Граф коммитов

52496 Коммитов

Автор SHA1 Сообщение Дата
David Woodhouse fcf3cafb3e [JFFS2] Remove another bogus optimisation in jffs2_add_tn_to_tree()
We attempted to insert new nodes into the tree by just using
rb_replace_node to let them replace an earlier node which they
completely overlapped. However, that could place the new node into the
wrong place in the tree, since its start could be node only before the
start of the victim, but before the node _before_ the victim in the tree
(if that previous node actually ends _after_ the new node, thus isn't
entirely overlapped and wasn't itself chosen to be the victim).

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-05-07 13:16:13 +01:00
David Woodhouse 96dd8d25d1 [JFFS2] Remove broken insert_point optimisation in jffs2_add_tn_to_tree()
The original code would remember, during the first pass over the tree,
a suitable place to start the insertion from when we eventually come
to add a new node.

The optimisation was broken, and we sometimes ended up inserting a new
node in the wrong place because we started the insertion from the wrong
point.

Just ditch the optimisation and start the insertion from the root of the
tree, for now. I'll try it again when I'm feeling cleverer.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-05-06 14:41:40 +01:00
David Woodhouse 1123e2a859 [JFFS2] Remember to calculate overlap on nodes which replace older nodes
This fixes a problem Artem found with the integck test tool -- we
weren't correctly keeping track of the 'overlap' flag in some cases,
which led to the nodes being played back in an incorrect order and file
corruption.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-05-05 16:29:34 +01:00
David Woodhouse 3fddb6c985 [JFFS2] Don't advance c->wbuf_ofs to next eraseblock after wbuf flush
After flushing the last page of an eraseblock, don't leave the
wbuf 'offset' field pointing at the start of the next physical
eraseblock. This was causing a BUG() on NOR-ECC (Sibley) flash, where
we start writing a little further in, after the cleanmarker.

Debugged by Alexander Belyakov <abelyako@googlemail.com>

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-05-05 09:52:49 +01:00
Andrew Victor 693ef66d89 [MTD] [NAND] at91_nand.c: CMDLINE_PARTS support
This patch allows you to specify at91_nand partitions on the
kernel command line using the mtdparts variable, if
CONFIG_MTD_CMDLINE_PARTS is set.

Signed-off-by: Frank Mandarino <fmandarino@endrelia.com>
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-05-03 07:40:41 +01:00
Thomas Knobloch 1a12f46af1 [MTD] [NAND] Tidy up handling of page number in nand_block_bad()
Further to the previous patch fixing the calculation of page number,
both branches are using the same result. Clean up the function 
accordingly, calculating it (and also masking with pagemask) only in one 
place.

Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-05-03 07:39:37 +01:00
Adrian Bunk 4839f0481d [MTD] block2mtd_paramline[] mustn't be __initdata
block2mtd_paramline[] is used in the non-__init block2mtd_setup()

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Joern Engel <joern@lazybastard.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-05-02 12:33:17 +01:00
David Woodhouse 048c37b490 [MTD] [NAND] Support multiple chips in CAFÉ driver
The CAFÉ can handle two chip on separate chipselect lines. Hook up the
undocumented chipselect bits in the driver and probe both.

In the case of OLPC, it's not actually two separate devices -- it's a
single '1GiB' package with two 512MiB dies internally. So clear the
NAND_BBT_PERCHIP flag to treat it as a single chip for BBT purposes, and
make life easier for the firmware.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-05-02 12:26:37 +01:00
David Woodhouse 14448005ab [MTD] [NAND] Rename cafe.c to cafe_nand.c and remove the multi-obj magic
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-05-02 12:04:57 +01:00
Segher Boessenkool 8c61b7a7f4 [MTD] [NAND] Use rslib for CAFÉ ECC
Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-05-02 12:00:20 +01:00
Segher Boessenkool d7e5a5462f [RSLIB] Support non-canonical GF representations
For the CAFÉ NAND controller, we need to support non-canonical 
representations of the Galois field. Allow the caller to provide its own 
function for generating the field, and CAFÉ can use rslib instead of its
own implementation.

Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-05-02 11:56:33 +01:00
David Woodhouse 7c96b7a146 [JFFS2] Remove dead file histo_mips.h
Its contents were subsumed into compr_rubin.c in a previous
commit, but I forgot to git-rm it.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-05-02 08:36:21 +01:00
Thomas Gleixner 431bca73f7 [MTD] Add Kyungmin Park to MAINTAINERS for OneNAND
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-05-02 08:33:31 +01:00
Linus Torvalds f00546363f Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6: (46 commits)
  [MTD] [MAPS] drivers/mtd/maps/ck804xrom.c: convert pci_module_init()
  [MTD] [NAND] CM-x270 MTD driver
  [MTD] [NAND] Wrong calculation of page number in nand_block_bad()
  [MTD] [MAPS] fix plat-ram printk format
  [JFFS2] Fix compr_rubin.c build after include file elimination.
  [JFFS2] Handle inodes with only a single metadata node with non-zero isize
  [JFFS2] Tidy up licensing/copyright boilerplate.
  [MTD] [OneNAND] Exit loop only when column start with 0
  [MTD] [OneNAND] Fix access the past of the real oobfree array
  [MTD] [OneNAND] Update Samsung OneNAND official URL
  [JFFS2] Better fix for all-zero node headers
  [JFFS2] Improve read_inode memory usage, v2.
  [JFFS2] Improve failure mode if inode checking leaves unchecked space.
  [JFFS2] Fix cross-endian build.
  [MTD] Finish conversion mtd_blkdevs to use the kthread API
  [JFFS2] Obsolete dirent nodes immediately on unlink, where possible.
  Use menuconfig objects: MTD
  [MTD] mtd_blkdevs: Convert to use the kthread API
  [MTD] Fix fwh_lock locking
  [JFFS2] Speed up mount for directly-mapped NOR flash
  ...
2007-04-27 15:34:57 -07:00
Adrian Bunk 28b57cddb3 [MTD] [MAPS] drivers/mtd/maps/ck804xrom.c: convert pci_module_init()
This patch converts the pci_module_init() usage to pci_register_driver().

It's currently #if 0'ed, but still not a bad idea to change it.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-27 23:34:21 +01:00
Mike Rapoport 54d33c4c71 [MTD] [NAND] CM-x270 MTD driver
This patch provides MTD support for NAND flash devices on CM-x270 modules.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-27 23:04:32 +01:00
Linus Torvalds 50f732ee63 Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (78 commits)
  USB: update MAINAINERS and CREDITS for Freescale USB driver
  USB: update gadget files for fsl_usb2_udc driver
  USB: add Freescale high-speed USB SOC device controller driver
  USB: quirk for broken suspend of IT8152F/G
  USB: iowarrior.c: timeouts too small in usb_control_msg calls
  USB: dell device id for option.c
  USB: Remove Huawei unusual_devs entry
  USB: CP2101 New Device IDs
  USB: add picdem device to ldusb
  usbfs micro optimitation
  USB: remove ancient/broken CRIS hcd
  usb ethernet gadget, workaround network stack API glitch
  USB: add "busnum" attribute for USB devices
  USB: cxacru: ADSL state management
  usbatm: Detect usb device shutdown and ignore failed urbs
  USB: Remove duplicate define of OHCI_QUIRK_ZFMICRO
  USB: BandRich BandLuxe HSDPA Data Card Driver
  USB gadget rndis: fix struct rndis_packet_msg_type unaligned bug
  USB Elan FTDI: check for driver registration status
  USB: sierra: add more checks on shutdown
  ...
2007-04-27 14:19:17 -07:00
Linus Torvalds aa5bc2b58e Merge branch 'master' of ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb
* 'master' of ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (184 commits)
  V4L/DVB (5563): Radio-maestro.c Replace radio_ioctl to use video_ioctl2
  V4L/DVB (5562): Radio-gemtek-pci.c Replace gemtek_pci_ioctl to use video_ioctl2
  V4L/DVB (5560): Ivtv: fix incorrect bitwise-and for command flags.
  V4L/DVB (5558): Opera: use 7-bit i2c addresses
  V4L/DVB (5557): Cafe_ccic: check return value of pci_enable_device
  V4L/DVB (5556): Radio-gemtek.c Replace gemtek_ioctl to use video_ioctl2
  V4L/DVB (5555): Radio-aimslab.c Replace rt_ioctl to use video_ioctl2
  V4L/DVB (5554): Fix: vidioc_g_parm were not zeroing the memory
  V4L/DVB (5553): Replace typhoon_do_ioctl to use video_ioctl2
  V4L/DVB (5552): Plan-b: Switch to refcounting PCI API
  V4L/DVB (5551): Plan-b: header change
  V4L/DVB (5550): Radio-sf16fmi.c Replace fmi_do_ioctl to use video_ioctl2
  V4L/DVB (5549): Radio-sf16fmr2.c Replace fmr2_do_ioctl to use video_ioctl2
  V4L/DVB (5548): Fix v4l2 buffer to the length
  V4L/DVB (5547): Add ENUM_FRAMESIZES and ENUM_FRAMEINTERVALS ioctls
  V4L/DVB (5546): Radio-terratec.c Replace tt_do_ioctl to use video_ioctl2
  V4L/DVB (5545): Saa7146: Release capture buffers on device close
  V4L/DVB (5544): Budget-av: Make inversion setting configurable, add KNC ONE V1.0 card
  V4L/DVB (5543): Tda10023: Add support for frontend TDA10023
  V4L/DVB (5542): Budget-av: Remove polarity switching of the clock for DVB-C
  ...
2007-04-27 14:18:45 -07:00
Li Yang a7205b3010 USB: update MAINAINERS and CREDITS for Freescale USB driver
Add MAINAINERS and CREDITS entry for Freescale Highspeed USB device
driver.

