509]  [<ffffffff8135022d>] ima_collect_measurement+0x9d/0x160
[  106.751536]  [<ffffffff810b552d>] ? trace_hardirqs_on+0xd/0x10
[  106.751562]  [<ffffffff8134f07c>] ? ima_file_free+0x6c/0xd0
[  106.751587]  [<ffffffff81352824>] ima_update_xattr+0x34/0x60
[  106.751612]  [<ffffffff8134f0d0>] ima_file_free+0xc0/0xd0
[  106.751637]  [<ffffffff811c9635>] __fput+0xd5/0x300
[  106.751662]  [<ffffffff811c98ae>] ____fput+0xe/0x10
[  106.751687]  [<ffffffff81086774>] task_work_run+0xc4/0xe0
[  106.751712]  [<ffffffff81066fad>] do_exit+0x2bd/0xa90
[  106.751738]  [<ffffffff8173c958>] ? retint_swapgs+0x13/0x1b
[  106.751763]  [<ffffffff8106780c>] do_group_exit+0x4c/0xc0
[  106.751788]  [<ffffffff81067894>] SyS_exit_group+0x14/0x20
[  106.751814]  [<ffffffff8174522d>] system_call_fastpath+0x1a/0x1f
[  106.751839] Code: c3 0f 1f 44 00 00 55 48 89 e5 e8 22 fe ff ff 5d c3
0f 1f 44 00 00 55 65 48 8b 04 25 c0 c9 00 00 48 8b 80 28 06 00 00 48 89
e5 5d <48> 8b 40 18 48 39 87 c0 00 00 00 0f 94 c0 c3 0f 1f 80 00 00 00
[  106.752185] RIP  [<ffffffff811ec7da>] our_mnt+0x1a/0x30
[  106.752214]  RSP <ffff880400fcba60>
[  106.752236] CR2: 0000000000000018
[  106.752258] ---[ end trace 3c520748b4732721 ]---
----------------------------------------------------------------------

The reason for the oops is that IMA-appraisal uses "kernel_read()" when
file is closed. kernel_read() honors LSM security hook which calls
Apparmor handler, which uses current->nsproxy->mnt_ns. The 'guilty'
commit changed the order of cleanup code so that nsproxy->mnt_ns was
not already available for Apparmor.

Discussion about the issue with Al Viro and Eric W. Biederman suggested
that kernel_read() is too high-level for IMA. Another issue, except
security checking, that was identified is mandatory locking. kernel_read
honors it as well and it might prevent IMA from calculating necessary hash.
It was suggested to use simplified version of the function without security
and locking checks.

This patch introduces special version ima_kernel_read(), which skips security
and mandatory locking checking. It prevents the kernel oops to happen.

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Suggested-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>
2014-06-12 17:58:08 -04:00
Mimi Zohar 2fb1c9a4f2 evm: prohibit userspace writing 'security.evm' HMAC value
Calculating the 'security.evm' HMAC value requires access to the
EVM encrypted key.  Only the kernel should have access to it.  This
patch prevents userspace tools(eg. setfattr, cp --preserve=xattr)
from setting/modifying the 'security.evm' HMAC value directly.

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>
2014-06-12 17:58:07 -04:00
Dmitry Kasatkin 14503eb994 ima: check inode integrity cache in violation check
When IMA did not support ima-appraisal, existance of the S_IMA flag
clearly indicated that the file was measured. With IMA appraisal S_IMA
flag indicates that file was measured and/or appraised. Because of
this, when measurement is not enabled by the policy, violations are
still reported.

To differentiate between measurement and appraisal policies this
patch checks the inode integrity cache flags.  The IMA_MEASURED
flag indicates whether the file was actually measured, while the
IMA_MEASURE flag indicates whether the file should be measured.
Unfortunately, the IMA_MEASURED flag is reset to indicate the file
needs to be re-measured.  Thus, this patch checks the IMA_MEASURE
flag.

This patch limits the false positive violation reports, but does
not fix it entirely.  The IMA_MEASURE/IMA_MEASURED flags are
indications that, at some point in time, the file opened for read
was in policy, but might not be in policy now (eg. different uid).
Other changes would be needed to further limit false positive
violation reports.

Changelog:
- expanded patch description based on conversation with Roberto (Mimi)

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-06-12 17:58:07 -04:00
Dmitry Kasatkin b882fae2d3 ima: prevent unnecessary policy checking
ima_rdwr_violation_check is called for every file openning.
The function checks the policy even when violation condition
is not met. It causes unnecessary policy checking.

This patch does policy checking only if violation condition is met.

Changelog:
- check writecount is greater than zero (Mimi)

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-06-12 17:58:06 -04:00
Dmitry Kasatkin 3e38df56e6 evm: provide option to protect additional SMACK xattrs
Newer versions of SMACK introduced following security xattrs:
SMACK64EXEC, SMACK64TRANSMUTE and SMACK64MMAP.

To protect these xattrs, this patch includes them in the HMAC
calculation.  However, for backwards compatibility with existing
labeled filesystems, including these xattrs needs to be
configurable.

Changelog:
- Add SMACK dependency on new option (Mimi)

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-06-12 17:58:06 -04:00
Dmitry Kasatkin d3b3367948 evm: replace HMAC version with attribute mask
Using HMAC version limits the posibility to arbitrarily add new
attributes such as SMACK64EXEC to the hmac calculation.

This patch replaces hmac version with attribute mask.
Desired attributes can be enabled with configuration parameter.
It allows to build kernels which works with previously labeled
filesystems.

Currently supported attribute is 'fsuuid' which is equivalent of
the former version 2.

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-06-12 17:58:06 -04:00
Mimi Zohar 060bdebfb0 ima: prevent new digsig xattr from being replaced
Even though a new xattr will only be appraised on the next access,
set the DIGSIG flag to prevent a signature from being replaced with
a hash on file close.

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-06-12 17:58:05 -04:00
Linus Torvalds fad0701eaa Merge branch 'serge-next-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux-security
Pull security layer updates from Serge Hallyn:
 "This is a merge of James Morris' security-next tree from 3.14 to
  yesterday's master, plus four patches from Paul Moore which are in
  linux-next, plus one patch from Mimi"

* 'serge-next-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux-security:
  ima: audit log files opened with O_DIRECT flag
  selinux: conditionally reschedule in hashtab_insert while loading selinux policy
  selinux: conditionally reschedule in mls_convert_context while loading selinux policy
  selinux: reject setexeccon() on MNT_NOSUID applications with -EACCES
  selinux:  Report permissive mode in avc: denied messages.
  Warning in scanf string typing
  Smack: Label cgroup files for systemd
  Smack: Verify read access on file open - v3
  security: Convert use of typedef ctl_table to struct ctl_table
  Smack: bidirectional UDS connect check
  Smack: Correctly remove SMACK64TRANSMUTE attribute
  SMACK: Fix handling value==NULL in post setxattr
  bugfix patch for SMACK
  Smack: adds smackfs/ptrace interface
  Smack: unify all ptrace accesses in the smack
  Smack: fix the subject/object order in smack_ptrace_traceme()
  Minor improvement of 'smack_sb_kern_mount'
  smack: fix key permission verification
  KEYS: Move the flags representing required permission to linux/key.h
2014-06-10 10:05:36 -07:00
Mimi Zohar f9b2a735bd ima: audit log files opened with O_DIRECT flag
Files are measured or appraised based on the IMA policy.  When a
file, in policy, is opened with the O_DIRECT flag, a deadlock
occurs.

