Jarkko Nikula 7193559af4 omap2: McBSP: Remove mux code for OMAP2420 McBSP2 and do cleanups ... This 'legacy' OMAP2420 McBSP2 muxing code is currently broken after recent conversion to new mux code. The omap_mcbsp_request calling this code is usually called after booting whereas the omap_mux_init_signal is __init marked so null pointer dereference would occur. Fix this by removing the muxing code and let the bootloader or board file to do it if necessary. Remove also omap2_mcbsp_ops as there is no use for it. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>		2010-09-27 10:15:25 -07:00
..
include/mach	omap: Use CONFIG_SMP for test_for_ipi and test_for_ltirq	2010-08-16 09:22:04 +03:00
Kconfig	omap4: Add OMAP4 Panda Support	2010-08-02 13:18:05 +03:00
Makefile	Merge branch 'pm-runtime' of ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus	2010-09-23 17:29:36 -07:00
Makefile.boot	[ARM] 3145/1: OMAP 3a/5: Add support for omap24xx	2005-11-10 14:26:51 +00:00
board-2430sdp.c	Merge branch 'devel-map-io' into omap-for-linus	2010-08-04 14:43:45 +03:00
board-3430sdp.c	Merge branch 'devel-map-io' into omap-for-linus	2010-08-04 14:43:45 +03:00
board-3630sdp.c	Merge branch 'devel-map-io' into omap-for-linus	2010-08-04 14:43:45 +03:00
board-4430sdp.c	Merge branch 'devel-map-io' into omap-for-linus	2010-08-04 14:43:45 +03:00
board-am3517evm.c	omap3: introduce omap3_map_io	2010-08-04 14:43:18 +03:00
board-apollon.c	Merge branch 'devel-map-io' into omap-for-linus	2010-08-04 14:43:45 +03:00
board-cm-t35.c	Merge branch 'devel-map-io' into omap-for-linus	2010-08-04 14:43:45 +03:00
board-devkit8000.c	Merge branch 'devel-map-io' into omap-for-linus	2010-08-04 14:43:45 +03:00
board-flash.c	omap3 flash: rename board-sdp-flash.c to be use by other boards	2010-08-02 15:43:29 +03:00
board-generic.c	Merge branch 'devel-map-io' into omap-for-linus	2010-08-04 14:43:45 +03:00
board-h4.c	Merge branch 'devel-map-io' into omap-for-linus	2010-08-04 14:43:45 +03:00
board-igep0020.c	omap3: introduce omap3_map_io	2010-08-04 14:43:18 +03:00
board-ldp.c	Merge branch 'devel-map-io' into omap-for-linus	2010-08-04 14:43:45 +03:00
board-n8x0.c	omap: n8x0: Mux i2s codec port pins for McBSP block	2010-09-23 18:27:47 -07:00
board-omap3beagle.c	Merge branch 'devel-map-io' into omap-for-linus	2010-08-04 14:43:45 +03:00
board-omap3evm.c	Merge branch 'for-linus' of git://gitorious.org/linux-omap-dss2/linux	2010-08-08 10:02:59 -07:00
board-omap3pandora.c	omap: pandora: pass wl1251 information to SDIO core	2010-08-11 08:59:04 -07:00
board-omap3stalker.c	omap3: introduce omap3_map_io	2010-08-04 14:43:18 +03:00
board-omap3touchbook.c	Merge branch 'devel-map-io' into omap-for-linus	2010-08-04 14:43:45 +03:00
board-omap4panda.c	omap2: fix assorted compiler warnings	2010-09-23 18:27:18 -07:00
board-overo.c	Merge branch 'devel-map-io' into omap-for-linus	2010-08-04 14:43:45 +03:00
