407 строки
13 KiB
C
407 строки
13 KiB
C
/*
|
|
* include/linux/phy.h
|
|
*
|
|
* Framework and drivers for configuring and reading different PHYs
|
|
* Based on code in sungem_phy.c and gianfar_phy.c
|
|
*
|
|
* Author: Andy Fleming
|
|
*
|
|
* Copyright (c) 2004 Freescale Semiconductor, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
|
|
#ifndef __PHY_H
|
|
#define __PHY_H
|
|
|
|
#include <linux/spinlock.h>
|
|
#include <linux/device.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/workqueue.h>
|
|
|
|
#include <asm/atomic.h>
|
|
|
|
#define PHY_BASIC_FEATURES (SUPPORTED_10baseT_Half | \
|
|
SUPPORTED_10baseT_Full | \
|
|
SUPPORTED_100baseT_Half | \
|
|
SUPPORTED_100baseT_Full | \
|
|
SUPPORTED_Autoneg | \
|
|
SUPPORTED_TP | \
|
|
SUPPORTED_MII)
|
|
|
|
#define PHY_GBIT_FEATURES (PHY_BASIC_FEATURES | \
|
|
SUPPORTED_1000baseT_Half | \
|
|
SUPPORTED_1000baseT_Full)
|
|
|
|
/* Set phydev->irq to PHY_POLL if interrupts are not supported,
|
|
* or not desired for this PHY. Set to PHY_IGNORE_INTERRUPT if
|
|
* the attached driver handles the interrupt
|
|
*/
|
|
#define PHY_POLL -1
|
|
#define PHY_IGNORE_INTERRUPT -2
|
|
|
|
#define PHY_HAS_INTERRUPT 0x00000001
|
|
#define PHY_HAS_MAGICANEG 0x00000002
|
|
|
|
/* Interface Mode definitions */
|
|
typedef enum {
|
|
PHY_INTERFACE_MODE_MII,
|
|
PHY_INTERFACE_MODE_GMII,
|
|
PHY_INTERFACE_MODE_SGMII,
|
|
PHY_INTERFACE_MODE_TBI,
|
|
PHY_INTERFACE_MODE_RMII,
|
|
PHY_INTERFACE_MODE_RGMII,
|
|
PHY_INTERFACE_MODE_RGMII_ID,
|
|
PHY_INTERFACE_MODE_RTBI
|
|
} phy_interface_t;
|
|
|
|
#define MII_BUS_MAX 4
|
|
|
|
|
|
#define PHY_INIT_TIMEOUT 100000
|
|
#define PHY_STATE_TIME 1
|
|
#define PHY_FORCE_TIMEOUT 10
|
|
#define PHY_AN_TIMEOUT 10
|
|
|
|
#define PHY_MAX_ADDR 32
|
|
|
|
/* Used when trying to connect to a specific phy (mii bus id:phy device id) */
|
|
#define PHY_ID_FMT "%x:%02x"
|
|
|
|
/* The Bus class for PHYs. Devices which provide access to
|
|
* PHYs should register using this structure */
|
|
struct mii_bus {
|
|
const char *name;
|
|
int id;
|
|
void *priv;
|
|
int (*read)(struct mii_bus *bus, int phy_id, int regnum);
|
|
int (*write)(struct mii_bus *bus, int phy_id, int regnum, u16 val);
|
|
int (*reset)(struct mii_bus *bus);
|
|
|
|
/* A lock to ensure that only one thing can read/write
|
|
* the MDIO bus at a time */
|
|
spinlock_t mdio_lock;
|
|
|
|
struct device *dev;
|
|
|
|
/* list of all PHYs on bus */
|
|
struct phy_device *phy_map[PHY_MAX_ADDR];
|
|
|
|
/* Phy addresses to be ignored when probing */
|
|
u32 phy_mask;
|
|
|
|
/* Pointer to an array of interrupts, each PHY's
|
|
* interrupt at the index matching its address */
|
|
int *irq;
|
|
};
|
|
|
|
#define PHY_INTERRUPT_DISABLED 0x0
|
|
#define PHY_INTERRUPT_ENABLED 0x80000000
|
|
|
|
/* PHY state machine states:
|
|
*
|
|
* DOWN: PHY device and driver are not ready for anything. probe
|
|
* should be called if and only if the PHY is in this state,
|
|
* given that the PHY device exists.
