In a working tree of a git managed repository, "grep --untracked" would
find the specified patterns from files in untracked files in addition to
its usual behaviour of finding them in the tracked files.
By default, when working with "--no-index" option, "grep" does not pay
attention to .gitignore mechanism. "grep --no-index --exclude-standard"
can be used to tell the command to use .gitignore and stop reporting hits
from files that would be ignored. Also, when working without "--no-index",
"grep" honors .gitignore mechanism, and "grep --no-exclude-standard" can
be used to tell the command to include hits from files that are ignored.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --no-index mode is intended to be used outside of a git repository, and
it does not make sense to apply the git standard exclusions outside a git
repositories.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Utilize the PARSE_OPT_NEGHELP option to show --no-index in the usage
generated by parse-options.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch converts the setenv() calls in path.c and setup.c. After
the call, git grep with a pager works again in bare repos.
It leaves the setenv(GIT_DIR_ENVIRONMENT, ...) calls in git.c alone, as
they respond to command line switches that emulate the effect of setting
the environment variable directly.
The remaining site in environment.c is in set_git_dir() and is left
alone, too, of course. Finally, builtin-init-db.c is left changed
because the repo is still being carefully constructed when the
environment variable is set.
This fixes git shortlog when run inside a git directory, which had been
broken by abe549e1.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Revert the previous attempt to skip this test on platforms where we
currently cannot determine the system load. We want to make sure that
the max-load-limit codepath produces results cleanly, when gitweb is
updated and becomes capable of reading the load average by some other
method.
The code to check for load returns 0 if it doesn't know how to find
load. It also checks to see if the current load is higher than the
max load. So to force the script to quit early by setting the maxload
variable negative which should work for systems where we can detect
load (which should be a positive number) and systems where we can't
(where detected load is 0)
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently gitweb only knows how to check for load using /proc/loadavg,
which isn't available on all systems. We shouldn't fail the test just
because we don't know how to check the system load.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '--full' option to git fsck does two things:
1) Check objects in packs
2) Check alternate objects
This is documented in the git fsck manual; this patch reflects that in
the short git fsck option help message as well.
Signed-off-by: Wesley J. Landaker <wjl@icecavern.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It seems that we have bad interaction with the code related to
GIT_WORK_TREE and "grep --no-index", and broke running grep inside
the .git directory. For now, just revert it and resurrect it after
1.7.0 ships.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make memoization of the svn:mergeinfo processing functions persistent with
Memoize::Storable so that the memoization tables don't need to be regenerated
every time the user runs git-svn fetch.
The Memoize::Storable hashes are stored in ENV{GIT_DIR}/svn/.caches.
[ew: changed caches path to avoid conflicts with old repos]
[ew: File::Path::{make_path => mkpath} for compatibility]
[ew: line-wrapped at 80 chars]
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Andrew Myrick <amyrick@apple.com>
Similar in spirit to 07cf0f2 (make --max-pack-size argument to 'git
pack-object' count in bytes, 2010-02-03) which made the option by the same
name to pack-objects, this counts the pack size limit in bytes.
In order not to cause havoc with people used to the previous megabyte
scale an integer smaller than 8192 is interpreted in megabytes but the
user gets a warning. Also a minimum size of 1 MiB is enforced to avoid an
explosion of pack files.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
This default for repack.UseDeltaBaseOffset has been "true" since
Git v1.6.0.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, when called without -n and -f, git clean issues
fatal: clean.requireForce not set and -n or -f not given; refusing to clean
which leaves the user wondering why force is required when requireForce
is not set. Looking up in git-clean(1) does not help because its
description is wrong.
Change it so that git clean issues
fatal: clean.requireForce defaults to true and -n or -f not given; refusing to clean
in this situation (and "...set to true..." when it is set) which makes
it clearer that an unset config means true here, and adjust the
documentation.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Manual merge made at 844ad3d (Merge branch 'sp/maint-fast-import-large-blob'
into sp/fast-import-large-blob, 2010-02-01) did not correctly reflect the change
of unit in which this variable's value is counted from its previous version.
Now it counts in bytes, not in megabytes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
The value passed to --max-pack-size used to count in MiB which was
inconsistent with the corresponding configuration variable as well as
other command arguments which are defined to count in bytes with an
optional unit suffix. This brings --max-pack-size in line with the
rest of Git.
Also, in order not to cause havoc with people used to the previous
megabyte scale, and because this is a sane thing to do anyway, a
minimum size of 1 MiB is enforced to avoid an explosion of pack files.
