ebpf-for-windows/docs/GettingStarted.md

Getting Started

Prerequisites

The following must be installed in order to build this project:

1. Git (e.g., Git for Windows 64-bit)
2. Visual Studio 2019, including the "MSVC v142 - VS 2019 C++ x64/x86 Spectre-mitigated libs (v14.28)" which must be selected as an Individual component in the VS installer
3. Visual Studio Build Tools 2019
4. WDK for Windows 10, version 2004
5. Clang for Windows 64-bit version 10.0.0 or The latest release of Clang for Windows 64-bit
6. nuget.exe

How to clone and build the project

1. git clone --recurse-submodules https://github.com/microsoft/ebpf-for-windows.git
2. cd ebpf-for-windows
3. cmake -S external\ebpf-verifier -B external\ebpf-verifier\build
4. nuget restore ebpf-for-windows.sln
5. msbuild /m /p:Configuration=Debug /p:Platform=x64 ebpf-for-windows.sln or to build from within Visual Studio:
   • Open ebpf-for-windows.sln
   • Switch to debug / x64
   • Build solution

This will build the following binaries:

• ebpfcore.sys: The kernel-mode execution context in which eBPF programs run.
• netebpfext.sys: The kernel-mode extension for WFP hooks.
• ebpfapi.dll: A user-mode shared library exposing APIs for apps to call to perform operations such as loading eBPF programs.
• ebpfnetsh.dll: A plugin for the Windows netsh.exe command line tool that provides eBPF command line utility functionality.
• ebpfsvc.exe: A user-mode service that verifies and loads an eBPF program in the execution context.
• unit_tests.exe: A collection of tests using the Catch framework. These tests are also run as part of the Github CI/CD so should always pass.
• ebpf_client.exe: A collection of program verification tests that exercises the RPC channel from client to ebpfsvc. These tests are also run as part of the Github CI/CD so should always pass.
• api_test.exe: A collection of tests that exercises eBPF user mode APIs. This requires EbpSvc service to be running, and EbpCore and NetEbpfExt drivers to be loaded.
• sample_ebpf_ext.sys: A sample eBPF extension driver that implements a test hook (for a test program type) and test helper functions.
• sample_ext_app.exe : A sample application for testing the sample extension driver.
• xdp_tests.exe : Application for testing various XDP functionalities. This requires the EbpSvc service to be running, and the EbpCore and NetEbpfExt drivers to be loaded on a remote system to test.

and a few binaries just used for demo'ing eBPF functionality, as in the demo walkthrough discussed below:

• dnsflood.exe: A utility to send 0-byte DNS packets, to illustrate a case that the sample walkthrough uses eBPF to defend against.
• port_leak.exe: A "buggy" utility to illustrate the effect of an app that leaks ports.
• port_quota.exe: A sample utility to illustrate using eBPF to manage port quotas to defend against port_leak.exe and similar "buggy" apps.

Installing eBPF for Windows

Windows requires that one of the following criteria be met prior to loading a driver: a. Driver is signed using a certificate that chains up to the Microsoft code signing root (aka a production signed driver). b. The OS is booted with a kernel debugger attached. c. The OS is running in test-signing mode, the driver is test signed and the test certificate is installed.

Since the binaries built above are not signed by Microsoft, they will only work on a machine with a kernel debugger (KD) attached and running, or test signing is enabled. (It is expected that official releases of eBPF for Windows will eventually be production signed at some point in the future after security hardening is completed.)

For basic testing, the simplest way to install eBPF for Windows is into a Windows VM with test signing enabled. Follow the VM Installation Instructions to do so.

Using eBPF for Windows

If you're not already familiar with eBPF, or want a detailed walkthrough, see our eBPF tutorial.

For API documentation, see https://microsoft.github.io/ebpf-for-windows/

Port leak and bind observability demo

This section shows how to use eBPF for Windows in a demo that lets us control a UDP port leak by attaching an eBPF program to the socket bind() call via the EBPF_ATTACH_TYPE_BIND hook.

Prep

1. Build the port_leak and port_quota applications from under the tools project.
2. Copy both the exe's to a machine that has eBPF installed. See Installing eBPF for Windows

Demo

1. At a command prompt running as Administrator, run port_quota.exe load to load the port quota eBPF program attached to the bind hook.
2. Set a limit to a threshold number of ports you want to permit an application to bind to by doing port_quota.exe limit 5000
3. Run port_leak.exe in another command prompt. This will just leak UDP ports. Observe the output that bind starts to fail after this app binds 5000 ports.
4. Running port_quota.exe stats will dump how many ports are taken up by an application. Under the covers, the eBPF program communicates this information up to the user mode application via an eBPF map.