|
|
* - PHY driver probe function will, depending on the PHY, set
|
|
* the state to STARTING or READY
|
|
*
|
|
* STARTING: PHY device is coming up, and the ethernet driver is
|
|
* not ready. PHY drivers may set this in the probe function.
|
|
* If they do, they are responsible for making sure the state is
|
|
* eventually set to indicate whether the PHY is UP or READY,
|
|
* depending on the state when the PHY is done starting up.
|
|
* - PHY driver will set the state to READY
|
|
* - start will set the state to PENDING
|
|
*
|
|
* READY: PHY is ready to send and receive packets, but the
|
|
* controller is not. By default, PHYs which do not implement
|
|
* probe will be set to this state by phy_probe(). If the PHY
|
|
* driver knows the PHY is ready, and the PHY state is STARTING,
|
|
* then it sets this STATE.
|
|
* - start will set the state to UP
|
|
*
|
|
* PENDING: PHY device is coming up, but the ethernet driver is
|
|
* ready. phy_start will set this state if the PHY state is
|
|
* STARTING.
|
|
* - PHY driver will set the state to UP when the PHY is ready
|
|
*
|
|
* UP: The PHY and attached device are ready to do work.
|
|
* Interrupts should be started here.
|
|
* - timer moves to AN
|
|
*
|
|
* AN: The PHY is currently negotiating the link state. Link is
|
|
* therefore down for now. phy_timer will set this state when it
|
|
* detects the state is UP. config_aneg will set this state
|
|
* whenever called with phydev->autoneg set to AUTONEG_ENABLE.
|
|
* - If autonegotiation finishes, but there's no link, it sets
|
|
* the state to NOLINK.
|
|
* - If aneg finishes with link, it sets the state to RUNNING,
|
|
* and calls adjust_link
|
|
* - If autonegotiation did not finish after an arbitrary amount
|
|
* of time, autonegotiation should be tried again if the PHY
|
|
* supports "magic" autonegotiation (back to AN)
|
|
* - If it didn't finish, and no magic_aneg, move to FORCING.
|
|
*
|
|
* NOLINK: PHY is up, but not currently plugged in.
|
|
* - If the timer notes that the link comes back, we move to RUNNING
|
|
* - config_aneg moves to AN
|
|
* - phy_stop moves to HALTED
|
|
*
|
|
* FORCING: PHY is being configured with forced settings
|
|
* - if link is up, move to RUNNING
|
|
* - If link is down, we drop to the next highest setting, and
|
|
* retry (FORCING) after a timeout
|
|
* - phy_stop moves to HALTED
|
|
*
|
|
* RUNNING: PHY is currently up, running, and possibly sending
|
|
* and/or receiving packets
|
|
* - timer will set CHANGELINK if we're polling (this ensures the
|
|
* link state is polled every other cycle of this state machine,
|
|
* which makes it every other second)
|
|
* - irq will set CHANGELINK
|
|
* - config_aneg will set AN
|
|
* - phy_stop moves to HALTED
|
|
*
|
|
* CHANGELINK: PHY experienced a change in link state
|
|
* - timer moves to RUNNING if link
|
|
* - timer moves to NOLINK if the link is down
|
|
* - phy_stop moves to HALTED
|
|
*
|
|
* HALTED: PHY is up, but no polling or interrupts are done. Or
|
|
* PHY is in an error state.
|
|
*
|
|
* - phy_start moves to RESUMING
|
|
*
|
|
* RESUMING: PHY was halted, but now wants to run again.
|
|
* - If we are forcing, or aneg is done, timer moves to RUNNING
|
|
* - If aneg is not done, timer moves to AN
|
|
* - phy_stop moves to HALTED
|
|
*/
|
|
enum phy_state {
|
|
PHY_DOWN=0,
|
|
PHY_STARTING,
|
|
PHY_READY,
|
|
PHY_PENDING,
|
|
PHY_UP,
|
|
PHY_AN,
|
|
PHY_RUNNING,
|
|
PHY_NOLINK,
|
|
PHY_FORCING,
|
|
PHY_CHANGELINK,
|
|
PHY_HALTED,
|
|
PHY_RESUMING
|
|
};
|
|
|
|
/* phy_device: An instance of a PHY
|
|
*
|
|
* drv: Pointer to the driver for this PHY instance
|
|
* bus: Pointer to the bus this PHY is on
|
|
* dev: driver model device structure for this PHY
|
|
* phy_id: UID for this device found during discovery
|
|
* state: state of the PHY for management purposes
|
|
* dev_flags: Device-specific flags used by the PHY driver.