Adjust and extend test suite accordingly.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Current handling of pack_size_limit is quite suboptimal. Let's consider
a list of objects to pack which contain alternatively big and small
objects (which pretty matches reality when big blobs are interlaced
with tree objects). Currently, the code simply close the pack and opens
a new one when the next object in line breaks the size limit.
The current code may degenerate into:
- small tree object => store into pack #1
- big blob object busting the pack size limit => store into pack #2
- small blob but pack #2 is over the limit already => pack #3
- big blob busting the size limit => pack #4
- small tree but pack #4 is over the limit => pack #5
- big blob => pack #6
- small tree => pack #7
- ... and so on.
The reality is that the content of packs 1, 3, 5 and 7 could well be
stored more efficiently (and delta compressed) together in pack #1 if
the big blobs were not forcing an immediate transition to a new pack.
Incidentally this can be fixed pretty easily by simply skipping over
those objects that are too big to fit in the current pack while trying
the whole list of unwritten objects, and then that list considered from
the beginning again when a new pack is opened. This creates much fewer
smallish pack files and help making more predictable test cases for the
test suite.
This change made one of the self sanity checks useless so it is removed
as well. That check was rather redundant already anyway.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
First of all, trying to run 'git verify-pack' on packs produced by
the tests using pack.packSizeLimit always failed. After lots of digging
and head scratching, it turns out that the preceeding test simulating
a SHA1 collision did leave the repository quite confused, impacting
subsequent tests.
So let's move that destructive test last, and add tests to run
verify-pack on the output from those packSizeLimit tests to catch such
goofage.
Finally, group those packSizeLimit tests together.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The chop_str subroutine is meant to be used on strings (such as commit
description / title) *before* HTML escaping, which means before
applying esc_html or equivalent.
Therefore get rid of the failed attempt to always remove full HTML
entities (like e.g. & or ). It is not necessary (HTML
entities gets added later), and it can cause chop_str to chop a string
incorrectly.
Specifically:
API & protocol: support option to force written data immediately to disk
from http://git.kernel.org/?p=daemon/distsrv/chunkd.git;a=commit;h=3b02f749df2cb1288f345a689d85e7061f507e54
The short version of the title gets chopped to
API ...
where it should be
API & protocol: support option to force written data...
Noticed-by: John 'Warthog9' Hawley <warthog9@kernel.org>
Signed-off-by: John 'Warthog9' Hawley <warthog9@kernel.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After 885d211e, the value of the ->fixed pattern option only depends on
the grep option of the same name. Regex flags don't matter any more,
because fixed mode and regex mode are strictly separated. Thus we can
simply copy the value from struct grep_opt to struct grep_pat, as we do
already for ->word_regexp and ->ignore_case.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ms/filter-branch-submodule:
filter-branch: Add tests for submodules in tree-filter
filter-branch: Fix to allow replacing submodules with another content
* 'jh/gitweb-caching' (early part):
gitweb: Add optional extra parameter to die_error, for extended explanation
gitweb: add a "string" variant of print_sort_th
gitweb: add a "string" variant of print_local_time
gitweb: Check that $site_header etc. are defined before using them
gitweb: Makefile improvements
gitweb: Load checking
gitweb: Make running t9501 test with '--debug' reliable and usable
The new dircache extension CACHE_EXT_RESOLVE_UNDO, whose value is
0x52455543, is actually the ASCII sequence 'REUC', not the ASCII
sequence 'REUN'.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recently introduced resolve_undo_read() expected arithmetic to (void *)
to work on byte-addresses. Correct this.
Noticed by Brandon Casey.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch allows someone to use configure to build git while at the
same time disabling the python remote helper code. It leverages the
ability of GIT_ARG_SET_PATH to accept an optional second argument
indicating that --without-$PROGRAM is acceptable.
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an optional second argument to both GIT_ARG_SET_PATH and
GIT_CONF_APPEND_PATH such that any value of the second argument will
enable configure to set NO_$PROGRAM in addition to an empty
$PROGRAM_PATH. This is initially useful for allowing configure to
disable the use of python, as the remote helper code has nothing
leveraging it yet.
The Makefile already recognizes NO_PYTHON, but configure provided no
way to set it appropriately.
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sp/maint-fast-import-large-blob:
fast-import: Stream very large blobs directly to pack
bash: don't offer remote transport helpers as subcommands
Conflicts:
fast-import.c
If a blob is larger than the configured big-file-threshold, instead
of reading it into a single buffer obtained from malloc, stream it
onto the end of the current pack file. Streaming the larger objects
into the pack avoids the 4+ GiB memory footprint that occurs when
fast-import is processing 2+ GiB blobs.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix sync errors due to new Perforce servers.
