Fix this compiler warning by allocating a structure to read the eeprom instead
of doing it on the stack and worse: the eeprom array is static, so that can
cause problems if there are multiple cx231xx instances.
cx231xx-cards.c: In function 'cx231xx_card_setup':
cx231xx-cards.c:1110:1: warning: the frame size of 2064 bytes is larger than 2048 bytes [-Wframe-larger-than=]
}
^
I did consider removing the code altogether since the result is actually
not used at the moment, but I decided against it since it is used in other
drivers and someone might want to start using it in this driver as well. And
then it is useful that the code is already there.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Extend detect_cvt/gtf API to indicate the format type (interlaced
or progressive). In case of interlaced, the vertical front and back
porch and vsync values for both (odd,even) fields are considered to
derive image height. Populated vsync, vertical front, back porch
values in bt timing structure for even and odd fields and updated
the flags appropriately.
Also modified the functions calling the detect_cvt/gtf(). As of now
these functions are calling detect_cvt/gtf() with interlaced flag
set to false.
Cc: Martin Bugge <marbugge@cisco.com>
Cc: Mats Randgaard <matrandg@cisco.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Prashant Laddha <prladdha@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The v4l2_print_dv_timings() didn't log the interlaced format correctly. The timings
for the bottom field weren't logged and the fields per second value was half of what
it should have been.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Currently, in gtf hblank calculations, the rounding is used twice,
one at intermediate division and one at final state where hblank
is rounded to nearest multiple of twice cell granularity. This
error got introduced in 'commit d7ed5a3dda ("[media]
v4l2-dv-timings: fix rounding in hblank and hsync calculation"),
where it missed combining the rounding step. Correcting the same
in this patch.
Signed-off-by: Prashant Laddha <prladdha@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Log the alternate gamma state and the HDMI colorspace that the adv
device detected.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The logging of the saturator status was wrong due to an incorrect
condition.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add support for logging the detected InfoFrames for the adv76xx. Helps in
debugging what is actually received on the HDMI link.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The adv7511 sets up InfoFrames that are used when transmitting video.
Log the contents of those InfoFrames so it is possible to see exactly what
the transmitter is sending.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Currently this driver mixes u8/u32 and uint8_t/uint32_t. Standardize on
u8/u32.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Currently this driver mixes u8/u16 and uint8_t/uint16_t. Standardize on
u8/u16.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add support for the missing VIDIOC_CREATE_BUFS and VIDIOC_PREPARE_BUF
ioctls.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This was never added for some reason, so add it now.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
We must return -ENODEV error on case probe() fails to detect chip.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
We must return -ENODEV error on case probe() fails to detect chip.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
We need to set some error codes here.
Fixes: f01919e8f5 ('[media] m88ds3103: add I2C client binding')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
If userspace passed the invalid buffer type 0 to the kernel, then the
kernel log would show 'type=(null)' since there was no string defined
for type 0. Fix this.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This field was never cleared by the kernel making future extensions
hard to implement. Clear it now.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Currently the colors for the Y16 and Y16_BE pixelformats are in the range
0x0000-0xff00. So pure white (0xffff) is never created.
Improve this by making white really white. For other colors the lsb remains 0
so vivid can be used to detect endian problems.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Ricardo Ribalda <ricardo.ribalda@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Since commit 1c6c69525b ("genirq: Reject bogus threaded irq requests")
threaded IRQs without a primary handler need to be requested with
IRQF_ONESHOT, otherwise the request will fail.
So pass the IRQF_ONESHOT flag in this case.
The semantic patch that makes this change is available
in scripts/coccinelle/misc/irqf_oneshot.cocci.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This has been on my TODO list for some time now: the control that enables the video
loopback was part of the controls of the video output device instead of the video
capture device. In practice this was quite annoying since you expect it at the capture
side since that's where you want to make the decision whether to use the TPG or looped
video.
This patch moves the control from the output to the capture side.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The tuner FMD1216ME_MK3 suffers the same problem as FMD1216MEX_MK3,
as described in saa7134-cards.c (disabled IF, enabled DVB-T). The
card does work under MS Windows, after soft reboot into Linux it
continues to work, only then tda9887 is loaded as well.
I copied the relevant code from the BEHOLD_H6 section to MD7134.
The CTX946 TV card doesn't detect a signal after cold boot, seems
Signed-off-by: Juergen Gier <juergen.gier@gmx.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Current v4l2_of_parse_parallel_bus function attempts to parse the
DT properties for the parallel bus as well as BT656 bus.
If the pclk-sample property is defined for the BT656 bus, it is still
marked as a parallel bus.
Fix this by parsing the pclk after the bus_type is selected.
Only when hsync or vsync properties are specified, the bus_type should
be set to V4L2_MBUS_PARALLEL.