|
|
* addr: Bus address of PHY
|
|
* link_timeout: The number of timer firings to wait before the
|
|
* giving up on the current attempt at acquiring a link
|
|
* irq: IRQ number of the PHY's interrupt (-1 if none)
|
|
* phy_timer: The timer for handling the state machine
|
|
* phy_queue: A work_queue for the interrupt
|
|
* attached_dev: The attached enet driver's device instance ptr
|
|
* adjust_link: Callback for the enet controller to respond to
|
|
* changes in the link state.
|
|
* adjust_state: Callback for the enet driver to respond to
|
|
* changes in the state machine.
|
|
*
|
|
* speed, duplex, pause, supported, advertising, and
|
|
* autoneg are used like in mii_if_info
|
|
*
|
|
* interrupts currently only supports enabled or disabled,
|
|
* but could be changed in the future to support enabling
|
|
* and disabling specific interrupts
|
|
*
|
|
* Contains some infrastructure for polling and interrupt
|
|
* handling, as well as handling shifts in PHY hardware state
|
|
*/
|
|
struct phy_device {
|
|
/* Information about the PHY type */
|
|
/* And management functions */
|
|
struct phy_driver *drv;
|
|
|
|
struct mii_bus *bus;
|
|
|
|
struct device dev;
|
|
|
|
u32 phy_id;
|
|
|
|
enum phy_state state;
|
|
|
|
u32 dev_flags;
|
|
|
|
phy_interface_t interface;
|
|
|
|
/* Bus address of the PHY (0-32) */
|
|
int addr;
|
|
|
|
/* forced speed & duplex (no autoneg)
|
|
* partner speed & duplex & pause (autoneg)
|
|
*/
|
|
int speed;
|
|
int duplex;
|
|
int pause;
|
|
int asym_pause;
|
|
|
|
/* The most recently read link state */
|
|
int link;
|
|
|
|
/* Enabled Interrupts */
|
|
u32 interrupts;
|
|
|
|
/* Union of PHY and Attached devices' supported modes */
|
|
/* See mii.h for more info */
|
|
u32 supported;
|
|
u32 advertising;
|
|
|
|
int autoneg;
|
|
|
|
int link_timeout;
|
|
|
|
/* Interrupt number for this PHY
|
|
* -1 means no interrupt */
|
|
int irq;
|
|
|
|
/* private data pointer */
|
|
/* For use by PHYs to maintain extra state */
|
|
void *priv;
|
|
|
|
/* Interrupt and Polling infrastructure */
|
|
struct work_struct phy_queue;
|
|
struct timer_list phy_timer;
|
|
atomic_t irq_disable;
|
|
|
|
spinlock_t lock;
|
|
|
|
struct net_device *attached_dev;
|
|
|
|
void (*adjust_link)(struct net_device *dev);
|
|
|
|
void (*adjust_state)(struct net_device *dev);
|
|
};
|
|
#define to_phy_device(d) container_of(d, struct phy_device, dev)
|
|
|
|
/* struct phy_driver: Driver structure for a particular PHY type
|
|
*
|
|
* phy_id: The result of reading the UID registers of this PHY
|
|
* type, and ANDing them with the phy_id_mask. This driver
|
|
* only works for PHYs with IDs which match this field
|
|
* name: The friendly name of this PHY type
|
|
* phy_id_mask: Defines the important bits of the phy_id
|
|
* features: A list of features (speed, duplex, etc) supported
|
|
* by this PHY
|
|
* flags: A bitfield defining certain other features this PHY
|
|
* supports (like interrupts)
|
|
*
|
|
* The drivers must implement config_aneg and read_status. All
|
|
* other functions are optional. Note that none of these
|
|
* functions should be called from interrupt time. The goal is
|
|
* for the bus read/write functions to be able to block when the
|
|
* bus transaction is happening, and be freed up by an interrupt
|
|
* (The MPC85xx has this ability, though it is not currently
|
|
* supported in the driver).
