The GPG verification status shown in "%G?" pretty format specifier
was not rich enough to differentiate a signature made by an expired
key, a signature made by a revoked key, etc. New output letters
have been assigned to express them.
* mg/gpg-richer-status:
gpg-interface: use more status letters
According to gpg2's doc/DETAILS:
For each signature only one of the codes GOODSIG, BADSIG,
EXPSIG, EXPKEYSIG, REVKEYSIG or ERRSIG will be emitted.
gpg1 ("classic") behaves the same (although doc/DETAILS differs).
Currently, we parse gpg's status output for GOODSIG, BADSIG and
trust information and translate that into status codes G, B, U, N
for the %G? format specifier.
git-verify-* returns success in the GOODSIG case only. This is
somewhat in disagreement with gpg, which considers the first 5 of
the 6 above as VALIDSIG, but we err on the very safe side.
Introduce additional status codes E, X, Y, R for ERRSIG, EXPSIG,
EXPKEYSIG, and REVKEYSIG so that a user of %G? gets more information
about the absence of a 'G' on first glance.
Requested-by: Alex <agrambot@gmail.com>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call strbuf_add_unique_abbrev() to add abbreviated hashes to strbufs
instead of taking detours through find_unique_abbrev() and its static
buffer. This is shorter in most cases and a bit more efficient.
The changes here are not easily handled by a semantic patch because
they involve removing temporary variables and deconstructing format
strings for strbuf_addf().
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "%C(auto)" appears at the very beginning of the pretty format
string, it did not need to issue the reset sequence, but it did.
* rs/c-auto-resets-attributes:
pretty: avoid adding reset for %C(auto) if output is empty
We emit an escape sequence for resetting color and attribute for
%C(auto) to make sure automatic coloring is displayed as intended.
Stop doing that if the output strbuf is empty, i.e. when %C(auto)
appears at the start of the format string, because then there is no
need for a reset and we save a few bytes in the output.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pretty-format specifier "%C(auto)" used by the "log" family of
commands to enable coloring of the output is taught to also issue a
color-reset sequence to the output.
* rs/c-auto-resets-attributes:
pretty: let %C(auto) reset all attributes
Reset colors and attributes upon %C(auto) to enable full automatic
control over them; otherwise attributes like bold or reverse could
still be in effect from previous %C placeholders.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add and use a helper function that decodes the char value of two
hexadecimal digits. It returns a negative number on error, avoids
running over the end of the given string and doesn't shift negative
values.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call strbuf_add_unique_abbrev() to add abbreviated hashes to strbufs
instead of taking detours through find_unique_abbrev() and its static
buffer. This is shorter and a bit more efficient.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A helper function that takes the contents of a commit object and
finds its subject line did not ignore leading blank lines, as is
commonly done by other codepaths. Make it ignore leading blank
lines to match.
* js/find-commit-subject-ignore-leading-blanks:
reset --hard: skip blank lines when reporting the commit subject
sequencer: use skip_blank_lines() to find the commit subject
commit -C: skip blank lines at the beginning of the message
commit.c: make find_commit_subject() more robust
pretty: make the skip_blank_lines() function public
"log --graph --format=" learned that "%>|(N)" specifies the width
relative to the terminal's left edge, not relative to the area to
draw text that is to the right of the ancestry-graph section. It
also now accepts negative N that means the column limit is relative
to the right border.
* nd/graph-width-padded:
pretty.c: support <direction>|(<negative number>) forms
pretty: pass graph width to pretty formatting for use in '%>|(N)'
A helper function that takes the contents of a commit object and
finds its subject line did not ignore leading blank lines, as is
commonly done by other codepaths. Make it ignore leading blank
lines to match.
* js/find-commit-subject-ignore-leading-blanks:
reset --hard: skip blank lines when reporting the commit subject
sequencer: use skip_blank_lines() to find the commit subject
commit -C: skip blank lines at the beginning of the message
commit.c: make find_commit_subject() more robust
pretty: make the skip_blank_lines() function public
"log --graph --format=" learned that "%>|(N)" specifies the width
relative to the terminal's left edge, not relative to the area to
draw text that is to the right of the ancestry-graph section. It
also now accepts negative N that means the column limit is relative
to the right border.