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Load PCTV 460e tda10071 demod and a8293 SEC using I2C client bindings.
Remove old unused tda10071 config struct. We are using I2C platform
data now.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Commit 84cb7be43c broke vivid-tpg
(uninitialized variable p).
This patch takes a different approach: four different functions are
created, one for each PRINTSTR version.
In order to avoid the 'the frame size of 1308 bytes is larger than 1024
bytes' warning I had to mark those functions with 'noinline'. For
whatever reason gcc seems to inline this aggressively and it is doing
weird things with the stack.
I tried to read the assembly code, but I couldn't see what exactly it
was doing on the stack.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Simplify cobalt_g/try_fmt_vid_cap by not setting the colorspace fields in
pix again (since v4l2_fill_pix_format does that already), and by using
v4l2_fill_mbus_format in cobalt_s_fmt_vid_out which allows the get_fmt
call to be dropped as well.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add support for the transfer function to the cobalt driver: make sure it is
passed on to/retrieved from the sub-device correctly.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Precalculate all the colorspace/transfer function combinations in order
to easily generate the correct colors.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add support for the transfer function: create a new control for it,
and support it for both capture and output sides.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Make this part of the format check.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Prabhakar Lad <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Still preliminary, but the information is at least there.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
In the past the transfer function was implied by the colorspace. However,
it is an independent entity in its own right. Add support for explicitly
choosing the transfer function.
This change will allow us to represent linear RGB (as is used by openGL), and
it will make it easier to work with decoded video material since most codecs
store the transfer function as a separate property as well.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
There's a dead code on usbvision that makes it harder to read
and produces a smatch warning about bad identation.
Improve the code readability and add a FIXME to warn about
the current hack there.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Smatch reports a warning:
drivers/media/usb/tm6000/tm6000-video.c:646 tm6000_prepare_isoc() error: we previously assumed 'dev->urb_buffer' could be null (see line 624)
This is not really a problem, but it actually shows that the check
if urb_buffer is NULL is being done twice: at the if and at
tm6000_alloc_urb_buffers().
We don't need to do it twice. So, remove the extra check. The code
become cleaner, and, as a collateral effect, smatch becomes happy.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Smatch currently produces two warnings:
drivers/media/pci/ivtv/ivtv-fileops.c:901 ivtv_v4l2_close() warn: suspicious bitop condition
drivers/media/pci/ivtv/ivtv-fileops.c:1026 ivtv_open() warn: suspicious bitop condition
Those are false positives, but it is not hard to get rid of them by
using a different way to evaluate the macro, splitting the logical
boolean evaluation from the bitmap one.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
As reported by smatch:
drivers/media/pci/bt8xx/dst_ca.c:323 ca_get_message() warn: this array is probably non-NULL. 'p_ca_message->msg'
drivers/media/pci/bt8xx/dst_ca.c:498 ca_send_message() warn: this array is probably non-NULL. 'p_ca_message->msg'
Those two checks are needless/useless, as the ca_msg struct is
declared as:
typedef struct ca_msg {
unsigned int index;
unsigned int type;
unsigned int length;
unsigned char msg[256];
} ca_msg_t;
So, if the p_ca_message pointer is not null, msg will also be
not null.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
As reported by smatch:
drivers/media/dvb-frontends/dib0090.c:1710 dib0090_dc_offset_calibration() warn: missing break? reassigning '*tune_state'
There's no need to change tune_state there, as the fall though code
will change it again to another state. So, simplify it by
removing the dead code.
While here, fix a typo:
Sart => Start
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Smatch reports two issues:
drivers/media/platform/sh_vou.c:670 vou_adjust_output() error: buffer overflow 'vou_scale_v_num' 3 <= 4
drivers/media/platform/sh_vou.c:670 vou_adjust_output() error: buffer overflow 'vou_scale_v_den' 3 <= 4
It seems that there's actually a bug here: the same var (idx) is used
as an index for vertical and horizontal scaling arrays. However,
there are 4 elements on the h arrays, and only 3 at the v ones.
On the first loop, it may select index 4 for the horizontal array.
In this case, if the second loop fails to select an index, the
code would keep using 4 for the vertical array, with is past of
the array sizes.
The intent here seems to use index 0, if the scale is not found.
So, use a separate var for the vertical index.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
As reported by smatch:
drivers/media/dvb-frontends/drxk_hard.c:3277 dvbt_sc_command() warn: missing break? reassigning 'status'
This is basically because the error handling logic there was crappy.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil
Prashant Laddha
Hans Verkuil
Antti Palosaari
Dan Carpenter
Fabio Estevam
Fabian Frederick
Juergen Gier
Nikhil Devshatwar
Mauro Carvalho Chehab