It appears that compilers have trouble with nested statement
expressions. Therefore, remove one level of statement expression nesting
from the data_race() macro. This will help avoiding potential problems
in the future as its usage increases.
Reported-by: Borislav Petkov <bp@suse.de>
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lkml.kernel.org/r/20200520221712.GA21166@zn.tnic
Link: https://lkml.kernel.org/r/20200521142047.169334-10-elver@google.com
The volatile accesses no longer need to be wrapped in data_race()
because compilers that emit instrumentation distinguishing volatile
accesses are required for KCSAN.
Consequently, the explicit kcsan_check_atomic*() are no longer required
either since the compiler emits instrumentation distinguishing the
volatile accesses.
Finally, simplify __READ_ONCE_SCALAR() and remove __WRITE_ONCE_SCALAR().
[ bp: Convert commit message to passive voice. ]
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20200521142047.169334-9-elver@google.com
Document change in required compiler version for KCSAN, and remove the
now redundant note about __no_kcsan and inlining problems with older
compilers.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20200521142047.169334-8-elver@google.com
Some compilers incorrectly inline small __no_kcsan functions, which then
results in instrumenting the accesses. For this reason, the 'noinline'
attribute was added to __no_kcsan_or_inline. All known versions of GCC
are affected by this. Supported versions of Clang are unaffected, and
never inline a no_sanitize function.
However, the attribute 'noinline' in __no_kcsan_or_inline causes
unexpected code generation in functions that are __no_kcsan and call a
__no_kcsan_or_inline function.
In certain situations it is expected that the __no_kcsan_or_inline
function is actually inlined by the __no_kcsan function, and *no* calls
are emitted. By removing the 'noinline' attribute, give the compiler
the ability to inline and generate the expected code in __no_kcsan
functions.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/CANpmjNNOpJk0tprXKB_deiNAv_UmmORf1-2uajLhnLWQQ1hvoA@mail.gmail.com
Link: https://lkml.kernel.org/r/20200521142047.169334-6-elver@google.com
Clang (unlike GCC) removes reads before writes with matching addresses
in the same basic block. This is an optimization for TSAN, since writes
will always cause conflict if the preceding read would have.
However, for KCSAN we cannot rely on this option, because we apply
several special rules to writes, in particular when the
KCSAN_ASSUME_PLAIN_WRITES_ATOMIC option is selected. To avoid missing
potential data races, pass the -tsan-instrument-read-before-write option
to Clang if it is available [1].
[1] 151ed6aa38
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20200521142047.169334-5-elver@google.com
In the kernel, the "volatile" keyword is used in various concurrent
contexts, whether in low-level synchronization primitives or for
legacy reasons. If supported by the compiler, it will be assumed
that aligned volatile accesses up to sizeof(long long) (matching
compiletime_assert_rwonce_type()) are atomic.
Recent versions of Clang [1] (GCC tentative [2]) can instrument
volatile accesses differently. Add the option (required) to enable the
instrumentation, and provide the necessary runtime functions. None of
the updated compilers are widely available yet (Clang 11 will be the
first release to support the feature).
[1] 5a2c31116f
[2] https://gcc.gnu.org/pipermail/gcc-patches/2020-April/544452.html
This change allows removing of any explicit checks in primitives such as
READ_ONCE() and WRITE_ONCE().
[ bp: Massage commit message a bit. ]
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200521142047.169334-4-elver@google.com
The first version of Clang that supports -tsan-distinguish-volatile will
be able to support KCSAN. The first Clang release to do so, will be
Clang 11. This is due to satisfying all the following requirements:
1. Never emit calls to __tsan_func_{entry,exit}.
2. __no_kcsan functions should not call anything, not even
kcsan_{enable,disable}_current(), when using __{READ,WRITE}_ONCE => Requires
leaving them plain!
3. Support atomic_{read,set}*() with KCSAN, which rely on
arch_atomic_{read,set}*() using __{READ,WRITE}_ONCE() => Because of
#2, rely on Clang 11's -tsan-distinguish-volatile support. We will
double-instrument atomic_{read,set}*(), but that's reasonable given
it's still lower cost than the data_race() variant due to avoiding 2
extra calls (kcsan_{en,dis}able_current() calls).
