Граф коммитов

12 Коммитов

Автор SHA1 Сообщение Дата
Jonathan Chocron 4166bfe530 PCI: al: Add Amazon Annapurna Labs PCIe host controller driver
Add driver for Amazon's Annapurna Labs PCIe host controller.  The
controller is based on DesignWare's IP.

The controller doesn't support accessing the Root Port's config space via
ECAM, so we obtain its base address via an AMZN0001 device.

Furthermore, the DesignWare PCIe controller doesn't filter out config
transactions sent to devices 1 and up on its bus, so they are filtered by
the driver.

All subordinate buses do support ECAM access.

Implementing specific PCI config access functions involves:
 - Adding an init function to obtain the Root Port's base address from
   an AMZN0001 device.
 - Adding a new entry in the MCFG quirk array.

[bhelgaas: Note that there is no Kconfig option for this driver because it
is only intended for use with the generic ACPI host bridge driver.  This
driver is only needed because the DesignWare IP doesn't completely support
ECAM access to the root bus.]

Link: https://lore.kernel.org/lkml/1553774276-24675-1-git-send-email-jonnyc@amazon.com
Co-developed-by: Vladimir Aerov <vaerov@amazon.com>
Signed-off-by: Jonathan Chocron <jonnyc@amazon.com>
Signed-off-by: Vladimir Aerov <vaerov@amazon.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2019-04-25 16:33:07 -05:00
Jan Kiszka 01fcb7f777 PCI: Add support for unbinding the generic PCI host controller
Add support for unbinding the generic PCI host controller.  This is
particularly useful when working in virtual environments where the
controller may come and go, but possibly not only there.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Will Deacon <will.deacon@arm.com>
CC: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-05-30 11:35:23 -05:00
Bjorn Helgaas 8cfab3cf63 PCI: Add SPDX GPL-2.0 to replace GPL v2 boilerplate
Add SPDX GPL-2.0 to all PCI files that specified the GPL version 2 license.

Remove the boilerplate GPL version 2 language, relying on the assertion in
b24413180f ("License cleanup: add SPDX GPL-2.0 license identifier to
files with no license") that the SPDX identifier may be used instead of the
full boilerplate text.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-28 15:48:29 -06:00
Marc Gonzalez de5bbdd01c PCI: Change pci_host_common_probe() visibility
pci_host_common_probe() is defined when CONFIG_PCI_HOST_COMMON=y;
therefore the function declaration should match that.

  drivers/pci/host/pcie-tango.c:300:9: error:
	implicit declaration of function 'pci_host_common_probe'

Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-04-18 14:21:04 -05:00
Marc Gonzalez 41334f54a4 PCI: Include pci.h for struct pci_ops definition
struct pci_ecam_ops embeds a struct pci_ops.  Explicitly request the
definition for struct pci_ops, otherwise gcc might complain:

  include/linux/pci-ecam.h:29:19: error: field 'pci_ops' has incomplete type

Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-03-23 08:44:14 -05:00
Duc Dang c5d4603961 PCI: Add MCFG quirks for X-Gene host controller
PCIe controllers in X-Gene SoCs are not ECAM compliant: software needs to
configure additional controller's register to address device at
bus:dev:function.

Add a quirk to discover controller MMIO register space and configure
controller registers to select and address the target secondary device.

The quirk will only be applied for X-Gene PCIe MCFG table with
OEM revison 1, 2, 3 or 4 (PCIe controller v1 and v2 on X-Gene SoCs).

Tested-by: Jon Masters <jcm@redhat.com>
Signed-off-by: Duc Dang <dhdang@apm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-06 13:45:50 -06:00
Tomasz Nowicki 648d93fc77 PCI: Add MCFG quirks for Cavium ThunderX pass1.x host controller
ThunderX pass1.x requires to emulate the EA headers for on-chip devices
hence it has to use custom pci_thunder_ecam_ops for accessing PCI config
space (pci-thunder-ecam.c). Add new entries to MCFG quirk array where it
can be applied while probing ACPI based PCI host controller.

ThunderX pass1.x is using the same way for accessing off-chip devices
(so-called PEM) as silicon pass-2.x so we need to add PEM quirk entries
too.

Quirk is considered for ThunderX silicon pass1.x only which is identified
via MCFG revision 2.

