git/commit-graph.h

149 строки
4.5 KiB
C
Исходник Обычный вид История

#ifndef COMMIT_GRAPH_H
#define COMMIT_GRAPH_H
#include "git-compat-util.h"
commit-graph.h: store an odb in 'struct write_commit_graph_context' There are lots of places in 'commit-graph.h' where a function either has (or almost has) a full 'struct object_directory *', accesses '->path', and then throws away the rest of the struct. This can cause headaches when comparing the locations of object directories across alternates (e.g., in the case of deciding if two commit-graph layers can be merged). These paths are normalized with 'normalize_path_copy()' which mitigates some comparison issues, but not all [1]. Replace usage of 'char *object_dir' with 'odb->path' by storing a 'struct object_directory *' in the 'write_commit_graph_context' structure. This is an intermediate step towards getting rid of all path normalization in 'commit-graph.c'. Resolving a user-provided '--object-dir' argument now requires that we compare it to the known alternates for equality. Prior to this patch, an unknown '--object-dir' argument would silently exit with status zero. This can clearly lead to unintended behavior, such as verifying commit-graphs that aren't in a repository's own object store (or one of its alternates), or causing a typo to mask a legitimate commit-graph verification failure. Make this error non-silent by 'die()'-ing when the given '--object-dir' does not match any known alternate object store. [1]: In my testing, for example, I can get one side of the commit-graph code to fill object_dir with "./objects" and the other with just "objects". Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-04 08:51:50 +03:00
#include "object-store.h"
#include "oidset.h"
#define GIT_TEST_COMMIT_GRAPH "GIT_TEST_COMMIT_GRAPH"
commit-graph write: don't die if the existing graph is corrupt When the commit-graph is written we end up calling parse_commit(). This will in turn invoke code that'll consult the existing commit-graph about the commit, if the graph is corrupted we die. We thus get into a state where a failing "commit-graph verify" can't be followed-up with a "commit-graph write" if core.commitGraph=true is set, the graph either needs to be manually removed to proceed, or core.commitGraph needs to be set to "false". Change the "commit-graph write" codepath to use a new parse_commit_no_graph() helper instead of parse_commit() to avoid this. The latter will call repo_parse_commit_internal() with use_commit_graph=1 as seen in 177722b344 ("commit: integrate commit graph with commit parsing", 2018-04-10). Not using the old graph at all slows down the writing of the new graph by some small amount, but is a sensible way to prevent an error in the existing commit-graph from spreading. Just fixing the current issue would be likely to result in code that's inadvertently broken in the future. New code might use the commit-graph at a distance. To detect such cases introduce a "GIT_TEST_COMMIT_GRAPH_DIE_ON_LOAD" setting used when we do our corruption tests, and test that a "write/verify" combo works after every one of our current test cases where we now detect commit-graph corruption. Some of the code changes here might be strictly unnecessary, e.g. I was unable to find cases where the parse_commit() called from write_graph_chunk_data() didn't exit early due to "item->object.parsed" being true in repo_parse_commit_internal() (before the use_commit_graph=1 has any effect). But let's also convert those cases for good measure, we do not have exhaustive tests for all possible types of commit-graph corruption. This might need to be re-visited if we learn to write the commit-graph incrementally, but probably not. Hopefully we'll just start by finding out what commits we have in total, then read the old graph(s) to see what they cover, and finally write a new graph file with everything that's missing. In that case the new graph writing code just needs to continue to use e.g. a parse_commit() that doesn't consult the existing commit-graphs. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-03-25 15:08:33 +03:00
#define GIT_TEST_COMMIT_GRAPH_DIE_ON_LOAD "GIT_TEST_COMMIT_GRAPH_DIE_ON_LOAD"
#define GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS "GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS"
/*
* This method is only used to enhance coverage of the commit-graph
* feature in the test suite with the GIT_TEST_COMMIT_GRAPH and
* GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS environment variables. Do not
* call this method oustide of a builtin, and only if you know what
* you are doing!