* nd/graph-width-padded:
pretty.c: support <direction>|(<negative number>) forms
pretty: pass graph width to pretty formatting for use in '%>|(N)'
Teach format-patch and mailsplit (hence "am") how a line that
happens to begin with "From " in the e-mail message is quoted with
">", so that these lines can be restored to their original shape.
* ew/mboxrd-format-am:
am: support --patch-format=mboxrd
mailsplit: support unescaping mboxrd messages
pretty: support "mboxrd" output format
The commands in `git log` family take %C(auto) in a custom format
string. This unconditionally turned the color on, ignoring
--no-color or with --color=auto when the output is not connected to
a tty; this was corrected to make the format truly behave as
"auto".
* et/pretty-format-c-auto:
format_commit_message: honor `color=auto` for `%C(auto)`
This function will be used also in the find_commit_subject()
function.
While at it, rename the function to reflect that it skips not only
empty lines, but any lines consisting of only whitespace, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commands in `git log` family take %C(auto) in a custom format
string. This unconditionally turned the color on, ignoring
--no-color or with --color=auto when the output is not connected to
a tty; this was corrected to make the format truly behave as
"auto".
* et/pretty-format-c-auto:
format_commit_message: honor `color=auto` for `%C(auto)`
%>|(num), %><|(num) and %<|(num), where num is a positive number, sets a
fixed column from the screen's left border. There is no way for us to
specifiy a column relative to the right border, which is useful when you
want to make use of all terminal space (on big screens). Use negative
num for that. Inspired by Go's array syntax (*).
(*) I know Python has this first (or before Go, at least) but the idea
didn't occur to me until I learned Go.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pass graph width to pretty formatting, to make N in '%>|(N)'
include columns consumed by graph rendered when --graph option
is in use.
For example, in the output of
git log --all --graph --pretty='format: [%>|(20)%h] %ar%d'
this change will make all commit hashes align at 20th column from
the edge of the terminal, not from the edge of the graph.
Signed-off-by: Josef Kufner <josef@kufner.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This output format prevents format-patch output from breaking
readers if somebody copy+pasted an mbox into a commit message.
Unlike the traditional "mboxo" format, "mboxrd" is designed to
be fully-reversible. "mboxrd" also gracefully degrades to
showing extra ">" in existing "mboxo" readers.
This degradation is preferable to breaking message splitting
completely, a problem I've seen in "mboxcl" due to having
multiple, non-existent, or inaccurate Content-Length headers.
"mboxcl2" is a non-starter since it's inherits the problems
of "mboxcl" while being completely incompatible with existing
tooling based around mailsplit.
ref: http://homepage.ntlworld.com/jonathan.deboynepollard/FGA/mail-mbox-formats.html
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-log(1) documents that when specifying the `%C(auto)` format
placeholder will "turn on auto coloring on the next %placeholders
until the color is switched again."
However, when `%C(auto)` is used, the present implementation will turn
colors on unconditionally (even if the color configuration is turned off
for the current context - for example, `--no-color` was specified or the
color is `auto` and the output is not a tty).
Update `format_commit_one` to examine the current context when a format
string of `%C(auto)` is specified, which ensures that we will not
unconditionally write colors. This brings that behavior in line with
the behavior of `%C(auto,<colorname>)`, and allows the user the ability
to specify that color should be displayed only when the output is a
tty.
Additionally, add a test for `%C(auto)` and update the existing tests
for `%C(auto,...)` as they were misidentified as being applicable to
`%C(auto)`.
Tests from Jeff King.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Edward Thomson <ethomson@edwardthomson.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the local convention of the project is to use tab width that is
not 8, it may make sense to allow "git log --expand-tabs=<n>" to
tweak the output to match it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log --pretty={medium,full,fuller}" and "git log" by default
prepend 4 spaces to the log message, so it makes sense to enable
the new "expand-tabs" facility by default for these formats.
Add --no-expand-tabs option to override the new default.
The change alone breaks a test in t4201 that runs "git shortlog"
on the output from "git log", and expects that the output from
"git log" does not do such a tab expansion. Adjust the test to
explicitly disable expand-tabs with --no-expand-tabs.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A commit log message sometimes tries to line things up using tabs,
assuming fixed-width font with the standard 8-place tab settings.