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 13:28:43 -07:00
Li Yang d2eef1fc99 USB: update gadget files for fsl_usb2_udc driver
Update gadget_chip.c, ether.c for newly added Freescale Highspeed USB
device driver.

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 13:28:43 -07:00
Li Yang b504882da5 USB: add Freescale high-speed USB SOC device controller driver
Freescale high-speed USB SOC can be found on some Freescale processors
among different architectures.  It supports both host and device functions.
This driver adds its device support for Linux USB Gadget layer.
It is tested on MPC8349 and MPC8313, but should work on other platforms
with minor tweaks.  The driver passed USBCV 1.3 compliance tests.  Note
that this driver doesn't yet include OTG support.

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Jiang Bo <tanya.jiang@freescale.com>
Signed-off-by: Bruce Schmid <duck@freescale.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 13:28:43 -07:00
Raphael Assenat 33f73e5619 USB: quirk for broken suspend of IT8152F/G
Here's a patch which adds my device to the list.

This patch enables the broken suspend quirk for the PCI OHCI controller
present in the IT8152F/G RISC-to-PCI Companion Chip.

Signed-off-by: Raphael Assenat <raph@8d.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 13:28:43 -07:00
Eberhard Fahle 147c5a1733 USB: iowarrior.c: timeouts too small in usb_control_msg calls
The driver uses usb_control_msg() for exchanging data with the device.
When the driver lived freeley _outside_ the kernel tree (pre 2.6.21) the
timeouts for these calls where set to 5*HZ for reading, 1HZ for writing.
(These timeouts seemed to work fine for all users of the driver, at
least nobody complained in the last 2 years.

The current code (2.6.21-rc5) removed the 'HZ' from the timeouts and
left the driver with 5 jiffies for reading and 1 jiffy for writing. My
new machine is fast, but not that fast.

The patch also removes a useless debug statement, which was left over
from testing a broken firmware version

From: Eberhard Fahle <e.fahle@wayoda.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 13:28:43 -07:00
Hans Engelen a03c6facf8 USB: dell device id for option.c
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 13:28:42 -07:00
Phil Dibowitz 862e904377 USB: Remove Huawei unusual_devs entry
Per the Rui Santos and the hardware manufacturers, this actually inhibits
useful parts of the hardware. The correct way to use this hardware is with the
software at http://www.kanoistika.sk/bobovsky/archiv/umts/ and the manufacturers
are also planning on including Linux drivers/material in future revisions.

CC: Rui Santos <rsantos@grupopie.com>
CC: <johann.wilhelm@student.tugraz.at>
CC: <zihan@huawei.com>
CC: <wanganyu1983@huawei.com>
CC: <dingjianjian@huawei.com>
Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 13:28:42 -07:00
Craig Shelley 92f5cae2e8 USB: CP2101 New Device IDs
Two new device IDs for CP2101 driver.