*/
void git_test_write_commit_graph_or_die(void);
struct commit;
struct bloom_filter_settings;
struct repository;
struct raw_object_store;
struct string_list;
commit-graph.c: remove path normalization, comparison As of the previous patch, all calls to 'commit-graph.c' functions which perform path normalization (for e.g., 'get_commit_graph_filename()') are of the form 'ctx->odb->path', which is always in normalized form. Now that there are no callers passing non-normalized paths to these functions, ensure that future callers are bound by the same restrictions by making these functions take a 'struct object_directory *' instead of a 'const char *'. To match, replace all calls with arguments of the form 'ctx->odb->path' with 'ctx->odb' To recover the path, functions that perform path manipulation simply use 'odb->path'. Further, avoid string comparisons with arguments of the form 'odb->path', and instead prefer raw pointer comparisons, which accomplish the same effect, but are far less brittle. This has a pleasant side-effect of making these functions much more robust to paths that cannot be normalized by 'normalize_path_copy()', i.e., because they are outside of the current working directory. For example, prior to this patch, Valgrind reports that the following uninitialized memory read [1]: $ ( cd t && GIT_DIR=../.git valgrind git rev-parse HEAD^ ) because 'normalize_path_copy()' can't normalize '../.git' (since it's relative to but above of the current working directory) [2]. By using a 'struct object_directory *' directly, 'get_commit_graph_filename()' does not need to normalize, because all paths are relative to the current working directory since they are always read from the '->path' of an object directory. [1]: https://lore.kernel.org/git/20191027042116.GA5801@sigill.intra.peff.net. [2]: The bug here is that 'get_commit_graph_filename()' returns the result of 'normalize_path_copy()' without checking the return value. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-04 00:18:02 +03:00
char *get_commit_graph_filename(struct object_directory *odb);
commit-graph: don't early exit(1) on e.g. "git status" Make the commit-graph loading code work as a library that returns an error code instead of calling exit(1) when the commit-graph is corrupt. This means that e.g. "status" will now report commit-graph corruption as an "error: [...]" at the top of its output, but then proceed to work normally. This required splitting up the load_commit_graph_one() function so that the code that deals with open()-ing and stat()-ing the graph can now be called independently as open_commit_graph(). This is needed because "commit-graph verify" where the graph doesn't exist isn't an error. See the third paragraph in 283e68c72f ("commit-graph: add 'verify' subcommand", 2018-06-27). There's a bug in that logic where we conflate the intended ENOENT with other errno values (e.g. EACCES), but this change doesn't address that. That'll be addressed in a follow-up change. I'm then splitting most of the logic out of load_commit_graph_one() into load_commit_graph_one_fd_st(), which allows for providing an existing file descriptor and stat information to the loading code. This isn't strictly needed, but it would be redundant and confusing to open() and stat() the file twice for some of the codepaths, this allows for calling open_commit_graph() followed by load_commit_graph_one_fd_st(). The "graph_file" still needs to be passed to that function for the the "graph file %s is too small" error message. This leaves load_commit_graph_one() unused by everything except the internal prepare_commit_graph_one() function, so let's mark it as "static". If someone needs it in the future we can remove the "static" attribute. I could also rewrite its sole remaining user ("prepare_commit_graph_one()") to use load_commit_graph_one_fd_st() instead, but let's leave it at this. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-03-25 15:08:30 +03:00
int open_commit_graph(const char *graph_file, int *fd, struct stat *st);
/*
* Given a commit struct, try to fill the commit struct info, including:
* 1. tree object
* 2. date
* 3. parents.
*
* Returns 1 if and only if the commit was found in the packed graph.
*
* See parse_commit_buffer() for the fallback after this call.