Viewing such a commit however does not work well in "git log", as
we indent the lines by prefixing 4 spaces in front of them.
This should all line up:
Column 1 Column 2
-------- --------
A B
ABCD EFGH
SPACES Instead of Tabs
Even with multi-byte UTF8 characters:
Column 1 Column 2
-------- --------
Ä B
åäö 100
A Møøse once bit my sister..
Tab-expand the lines in "git log --expand-tabs" output before
prefixing 4 spaces.
This is based on the patch by Linus Torvalds, but at this step, we
require an explicit command line option to enable the behaviour.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert all instances of get_object_hash to use an appropriate reference
to the hash member of the oid member of struct object. This provides no
functional change, as it is essentially a macro substitution.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
struct object is one of the major data structures dealing with object
IDs. Convert it to use struct object_id instead of an unsigned char
array. Convert get_object_hash to refer to the new member as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
Convert most instances where the sha1 member of struct object is
dereferenced to use get_object_hash. Most instances that are passed to
functions that have versions taking struct object_id, such as
get_sha1_hex/get_oid_hex, or instances that can be trivially converted
to use struct object_id instead, are not converted.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
In preparation for adding date modes that may carry extra
information beyond the mode itself, this patch converts the
date_mode enum into a struct.
Most of the conversion is fairly straightforward; we pass
the struct as a pointer and dereference the type field where
necessary. Locations that declare a date_mode can use a "{}"
constructor. However, the tricky case is where we use the
enum labels as constants, like:
show_date(t, tz, DATE_NORMAL);
Ideally we could say:
show_date(t, tz, &{ DATE_NORMAL });
but of course C does not allow that. Likewise, we cannot
cast the constant to a struct, because we need to pass an
actual address. Our options are basically:
1. Manually add a "struct date_mode d = { DATE_NORMAL }"
definition to each caller, and pass "&d". This makes
the callers uglier, because they sometimes do not even
have their own scope (e.g., they are inside a switch
statement).
2. Provide a pre-made global "date_normal" struct that can
be passed by address. We'd also need "date_rfc2822",
"date_iso8601", and so forth. But at least the ugliness
is defined in one place.
3. Provide a wrapper that generates the correct struct on
the fly. The big downside is that we end up pointing to
a single global, which makes our wrapper non-reentrant.
But show_date is already not reentrant, so it does not
matter.
This patch implements 3, along with a minor macro to keep
the size of the callers sane.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code cleanups.
* rs/simple-cleanups:
sha1_name: use strlcpy() to copy strings
pretty: use starts_with() to check for a prefix
for-each-ref: use skip_prefix() to avoid duplicate string comparison
connect: use strcmp() for string comparison
Simplify the code and avoid duplication by using starts_with() instead
of strlen() and strncmp() to check if a line starts with "encoding ".
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally the color-parsing function was used only for
config variables. It made sense to pass the variable name so
that the die() message could be something like:
$ git -c color.branch.plain=bogus branch
fatal: bad color value 'bogus' for variable 'color.branch.plain'
These days we call it in other contexts, and the resulting
error messages are a little confusing:
$ git log --pretty='%C(bogus)'
fatal: bad color value 'bogus' for variable '--pretty format'
$ git config --get-color foo.bar bogus
fatal: bad color value 'bogus' for variable 'command line'
This patch teaches color_parse to complain only about the
value, and then return an error code. Config callers can
then propagate that up to the config parser, which mentions
the variable name. Other callers can provide a custom
message. After this patch these three cases now look like:
$ git -c color.branch.plain=bogus branch
error: invalid color value: bogus
fatal: unable to parse 'color.branch.plain' from command-line config
$ git log --pretty='%C(bogus)'
error: invalid color value: bogus
fatal: unable to parse --pretty format
$ git config --get-color foo.bar bogus
error: invalid color value: bogus
fatal: unable to parse default color value
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Continue where ae021d87 (use skip_prefix to avoid magic numbers) left off
and use skip_prefix() in more places for determining the lengths of prefix
strings to avoid using dependent constants and other indirect methods.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pretty-format specifier "%d", which expanded to " (tagname)"
for a tagged commit, gained a cousin "%D" that just gives the
"tagname" without frills.