board-rx51-peripherals.c	Merge branch 'devel-misc' into omap-for-linus	2010-08-02 14:23:38 +03:00
board-rx51-sdram.c	omap3: rx51: Add SDRAM init	2009-11-22 10:24:33 -08:00
board-rx51-video.c	omap: mux: Remove old mux code	2010-07-05 16:31:40 +03:00
board-rx51.c	omap3: Unify omap2_set_globals_3[43,6x]x functions	2010-08-04 14:43:18 +03:00
board-zoom-debugboard.c	omap2/3: Fix DEBUG_LL for omap zoom2/3	2010-05-03 17:53:08 -07:00
board-zoom-peripherals.c	omap3: zoom2/3 / 3630sdp: Don't init always all uarts	2010-03-15 16:34:17 -05:00
board-zoom2.c	Merge branch 'devel-map-io' into omap-for-linus	2010-08-04 14:43:45 +03:00
board-zoom3.c	Merge branch 'devel-map-io' into omap-for-linus	2010-08-04 14:43:45 +03:00
clkt2xxx_apll.c	OMAP2 PRCM: convert OMAP2 PRCM macros to the _SHIFT/_MASK suffixes	2010-05-20 12:31:04 -06:00
clkt2xxx_dpllcore.c	OMAP2xxx clock: move the DPLL+CORE composite clock code into mach-omap2/clkt2xxx_dpllcore.c	2010-01-26 20:13:06 -07:00
clkt2xxx_osc.c	OMAP2xxx clock: move osc_clk code into mach-omap2/clkt2xxx_osc.c	2010-01-28 18:13:49 -07:00
clkt2xxx_sys.c	OMAP2xxx clock: move sys_clk code into mach-omap2/clkt2xxx_sys.c	2010-01-28 18:13:49 -07:00
clkt2xxx_virt_prcm_set.c	OMAP2 clock: fix recursive spinlock attempt when CONFIG_CPU_FREQ=y	2010-05-20 12:31:14 -06:00
clkt34xx_dpll3m2.c	OMAP3/4 clock: split into per-chip family files	2010-02-24 12:16:15 -07:00
clkt_clksel.c	OMAP2+ clock: clean up clkt_clksel.c	2010-05-20 12:31:06 -06:00
clkt_dpll.c	OMAP2/3/4 clock: fix DPLL multiplier value errors; also copyrights, includes, documentation	2010-02-24 12:15:03 -07:00
clock.c	OMAP2+ clock: clean up clkt_clksel.c	2010-05-20 12:31:06 -06:00
clock.h	OMAP2+ clock: clean up clkt_clksel.c	2010-05-20 12:31:06 -06:00
clock2xxx.c	OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code	2010-02-24 17:45:15 -07:00
clock2xxx.h	OMAP2 clock: split OMAP2420, OMAP2430 clock data into their own files	2010-02-24 12:29:42 -07:00
clock3xxx.c	OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code	2010-02-24 17:45:15 -07:00
clock3xxx.h	OMAP3/4 clock: split into per-chip family files	2010-02-24 12:16:15 -07:00
clock3xxx_data.c	omap: crypto: updates to enable omap aes	2010-09-27 10:15:25 -07:00
clock34xx.c	OMAP3/4 clock: split into per-chip family files	2010-02-24 12:16:15 -07:00
clock34xx.h	OMAP3/4 clock: split into per-chip family files	2010-02-24 12:16:15 -07:00
clock36xx.c	OMAP3/4 clock: split into per-chip family files	2010-02-24 12:16:15 -07:00
clock36xx.h	OMAP3/4 clock: split into per-chip family files	2010-02-24 12:16:15 -07:00
clock44xx.h	OMAP3/4 clock: split into per-chip family files	2010-02-24 12:16:15 -07:00
clock44xx_data.c	OMAP4: clock: Fix multi-omap boot with reset un-used clocks	2010-06-16 19:01:33 +03:00
clock2420_data.c	omap: crypto: updates to enable omap aes	2010-09-27 10:15:25 -07:00