|
|
*/
|
|
struct phy_driver {
|
|
u32 phy_id;
|
|
char *name;
|
|
unsigned int phy_id_mask;
|
|
u32 features;
|
|
u32 flags;
|
|
|
|
/* Called to initialize the PHY,
|
|
* including after a reset */
|
|
int (*config_init)(struct phy_device *phydev);
|
|
|
|
/* Called during discovery. Used to set
|
|
* up device-specific structures, if any */
|
|
int (*probe)(struct phy_device *phydev);
|
|
|
|
/* PHY Power Management */
|
|
int (*suspend)(struct phy_device *phydev);
|
|
int (*resume)(struct phy_device *phydev);
|
|
|
|
/* Configures the advertisement and resets
|
|
* autonegotiation if phydev->autoneg is on,
|
|
* forces the speed to the current settings in phydev
|
|
* if phydev->autoneg is off */
|
|
int (*config_aneg)(struct phy_device *phydev);
|
|
|
|
/* Determines the negotiated speed and duplex */
|
|
int (*read_status)(struct phy_device *phydev);
|
|
|
|
/* Clears any pending interrupts */
|
|
int (*ack_interrupt)(struct phy_device *phydev);
|
|
|
|
/* Enables or disables interrupts */
|
|
int (*config_intr)(struct phy_device *phydev);
|
|
|
|
/* Clears up any memory if needed */
|
|
void (*remove)(struct phy_device *phydev);
|
|
|
|
struct device_driver driver;
|
|
};
|
|
#define to_phy_driver(d) container_of(d, struct phy_driver, driver)
|
|
|
|
int phy_read(struct phy_device *phydev, u16 regnum);
|
|
int phy_write(struct phy_device *phydev, u16 regnum, u16 val);
|
|
struct phy_device* get_phy_device(struct mii_bus *bus, int addr);
|
|
int phy_clear_interrupt(struct phy_device *phydev);
|
|
int phy_config_interrupt(struct phy_device *phydev, u32 interrupts);
|
|
struct phy_device * phy_attach(struct net_device *dev,
|
|
const char *phy_id, u32 flags, phy_interface_t interface);
|
|
struct phy_device * phy_connect(struct net_device *dev, const char *phy_id,
|
|
void (*handler)(struct net_device *), u32 flags,
|
|
phy_interface_t interface);
|
|
void phy_disconnect(struct phy_device *phydev);
|
|
void phy_detach(struct phy_device *phydev);
|
|
void phy_start(struct phy_device *phydev);
|
|
void phy_stop(struct phy_device *phydev);
|
|
int phy_start_aneg(struct phy_device *phydev);
|
|
|
|
int mdiobus_register(struct mii_bus *bus);
|
|
void mdiobus_unregister(struct mii_bus *bus);
|
|
void phy_sanitize_settings(struct phy_device *phydev);
|
|
int phy_stop_interrupts(struct phy_device *phydev);
|
|
|
|
static inline int phy_read_status(struct phy_device *phydev) {
|
|
return phydev->drv->read_status(phydev);
|
|
}
|
|
|
|
int genphy_config_advert(struct phy_device *phydev);
|
|
int genphy_setup_forced(struct phy_device *phydev);
|
|
int genphy_restart_aneg(struct phy_device *phydev);
|
|
int genphy_config_aneg(struct phy_device *phydev);
|
|
int genphy_update_link(struct phy_device *phydev);
|
|
int genphy_read_status(struct phy_device *phydev);
|
|
void phy_driver_unregister(struct phy_driver *drv);
|
|
int phy_driver_register(struct phy_driver *new_driver);
|
|
void phy_prepare_link(struct phy_device *phydev,
|
|
void (*adjust_link)(struct net_device *));
|
|
void phy_start_machine(struct phy_device *phydev,
|
|
void (*handler)(struct net_device *));
|
|
void phy_stop_machine(struct phy_device *phydev);
|
|
int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
|
|
int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
|
|
int phy_mii_ioctl(struct phy_device *phydev,
|
|
struct mii_ioctl_data *mii_data, int cmd);
|
|
int phy_start_interrupts(struct phy_device *phydev);
|
|
void phy_print_status(struct phy_device *phydev);
|
|
struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id);
|
|
|
|
extern struct bus_type mdio_bus_type;
|
|
#endif /* __PHY_H */
|