* jc/checkout-merge-base:
rebase -i: teach --onto A...B syntax
rebase: fix --onto A...B parsing and add tests
"rebase --onto A...B" replays history on the merge base between A and B
"checkout A...B" switches to the merge base between A and B
* il/vcs-helper:
Reset possible helper before reusing remote structure
Remove special casing of http, https and ftp
Support remote archive from all smart transports
Support remote helpers implementing smart transports
Support taking over transports
Refactor git transport options parsing
Pass unknown protocols to external protocol handlers
Support mandatory capabilities
Add remote helper debug mode
Conflicts:
Documentation/git-remote-helpers.txt
transport-helper.c
* cc/reset-more:
t7111: check that reset options work as described in the tables
Documentation: reset: add some missing tables
Fix bit assignment for CE_CONFLICTED
"reset --merge": fix unmerged case
reset: use "unpack_trees()" directly instead of "git read-tree"
reset: add a few tests for "git reset --merge"
Documentation: reset: add some tables to describe the different options
reset: improve mixed reset error message when in a bare repo
* nd/sparse: (25 commits)
t7002: test for not using external grep on skip-worktree paths
t7002: set test prerequisite "external-grep" if supported
grep: do not do external grep on skip-worktree entries
commit: correctly respect skip-worktree bit
ie_match_stat(): do not ignore skip-worktree bit with CE_MATCH_IGNORE_VALID
tests: rename duplicate t1009
sparse checkout: inhibit empty worktree
Add tests for sparse checkout
read-tree: add --no-sparse-checkout to disable sparse checkout support
unpack-trees(): ignore worktree check outside checkout area
unpack_trees(): apply $GIT_DIR/info/sparse-checkout to the final index
unpack-trees(): "enable" sparse checkout and load $GIT_DIR/info/sparse-checkout
unpack-trees.c: generalize verify_* functions
unpack-trees(): add CE_WT_REMOVE to remove on worktree alone
Introduce "sparse checkout"
dir.c: export excluded_1() and add_excludes_from_file_1()
excluded_1(): support exclude files in index
unpack-trees(): carry skip-worktree bit over in merged_entry()
Read .gitignore from index if it is skip-worktree
Avoid writing to buffer in add_excludes_from_file_1()
...
Conflicts:
.gitignore
Documentation/config.txt
Documentation/git-update-index.txt
Makefile
entry.c
t/t7002-grep.sh
* maint:
remote-curl: Fix Accept header for smart HTTP connections
grep: -L should show empty files
rebase--interactive: Ignore comments and blank lines in peek_next_command
When calling a git command from a subdirectory and a file locking fails,
the user will get a path relative to the root of the worktree, which is
invalid from the place where the command is ran. Make it easy for the
user to know which file it is.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This script passes the author and committer to git-commit via environment
variables, but it was missing the seccond T of COMMITTER in a few places.
Signed-off-by: Bart Trojanowski <bart@jukie.net>
Acked-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We actually expect to see an application/x-git-upload-pack-result
but we lied and said we Accept *-response. This was a typo on my
part when I was writing the code.
Fortunately the wrong Accept header had no real impact, as the
deployed git-http-backend servers were not testing the Accept
header before they returned their content.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The -L (--files-without-match) option is supposed to show paths that
produced no matches. When running the internal grep on work tree files,
however, we had an optimization to just return on zero-sized files,
without doing anything.
This optimization doesn't matter too much in practice (a tracked empty
file must be rare, or there is something wrong with your project); to
produce results consistent with GNU grep, we should stop the optimization
and show empty files as not having the given pattern.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error message in case of non-fast forward points to 'git push
--help', but used to talk about a section 'non-fast-forward', while the
actual section name is 'Note about fast-forwards'.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, blank lines and/or comments within a series of
squash/fixup commands would confuse "git rebase -i" into thinking that
the series was finished. It would therefore require the user to edit
the commit message for the squash/fixup commits seen so far. Then,
after continuing, it would ask the user to edit the commit message
again.
Ignore comments and blank lines within a group of squash/fixup
commands, allowing them to be processed in one go.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/http-updates:
Remove http.authAny
Allow curl to rewind the RPC read buffer
Add an option for using any HTTP authentication scheme, not only basic
http: maintain curl sessions
* maint:
base85: Make the code more obvious instead of explaining the non-obvious
base85: encode_85() does not use the decode table
base85 debug code: Fix length byte calculation
Documentation: tiny git config manual tweaks
Documentation: git gc packs refs by default now
checkout -m: do not try to fall back to --merge from an unborn branch
* maint-1.6.2:
base85: Make the code more obvious instead of explaining the non-obvious
base85: encode_85() does not use the decode table
base85 debug code: Fix length byte calculation
checkout -m: do not try to fall back to --merge from an unborn branch
Conflicts:
diff.c
* maint-1.6.1:
base85: Make the code more obvious instead of explaining the non-obvious
base85: encode_85() does not use the decode table
base85 debug code: Fix length byte calculation
checkout -m: do not try to fall back to --merge from an unborn branch
branch: die explicitly why when calling "git branch [-a|-r] branchname".