clock2430.c	OMAP2 clock: split OMAP2420, OMAP2430 clock data into their own files	2010-02-24 12:29:42 -07:00
clock2430_data.c	omap: crypto: updates to enable omap aes	2010-09-27 10:15:25 -07:00
clock3517.c	OMAP3/4 clock: split into per-chip family files	2010-02-24 12:16:15 -07:00
clock3517.h	OMAP3/4 clock: split into per-chip family files	2010-02-24 12:16:15 -07:00
clock_common_data.c	OMAP3 clock: rename RATE_IN_343X, RATE_IN_3430ES2 to match reality	2010-05-20 12:31:07 -06:00
clockdomain.c	OMAP clockdomain: initialize clockdomain registers when the clockdomain layer starts	2010-09-23 17:14:12 -07:00
clockdomains.h	omap2: Convert ARCH_OMAP24XX to ARCH_OMAP2	2010-02-15 09:27:01 -08:00
clockdomains44xx.h	OMAP4: PRM: Remove MPU internal code name and apply PRCM naming convention	2010-05-20 12:31:11 -06:00
cm-regbits-24xx.h	OMAP2 PRCM: convert OMAP2 PRCM macros to the _SHIFT/_MASK suffixes	2010-05-20 12:31:04 -06:00
cm-regbits-34xx.h	OMAP3 PRCM: convert OMAP3 PRCM macros to the _SHIFT/_MASK suffixes	2010-05-20 12:31:05 -06:00
cm-regbits-44xx.h	OMAP4: PRCM: Define shift macros as n instead of 1 << n	2010-01-29 10:14:22 -07:00
cm.c	OMAP24xx: CM: fix mask used for checking IDLEST status	2010-07-26 16:34:28 -06:00
cm.h	OMAP4: hwmod & CM: Implement the omap4_cm_wait_module_ready function	2010-05-20 12:31:08 -06:00
cm4xxx.c	OMAP4: hwmod & CM: Implement the omap4_cm_wait_module_ready function	2010-05-20 12:31:08 -06:00
cm44xx.h	OMAP4: PRCM: Add offset defines for all CM registers	2010-05-20 12:31:12 -06:00
control.c	OMAP3 PRCM: convert OMAP3 PRCM macros to the _SHIFT/_MASK suffixes	2010-05-20 12:31:05 -06:00
cpuidle34xx.c	OMAP3: PM: move device-specific special cases from PM core into CPUidle	2010-09-23 17:13:50 -07:00
devices.c	omap: crypto: updates to enable omap aes	2010-09-27 10:15:25 -07:00
dpll3xxx.c	fix typos concerning "hierarchy"	2010-06-16 18:03:14 +02:00
emu.c	omap2/3: Fix initcalls for multi-omap	2010-02-15 09:27:05 -08:00
gpmc-nand.c	omap3 nand: cleanup virtual address usages	2010-08-02 15:30:38 +03:00
gpmc-onenand.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
gpmc-smc91x.c	omap: use smc91x_platdata to setup smc91x	2009-12-11 16:16:33 -08:00
gpmc.c	omap3 nand: cleanup virtual address usages	2010-08-02 15:30:38 +03:00
hsmmc.c	omap: pandora: pass wl1251 information to SDIO core	2010-08-11 08:59:04 -07:00
hsmmc.h	omap: pandora: pass wl1251 information to SDIO core	2010-08-11 08:59:04 -07:00
i2c.c	omap: mux: Convert 2420 platform init code to use new mux code	2010-07-05 16:31:40 +03:00
id.c	omap3: id: fix 3630 rev detection	2010-08-16 09:21:19 +03:00
io.c	OMAP4: hwmod: Add initial data for OMAP4430 ES1 & ES2	2010-09-23 17:14:15 -07:00
iommu2.c	omap iommu: move iommu_disable at fault to the above layer	2010-06-29 07:55:07 +03:00
irq.c	OMAP2/3: IRQ: ensure valid base address	2010-02-03 08:48:06 -08:00
mailbox.c	omap: mailbox: reorganize headers	2010-08-04 15:50:20 +03:00