*/
int parse_commit_in_graph(struct repository *r, struct commit *item);
/*
* It is possible that we loaded commit contents from the commit buffer,
* but we also want to ensure the commit-graph content is correctly
* checked and filled. Fill the graph_pos and generation members of
* the given commit.
*/
void load_commit_graph_info(struct repository *r, struct commit *item);
struct tree *get_commit_tree_in_graph(struct repository *r,
const struct commit *c);
struct commit_graph {
const unsigned char *data;
size_t data_len;
unsigned char hash_len;
unsigned char num_chunks;
uint32_t num_commits;
struct object_id oid;
char *filename;
struct object_directory *odb;
uint32_t num_commits_in_base;
struct commit_graph *base_graph;
const uint32_t *chunk_oid_fanout;
const unsigned char *chunk_oid_lookup;
const unsigned char *chunk_commit_data;
commit-graph: rename "large edges" to "extra edges" The optional 'Large Edge List' chunk of the commit graph file stores parent information for commits with more than two parents, and the names of most of the macros, variables, struct fields, and functions related to this chunk contain the term "large edges", e.g. write_graph_chunk_large_edges(). However, it's not a really great term, as the edges to the second and subsequent parents stored in this chunk are not any larger than the edges to the first and second parents stored in the "main" 'Commit Data' chunk. It's the number of edges, IOW number of parents, that is larger compared to non-merge and "regular" two-parent merge commits. And indeed, two functions in 'commit-graph.c' have a local variable called 'num_extra_edges' that refer to the same thing, and this "extra edges" term is much better at describing these edges. So let's rename all these references to "large edges" in macro, variable, function, etc. names to "extra edges". There is a GRAPH_OCTOPUS_EDGES_NEEDED macro as well; for the sake of consistency rename it to GRAPH_EXTRA_EDGES_NEEDED. We can do so safely without causing any incompatibility issues, because the term "large edges" doesn't come up in the file format itself in any form (the chunk's magic is {'E', 'D', 'G', 'E'}, there is no 'L' in there), but only in the specification text. The string "large edges", however, does come up in the output of 'git commit-graph read' and in tests looking at its input, but that command is explicitly documented as debugging aid, so we can change its output and the affected tests safely. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-19 23:21:13 +03:00
const unsigned char *chunk_extra_edges;
const unsigned char *chunk_base_graphs;
const unsigned char *chunk_bloom_indexes;
const unsigned char *chunk_bloom_data;
struct bloom_filter_settings *bloom_filter_settings;
};
struct commit_graph *load_commit_graph_one_fd_st(int fd, struct stat *st,
struct object_directory *odb);
struct commit_graph *read_commit_graph_one(struct repository *r,
struct object_directory *odb);
struct commit_graph *parse_commit_graph(void *graph_map, size_t graph_size);
commit-reach: use can_all_from_reach The is_descendant_of method previously used in_merge_bases() to check if the commit can reach any of the commits in the provided list. This had two performance problems: 1. The performance is quadratic in worst-case. 2. A single in_merge_bases() call requires walking beyond the target commit in order to find the full set of boundary commits that may be merge-bases. The can_all_from_reach method avoids this quadratic behavior and can limit the search beyond the target commits using generation numbers. It requires a small prototype adjustment to stop using commit-date as a cutoff, as that optimization is no longer appropriate here. Since in_merge_bases() uses paint_down_to_common(), is_descendant_of() naturally found cutoffs to avoid walking the entire commit graph. Since we want to always return the correct result, we cannot use the min_commit_date cutoff in can_all_from_reach. We then rely on generation numbers to provide the cutoff. Since not all repos will have a commit-graph file, nor will we always have generation numbers computed for a commit-graph file, create a new method, generation_numbers_enabled(), that checks for a commit-graph file and sees if the first commit in the file has a non-zero generation number. In the case that we do not have generation numbers, use the old logic for is_descendant_of(). Performance was meausured on a copy of the Linux repository using the 'test-tool reach is_descendant_of' command using this input: A:v4.9 X:v4.10 X:v4.11 X:v4.12 X:v4.13 X:v4.14 X:v4.15 X:v4.16 X:v4.17 X.v3.0 Note that this input is tailored to demonstrate the quadratic nature of the previous method, as it will compute merge-bases for v4.9 versus all of the later versions before checking against v4.1. Before: 0.26 s After: 0.21 s Since we previously used the is_descendant_of method in the ref_newer method, we also measured performance there using 'test-tool reach ref_newer' with this input: A:v4.9 B:v3.19 Before: 0.10 s After: 0.08 s By adding a new commit with parent v3.19, we test the non-reachable case of ref_newer: Before: 0.09 s After: 0.08 s Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-20 19:33:30 +03:00
/*
* Return 1 if and only if the repository has a commit-graph
* file and generation numbers are computed in that file.