* hj/pretty-naked-decoration:
pretty: add %D format specifier
Code clean-up.
* jk/commit-author-parsing:
determine_author_info(): copy getenv output
determine_author_info(): reuse parsing functions
date: use strbufs in date-formatting functions
record_author_date(): use find_commit_header()
record_author_date(): fix memory leak on malformed commit
commit: provide a function to find a header in a buffer
"log --date=iso" uses a slight variant of ISO 8601 format that is
made more human readable. A new "--date=iso-strict" option gives
datetime output that is more strictly conformant.
* bb/date-iso-strict:
pretty: provide a strict ISO 8601 date format
Add a new format specifier, '%D' that is identical in behaviour to '%d',
except that it does not include the ' (' prefix or ')' suffix provided
by '%d'.
Signed-off-by: Harry Jeffery <harry@exec64.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's "ISO" date format does not really conform to the ISO 8601
standard due to small differences, and it cannot be parsed by ISO
8601-only parsers, e.g. those of XML toolchains.
The output from "--date=iso" deviates from ISO 8601 in these ways:
- a space instead of the `T` date/time delimiter
- a space between time and time zone
- no colon between hours and minutes of the time zone
Add a strict ISO 8601 date format for displaying committer and
author dates. Use the '%aI' and '%cI' format specifiers and add
'--date=iso-strict' or '--date=iso8601-strict' date format names.
See http://thread.gmane.org/gmane.comp.version-control.git/255879 and
http://thread.gmane.org/gmane.comp.version-control.git/52414/focus=52585
for discussion.
Signed-off-by: Beat Bolli <bbolli@ewanet.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually when we parse a commit, we read it line by line and
handle each individual line (e.g., parse_commit and
parse_commit_header). Sometimes, however, we only care
about extracting a single header. Code in this situation is
stuck doing an ad-hoc parse of the commit buffer.
Let's provide a reusable function to locate a header within
the commit. The code is modeled after pretty.c's
get_header, which is used to extract the encoding.
Since some callers may not have the "struct commit" to go
along with the buffer, we drop that parameter. The only
thing lost is a warning for truncated commits, but that's
OK. This shouldn't happen in practice, and even if it does,
there's no particular reason that this function needs to
complain about it. It either finds the header it was asked
for, or it doesn't (and in the latter case, the caller will
typically complain).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git_pretty_formats_config()` continues without checking git_config_string's
return value which can lead to a SEGFAULT. Instead return -1 when
git_config_string fails signalling `git_config()` to die printing the location
of the erroneous variable.
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user provides an empty format with "--format=", we
end up putting in extra whitespace that the user cannot
prevent. This comes from two places:
1. If the format is missing a terminating newline, we add
one automatically. This makes sense for --format=%h, but
not for a truly empty format.
2. We add an extra newline between the pretty-printed
format and a diff or diffstat. If the format is empty,
there's no point in doing so if there's nothing to
separate.
With this patch, one can get a diff with no other cruft out
of "diff-tree --format= $commit".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until now, we treated "--pretty=" or "--format=" as "give me
the default format". This was not planned nor documented,
but only what happened to work due to our parsing of
"--pretty" (which should give the default format).
Let's instead let these be an actual empty userformat.
Otherwise one must write out the annoyingly long
"--pretty=tformat:" to get the same behavior.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rs/code-cleaning:
remote-testsvn: use internal argv_array of struct child_process in cmd_import()
bundle: use internal argv_array of struct child_process in create_bundle()
fast-import: use hashcmp() for SHA1 hash comparison
transport: simplify fetch_objs_via_rsync() using argv_array
run-command: use internal argv_array of struct child_process in run_hook_ve()
use commit_list_count() to count the members of commit_lists
strbuf: use strbuf_addstr() for adding C strings
Call commit_list_count() instead of open-coding it repeatedly.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Michael J Gruber
René Scharfe
Johannes Schindelin
Nguyễn Thái Ngọc Duy
Josef Kufner
Eric Wong
Edward Thomson
Linus Torvalds
brian m. carlson
Jeff King
Harry Jeffery
Beat Bolli
Tanay Abhra