4. __always_inline functions inlined into __no_kcsan functions are never
instrumented.
5. __always_inline functions inlined into instrumented functions are
instrumented.
6. __no_kcsan_or_inline functions may be inlined into __no_kcsan functions =>
Implies leaving 'noinline' off of __no_kcsan_or_inline.
7. Because of #6, __no_kcsan and __no_kcsan_or_inline functions should never be
spuriously inlined into instrumented functions, causing the accesses of the
__no_kcsan function to be instrumented.
Older versions of Clang do not satisfy #3. The latest GCC currently
doesn't support at least #1, #3, and #7.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/CANpmjNMTsY_8241bS7=XAfqvZHFLrVEkv_uM4aDUWE_kh3Rvbw@mail.gmail.com
Link: https://lkml.kernel.org/r/20200521142047.169334-7-elver@google.com
To avoid inserting __tsan_func_{entry,exit}, add option if supported by
compiler. Currently only Clang can be told to not emit calls to these
functions. It is safe to not emit these, since KCSAN does not rely on
them.
Note that, if we disable __tsan_func_{entry,exit}(), we need to disable
tail-call optimization in sanitized compilation units, as otherwise we
may skip frames in the stack trace; in particular when the tail called
function is one of the KCSAN's runtime functions, and a report is
generated, we might miss the function where the actual access occurred.
Since __tsan_func_{entry,exit}() insertion effectively disabled
tail-call optimization, there should be no observable change.
This was caught and confirmed with kcsan-test & UNWINDER_ORC.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200521142047.169334-3-elver@google.com
Clang does not allow -fsanitize-coverage=trace-{pc,cmp} together
with -fsanitize=bounds or with ubsan:
clang: error: argument unused during compilation: '-fsanitize-coverage=trace-pc' [-Werror,-Wunused-command-line-argument]
clang: error: argument unused during compilation: '-fsanitize-coverage=trace-cmp' [-Werror,-Wunused-command-line-argument]
To avoid the warning, check whether clang can handle this correctly or
disallow ubsan and kcsan when kcov is enabled.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marco Elver <elver@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://bugs.llvm.org/show_bug.cgi?id=45831
Link: https://lore.kernel.org/lkml/20200505142341.1096942-1-arnd@arndb.de
Link: https://lkml.kernel.org/r/20200521142047.169334-2-elver@google.com
Merge the state of the locking kcsan branch before the read/write_once()
and the atomics modifications got merged.
Squash the fallout of the rebase on top of the read/write once and atomic
fallback work into the merge. The history of the original branch is
preserved in tag locking-kcsan-2020-06-02.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* 32bit VM fixes:
- Fix embarassing mapping issue between AArch32 CSSELR and AArch64
ACTLR
- Add ACTLR2 support for AArch32
- Get rid of the useless ACTLR_EL1 save/restore
- Fix CP14/15 accesses for AArch32 guests on BE hosts
- Ensure that we don't loose any state when injecting a 32bit
exception when running on a VHE host
* 64bit VM fixes:
- Fix PtrAuth host saving happening in preemptible contexts
- Optimize PtrAuth lazy enable
- Drop vcpu to cpu context pointer
- Fix sparse warnings for HYP per-CPU accesses
-----BEGIN PGP SIGNATURE-----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=I2Li
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for Linux 5.8, take #1
* 32bit VM fixes:
- Fix embarassing mapping issue between AArch32 CSSELR and AArch64
ACTLR
- Add ACTLR2 support for AArch32
- Get rid of the useless ACTLR_EL1 save/restore
- Fix CP14/15 accesses for AArch32 guests on BE hosts
- Ensure that we don't loose any state when injecting a 32bit
exception when running on a VHE host
* 64bit VM fixes:
- Fix PtrAuth host saving happening in preemptible contexts
- Optimize PtrAuth lazy enable
- Drop vcpu to cpu context pointer
- Fix sparse warnings for HYP per-CPU accesses
Pull crypto fixes from Herbert Xu:
"A number of fixes to the omap and nitrox drivers"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: cavium/nitrox - Fix 'nitrox_get_first_device()' when ndevlist is fully iterated
crypto: omap-sham - add proper load balancing support for multicore
crypto: omap-aes - prevent unregistering algorithms twice
crypto: omap-sham - fix very small data size handling
crypto: omap-sham - huge buffer access fixes
crypto: omap-crypto - fix userspace copied buffer access
crypto: omap-sham - force kernel driver usage for sha algos
crypto: omap-aes - avoid spamming console with self tests
__kvm_set_memory_region does not use the hva at all, so trying to
catch use-after-delete is pointless and, worse, it fails access_ok
now that we apply it to all memslots including private kernel ones.
