Stefan Popa e9517dffd1 iio: adc: ad7768-1: Add support for setting the sampling frequency ... The AD7768-1 core ADC receives a master clock signal (MCLK). The MCLK frequency combined with the MCLK division and the digital filter decimation rates, determines the sampling frequency. Along with MCLK_DIV, the power mode is also configured according to datasheet recommendations. From user space, available sampling frequencies can be read. However, it is not required for an exact value to be entered, since the driver will look for the closest available match. When the device configuration changes (for example, if the filter decimation rate changes), a SYNC_IN pulse is required. Signed-off-by: Stefan Popa <stefan.popa@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>		2019-02-09 18:46:01 +00:00
..
accel	iio: st_accel: use ACPI orientation data	2019-02-02 09:28:51 +00:00
adc	iio: adc: ad7768-1: Add support for setting the sampling frequency	2019-02-09 18:46:01 +00:00
afe	iio: afe: rescale: new driver	2018-04-28 18:03:22 +01:00
amplifiers	drivers: iio: Update MODULE AUTHOR email address	2018-08-19 17:23:39 +01:00
buffer	iio:kfifo_buf: check for uint overflow	2018-03-30 11:16:12 +01:00
chemical	iio: chemical: sps30: remove printk format specifier	2019-02-02 17:08:06 +00:00
common	iio: hid-sensor-hub: clean up indentation, remove extraneous tab	2018-11-25 14:03:59 +00:00
counter	iio: 104-quad-8: Provide defines for magic numbers	2018-06-10 11:52:30 +01:00
dac	drivers: iio: dac: Fix wrong license for ADI drivers	2019-02-09 18:46:01 +00:00
dummy	iio:dummy: Add extra paragraphs on Kconfig	2018-03-03 15:20:16 +00:00
frequency	iio: ad9523: fix a missing check of return value	2019-01-05 16:10:50 +00:00
gyro	iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers	2018-11-16 11:42:12 +00:00
health	iio: health: max30102: Mark expected switch fall-throughs	2018-08-19 17:21:35 +01:00
humidity	iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers	2018-11-16 11:42:12 +00:00
imu	iio:bmi160: use if (ret) instead of if (ret < 0)	2019-02-09 15:25:25 +00:00
light	iio: light: add driver for MAX44009	2019-02-02 15:47:46 +00:00
magnetometer	iio: magnetometer: mag3110: add vdd/vddio regulator operation support	2019-01-12 19:00:23 +00:00
multiplexer	iio: multiplexer: switch to SPDX license identifier	2018-08-20 19:28:26 +01:00
orientation	iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers	2018-11-16 11:42:12 +00:00
potentiometer	iio: potentiometer: Add driver for Microchip MCP41xxx/42xxx	2018-11-25 12:35:26 +00:00
potentiostat	iio: potentiostat: lmp91000: add LMP91002 support	2018-05-12 11:02:44 +01:00
pressure	iio:st_pressure:initial lps22hh sensor support	2019-01-19 17:32:41 +00:00
proximity	iio: proximity: Add driver support for ST's VL53L0X ToF ranging sensor.	2018-09-22 16:42:56 +01:00
resolver	staging:iio:ad2s90: Move out of staging	2018-12-01 15:40:39 +00:00
temperature	iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers	2018-11-16 11:42:12 +00:00
trigger	drivers: iio: Update MODULE AUTHOR email address	2018-08-19 17:23:39 +01:00
Kconfig	staging: iio: ad2s1200: Move driver out of staging	2018-05-20 12:17:48 +01:00
Makefile	staging: iio: ad2s1200: Move driver out of staging	2018-05-20 12:17:48 +01:00
iio_core.h	the rest of drivers/*: annotate ->poll() instances	2017-11-28 11:06:58 -05:00
iio_core_trigger.h	…
industrialio-buffer.c	First round of IIO fixes for the 4.16 cycle.	2018-02-20 10:03:22 +01:00
industrialio-configfs.c	iio: make function argument and some structures const	2017-10-19 16:15:24 +02:00
industrialio-core.c	iio: add IIO_MASSCONCENTRATION channel type	2018-12-16 14:05:57 +00:00
industrialio-event.c	vfs: do bulk POLL* -> EPOLL* replacement	2018-02-11 14:34:03 -08:00
industrialio-sw-device.c	iio: make function argument and some structures const	2017-10-19 16:15:24 +02:00
industrialio-sw-trigger.c	iio: make function argument and some structures const	2017-10-19 16:15:24 +02:00
industrialio-trigger.c	iio:trigger: Remove necessity to have a trig->ops structure.	2017-08-22 21:20:28 +01:00
industrialio-triggered-event.c	iio: Support triggered events	2015-08-27 20:47:09 +01:00
inkern.c	treewide: kzalloc() -> kcalloc()	2018-06-12 16:19:22 -07:00