After running the valgrind tests with GIT_TEST_TREE=t, the test output
is in the test-results/$TEST.out files.
Call ./valgrind/analyze.sh in $GIT_ROOT/t/ to group the valgrind errors
by backtrace.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is easy to forget running valgrinded tests without -v, and it is
also easy to forget to redirect the output to "tee" (lest the output
scroll out of the terminal's buffer). Running "make valgrind" will
take care of all that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When tests are run in parallel and a few tests fail, it does not help
that the output of the terminal is totally confusing, as you rarely know
which test which line came from.
So introduce the option '--tee' which triggers that the output of the
tests will be written to t/test-results/$TEST.out in addition to the
terminal, where $TEST is the basename of the script.
Unfortunately, there seems to be no way to redirect a given file
descriptor to a specified subprocess in POSIX shell, only redirection
to a file is supported via 'exec > $FILE'.
At least with bash, one might think that 'exec >($COMMAND)' would work
as intended, but it does not.
The common way to work around the lack of proper tools support is to
work with named pipes, alas, one of our most beloved platforms does not
really support named pipes. Besides, we would need a pipe for every
script, as the whole point of this patch is to allow parallel execution.
Therefore, we handle the redirection in the following way: when '--tee'
was passed to the test script, the variable GIT_TEST_TEE_STARTED is set
(to avoid triggering that code path again) and the script is started
_again_, in a subshell, redirected to the command "tee".
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch makes --valgrind try to override _all_ Git binaries in the
PATH, and it makes it an error to call *.sh and *.perl scripts directly.
While it is not strictly necessary to look through the whole PATH to
find git binaries to override, it is in line with running an expensive
test (which valgrind is) to make extra sure that only binaries are
tested that actually come from the git.git checkout.
In the same spirit, we can test that neither our test suite nor our
scripts try to run the *.sh or *.perl scripts directly.
It's more like a "because we can" than a "this is tightly connected
to valgrind", but in the author's opinion "because we can" is "so we
should" in this case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On some Linux systems, we get a host of Cond and Addr errors
from calls to dlopen that are caused by nss modules. We
should be able to safely ignore anything happening in
ld-*.so as "not our problem."
[Johannes: I added some more... unfortunately using valgrind 3.4.0 syntax]
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds the ability to use valgrind's memcheck tool to
diagnose memory problems in Git while running the test scripts.
It requires valgrind 3.4.0 or newer.
It works by creating symlinks to a valgrind script, which have the same
name as our Git binaries, and then putting that directory in front of
the test script's PATH as well as set GIT_EXEC_PATH to that directory.
Git scripts are symlinked from that directory directly.
That way, Git binaries called by Git scripts are valgrinded, too.
Valgrind can be used by specifying "GIT_TEST_OPTS=--valgrind" in the
make invocation. Any invocation of git that finds any errors under
valgrind will exit with failure code 126. Any valgrind output will go
to the usual stderr channel for tests (i.e., /dev/null, unless -v has
been specified).
If you need to pass options to valgrind -- you might want to run
another tool than memcheck, for example -- you can set the environment
variable GIT_VALGRIND_OPTIONS.
A few default suppressions are included, since libz seems to trigger
quite a few false positives. We'll assume that libz works and that we
can ignore any errors which are reported there.
Note: it is safe to run the valgrind tests in parallel, as the links in
t/valgrind/bin/ are created using proper locking.
Initial patch and all the hard work by Jeff King.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brian Gernhardt noticed that t3411 was broken recently on case insensitive
filesystems.
0088496 (test-lib.sh: introduce test_commit() and test_merge() helpers,
2009-01-27) used a tag and a file with the same name, only different in
case, and converted many existing tests that needed only a file (or a
tag).
Some tests may want to refer to a rev or a file, but on a filesystem that
loses cases, referring to either without disambiguation mark ("--") on the
command line now triggers an error (t3411 was the only one such test).
Fix it by using a filename that is different from the tagname each step
creates.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2182896 (t3412: clean up GIT_EDITOR usage, 2009-01-30) tried to clean up
the script's use of GIT_EDITOR, but it can further be simplified, because
that is how test-lib.sh sets things up already.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace all 'git log --graph' calls for history verification with the
combination of 'git log ...| git name-rev' first introduced by a6c7a27
(rebase -i: correctly remember --root flag across --continue,
2009-01-26). This should be less susceptible to format changes than
the --graph code.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One had to configure gitweb for it to find static files (stylesheets,
images) when using path_info URLs. Now that it is not necessary
thanks to adding BASE element to HTML head if needed, update README to
reflect this fact.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
currently for cases like
From: A U Thor <a.u.thor@example.com> (Comment)
mailinfo extracts the following 'Author:' field:
Author: A U Thor (Comment)
^^
which has two extra spaces left in there after removed email part.
I think this is wrong so here is a fix.
Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ks/maint-mailinfo-folded:
mailinfo: tests for RFC2047 examples
mailinfo: add explicit test for mails like '<a.u.thor@example.com> (A U Thor)'
mailinfo: 'From:' header should be unfold as well
mailinfo: correctly handle multiline 'Subject:' header
* sp/runtime-prefix:
Windows: Revert to default paths and convert them by RUNTIME_PREFIX
Compute prefix at runtime if RUNTIME_PREFIX is set
Modify setup_path() to only add git_exec_path() to PATH
Add calls to git_extract_argv0_path() in programs that call git_config_*
git_extract_argv0_path(): Move check for valid argv0 from caller to callee
Refactor git_set_argv0_path() to git_extract_argv0_path()
Move computation of absolute paths from Makefile to runtime (in preparation for RUNTIME_PREFIX)
* jk/signal-cleanup:
t0005: use SIGTERM for sigchain test
pager: do wait_for_pager on signal death
refactor signal handling for cleanup functions
chain kill signals for cleanup functions
diff: refactor tempfile cleanup handling
Windows: Fix signal numbers
git difftool listed some candidates for mergetools twice, depending on
the environment.
This slightly changes the behavior when both KDE_FULL_SESSION and
GNOME_DESKTOP_SESSION_ID are set at the same time; in such a case
meld is used in favor of kdiff3 (the old code favored kdiff3 in such a
case), but it should not matter in practice.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Acked-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parameter n of unpack_callback() can have a value of up to
MAX_UNPACK_TREES. The check at the top of unpack_trees() (its only
(indirect) caller) makes sure it cannot exceed this limit.
unpack_callback() passes it and the array src to unpack_nondirectories(),
which has this loop:
for (i = 0; i < n; i++) {
/* ... */
src[i + o->merge] = o->df_conflict_entry;
o->merge can be 0 or 1, so unpack_nondirectories() potentially accesses
the array src at index MAX_UNPACK_TREES. This patch makes it big enough.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
a6c7a27 (rebase -i: correctly remember --root flag across --continue,
2009-01-26) introduced a more portable GIT_EDITOR usage, but left the
old tests unchanged.
Since we never use the editor (all tests run the rebase script as
proposed by rebase -i), just disable it outright, which simplifies the
tests.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the example, Joe Developer has <joe@example.com> as his email,
but in the .mailmap is <joe@random.com>. Use example.com instead.
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CVS server was running the hook before the update action was
actually done. This performs the update before the hook is called.
The original commit that introduced the current incorrect behavior
was 394d66d "git-cvsserver runs hooks/post-update". The error in
ordering of the hook call appears to have gone unnoticed, but since
git-cvsserver is supposed to emulate receive-pack, it stands to
reason that the hook should be run *after* the update. Since this
behavior is inconsistent with recieve-pack, users are either:
1) not using post-update hooks with git-cvsserver;
2) using post-update hooks that don't care whether they are
called before or after the actual update occurs;
3) using post-update hooks *only* with git-cvsserver, and
relying on the hook being called just before the update.
This patch would affect only users in case 3. These users are
depending on fairly obviously wrong behavior, and moreover they can
simply change their current post-update into post-recieve hooks,
and their systems will work correctly again.
Signed-off-by: Stefan Karpinski <stefan.karpinski@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When trying to find out mode changes, we should not access the symlink
targets using stat(); instead we use lstat() so that the diff does
not fail trying to find a non-existing symlink target.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document some possible Apache configurations when the path_info feature
is enabled in gitweb.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gitweb links to a number of static files such as CSS stylesheets,
favicon or the git logo. When, such as with the default Makefile, the
paths to these files are relative (i.e. doesn't start with a "/"), the
files become inaccessible in any view other tha project list and summary
page if gitweb is invoked with a non-empty PATH_INFO.
Fix this by adding a <base> element pointing to the script's own URL,
which ensure that all relative paths will be resolved correctly.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The CVS protocol documentation, found at
http://www.wandisco.com/techpubs/cvs-protocol.pdf
states the following about the 'noop' command:
Response expected: yes. This request is a null command
in the sense that it doesn't do anything, but merely
(as with any other requests expecting a response) sends
back any responses pertaining to pending errors, pending
Notified responses, etc.
In accordance with this, the correct way to handle the 'noop'
command, when issued by a client, is to call req_EMPTY.
The 'noop' command is called by some CVS clients, notably
TortoiseCVS, thus making it desirable for git-cvsserver to
respond to the command rather than choking on it as unknown.
Signed-off-by: Stefan Karpinski <stefan.karpinski@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The signal tests consists of checking that each of our
handlers is executed, and that the test program was killed
by the final signal. We arbitrarily used SIGINT as the kill
signal.
However, some platforms (notably Solaris) will default
SIGINT to SIG_IGN if there is no controlling terminal. In
that case, we don't end up killing the program with the
final signal and the test fails.
This is a problem since the test script should not depend
on outside factors; let's use SIGTERM instead, which should
behave consistently.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin
Jeff King
Junio C Hamano
Thomas Rast
Jakub Narebski
Kirill Smelkov
David Aguilar
Markus Heidelberg
René Scharfe
Michele Ballabio
Stefan Karpinski
Giuseppe Bilotta