This fixes an AVIC regression.
Fixes: 09d952c971 ("KVM: check userspace_addr for all memslots")
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Teach XFS to ask the VFS to drop an inode if the administrator changes
the FS_XFLAG_DAX inode flag such that the S_DAX state would change.
This can result in files changing access modes without requiring an
unmount cycle.
-----BEGIN PGP SIGNATURE-----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=mKZf
-----END PGP SIGNATURE-----
Merge tag 'vfs-5.8-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull DAX updates part three from Darrick Wong:
"Now that the xfs changes have landed, this third piece changes the
FS_XFLAG_DAX ioctl code in xfs to request that the inode be reloaded
after the last program closes the file, if doing so would make a S_DAX
change happen. The goal here is to make dax access mode switching
quicker when possible.
Summary:
- Teach XFS to ask the VFS to drop an inode if the administrator
changes the FS_XFLAG_DAX inode flag such that the S_DAX state would
change. This can result in files changing access modes without
requiring an unmount cycle"
* tag 'vfs-5.8-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
fs/xfs: Update xfs_ioctl_setattr_dax_invalidate()
fs/xfs: Combine xfs_diflags_to_linux() and xfs_diflags_to_iflags()
fs/xfs: Create function xfs_inode_should_enable_dax()
fs/xfs: Make DAX mount option a tri-state
fs/xfs: Change XFS_MOUNT_DAX to XFS_MOUNT_DAX_ALWAYS
fs/xfs: Remove unnecessary initialization of i_rwsem
I measured a 50% throughput regression for large direct writes.
The observed on-the-wire behavior is that the client sends every
NFS WRITE twice: once as an UNSTABLE WRITE plus a COMMIT, and once
as a FILE_SYNC WRITE.
This is because the nfs_write_match_verf() check in
nfs_direct_commit_complete() fails for every WRITE.
Buffered writes use nfs_write_completion(), which sets req->wb_verf
correctly. Direct writes use nfs_direct_write_completion(), which
does not set req->wb_verf at all. This leaves req->wb_verf set to
all zeroes for every direct WRITE, and thus
nfs_direct_commit_completion() always sets NFS_ODIRECT_RESCHED_WRITES.
This fix appears to restore nearly all of the lost performance.
Fixes: 1f28476dcb ("NFS: Fix O_DIRECT commit verifier handling")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Help troubleshoot the logic that uses these flags.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Fix the following sparse warning:
net/sunrpc/xprtrdma/transport.c:71:14: warning: symbol 'xprt_rdma_slot_table_entries'
was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Use the following command to test nfsv4(size of file1M is 1MB):
mount -t nfs -o vers=4.0,actimeo=60 127.0.0.1/dir1 /mnt
cp file1M /mnt
du -h /mnt/file1M -->0 within 60s, then 1M
When write is done(cp file1M /mnt), will call this:
nfs_writeback_done
nfs4_write_done
nfs4_write_done_cb
nfs_writeback_update_inode
nfs_post_op_update_inode_force_wcc_locked(change, ctime, mtime
nfs_post_op_update_inode_force_wcc_locked
nfs_set_cache_invalid
nfs_refresh_inode_locked
nfs_update_inode
nfsd write response contains change, ctime, mtime, the flag will be
clear after nfs_update_inode. Howerver, write response does not contain
space_used, previous open response contains space_used whose value is 0,
so inode->i_blocks is still 0.
nfs_getattr -->called by "du -h"
do_update |= force_sync || nfs_attribute_cache_expired -->false in 60s
cache_validity = READ_ONCE(NFS_I(inode)->cache_validity)
do_update |= cache_validity & (NFS_INO_INVALID_ATTR -->false
if (do_update) {
__nfs_revalidate_inode
}
Within 60s, does not send getattr request to nfsd, thus "du -h /mnt/file1M"
is 0.