The first attempt at resolving this lockdep temporarily removed the
O_DIRECT flag and restored it, after calculating the hash.  The
second attempt introduced the O_DIRECT_HAVELOCK flag. Based on this
flag, do_blockdev_direct_IO() would skip taking the i_mutex a second
time.  The third attempt, by Dmitry Kasatkin, resolves the i_mutex
locking issue, by re-introducing the IMA mutex, but uncovered
another problem.  Reading a file with O_DIRECT flag set, writes
directly to userspace pages.  A second patch allocates a user-space
like memory.  This works for all IMA hooks, except ima_file_free(),
which is called on __fput() to recalculate the file hash.

Until this last issue is addressed, do not 'collect' the
measurement for measuring, appraising, or auditing files opened
with the O_DIRECT flag set.  Based on policy, permit or deny file
access.  This patch defines a new IMA policy rule option named
'permit_directio'.  Policy rules could be defined, based on LSM
or other criteria, to permit specific applications to open files
with the O_DIRECT flag set.

Changelog v1:
- permit or deny file access based IMA policy rules

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Cc: <stable@vger.kernel.org>
2014-06-03 14:21:50 -05:00
Linus Torvalds 5166701b36 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
 "The first vfs pile, with deep apologies for being very late in this
  window.

  Assorted cleanups and fixes, plus a large preparatory part of iov_iter
  work.  There's a lot more of that, but it'll probably go into the next
  merge window - it *does* shape up nicely, removes a lot of
  boilerplate, gets rid of locking inconsistencie between aio_write and
  splice_write and I hope to get Kent's direct-io rewrite merged into
  the same queue, but some of the stuff after this point is having
  (mostly trivial) conflicts with the things already merged into
  mainline and with some I want more testing.

  This one passes LTP and xfstests without regressions, in addition to
  usual beating.  BTW, readahead02 in ltp syscalls testsuite has started
  giving failures since "mm/readahead.c: fix readahead failure for
  memoryless NUMA nodes and limit readahead pages" - might be a false
  positive, might be a real regression..."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
  missing bits of "splice: fix racy pipe->buffers uses"
  cifs: fix the race in cifs_writev()
  ceph_sync_{,direct_}write: fix an oops on ceph_osdc_new_request() failure
  kill generic_file_buffered_write()
  ocfs2_file_aio_write(): switch to generic_perform_write()
  ceph_aio_write(): switch to generic_perform_write()
  xfs_file_buffered_aio_write(): switch to generic_perform_write()
  export generic_perform_write(), start getting rid of generic_file_buffer_write()
  generic_file_direct_write(): get rid of ppos argument
  btrfs_file_aio_write(): get rid of ppos
  kill the 5th argument of generic_file_buffered_write()
  kill the 4th argument of __generic_file_aio_write()
  lustre: don't open-code kernel_recvmsg()
  ocfs2: don't open-code kernel_recvmsg()
  drbd: don't open-code kernel_recvmsg()
  constify blk_rq_map_user_iov() and friends
  lustre: switch to kernel_sendmsg()
  ocfs2: don't open-code kernel_sendmsg()
  take iov_iter stuff to mm/iov_iter.c
  process_vm_access: tidy up a bit
  ...
2014-04-12 14:49:50 -07:00
Linus Torvalds 0b747172dc Merge git://git.infradead.org/users/eparis/audit
Pull audit updates from Eric Paris.

* git://git.infradead.org/users/eparis/audit: (28 commits)
  AUDIT: make audit_is_compat depend on CONFIG_AUDIT_COMPAT_GENERIC
  audit: renumber AUDIT_FEATURE_CHANGE into the 1300 range
  audit: do not cast audit_rule_data pointers pointlesly
  AUDIT: Allow login in non-init namespaces
  audit: define audit_is_compat in kernel internal header
  kernel: Use RCU_INIT_POINTER(x, NULL) in audit.c
  sched: declare pid_alive as inline
  audit: use uapi/linux/audit.h for AUDIT_ARCH declarations
  syscall_get_arch: remove useless function arguments
  audit: remove stray newline from audit_log_execve_info() audit_panic() call
  audit: remove stray newlines from audit_log_lost messages
  audit: include subject in login records
  audit: remove superfluous new- prefix in AUDIT_LOGIN messages
  audit: allow user processes to log from another PID namespace
  audit: anchor all pid references in the initial pid namespace
  audit: convert PPIDs to the inital PID namespace.
  pid: get pid_t ppid of task in init_pid_ns
  audit: rename the misleading audit_get_context() to audit_take_context()
  audit: Add generic compat syscall support
  audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL
  ...
2014-04-12 12:38:53 -07:00
Al Viro 627bf81ac6 get rid of pointless checks for NULL ->i_op
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:16 -04:00
Richard Guy Briggs f1dc4867ff audit: anchor all pid references in the initial pid namespace
Store and log all PIDs with reference to the initial PID namespace and
use the access functions task_pid_nr() and task_tgid_nr() for task->pid
and task->tgid.

Cc: "Eric W. Biederman" <ebiederm@xmission.com>
(informed by ebiederman's c776b5d2)
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
2014-03-20 10:11:55 -04:00
Dmitry Kasatkin a3aef94b31 evm: enable key retention service automatically
If keys are not enabled, EVM is not visible in the configuration menu.
It may be difficult to figure out what to do unless you really know.
Other subsystems as NFS, CIFS select keys automatically. This patch does
the same.

This patch also removes '(TRUSTED_KEYS=y || TRUSTED_KEYS=n)' dependency,
which is unnecessary. EVM does not depend on trusted keys, but on
encrypted keys. evm.h provides compile time dependency.

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-03-07 12:15:49 -05:00
Dmitry Kasatkin 1d91ac6213 ima: skip memory allocation for empty files
Memory allocation is unnecessary for empty files.
This patch calculates the hash without memory allocation.

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-03-07 12:15:48 -05:00
Dmitry Kasatkin e0420039b6 evm: EVM does not use MD5
EVM does not use MD5 HMAC. Selection of CRYPTO_MD5 can be safely removed.

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-03-07 12:15:47 -05:00
Dmitry Kasatkin 61997c4383 ima: return d_name.name if d_path fails
This is a small refactoring so ima_d_path() returns dentry name
if path reconstruction fails. It simplifies callers actions
and removes code duplication.

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-03-07 12:15:46 -05:00
Dmitry Kasatkin 2bb930abcf integrity: fix checkpatch errors
Between checkpatch changes (eg. sizeof) and inconsistencies between
Lindent and checkpatch, unfixed checkpatch errors make it difficult
to see new errors. This patch fixes them. Some lines with over 80 chars
remained unchanged to improve code readability.

The "extern" keyword is removed from internal evm.h to make it consistent
with internal ima.h.

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-03-07 12:15:45 -05:00
Dmitry Kasatkin 09b1148ef5 ima: fix erroneous removal of security.ima xattr
ima_inode_post_setattr() calls ima_must_appraise() to check if the
file needs to be appraised. If it does not then it removes security.ima
xattr. With original policy matching code it might happen that even
file needs to be appraised with FILE_CHECK hook, it might not be
for POST_SETATTR hook. 'security.ima' might be erronously removed.

