docbook-xsl 1.72.0 is thirteen years old. Drop the ASCIIDOC_ROFF knob
which was needed to support 1.68.1 - 1.71.1. The next commit will
increase the required/assumed version further.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than hardcoding "Git Manual" and "Git" as the manual and source
in asciidoc.conf, provide them as attributes `manmanual` and
`mansource`. Rename the `git_version` attribute to `manversion`.
These new attribute names are not arbitrary, see, e.g., [1].
For AsciiDoc (8.6.10) and Asciidoctor <1.5.7, this is a no-op. Starting
with Asciidoctor 1.5.7, `manmanual` and `mansource` actually end up in
the xml-files and eventually in the rendered manpages. In particular,
the manpage headers now render just as with AsciiDoc.
No versions of Asciidoctor pick up the `manversion` [2], and older
versions don't pick up any of these attributes. -- We'll fix that with a
bit of a hack in the next commit.
[1] https://asciidoctor.org/docs/user-manual/#man-pages
[2] Note how [1] says "Not used by Asciidoctor".
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the earlier days, we used to spell the name of the system as GIT,
to simulate as if it were typeset with capital G and IT in small
caps. Later we stopped doing so at around 1.6.5 days.
Let's stop doing so throughout the documentation. The name to refer
to the whole system (and the concept it embodies) is "Git"; the
command end-users type is "git". And document this in the coding
guideline.
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation in the TeXinfo format was using indented output
for materials meant to be examples that are better typeset in
monospace.
* jk/docs-docbook-monospace-display:
docs: monospace listings in docbook output
When asciidoc converts a listing block like:
----------------------
$ git log --merge
----------------------
it marks it to be displayed in a monospace font. This works
fine when generating HTML output. However, when generating
docbook output, we override the expansion of a listingblock
to work around bugs in some versions of the docbook
toolchain. Our override did not mark the listingblock with
the "monospaced" class.
The main output that uses docbook as an intermediate format
is the manpages. We didn't notice any issue there because
the monospaced class seems to be ignored when generating
roff from the docbook manpages.
However, when generating texinfo to make info pages, docbook
does respect this class. The resulting texinfo output
properly uses "@example" blocks to display the listing in
this case. Besides possibly looking prettier in some texinfo
backends, one important effect is that the monospace font
suppresses texinfo's expansion of "--" and "---" into
en-dashes and em-dashes. With the current code, the example
above ends up looking like "git log -merge", which is
confusing and wrong.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit fe77b41 introduced a new attribute to let the linkgit macro
create cross-directory HTML references from the technical/ and howto/
subdirectories back to the main documentation. We define that attribute
to "../" on the command-line when building inside those subdirectories,
and otherwise leave it unset under the assumption that it would default
to being blank. Instead, asciidoc omits the link entirely, leading to
broken documentation. Fix this by defining git-relative-html-prefix to
blank in asciidoc.conf (and an instance on the command-line, when
present, will override it).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of our documentation is in a single directory, so using
linkgit:git-config[1] just generates a relative link in the
same directory. However, this is not the case with the API
documentation in technical/*, which need to refer to
git-config from the parent directory.
We can fix this by passing a special prefix attribute when building
in a subdirectory, and respecting that prefix in our linkgit
definitions.
We only have to modify the html linkgit definition. For
manpages, we can ignore this for two reasons:
1. we do not generate actual links to the file in
manpages, but instead just give the name and section of
the linked manpage
2. we do not currently build manpages for subdirectories,
only html
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Older versions of AsciiDoc used to literally pass double dashes when we
used them in our linkgit macros and manpage titles, but newer ones (the
issue was first reported with AsciiDoc 8.5.2) turn them into em dashes.
Define litdd (literal double-dash) custom attribute in asciidoc.conf to
work this around. While we are at it, fix a few double-dashes (e.g. the
description of "project--devo--version" convention used by tla, among
other things) that used to be incorrectly written as em dashes in the body
text to also use this attribute.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I am not sure why, but the regular expression "(?:\^\{\})" gets
rendered by asciidoc as "(?:\{})". The intent seems to be a regex
matching the literal string "^{}", so this rewrites the markup to
produce "(?:\^{})" as output.
Cc: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current output (with Asciidoc 8.5.2) seems a bit broken:
given two directories ‘d` and d2, there is a difference
between using git rm 'd*’ and ‘git rm 'd/\*\’`, as the
former will also remove all of directory d2.
In other words, the markup parses as
given two directories << d` and _d2_, there is a difference
between using _git rm 'd* >>_ and << git rm 'd/\*\ >> `.
I suspect there is an asciidoc bug involved (why is ' a candidate
closing-quote mark when it is preceded by a backslash?) but with
all the meanings of ` and ' involved I do not want to track it
down. Better to use unambiguous {asterisk} and {apostrophe}
entities.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Backtick and apostrophe are asciidoc markup, so they should be escaped
in order to get the expected result in the rendered manual page.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No files use the variant of block-title with verse-block, but
such a case would have generated broken docbook XML (<simpara> is
not allowed inside <para>). This fixes the potential deviation from
valid docbook XML.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the docbook-xsl-no-raw-roff variant match the
no-docbook-xsl-no-raw-roff variant in terms of which XML tag is
used to wrap listing block text (delimited with lines of dashes).
e920b56 (Tweak asciidoc output to work with broken docbook-xsl,
2006-03-05) says docbook-xsl 1.68 needs <literallayout>. This
<screen> usages was in the old, 1.72-only section. But since it
is now the "roff-less" section, it probably makes sense to make it
symmetric with the "roff-ful" section.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It seems that the ability to use raw roff codes in asciidoc.conf
was eliminated by docbook-xsl 1.72.0 _and later_. Unlike the
1.72.0-specific XSLT problem, this behavior was not reverted in
later releases.