DNS flood attack demo

This section shows how to use eBPF for Windows in a demo that defends against a 0-byte UDP attack on a DNS server.

Prep

Set up 2 VMs, which we will refer to as the "attacker" machine and the "defender" machine.

On a defender machine with eBPF installed, do the following:

1. Install and set up a DNS server.
2. Make sure that either test signing was enabled as discussed in Installing eBPF for Windows, or the kernel debugger (KD) is attached and running.
3. Install clang if not already installed on the defender machine.
4. Copy droppacket.c and ebpf.h to a folder (such as c:\test).

On the attacker machine, do the following:

1. Copy DnsFlood.exe to attacker machine

Demo

On the attacker machine

1. Run for /L %i in (1,1,4) do start /min DnsFlood <ip of defender>

On the defender machine

1. Start performance monitor and add UDPv4 Datagrams/sec
2. Show that 200K packets per second are being received
3. Show & explain code of droppacket.c
4. Compile droppacket.c clang -target bpf -O2 -Werror -c droppacket.c -o droppacket.o
5. Show eBPF byte code for droppacket.o netsh ebpf show disassembly droppacket.o xdp
6. Show that the verifier checks the code netsh ebpf show verification droppacket.o xdp
7. Launch netsh netsh
8. Switch to ebpf context ebpf
9. Load eBPF program add program droppacket.o xdp and note the ID.
10. Show UDP datagrams received drop to under 10 per second
11. Unload program delete program <id> where is the ID noted above.
12. Show UDP datagrams received drop to back up to ~200K per second
13. Modify droppacket.c to be unsafe - Comment out line 20 & 21
14. Compile droppacket.c clang -target bpf -O2 -Werror -c droppacket.c -o droppacket.o
15. Show that the verifier rejects the code netsh ebpf show verification droppacket.o xdp
16. Show that loading the program fails netsh ebpf add program droppacket.o xdp

Tests in Ebpf-For-Windows

The tests in Ebpf-For-Windows are written using the Catch2 test framework.

unit_tests.exe

This test uses a mocking layer to bind the user mode components to the kernel mode components via a Mock IOCTL interface. The tests initialize the user mode and kernel mode components, load an eBPF program from an ELF file, and then run the eBPF program by having the mocked extensions emit events.

ebpf_client.exe

This test does verification for different sample programs by parsing the ELF file and sending the verification request to ebpfsvc. For the cases when the verification fails, the test receives and prints the verifier failure message. If ebpfsvc is not already installed, this test tries to install and start the service before executing the tests, hence this test should be run as admin if ebpfsvc is not already installed and running.

api_test.exe

This test exercises various eBPF user mode eBPF APIs, including those to load programs, enumerate maps and programs etc. This test requires the eBPF user mode service (EbpfSvc), and the kernel execution context (EbpfCore.sys) and the Network Extension (NetEbpfExt.sys) to be running. This test is currently not part of the CI pipeline. Developers must run this test manually before checking in changes.

sample_ext_app.exe

This is a test application for the sample eBPF extension. This application loads a test eBPF program and attaches it to the test hook implemented by the sample extension and validates if the eBPF program executed as expected.

Running the tests

1. Set the build output folder as the current working directory.
2. Invoke the appropriate exe.

The Catch2 exes have various command line options to control behavior. Default behavior is to run all the tests and only print information about failing test cases.

Other useful options include:

1. -s to list both passing and failing test cases
2. -b to break into the debugger on test failure
3. -l to list test cases
4. Test_name to run a single test

xdp_tests.exe

This application tests various XDP functionalities. It has the following tests:

1. Reflection Test: This tests the XDP_TX functionality. The following steps show how to run the test:
   1. On the system under test, install eBPF binaries (install-ebpf.bat).
   2. Load the test eBPF program by running the following commands: netsh, ebpf, add program reflect_packet.o xdp and note the ID.
   3. From a remote host, run xdp_tests.exe and in --remote-ip parameter pass an IPv4 or IPv6 address of an Ethernet-like interface on the system under test in string format.
   4. Unload the program from system under test by running delete program <id> on the netsh prompt, where is the ID noted above.