This patch treats POST_SETATTR as special wildcard function and will
cause ima_must_appraise() to be true if any of the hooks rules matches.
security.ima will not be removed if any of the hooks would require
appraisal.

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-03-07 12:15:44 -05:00
Joe Perches 20ee451f5a security: integrity: Use a more current logging style
Convert printks to pr_<level>.
Add pr_fmt.
Remove embedded prefixes.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-03-07 12:15:21 -05:00
Roberto Sassu e3b64c268b ima: reduce memory usage when a template containing the n field is used
Before this change, to correctly calculate the template digest for the
'ima' template, the event name field (id: 'n') length was set to the fixed
size of 256 bytes.

This patch reduces the length of the event name field to the string
length incremented of one (to make room for the termination character '\0')
and handles the specific case of the digest calculation for the 'ima'
template directly in ima_calc_field_array_hash_tfm().

Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-03-07 11:32:30 -05:00
Roberto Sassu c019e307ad ima: restore the original behavior for sending data with ima template
With the new template mechanism introduced in IMA since kernel 3.13,
the format of data sent through the binary_runtime_measurements interface
is slightly changed. Now, for a generic measurement, the format of
template data (after the template name) is:

template_len | field1_len | field1 | ... | fieldN_len | fieldN

In addition, fields containing a string now include the '\0' termination
character.

Instead, the format for the 'ima' template should be:

SHA1 digest | event name length | event name

It must be noted that while in the IMA 3.13 code 'event name length' is
'IMA_EVENT_NAME_LEN_MAX + 1' (256 bytes), so that the template digest
is calculated correctly, and 'event name' contains '\0', in the pre 3.13
code 'event name length' is exactly the string length and 'event name'
does not contain the termination character.

The patch restores the behavior of the IMA code pre 3.13 for the 'ima'
template so that legacy userspace tools obtain a consistent behavior
when receiving data from the binary_runtime_measurements interface
regardless of which kernel version is used.

Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Cc: <stable@vger.kernel.org> # 3.3.13: 3ce1217 ima: define template fields library
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-03-07 11:32:29 -05:00
Tetsuo Handa 73a6b44a00 Integrity: Pass commname via get_task_comm()
When we pass task->comm to audit_log_untrustedstring(), we need to pass it
via get_task_comm() because task->comm can be changed to contain untrusted
string by other threads after audit_log_untrustedstring() confirmed that
task->comm does not contain untrusted string.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-03-07 11:32:28 -05:00
Mimi Zohar 52a1328484 ima: use static const char array definitions
A const char pointer allocates memory for a pointer as well as for
a string,  This patch replaces a number of the const char pointers
throughout IMA, with a static const char array.

Suggested-by: David Howells <dhowells@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: David Howells <dhowells@redhat.com>
2014-03-07 11:30:36 -05:00
Libo Chen 31d4b76189 ima: new helper: file_inode(file)
Replace "file->f_dentry->d_inode" with the new file_inode() helper
function.

Signed-off-by: Libo Chen <clbchenlibo.chen@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-03-04 16:53:03 -05:00
Sam Ravnborg e0c2de2b15 security: cleanup Makefiles to use standard syntax for specifying sub-directories
The Makefiles in security/ uses a non-standard way to
specify sub-directories for building.

Fix it up so the normal (and documented) approach is used.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2014-02-17 11:08:04 +11:00
Jingoo Han 29707b206c security: replace strict_strto*() with kstrto*()
The usage of strict_strto*() is not preferred, because
strict_strto*() is obsolete. Thus, kstrto*() should be
used.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2014-02-06 19:11:04 +11:00
James Morris 38fd2c202a Merge to v3.13-rc7 for prerequisite changes in the Xen code for TPM 2014-01-06 22:23:01 +11:00
Roberto Sassu dcf4e39286 ima: remove unneeded size_limit argument from ima_eventdigest_init_common()
This patch removes the 'size_limit' argument from
ima_eventdigest_init_common(). Since the 'd' field will never include
the hash algorithm as prefix and the 'd-ng' will always have it, we can
use the hash algorithm to differentiate the two cases in the modified
function (it is equal to HASH_ALGO__LAST in the first case, the opposite
in the second).

Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-01-03 07:43:00 -05:00
Roberto Sassu 712a49bd7d ima: pass HASH_ALGO__LAST as hash algo in ima_eventdigest_init()
Replace the '-1' value with HASH_ALGO__LAST in ima_eventdigest_init()
as the called function ima_eventdigest_init_common() expects an unsigned
char.

Fix commit:
  4d7aeee ima: define new template ima-ng and template fields d-ng and n-ng

Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-01-03 07:42:59 -05:00
Roberto Sassu c502c78ba7 ima: change the default hash algorithm to SHA1 in ima_eventdigest_ng_init()
Replace HASH_ALGO__LAST with HASH_ALGO_SHA1 as the initial value of
the hash algorithm so that the prefix 'sha1:' is added to violation
digests.

Fix commit:
  4d7aeee ima: define new template ima-ng and template fields d-ng and n-ng

Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Cc: <stable@vger.kernel.org> # 3.13.x
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-01-03 07:42:57 -05:00
Roberto Sassu a7ed7c60e1 ima: properly free ima_template_entry structures
The new templates management mechanism records information associated
to an event into an array of 'ima_field_data' structures and makes it
available through the 'template_data' field of the 'ima_template_entry'
structure (the element of the measurements list created by IMA).

Since 'ima_field_data' contains dynamically allocated data (which length
varies depending on the data associated to a selected template field),
it is not enough to just free the memory reserved for a
'ima_template_entry' structure if something goes wrong.

This patch creates the new function ima_free_template_entry() which
walks the array of 'ima_field_data' structures, frees the memory
referenced by the 'data' pointer and finally the space reserved for
the 'ima_template_entry' structure. Further, it replaces existing kfree()
that have a pointer to an 'ima_template_entry' structure as argument
with calls to the new function.

Fixes: a71dc65: ima: switch to new template management mechanism
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
2013-12-02 20:46:56 -05:00
Christoph Paasch 09ae634572 ima: Do not free 'entry' before it is initialized
7bc5f447ce (ima: define new function ima_alloc_init_template() to
API) moved the initialization of 'entry' in ima_add_boot_aggregate() a
bit more below, after the if (ima_used_chip).

So, 'entry' is not initialized while being inside this if-block. So, we
should not attempt to free it.

Found by Coverity (CID: 1131971)

Fixes: 7bc5f447ce (ima: define new function ima_alloc_init_template() to API)
Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
2013-12-02 20:46:32 -05:00
Roberto Sassu af91706d5d ima: store address of template_fmt_copy in a pointer before calling strsep
This patch stores the address of the 'template_fmt_copy' variable in a new
variable, called 'template_fmt_ptr', so that the latter is passed as an
argument of strsep() instead of the former. This modification is needed
in order to correctly free the memory area referenced by
'template_fmt_copy' (strsep() modifies the pointer of the passed string).

Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2013-11-30 13:09:53 +11:00
Roberto Sassu dbc335d2dc ima: make a copy of template_fmt in template_desc_init_fields()
This patch makes a copy of the 'template_fmt' function argument so that
the latter will not be modified by strsep(), which does the splitting by
replacing the given separator with '\0'.