mcbsp.c	omap2: McBSP: Remove mux code for OMAP2420 McBSP2 and do cleanups	2010-09-27 10:15:25 -07:00
mux.c	omap2: fix assorted compiler warnings	2010-09-23 18:27:18 -07:00
mux.h	omap: mux: Add data for 2430	2010-07-05 16:31:36 +03:00
mux34xx.c	omap: mux: Remove unncessary parens from mux34xx.c	2010-07-05 16:31:36 +03:00
mux34xx.h	omap: mux: Add 36xx CBP package support	2009-12-11 16:16:33 -08:00
mux2420.c	omap: mux: Add data for 2420	2010-07-05 16:31:36 +03:00
mux2420.h	omap: mux: Add data for 2420	2010-07-05 16:31:36 +03:00
mux2430.c	omap: mux: Add data for 2430	2010-07-05 16:31:36 +03:00
mux2430.h	omap: mux: Add data for 2430	2010-07-05 16:31:36 +03:00
omap-headsmp.S	omap4: Add smc API to read AuxCoreBoot0 register	2010-08-02 13:18:18 +03:00
omap-hotplug.c	omap4: hotplug: Add basic CPU hotplug support	2010-08-02 13:18:19 +03:00
omap-iommu.c	omap iommu: update ducati mmu irq define name	2010-06-29 07:55:08 +03:00
omap-smp.c	omap: Fix sev instruction usage for multi-omap	2010-08-16 09:22:04 +03:00
omap4-common.c	omap4: Move SOC specific code from board file	2010-05-20 11:17:51 -07:00
omap44xx-smc.S	omap4: Add smc API to read AuxCoreBoot0 register	2010-08-02 13:18:18 +03:00
omap_hwmod.c	OMAP: hwmod: improve documentation, clean up function names	2010-09-22 09:19:55 -06:00
omap_hwmod_3xxx_data.c	OMAP3: hwmod data: add data for OMAP3 IVA2	2010-07-26 16:34:32 -06:00
omap_hwmod_44xx_data.c	OMAP4: hwmod: Add initial data for OMAP4430 ES1 & ES2	2010-09-23 17:14:15 -07:00
omap_hwmod_2420_data.c	OMAP2: hwmod data: add IVA1 (2420), IVA2 (2430) hwmods	2010-07-26 16:34:33 -06:00
omap_hwmod_2430_data.c	OMAP2: hwmod data: add IVA1 (2420), IVA2 (2430) hwmods	2010-07-26 16:34:33 -06:00
omap_hwmod_common_data.c	OMAP: hwmod data: add class for IVA hwmods	2010-07-26 16:34:31 -06:00
omap_hwmod_common_data.h	OMAP: hwmod data: add class for IVA hwmods	2010-07-26 16:34:31 -06:00
opp2xxx.h	omap2/3: Multiboot compile fixes to compile in omap2 and omap3	2010-02-15 09:26:55 -08:00
opp2420_data.c	OMAP2xxx OPP: clean up comments in OPP data	2010-01-08 15:23:15 -07:00
opp2430_data.c	OMAP2xxx OPP: clean up comments in OPP data	2010-01-08 15:23:15 -07:00
pm-debug.c	omap: pm-debug: Enable wakeup_timer_milliseconds debugfs entry	2010-09-23 17:14:10 -07:00
pm.c	OMAP4: pm: Change l3_main to l3_main_1 during bus device init	2010-09-23 17:14:16 -07:00
pm.h	omap: pm: Move set_pwrdm_state routine to common pm.c	2010-09-23 17:14:11 -07:00
pm24xx.c	omap: mux: Remove old mux code	2010-07-05 16:31:40 +03:00
pm34xx.c	OMAP clockdomain: initialize clockdomain registers when the clockdomain layer starts	2010-09-23 17:14:12 -07:00
pm44xx.c	omap4: suspend: Add basic system suspend support	2010-08-02 13:18:18 +03:00
pm_bus.c	OMAP2+: PM: initial runtime PM core support	2010-09-21 11:51:23 -07:00
powerdomain.c	OMAP2: powerdomain: Add break in switch statement	2010-08-03 10:21:07 +03:00