Add a NFS_INO_INVALID_BLOCKS flag, set it when nfsv4 write is done.
Fixes: 16e1437517 ("NFS: More fine grained attribute tracking")
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The variable result is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When I cat parameter
'/sys/module/sunrpc/parameters/auth_hashtable_size', it displays as
follows. It is better to add a newline for easy reading.
[root@hulk-202 ~]# cat /sys/module/sunrpc/parameters/auth_hashtable_size
16[root@hulk-202 ~]#
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
A short read can generate an -EIO error without there being an error
on the wire. This tracepoint acts as an eyecatcher when there is no
obvious I/O error.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When sunrpc trace points are not enabled, the recorded task ID
information alone is not helpful.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Move the RPC_TASK_SOFTCONN flag into rpc_call_null_helper(). The
only minor behavior change is that it is now also set when
destroying GSS contexts.
This gives a better guarantee that gss_send_destroy_context() will
not hang for long if a connection cannot be established.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up.
All of rpc_call_null_helper() call sites assert RPC_TASK_SOFT, so
move that setting into rpc_call_null_helper() itself.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up.
Commit a52458b48a ("NFS/NFSD/SUNRPC: replace generic creds with
'struct cred'.") made rpc_call_null_helper() set RPC_TASK_NULLCREDS
unconditionally. Therefore there's no need for
rpc_call_null_helper()'s call sites to set RPC_TASK_NULLCREDS.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The "create" tracepoint records parts of the rpc_create arguments,
and the shutdown tracepoint records when the rpc_clnt is about to
signal pending tasks and destroy auths.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Refactor: Hoist create/destroy/disconnect tracepoints out of
xprtrdma and into the generic RPC client. Some benefits include:
- Enable tracing of xprt lifetime events for the socket transport
types
- Expose the different types of disconnect to help run down
issues with lingering connections
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
To help tie the recorded xdr_buf to a particular RPC transaction,
the client side version of this class should display task ID
information and the server side one should show the request's XID.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Add a tracepoint in another common exit point for failing RPCs.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: remove unnecessary commas, and fix a white-space nit.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Recent additions to the RPC_TASK flags neglected to update
the tracepoint ENUM definitions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Avoid unnecessary cache sloshing by placing the buffer size
estimation update logic behind an atomic bit flag.
The size of GSS information included in each wrapped Reply does
not change during the lifetime of a GSS context. Therefore, the
au_rslack and au_ralign fields need to be updated only once after
establishing a fresh GSS credential.
Thus a slack size update must occur after a cred is created,
duplicated, renewed, or expires. I'm not sure I have this exactly
right. A trace point is introduced to track updates to these
variables to enable troubleshooting the problem if I missed a spot.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
- Keep nfsd clients from unnecessarily breaking their own delegations:
Note this requires a small kthreadd addition, discussed at:
https://lore.kernel.org/r/1588348912-24781-1-git-send-email-bfields@redhat.com
The result is Tejun Heo's suggestion, and he was OK with this going
through my tree.
- Patch nfsd/clients/ to display filenames, and to fix byte-order when
displaying stateid's.
- fix a module loading/unloading bug, from Neil Brown.
- A big series from Chuck Lever with RPC/RDMA and tracing improvements,
and lay some groundwork for RPC-over-TLS.