 IMA: No TPM chip found, activating TPM-bypass!
 Unable to handle kernel pointer dereference at virtual kernel address 0000000000842000
 Oops: 0004 [#1] SMP
 Modules linked in:
 CPU: 3 PID: 1 Comm: swapper/0 Not tainted 3.12.0-rc2-00098-g3ce1217d6cd5 #17
 task: 000000003ffa0000 ti: 000000003ff84000 task.ti: 000000003ff84000
 Krnl PSW : 0704e00180000000 000000000044bf88 (strsep+0x7c/0xa0)
            R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 EA:3
 Krnl GPRS: 000000000000007c 000000000000007c 000000003ff87d90 0000000000821fd8
            0000000000000000 000000000000007c 0000000000aa37e0 0000000000aa9008
            0000000000000051 0000000000a114d8 0000000100000002 0000000000842bde
            0000000000842bdf 00000000006f97f0 000000000040062c 000000003ff87cf0
 Krnl Code: 000000000044bf7c: a7f4000a           brc     15,44bf90
            000000000044bf80: b90200cc           ltgr    %r12,%r12
           #000000000044bf84: a7840006           brc     8,44bf90
           >000000000044bf88: 9200c000           mvi     0(%r12),0
            000000000044bf8c: 41c0c001           la      %r12,1(%r12)
            000000000044bf90: e3c020000024       stg     %r12,0(%r2)
            000000000044bf96: b904002b           lgr     %r2,%r11
            000000000044bf9a: ebbcf0700004       lmg     %r11,%r12,112(%r15)
 Call Trace:
 ([<00000000004005fe>] ima_init_template+0xa2/0x1bc)
  [<0000000000a7c896>] ima_init+0x7a/0xa8
  [<0000000000a7c938>] init_ima+0x24/0x40
  [<00000000001000e8>] do_one_initcall+0x68/0x128
  [<0000000000a4eb56>] kernel_init_freeable+0x20a/0x2b4
  [<00000000006a1ff4>] kernel_init+0x30/0x178
  [<00000000006b69fe>] kernel_thread_starter+0x6/0xc
  [<00000000006b69f8>] kernel_thread_starter+0x0/0xc
 Last Breaking-Event-Address:
  [<000000000044bf42>] strsep+0x36/0xa0

Fixes commit: adf53a7 ima: new templates management mechanism

Changelog v1:
- make template_fmt 'const char *' (reported-by James Morris)
- fix kstrdup memory leak (reported-by James Morris)

Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2013-11-25 15:05:33 -05:00
Roberto Sassu 3e8e5503a3 ima: do not send field length to userspace for digest of ima template
This patch defines a new value for the 'ima_show_type' enumerator
(IMA_SHOW_BINARY_NO_FIELD_LEN) to prevent that the field length
is transmitted through the 'binary_runtime_measurements' interface
for the digest field of the 'ima' template.

Fixes commit: 3ce1217 ima: define template fields library and new helpers

Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2013-11-25 07:31:14 -05:00
Roberto Sassu b6f8f16f41 ima: do not include field length in template digest calc for ima template
To maintain compatibility with userspace tools, the field length must not
be included in the template digest calculation for the 'ima' template.

Fixes commit: a71dc65 ima: switch to new template management mechanism

Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2013-11-25 07:26:28 -05:00
Linus Torvalds 34ef7bd382 Revert "ima: define '_ima' as a builtin 'trusted' keyring"
This reverts commit 217091dd7a, which
caused the following build error:

  security/integrity/digsig.c:70:5: error: redefinition of ‘integrity_init_keyring’
  security/integrity/integrity.h:149:12: note: previous definition of ‘integrity_init_keyring’ w
  security/integrity/integrity.h:149:12: warning: ‘integrity_init_keyring’ defined but not used

reported by Krzysztof Kolasa. Mimi says:

 "I made the classic mistake of requesting this patch to be upstreamed
  at the last second, rather than waiting until the next open window.

  At this point, the best course would probably be to revert the two
  commits and fix them for the next open window"

Reported-by: Krzysztof Kolasa <kkolasa@winsoft.pl>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-23 16:36:35 -08:00
Mimi Zohar 217091dd7a ima: define '_ima' as a builtin 'trusted' keyring
Require all keys added to the IMA keyring be signed by an
existing trusted key on the system trusted keyring.

Changelog:
- define stub integrity_init_keyring() function (reported-by Fengguang Wu)
- differentiate between regular and trusted keyring names.
- replace printk with pr_info (D. Kasatkin)

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
2013-10-31 20:20:48 -04:00
Mimi Zohar bcbc9b0cf6 ima: extend the measurement list to include the file signature
This patch defines a new template called 'ima-sig', which includes
the file signature in the template data, in addition to the file's
digest and pathname.

A template is composed of a set of fields.  Associated with each
field is an initialization and display function.  This patch defines
a new template field called 'sig', the initialization function
ima_eventsig_init(), and the display function ima_show_template_sig().

This patch modifies the .field_init() function definition to include
the 'security.ima' extended attribute and length.

Changelog:
- remove unused code (Dmitry Kasatkin)
- avoid calling ima_write_template_field_data() unnecesarily (Roberto Sassu)
- rename DATA_FMT_SIG to DATA_FMT_HEX
- cleanup ima_eventsig_init() based on Roberto's comments

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
2013-10-31 20:19:35 -04:00
Dmitry Kasatkin 3ea7a56067 ima: provide hash algo info in the xattr
All files labeled with 'security.ima' hashes, are hashed using the
same hash algorithm.  Changing from one hash algorithm to another,
requires relabeling the filesystem.  This patch defines a new xattr
type, which includes the hash algorithm, permitting different files
to be hashed with different algorithms.

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2013-10-26 21:32:55 -04:00
Mimi Zohar e7a2ad7eb6 ima: enable support for larger default filedata hash algorithms
The IMA measurement list contains two hashes - a template data hash
and a filedata hash.  The template data hash is committed to the TPM,
which is limited, by the TPM v1.2 specification, to 20 bytes.  The
filedata hash is defined as 20 bytes as well.

Now that support for variable length measurement list templates was
added, the filedata hash is not limited to 20 bytes.  This patch adds
Kconfig support for defining larger default filedata hash algorithms
and replacing the builtin default with one specified on the kernel
command line.

<uapi/linux/hash_info.h> contains a list of hash algorithms.  The
Kconfig default hash algorithm is a subset of this list, but any hash
algorithm included in the list can be specified at boot, using the
'ima_hash=' kernel command line option.

Changelog v2:
- update Kconfig

Changelog:
- support hashes that are configured
- use generic HASH_ALGO_ definitions
- add Kconfig support
- hash_setup must be called only once (Dmitry)
- removed trailing whitespaces (Roberto Sassu)

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
2013-10-26 21:32:55 -04:00
Roberto Sassu 9b9d4ce592 ima: define kernel parameter 'ima_template=' to change configured default
This patch allows users to specify from the kernel command line the
template descriptor, among those defined, that will be used to generate
and display measurement entries. If an user specifies a wrong template,
IMA reverts to the template descriptor set in the kernel configuration.

Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2013-10-26 21:32:54 -04:00
Mimi Zohar 4286587dcc ima: add Kconfig default measurement list template
This patch adds a Kconfig option to select the default IMA
measurement list template.  The 'ima' template limited the
filedata hash to 20 bytes and the pathname to 255 charaters.
The 'ima-ng' measurement list template permits larger hash
digests and longer pathnames.