The P4D/NTX64/2009.2/228098 (2009/12/16) server reports
'move/delete' instead of 'delete'. This causes the Perforce
depot and the git repo to get out of sync. Fixed by adding
the new status string.
Signed-off-by: Pal-Kristian Engstad <pal_engstad@naughtydog.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the release notes "git status" was not mentioned, also shortly explain
the "-dirty" output generated by diff.
Added a paragraph to the "Pitfalls with submodules" section in
user-manual.txt describing new and old behavior of "git status" and "git
diff" for dirty submodules.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the first piece of threaded code was introduced in commit 8ecce684, it
came with its own THREADED_DELTA_SEARCH Makefile option. Since this time,
more threaded code has come into the codebase and a NO_PTHREADS option has
also been added. Get rid of the original option as the newer, more generic
option covers everything we need.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to
https://www.redhat.com/archives/fedora-devel-list/2010-January/msg00093.html
scope of %define lasts until the end brace; earlier RPM up to Fedora 12
didn't necessarily honor the scope, but later versions corrected the bug.
Problem and solution both pointed out by Todd Zullinger.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is already in the "bells and whistles" section, but it also has a
slight chance of breakage, so let's also mention it in the "changed
behaviors" section.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The strbuf used in add_submodule_odb() was never released. So for every
submodule - populated or not - we leaked its object directory name when
using "git diff*" with the --submodule option.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a 3rd, optional, parameter to die_error to allow for extended error
information to be output along with what the error was.
Signed-off-by: John 'Warthog9' Hawley <warthog9@kernel.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function (named format_sort_th) that returns the string that
print_sort_th would print.
Signed-off-by: John 'Warthog9' Hawley <warthog9@kernel.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function (named format_local_time) that returns the string that
print_local_time would print.
Signed-off-by: John 'Warthog9' Hawley <warthog9@kernel.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If one of $site_header, $site_footer or $home_text is not defined, you
get extraneous errors in the web logs, for example (line wrapped for
better readibility):
[Wed Jan 13 16:55:42 2010] [error] [client ::1] [Wed Jan 13 16:55:42 2010]
gitweb.cgi: Use of uninitialized value $site_header in -f at
/var/www/gitweb/gitweb.cgi line 3287., referer: http://git/gitweb.cgi
This ensures that those variables are defined before trying to use it.
Note that such error can happen only because of an error in gitweb
config file; building gitweb.cgi can make mentioned variables holding
empty string (it is even the default), but they are still defined.
Signed-off-by: John 'Warthog9' Hawley <warthog9@kernel.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the main Makefile so you can simply run
make gitweb
which in turn calls gitweb/Makefile. This means that in order to
generate gitweb, you can simply run 'make' from gitweb subdirectory:
cd gitweb
make
Targets gitweb/gitweb.cgi and (dependent on JSMIN being defined)
gitweb/gitweb.min.js in main Makefile are preserved for backward
compatibility.
Signed-off-by: John 'Warthog9' Hawley <warthog9@kernel.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes slightly the behavior of gitweb, so that it verifies
that the box isn't inundated with before attempting to serve gitweb.
If the box is overloaded, it basically returns a 503 Server Unavailable
until the load falls below the defined threshold. This helps dramatically
if you have a box that's I/O bound, reaches a certain load and you
don't want gitweb, the I/O hog that it is, increasing the pain the
server is already undergoing.
This behavior is controlled by $maxload configuration variable.
Default is a load of 300, which for most cases should never be hit.
Unset it (set it to undefined value, i.e. undef) to turn off checking.
Currently it requires that '/proc/loadavg' file exists, otherwise the
load check is bypassed (load is taken to be 0). So platforms that do
not implement '/proc/loadavg' currently cannot use this feature
(provisions are included for additional checks to be added by others).
There is simple test in t/t9501-gitweb-standalone-http-status.sh to
check that it correctly returns "503 Service Unavailable" if load is
too high, and also if there are any Perl warnings or errors.
Signed-off-by: John 'Warthog9' Hawley <warthog9@kernel.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Bert Wesarg
René Scharfe
Brian Gernhardt
Björn Gustavsson
Wesley J. Landaker
Andrew Myrick
Nicolas Pitre
Michael J Gruber
John 'Warthog9' Hawley
Paul Mackerras
Shawn O. Pearce
Ben Walton
Pal-Kristian Engstad
Jens Lehmann
Dan McGee
Jeff King
Ralf Wildenhues