*/
int generation_numbers_enabled(struct repository *r);
enum commit_graph_write_flags {
COMMIT_GRAPH_WRITE_APPEND = (1 << 0),
COMMIT_GRAPH_WRITE_PROGRESS = (1 << 1),
commit-graph: error out on invalid commit oids in 'write --stdin-commits' While 'git commit-graph write --stdin-commits' expects commit object ids as input, it accepts and silently skips over any invalid commit object ids, and still exits with success: # nonsense $ echo not-a-commit-oid | git commit-graph write --stdin-commits $ echo $? 0 # sometimes I forgot that refs are not good... $ echo HEAD | git commit-graph write --stdin-commits $ echo $? 0 # valid tree OID, but not a commit OID $ git rev-parse HEAD^{tree} | git commit-graph write --stdin-commits $ echo $? 0 $ ls -l .git/objects/info/commit-graph ls: cannot access '.git/objects/info/commit-graph': No such file or directory Check that all input records are indeed valid commit object ids and return with error otherwise, the same way '--stdin-packs' handles invalid input; see e103f7276f (commit-graph: return with errors during write, 2019-06-12). Note that it should only return with error when encountering an invalid commit object id coming from standard input. However, '--reachable' uses the same code path to process object ids pointed to by all refs, and that includes tag object ids as well, which should still be skipped over. Therefore add a new flag to 'enum commit_graph_write_flags' and a corresponding field to 'struct write_commit_graph_context', so we can differentiate between those two cases. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Acked-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-08-05 11:02:40 +03:00
COMMIT_GRAPH_WRITE_SPLIT = (1 << 2),
commit-graph: drop COMMIT_GRAPH_WRITE_CHECK_OIDS flag Since 7c5c9b9c57 (commit-graph: error out on invalid commit oids in 'write --stdin-commits', 2019-08-05), the commit-graph builtin dies on receiving non-commit OIDs as input to '--stdin-commits'. This behavior can be cumbersome to work around in, say, the case of piping 'git for-each-ref' to 'git commit-graph write --stdin-commits' if the caller does not want to cull out non-commits themselves. In this situation, it would be ideal if 'git commit-graph write' wrote the graph containing the inputs that did pertain to commits, and silently ignored the remainder of the input. Some options have been proposed to the effect of '--[no-]check-oids' which would allow callers to have the commit-graph builtin do just that. After some discussion, it is difficult to imagine a caller who wouldn't want to pass '--no-check-oids', suggesting that we should get rid of the behavior of complaining about non-commit inputs altogether. If callers do wish to retain this behavior, they can easily work around this change by doing the following: git for-each-ref --format='%(objectname) %(objecttype) %(*objecttype)' | awk ' !/commit/ { print "not-a-commit:"$1 } /commit/ { print $1 } ' | git commit-graph write --stdin-commits To make it so that valid OIDs that refer to non-existent objects are indeed an error after loosening the error handling, perform an extra lookup to make sure that object indeed exists before sending it to the commit-graph internals. Helped-by: Jeff King <peff@peff.net> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-05-14 00:59:55 +03:00
COMMIT_GRAPH_WRITE_BLOOM_FILTERS = (1 << 3),
};
enum commit_graph_split_flags {
COMMIT_GRAPH_SPLIT_UNSPECIFIED = 0,
builtin/commit-graph.c: introduce split strategy 'replace' When using split commit-graphs, it is sometimes useful to completely replace the commit-graph chain with a new base. For example, consider a scenario in which a repository builds a new commit-graph incremental for each push. Occasionally (say, after some fixed number of pushes), they may wish to rebuild the commit-graph chain with all reachable commits. They can do so with $ git commit-graph write --reachable but this removes the chain entirely and replaces it with a single commit-graph in 'objects/info/commit-graph'. Unfortunately, this means that the next push will have to move this commit-graph into the first