Changelog:
- keep 'select CRYPTO_HASH_INFO' in 'config IMA' section (Kconfig)
  (Roberto Sassu);
- removed trailing whitespaces (Roberto Sassu).
- Lindent fixes

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
2013-10-26 21:32:54 -04:00
Roberto Sassu add1c05dce ima: defer determining the appraisal hash algorithm for 'ima' template
The same hash algorithm should be used for calculating the file
data hash for the IMA measurement list, as for appraising the file
data integrity.  (The appraise hash algorithm is stored in the
'security.ima' extended attribute.)  The exception is when the
reference file data hash digest, stored in the extended attribute,
is larger than the one supported by the template.  In this case,
the file data hash needs to be calculated twice, once for the
measurement list and, again, for appraisal.

Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2013-10-26 21:32:53 -04:00
Mimi Zohar 5278aa52f3 ima: add audit log support for larger hashes
Different files might be signed based on different hash algorithms.
This patch prefixes the audit log measurement hash with the hash
algorithm.

Changelog:
- use generic HASH_ALGO defintions
- use ':' as delimiter between the hash algorithm and the digest
  (Roberto Sassu)
- always include the hash algorithm used when audit-logging a measurement

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Peter Moody <pmoody@google.com>
2013-10-26 21:32:46 -04:00
Roberto Sassu a71dc65d30 ima: switch to new template management mechanism
This patch performs the switch to the new template mechanism by modifying
the functions ima_alloc_init_template(), ima_measurements_show() and
ima_ascii_measurements_show(). The old function ima_template_show() was
removed as it is no longer needed. Also, if the template descriptor used
to generate a measurement entry is not 'ima', the whole length of field
data stored for an entry is provided before the data itself through the
binary_runtime_measurement interface.

Changelog:
- unnecessary to use strncmp() (Mimi Zohar)
- create new variable 'field' in ima_alloc_init_template() (Roberto Sassu)
- use GFP_NOFS flag in ima_alloc_init_template() (Roberto Sassu)
- new variable 'num_fields' in ima_store_template() (Roberto Sassu,
  proposed by Mimi Zohar)
- rename ima_calc_buffer_hash/template_hash() to ima_calc_field_array_hash(),
  something more generic (Mimi, requested by Dmitry)
- sparse error fix - Fengguang Wu
- fix lindent warnings
- always include the field length in the template data length
- include the template field length variable size in the template data length
- include both the template field data and field length in the template digest
  calculation. Simplifies verifying the template digest. (Mimi)

Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2013-10-25 17:17:06 -04:00
Roberto Sassu 4d7aeee73f ima: define new template ima-ng and template fields d-ng and n-ng
This patch adds support for the new template 'ima-ng', whose format
is defined as 'd-ng|n-ng'.  These new field definitions remove the
size limitations of the original 'ima' template.  Further, the 'd-ng'
field prefixes the inode digest with the hash algorithim, when
displaying the new larger digest sizes.

Change log:
- scripts/Lindent fixes  - Mimi
- "always true comparison" - reported by Fengguang Wu, resolved Dmitry
- initialize hash_algo variable to HASH_ALGO__LAST
- always prefix digest with hash algorithm - Mimi

Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2013-10-25 17:17:05 -04:00
Roberto Sassu 3ce1217d6c ima: define template fields library and new helpers
This patch defines a library containing two initial template fields,
inode digest (d) and file name (n), the 'ima' template descriptor,
whose format is 'd|n', and two helper functions,
ima_write_template_field_data() and ima_show_template_field_data().

Changelog:
- replace ima_eventname_init() parameter NULL checking with BUG_ON.
  (suggested by Mimi)
- include "new template fields for inode digest (d) and file name (n)"
  definitions to fix a compiler warning.  - Mimi
- unnecessary to prefix static function names with 'ima_'. remove
  prefix to resolve Lindent formatting changes. - Mimi
- abbreviated/removed inline comments - Mimi
- always send the template field length - Mimi

Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2013-10-25 17:17:05 -04:00
Roberto Sassu adf53a778a ima: new templates management mechanism
The original 'ima' template is fixed length, containing the filedata hash
and pathname.  The filedata hash is limited to 20 bytes (md5/sha1).  The
pathname is a null terminated string, limited to 255 characters.  To
overcome these limitations and to add additional file metadata, it is
necessary to extend the current version of IMA by defining additional
templates.

The main reason to introduce this feature is that, each time a new
template is defined, the functions that generate and display the
measurement list would include the code for handling a new format and,
thus, would significantly grow over time.

This patch set solves this problem by separating the template management
from the remaining IMA code. The core of this solution is the definition
of two new data structures: a template descriptor, to determine which
information should be included in the measurement list, and a template
field, to generate and display data of a given type.

To define a new template field, developers define the field identifier
and implement two functions, init() and show(), respectively to generate
and display measurement entries.  Initially, this patch set defines the
following template fields (support for additional data types will be
added later):
 - 'd': the digest of the event (i.e. the digest of a measured file),
        calculated with the SHA1 or MD5 hash algorithm;
 - 'n': the name of the event (i.e. the file name), with size up to
        255 bytes;
 - 'd-ng': the digest of the event, calculated with an arbitrary hash
           algorithm (field format: [<hash algo>:]digest, where the digest
           prefix is shown only if the hash algorithm is not SHA1 or MD5);
 - 'n-ng': the name of the event, without size limitations.

Defining a new template descriptor requires specifying the template format,
a string of field identifiers separated by the '|' character.  This patch
set defines the following template descriptors:
 - "ima": its format is 'd|n';
 - "ima-ng" (default): its format is 'd-ng|n-ng'

Further details about the new template architecture can be found in
Documentation/security/IMA-templates.txt.

Changelog:
- don't defer calling ima_init_template() - Mimi
- don't define ima_lookup_template_desc() until used - Mimi
- squashed with documentation patch - Mimi

Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2013-10-25 17:17:04 -04:00
Roberto Sassu 7bc5f447ce ima: define new function ima_alloc_init_template() to API
Instead of allocating and initializing the template entry from multiple
places (eg. boot aggregate, violation, and regular measurements), this
patch defines a new function called ima_alloc_init_template().  The new
function allocates and initializes the measurement entry with the inode
digest and the filename.

In respect to the current behavior, it truncates the file name passed
in the 'filename' argument if the latter's size is greater than 255 bytes
and the passed file descriptor is NULL.

Changelog:
- initialize 'hash' variable for non TPM case - Mimi
- conform to expectation for 'iint' to be defined as a pointer. - Mimi
- add missing 'file' dependency for recalculating file hash. - Mimi

Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2013-10-25 17:17:04 -04:00
Roberto Sassu 9803d413f4 ima: pass the filename argument up to ima_add_template_entry()
Pass the filename argument to ima_add_template_entry() in order to
eliminate a dependency on template specific data (third argument of
integrity_audit_msg).

This change is required because, with the new template management
mechanism, the generation of a new measurement entry will be performed
by new specific functions (introduced in next patches) and the current IMA
code will not be aware anymore of how data is stored in the entry payload.

Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2013-10-25 17:17:03 -04:00
Roberto Sassu 7d802a227b ima: pass the file descriptor to ima_add_violation()
Pass the file descriptor instead of the inode to ima_add_violation(),
to make the latter consistent with ima_store_measurement() in
preparation for the new template architecture.

Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2013-10-25 17:17:02 -04:00
Dmitry Kasatkin 09ef54359c ima: ima_calc_boot_agregate must use SHA1
With multiple hash algorithms, ima_hash_tfm is no longer guaranteed to be sha1.
Need to force to use sha1.

Changelog:
- pass ima_digest_data to ima_calc_boot_aggregate() instead of char *
  (Roberto Sassu);
- create an ima_digest_data structure in ima_add_boot_aggregate()
  (Roberto Sassu);
- pass hash->algo to ima_alloc_tfm() (Roberto Sassu, reported by Dmitry).
- "move hash definition in ima_add_boot_aggregate()" commit hunk to here.
- sparse warning fix - Fengguang Wu

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2013-10-25 17:17:02 -04:00
Dmitry Kasatkin ea593993d3 ima: support arbitrary hash algorithms in ima_calc_buffer_hash
ima_calc_buffer_hash will be used with different hash algorithms.
This patch provides support for arbitrary hash algorithms in
ima_calc_buffer_hash.

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2013-10-25 17:17:01 -04:00
Dmitry Kasatkin 723326b927 ima: provide dedicated hash algo allocation function
This patch provides dedicated hash algo allocation and
deallocation function which can be used by different clients.

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2013-10-25 17:17:01 -04:00
Mimi Zohar 140d802240 ima: differentiate between template hash and file data hash sizes
The TPM v1.2 limits the template hash size to 20 bytes.  This
patch differentiates between the template hash size, as defined
in the ima_template_entry, and the file data hash size, as
defined in the ima_template_data.  Subsequent patches add support
for different file data hash algorithms.

Change log:
- hash digest definition in ima_store_template() should be TPM_DIGEST_SIZE

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
2013-10-25 17:17:00 -04:00
Dmitry Kasatkin a35c3fb649 ima: use dynamically allocated hash storage
For each inode in the IMA policy, an iint is allocated.  To support
larger hash digests, the iint digest size changed from 20 bytes to
the maximum supported hash digest size.  Instead of allocating the
maximum size, which most likely is not needed, this patch dynamically
allocates the needed hash storage.

Changelog:
- fix krealloc bug

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2013-10-25 17:17:00 -04:00
Dmitry Kasatkin b1aaab22e2 ima: pass full xattr with the signature
For possibility to use xattr type for new signature formats,
pass full xattr to the signature verification function.

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2013-10-25 17:16:59 -04:00
Dmitry Kasatkin d3634d0f42 ima: read and use signature hash algorithm
All files on the filesystem, currently, are hashed using the same hash
algorithm.  In preparation for files from different packages being
signed using different hash algorithms, this patch adds support for
reading the signature hash algorithm from the 'security.ima' extended
attribute and calculates the appropriate file data hash based on it.

Changelog:
- fix scripts Lindent and checkpatch msgs - Mimi
- fix md5 support for older version, which occupied 20 bytes in the
  xattr, not the expected 16 bytes.  Fix the comparison to compare
  only the first 16 bytes.

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2013-10-25 17:16:59 -04:00
Dmitry Kasatkin c7c8bb237f ima: provide support for arbitrary hash algorithms
In preparation of supporting more hash algorithms with larger hash sizes
needed for signature verification, this patch replaces the 20 byte sized
digest, with a more flexible structure.  The new structure includes the
hash algorithm, digest size, and digest.

Changelog:
- recalculate filedata hash for the measurement list, if the signature
  hash digest size is greater than 20 bytes.
- use generic HASH_ALGO_
- make ima_calc_file_hash static
- scripts lindent and checkpatch fixes

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2013-10-25 17:16:58 -04:00
Mimi Zohar 08de59eb14 Revert "ima: policy for RAMFS"
This reverts commit 4c2c392763.

Everything in the initramfs should be measured and appraised,
but until the initramfs has extended attribute support, at
least measured.

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Cc: Stable Kernel <stable@kernel.org>
2013-10-25 13:17:19 -04:00
Dmitry Kasatkin 089bc8e95a ima: fix script messages
Fix checkpatch, lindent, etc, warnings/errors

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2013-10-25 13:17:19 -04:00
Tetsuo Handa 9548906b2b xattr: Constify ->name member of "struct xattr".
Since everybody sets kstrdup()ed constant string to "struct xattr"->name but
nobody modifies "struct xattr"->name , we can omit kstrdup() and its failure
checking by constifying ->name member of "struct xattr".

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Joel Becker <jlbec@evilplan.org> [ocfs2]
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Reviewed-by: Paul Moore <paul@paul-moore.com>
Tested-by: Paul Moore <paul@paul-moore.com>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2013-07-25 19:30:03 +10:00
Linus Torvalds f39d420f67 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:
 "In this update, Smack learns to love IPv6 and to mount a filesystem
  with a transmutable hierarchy (i.e.  security labels are inherited
  from parent directory upon creation rather than creating process).

  The rest of the changes are maintenance"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (37 commits)
  tpm/tpm_i2c_infineon: Remove unused header file
  tpm: tpm_i2c_infinion: Don't modify i2c_client->driver
  evm: audit integrity metadata failures
  integrity: move integrity_audit_msg()
  evm: calculate HMAC after initializing posix acl on tmpfs
  maintainers:  add Dmitry Kasatkin
  Smack: Fix the bug smackcipso can't set CIPSO correctly
  Smack: Fix possible NULL pointer dereference at smk_netlbl_mls()
  Smack: Add smkfstransmute mount option
  Smack: Improve access check performance
  Smack: Local IPv6 port based controls
  tpm: fix regression caused by section type conflict of tpm_dev_release() in ppc builds
  maintainers: Remove Kent from maintainers
  tpm: move TPM_DIGEST_SIZE defintion
  tpm_tis: missing platform_driver_unregister() on error in init_tis()
  security: clarify cap_inode_getsecctx description
  apparmor: no need to delay vfree()
  apparmor: fix fully qualified name parsing
  apparmor: fix setprocattr arg processing for onexec
  apparmor: localize getting the security context to a few macros
  ...
2013-07-03 14:04:58 -07:00
David Howells c77cecee52 Replace a bunch of file->dentry->d_inode refs with file_inode()
Replace a bunch of file->dentry->d_inode refs with file_inode().

In __fput(), use file->f_inode instead so as not to be affected by any tricks
that file_inode() might grow.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29 12:57:13 +04:00
Mimi Zohar 9b97b6cdd4 evm: audit integrity metadata failures
Before modifying an EVM protected extended attribute or any other
metadata included in the HMAC calculation, the existing 'security.evm'
is verified.  This patch adds calls to integrity_audit_msg() to audit
integrity metadata failures.

Reported-by: Sven Vermeulen <sven.vermeulen@siphos.be>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2013-06-20 07:47:50 -04:00
Mimi Zohar d726d8d719 integrity: move integrity_audit_msg()
This patch moves the integrity_audit_msg() function and defintion to
security/integrity/, the parent directory, renames the 'ima_audit'
boot command line option to 'integrity_audit', and fixes the Kconfig
help text to reflect the actual code.

