In other words, use fast-export --use-done-feature to add a 'done'
command at the end of streams passed to remote helpers' "import"
commands, and teach the remote helpers implementing "export" to use
the 'done' command in turn when producing their streams.
The trailing \n in the protocol signals the helper that the
connection is about to close, allowing it to do whatever cleanup
neccesary.
Previously, the connection would already be closed by the
time the trailing \n was to be written. Now that the remote-helper
protocol uses the new done command in its fast-import streams, this
is no longer the case and we can safely write the trailing \n.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously the status code of all helpers were ignored, allowing
errors that occur to go unnoticed if the error text output by the
helper is not noticed.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The update ref status part of push is useful for the export command
as well, factor it out into it's own function.
Also factor out push_update_ref_status to avoid a long loop without
an explicit condition with a non-trivial body.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If fast-export is being used to generate a fast-import stream that
will be used afterwards it is desirable to indicate the end of the
stream with the new 'done' command.
Add a flag that causes fast-export to end with 'done'.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a 'done' command that causes fast-import to stop reading from the
stream and exit.
If the new --done command line flag was passed on the command line
(or a "feature done" declaration included at the start of the stream),
make the 'done' command mandatory. So "git fast-import --done"'s
input format will be prefix-free, making errors easier to detect when
they show up as early termination at some convenient time of the
upstream of a pipe writing to fast-import.
Another possible application of the 'done' command would to be allow a
fast-import stream that is only a small part of a larger encapsulating
stream to be easily parsed, leaving the file offset after the "done\n"
so the other application can pick up from there. This patch does not
teach fast-import to do that --- fast-import still uses buffered input
(stdio).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If fast-export did not complete successfully the error handling code
itself would error out.
This was broken in commit 23b093ee0 (Brandon Casey, Wed Jun 9 2010,
Remove python 2.5'isms). Revert that commit an introduce our own copy
of check_call in util.py instead.
Tested by changing 'if retcode' to 'if not retcode' temporarily.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Trying to push for local repositories will fail since there is no
local checkout in .git/info/... to push from as that is only used for
non-local repositories (local repositories are pushed to directly).
This went unnoticed because the transport helper infrastructure does
not check the return value of the helper.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This went unnoticed because the transport helper infrastructore did
not check the return value of the helper, nor did the helper print
anything before exiting.
While at it also make sure that the stream doesn't end unexpectedly.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The gitdir capability is recognized by git and can be used to tell
the helper where the .git directory is. But it is not mentioned in
the documentation and considered worse than if gitdir was passed
via GIT_DIR environment variable.
Remove support for the gitdir capability and export GIT_DIR instead.
Teach testgit to use env instead of the now-removed gitdir command.
[sr: fixed up documentation]
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a remote helper exports to a non-local git repo, the
steps are roughly:
1. fast-export into a local staging area; the set of
interesting refs is defined by what is in the fast-export
stream
2. git push from the staging area to the non-local repo
In the second step, we should explicitly push all refs, not
just matching ones. This will let us push refs that do not
yet exist in the remote repo.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we want to push to a remote helper that has the
"export" capability, we collect all of the refs we want to
push and then feed them to fast-export.
However, the list of refs is actually a list of remote refs,
not local refs. The mapped local refs are included via the
peer_ref pointer. So when we add an argument to our
fast-export command line, we must be sure to use the local
peer_ref name (and if there is no local name, it is because
we are not actually sending that ref, or we may not even
have the ref at all).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Upon receiving an "import" command, the testgit remote
helper would ignore the ref asked for by git and generate a
fast-export stream based on HEAD. Instead, we should
actually give git the ref it asked for.
This requires adding a new parameter to the export_repo
method in the remote-helpers python library, which may be
used by code outside of git.git. We use a default parameter
so that callers without the new parameter will get the same
behavior as before.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are all things one might expect to work in a helper
that is capable of handling multiple branches (which our
testgit helper in theory should be able to do, as it is
backed by git). All of these bugs are specific to the
import/export codepaths, so they don't affect helpers like
git-remote-curl that use fetch/push commands.
The first and fourth tests are about fetching and pushing
new refs, and demonstrate bugs in the git_remote_helpers
library (so they would be most likely to impact helpers for
other VCSs which import/export git).
The second test is about importing multiple refs; it
demonstrates a bug in git-remote-testgit, which is mostly
for exercising the test code. Therefore it probably doesn't
affect anyone in practice.
The third test demonstrates a bug in git's side of the
helper code when the upstream has added refs that we do not
have locally. This could impact git users who use remote
helpers to access foreign VCSs.
All of those bugs have fixes later in this series.
The fifth test is the most complex, and does not have a fix
in this series. It tests pushing a ref via the export
mechanism to a new name on the remote side (i.e.,
"git push $remote old:new").
