Herbert Valerio Riedel 8f86dda3ed [ARM] Orion: implement power-off method for QNAP TS-109/209 ... Since the PIC is attached to UART1, it doesn't need a kernel device driver of its own; but powering off is something that the kernel should do, so this patch forcefully configures the UART1 for 19200 baud and sends the character that tells the PIC to cut the power. Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org> Cc: Byron Bradley <byron.bbradley@gmail.com> Acked-by: Nicolas Pitre <nico@marvell.com>		2008-01-26 15:04:04 +00:00
..
Kconfig	[ARM] Orion: add support for QNAP TS-109/TS-209	2008-01-26 15:04:03 +00:00
Makefile	[ARM] Orion: add support for QNAP TS-109/TS-209	2008-01-26 15:04:03 +00:00
Makefile.boot	[ARM] basic support for the Marvell Orion SoC family	2008-01-26 15:03:42 +00:00
addr-map.c	[ARM] Orion: MV88F5181 support bits	2008-01-26 15:03:55 +00:00
common.c	[ARM] Orion: I2C support	2008-01-26 15:04:02 +00:00
common.h	[ARM] Orion: common platform setup for Gigabit Ethernet port	2008-01-26 15:03:51 +00:00
db88f5281-setup.c	[ARM] Orion: support for Marvell Orion-2 (88F5281) Development Board	2008-01-26 15:03:52 +00:00
dns323-setup.c	[ARM] Orion: add support for Orion/MV88F5181 based D-Link DNS-323	2008-01-26 15:03:56 +00:00
gpio.c	[ARM] Orion edge GPIO IRQ support	2008-01-26 15:03:48 +00:00
irq.c	[ARM] Orion edge GPIO IRQ support	2008-01-26 15:03:48 +00:00
kurobox_pro-setup.c	[ARM] Orion: Buffalo/Revogear Kurobox Pro support	2008-01-26 15:03:54 +00:00
pci.c	[ARM] Orion: MV88F5181 support bits	2008-01-26 15:03:55 +00:00
rd88f5182-setup.c	[ARM] OrionNAS RD board support	2008-01-26 15:03:53 +00:00
time.c	[ARM] Orion: system timer support	2008-01-26 15:03:49 +00:00
ts209-setup.c	[ARM] Orion: implement power-off method for QNAP TS-109/209	2008-01-26 15:04:04 +00:00