textconv: stop leaking file descriptors
commit: --cleanup is a message option
git count-objects: handle packs bigger than 4G
t7102: make the test fail if one of its check fails
Conflicts:
diff.c
* maint-1.6.0:
base85: Make the code more obvious instead of explaining the non-obvious
base85: encode_85() does not use the decode table
base85 debug code: Fix length byte calculation
checkout -m: do not try to fall back to --merge from an unborn branch
branch: die explicitly why when calling "git branch [-a|-r] branchname".
kill_some_child() compares the entire sockaddr_storage
structure (with the pad-bits zeroed out) when trying to
find out if connections originate from the same host.
However, sockaddr_storage contains the port-number for
the connection (which varies between connections), so
the comparison always fails.
Change the code so we only consider the host-address,
by introducing the addrcmp()-function that inspects
the address family and compare as appropriate.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit 7c3baa9 (help -a: do not unnecessarily look for a
repository, 2009-09-04), the help format that is passed as a
command line option is not used if an help format has been
configured. This patch fixes that.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some previous patches added some tables to the "git reset"
documentation. These tables describe the behavior of "git reset"
depending on the option it is passed and the state of the files
in the working tree, the index, HEAD and the target commit.
This patch adds some tests to make sure that the tables describe
the behavior of "git reset".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a verb, 'setup' is spelled 'set up'. “diff commands such as
diff-files” scans better without a comma. Clarify that shallow
and deep are special non-boolean values for format.thread rather
than boolean values with some other name.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 56752391 (Make "git gc" pack all refs by default,
2007-05-24), 'git gc' was changed to run pack-refs by default
Versions before v1.5.1.2 cannot clone repos with packed refs over
http, and versions before v1.4.4 cannot handled packed refs at
all, but more recent git should have no problems. Try to make
this more clear in the git-config manual.
The analagous passage in git-gc.txt was updated already with
commit fe2128a (Change git-gc documentation to reflect
gc.packrefs implementation., 2008-01-09).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If one had multiple URLs configured for remote with previous one
having forced helper but the subsequent one not, like:
url = foo::bar://baz
url = ssh://example/example.git
Then the subsequent URL is passed to foo helper, which isn't
correct. Fix it to be parsed normally by resetting foreign VCS
name before parsing the URL protocol.
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sb/maint-octopus:
octopus: remove dead code
octopus: reenable fast-forward merges
octopus: make merge process simpler to follow
Conflicts:
git-merge-octopus.sh
* bg/maint-add-all-doc:
git-rm doc: Describe how to sync index & work tree
git-add/rm doc: Consistently back-quote
Documentation: 'git add -A' can remove files
Newcomers to git that want to remove from the index only the
files that have disappeared from the working tree will probably
look for a way to do that in the documentation for 'git rm'.
Therefore, describe how that can be done (even though it involves
other commands than 'git rm'). Based on a suggestion by Junio,
but re-arranged and rewritten to better fit into the style of
command reference.
While at it, change a single occurrence of "work tree" to "working
tree" for consistency.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mo/bin-wrappers:
INSTALL: document a simpler way to run uninstalled builds
run test suite without dashed git-commands in PATH
build dashless "bin-wrappers" directory similar to installed bindir
When rewriting commits on a topic branch, sometimes it is easier to
compare the version of commits before and after the rewrite if they are
based on the same commit that forked from the upstream. An earlier commit
by Junio (fixed up by the previous commit) gives "--onto A...B" syntax to
rebase command, and rebases on top of the merge base between A and B;
teach the same to the interactive version, too.
Signed-off-by: しらいし ななこ <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous patch didn't parse "rebase --onto A...B" correctly when A
isn't an empty string. It also tried to be careful to notice a case in
which there are more than one merge bases, but forgot to give --all option
to merge-base, making the test pointless.
Fix these problems and add a test script to verify. Improvements to the
script to parse A...B syntax was taken from review comments by Johannes
Schindelin.
Signed-off-by: しらいし ななこ <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If switching from an unborn branch (= empty tree) to a valid commit failed
without -m, it would fail with -m option as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add another test to set prerequisite EXTGREP if the current build supports
external grep. This can be used to skip external grep only tests on builds
that do not support this optimization.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Matthieu Moy
Bart Trojanowski
Shawn O. Pearce
Michael Haggerty
Erik Faye-Lund
Christian Couder
Thiago Farina
Andreas Gruenbacher
Jonathan Nieder
Ilari Liusvaara
Björn Gustavsson
Nanako Shiraishi
Nguyễn Thái Ngọc Duy