"git diff --no-index" did not correctly handle relative paths and
did not correctly give exit codes when run under "--quiet" option.
* th/diff-no-index-fixes:
diff-no-index: exit(1) if 'diff --quiet <repo file> <external file>' finds changes
diff: handle relative paths in no-index
"git clone --single-branch" to clone a single branch did not limit
the cloning to the specified branch.
* nd/clone-single-fix:
clone: fix ref selection in --single-branch --branch=xxx
When "git log" gets "--simplify-merges/by-decoration" together with
"--first-parent", the combination of these options makes the
simplification logic to use in-core commit objects that haven't been
examined for relevance, either producing incorrect result or taking
too long to produce any output. Teach the simplification logic to
ignore commits that the first-parent traversal logic ignored when
both are in effect to work around the issue.
* jc/rev-list-simplify-merges-first-parent:
revision: ignore side parents while running simplify-merges
revision: note the lack of free() in simplify_merges()
revision: "simplify" options imply topo-order sort
"git add" allows adding a regular file to the path where a submodule
used to exist, but "git update-index" did not allow an equivalent
operation to Porcelain writers.
* hv/submodule-update-nuke-submodules:
update-index: allow overwriting existing submodule index entries
"git diff --no-index" did not work with pagers correctly.
* jk/diff-no-index-pager:
do not run pager with diff --no-index --quiet
fix pager.diff with diff --no-index
"git diff COPYING HEAD:COPYING" gave a nonsense error message that
claimed that the treeish HEAD did not have COPYING in it.
* mm/verify-filename-fix:
verify_filename(): ask the caller to chose the kind of diagnosis
sha1_name: do not trigger detailed diagnosis for file arguments
The documentation for "git cherry-pick A B..C" was misleading.
* cn/cherry-pick-range-docs:
git-cherry-pick.txt: clarify the use of revision range notation
Documentation: --no-walk is no-op if range is specified
"git archive" incorrectly computed the header checksum; the symptom
was observed only when using pathnames with hi-bit set.
* jc/ustar-checksum-is-unsigned:
archive: ustar header checksum is computed unsigned
Running "git bundle verify" on a bundle that records a complete
history said "it requires these 0 commits".
* jc/bundle-complete-notice:
tweak "bundle verify" of a complete history
"git ls-files --exclude=t -i" did not consider anything under t/ as
excluded, as it did not pay attention to exclusion of leading paths
while walking the index. Other two users of excluded() are also
updated.
* jc/ls-files-i-dir:
dir.c: make excluded() file scope static
unpack-trees.c: use path_excluded() in check_ok_to_remove()
builtin/add.c: use path_excluded()
path_excluded(): update API to less cache-entry centric
ls-files -i: micro-optimize path_excluded()
ls-files -i: pay attention to exclusion of leading paths
"git request-pull $url dev" when the tip of "dev" branch was tagged
with "ext4-for-linus" used the contents from the tag in the output
but still asked the "dev" branch to be pulled, not the tag.
* jc/request-pull-match-tagname:
request-pull: really favor a matching tag
The patch 8f0bef6 refactored this script and made the variable $fh
unneeded in subs diff_applies and patch_update_file, but forgot to
remove them.
Signed-off-by: Thomas Badie <badie@lrde.epita.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- do not fetch HEAD
- do not also fetch refs following "xxx"
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running 'git diff --quiet <file1> <file2>', if file1 or file2
is outside the repository, it will exit(0) even if the files differ.
It should exit(1) when they differ.
This happens because 'diff_no_index' looks at the 'found_changes'
member from 'diff_options' to determine if changes were made. This
is the wrong thing to do, since it is only set if xdiff is actually
run and it finds a change (the diff machinery will optimize out the
xdiff call when it is not necessary) and in that case HAS_CHANGED
flag needs to be taken into account.
Use diff_result_code() that knows all these details for the correct
exit value instead.
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When diff-no-index is given a relative path to a file outside the
repository, it aborts with error. However, if the file is given
using an absolute path, the diff runs as expected. The two cases
should be treated the same.
Tests and commit message by Tim Henigan.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit fe77b41 introduced a new attribute to let the linkgit macro
create cross-directory HTML references from the technical/ and howto/
subdirectories back to the main documentation. We define that attribute
to "../" on the command-line when building inside those subdirectories,
and otherwise leave it unset under the assumption that it would default
to being blank. Instead, asciidoc omits the link entirely, leading to
broken documentation. Fix this by defining git-relative-html-prefix to
blank in asciidoc.conf (and an instance on the command-line, when
present, will override it).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even with many new kinds of options, the command still takes the
single <tree> as the first argument.
Probably we would want to update the command to allow it to take
<tree>-ish at the end for consistency.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
verify_filename() can be called in two different contexts. Either we
just tried to interpret a string as an object name, and it fails, so
we try looking for a working tree file (i.e. we finished looking at
revs that come earlier on the command line, and the next argument
must be a pathname), or we _know_ that we are looking for a
pathname, and shouldn't even try interpreting the string as an
object name.
For example, with this change, we get:
$ git log COPYING HEAD:inexistant
fatal: HEAD:inexistant: no such path in the working tree.
Use '-- <path>...' to specify paths that do not exist locally.
$ git log HEAD:inexistant
fatal: Path 'inexistant' does not exist in 'HEAD'
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diagnose_invalid_sha1_path() is meant to be called to diagnose a
misspelt <treeish>:<pathname> when <pathname> does not exist in
<treeish>. However, the code may call it if <treeish>:<pathname> is
invalid (which triggers another call with only_to_die == 1), but for
another reason. This happens when calling e.g.
git log existing-file HEAD:existing-file
because existing-file is a path and not a revision, the code
verifies that the arguments that follow to be paths. This leads to
an incorrect message like "existing-file does not exist in HEAD",
even though the path exists in HEAD.