Changelog:
- Fixed ifdef inclusion of integrity_audit_msg() (Fengguang Wu)

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2013-06-20 07:47:49 -04:00
Mimi Zohar df2c2afba4 ima: eliminate passing d_name.name to process_measurement()
Passing a pointer to the dentry name, as a parameter to
process_measurement(), causes a race condition with rename() and
is unnecessary, as the dentry name is already accessible via the
file parameter.

In the normal case, we use the full pathname as provided by
brpm->filename, bprm->interp, or ima_d_path().  Only on ima_d_path()
failure, do we fallback to using the d_name.name, which points
either to external memory or d_iname.

Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2013-04-17 17:20:57 -07:00
Sasha Levin b67bfe0d42 hlist: drop the node parameter from iterators
I'm not sure why, but the hlist for each entry iterators were conceived

        list_for_each_entry(pos, head, member)

The hlist ones were greedy and wanted an extra parameter:

        hlist_for_each_entry(tpos, pos, head, member)

Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.

Besides the semantic patch, there was some manual work required:

 - Fix up the actual hlist iterators in linux/list.h
 - Fix up the declaration of other iterators based on the hlist ones.
 - A very small amount of places were using the 'node' parameter, this
 was modified to use 'obj->member' instead.
 - Coccinelle didn't handle the hlist_for_each_entry_safe iterator
 properly, so those had to be fixed up manually.

The semantic patch which is mostly the work of Peter Senna Tschudin is here:

@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;

type T;
expression a,c,d,e;
identifier b;
statement S;
@@

-T b;
    <+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
    ...+>

[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:24 -08:00
Linus Torvalds d895cb1af1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs pile (part one) from Al Viro:
 "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
  locking violations, etc.

  The most visible changes here are death of FS_REVAL_DOT (replaced with
  "has ->d_weak_revalidate()") and a new helper getting from struct file
  to inode.  Some bits of preparation to xattr method interface changes.

  Misc patches by various people sent this cycle *and* ocfs2 fixes from
  several cycles ago that should've been upstream right then.

  PS: the next vfs pile will be xattr stuff."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
  saner proc_get_inode() calling conventions
  proc: avoid extra pde_put() in proc_fill_super()
  fs: change return values from -EACCES to -EPERM
  fs/exec.c: make bprm_mm_init() static
  ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
  ocfs2: fix possible use-after-free with AIO
  ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
  get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
  target: writev() on single-element vector is pointless
  export kernel_write(), convert open-coded instances
  fs: encode_fh: return FILEID_INVALID if invalid fid_type
  kill f_vfsmnt
  vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
  nfsd: handle vfs_getattr errors in acl protocol
  switch vfs_getattr() to struct path
  default SET_PERSONALITY() in linux/elf.h
  ceph: prepopulate inodes only when request is aborted
  d_hash_and_lookup(): export, switch open-coded instances
  9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
  9p: split dropping the acls from v9fs_set_create_acl()
  ...
2013-02-26 20:16:07 -08:00
Mimi Zohar 446d64e3e1 block: fix part_pack_uuid() build error
Commit "85865c1 ima: add policy support for file system uuid"
introduced a CONFIG_BLOCK dependency.  This patch defines a
wrapper called blk_part_pack_uuid(), which returns -EINVAL,
when CONFIG_BLOCK is not defined.

security/integrity/ima/ima_policy.c:538:4: error: implicit declaration
of function 'part_pack_uuid' [-Werror=implicit-function-declaration]

Changelog v2:
- Reference commit number in patch description
Changelog v1:
- rename ima_part_pack_uuid() to blk_part_pack_uuid()
- resolve scripts/checkpatch.pl warnings
Changelog v0:
- fix UUID scripts/Lindent msgs

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: David Rientjes <rientjes@google.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2013-02-26 03:10:52 +11:00
Mimi Zohar a2c2c3a71c ima: "remove enforce checking duplication" merge fix
Commit "750943a ima: remove enforce checking duplication" combined
the 'in IMA policy' and 'enforcing file integrity' checks.  For
the non-file, kernel module verification, a specific check for
'enforcing file integrity' was not added.  This patch adds the
check.

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2013-02-26 02:46:38 +11:00
Al Viro 496ad9aa8e new helper: file_inode(file)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-22 23:31:31 -05:00
Linus Torvalds 33673dcb37 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:
 "This is basically a maintenance update for the TPM driver and EVM/IMA"

Fix up conflicts in lib/digsig.c and security/integrity/ima/ima_main.c

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (45 commits)
  tpm/ibmvtpm: build only when IBM pseries is configured
  ima: digital signature verification using asymmetric keys
  ima: rename hash calculation functions
  ima: use new crypto_shash API instead of old crypto_hash
  ima: add policy support for file system uuid
  evm: add file system uuid to EVM hmac
  tpm_tis: check pnp_acpi_device return code
  char/tpm/tpm_i2c_stm_st33: drop temporary variable for return value
  char/tpm/tpm_i2c_stm_st33: remove dead assignment in tpm_st33_i2c_probe
  char/tpm/tpm_i2c_stm_st33: Remove __devexit attribute
  char/tpm/tpm_i2c_stm_st33: Don't use memcpy for one byte assignment
  tpm_i2c_stm_st33: removed unused variables/code
  TPM: Wait for TPM_ACCESS tpmRegValidSts to go high at startup
  tpm: Fix cancellation of TPM commands (interrupt mode)
  tpm: Fix cancellation of TPM commands (polling mode)
  tpm: Store TPM vendor ID
  TPM: Work around buggy TPMs that block during continue self test
  tpm_i2c_stm_st33: fix oops when i2c client is unavailable
  char/tpm: Use struct dev_pm_ops for power management
  TPM: STMicroelectronics ST33 I2C BUILD STUFF
  ...
2013-02-21 08:18:12 -08:00
Dmitry Kasatkin e0751257a6 ima: digital signature verification using asymmetric keys
Asymmetric keys were introduced in linux-3.7 to verify the signature on
signed kernel modules. The asymmetric keys infrastructure abstracts the
signature verification from the crypto details. This patch adds IMA/EVM
signature verification using asymmetric keys. Support for additional
signature verification methods can now be delegated to the asymmetric
key infrastructure.

Although the module signature header and the IMA/EVM signature header
could use the same format, to minimize the signature length and save
space in the extended attribute, this patch defines a new IMA/EVM
header format.  The main difference is that the key identifier is a
sha1[12 - 19] hash of the key modulus and exponent, similar to the
current implementation.  The only purpose of the key identifier is to
identify the corresponding key in the kernel keyring.  ima-evm-utils
was updated to support the new signature format.

While asymmetric signature verification functionality supports many
different hash algorithms, the hash used in this patch is calculated
during the IMA collection phase, based on the configured algorithm.
The default algorithm is sha1, but for backwards compatibility md5
is supported.  Due to this current limitation, signatures should be
generated using a sha1 hash algorithm.

Changes in this patch:
- Functionality has been moved to separate source file in order to get rid of
  in source #ifdefs.
- keyid is derived according to the RFC 3280. It does not require to assign
  IMA/EVM specific "description" when loading X509 certificate. Kernel
  asymmetric key subsystem automatically generate the description. Also
  loading a certificate does not require using of ima-evm-utils and can be
  done using keyctl only.
- keyid size is reduced to 32 bits to save xattr space.  Key search is done
  using partial match functionality of asymmetric_key_match().
- Kconfig option title was changed

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2013-02-06 21:22:18 -05:00
Dmitry Kasatkin 50af554466 ima: rename hash calculation functions
Rename hash calculation functions to reflect meaning
and change argument order in conventional way.