layer of a new chain, and then write its new commits on top. Avoid such copying entirely by allowing the caller to specify that they wish to replace the entirety of their commit-graph chain, while also specifying that the new commit-graph should become the basis of a fresh, length-one chain. This addresses the above situation by making it possible for the caller to instead write: $ git commit-graph write --reachable --split=replace which writes a new length-one chain to 'objects/info/commit-graphs', making the commit-graph incremental generated by the subsequent push relatively cheap by avoiding the aforementioned copy. In order to do this, remove an assumption in 'write_commit_graph_file' that chains are always at least two incrementals long. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-14 07:04:17 +03:00
COMMIT_GRAPH_SPLIT_MERGE_PROHIBITED = 1,
COMMIT_GRAPH_SPLIT_REPLACE = 2
};
struct split_commit_graph_opts {
int size_multiple;
int max_commits;
timestamp_t expire_time;
enum commit_graph_split_flags flags;
};
/*
* The write_commit_graph* methods return zero on success
* and a negative value on failure. Note that if the repository
* is not compatible with the commit-graph feature, then the
* methods will return 0 without writing a commit-graph.
*/
commit-graph.h: store an odb in 'struct write_commit_graph_context' There are lots of places in 'commit-graph.h' where a function either has (or almost has) a full 'struct object_directory *', accesses '->path', and then throws away the rest of the struct. This can cause headaches when comparing the locations of object directories across alternates (e.g., in the case of deciding if two commit-graph layers can be merged). These paths are normalized with 'normalize_path_copy()' which mitigates some comparison issues, but not all [1]. Replace usage of 'char *object_dir' with 'odb->path' by storing a 'struct object_directory *' in the 'write_commit_graph_context' structure. This is an intermediate step towards getting rid of all path normalization in 'commit-graph.c'. Resolving a user-provided '--object-dir' argument now requires that we compare it to the known alternates for equality. Prior to this patch, an unknown '--object-dir' argument would silently exit with status zero. This can clearly lead to unintended behavior, such as verifying commit-graphs that aren't in a repository's own object store (or one of its alternates), or causing a typo to mask a legitimate commit-graph verification failure. Make this error non-silent by 'die()'-ing when the given '--object-dir' does not match any known alternate object store. [1]: In my testing, for example, I can get one side of the commit-graph code to fill object_dir with "./objects" and the other with just "objects". Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-04 08:51:50 +03:00
int write_commit_graph_reachable(struct object_directory *odb,
enum commit_graph_write_flags flags,
const struct split_commit_graph_opts *split_opts);
commit-graph.h: store an odb in 'struct write_commit_graph_context' There are lots of places in 'commit-graph.h' where a function either has (or almost has) a full 'struct object_directory *', accesses '->path', and then throws away the rest of the struct. This can cause headaches when comparing the locations of object directories across alternates (e.g., in the case of deciding if two commit-graph layers can be merged). These paths are normalized with 'normalize_path_copy()' which mitigates some comparison issues, but not all [1]. Replace usage of 'char *object_dir' with 'odb->path' by storing a 'struct object_directory *' in the 'write_commit_graph_context' structure. This is an intermediate step towards getting rid of all path normalization in 'commit-graph.c'. Resolving a user-provided '--object-dir' argument now requires that we compare it to the known alternates for equality. Prior to this patch, an unknown '--object-dir' argument would silently exit with status zero. This can clearly lead to unintended behavior, such as verifying commit-graphs that aren't in a repository's own object store (or one of its alternates), or causing a typo to mask a legitimate commit-graph verification failure. Make this error non-silent by 'die()'-ing when the given '--object-dir' does not match any known alternate object store. [1]: In my testing, for example, I can get one side of the commit-graph code to fill object_dir with "./objects" and the other with just "objects". Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-04 08:51:50 +03:00