Check that the search for <pathname> in <treeish> fails before
triggering the diagnosis.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option to autosquash is only used in case of an interactive rebase.
When merges are preserved, rebase uses an interactive rebase internally,
but in this case autosquash should still be disabled.
Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not mix byte and line counts. Binary files have byte counts;
skip them when accumulating line insertions/deletions.
The regression was introduced in e18872b.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no point in running a pager when --quiet is given,
since we are producing no output. The regular diff code path
handles this already, because --quiet implies --exit-code,
and we check for --exit-code when deciding not to run the
pager.
However, the "quiet implies exit-code" logic is done in
diff_setup_done, and the no-index code path sets up its
pager before running diff_setup_done, and misses this case.
We can fix this by reordering our initialization.
Currently we do:
1. read command line arguments into diff_options
2. Set pager if EXIT_CODE not requested
3. always set EXIT_CODE, since we are emulating
traditional diff
4. call diff_setup_done
We can fix the problem by moving pager initialization (step
2) after step 4. But step 3 must come after step 2 (since we
want to know whether the _user_ requested --exit-code, not
whether we turned it on unconditionally). So we must move
both.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-diff does not rely on the git wrapper to setup its
pager; instead, it sets it up on its own after seeing
whether --quiet or --exit-code has been specified. After
diff_no_index was split off from cmd_diff, commit b3fde6c
(git diff --no-index: default to page like other diff
frontends, 2008-05-26) duplicated the one-liner from
cmd_diff to turn on the pager.
Later, commit 8f0359f (Allow pager of diff command be
enabled/disabled, 2008-07-21) taught the the version in
cmd_diff to respect the pager.diff config, but the version
in diff_no_index was left behind. This meant that
git -c pager.diff=0 diff a b
would not use a pager, but
git -c pager.diff=0 diff --no-index a b
would. Let's fix it by factoring out a common function.
While we're there, let's update the antiquated comment,
which claims that the pager interferes with propagating the
exit code; this has not been the case since ea27a18 (spawn
pager via run_command interface, 2008-07-22).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
v1.7.11-rc1~12^2~2 (2012-05-27) and friends split some git-svn code
into separate modules but did not update the fallback rules to install
them when NO_PERL_MAKEMAKER is set. Add the appropriate rules so
users without MakeMaker can use git-svn again.
Affected modules: Git::SVN::Prompt, Git::SVN::Fetcher,
Git::SVN::Editor, Git::SVN::Ra, Git::SVN::Memoize::YAML.
Reported-by: Adam Roben <adam@roben.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmali.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adding or removing a module requires modifying both files to support
builds with and without MakeMaker. Add a comment to remind patch
authors and reviewers at the crucial moment.
Longer term, it would be nicer to maintain a single list, perhaps in a
separate file used by both build systems.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When given a set of commits, cherry-pick will apply the changes for
all of them. Specifying a simple range will also work as expected.
This can lead the user to think that
git cherry-pick A B..C
may apply A and then B..C, but that is not what happens.
Instead the revs are given to a single invocation of rev-list, which
will consider A and C as positive revs and B as a negative one. The
commit A will not be used if it is an ancestor of B.
Add a note about this and add an example with this particular
syntax, which has shown up on the list a few times.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing description can be misleading and cause the reader to
think that --no-walk will do something if they specify a range in the
command line instead of a set of revs.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The simplify_merges() function needs to look at all history chain to
find the closest ancestor that is relevant after the simplification,
but after --first-parent traversal, side parents haven't been marked
for relevance (they are irrelevant by definition due to the nature
of first-parent-only traversal) nor culled from the parents list of
resulting commits.
We cannot simply remove these side parents from the parents list, as
the output phase still wants to see the parents. Instead, teach
simplify_one() and its callees to ignore the later parents.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
POSIX.1 (pax) is pretty clear on this:
The chksum field shall be the ISO/IEC 646:1991 standard IRV
representation of the octal value of the simple sum of all octets
in the header logical record. Each octet in the header shall be
treated as an unsigned value. These values shall be added to an
unsigned integer, initialized to zero, the precision of which is
not less than 17 bits. When calculating the checksum, the chksum
field is treated as if it were all <space> characters.
so is GNU:
http://www.gnu.org/software/tar/manual/html_node/Checksumming.html
Found by 7zip folks and reported by Rafał Mużyło.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 7f02f3d7 (completion: rename internal helpers _git and _gitk,
2012-05-19) renamed said functions to _main_git() and _main_gitk(),
respectively. By convention the name of our git-completion-specific
functions start with '_git' or '__git' prefix, so rename those
functions once again to put them back into our "namespace". Use the
two underscore prefix, because _git_main() could be mistaken for the
completion function of the (not yet existing) 'git main' command.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The If-Modified-Since support in Gitweb is conditional on the
availability of a date parser from either the HTTP::Date or
Time::ParseDate modules. If a suitable parser is not available,
then the corresponding 'modification times' tests should be skipped.
Introduce the DATE_PARSER test prerequisite and use it to skip
all of the dependent tests.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Peter Krefting
Michał Górny
Thomas Badie
Leila Muhtasib
Nguyễn Thái Ngọc Duy
Tim Henigan
Jeff King
Miklos Vajna
Matthieu Moy
Vincent van Ravesteijn
Alexander Strasser
Jonathan Nieder
Carlos Martín Nieto
Marco Paolone
SZEDER Gábor
Ramsay Jones
Jiang Xin