Note Stephen Rothwell spotted two conflicts in linux-next. Both should
be straightforward:
include/trace/events/sunrpc.h
https://lore.kernel.org/r/20200529105917.50dfc40f@canb.auug.org.au
net/sunrpc/svcsock.c
https://lore.kernel.org/r/20200529131955.26c421db@canb.auug.org.au
-----BEGIN PGP SIGNATURE-----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=YEf0
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.8' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"Highlights:
- Keep nfsd clients from unnecessarily breaking their own
delegations.
Note this requires a small kthreadd addition. The result is Tejun
Heo's suggestion (see link), and he was OK with this going through
my tree.
- Patch nfsd/clients/ to display filenames, and to fix byte-order
when displaying stateid's.
- fix a module loading/unloading bug, from Neil Brown.
- A big series from Chuck Lever with RPC/RDMA and tracing
improvements, and lay some groundwork for RPC-over-TLS"
Link: https://lore.kernel.org/r/1588348912-24781-1-git-send-email-bfields@redhat.com
* tag 'nfsd-5.8' of git://linux-nfs.org/~bfields/linux: (49 commits)
sunrpc: use kmemdup_nul() in gssp_stringify()
nfsd: safer handling of corrupted c_type
nfsd4: make drc_slab global, not per-net
SUNRPC: Remove unreachable error condition in rpcb_getport_async()
nfsd: Fix svc_xprt refcnt leak when setup callback client failed
sunrpc: clean up properly in gss_mech_unregister()
sunrpc: svcauth_gss_register_pseudoflavor must reject duplicate registrations.
sunrpc: check that domain table is empty at module unload.
NFSD: Fix improperly-formatted Doxygen comments
NFSD: Squash an annoying compiler warning
SUNRPC: Clean up request deferral tracepoints
NFSD: Add tracepoints for monitoring NFSD callbacks
NFSD: Add tracepoints to the NFSD state management code
NFSD: Add tracepoints to NFSD's duplicate reply cache
SUNRPC: svc_show_status() macro should have enum definitions
SUNRPC: Restructure svc_udp_recvfrom()
SUNRPC: Refactor svc_recvfrom()
SUNRPC: Clean up svc_release_skb() functions
SUNRPC: Refactor recvfrom path dealing with incomplete TCP receives
SUNRPC: Replace dprintk() call sites in TCP receive path
...
The Rockchip Video Decoder driver is expecting that the values in a
scaling list are in zig-zag order and applies the inverse scanning process
to get the values in matrix order.
Commit 0b0393d59e ("media: uapi: h264: clarify expected
scaling_list_4x4/8x8 order") clarified that the values in the scaling list
should already be in matrix order.
Fix this by removing the reordering and change to use two memcpy.
Fixes: cd33c83044 ("media: rkvdec: Add the rkvdec driver")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
[hverkuil-cisco@xs4all.nl: rkvdec_scaling_matrix -> rkvdec_h264_scaling_list]
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Wrong loop filter flag is unset when tiles enabled flag is not set,
this cause HEVC decoding issues with Rockchip Video Decoder.
Fix this by unsetting the loop filter across tiles enabled flag instead of
the pps loop filter across slices enabled flag when tiles are disabled.
Fixes: 256fa39208 ("media: v4l: Add definitions for HEVC stateless decoding")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Commit 9495b7e92f ("driver core: platform:
Initialize dma_parms for platform devices") in v5.7-rc5 causes
vb2_dma_contig_clear_max_seg_size() to kfree memory that was not
allocated by vb2_dma_contig_set_max_seg_size().
The assumption in vb2_dma_contig_set_max_seg_size() seems to be that
dev->dma_parms is always NULL when the driver is probed, and the case
where dev->dma_parms has bee initialized by someone else than the driver
(by calling vb2_dma_contig_set_max_seg_size) will cause a failure.
All the current users of these functions are platform devices, which now
always have dma_parms set by the driver core. To fix the issue for v5.7,
make vb2_dma_contig_set_max_seg_size() return an error if dma_parms is
NULL to be on the safe side, and remove the kfree code from
vb2_dma_contig_clear_max_seg_size().