int write_commit_graph(struct object_directory *odb,
struct string_list *pack_indexes,
struct oidset *commits,
enum commit_graph_write_flags flags,
const struct split_commit_graph_opts *split_opts);
#define COMMIT_GRAPH_VERIFY_SHALLOW (1 << 0)
int verify_commit_graph(struct repository *r, struct commit_graph *g, int flags);
void close_commit_graph(struct raw_object_store *);
void free_commit_graph(struct commit_graph *);
upload-pack: disable commit graph more gently for shallow traversal When the client has asked for certain shallow options like "deepen-since", we do a custom rev-list walk that pretends to be shallow. Before doing so, we have to disable the commit-graph, since it is not compatible with the shallow view of the repository. That's handled by 829a321569 (commit-graph: close_commit_graph before shallow walk, 2018-08-20). That commit literally closes and frees our repo->objects->commit_graph struct. That creates an interesting problem for commits that have _already_ been parsed using the commit graph. Their commit->object.parsed flag is set, their commit->graph_pos is set, but their commit->maybe_tree may still be NULL. When somebody later calls repo_get_commit_tree(), we see that we haven't loaded the tree oid yet and try to get it from the commit graph. But since it has been freed, we segfault! So the root of the issue is a data dependency between the commit's lazy-load of the tree oid and the fact that the commit graph can go away mid-process. How can we resolve it? There are a couple of general approaches: 1. The obvious answer is to avoid loading the tree from the graph when we see that it's NULL. But then what do we return for the tree oid? If we return NULL, our caller in do_traverse() will rightly complain that we have no tree. We'd have to fallback to loading the actual commit object and re-parsing it. That requires teaching parse_commit_buffer() to understand re-parsing (i.e., not starting from a clean slate and not leaking any allocated bits like parent list pointers). 2. When we close the commit graph, walk through the set of in-memory objects and clear any graph_pos pointers. But this means we also have to "unparse" any such commits so that we know they still need to open the commit object to fill in their trees. So it's no less complicated than (1), and is more expensive (since we clear objects we might not later need). 3. Stop freeing the commit-graph struct. Continue to let it be used for lazy-loads of tree oids, but let upload-pack specify that it shouldn't be used for further commit parsing. 4. Push the whole shallow rev-list out to its own sub-process, with the commit-graph disabled from the start, giving it a clean memory space to work from. I've chosen (3) here. Options (1) and (2) would work, but are non-trivial to implement. Option (4) is more expensive, and I'm not sure how complicated it is (shelling out for the actual rev-list part is easy, but we do then parse the resulting commits internally, and I'm not clear which parts need to be handling shallow-ness). The new test in t5500 triggers this segfault, but see the comments there for how horribly intimate it has to be with how both upload-pack and commit graphs work. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-09-12 17:44:45 +03:00
/*
* Disable further use of the commit graph in this process when parsing a
* "struct commit".
*/
void disable_commit_graph(struct repository *r);
struct commit_graph_data {
uint32_t graph_pos;
uint32_t generation;
};
/*
* Commits should be parsed before accessing generation, graph positions.
*/
uint32_t commit_graph_generation(const struct commit *);
uint32_t commit_graph_position(const struct commit *);
#endif