The problem is that we push all of the work of generating
the export stream onto fast-export, but we have no way of
communicating to fast-export that this name mapping is
happening. So we tell fast-export to generate a stream with
the commits for "old", but we can't tell it to label them
all as "new".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All tests require python 2.4 or higher.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are a little hard to read, and I'm about to add more
just like them. Plus the failure output is nicer if we use
test_cmp than a comparison with "test".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/gitweb-docs:
gitweb: Move "Requirements" up in gitweb/INSTALL
gitweb: Describe CSSMIN and JSMIN in gitweb/INSTALL
gitweb: Move information about installation from README to INSTALL
* bc/maint-status-z-to-use-porcelain:
builtin/commit.c: set status_format _after_ option parsing
t7508: demonstrate status's failure to use --porcelain format with -z
Conflicts:
builtin/commit.c
With XSS prevention on (enabled using $prevent_xss), blobs
('blob_plain') of all types except a few known safe ones are served
with "Content-Disposition: attachment". However the check was too
strict; it didn't take into account optional parameter attributes,
media-type = type "/" subtype *( ";" parameter )
as described in RFC 2616
http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.17http://www.w3.org/Protocols/rfc2616/rfc2616-sec3.html#sec3.7
This fixes that, and it for example treats following as safe MIME
media type:
text/plain; charset=utf-8
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This way you can examine prerequisites at first glance, before
detailed instructions on installing gitweb. Straightforward
text movement.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The build-time configuration variables JSMIN and CSSMIN were mentioned
only in Makefile; add their description to gitweb/INSTALL.
This required moving description of GITWEB_JS up, near GITWEB_CSS and
just introduced CSMIN and JSMIN.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Almost straightformard moving of "How to configure gitweb for your
local system" section from gitweb/README to gitweb/INSTALL, as it is
about build time configuration. Updated references to it.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/maint-config-alias-fix:
handle_options(): do not miscount how many arguments were used
config: always parse GIT_CONFIG_PARAMETERS during git_config
git_config: don't peek at global config_parameters
config: make environment parsing routines static
* jk/maint-docs:
docs: fix some antique example output
docs: make sure literal "->" isn't converted to arrow
docs: update status --porcelain format
docs: minor grammar fixes to git-status
Since 9d8a5a5 (diffcore-rename: refactor "too many candidates" logic,
2011-01-06), diffcore_rename() initializes num_src but does not use it
anymore. "-Wunused-but-set-variable" in gcc-4.6 complains about this.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/format-patch-am:
format-patch: preserve subject newlines with -k
clean up calling conventions for pretty.c functions
pretty: add pp_commit_easy function for simple callers
mailinfo: always clean up rfc822 header folding
t: test subject handling in format-patch / am pipeline
Conflicts:
builtin/branch.c
builtin/log.c
commit.h
* jk/maint-docs:
docs: fix some antique example output
docs: make sure literal "->" isn't converted to arrow
docs: update status --porcelain format
docs: minor grammar fixes to git-status
* vh/config-interactive-singlekey-doc:
git-reset.txt: better docs for '--patch'
git-checkout.txt: better docs for '--patch'
git-stash.txt: better docs for '--patch'
git-add.txt: document 'interactive.singlekey'
config.txt: 'interactive.singlekey; is used by...
* ab/i18n-fixup: (24 commits)
i18n: use test_i18n{cmp,grep} in t7600, t7607, t7611 and t7811
i18n: use test_i18n{grep,cmp} in t7508
i18n: use test_i18ngrep in t7506
i18n: use test_i18ngrep and test_i18ncmp in t7502
i18n: use test_i18ngrep in t7501
i18n: use test_i18ncmp in t7500
i18n: use test_i18ngrep in t7201
i18n: use test_i18ncmp and test_i18ngrep in t7102 and t7110
i18n: use test_i18ncmp and test_i18ngrep in t5541, t6040, t6120, t7004, t7012 and t7060
i18n: use test_i18ncmp and test_i18ngrep in t3700, t4001 and t4014
i18n: use test_i18ncmp and test_i18ngrep in t3203, t3501 and t3507
i18n: use test_i18ngrep in t2020, t2204, t3030, and t3200
i18n: use test_i18ngrep in lib-httpd and t2019
i18n: do not overuse C_LOCALE_OUTPUT (grep)
i18n: use test_i18ncmp in t1200 and t2200
i18n: .git file is not a human readable message (t5601)
i18n: do not overuse C_LOCALE_OUTPUT
i18n: mark init-db messages for translation
i18n: mark checkout plural warning for translation
i18n: mark checkout --detach messages for translation
...
Sverre Rabbelier
Dmitry Ivankov
Jeff King
Junio C Hamano
Jakub Narebski
Jim Meyering