Signed-off-by: Craig Shelley <craig@microtron.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 13:28:42 -07:00
Joey Goncalves 79dcdbf67d USB: add picdem device to ldusb
Hi Greg:

I have found that  /drivers/usb/misc/ldusb.c  works with the "PICDEM Full
Speed USB"
http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=1406&dDocName=en021940


Signed-off-by: Joey S Goncalves <jgoncalves@peragrin.com>
Cc: Michael Hund <MHund@LD-Didactic.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 13:28:42 -07:00
Oliver Neukum 527660a819 usbfs micro optimitation
the memory barrier is needed only with smp.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 13:28:42 -07:00
David Brownell 1b101ceb91 USB: remove ancient/broken CRIS hcd
Remove the old crisv10 HCD ... it can't have built for some time,
doesn't even have a Kconfig entry, was the last driver not to have
been converted to the "hcd" framework, and considering the usbcore
changes since its last patch was merged, has just got to buggy as
all get-out.

I'm told Axis has a new driver, and will be submitting it soon.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Mikael Starvik <mikael.starvik@axis.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 13:28:42 -07:00
Erik Hovland b8d297c93a usb ethernet gadget, workaround network stack API glitch
Another workaround for the glitch in the network layer, whereby one call
ignores the (otherwise kernel-wide) convention that free() calls should
not oops when passed nulls.  This code already handles that API glitch in
most other paths.

From: Erik Hovland <erik@hovland.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 13:28:42 -07:00
Alan Stern 83f7d958ea USB: add "busnum" attribute for USB devices
This patch (as903) adds a "busnum" sysfs attribute for USB devices.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 13:28:42 -07:00
Simon Arlott 6a02c996bc USB: cxacru: ADSL state management
The device has commands to start/stop the ADSL function, so this adds a
sysfs attribute to allow it to be started/stopped/restarted.  It also stops
polling the device for status when the ADSL function is disabled.

There are no problems with sending multiple start or stop commands, even
with a fast loop of them the device still works.  There is no need to
protect the restart process from further user actions while it's waiting
for 1.5s.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Cc: Duncan Sands <duncan.sands@math.u-psud.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 13:28:41 -07:00
Simon Arlott 7d5e1dd40b usbatm: Detect usb device shutdown and ignore failed urbs
Detect usb device shutdown and ignore failed urbs.  This happens when the
driver is unloaded or the device is unplugged.

I'm not sure what other urb statuses should be ignored, and the warning
message doesn't need to be shown when the module is unloaded or the device
is removed.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Cc: Duncan Sands <duncan.sands@math.u-psud.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 13:28:41 -07:00
S.Caglar Onur 5c975acb99 USB: Remove duplicate define of OHCI_QUIRK_ZFMICRO
Remove duplicate define of OHCI_QUIRK_ZFMICRO from ftdi-elan.c, its already
defined in drivers/ush/host/ohci.c

Signed-off-by: "S.Caglar Onur" <caglar@pardus.org.tr>
Cc: <tony.olech@elandigitalsystems.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 13:28:41 -07:00
Leon Leong 3f6e58467c USB: BandRich BandLuxe HSDPA Data Card Driver
Add the detection for the BandRich BandLuxe C100/C100S/C120 HSDPA Data
Card.  With the vendor and product IDs are set properly, the data card can
be detected and works fine.

Signed-off-by: Leon Leong <upleong@bandrich.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 13:28:41 -07:00
Wu, Bryan 178398dca0 USB gadget rndis: fix struct rndis_packet_msg_type unaligned bug
skb_push function may return a pointer which is not aligned as required
by struct rndis_packet_msg_type. Using attribute trick to fix this bug.

Signed-off-by: Roy Huang <roy.huang@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 13:28:40 -07:00
Cyrill Gorcunov 893a342a68 USB Elan FTDI: check for driver registration status
Add checking of driver registration status and release allocated resources
if it failed.

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: "Luiz Fernando N. Capitulino" <lcapitulino@mandriva.com.br>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 13:28:40 -07:00
Greg Kroah-Hartman f094e4f358 USB: sierra: add more checks on shutdown
This should help with any potential NULL pointer usages as reported by a
few users.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 13:28:40 -07:00
David Brownell 931384fb0e USB: add an ohci board-specific quirk
Use the new ohci-pci quirk infrastructure to address the problem it was
created to address: a quirk specific to the Portege 4000, in buzilla as

	http://bugzilla.kernel.org/show_bug.cgi?id=6723

Also fix a misuse of "__devinit" for the quirk functions.  It must not
be used without first ensuring that the references from the quirk tables
are gone, and that the function using those quirk tables is also gone.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 13:28:40 -07:00
David Brownell 296c024292 USB: usbnet reports minidriver name through ethtool
Update "usbnet" so that ethtool reports the name of the minidriver in use
(e.g. asix, cdc_ether, dm9601, rndis_host) instead of "usbnet".  This is a
better match to how other network drivers work, resolving a minor open issue.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 13:28:40 -07:00
David Brownell ddda086240 USB: rndis_host, various cleanups
Cleanups to the rndis_host code, and a tweak that helps talking to
PXA hardware.  Mostly from Ole André Vadla Ravnås <oleavr@gmail.com>

