currently for cases like
From: A U Thor <a.u.thor@example.com> (Comment)
mailinfo extracts the following 'Author:' field:
Author: A U Thor (Comment)
^^
which has two extra spaces left in there after removed email part.
I think this is wrong so here is a fix.
Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ks/maint-mailinfo-folded:
mailinfo: tests for RFC2047 examples
mailinfo: add explicit test for mails like '<a.u.thor@example.com> (A U Thor)'
mailinfo: 'From:' header should be unfold as well
mailinfo: correctly handle multiline 'Subject:' header
* sp/runtime-prefix:
Windows: Revert to default paths and convert them by RUNTIME_PREFIX
Compute prefix at runtime if RUNTIME_PREFIX is set
Modify setup_path() to only add git_exec_path() to PATH
Add calls to git_extract_argv0_path() in programs that call git_config_*
git_extract_argv0_path(): Move check for valid argv0 from caller to callee
Refactor git_set_argv0_path() to git_extract_argv0_path()
Move computation of absolute paths from Makefile to runtime (in preparation for RUNTIME_PREFIX)
* jk/signal-cleanup:
t0005: use SIGTERM for sigchain test
pager: do wait_for_pager on signal death
refactor signal handling for cleanup functions
chain kill signals for cleanup functions
diff: refactor tempfile cleanup handling
Windows: Fix signal numbers
git difftool listed some candidates for mergetools twice, depending on
the environment.
This slightly changes the behavior when both KDE_FULL_SESSION and
GNOME_DESKTOP_SESSION_ID are set at the same time; in such a case
meld is used in favor of kdiff3 (the old code favored kdiff3 in such a
case), but it should not matter in practice.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Acked-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parameter n of unpack_callback() can have a value of up to
MAX_UNPACK_TREES. The check at the top of unpack_trees() (its only
(indirect) caller) makes sure it cannot exceed this limit.
unpack_callback() passes it and the array src to unpack_nondirectories(),
which has this loop:
for (i = 0; i < n; i++) {
/* ... */
src[i + o->merge] = o->df_conflict_entry;
o->merge can be 0 or 1, so unpack_nondirectories() potentially accesses
the array src at index MAX_UNPACK_TREES. This patch makes it big enough.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
a6c7a27 (rebase -i: correctly remember --root flag across --continue,
2009-01-26) introduced a more portable GIT_EDITOR usage, but left the
old tests unchanged.
Since we never use the editor (all tests run the rebase script as
proposed by rebase -i), just disable it outright, which simplifies the
tests.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the example, Joe Developer has <joe@example.com> as his email,
but in the .mailmap is <joe@random.com>. Use example.com instead.
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CVS server was running the hook before the update action was
actually done. This performs the update before the hook is called.
The original commit that introduced the current incorrect behavior
was 394d66d "git-cvsserver runs hooks/post-update". The error in
ordering of the hook call appears to have gone unnoticed, but since
git-cvsserver is supposed to emulate receive-pack, it stands to
reason that the hook should be run *after* the update. Since this
behavior is inconsistent with recieve-pack, users are either:
1) not using post-update hooks with git-cvsserver;
2) using post-update hooks that don't care whether they are
called before or after the actual update occurs;
3) using post-update hooks *only* with git-cvsserver, and
relying on the hook being called just before the update.
This patch would affect only users in case 3. These users are
depending on fairly obviously wrong behavior, and moreover they can
simply change their current post-update into post-recieve hooks,
and their systems will work correctly again.
Signed-off-by: Stefan Karpinski <stefan.karpinski@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When trying to find out mode changes, we should not access the symlink
targets using stat(); instead we use lstat() so that the diff does
not fail trying to find a non-existing symlink target.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document some possible Apache configurations when the path_info feature
is enabled in gitweb.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gitweb links to a number of static files such as CSS stylesheets,
favicon or the git logo. When, such as with the default Makefile, the
paths to these files are relative (i.e. doesn't start with a "/"), the
files become inaccessible in any view other tha project list and summary
page if gitweb is invoked with a non-empty PATH_INFO.
