WSL2-Linux-Kernel/include/linux/iio
Greg Kroah-Hartman b2e312061c First round of IIO fixes for the 4.14 cycle
Note this includes fixes from recent merge window.  As such the tree
 is based on top of a prior staging/staging-next tree.
 
 * iio core
   - return and error for a failed read_reg debugfs call rather than
     eating the error.
 * ad7192
   - Use the dedicated reset function in the ad_sigma_delta library
     instead of an spi transfer with the data on the stack which
     could cause problems with DMA.
 * ad7793
   - Implement a dedicate reset function in the ad_sigma_delta library
     and use it to correctly reset this part.
 * bme280
   - ctrl_reg write must occur after any register writes
   for updates to take effect.
 * mcp320x
   - negative voltage readout was broken.
   - Fix an oops on module unload due to spi_set_drvdata not being called
     in probe.
 * st_magn
   - Fix the data ready line configuration for the lis3mdl. It is not
     configurable so the st_magn core was assuming it didn't exist
     and so wasn't consuming interrupts resulting in an unhandled
     interrupt.
 * stm32-adc
   - off by one error on max channels checking.
 * stm32-timer
   - preset should not be buffered - reorganising register writes avoids
   this.
   - fix a corner case in which write preset goes wrong when a timer is
   used first as a trigger then as a counter with preset. Odd case but
   you never know.
 * ti-ads1015
   - Fix setting of comparator polarity by fixing bitfield definition.
 * twl4030
   - Error path handling fix to cleanup in event of regulator
     registration failure.
   - Disable the vusb3v1 regulator correctly in error handling
   - Don't paper over a regulator enable failure.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAlnH2PkRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FoiNFw//XKT/CRq7R8Dg5vy4FT7NRw/SpSVH9u8M
 JsIISyAoh0jfOFJFkVv2Ll+Zs+SkbXJOPMUreaFJMnftSCkBdteT9D5kz5cYiUkO
 sFn58YEEqKCqQVJBEi0yM00HMxbpNKiNHXzo9WC8ZiUVRJqSigq1coznSqaZngRd
 yf4a9Z33jiH/NXalqy5Vb4CSn76UWpvvYJ11tuNxXqOldkyU4sm8bvsPWnBg1qG3
 YIuVZs83Rv1HW0t6ktYf3WwC2rBhKEM8st2fUCLkU+4+foDuqQBiFdWJzTcxe6Ru
 8za+q3ngOo7rRkLS8cSTsh8hbfKwIV0e3rQvsN3zqodqjPilw9uH3eybMYzLK/0I
 j9o12jaD1Ow7zQfiQnNnyJqDLddEt+f6GcrI/iYQPlTIQIhqDii4YInDyCrF4xbr
 i/8saOr5n4PsdHRovTUl2rrgiX+Jix6OmNLEtUdp1HWrc0XwbZ5L/1g6pXFL98QZ
 Kq8MwjNu+6x+66Hga/1fll19hZ/VMYGqxFtoP+6S28TS1bO9dXm6XNl5/U5Nh5mN
 J255UFCdFkBmJO9nP7tmbDscMCAbhc6AOHKxjUebuoNnyhyV+20W9S/gpzTIilnO
 Gv9D0z29zITc8Hpfhl2YKC6F00BuRAdPFJo05rSE/KoWX3bkPCiXFTfQ+aPwB72h
 bYT4oJeUoQg=
 =CcjQ
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-4.14a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

First round of IIO fixes for the 4.14 cycle

Note this includes fixes from recent merge window.  As such the tree
is based on top of a prior staging/staging-next tree.

* iio core
  - return and error for a failed read_reg debugfs call rather than
    eating the error.
* ad7192
  - Use the dedicated reset function in the ad_sigma_delta library
    instead of an spi transfer with the data on the stack which
    could cause problems with DMA.
* ad7793
  - Implement a dedicate reset function in the ad_sigma_delta library
    and use it to correctly reset this part.
* bme280
  - ctrl_reg write must occur after any register writes
  for updates to take effect.
* mcp320x
  - negative voltage readout was broken.
  - Fix an oops on module unload due to spi_set_drvdata not being called
    in probe.
* st_magn
  - Fix the data ready line configuration for the lis3mdl. It is not
    configurable so the st_magn core was assuming it didn't exist
    and so wasn't consuming interrupts resulting in an unhandled
    interrupt.
* stm32-adc
  - off by one error on max channels checking.
* stm32-timer
  - preset should not be buffered - reorganising register writes avoids
  this.
  - fix a corner case in which write preset goes wrong when a timer is
  used first as a trigger then as a counter with preset. Odd case but
  you never know.
* ti-ads1015
  - Fix setting of comparator polarity by fixing bitfield definition.
* twl4030
  - Error path handling fix to cleanup in event of regulator
    registration failure.
  - Disable the vusb3v1 regulator correctly in error handling
  - Don't paper over a regulator enable failure.
2017-09-25 10:58:22 +02:00
..
accel
adc iio: ad_sigma_delta: Implement a dedicated reset function 2017-09-24 16:58:21 +01:00
common Merge 4.13-rc5 into staging-next 2017-08-14 13:35:22 -07:00
dac iio: dac: mcp4725: support voltage reference selection 2016-10-23 19:34:23 +01:00
frequency
gyro
imu iio:adis: Add support for manual self-test flag clear 2016-04-16 13:42:43 +01:00
magnetometer iio:ak8975: add mounting matrix support 2016-04-23 22:14:34 +01:00
timer - New Drivers 2017-09-07 13:51:13 -07:00
buffer-dma.h iio: Add generic DMA buffer infrastructure 2015-10-25 13:54:34 +00:00
buffer-dmaengine.h iio: Add a DMAengine framework based buffer 2015-10-25 13:55:32 +00:00
buffer.h iio:buffer.h - split into buffer.h and buffer_impl.h 2017-01-10 19:54:55 +00:00
buffer_impl.h iio:buffer.h - split into buffer.h and buffer_impl.h 2017-01-10 19:54:55 +00:00
configfs.h iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem 2015-12-05 16:25:30 +00:00
consumer.h iio: inkern: api for manipulating ext_info of iio channels 2017-06-03 19:29:26 +09:00
driver.h
events.h iio: Export userspace IIO headers 2015-02-14 17:05:03 +00:00
iio.h PATCH] iio: Fix some documentation warnings 2017-08-20 15:21:46 +01:00
kfifo_buf.h iio:kfifo_buf header include push down. 2017-01-10 19:54:53 +00:00
machine.h
sw_device.h iio: sw-device: Fix config group initialization 2017-03-13 20:42:34 +00:00
sw_trigger.h iio: sw-trigger: Fix config group initialization 2016-08-15 15:39:09 +01:00
sysfs.h include: linux: iio: add IIO_ATTR_{RO, WO, RW} and IIO_DEVICE_ATTR_{RO, WO, RW} macros 2016-10-01 14:43:59 +01:00
trigger.h PATCH] iio: Fix some documentation warnings 2017-08-20 15:21:46 +01:00
trigger_consumer.h
triggered_buffer.h iio: add resource managed triggered buffer init helpers 2016-09-04 15:42:46 +01:00
triggered_event.h iio: Support triggered events 2015-08-27 20:47:09 +01:00
types.h iio:core: add a callback to allow drivers to provide _available attributes 2016-11-13 11:40:25 +00:00