WSL2-Linux-Kernel/drivers/message/i2o
Alan Cox 9d793b0bcb i2o: Fix 32/64bit DMA locking
The I2O ioctls assume 32bits.  In itself that is fine as they are old
cards and nobody uses 64bit.  However on LKML it was noted this
assumption is also made for allocated memory and is unsafe on 64bit
systems.

Fixing this is a mess.  It turns out there is tons of crap buried in a
header file that does racy 32/64bit filtering on the masks.

So we:
- Verify all callers of the racy code can sleep (i2o_dma_[re]alloc)
- Move the code into a new i2o/memory.c file
- Remove the gfp_mask argument so nobody can try and misuse the function
- Wrap a mutex around the problem area (a single mutex is easy to do and
  none of this is performance relevant)
- Switch the remaining problem kmalloc holdout to use i2o_dma_alloc

Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Cc: Vasily Averin <vvs@sw.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 11:21:38 -07:00
..
Kconfig
Makefile i2o: Fix 32/64bit DMA locking 2008-10-16 11:21:38 -07:00
README
README.ioctl
bus-osm.c
config-osm.c
core.h
debug.c
device.c i2o: Fix 32/64bit DMA locking 2008-10-16 11:21:38 -07:00
driver.c
exec-osm.c i2o: Fix 32/64bit DMA locking 2008-10-16 11:21:38 -07:00
i2o_block.c Remove duplicated unlikely() in IS_ERR() 2008-04-29 08:06:25 -07:00
i2o_block.h
i2o_config.c i2o: Fix 32/64bit DMA locking 2008-10-16 11:21:38 -07:00
i2o_proc.c drivers: use non-racy method for proc entries creation (2) 2008-04-29 08:06:22 -07:00
i2o_scsi.c [SCSI] replace sizeof sense_buffer with SCSI_SENSE_BUFFERSIZE 2008-01-23 11:29:27 -06:00
iop.c i2o: Fix 32/64bit DMA locking 2008-10-16 11:21:38 -07:00
memory.c i2o: Fix 32/64bit DMA locking 2008-10-16 11:21:38 -07:00
pci.c i2o: Fix 32/64bit DMA locking 2008-10-16 11:21:38 -07:00

README

	Linux I2O Support	(c) Copyright 1999 Red Hat Software
					and others.

	This program is free software; you can redistribute it and/or
	modify it under the terms of the GNU General Public License
	as published by the Free Software Foundation; either version
	2 of the License, or (at your option) any later version.

AUTHORS (so far)

Alan Cox, Building Number Three Ltd.
	Core code, SCSI and Block OSMs

Steve Ralston, LSI Logic Corp.
	Debugging SCSI and Block OSM

Deepak Saxena, Intel Corp.
	Various core/block extensions
	/proc interface, bug fixes
	Ioctl interfaces for control
	Debugging LAN OSM

Philip Rumpf
	Fixed assorted dumb SMP locking bugs

Juha Sievanen, University of Helsinki Finland
	LAN OSM code
	/proc interface to LAN class
	Bug fixes
	Core code extensions

Auvo Häkkinen, University of Helsinki Finland
	LAN OSM code
	/Proc interface to LAN class
	Bug fixes
	Core code extensions

Taneli Vähäkangas, University of Helsinki Finland
	Fixes to i2o_config

CREDITS

	This work was made possible by 

Red Hat Software
	Funding for the Building #3 part of the project

Symbios Logic (Now LSI)
	Host adapters, hints, known to work platforms when I hit
	compatibility problems

BoxHill Corporation
	Loan of initial FibreChannel disk array used for development work.

European Comission
	Funding the work done by the University of Helsinki

SysKonnect
        Loan of FDDI and Gigabit Ethernet cards

ASUSTeK
        Loan of I2O motherboard 

STATUS:

o	The core setup works within limits.
o	The scsi layer seems to almost work. 
           I'm still chasing down the hang bug.
o	The block OSM is mostly functional
o	LAN OSM works with FDDI and Ethernet cards.

TO DO:

General:
o	Provide hidden address space if asked
o	Long term message flow control
o	PCI IOP's without interrupts are not supported yet
o	Push FAIL handling into the core
o	DDM control interfaces for module load etc
o       Add I2O 2.0 support (Deffered to 2.5 kernel)

Block:
o	Multiple major numbers
o	Read ahead and cache handling stuff. Talk to Ingo and people
o	Power management
o	Finish Media changers

SCSI:
o	Find the right way to associate drives/luns/busses

Lan:	
o	Performance tuning
o	Test Fibre Channel code

Tape:
o	Anyone seen anything implementing this ?
           (D.S: Will attempt to do so if spare cycles permit)