* ar/unlink-err:
print unlink(2) errno in copy_or_link_directory
replace direct calls to unlink(2) with unlink_or_warn
Introduce an unlink(2) wrapper which gives warning if unlink failed
cat-file with an object on the command line requires an
option to tell it what to output (type, size, pretty-print,
etc). However, the square brackets in the usage imply that
those options are not required. This patch switches them to
parentheses to indicate "required but grouped-OR" (curly
braces might also work, but this follows the convention used
already by "git stash").
While we're at it, let's change the <sha1> specifier in the
usage to <object>. That's what the documentation uses, and
it does actually use the regular object lookup.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we fail to store a fetched ref, we recommend that the
user try running "git prune" to remove up any old refs that
have been deleted by the remote, which would clear up any DF
conflicts. However, ref storage might fail for other
reasons (e.g., permissions problems) in which case the
advice is useless and misleading.
This patch detects when there is an actual DF situation and
only issues the advice when one is found.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the ways that locking might fail is that there is a
DF conflict between two refs (e.g., you want to lock
"foo/bar" but "foo" already exists). In this case, we return
an error, but there is no way for the caller to know the
specific problem.
This patch sets errno to ENOTDIR, which is the most sensible
code. It's what we would see if the refs were stored purely
in the filesystem (but these days we must check the
namespace manually due to packed refs).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the --squash option, merge sets up the index just like for a real
merge, but without the merge info (stages). Say so.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Noticed and reported by Serhat Şevki Dinçer.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Acked-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As noticed by Dmitry Gryazin: When a pattern is found but it doesn't
start and end at word boundaries, bol is forwarded to after the match and
the pattern is searched again. When a pattern is finally found between
word boundaries, the match offsets are off by the number of characters
that have been skipped.
This patch corrects the offsets to be relative to the value of bol as
passed to match_one_pattern() by its caller.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Its check is more robust than a config check for core.bare
Trivially-Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You might end up with a situation where you have tons of pack files, e.g.
when using hg2git. In this situation, all kinds of operations may
end up with a "too many files open" error. Let's recover gracefully from
that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Looks-right-to-me-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can trigger a segfault in git.git by doing:
git for-each-ref --format='%(taggeremail)' refs/tags/v0.99
The v0.99 tag is special in that it contains no "tagger"
header.
The bug is obvious in copy_email, which carefully checks to
make sure the result of a strchr is non-NULL, but only after
already having used it to perform other work. The fix is to
move the check up.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 76a44c5 (show-branch --reflog: show the reflog message at the
top, 2007-01-19) introduced parse_reflog_param(). The die() call was
incorrectly passed arg + 9, when it should have been passed arg.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add --oneline and --abbrev-commit to show and --sparse to show-branch.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Right now we pass two different pathnames ('path' and 'base') down to
read_directory_recursive(), and the only real reason for that is that we
want to allow an empty 'base' parameter, but when we do so, we need the
pathname to "opendir()" to be "." rather than the empty string.
And rather than handle that confusion in the caller, we can just fix
read_directory_recursive() to handle the case of an empty path itself,
by just passing opendir() a "." ourselves if the path is empty.
This would allow us to then drop one of the pathnames entirely from the
calling convention, but rather than do that, we'll start separating them
out as a "filesystem pathname" (the one we use for filesystem accesses)
and a "git internal base name" (which is the name that we use for git
internally).
That will eventually allow us to do things like handle different
encodings (eg the filesystem pathnames might be Latin1, while git itself
would use UTF-8 for filename information).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In these two places we are casting part of our unsigned char sha1 array into
an unsigned int, which violates GCCs strict-aliasing rules (and probably
other compilers).
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce GIT_PS1_DESCRIBE option you can set to "contains", "branch", or
"describe" to tweak the way how a detached HEAD is described.
The default behaviour is to describe only exact match with some tag
(otherwise use the first 7 hexdigits) as before.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As I very often work on a detached HEAD, I found it pretty confusing
when __git_ps1() said 'some-name'. Did I create a branch with that name
by mistake, or do I happen to be on a commit with that exact tag?
This patch fixes the issue by enclosing non branch names in a pair of
parentheses when used to substitute %s token in __git_ps1() argument.
It also fixes a small bug where the branch part is left empty when
.git/HEAD is unreadable for whatever reason. The output now says
"(unknown)".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If your merge stops in a conflict while on a detached HEAD, recent
completion code fails to show anything. This was because various cases
added to support the operation-in-progress markers (e.g. REBASE, MERGING)
forgot that they need to set the variable "b" to something for the result
they computed to be displayed at all.
Probably not many people make trial merges on a detached HEAD (which is
tremendously useful feature of git, by the way), and that may be why this
was not noticed for a long time.
Acked-By: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, checkout would tell the user this message before moving HEAD,
without regard to whether the upcoming move will result in success.
If the move failed, this causes confusion.
Show the message after the move, unless the move failed.
Signed-off-by: Daniel Cordero <theappleman@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the sample pre-commit hook script discard
all git-rev-parse output, not just stderr.