Fix this by adding a <base> element pointing to the script's own URL,
which ensure that all relative paths will be resolved correctly.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The CVS protocol documentation, found at
http://www.wandisco.com/techpubs/cvs-protocol.pdf
states the following about the 'noop' command:
Response expected: yes. This request is a null command
in the sense that it doesn't do anything, but merely
(as with any other requests expecting a response) sends
back any responses pertaining to pending errors, pending
Notified responses, etc.
In accordance with this, the correct way to handle the 'noop'
command, when issued by a client, is to call req_EMPTY.
The 'noop' command is called by some CVS clients, notably
TortoiseCVS, thus making it desirable for git-cvsserver to
respond to the command rather than choking on it as unknown.
Signed-off-by: Stefan Karpinski <stefan.karpinski@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The signal tests consists of checking that each of our
handlers is executed, and that the test program was killed
by the final signal. We arbitrarily used SIGINT as the kill
signal.
However, some platforms (notably Solaris) will default
SIGINT to SIG_IGN if there is no controlling terminal. In
that case, we don't end up killing the program with the
final signal and the test fails.
This is a problem since the test script should not depend
on outside factors; let's use SIGTERM instead, which should
behave consistently.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The size of the content we are adding may be larger than
2.1G (i.e., "git add gigantic-file"). Most of the code-path
to do so uses size_t or unsigned long to record the size,
but write_loose_object uses a signed int.
On platforms where "int" is 32-bits (which includes x86_64
Linux platforms), we end up passing malloc a negative size.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the newly introduced test_commit() and test_merge() helpers.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use test_commit() and test_merge(). This way, it is harder to forget to
tag, or to call test_tick before committing.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use test_commit() and test_merge(), reducing the code while making the
intent clearer.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Often we just need to add a commit with a given (short) name, that will
be tagged with the same name. Now, relatively complicated graphs can be
constructed easily and in a clear fashion:
test_commit A &&
test_commit B &&
git checkout A &&
test_commit C &&
test_merge D B
will construct this graph:
A - B
\ \
C - D
For simplicity, files whose name is the lower case version of the commit
message (to avoid a warning about ambiguous names) will be committed, with
the corresponding commit messages as contents.
If you need to provide a different file/different contents, you can use
the more explicit form
test_commit $MESSAGE $FILENAME $CONTENTS
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it easy for other authors to use rebase tests' fake-editor.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than copying and pasting, which is prone to lead to fixes
missing in one version, move the fake-editor generator to t/t3404/.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also as suggested by Junio, in order to try to catch other MIME
problems, test cases from the "8. Examples" section of RFC2047 are added
to t5100 testsuite as well.
Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
Actually, I think the issue is pretty independent of submodules; when
"git commit" gets an empty parameter, it misinterprets it as a file.
So avoid passing an empty parameter to "git commit".
Actually, this is a nice cleanup, as MSG_FILE and EDIT_COMMIT were mutually
exclusive; use one variable instead
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Attempting to rebase three-commit series (two regular changes, followed by
one commit that changes what commit is bound for a submodule path) to
squash the first two results in a failure; not just the first two commits
squashed, but the change to the submodule is also included in the result.
This failure causes the subsequent step to "pick" the change that actually
changes the submodule to be applied, because there is no change left to be
applied.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Offering Last-modified header for feeds is only half the work, even if
we bail out early on HEAD requests. We should also check that same date
against If-modified-since, and bail out early with 304 Not Modified if
that's the case.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Kirill Smelkov
Junio C Hamano
David Aguilar
Markus Heidelberg
René Scharfe
Thomas Rast
Michele Ballabio
Stefan Karpinski
Johannes Schindelin
Giuseppe Bilotta
Jeff King
Kirill Smelkov