Граф коммитов

65 Коммитов

Автор SHA1 Сообщение Дата
Marek Vasut 1b9169d8a0 ARM: pxa: Update Balloon3 for new FPGA firmware
The new FPGA firmware in Balloon3 uses different methods to control it's bus
control lines. In the new version, there are separate registers to set/clear
bus control lines. This patch updates affected places.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-20 23:14:02 +08:00
Marek Vasut 851982c1b6 ARM: pxa: Introduce pxa{25x,27x,3xx}_map_io()
This patch introduces pxa2xx_map_io() and pxa3xx_map_io() to distinguish
between PXA25x/PXA27x and PXA3xx memory mapping.

Also, fixup for platforms broken after introducing pxa{25x,27x}_map_io()
and pxa3xx_map_io() is included.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-16 14:31:15 +08:00
Nicolas Pitre 6451d7783b arm: remove machine_desc.io_pg_offst and .phys_io
Since we're now using addruart to establish the debug mapping, we can
remove the io_pg_offst and phys_io members of struct machine_desc.

The various declarations were removed using the following script:

  grep -rl MACHINE_START arch/arm | xargs \
  sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }'

[ Initial patch was from Jeremy Kerr, example script from Russell King ]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Eric Miao <eric.miao at canonical.com>
2010-10-20 00:27:46 -04:00
Marek Vasut b476ef059e ARM: pxa/balloon3: Disperse MFP config
Move pin config to appropriate places and use it only if needed.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-By: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-10-09 17:10:40 +08:00
Haojian Zhuang 6ac6b817f3 ARM: pxa: encode IRQ number into .nr_irqs
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-10-08 16:21:17 +08:00
Marek Vasut 3a27f6e0a1 [ARM] pxa/balloon3: Add MAX1586 PMIC support
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-08-05 14:32:48 +08:00
Marek Vasut e6a8ef5477 [ARM] pxa/balloon3: Add NAND driver
The NAND support is implemented through the gen_nand driver.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-08-05 14:32:47 +08:00
Marek Vasut 02a453e4a5 [ARM] pxa/balloon3: PCF857x GPIO expander and LEDs
Add supported for PCF8574A GPIO expander and LEDs attached to it.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-08-05 14:32:46 +08:00
Marek Vasut a9c0629cde [ARM] pxa/balloon3: PCMCIA Support
This driver adds support for the on-board CF socket.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-08-05 14:32:45 +08:00
Marek Vasut 12a2449c79 [ARM] pxa/balloon3: Machine file cleanup
Modularize components of the Balloon3 board.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-08-05 14:32:44 +08:00
Marek Vasut b0240bf4d4 [ARM] pxa/balloon3: Machine file cleanup
Logically separate parts of the file that are handled by one particular driver.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-08-05 14:32:44 +08:00
Eric Miao c11b6a420b [ARM] pxa: add the missing AC97 pin configurations
Missing AC97 pin configurations are added where pxa_set_ac97_info() are
called for all pxa25x/pxa27x platforms. Where no exact configuration is
provided, use the default as in sound/arm/pxa2xx-ac97-lib.c

Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:48 +08:00
Eric Miao bedbda9717 [ARM] pxa: simplify the LCD pin configuration for pxa27x platforms
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:47 +08:00
Russell King cc155c6f2c [ARM] pxa: allow platforms to control which uarts are registered
For some platforms, it is inappropriate to register all PXA UARTs.
In some cases, the UARTs may not be used, and in others we may want
to avoid registering the UARTs to allow other drivers (eg, FICP) to
make use of the UART.

In addition, a while back there was a request to be able to pass
platform data to the UART driver.

This patch enables all of this by providing functions platforms can
call to register each individual UART.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:02:55 +08:00
Jonathan McDowell 2a23ec3679 [ARM] pxa: balloon3 (http://balloonboard.org/) base machine support
So, again against latest pxa-linux-2.6/devel, with the following
changes:

 * Move to __raw_readl/__raw_writel for FPGA/CPLD register access
 * Change Toppoly LCD config to be selectable at run time rather than
   compile time.
 * Remove currently unused irq device suspend/resume functions.
 * Strip out unnecessary/duplicated #includes.
 * Some code style cleanups.

Balloon3 (http://balloonboard.org/) base machine support

Signed-off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10 18:49:39 +08:00