Otherwise, it would print an SHA1.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Exercise format-patch's --signoff, --in-reply-to and --start-number long
options.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like Darwin, OpenBSD's stat struct uses st_ctimespec and st_mtimestruct
rather than st_ctim and st_mtim.
Signed-off-by: Tony Kemp <tony.kemp@newcastle.edu.au>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the installed programs are tar'ed up and installed on a system where
bin/ and libexec/git-core/ live on different file systems, we do not want
libexec/git-core/git-* to be hardlinks to bin/git.
Noticed by Cedric Staniewski.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic in 83ae209 (checkout branch: prime cache-tree fully,
2009-04-20) is bogus; checkout can switch branches with a dirty
index and in such a case the tree won't match HEAD.
Add t2014-switch to catch this breakage.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Such format relationships are very useful things to remember for
script writers.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Delayed negation in a statement is harder to spot and keep in mind.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you are trying to come up with the final result (i.e. depth=0), you
want to record how the conflict arose by registering the state of the
common ancestor, your branch and the other branch in the index, hence you
want to do update_stages().
When you are merging with positive depth, that is because of a criss-cross
merge situation. In such a case, you would need to record the tentative
result, with conflict markers and all, as if the merge went cleanly, even
if there are conflicts, in order to write it out as a tree object later to
be used as a common ancestor tree.
update_file() calls update_file_flags() with update_cache=1 to signal that
the result needs to be written to the index at stage #0 (i.e. merged), and
the code should not clobber the index further by calling update_stages().
The codepath to deal with rename/delete conflict in a recursive merge
however left the index unmerged.
Signed-off-by: Dave Olszewski <cxreg@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes git checkout know to use the threaded index preloading if it
is enabled in the config file. You need to have
[core]
preloadindex = true
in your config file to see it, and for that feature to make sense your
filesystem needs to be able to do concurrent 'lstat()' lookups, but when
that is the case (especially NFS over a high-latency network), this can
be a noticeable performance win.
But with a low-latency network and at least older Linux NFS clients, this
will clearly potentially cause a lot of lock contention. It may still
speed up the uncached case, but the threading and locking overhead will
result in the cached case likely slowing down.
That was almost certainly fixed by Linux commit fc0f684c2 ("NFS: Remove
BKL from NFS lookup code"), but that one got merged into 2.6.27-rc1, so
older kernel versions than 2.6.27 will not scale very well.
But regardless, it's the right thing to do. If your filesystem doesn't
scale, don't enable index preloading.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we ask get_stat_data() to get the mode and size of an index entry,
we can avoid the lstat() call if we have marked the index entry as being
uptodate due to earlier lstat() calls.
This avoids a lot of unnecessary lstat() calls in eg 'git checkout',
where the last phase shows the differences to the working tree
(requiring a diff), but earlier phases have already verified the index.
On the kernel repo (with a fast machine and everything cached), this
changes timings of a nul 'git checkout' from
- Before (best of ten):
0.14user 0.05system 0:00.19elapsed 100%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+13237minor)pagefaults 0swaps
- After
0.11user 0.03system 0:00.15elapsed 98%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+13235minor)pagefaults 0swaps
so it can obviously be noticeable, although equally obviously it's not a
show-stopper on this particular machine. The difference is likely larger
on slower machines, or with operating systems that don't do as good a job
of name caching.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We try to warn the user if one of their pathspecs caused no
matches, as it may have been a typo. However, we disable the
warning if the pathspec points to an existing file, since
that means it is not a typo but simply an empty directory.
Unfortunately, the file_exists() test was broken for one
special case: the pathspec of the project root is just "".
This patch detects this special case and acts as if the file
exists (which it must, since it is the project root).
The user-visible effect is that this:
$ mkdir repo && cd repo && git init && git add .
used to complain like:
fatal: pathspec '' did not match any files
but now is a silent no-op.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let a command-line --keep-subject (-k) override a config-specified
format.numbered (--numbered (-n)), rather than provoking the
"-n and -k are mutually exclusive" failure.
* t4021-format-patch-numbered.sh: Test for the above
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The alias argv comes from the split_cmdline function, which
splits the config text for the alias into an array of
strings. It returns the number of elements in the array, but
does not actually put a NULL at the end of the array.
Later, the trace function tries to print this argv and
assumes that it has the trailing NULL.
The split_cmdline function is probably at fault, since argv
lists almost always end with a NULL signal. This patch adds
one, in addition to the returned count; this doesn't hurt
the other callers at all, since they were presumably using
the count already (and will never look at the NULL).
While we're there and using ALLOC_GROW, let's clean up the
other manual grow.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Jeff King
Michael J Gruber
Alex Riesen
René Scharfe
Giuseppe Bilotta
Johannes Schindelin
Stephen Boyd
Linus Torvalds
Dan McGee
Nanako Shiraishi
Daniel Cordero
Jim Meyering
Tony Kemp
Dave Olszewski