For v5.8 we should remove the two functions and move the
dma_set_max_seg_size() calls into the drivers.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Fixes: 9495b7e92f ("driver core: platform: Initialize dma_parms for platform devices")
Cc: stable@vger.kernel.org
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Remove description of non-existing v4l2_subdev.nevents and replace the
undefined flag V4L2_SUBDEV_USES_EVENTS by the correct flag
V4L2_SUBDEV_FL_HAS_EVENTS, which is already documented in v4l2_subdev.flags
Fixes: commit 02adb1cc76 ("[media] v4l: subdev: Events support")
Signed-off-by: Michael Rodin <mrodin@de.adit-jv.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Commit 9495b7e92f ("driver core: platform: Initialize dma_parms for
platform devices") in v5.7-rc5 added allocation of dma_parms structure to
all platform devices. Then vb2_dma_contig_set_max_seg_size() have been
changed not to allocate dma_parms structure and rely on the one allocated
by the device core. Lets allocate the needed structure also for the
devices created for the 2 MFC device memory ports.
Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Fixes: 9495b7e92f ("driver core: platform: Initialize dma_parms for platform devices")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Recently, MEDIA_CEC_SUPPORT became indepedent of MEDIA_SUPPORT.
However, if MEDIA_SUPPORT is not enabled, MEDIA_SUPPORT_FILTER is not
defined, and MEDIA_CEC_SUPPORT is thus enabled by default, which is not
desirable.
Fix this by adding a dependency on MEDIA_CEC_SUPPORT to the default
configuration.
Fixes: 46d2a3b964 ("media: place CEC menu before MEDIA_SUPPORT")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This allows the VE clocks and PLL_VE to be disabled most of the time.
A runtime PM reference is held while streaming.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Previously, the output format was programmed as part of the ioctl()
handler. However, this has two problems:
1) If there are multiple active streams with different output
formats, the hardware will use whichever format was set last
for both streams. Similarly, an ioctl() done in an inactive
context will wrongly affect other active contexts.
2) The registers are written while the device is not actively
streaming. To enable runtime PM tied to the streaming state,
all hardware access needs to be moved inside cedrus_device_run().
The call to cedrus_dst_format_set() is now placed just before the
codec-specific callback that programs the hardware.
Cc: <stable@vger.kernel.org>
Fixes: 50e761516f ("media: platform: Add Cedrus VPU decoder driver")
Suggested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Suggested-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Tested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
As there are several ways where the driver could possible
retrieve sensor data, make the prints clearer about what
was detected and from where.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Now that the EFI _DSM table is parsed by the driver, we don't
need a DMI match anymore for Asus Transform T101HA.
This reverts commit 0a76fd8e8d.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This reverts commit 0d64e94205.
As gmin_subdev_add() now takes the ACPI handle directly,
we can deprecate the code that were doing this inside each
I2C driver.
PS.: This also reverts commit c03496b3bd ("media: atomisp: add a notice about possible leak resources")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Instead of keep hardcoding device-specific tables, read them
directly from the ACPI BIOS, if available.
This method is know to work with Asus T101HA device. the
same table is also visible on EzPad devices. So, it seems
that at least some BIOSes use this method to pass data about
ISP2401-connected sensors.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The hive_isp_css_custom_host_hrt.h code, together
with atomisp_helper.h, provides an abstraction layer for
some functions inside atomisp_compat_css20.c and atomisp_cmd.c.
There's no good reason for that. In a matter of fact, after
removing the abstraction, the code looked a lot cleaner
and easier to understand.
So, get rid of them.
While here, get rid also of the udelay(1) abstraction code.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Some parts of the driver have their own implementation of
memcpy() & friends. Replace all of them by strscpy().
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Replace usages of strcpy(), strlcpy() and strncpy() in favor
of strscpy().
Suggested-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Marco Elver
Arnd Bergmann
Thomas Gleixner
Paolo Bonzini
Linus Torvalds
Chuck Lever
Zou Wei
Zheng Bin
Colin Ian King
Xiongfeng Wang
Jonas Karlman
Tomi Valkeinen
Michael Rodin
Marek Szyprowski
Geert Uytterhoeven
Jernej Skrabec
Samuel Holland
Mauro Carvalho Chehab