ThunderX pass 1.x requires the following accessors:

  NUMA node 0 PCI segments  0- 3: pci_thunder_ecam_ops (MCFG quirk)
  NUMA node 0 PCI segments  4- 9: thunder_pem_ecam_ops (MCFG quirk)
  NUMA node 1 PCI segments 10-13: pci_thunder_ecam_ops (MCFG quirk)
  NUMA node 1 PCI segments 14-19: thunder_pem_ecam_ops (MCFG quirk)

[bhelgaas: change Makefile/ifdefs so quirk doesn't depend on
CONFIG_PCI_HOST_THUNDER_ECAM]
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-06 13:45:50 -06:00
Tomasz Nowicki 44f22bd91e PCI: Add MCFG quirks for Cavium ThunderX pass2.x host controller
ThunderX PCIe controller to off-chip devices (so-called PEM) is not fully
compliant with ECAM standard. It uses non-standard configuration space
accessors (see thunder_pem_ecam_ops) and custom configuration space
granulation (see bus_shift = 24). In order to access configuration space
and probe PEM as ACPI-based PCI host controller we need to add MCFG quirk
infrastructure. This involves:
1. A new thunder_pem_acpi_init() init function to locate PEM-specific
   register ranges using ACPI.
2. Export PEM thunder_pem_ecam_ops structure so it is visible to MCFG quirk
   code.
3. New quirk entries for each PEM segment. Each contains platform IDs,
   mentioned thunder_pem_ecam_ops and CFG resources.

Quirk is considered for ThunderX silicon pass2.x only which is identified
via MCFG revision 1.

ThunderX pass 2.x requires the following accessors:

  NUMA Node 0 PCI segments  0- 3: pci_generic_ecam_ops (ECAM-compliant)
  NUMA Node 0 PCI segments  4- 9: thunder_pem_ecam_ops (MCFG quirk)
  NUMA Node 1 PCI segments 10-13: pci_generic_ecam_ops (ECAM-compliant)
  NUMA Node 1 PCI segments 14-19: thunder_pem_ecam_ops (MCFG quirk)

[bhelgaas: adapt to use acpi_get_rc_resources(), update Makefile/ifdefs so
quirk doesn't depend on CONFIG_PCI_HOST_THUNDER_PEM]
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-06 13:45:49 -06:00
Dongdong Liu 5f00f1a017 PCI: Add MCFG quirks for HiSilicon Hip05/06/07 host controllers
The PCIe controller in Hip05/Hip06/Hip07 SoCs is not completely
ECAM-compliant.  It is non-ECAM only for the RC bus config space; for any
other bus underneath the root bus it does support ECAM access.

Add specific quirks for PCI config space accessors.  This involves:
1. New initialization call hisi_pcie_init() to obtain RC base
addresses from PNP0C02 at the root of the ACPI namespace (under \_SB).
2. New entry in common quirk array.

[bhelgaas: move to pcie-hisi.c and change Makefile/ifdefs so quirk doesn't
depend on CONFIG_PCI_HISI]
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-06 13:45:49 -06:00
Christopher Covington 2ca5b8ddc6 PCI: Add MCFG quirks for Qualcomm QDF2432 host controller
The Qualcomm Technologies QDF2432 SoC does not support accesses smaller
than 32 bits to the PCI configuration space.  Register the appropriate
quirk.

[bhelgaas: add QCOM_ECAM32 macro, ifdef for ACPI and PCI_QUIRKS]
Signed-off-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-06 13:45:49 -06:00
Jayachandran C 5c3d14f76f PCI: Add parent device field to ECAM struct pci_config_window
Add a parent device field to struct pci_config_window.  The parent is not
saved now, but will be useful to save it in some cases.  For ACPI on ARM64,
it can be used to setup ACPI companion and domain.

Since the parent dev is in struct pci_config_window now, we need not pass
it to the init function as a separate argument.

Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2016-06-10 15:41:08 -05:00
Jayachandran C 80955f9ee5 PCI: Move ecam.h to linux/include/pci-ecam.h
This header will be used from arch/arm64 for ACPI PCI implementation so it
needs to be moved out of drivers/pci.

Update users of the header file to use the new name.  No functional
changes.

Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2016-06-10 15:21:17 -05:00