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2013-02-06 10:41:13 -05:00
Dmitry Kasatkin 76bb28f612 ima: use new crypto_shash API instead of old crypto_hash
Old crypto hash API internally uses shash API.
Using shash API directly is more efficient.

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2013-02-06 10:41:12 -05:00
Dmitry Kasatkin 85865c1fa1 ima: add policy support for file system uuid
The IMA policy permits specifying rules to enable or disable
measurement/appraisal/audit based on the file system magic number.
If, for example, the policy contains an ext4 measurement rule,
the rule is enabled for all ext4 partitions.

Sometimes it might be necessary to enable measurement/appraisal/audit
only for one partition and disable it for another partition of the
same type.  With the existing IMA policy syntax, this can not be done.

This patch provides support for IMA policy rules to specify the file
system by its UUID (eg. fsuuid=397449cd-687d-4145-8698-7fed4a3e0363).

For partitions not being appraised, it might be a good idea to mount
file systems with the 'noexec' option to prevent executing non-verified
binaries.

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2013-02-06 10:40:29 -05:00
Dmitry Kasatkin 74de668424 evm: add file system uuid to EVM hmac
EVM uses the same key for all file systems to calculate the HMAC,
making it possible to paste inodes from one file system on to another
one, without EVM being able to detect it.  To prevent such an attack,
it is necessary to make the EVM HMAC file system specific.

This patch uses the file system UUID, a file system unique identifier,
to bind the EVM HMAC to the file system. The value inode->i_sb->s_uuid
is used for the HMAC hash calculation, instead of using it for deriving
the file system specific key.  Initializing the key for every inode HMAC
calculation is a bit more expensive operation than adding the uuid to
the HMAC hash.

Changing the HMAC calculation method or adding additional info to the
calculation, requires existing EVM labeled file systems to be relabeled.
This patch adds a Kconfig HMAC version option for backwards compatability.

Changelog v1:
- squash "hmac version setting"
Changelog v0:
- add missing Kconfig depends (Mimi)

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2013-02-06 10:40:28 -05:00
Mimi Zohar 5a73fcfa88 ima: differentiate appraise status only for hook specific rules
Different hooks can require different methods for appraising a
file's integrity.  As a result, an integrity appraisal status is
cached on a per hook basis.

Only a hook specific rule, requires the inode to be re-appraised.
This patch eliminates unnecessary appraisals.

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
2013-01-22 16:10:39 -05:00
Mimi Zohar d79d72e024 ima: per hook cache integrity appraisal status
With the new IMA policy 'appraise_type=' option, different hooks
can require different methods for appraising a file's integrity.

For example, the existing 'ima_appraise_tcb' policy defines a
generic rule, requiring all root files to be appraised, without
specfying the appraisal method.  A more specific rule could require
all kernel modules, for example, to be signed.

appraise fowner=0 func=MODULE_CHECK appraise_type=imasig
appraise fowner=0

As a result, the integrity appraisal results for the same inode, but
for different hooks, could differ.  This patch caches the integrity
appraisal results on a per hook basis.

Changelog v2:
- Rename ima_cache_status() to ima_set_cache_status()
- Rename and move get_appraise_status() to ima_get_cache_status()
Changelog v0:
- include IMA_APPRAISE/APPRAISED_SUBMASK in IMA_DO/DONE_MASK (Dmitry)
- Support independent MODULE_CHECK appraise status.
- fixed IMA_XXXX_APPRAISE/APPRAISED flags

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
2013-01-22 16:10:36 -05:00
Mimi Zohar f578c08ec9 ima: increase iint flag size
In preparation for hook specific appraise status results, increase
the iint flags size.

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
2013-01-22 16:10:34 -05:00
Dmitry Kasatkin 0e5a247cb3 ima: added policy support for 'security.ima' type
The 'security.ima' extended attribute may contain either the file data's
hash or a digital signature.  This patch adds support for requiring a
specific extended attribute type.  It extends the IMA policy with a new
keyword 'appraise_type=imasig'.  (Default is hash.)

Changelog v2:
- Fixed Documentation/ABI/testing/ima_policy option syntax
Changelog v1:
- Differentiate between 'required' vs. 'actual' extended attribute

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2013-01-22 16:10:31 -05:00
Dmitry Kasatkin a67adb9974 evm: checking if removexattr is not a NULL
The following lines of code produce a kernel oops.

fd = socket(PF_FILE, SOCK_STREAM|SOCK_CLOEXEC|SOCK_NONBLOCK, 0);
fchmod(fd, 0666);

[  139.922364] BUG: unable to handle kernel NULL pointer dereference at   (null)
[  139.924982] IP: [<  (null)>]   (null)
[  139.924982] *pde = 00000000
[  139.924982] Oops: 0000 [#5] SMP
[  139.924982] Modules linked in: fuse dm_crypt dm_mod i2c_piix4 serio_raw evdev binfmt_misc button
[  139.924982] Pid: 3070, comm: acpid Tainted: G      D      3.8.0-rc2-kds+ #465 Bochs Bochs
[  139.924982] EIP: 0060:[<00000000>] EFLAGS: 00010246 CPU: 0
[  139.924982] EIP is at 0x0
[  139.924982] EAX: cf5ef000 EBX: cf5ef000 ECX: c143d600 EDX: c15225f2
[  139.924982] ESI: cf4d2a1c EDI: cf4d2a1c EBP: cc02df10 ESP: cc02dee4
[  139.924982]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[  139.924982] CR0: 80050033 CR2: 00000000 CR3: 0c059000 CR4: 000006d0
[  139.924982] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[  139.924982] DR6: ffff0ff0 DR7: 00000400
[  139.924982] Process acpid (pid: 3070, ti=cc02c000 task=d7705340 task.ti=cc02c000)
[  139.924982] Stack:
[  139.924982]  c1203c88 00000000 cc02def4 cf4d2a1c ae21eefa 471b60d5 1083c1ba c26a5940
[  139.924982]  e891fb5e 00000041 00000004 cc02df1c c1203964 00000000 cc02df4c c10e20c3
[  139.924982]  00000002 00000000 00000000 22222222 c1ff2222 cf5ef000 00000000 d76efb08
[  139.924982] Call Trace:
[  139.924982]  [<c1203c88>] ? evm_update_evmxattr+0x5b/0x62
[  139.924982]  [<c1203964>] evm_inode_post_setattr+0x22/0x26
[  139.924982]  [<c10e20c3>] notify_change+0x25f/0x281
[  139.924982]  [<c10cbf56>] chmod_common+0x59/0x76
[  139.924982]  [<c10e27a1>] ? put_unused_fd+0x33/0x33
[  139.924982]  [<c10cca09>] sys_fchmod+0x39/0x5c
[  139.924982]  [<c13f4f30>] syscall_call+0x7/0xb
[  139.924982] Code:  Bad EIP value.

This happens because sockets do not define the removexattr operation.
Before removing the xattr, verify the removexattr function pointer is
not NULL.

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: James Morris <james.l.morris@oracle.com>
2013-01-22 00:27:50 +11:00