  - Prevent SET_INTERFACE requests, they give PXA hardware bad indigestion
  - For paranoia, null a pointer after freeing its data
  - Wrap up ActiveSync oddities for RNDIS_QUERY in one routine
  - Use that wrapper when getting the Ethernet address
  - Whitespace fixes

Plus add a comment noting the open issues about some RNDIS clients still
needing TBD kinds of browbeating to accept non-jumbogram packets.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 13:28:40 -07:00
David Brownell aa2ce5ca6b USB: <linux/usb/ch9.h> minor doc update
Minor doc update to <linux/usb/ch9.h> ... say where USB_DT_CS_* came
from and update the definitions to match how they're derived there.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 13:28:39 -07:00
Alan Stern 8c9862e512 USB: fix signed jiffies issue in autosuspend logic
This patch (as897) changes the autosuspend timer code to use the
standard types and macros in dealing with jiffies values.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 13:28:39 -07:00
Pete Zaitcev ecb658d387 usbmon: bus zero
Add the "bus zero" feature to the usbmon. If a user process specifies bus
with number zero, it receives events from all buses. This is useful when
we wish to see initial enumeration when a bus is created, typically after
a modprobe. Until now, an application had to loop until a new bus could
be open, then start capturing on it. This procedure was cumbersome and
could lose initial events. Also, often it's too bothersome to find exactly
to which bus a specific device is attached.

Paolo Albeni provided the original concept implementation. I added the
handling of "bus->monitored" flag and generally fixed it up.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 13:28:39 -07:00
Tony Lindgren 35d07fd58f USB: Allow transfer_buffer with transfer_dma
Some host controller drivers may need a PIO fallback when a DMA channel
is temporarily unavailable.  This patch provides an address that such
drivers can use for PIO in those cases, and nulls that field out when
no such address is available (highmem) which should help usbmon.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 13:28:39 -07:00
Oliver Neukum ebc3ac149b USB: cleanup ofd adutux
this driver does
- ignore errors during open
- submit a running urb
- use down_interruptible not handling signals
- GFP_KERNEL with a spinlock held

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 13:28:39 -07:00
Alan Stern 1941044aa9 USB: add "last_busy" field for use in autosuspend
This patch (as877) adds a "last_busy" field to struct usb_device, for
use by the autosuspend framework.  Now if an autosuspend call comes at
a time when the device isn't busy but hasn't yet been idle for long
enough, the timer can be set to exactly the desired value.  And we
will be ready to handle things like HID drivers, which can't maintain
a useful usage count and must rely on the time-of-last-use to decide
when to autosuspend.

The patch also makes some related minor improvements:

	Move the calls to the autosuspend condition-checking routine
	into usb_suspend_both(), which is the only place where it
	really matters.

	If the autosuspend timer is already running, don't stop
	and restart it.

	Replace immediate returns with gotos so that the optional
	debugging ouput won't be bypassed.

	If autoresume is disabled but the device is already awake,
	don't return an error for an autoresume call.

	Don't try to autoresume a device if it isn't suspended.
	(Yes, this undercuts the previous change -- so sue me.)

	Don't duplicate existing code in the autosuspend work routine.

	Fix the kerneldoc in usb_autopm_put_interface(): If an
	autoresume call fails, the usage counter is left unchanged.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 13:28:39 -07:00
Richard Knutsson 38c3cb5b67 USB: whiteheat: Convert to generic boolean
Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Acked-by: Stuart MacDonald <stuartm@connecttech.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 13:28:39 -07:00
Oliver Neukum 5ec1862e7b USB: fix omninet write vs. close race
omninet kills all URBs in close. However write() returns as soon as
the URB has been submitted. Killing the last URB means a race that
can lose that date written in the last call to write().
As a fix this is moved to shutdown().

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 13:28:38 -07:00
Oliver Neukum 2f007de2f4 USB: fix error handling for mct_u232
we report errors to the caller. THis patch adds error handling to the driver.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 13:28:38 -07:00