..
c_can
can: c_can: Fix default pinmux glitch at init
2015-07-12 20:57:42 +02:00
cc770
can: cc770: don't touch skb after netif_rx()
2015-07-15 09:04:27 +02:00
m_can
can: m_cam: m_can_fifo_write(): remove return from void function
2015-03-22 23:50:11 +01:00
mscan
can: constify of_device_id array
2015-03-17 15:00:23 -04:00
sja1000
can: sja1000: don't touch skb after netif_rx()
2015-07-15 09:04:28 +02:00
softing
can: move can_stats.bus_off++ from can_bus_off into can_change_state
2015-01-20 13:56:53 +01:00
spi
can: mcp251x: use correct register address for acceptance filters
2015-06-09 09:39:17 +02:00
usb
can: pcan_usb: don't touch skb after netif_rx()
2015-07-15 09:04:28 +02:00
Kconfig
can: CAN_GRCAN should depend on HAS_DMA
2015-04-23 14:09:58 -04:00
Makefile
can: Enable -D__CHECK_ENDIAN__ for sparse by default
2014-12-07 21:22:06 +01:00
at91_can.c
can: at91_can: don't touch skb after netif_receive_skb()/netif_rx()
2015-07-15 09:04:26 +02:00
bfin_can.c
can: bfin_can: don't touch skb after netif_rx()
2015-07-15 09:04:27 +02:00
dev.c
can: replace timestamp as unique skb attribute
2015-07-12 21:13:22 +02:00
flexcan.c
can: flexcan: don't touch skb after netif_receive_skb()
2015-07-15 09:04:27 +02:00
grcan.c
can: grcan: don't touch skb after netif_rx()
2015-07-15 09:04:27 +02:00
janz-ican3.c
can: janz-ican3: add support for CAL/CANopen firmware
2015-05-06 08:03:20 +02:00
led.c
can: add combined rx/tx LED trigger support
2015-03-22 23:50:11 +01:00
pch_can.c
can: move can_stats.bus_off++ from can_bus_off into can_change_state
2015-01-20 13:56:53 +01:00
rcar_can.c
can: rcar_can: unify error messages
2015-07-12 20:57:41 +02:00
slcan.c
can: slcan: don't touch skb after netif_rx_ni()
2015-07-15 09:04:27 +02:00
ti_hecc.c
can: ti_heccn: don't touch skb after netif_rx()
2015-07-15 09:04:27 +02:00
vcan.c
can: replace timestamp as unique skb attribute
2015-07-12 21:13:22 +02:00
xilinx_can.c
net: can: xilinx_can: fix extended frame handling
2015-05-01 10:11:46 +02:00