This patch aims to make it clear that the affected asciidoc
attribute (flag) can be reasonably used with docbook-xsl versions
other than 1.72.0.
Also, document which make variables should be set for various
versions of asciidoc and docbook-xsl.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Starting with asciidoc 8.3.0 linkgit macro is no longer recognized by
asciidoc and user guide suggests
(http://www.methods.co.nz/asciidoc/userguide.html#_macro_definitions)
that macros are supposed to be defined in [macros] section. I'm not
sure whether undefined linkgit macro was working by pure chance or it
is a regression in asciidoc 8.3.0, but this patch adds proper
definition for the linkgit macro, allowing it to work on 8.3.0.
Signed-off-by: Alexey Borzenkov <snaury@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Insert an empty <simpara> in manpages after code blocks to force and
empty line.
The problem can be seen on the manpage for the git tutorial, where an
example command and the following paragraph is printed with no empty
line between them:
First, note that you can get documentation for a command such as git
log --graph with:
$ man git-log
It is a good idea to introduce yourself to git [...]
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As announced for 1.6.0.
Git older than version 1.5.2 (or any other git version with this option
set to 1) may revert to version 1 of the pack index by manually deleting
all .idx files and recreating them using 'git index-pack'. Communication
over the git native protocol is unaffected since the pack index is never
transferred.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
From version 1.72 it will replace all dots in roff requests with U+2302
("house" character), and add escaping in output for all instances of dot
that are not in roff requests. This caused the ".ft" hack forcing
monospace font in listingblocks to end up as "\&.ft" and being visible
in the resulting man page.
The fix adds a DOCBOOK_XSL_172 build variable that will disable the
hack. To allow this variable to be defined in config.mak it also moves
build variable handling below the inclusion of config.mak.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the html output we can use a stylesheet to make sure that the
listingblocks are presented in a monospaced font. For the manpages do
it manually by inserting a ".ft C" before and ".ft" after the block in
question.
In order for these roff commands to get through to the manpage they
have to be element encoded to prevent quoting.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It turns out that the attribute definition we have had for a
long time to hide "^" character from AsciiDoc 7 was not honored
by AsciiDoc 8 even under "-a asciidoc7compatible" mode. There is
a similar breakage with the "compatible" mode with + characters.
The double colon at the end of definition list term needs
to be attached to the term, without a whitespace. After this
minimum fixups, AsciiDoc 8 (I used 8.2.1 on Debian) with
compatibility mode seems to produce reasonably good results.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using sed on the resulting file, we now have a
git_version asciidoc attribute. This means that we don't
pipe the output of asciidoc, which means we can detect build
failures.
Problem reported by Scott Lamb, solution suggested by Jonas Fonseca.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The previous one broke generated xml files for anything but manpages,
as it took the header for manpage unconditionally. This fixes it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Override the [header] macro of asciidoc's docbook
backend to add version information to the generated
man pages.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fixes a failure to build the git-rev-parse manpage, seen with
asciidoc 8.0.0
We would love to use nicer quoting $$~$$ but alas asciidoc 7
does not know about it. So use asciidoc.conf and define {tilde}
to be ~.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
This changes "[user@]" to use {startsb} and {endsb} to insert [ and ],
similar to how {caret} is used in git-rev-parse.txt.
[jc: Removed a well-intentioned comment that broke the final
formatting from the original patch. While we are at it,
updated the paragraph that claims to be equivalent to the
section that was updated earlier without making matching
changes.]
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
docbook-xsl v1.68 incorrectly converts "<screen>" from docbook to
manpage by not rendering it verbatim. v1.69 handles it correctly, but
not many current popular distributions ship with it.
asciidoc by default converts "listingblock" to "<screen>". This change
causes asciidoc in git to convert "listingblock" to "<literallayout>", which
both old and new docbook-xsl handle correctly.
The difference can be seen in any manpage which includes a multi-line
example, such as git-branch.
[jc: the original patch was an disaster for html backends, so I made
it apply only to docbook backends. ]
Signed-off-by: Junio C Hamano <junkio@cox.net>
Introduce an asciidoc.conf file with the purpose of adding a gitlink:
macro which will improve the manpage output.
Original cogito patch by Jonas Fonseca <fonseca@diku.dk>;
asciidoc.conf from that patch was further enhanced to use the proper
DocBook tag <citerefentry> for references to man pages.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Martin Ågren
Thomas Ackermann
Junio C Hamano
Jeff King
Jonathan Nieder
Miklos Vajna
Chris Johnsen
Alexey Borzenkov
Jonas Fonseca
Nicolas Pitre
Dan McGee
Julian Phillips
Junio C Hamano
Frank Lichtenheld
Francis Daly
Sergey Vlasov