powerdomains.h	OMAP2+ powerdomains/clockdomains: prepare for multi-OMAP configs	2010-01-29 10:14:23 -07:00
powerdomains24xx.h	omap2: Convert ARCH_OMAP24XX to ARCH_OMAP2	2010-02-15 09:27:01 -08:00
powerdomains34xx.h	omap: 3630: disable TLL SAR on 3630 ES1	2010-08-04 14:43:52 +03:00
powerdomains44xx.h	OMAP4 powerdomain: Support LOWPOWERSTATECHANGE for powerdomains	2010-05-20 12:31:13 -06:00
prcm-common.h	OMAP4: PRCM: Remove duplicate definition of base addresses	2010-05-20 12:31:12 -06:00
prcm.c	OMAP4: prcm: Add temporarily helper functions for rmw and read inside the PRM	2010-09-21 15:11:42 -06:00
prm-regbits-24xx.h	OMAP2 PRCM: convert OMAP2 PRCM macros to the _SHIFT/_MASK suffixes	2010-05-20 12:31:04 -06:00
prm-regbits-34xx.h	OMAP3 PRCM: convert OMAP3 PRCM macros to the _SHIFT/_MASK suffixes	2010-05-20 12:31:05 -06:00
prm-regbits-44xx.h	OMAP4: PRCM: Define shift macros as n instead of 1 << n	2010-01-29 10:14:22 -07:00
prm.h	OMAP2/3: PRM: add module hard reset support	2010-09-21 15:12:40 -06:00
prm2xxx_3xxx.c	OMAP2/3: PRM: add module hard reset support	2010-09-21 15:12:40 -06:00
prm44xx.c	OMAP4: PRM: add module hard reset support	2010-09-21 15:12:21 -06:00
prm44xx.h	OMAP4: PRCM: Add offset defines for all PRM registers	2010-05-20 12:31:12 -06:00
sdram-hynix-h8mbx00u0mer-0em.h	omap3: zoom: Introduce zoom3 board support	2009-11-22 10:24:33 -08:00
sdram-micron-mt46h32m32lf-6.h	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
sdram-numonyx-m65kxxxxam.h	omap3: SDRC: add timing data for Numonyx M65KxxxxAM	2010-02-17 17:23:20 -08:00
sdram-qimonda-hyb18m512160af-6.h	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
sdrc.c	omap2/3/4: ioremap omap_globals module	2010-02-23 10:57:40 -08:00
sdrc.h	OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx*	2009-12-11 16:16:00 -07:00
sdrc2xxx.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
serial.c	omap2/3/4: serial: errata i202: fix for MDR1 access	2010-08-02 13:18:12 +03:00
sleep24xx.S	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
sleep34xx.S	fix typos concerning "acquire"	2010-06-16 18:03:15 +02:00
sram34xx.S	OMAP3: SDRC: Place SDRC AC timing and MR changes in CORE DVFS SRAM code behind Kconfig	2009-12-11 17:00:42 -07:00
sram242x.S	omap: Split OMAP2_IO_ADDRESS to L3 and L4	2009-10-19 15:25:31 -07:00
sram243x.S	omap: Split OMAP2_IO_ADDRESS to L3 and L4	2009-10-19 15:25:31 -07:00
timer-gp.c	OMAP4: clock: Remove clock hacks from timer-gp.c	2010-02-24 17:45:17 -07:00
timer-mpu.c	omap4: Use irq line defines from irq-44xx.h	2010-02-23 15:29:08 -08:00
usb-ehci.c	omap: mux: Remove old mux code	2010-07-05 16:31:40 +03:00
usb-fs.c	omap: mux: Make omap2 FS USB code use new mux functions	2010-07-05 16:31:38 +03:00
usb-musb.c	omap: mux: Remove old mux code	2010-07-05 16:31:40 +03:00
usb-tusb6010.c	omap: mux: Convert 2420 platform init code to use new mux code	2010-07-05 16:31:40 +03:00